API tools faq
paste
Guest User

Untitled

a guest
Oct 8th, 2020
31
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.18 KB | None | 0 0
raw download clone embed print report
  1. dmesg
  2. [ 0.000000] Linux version 4.14.180 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 SMP Sat May 16 18:32:20 2020
  3. [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  4. [ 0.000000] bootconsole [early0] enabled
  5. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  6. [ 0.000000] MIPS: machine is Xiaomi Mi Router 3G
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 10000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] VPE topology {2,2} total 4
  11. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  12. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  13. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
  16. [ 0.000000] HighMem empty
  17. [ 0.000000] Movable zone start for each node
  18. [ 0.000000] Early memory node ranges
  19. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
  21. [ 0.000000] On node 0 totalpages: 65536
  22. [ 0.000000] free_area_init_node: node 0, pgdat 805727a0, node_mem_map 81003000
  23. [ 0.000000] Normal zone: 512 pages used for memmap
  24. [ 0.000000] Normal zone: 0 pages reserved
  25. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  26. [ 0.000000] random: get_random_bytes called from 0x80575744 with crng_init=0
  27. [ 0.000000] percpu: Embedded 14 pages/cpu s26224 r8192 d22928 u57344
  28. [ 0.000000] pcpu-alloc: s26224 r8192 d22928 u57344 alloc=14*4096
  29. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  30. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
  31. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  32. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  33. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  34. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  35. [ 0.000000] Writing ErrCtl register=0005c240
  36. [ 0.000000] Readback ErrCtl register=0005c240
  37. [ 0.000000] Memory: 252460K/262144K available (4748K kernel code, 239K rwdata, 588K rodata, 1260K init, 255K bss, 9684K reserved, 0K cma-reserved, 0K highmem)
  38. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [ 0.000000] Hierarchical RCU implementation.
  40. [ 0.000000] NR_IRQS: 256
  41. [ 0.000000] CPU Clock: 880MHz
  42. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
  43. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
  44. [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
  45. [ 0.007816] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  46. [ 0.073987] pid_max: default: 32768 minimum: 301
  47. [ 0.078760] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.085267] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.094083] Hierarchical SRCU implementation.
  50. [ 0.099248] smp: Bringing up secondary CPUs ...
  51. [ 0.397795] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  52. [ 0.397804] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  53. [ 0.397816] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  54. [ 0.397953] CPU1 revision is: 0001992f (MIPS 1004Kc)
  55. [ 0.164003] Synchronize counters for CPU 1: done.
  56. [ 0.424683] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  57. [ 0.424691] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  58. [ 0.424698] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  59. [ 0.424767] CPU2 revision is: 0001992f (MIPS 1004Kc)
  60. [ 0.255069] Synchronize counters for CPU 2: done.
  61. [ 0.513977] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  62. [ 0.513985] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  63. [ 0.513991] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  64. [ 0.514063] CPU3 revision is: 0001992f (MIPS 1004Kc)
  65. [ 0.340251] Synchronize counters for CPU 3: done.
  66. [ 0.370101] smp: Brought up 1 node, 4 CPUs
  67. [ 0.378012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  68. [ 0.387798] futex hash table entries: 1024 (order: 3, 32768 bytes)
  69. [ 0.394103] pinctrl core: initialized pinctrl subsystem
  70. [ 0.400855] NET: Registered protocol family 16
  71. [ 0.410958] FPU Affinity set after 11720 emulations
  72. [ 0.411684] pull PCIe RST: RALINK_RSTCTRL = 0
  73. [ 0.716401] release PCIe RST: RALINK_RSTCTRL = 7000000
  74. [ 0.721454] ***** Xtal 40MHz *****
  75. [ 0.724804] release PCIe RST: RALINK_RSTCTRL = 7000000
  76. [ 0.729901] Port 0 N_FTS = 1b105000
  77. [ 0.733369] Port 1 N_FTS = 1b105000
  78. [ 0.736811] Port 2 N_FTS = 1b102800
  79. [ 1.892153] PCIE2 no card, disable it(RST&CLK)
  80. [ 1.896515] -> 21007f2
  81. [ 1.898914] PCIE0 enabled
  82. [ 1.901505] PCIE1 enabled
  83. [ 1.904112] PCI host bridge /pcie@1e140000 ranges:
  84. [ 1.908885] MEM 0x0000000060000000..0x000000006fffffff
  85. [ 1.914043] IO 0x000000001e160000..0x000000001e16ffff
  86. [ 1.919238] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
  87. [ 1.935637] mt7621_gpio 1e000600.gpio: registering 32 gpios
  88. [ 1.941435] mt7621_gpio 1e000600.gpio: registering 32 gpios
  89. [ 1.947227] mt7621_gpio 1e000600.gpio: registering 32 gpios
  90. [ 1.954796] PCI host bridge to bus 0000:00
  91. [ 1.958911] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  92. [ 1.965681] pci_bus 0000:00: root bus resource [io 0xffffffff]
  93. [ 1.971572] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  94. [ 1.978294] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  95. [ 1.986218] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  96. [ 1.986258] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  97. [ 1.986270] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
  98. [ 1.986336] pci 0000:00:00.0: supports D1
  99. [ 1.986345] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  100. [ 1.986601] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  101. [ 1.986643] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  102. [ 1.986662] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
  103. [ 1.986723] pci 0000:00:01.0: supports D1
  104. [ 1.986733] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  105. [ 1.987198] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
  106. [ 1.987256] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  107. [ 1.987388] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  108. [ 1.987594] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  109. [ 1.987851] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
  110. [ 1.987917] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  111. [ 1.987963] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  112. [ 1.988057] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  113. [ 1.988246] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  114. [ 1.988275] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
  115. [ 1.988358] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  116. [ 1.994874] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  117. [ 2.001824] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  118. [ 2.008346] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  119. [ 2.015289] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  120. [ 2.022006] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
  121. [ 2.028764] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
  122. [ 2.035913] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
  123. [ 2.042674] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
  124. [ 2.049395] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
  125. [ 2.056149] pci 0000:00:00.0: PCI bridge to [bus 01]
  126. [ 2.061058] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
  127. [ 2.067827] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
  128. [ 2.075063] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
  129. [ 2.082237] pci 0000:00:01.0: PCI bridge to [bus 02]
  130. [ 2.087144] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
  131. [ 2.093904] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref]
  132. [ 2.102465] clocksource: Switched to clocksource GIC
  133. [ 2.108975] NET: Registered protocol family 2
  134. [ 2.114035] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  135. [ 2.120922] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  136. [ 2.127379] TCP: Hash tables configured (established 2048 bind 2048)
  137. [ 2.133801] UDP hash table entries: 256 (order: 1, 8192 bytes)
  138. [ 2.139567] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  139. [ 2.146047] NET: Registered protocol family 1
  140. [ 2.150369] PCI: CLS 0 bytes, default 32
  141. [ 2.382429] 4 CPUs re-calibrate udelay(lpj = 2924544)
  142. [ 2.388892] Crashlog allocated RAM at address 0x3f00000
  143. [ 2.394457] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  144. [ 2.402843] random: fast init done
  145. [ 2.406167] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  146. [ 2.406178] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  147. [ 2.425708] io scheduler noop registered
  148. [ 2.429547] io scheduler deadline registered (default)
  149. [ 2.435813] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  150. [ 2.445683] console [ttyS0] disabled
  151. [ 2.449240] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  152. [ 2.458264] console [ttyS0] enabled
  153. [ 2.465134] bootconsole [early0] disabled
  154. [ 2.475365] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  155. [ 2.482546] Enable NFI Clock
  156. [ 2.485419] # MTK NAND # : Use HW ECC
  157. [ 2.489080] Device found in MTK table, ID: c8d1, EXT_ID: 809540
  158. [ 2.494988] Support this Device in MTK table! c8d1
  159. [ 2.499935] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  160. [ 2.506411] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
  161. [ 2.512745] nand: ESMT NAND 128MiB 3,3V 8-bit
  162. [ 2.517080] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  163. [ 2.524643] Scanning device for bad blocks
  164. [ 2.673601] 10 fixed-partitions partitions found on MTD device MT7621-NAND
  165. [ 2.680441] Creating 10 MTD partitions on "MT7621-NAND":
  166. [ 2.685753] 0x000000000000-0x000000080000 : "Bootloader"
  167. [ 2.692176] 0x000000080000-0x0000000c0000 : "Config"
  168. [ 2.698207] 0x0000000c0000-0x000000100000 : "Bdata"
  169. [ 2.704112] 0x000000100000-0x000000140000 : "Factory"
  170. [ 2.710155] 0x000000140000-0x000000180000 : "crash"
  171. [ 2.716069] 0x000000180000-0x0000001c0000 : "crash_syslog"
  172. [ 2.722653] 0x0000001c0000-0x000000200000 : "reserved0"
  173. [ 2.728869] 0x000000200000-0x000000600000 : "kernel_stock"
  174. [ 2.735453] 0x000000600000-0x000000a00000 : "kernel"
  175. [ 2.741468] 0x000000a00000-0x000007f80000 : "ubi"
  176. [ 2.748184] [mtk_nand] probe successfully!
  177. [ 2.753030] Signature matched and data read!
  178. [ 2.757277] load_fact_bbt success 1023
  179. [ 2.761797] libphy: Fixed MDIO Bus: probed
  180. [ 2.835021] libphy: mdio: probed
  181. [ 4.238674] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  182. [ 4.245375] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
  183. [ 4.256287] NET: Registered protocol family 10
  184. [ 4.262333] Segment Routing with IPv6
  185. [ 4.266117] NET: Registered protocol family 17
  186. [ 4.270614] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  187. [ 4.283526] 8021q: 802.1Q VLAN Support v1.8
  188. [ 4.290706] UBI: auto-attach mtd9
  189. [ 4.294086] ubi0: attaching mtd9
  190. [ 4.461954] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
  191. [ 4.468049] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
  192. [ 5.380722] ubi0: scanning is finished
  193. [ 5.400347] ubi0: attached mtd9 (name "ubi", size 117 MiB)
  194. [ 5.405851] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  195. [ 5.412707] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  196. [ 5.419460] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  197. [ 5.426400] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
  198. [ 5.432376] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  199. [ 5.439576] ubi0: max/mean erase counter: 10/7, WL threshold: 4096, image sequence number: 1116216208
  200. [ 5.448765] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
  201. [ 5.457978] ubi0: background thread "ubi_bgt0d" started, PID 396
  202. [ 5.459915] block ubiblock0_0: created from ubi0:0(rootfs)
  203. [ 5.469470] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  204. [ 5.476429] hctosys: unable to open rtc device (rtc0)
  205. [ 5.481711] usb_vbus: disabling
  206. [ 5.492036] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  207. [ 5.503432] Freeing unused kernel memory: 1260K
  208. [ 5.507961] This architecture does not have kernel memory protection.
  209. [ 5.984549] init: Console is alive
  210. [ 5.988189] init: - watchdog -
  211. [ 6.597407] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  212. [ 6.704120] usbcore: registered new interface driver usbfs
  213. [ 6.709674] usbcore: registered new interface driver hub
  214. [ 6.715161] usbcore: registered new device driver usb
  215. [ 6.727465] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
  216. [ 6.736455] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  217. [ 6.741778] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
  218. [ 6.752603] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
  219. [ 6.761773] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
  220. [ 6.768475] hub 1-0:1.0: USB hub found
  221. [ 6.772300] hub 1-0:1.0: 2 ports detected
  222. [ 6.776889] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  223. [ 6.782197] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
  224. [ 6.789687] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
  225. [ 6.796292] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  226. [ 6.805229] hub 2-0:1.0: USB hub found
  227. [ 6.809045] hub 2-0:1.0: 1 port detected
  228. [ 6.817992] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  229. [ 6.842787] init: - preinit -
  230. [ 7.537446] mtk_soc_eth 1e100000.ethernet: PPE started
  231. [ 7.612721] random: procd: uninitialized urandom read (4 bytes read)
  232. [ 10.759225] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 502
  233. [ 10.832597] UBIFS (ubi0:1): recovery needed
  234. [ 11.021139] UBIFS (ubi0:1): recovery completed
  235. [ 11.025741] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  236. [ 11.033564] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  237. [ 11.043456] UBIFS (ubi0:1): FS size: 112246784 bytes (107 MiB, 884 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
  238. [ 11.054056] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  239. [ 11.060644] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 435BB640-DE39-4E34-83EC-818901EAC999, small LPT model
  240. [ 11.077385] mount_root: switching to ubifs overlay
  241. [ 11.110231] urandom-seed: Seeding with /etc/urandom.seed
  242. [ 11.204691] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
  243. [ 11.219790] procd: - early -
  244. [ 11.222832] procd: - watchdog -
  245. [ 11.912643] procd: - watchdog -
  246. [ 11.916117] procd: - ubus -
  247. [ 11.986085] random: ubusd: uninitialized urandom read (4 bytes read)
  248. [ 11.997199] random: ubusd: uninitialized urandom read (4 bytes read)
  249. [ 12.003998] random: ubusd: uninitialized urandom read (4 bytes read)
  250. [ 12.011198] procd: - init -
  251. [ 12.564959] kmodloader: loading kernel modules from /etc/modules.d/*
  252. [ 12.635723] ip6_tables: (C) 2000-2006 Netfilter Core Team
  253. [ 12.648208] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
  254. [ 12.655886] Backport generated by backports.git v4.19.120-1-0-g60c3a249
  255. [ 12.664291] ip_tables: (C) 2000-2006 Netfilter Core Team
  256. [ 12.676226] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  257. [ 12.719235] xt_time: kernel timezone is -0000
  258. [ 12.783305] bus=0x1, slot = 0x0, irq=0xff
  259. [ 12.784223] urngd: v1.0.2 started.
  260. [ 12.790811] mt7603e 0000:01:00.0: ASIC revision: 76030010
  261. [ 12.922362] random: crng init done
  262. [ 12.925787] random: 6 urandom warning(s) missed due to ratelimiting
  263. [ 13.823736] mt7603e 0000:01:00.0: Firmware Version: ap_pcie
  264. [ 13.829307] mt7603e 0000:01:00.0: Build Time: 20160107100755
  265. [ 13.872461] mt7603e 0000:01:00.0: firmware init done
  266. [ 14.046057] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  267. [ 14.059143] bus=0x2, slot = 0x1, irq=0xff
  268. [ 14.063475] mt76x2e 0000:02:00.0: ASIC revision: 76120044
  269. [ 14.776804] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
  270. [ 14.786459] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
  271. [ 14.791934] mt76x2e 0000:02:00.0: Build: 1
  272. [ 14.796070] mt76x2e 0000:02:00.0: Build Time: 201507311614____
  273. [ 14.822459] mt76x2e 0000:02:00.0: Firmware running!
  274. [ 14.830238] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  275. [ 14.837505] PPP generic driver version 2.4.2
  276. [ 14.843218] NET: Registered protocol family 24
  277. [ 14.850424] kmodloader: done loading kernel modules from /etc/modules.d/*
  278. [ 21.038727] mtk_soc_eth 1e100000.ethernet: PPE started
  279. [ 21.051424] device eth0 entered promiscuous mode
  280. [ 21.057397] br-lan: port 1(eth0.1) entered blocking state
  281. [ 21.062896] br-lan: port 1(eth0.1) entered disabled state
  282. [ 21.069036] device eth0.1 entered promiscuous mode
  283. [ 21.077146] br-lan: port 1(eth0.1) entered blocking state
  284. [ 21.082610] br-lan: port 1(eth0.1) entered forwarding state
  285. [ 21.088766] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  286. [ 22.083256] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  287. [ 23.035275] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  288. [ 23.445381] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  289. [ 23.451381] br-lan: port 2(wlan0) entered blocking state
  290. [ 23.456719] br-lan: port 2(wlan0) entered disabled state
  291. [ 23.462555] device wlan0 entered promiscuous mode
  292. [ 23.467478] br-lan: port 2(wlan0) entered blocking state
  293. [ 23.472816] br-lan: port 2(wlan0) entered forwarding state
  294. [ 23.478938] br-lan: port 2(wlan0) entered disabled state
  295. [ 23.485647] br-lan: port 3(wlan1) entered blocking state
  296. [ 23.490968] br-lan: port 3(wlan1) entered disabled state
  297. [ 23.497037] device wlan1 entered promiscuous mode
  298. [ 24.132934] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  299. [ 24.139611] br-lan: port 2(wlan0) entered blocking state
  300. [ 24.144950] br-lan: port 2(wlan0) entered forwarding state
  301. [ 24.886500] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  302. [ 24.893459] br-lan: port 3(wlan1) entered blocking state
  303. [ 24.898786] br-lan: port 3(wlan1) entered forwarding state
  304.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!