dotancohen

dmesg

Jan 6th, 2017
286
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] node 0: [mem 0x00000000c5adb000-0x00000000c5f27fff]
  2. [ 0.000000] node 0: [mem 0x00000000c6351000-0x00000000d84f6fff]
  3. [ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
  4. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
  5. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
  6. [ 0.000000] On node 0 totalpages: 2063972
  7. [ 0.000000] DMA zone: 64 pages used for memmap
  8. [ 0.000000] DMA zone: 21 pages reserved
  9. [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
  10. [ 0.000000] DMA32 zone: 13764 pages used for memmap
  11. [ 0.000000] DMA32 zone: 880840 pages, LIFO batch:31
  12. [ 0.000000] Normal zone: 18424 pages used for memmap
  13. [ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
  14. [ 0.000000] Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
  15. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  16. [ 0.000000] ACPI: Local APIC address 0xfee00000
  17. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  18. [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
  19. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  20. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  21. [ 0.000000] ACPI: IRQ0 used by override.
  22. [ 0.000000] ACPI: IRQ9 used by override.
  23. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  24. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  25. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  26. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  27. [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  28. [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  29. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  30. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  31. [ 0.000000] PM: Registered nosave memory: [mem 0xc5ad4000-0xc5adafff]
  32. [ 0.000000] PM: Registered nosave memory: [mem 0xc5f28000-0xc6350fff]
  33. [ 0.000000] PM: Registered nosave memory: [mem 0xd84f7000-0xd89d5fff]
  34. [ 0.000000] PM: Registered nosave memory: [mem 0xd89d6000-0xd89eefff]
  35. [ 0.000000] PM: Registered nosave memory: [mem 0xd89ef000-0xd8f28fff]
  36. [ 0.000000] PM: Registered nosave memory: [mem 0xd8f29000-0xd9ffefff]
  37. [ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
  38. [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
  39. [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
  40. [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  41. [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  42. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  43. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
  44. [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
  45. [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
  46. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  47. [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  48. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  49. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
  50. [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  51. [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
  52. [ 0.000000] Booting paravirtualized kernel on bare hardware
  53. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  54. [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
  55. [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021fa00000 s98008 r8192 d28968 u524288
  56. [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
  57. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  58. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2031699
  59. [ 0.000000] Policy zone: Normal
  60. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=e22e3458-8f7b-433c-bf4e-759c3de6d7fd ro quiet splash vt.handoff=7
  61. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  62. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  63. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  64. [ 0.000000] Memory: 8002400K/8255888K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 253488K reserved, 0K cma-reserved)
  65. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  66. [ 0.000000] Hierarchical RCU implementation.
  67. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  68. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  69. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  70. [ 0.000000] NR_IRQS:16640 nr_irqs:456 16
  71. [ 0.000000] vt handoff: transparent VT on vt#7
  72. [ 0.000000] Console: colour dummy device 80x25
  73. [ 0.000000] console [tty0] enabled
  74. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  75. [ 0.000000] hpet clockevent registered
  76. [ 0.000000] tsc: Fast TSC calibration using PIT
  77. [ 0.000000] tsc: Detected 3192.646 MHz processor
  78. [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.29 BogoMIPS (lpj=12770584)
  79. [ 0.000023] pid_max: default: 32768 minimum: 301
  80. [ 0.000027] ACPI: Core revision 20150930
  81. [ 0.007860] ACPI: 5 ACPI AML tables successfully acquired and loaded
  82. [ 0.007875] Security Framework initialized
  83. [ 0.007876] Yama: becoming mindful.
  84. [ 0.007887] AppArmor: AppArmor initialized
  85. [ 0.008245] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  86. [ 0.009358] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  87. [ 0.009841] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  88. [ 0.009848] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  89. [ 0.009999] Initializing cgroup subsys io
  90. [ 0.010001] Initializing cgroup subsys memory
  91. [ 0.010005] Initializing cgroup subsys devices
  92. [ 0.010007] Initializing cgroup subsys freezer
  93. [ 0.010008] Initializing cgroup subsys net_cls
  94. [ 0.010010] Initializing cgroup subsys perf_event
  95. [ 0.010011] Initializing cgroup subsys net_prio
  96. [ 0.010013] Initializing cgroup subsys hugetlb
  97. [ 0.010014] Initializing cgroup subsys pids
  98. [ 0.010031] CPU: Physical Processor ID: 0
  99. [ 0.010031] CPU: Processor Core ID: 0
  100. [ 0.010035] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  101. [ 0.010035] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  102. [ 0.010790] mce: CPU supports 9 MCE banks
  103. [ 0.010801] CPU0: Thermal monitoring enabled (TM1)
  104. [ 0.010808] process: using mwait in idle threads
  105. [ 0.010810] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
  106. [ 0.010811] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
  107. [ 0.011073] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
  108. [ 0.015054] ftrace: allocating 32047 entries in 126 pages
  109. [ 0.024688] smpboot: Max logical packages: 1
  110. [ 0.024689] smpboot: APIC(0) Converting physical 0 to logical package 0
  111. [ 0.024755] x2apic: IRQ remapping doesn't support X2APIC mode
  112. [ 0.025144] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  113. [ 0.064829] TSC deadline timer enabled
  114. [ 0.064831] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
  115. [ 0.064845] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
  116. [ 0.064859] ... version: 3
  117. [ 0.064860] ... bit width: 48
  118. [ 0.064860] ... generic registers: 8
  119. [ 0.064861] ... value mask: 0000ffffffffffff
  120. [ 0.064862] ... max period: 0000ffffffffffff
  121. [ 0.064862] ... fixed-purpose events: 3
  122. [ 0.064863] ... event mask: 00000007000000ff
  123. [ 0.065434] x86: Booting SMP configuration:
  124. [ 0.065435] .... node #0, CPUs: #1
  125. [ 0.068539] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  126. [ 0.068590] #2 #3
  127. [ 0.074888] x86: Booted up 1 node, 4 CPUs
  128. [ 0.074890] smpboot: Total of 4 processors activated (25541.16 BogoMIPS)
  129. [ 0.077668] devtmpfs: initialized
  130. [ 0.079251] evm: security.selinux
  131. [ 0.079252] evm: security.SMACK64
  132. [ 0.079253] evm: security.SMACK64EXEC
  133. [ 0.079254] evm: security.SMACK64TRANSMUTE
  134. [ 0.079254] evm: security.SMACK64MMAP
  135. [ 0.079255] evm: security.ima
  136. [ 0.079255] evm: security.capability
  137. [ 0.079295] PM: Registering ACPI NVS region [mem 0xc5ad4000-0xc5adafff] (28672 bytes)
  138. [ 0.079297] PM: Registering ACPI NVS region [mem 0xd89ef000-0xd8f28fff] (5480448 bytes)
  139. [ 0.079395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  140. [ 0.079454] pinctrl core: initialized pinctrl subsystem
  141. [ 0.079537] RTC time: 7:17:38, date: 01/06/17
  142. [ 0.079619] NET: Registered protocol family 16
  143. [ 0.089580] cpuidle: using governor ladder
  144. [ 0.105583] cpuidle: using governor menu
  145. [ 0.105586] PCCT header not found.
  146. [ 0.105641] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  147. [ 0.105642] ACPI: bus type PCI registered
  148. [ 0.105643] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  149. [ 0.105694] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  150. [ 0.105696] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  151. [ 0.105702] PCI: Using configuration type 1 for base access
  152. [ 0.105799] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  153. [ 0.105802] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
  154. [ 0.121826] ACPI: Added _OSI(Module Device)
  155. [ 0.121828] ACPI: Added _OSI(Processor Device)
  156. [ 0.121828] ACPI: Added _OSI(3.0 _SCP Extensions)
  157. [ 0.121829] ACPI: Added _OSI(Processor Aggregator Device)
  158. [ 0.124374] ACPI: Executed 1 blocks of module-level executable AML code
  159. [ 0.126139] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  160. [ 0.126618] ACPI: Dynamic OEM Table Load:
  161. [ 0.126622] ACPI: SSDT 0xFFFF880215D51400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
  162. [ 0.127065] ACPI: Dynamic OEM Table Load:
  163. [ 0.127068] ACPI: SSDT 0xFFFF88021638A000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
  164. [ 0.127536] ACPI: Dynamic OEM Table Load:
  165. [ 0.127538] ACPI: SSDT 0xFFFF8802162EF800 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
  166. [ 0.128227] ACPI: Interpreter enabled
  167. [ 0.128244] ACPI: (supports S0 S3 S4 S5)
  168. [ 0.128245] ACPI: Using IOAPIC for interrupt routing
  169. [ 0.128262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  170. [ 0.133720] ACPI: Power Resource [FN00] (off)
  171. [ 0.133771] ACPI: Power Resource [FN01] (off)
  172. [ 0.133819] ACPI: Power Resource [FN02] (off)
  173. [ 0.133868] ACPI: Power Resource [FN03] (off)
  174. [ 0.133915] ACPI: Power Resource [FN04] (off)
  175. [ 0.134468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  176. [ 0.134472] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  177. [ 0.134618] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
  178. [ 0.134700] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
  179. [ 0.134701] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  180. [ 0.134946] PCI host bridge to bus 0000:00
  181. [ 0.134948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  182. [ 0.134949] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  183. [ 0.134950] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  184. [ 0.134951] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  185. [ 0.134952] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  186. [ 0.134953] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  187. [ 0.134954] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  188. [ 0.134955] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
  189. [ 0.134956] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
  190. [ 0.134957] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
  191. [ 0.134958] pci_bus 0000:00: root bus resource [bus 00-3e]
  192. [ 0.134964] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
  193. [ 0.135023] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
  194. [ 0.135048] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  195. [ 0.135102] pci 0000:00:01.0: System wakeup disabled by ACPI
  196. [ 0.135131] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
  197. [ 0.135140] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
  198. [ 0.135145] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
  199. [ 0.135148] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
  200. [ 0.135215] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
  201. [ 0.135236] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
  202. [ 0.135278] pci 0000:00:14.0: PME# supported from D3hot D3cold
  203. [ 0.135303] pci 0000:00:14.0: System wakeup disabled by ACPI
  204. [ 0.135329] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
  205. [ 0.135351] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
  206. [ 0.135396] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  207. [ 0.135450] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
  208. [ 0.135473] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
  209. [ 0.135534] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  210. [ 0.135568] pci 0000:00:1a.0: System wakeup disabled by ACPI
  211. [ 0.135594] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
  212. [ 0.135615] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
  213. [ 0.135663] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  214. [ 0.135690] pci 0000:00:1b.0: System wakeup disabled by ACPI
  215. [ 0.135715] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
  216. [ 0.135768] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  217. [ 0.135815] pci 0000:00:1c.0: System wakeup disabled by ACPI
  218. [ 0.135840] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
  219. [ 0.135893] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  220. [ 0.135938] pci 0000:00:1c.2: System wakeup disabled by ACPI
  221. [ 0.135968] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
  222. [ 0.135991] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
  223. [ 0.136053] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  224. [ 0.136086] pci 0000:00:1d.0: System wakeup disabled by ACPI
  225. [ 0.136115] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
  226. [ 0.136245] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
  227. [ 0.136262] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
  228. [ 0.136268] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
  229. [ 0.136273] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
  230. [ 0.136279] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
  231. [ 0.136285] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
  232. [ 0.136291] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
  233. [ 0.136313] pci 0000:00:1f.2: PME# supported from D3hot
  234. [ 0.136357] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
  235. [ 0.136370] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
  236. [ 0.136387] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
  237. [ 0.136463] pci 0000:00:01.0: PCI bridge to [bus 01]
  238. [ 0.136509] acpiphp: Slot [1] registered
  239. [ 0.136512] pci 0000:00:1c.0: PCI bridge to [bus 02]
  240. [ 0.136569] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
  241. [ 0.136604] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
  242. [ 0.136630] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
  243. [ 0.136646] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
  244. [ 0.136711] pci 0000:03:00.0: supports D1 D2
  245. [ 0.136712] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  246. [ 0.136747] pci 0000:03:00.0: System wakeup disabled by ACPI
  247. [ 0.141615] pci 0000:00:1c.2: PCI bridge to [bus 03]
  248. [ 0.141618] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
  249. [ 0.141621] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
  250. [ 0.141625] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
  251. [ 0.142063] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  252. [ 0.142095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  253. [ 0.142125] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  254. [ 0.142155] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
  255. [ 0.142184] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  256. [ 0.142214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  257. [ 0.142243] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
  258. [ 0.142272] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
  259. [ 0.142485] ACPI: Enabled 5 GPEs in block 00 to 3F
  260. [ 0.142565] vgaarb: setting as boot device: PCI:0000:00:02.0
  261. [ 0.142567] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  262. [ 0.142568] vgaarb: loaded
  263. [ 0.142569] vgaarb: bridge control possible 0000:00:02.0
  264. [ 0.142718] SCSI subsystem initialized
  265. [ 0.142738] libata version 3.00 loaded.
  266. [ 0.142753] ACPI: bus type USB registered
  267. [ 0.142763] usbcore: registered new interface driver usbfs
  268. [ 0.142768] usbcore: registered new interface driver hub
  269. [ 0.142777] usbcore: registered new device driver usb
  270. [ 0.142859] PCI: Using ACPI for IRQ routing
  271. [ 0.144052] PCI: pci_cache_line_size set to 64 bytes
  272. [ 0.144079] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
  273. [ 0.144080] e820: reserve RAM buffer [mem 0xc5ad4000-0xc7ffffff]
  274. [ 0.144081] e820: reserve RAM buffer [mem 0xc5f28000-0xc7ffffff]
  275. [ 0.144082] e820: reserve RAM buffer [mem 0xd84f7000-0xdbffffff]
  276. [ 0.144083] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
  277. [ 0.144084] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
  278. [ 0.144159] NetLabel: Initializing
  279. [ 0.144159] NetLabel: domain hash size = 128
  280. [ 0.144160] NetLabel: protocols = UNLABELED CIPSOv4
  281. [ 0.144168] NetLabel: unlabeled traffic allowed by default
  282. [ 0.144210] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  283. [ 0.144213] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  284. [ 0.146224] amd_nb: Cannot enumerate AMD northbridges
  285. [ 0.146233] clocksource: Switched to clocksource hpet
  286. [ 0.150210] AppArmor: AppArmor Filesystem Enabled
  287. [ 0.150259] pnp: PnP ACPI init
  288. [ 0.150313] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  289. [ 0.150315] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  290. [ 0.150421] system 00:01: [io 0x0680-0x069f] has been reserved
  291. [ 0.150422] system 00:01: [io 0xffff] has been reserved
  292. [ 0.150423] system 00:01: [io 0xffff] has been reserved
  293. [ 0.150424] system 00:01: [io 0xffff] has been reserved
  294. [ 0.150426] system 00:01: [io 0x1c00-0x1cfe] has been reserved
  295. [ 0.150427] system 00:01: [io 0x1d00-0x1dfe] has been reserved
  296. [ 0.150428] system 00:01: [io 0x1e00-0x1efe] has been reserved
  297. [ 0.150429] system 00:01: [io 0x1f00-0x1ffe] has been reserved
  298. [ 0.150430] system 00:01: [io 0x1800-0x18fe] could not be reserved
  299. [ 0.150431] system 00:01: [io 0x164e-0x164f] has been reserved
  300. [ 0.150433] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  301. [ 0.150449] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  302. [ 0.150477] system 00:03: [io 0x1854-0x1857] has been reserved
  303. [ 0.150479] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  304. [ 0.150543] system 00:04: [io 0x0a00-0x0a1f] has been reserved
  305. [ 0.150545] system 00:04: [io 0x0290-0x029f] has been reserved
  306. [ 0.150546] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  307. [ 0.150589] system 00:05: [io 0x04d0-0x04d1] has been reserved
  308. [ 0.150591] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  309. [ 0.150851] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
  310. [ 0.150852] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
  311. [ 0.150853] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
  312. [ 0.150854] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
  313. [ 0.150856] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
  314. [ 0.150857] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
  315. [ 0.150858] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
  316. [ 0.150859] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
  317. [ 0.150860] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
  318. [ 0.150861] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
  319. [ 0.150862] system 00:06: [mem 0xf7fee000-0xf7feefff] has been reserved
  320. [ 0.150863] system 00:06: [mem 0xf7fd0000-0xf7fdffff] has been reserved
  321. [ 0.150865] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  322. [ 0.151002] pnp: PnP ACPI: found 7 devices
  323. [ 0.156715] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  324. [ 0.156728] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
  325. [ 0.156730] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
  326. [ 0.156731] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
  327. [ 0.156739] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
  328. [ 0.156740] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
  329. [ 0.156741] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  330. [ 0.156742] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  331. [ 0.156743] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
  332. [ 0.156745] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
  333. [ 0.156748] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
  334. [ 0.156752] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
  335. [ 0.156754] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
  336. [ 0.156756] pci 0000:00:01.0: PCI bridge to [bus 01]
  337. [ 0.156760] pci 0000:00:1c.0: PCI bridge to [bus 02]
  338. [ 0.156762] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
  339. [ 0.156766] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
  340. [ 0.156768] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
  341. [ 0.156772] pci 0000:00:1c.2: PCI bridge to [bus 03]
  342. [ 0.156774] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
  343. [ 0.156778] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
  344. [ 0.156780] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
  345. [ 0.156785] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  346. [ 0.156786] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  347. [ 0.156787] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  348. [ 0.156788] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
  349. [ 0.156789] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
  350. [ 0.156790] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
  351. [ 0.156791] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
  352. [ 0.156792] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
  353. [ 0.156793] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
  354. [ 0.156794] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
  355. [ 0.156795] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
  356. [ 0.156796] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
  357. [ 0.156797] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
  358. [ 0.156798] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
  359. [ 0.156799] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
  360. [ 0.156800] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
  361. [ 0.156820] NET: Registered protocol family 2
  362. [ 0.156920] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  363. [ 0.157000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  364. [ 0.157103] TCP: Hash tables configured (established 65536 bind 65536)
  365. [ 0.157121] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  366. [ 0.157139] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  367. [ 0.157180] NET: Registered protocol family 1
  368. [ 0.157190] pci 0000:00:02.0: Video device with shadowed ROM
  369. [ 0.194298] PCI: CLS 64 bytes, default 64
  370. [ 0.194331] Trying to unpack rootfs image as initramfs...
  371. [ 0.593516] Freeing initrd memory: 37000K (ffff8800337ac000 - ffff880035bce000)
  372. [ 0.593523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  373. [ 0.593525] software IO TLB [mem 0xd44f7000-0xd84f7000] (64MB) mapped at [ffff8800d44f7000-ffff8800d84f6fff]
  374. [ 0.593578] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
  375. [ 0.593580] hw unit of domain pp0-core 2^-14 Joules
  376. [ 0.593580] hw unit of domain package 2^-14 Joules
  377. [ 0.593581] hw unit of domain dram 2^-14 Joules
  378. [ 0.593581] hw unit of domain pp1-gpu 2^-14 Joules
  379. [ 0.593696] Scanning for low memory corruption every 60 seconds
  380. [ 0.593913] futex hash table entries: 1024 (order: 4, 65536 bytes)
  381. [ 0.593935] audit: initializing netlink subsys (disabled)
  382. [ 0.593945] audit: type=2000 audit(1483687058.592:1): initialized
  383. [ 0.594274] Initialise system trusted keyring
  384. [ 0.594342] HugeTLB registered 1 GB page size, pre-allocated 0 pages
  385. [ 0.594343] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  386. [ 0.595254] zbud: loaded
  387. [ 0.595387] VFS: Disk quotas dquot_6.6.0
  388. [ 0.595408] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  389. [ 0.595570] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  390. [ 0.595716] fuse init (API version 7.23)
  391. [ 0.595795] Key type big_key registered
  392. [ 0.595807] Allocating IMA MOK and blacklist keyrings.
  393. [ 0.596075] Key type asymmetric registered
  394. [ 0.596077] Asymmetric key parser 'x509' registered
  395. [ 0.596099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  396. [ 0.596123] io scheduler noop registered
  397. [ 0.596125] io scheduler deadline registered (default)
  398. [ 0.596143] io scheduler cfq registered
  399. [ 0.596454] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  400. [ 0.596459] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  401. [ 0.596476] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
  402. [ 0.596476] vesafb: scrolling: redraw
  403. [ 0.596478] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  404. [ 0.596485] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 6912k, total 6912k
  405. [ 0.596546] Console: switching to colour frame buffer device 210x65
  406. [ 0.596559] fb0: VESA VGA frame buffer device
  407. [ 0.596568] intel_idle: MWAIT substates: 0x42120
  408. [ 0.596569] intel_idle: v0.4.1 model 0x3C
  409. [ 0.596570] intel_idle: lapic_timer_reliable_states 0xffffffff
  410. [ 0.596723] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  411. [ 0.596725] ACPI: Power Button [PWRB]
  412. [ 0.596749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  413. [ 0.596750] ACPI: Power Button [PWRF]
  414. [ 0.597189] thermal LNXTHERM:00: registered as thermal_zone0
  415. [ 0.597190] ACPI: Thermal Zone [TZ00] (28 C)
  416. [ 0.597322] thermal LNXTHERM:01: registered as thermal_zone1
  417. [ 0.597323] ACPI: Thermal Zone [TZ01] (30 C)
  418. [ 0.597353] GHES: HEST is not enabled!
  419. [ 0.597420] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  420. [ 0.598593] Linux agpgart interface v0.103
  421. [ 0.600486] brd: module loaded
  422. [ 0.601265] loop: module loaded
  423. [ 0.601408] libphy: Fixed MDIO Bus: probed
  424. [ 0.601410] tun: Universal TUN/TAP device driver, 1.6
  425. [ 0.601411] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  426. [ 0.601435] PPP generic driver version 2.4.2
  427. [ 0.601472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  428. [ 0.601476] ehci-pci: EHCI PCI platform driver
  429. [ 0.601537] ehci-pci 0000:00:1a.0: EHCI Host Controller
  430. [ 0.601541] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  431. [ 0.601549] ehci-pci 0000:00:1a.0: debug port 2
  432. [ 0.605451] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  433. [ 0.605498] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7d18000
  434. [ 0.614236] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  435. [ 0.614267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  436. [ 0.614268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  437. [ 0.614269] usb usb1: Product: EHCI Host Controller
  438. [ 0.614270] usb usb1: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
  439. [ 0.614271] usb usb1: SerialNumber: 0000:00:1a.0
  440. [ 0.614358] hub 1-0:1.0: USB hub found
  441. [ 0.614361] hub 1-0:1.0: 2 ports detected
  442. [ 0.614490] ehci-pci 0000:00:1d.0: EHCI Host Controller
  443. [ 0.614494] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  444. [ 0.614502] ehci-pci 0000:00:1d.0: debug port 2
  445. [ 0.618390] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  446. [ 0.618396] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
  447. [ 0.630236] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  448. [ 0.630254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  449. [ 0.630255] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  450. [ 0.630256] usb usb2: Product: EHCI Host Controller
  451. [ 0.630257] usb usb2: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
  452. [ 0.630258] usb usb2: SerialNumber: 0000:00:1d.0
  453. [ 0.630337] hub 2-0:1.0: USB hub found
  454. [ 0.630339] hub 2-0:1.0: 2 ports detected
  455. [ 0.630413] ehci-platform: EHCI generic platform driver
  456. [ 0.630420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  457. [ 0.630424] ohci-pci: OHCI PCI platform driver
  458. [ 0.630430] ohci-platform: OHCI generic platform driver
  459. [ 0.630436] uhci_hcd: USB Universal Host Controller Interface driver
  460. [ 0.630502] xhci_hcd 0000:00:14.0: xHCI Host Controller
  461. [ 0.630505] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  462. [ 0.631567] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
  463. [ 0.631571] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  464. [ 0.631623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  465. [ 0.631624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  466. [ 0.631624] usb usb3: Product: xHCI Host Controller
  467. [ 0.631625] usb usb3: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
  468. [ 0.631626] usb usb3: SerialNumber: 0000:00:14.0
  469. [ 0.631702] hub 3-0:1.0: USB hub found
  470. [ 0.631710] hub 3-0:1.0: 10 ports detected
  471. [ 0.633199] xhci_hcd 0000:00:14.0: xHCI Host Controller
  472. [ 0.633201] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  473. [ 0.633218] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  474. [ 0.633219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  475. [ 0.633219] usb usb4: Product: xHCI Host Controller
  476. [ 0.633220] usb usb4: Manufacturer: Linux 4.4.0-47-generic xhci-hcd
  477. [ 0.633221] usb usb4: SerialNumber: 0000:00:14.0
  478. [ 0.633297] hub 4-0:1.0: USB hub found
  479. [ 0.633301] hub 4-0:1.0: 2 ports detected
  480. [ 0.633572] i8042: PNP: No PS/2 controller found. Probing ports directly.
  481. [ 0.635994] serio: i8042 KBD port at 0x60,0x64 irq 1
  482. [ 0.635997] serio: i8042 AUX port at 0x60,0x64 irq 12
  483. [ 0.636221] mousedev: PS/2 mouse device common for all mice
  484. [ 0.636359] rtc_cmos 00:02: RTC can wake from S4
  485. [ 0.636472] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  486. [ 0.636493] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  487. [ 0.636499] i2c /dev entries driver
  488. [ 0.636528] device-mapper: uevent: version 1.0.3
  489. [ 0.636595] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  490. [ 0.636604] Intel P-state driver initializing.
  491. [ 0.636746] ledtrig-cpu: registered to indicate activity on CPUs
  492. [ 0.637606] NET: Registered protocol family 10
  493. [ 0.638037] NET: Registered protocol family 17
  494. [ 0.638067] Key type dns_resolver registered
  495. [ 0.638667] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x12
  496. [ 0.638708] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x12
  497. [ 0.638727] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x12
  498. [ 0.638745] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x12
  499. [ 0.638894] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  500. [ 0.639520] registered taskstats version 1
  501. [ 0.639569] Loading compiled-in X.509 certificates
  502. [ 0.641823] Loaded X.509 cert 'Build time autogenerated kernel key: f7bc719d96df7c6d6fed8f4b9fd5d4ff001383c8'
  503. [ 0.641868] zswap: loaded using pool lzo/zbud
  504. [ 0.643853] Key type trusted registered
  505. [ 0.646639] Key type encrypted registered
  506. [ 0.646644] AppArmor: AppArmor sha1 policy hashing enabled
  507. [ 0.646646] ima: No TPM chip found, activating TPM-bypass!
  508. [ 0.646658] evm: HMAC attrs: 0x1
  509. [ 0.647019] Magic number: 1:877:267
  510. [ 0.647115] rtc_cmos 00:02: setting system clock to 2017-01-06 07:17:38 UTC (1483687058)
  511. [ 0.647204] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  512. [ 0.647204] EDD information not available.
  513. [ 0.647252] PM: Hibernation image not present or could not be loaded.
  514. [ 0.648112] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
  515. [ 0.648113] Write protecting the kernel read-only data: 14336k
  516. [ 0.648426] Freeing unused kernel memory: 1804K (ffff88000183d000 - ffff880001a00000)
  517. [ 0.648682] Freeing unused kernel memory: 144K (ffff880001ddc000 - ffff880001e00000)
  518. [ 0.655642] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  519. [ 0.655693] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  520. [ 0.655702] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  521. [ 0.655712] random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  522. [ 0.655944] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  523. [ 0.655973] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  524. [ 0.656121] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  525. [ 0.656152] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  526. [ 0.656180] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  527. [ 0.656208] random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
  528. [ 0.672183] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
  529. [ 0.677276] wmi: Mapper loaded
  530. [ 0.680803] [drm] Initialized drm 1.1.0 20060810
  531. [ 0.681663] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  532. [ 0.681669] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
  533. [ 0.684650] ahci 0000:00:1f.2: version 3.0
  534. [ 0.684773] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
  535. [ 0.684775] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
  536. [ 0.687148] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000e8a000, 40:16:7e:64:24:a7, XID 0c000800 IRQ 27
  537. [ 0.687150] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  538. [ 0.700114] r8169 0000:03:00.0 enp3s0: renamed from eth0
  539. [ 0.706735] scsi host0: ahci
  540. [ 0.706829] scsi host1: ahci
  541. [ 0.706937] scsi host2: ahci
  542. [ 0.707023] scsi host3: ahci
  543. [ 0.707078] scsi host4: ahci
  544. [ 0.707133] scsi host5: ahci
  545. [ 0.707158] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 26
  546. [ 0.707160] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 26
  547. [ 0.707161] ata3: DUMMY
  548. [ 0.707162] ata4: DUMMY
  549. [ 0.707163] ata5: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16300 irq 26
  550. [ 0.707165] ata6: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16380 irq 26
  551. [ 0.707552] [drm] Memory usable by graphics device = 2048M
  552. [ 0.707555] checking generic (e0000000 6c0000) vs hw (e0000000 10000000)
  553. [ 0.707555] fb: switching to inteldrmfb from VESA VGA
  554. [ 0.707573] Console: switching to colour dummy device 80x25
  555. [ 0.707609] [drm] Replacing VGA console driver
  556. [ 0.713755] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  557. [ 0.713756] [drm] Driver supports precise vblank timestamp query.
  558. [ 0.714079] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  559. [ 0.815831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  560. [ 0.816161] acpi device:60: registered as cooling_device9
  561. [ 0.816207] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
  562. [ 0.816346] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
  563. [ 0.827329] fbcon: inteldrmfb (fb0) is primary device
  564. [ 0.827376] Console: switching to colour frame buffer device 210x65
  565. [ 0.827393] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  566. [ 0.930283] usb 1-1: new high-speed USB device number 2 using ehci-pci
  567. [ 0.942280] usb 2-1: new high-speed USB device number 2 using ehci-pci
  568. [ 0.942294] usb 3-3: new low-speed USB device number 2 using xhci_hcd
  569. [ 1.026283] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  570. [ 1.026871] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
  571. [ 1.026876] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802170d9e60), AE_NOT_FOUND (20150930/psparse-542)
  572. [ 1.027292] ata6.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
  573. [ 1.027295] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  574. [ 1.027927] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
  575. [ 1.027932] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8802170d9e60), AE_NOT_FOUND (20150930/psparse-542)
  576. [ 1.028313] ata6.00: configured for UDMA/133
  577. [ 1.030281] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  578. [ 1.030298] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  579. [ 1.030313] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  580. [ 1.030983] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
  581. [ 1.030987] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802170d9de8), AE_NOT_FOUND (20150930/psparse-542)
  582. [ 1.031070] ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
  583. [ 1.031072] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  584. [ 1.031374] ata5.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
  585. [ 1.031375] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  586. [ 1.031461] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM01, max UDMA/133
  587. [ 1.031808] ata1.00: configured for UDMA/133
  588. [ 1.031869] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
  589. [ 1.031872] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8802170d9de8), AE_NOT_FOUND (20150930/psparse-542)
  590. [ 1.031953] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
  591. [ 1.032122] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  592. [ 1.032123] sd 0:0:0:0: [sda] 4096-byte physical blocks
  593. [ 1.032154] sd 0:0:0:0: Attached scsi generic sg0 type 0
  594. [ 1.032203] sd 0:0:0:0: [sda] Write Protect is off
  595. [ 1.032205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  596. [ 1.032225] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  597. [ 1.032230] ata5.00: configured for UDMA/133
  598. [ 1.033004] ata2.00: configured for UDMA/133
  599. [ 1.035121] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LM01 PQ: 0 ANSI: 5
  600. [ 1.053173] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  601. [ 1.053176] cdrom: Uniform CD-ROM driver Revision: 3.20
  602. [ 1.053316] sr 1:0:0:0: Attached scsi CD-ROM sr0
  603. [ 1.053367] sr 1:0:0:0: Attached scsi generic sg1 type 5
  604. [ 1.053544] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
  605. [ 1.053698] sd 4:0:0:0: Attached scsi generic sg2 type 0
  606. [ 1.053699] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  607. [ 1.053700] sd 4:0:0:0: [sdb] 4096-byte physical blocks
  608. [ 1.053758] sd 4:0:0:0: [sdb] Write Protect is off
  609. [ 1.053759] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  610. [ 1.053779] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  611. [ 1.053805] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
  612. [ 1.053898] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  613. [ 1.053899] sd 5:0:0:0: [sdc] 4096-byte physical blocks
  614. [ 1.053912] sd 5:0:0:0: Attached scsi generic sg3 type 0
  615. [ 1.053919] sd 5:0:0:0: [sdc] Write Protect is off
  616. [ 1.053921] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  617. [ 1.053929] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  618. [ 1.066588] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
  619. [ 1.066590] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  620. [ 1.066813] hub 1-1:1.0: USB hub found
  621. [ 1.066913] hub 1-1:1.0: 4 ports detected
  622. [ 1.067264] sda: sda1 sda2
  623. [ 1.067611] sd 0:0:0:0: [sda] Attached SCSI disk
  624. [ 1.075663] sdc: sdc1
  625. [ 1.075980] sd 5:0:0:0: [sdc] Attached SCSI disk
  626. [ 1.078644] usb 3-3: New USB device found, idVendor=045e, idProduct=0040
  627. [ 1.078646] usb 3-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  628. [ 1.078647] usb 3-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
  629. [ 1.078648] usb 3-3: Manufacturer: Microsoft
  630. [ 1.078732] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  631. [ 1.081618] hidraw: raw HID events driver (C) Jiri Kosina
  632. [ 1.082531] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
  633. [ 1.082533] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  634. [ 1.082707] hub 2-1:1.0: USB hub found
  635. [ 1.082782] hub 2-1:1.0: 6 ports detected
  636. [ 1.084359] usbcore: registered new interface driver usbhid
  637. [ 1.084361] usbhid: USB HID core driver
  638. [ 1.085318] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:0040.0001/input/input6
  639. [ 1.085404] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-3/input0
  640. [ 1.092926] sdb: sdb1 sdb2 sdb3 < sdb5 >
  641. [ 1.093346] sd 4:0:0:0: [sdb] Attached SCSI disk
  642. [ 1.246273] usb 3-4: new high-speed USB device number 3 using xhci_hcd
  643. [ 1.446829] usb 3-4: New USB device found, idVendor=0cf3, idProduct=9271
  644. [ 1.446832] usb 3-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
  645. [ 1.446833] usb 3-4: Product: USB2.0 WLAN
  646. [ 1.446834] usb 3-4: Manufacturer: ATHEROS
  647. [ 1.446835] usb 3-4: SerialNumber: 12345
  648. [ 1.590227] tsc: Refined TSC clocksource calibration: 3192.607 MHz
  649. [ 1.590230] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0501eb3d1, max_idle_ns: 440795254769 ns
  650. [ 1.614261] usb 3-5: new low-speed USB device number 4 using xhci_hcd
  651. [ 1.787640] random: nonblocking pool is initialized
  652. [ 1.791498] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
  653. [ 1.816296] usb 3-5: New USB device found, idVendor=04d9, idProduct=3015
  654. [ 1.816299] usb 3-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  655. [ 1.816300] usb 3-5: Product: USB Keyboard
  656. [ 1.816392] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  657. [ 1.816395] usb 3-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  658. [ 1.826771] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:04D9:3015.0002/input/input7
  659. [ 1.882456] hid-generic 0003:04D9:3015.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-5/input0
  660. [ 1.904532] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:04D9:3015.0003/input/input8
  661. [ 1.958450] hid-generic 0003:04D9:3015.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-5/input1
  662. [ 2.070256] usb 3-6: new low-speed USB device number 5 using xhci_hcd
  663. [ 2.267120] usb 3-6: New USB device found, idVendor=1a7c, idProduct=0191
  664. [ 2.267133] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  665. [ 2.267134] usb 3-6: Product: Evoluent VerticalMouse 4
  666. [ 2.267135] usb 3-6: Manufacturer: HOLTEK
  667. [ 2.267259] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  668. [ 2.274852] input: HOLTEK Evoluent VerticalMouse 4 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1A7C:0191.0004/input/input9
  669. [ 2.275114] hid-generic 0003:1A7C:0191.0004: input,hidraw3: USB HID v1.10 Mouse [HOLTEK Evoluent VerticalMouse 4] on usb-0000:00:14.0-6/input0
  670. [ 2.590437] clocksource: Switched to clocksource tsc
  671. [ 2.649741] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  672. [ 2.649828] systemd[1]: Detected architecture x86-64.
  673. [ 2.658869] systemd[1]: Set hostname to <happiness>.
  674. [ 3.915942] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  675. [ 3.915980] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  676. [ 3.916007] systemd[1]: Listening on Journal Socket.
  677. [ 3.916054] systemd[1]: Listening on Journal Audit Socket.
  678. [ 3.916075] systemd[1]: Listening on udev Control Socket.
  679. [ 3.916081] systemd[1]: Reached target Encrypted Volumes.
  680. [ 3.916087] systemd[1]: Reached target Remote File Systems (Pre).
  681. [ 3.916104] systemd[1]: Listening on Journal Socket (/dev/log).
  682. [ 3.916110] systemd[1]: Reached target Remote File Systems.
  683. [ 3.916122] systemd[1]: Listening on udev Kernel Socket.
  684. [ 3.916127] systemd[1]: Reached target User and Group Name Lookups.
  685. [ 3.916182] systemd[1]: Created slice User and Session Slice.
  686. [ 3.916218] systemd[1]: Created slice System Slice.
  687. [ 3.926416] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  688. [ 3.926713] systemd[1]: Starting Set console keymap...
  689. [ 3.926962] systemd[1]: Starting Uncomplicated firewall...
  690. [ 3.990326] systemd[1]: Starting Load Kernel Modules...
  691. [ 3.990573] systemd[1]: Starting Nameserver information manager...
  692. [ 3.990630] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  693. [ 3.990862] systemd[1]: Started Read required files in advance.
  694. [ 3.991725] systemd[1]: Mounting Huge Pages File System...
  695. [ 3.991747] systemd[1]: Reached target Slices.
  696. [ 4.001033] systemd[1]: Mounting Debug File System...
  697. [ 4.001064] systemd[1]: Listening on fsck to fsckd communication Socket.
  698. [ 4.001109] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  699. [ 4.001128] systemd[1]: Listening on Syslog Socket.
  700. [ 4.001408] systemd[1]: Starting Journal Service...
  701. [ 4.001651] systemd[1]: Mounting POSIX Message Queue File System...
  702. [ 4.002452] systemd[1]: Started Create list of required static device nodes for the current kernel.
  703. [ 4.002787] systemd[1]: Starting Create Static Device Nodes in /dev...
  704. [ 4.011879] systemd[1]: Started Uncomplicated firewall.
  705. [ 4.298002] lp: driver loaded but no devices found
  706. [ 4.305259] ppdev: user-space parallel port driver
  707. [ 4.327259] systemd[1]: Started Load Kernel Modules.
  708. [ 4.342275] systemd[1]: Starting Apply Kernel Variables...
  709. [ 4.342526] systemd[1]: Mounting FUSE Control File System...
  710. [ 4.400922] systemd[1]: Started Journal Service.
  711. [ 10.047964] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
  712. [ 10.092622] systemd-journald[319]: Received request to flush runtime journal from PID 1
  713. [ 10.326483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  714. [ 10.565680] asus_wmi: ASUS WMI generic driver loaded
  715. [ 10.571576] asus_wmi: Initialization: 0x0
  716. [ 10.571591] asus_wmi: BIOS WMI version: 0.9
  717. [ 10.571614] asus_wmi: SFUN value: 0x0
  718. [ 10.571806] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
  719. [ 10.571857] asus_wmi: Number of fans: 1
  720. [ 10.837699] Adding 7811068k swap on /dev/sdb1. Priority:-1 extents:1 across:7811068k FS
  721. [ 10.862480] AVX2 version of gcm_enc/dec engaged.
  722. [ 10.862482] AES CTR mode by8 optimization enabled
  723. [ 10.989613] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  724. [ 11.086991] kvm: disabled by bios
  725. [ 11.088588] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
  726. [ 11.088591] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  727. [ 11.088592] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  728. [ 11.088593] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  729. [ 11.088594] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
  730. [ 11.088594] snd_hda_codec_realtek hdaudioC0D0: inputs:
  731. [ 11.088596] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
  732. [ 11.088597] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
  733. [ 11.088598] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
  734. [ 11.100183] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  735. [ 11.100220] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  736. [ 11.100252] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
  737. [ 11.318662] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  738. [ 11.388154] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  739. [ 11.389434] intel_rapl: Found RAPL domain package
  740. [ 11.389436] intel_rapl: Found RAPL domain core
  741. [ 11.389438] intel_rapl: Found RAPL domain uncore
  742. [ 11.389439] intel_rapl: Found RAPL domain dram
  743. [ 11.682310] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
  744. [ 12.049273] usb 3-4: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
  745. [ 12.049294] usbcore: registered new interface driver ath9k_htc
  746. [ 12.072897] cfg80211: World regulatory domain updated:
  747. [ 12.072900] cfg80211: DFS Master region: unset
  748. [ 12.072900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  749. [ 12.072902] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  750. [ 12.072903] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  751. [ 12.072904] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  752. [ 12.072905] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  753. [ 12.072906] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  754. [ 12.072907] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  755. [ 12.072908] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  756. [ 12.072909] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  757. [ 12.437621] usb 3-4: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
  758. [ 12.462453] audit: type=1400 audit(1483687070.311:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=773 comm="apparmor_parser"
  759. [ 12.462458] audit: type=1400 audit(1483687070.311:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=773 comm="apparmor_parser"
  760. [ 12.464081] audit: type=1400 audit(1483687070.311:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=776 comm="apparmor_parser"
  761. [ 12.464095] audit: type=1400 audit(1483687070.311:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=776 comm="apparmor_parser"
  762. [ 12.464099] audit: type=1400 audit(1483687070.311:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=776 comm="apparmor_parser"
  763. [ 12.464691] audit: type=1400 audit(1483687070.311:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=777 comm="apparmor_parser"
  764. [ 12.465482] audit: type=1400 audit(1483687070.311:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=778 comm="apparmor_parser"
  765. [ 12.476857] audit: type=1400 audit(1483687070.323:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=779 comm="apparmor_parser"
  766. [ 12.476862] audit: type=1400 audit(1483687070.323:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=779 comm="apparmor_parser"
  767. [ 12.477132] audit: type=1400 audit(1483687070.323:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=775 comm="apparmor_parser"
  768. [ 12.689323] ath9k_htc 3-4:1.0: ath9k_htc: HTC initialized with 33 credits
  769. [ 12.953443] ath9k_htc 3-4:1.0: ath9k_htc: FW Version: 1.4
  770. [ 12.953445] ath9k_htc 3-4:1.0: FW RMW support: On
  771. [ 12.953447] ath: EEPROM regdomain: 0x809c
  772. [ 12.953447] ath: EEPROM indicates we should expect a country code
  773. [ 12.953448] ath: doing EEPROM country->regdmn map search
  774. [ 12.953449] ath: country maps to regdmn code: 0x52
  775. [ 12.953450] ath: Country alpha2 being used: CN
  776. [ 12.953450] ath: Regpair used: 0x52
  777. [ 13.036124] ieee80211 phy0: Atheros AR9271 Rev:1
  778. [ 13.037826] cfg80211: Regulatory domain changed to country: CN
  779. [ 13.037828] cfg80211: DFS Master region: FCC
  780. [ 13.037828] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  781. [ 13.037830] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  782. [ 13.037831] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  783. [ 13.037832] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  784. [ 13.037833] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  785. [ 13.037834] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
  786. [ 13.037835] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
  787. [ 13.037836] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
  788. [ 13.130656] ath9k_htc 3-4:1.0 wlxd85d4c93a47f: renamed from wlan0
  789. [ 13.361076] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
  790. [ 13.363164] vboxdrv: Found 4 processor cores
  791. [ 13.382328] vboxdrv: TSC mode is Invariant, tentative frequency 3192606717 Hz
  792. [ 13.382330] vboxdrv: Successfully loaded version 5.1.4 (interface 0x00260000)
  793. [ 14.120548] VBoxNetFlt: Successfully started.
  794. [ 14.199021] VBoxNetAdp: Successfully started.
  795. [ 14.224053] VBoxPciLinuxInit
  796. [ 14.651546] vboxpci: IOMMU not found (not registered)
  797. [ 15.824310] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  798. [ 16.007052] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  799. [ 16.009707] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  800. [ 16.076621] r8169 0000:03:00.0 enp3s0: link down
  801. [ 16.076667] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
  802. [ 16.604104] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  803. [ 153.968440] show_signal_msg: 39 callbacks suppressed
  804. [ 153.968444] baloo_file_extr[1820]: segfault at 4 ip 00007ff125351d78 sp 00007ffe5ee7fb18 error 4 in libexiv2.so.14.0.0[7ff12527c000+250000]
  805. [ 171.373841] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  806. [ 171.613424] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  807. [ 171.616042] wlxd85d4c93a47f: authenticated
  808. [ 171.616416] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 1/3)
  809. [ 171.621512] wlxd85d4c93a47f: RX AssocResp from f0:25:b7:51:20:d7 (capab=0x411 status=0 aid=1)
  810. [ 171.630027] wlxd85d4c93a47f: associated
  811. [ 171.630054] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c93a47f: link becomes ready
  812. [ 177.136681] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  813. [ 177.413836] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  814. [ 261.133122] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  815. [ 261.410365] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  816. [ 262.957443] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  817. [ 263.234745] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  818. [ 354.980802] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  819. [ 355.262294] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  820. [ 363.516793] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  821. [ 363.793913] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  822. [ 638.145496] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  823. [ 638.422695] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  824. [ 659.094669] systemd[1]: snapd.refresh.timer: Adding 2h 49min 30.907877s random time.
  825. [ 659.094675] systemd[1]: snapd.refresh.timer: Adding 5h 13min 14.218238s random time.
  826. [ 661.885463] systemd[1]: snapd.refresh.timer: Adding 1h 47min 53.958670s random time.
  827. [ 661.885469] systemd[1]: snapd.refresh.timer: Adding 25min 46.879657s random time.
  828. [ 667.249996] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  829. [ 667.527150] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  830. [ 691.806160] systemd[1]: snapd.refresh.timer: Adding 24min 28.870654s random time.
  831. [ 691.806166] systemd[1]: snapd.refresh.timer: Adding 5h 49min 43.270119s random time.
  832. [ 693.946586] systemd[1]: snapd.refresh.timer: Adding 1h 20min 34.995446s random time.
  833. [ 693.946593] systemd[1]: snapd.refresh.timer: Adding 1h 41min 53.079522s random time.
  834. [ 694.004049] systemd[1]: snapd.refresh.timer: Adding 3h 38.242440s random time.
  835. [ 694.004055] systemd[1]: snapd.refresh.timer: Adding 26min 5.431079s random time.
  836. [ 745.240404] systemd[1]: snapd.refresh.timer: Adding 3h 19min 15.123558s random time.
  837. [ 745.240410] systemd[1]: snapd.refresh.timer: Adding 1h 36min 16.403526s random time.
  838. [ 831.404884] systemd[1]: snapd.refresh.timer: Adding 36min 41.051797s random time.
  839. [ 831.404890] systemd[1]: snapd.refresh.timer: Adding 27min 48.083923s random time.
  840. [ 831.464200] systemd[1]: snapd.refresh.timer: Adding 2h 14min 40.951111s random time.
  841. [ 831.464206] systemd[1]: snapd.refresh.timer: Adding 4h 50min 40.953518s random time.
  842. [ 831.582494] systemd[1]: snapd.refresh.timer: Adding 29min 24.590746s random time.
  843. [ 831.582500] systemd[1]: snapd.refresh.timer: Adding 4h 6min 23.146832s random time.
  844. [ 835.712799] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  845. [ 835.989941] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  846. [ 848.827072] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  847. [ 848.851024] JFS: nTxBlock = 8192, nTxLock = 65536
  848. [ 848.882544] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  849. [ 848.900843] QNX4 filesystem 0.2.3 registered.
  850. [ 849.000866] raid6: sse2x1 gen() 10648 MB/s
  851. [ 849.068850] raid6: sse2x1 xor() 8290 MB/s
  852. [ 849.136854] raid6: sse2x2 gen() 13672 MB/s
  853. [ 849.204855] raid6: sse2x2 xor() 9057 MB/s
  854. [ 849.272856] raid6: sse2x4 gen() 15778 MB/s
  855. [ 849.340857] raid6: sse2x4 xor() 10985 MB/s
  856. [ 849.408859] raid6: avx2x1 gen() 20833 MB/s
  857. [ 849.476858] raid6: avx2x2 gen() 23940 MB/s
  858. [ 849.544859] raid6: avx2x4 gen() 28096 MB/s
  859. [ 849.544860] raid6: using algorithm avx2x4 gen() 28096 MB/s
  860. [ 849.544861] raid6: using avx2x2 recovery algorithm
  861. [ 849.559514] xor: automatically using best checksumming function:
  862. [ 849.596876] avx : 32842.000 MB/sec
  863. [ 849.614090] Btrfs loaded
  864. [ 889.581787] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  865. [ 889.859017] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  866. [ 915.046153] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  867. [ 915.323482] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  868. [ 917.134082] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  869. [ 917.411321] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  870. [ 971.006920] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  871. [ 971.284145] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  872. [ 1604.421126] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  873. [ 1604.698393] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  874. [ 1830.797775] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  875. [ 1831.075089] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  876. [ 2658.354749] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  877. [ 2658.632006] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  878. [ 3174.003427] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  879. [ 3174.280711] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  880. [ 4616.574151] Web Content[23998]: segfault at 0 ip 0000555b1f337cf8 sp 00007ffe25fbb8d0 error 6 in plugin-container[555b1f32f000+3e000]
  881. [ 4765.995426] Web Content[24076]: segfault at 0 ip 00005631fa9c0cf8 sp 00007ffdf8b6f200 error 6 in plugin-container[5631fa9b8000+3e000]
  882. [ 5015.679343] usb 3-6: USB disconnect, device number 5
  883. [ 5022.928449] usb 3-6: new full-speed USB device number 6 using xhci_hcd
  884. [ 5023.040461] usb 3-6: device descriptor read/64, error -71
  885. [ 5023.256477] usb 3-6: device descriptor read/64, error -71
  886. [ 5023.472520] usb 3-6: new full-speed USB device number 7 using xhci_hcd
  887. [ 5023.584528] usb 3-6: device descriptor read/64, error -71
  888. [ 5023.800467] usb 3-6: device descriptor read/64, error -71
  889. [ 5024.016528] usb 3-6: new full-speed USB device number 8 using xhci_hcd
  890. [ 5024.016693] usb 3-6: Device not responding to setup address.
  891. [ 5024.220577] usb 3-6: Device not responding to setup address.
  892. [ 5024.424484] usb 3-6: device not accepting address 8, error -71
  893. [ 5024.536473] usb 3-6: new full-speed USB device number 9 using xhci_hcd
  894. [ 5024.536585] usb 3-6: Device not responding to setup address.
  895. [ 5024.740596] usb 3-6: Device not responding to setup address.
  896. [ 5024.944530] usb 3-6: device not accepting address 9, error -71
  897. [ 5024.944563] usb usb3-port6: unable to enumerate USB device
  898. [ 5106.816648] Web Content[24289]: segfault at 0 ip 0000560312610cf8 sp 00007ffc1ec979e0 error 6 in plugin-container[560312608000+3e000]
  899. [ 5367.323495] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  900. [ 5367.600708] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  901. [ 5818.274705] Web Content[26070]: segfault at 0 ip 000055ef2396fcf8 sp 00007ffeec4da600 error 6 in plugin-container[55ef23967000+3e000]
  902. [ 5825.921749] Web Content[26247]: segfault at 0 ip 0000562e5989dcf8 sp 00007fffde386a40 error 6 in plugin-container[562e59895000+3e000]
  903. [ 6940.644395] Web Content[26459]: segfault at 0 ip 000055f05a799cf8 sp 00007ffd028f6950 error 6 in plugin-container[55f05a791000+3e000]
  904. [ 6941.122810] Web Content[26486]: segfault at 0 ip 00005645173eacf8 sp 00007ffde2236400 error 6 in plugin-container[5645173e2000+3e000]
  905. [ 6941.614072] Web Content[26514]: segfault at 0 ip 000055b09e766cf8 sp 00007ffd6a92fe90 error 6 in plugin-container[55b09e75e000+3e000]
  906. [ 6972.995246] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  907. [ 6973.272469] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  908. [ 7755.478991] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  909. [ 7755.756108] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  910. [ 7806.439170] usb 3-3: reset low-speed USB device number 2 using xhci_hcd
  911. [ 7806.716365] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  912. [ 8675.292201] cfg80211: World regulatory domain updated:
  913. [ 8675.292204] cfg80211: DFS Master region: unset
  914. [ 8675.292205] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  915. [ 8675.292206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  916. [ 8675.292207] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  917. [ 8675.292208] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  918. [ 8675.292209] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  919. [ 8675.292210] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  920. [ 8675.292211] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  921. [ 8675.292212] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  922. [ 8675.292213] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  923. [ 8676.530283] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  924. [ 8676.790237] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  925. [ 8676.795476] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 2/3)
  926. [ 8676.800748] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 3/3)
  927. [ 8676.806465] wlxd85d4c93a47f: authentication with f0:25:b7:51:20:d7 timed out
  928. [ 8690.258659] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  929. [23641.435193] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  930. [23641.661946] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  931. [23641.663603] wlxd85d4c93a47f: authenticated
  932. [23641.665356] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 1/3)
  933. [23641.668798] wlxd85d4c93a47f: RX AssocResp from f0:25:b7:51:20:d7 (capab=0x411 status=0 aid=1)
  934. [23641.677302] wlxd85d4c93a47f: associated
  935. [23641.677366] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c93a47f: link becomes ready
  936. [23807.487903] usb 3-3: USB disconnect, device number 2
  937. [23807.760547] usb 3-3: new low-speed USB device number 10 using xhci_hcd
  938. [23807.892931] usb 3-3: New USB device found, idVendor=045e, idProduct=0040
  939. [23807.892933] usb 3-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  940. [23807.892935] usb 3-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
  941. [23807.892936] usb 3-3: Manufacturer: Microsoft
  942. [23807.893022] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  943. [23807.895650] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:0040.0005/input/input14
  944. [23807.948681] hid-generic 0003:045E:0040.0005: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-3/input0
  945. [25219.503859] usb 3-3: USB disconnect, device number 10
  946. [25219.787243] usb 3-3: new low-speed USB device number 11 using xhci_hcd
  947. [25219.919590] usb 3-3: New USB device found, idVendor=045e, idProduct=0040
  948. [25219.919592] usb 3-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  949. [25219.919594] usb 3-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
  950. [25219.919595] usb 3-3: Manufacturer: Microsoft
  951. [25219.919702] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  952. [25219.921721] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:0040.0006/input/input15
  953. [25219.921856] hid-generic 0003:045E:0040.0006: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-3/input0
  954. [25221.754277] Web Content[29853]: segfault at 0 ip 000055b6b8019cf8 sp 00007ffc04dc5e50 error 6 in plugin-container[55b6b8011000+3e000]
  955. [25222.274329] Web Content[29918]: segfault at 0 ip 000055fbb0e61cf8 sp 00007ffd3f526050 error 6 in plugin-container[55fbb0e59000+3e000]
  956. [25222.723123] Web Content[29944]: segfault at 0 ip 000055a26723acf8 sp 00007ffc769a2d70 error 6 in plugin-container[55a267232000+3e000]
  957. [26794.200980] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
  958. [27718.251474] usb 3-3: USB disconnect, device number 11
  959. [27718.517265] usb 3-3: new low-speed USB device number 12 using xhci_hcd
  960. [27718.649468] usb 3-3: New USB device found, idVendor=045e, idProduct=0040
  961. [27718.649471] usb 3-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  962. [27718.649472] usb 3-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
  963. [27718.649473] usb 3-3: Manufacturer: Microsoft
  964. [27718.649564] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  965. [27718.651621] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:0040.0007/input/input16
  966. [27718.705490] hid-generic 0003:045E:0040.0007: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-3/input0
  967. [28960.548378] Web Content[30498]: segfault at 0 ip 0000558ca62a0cf8 sp 00007ffc14323e20 error 6 in plugin-container[558ca6298000+3e000]
  968. [28961.374089] Web Content[30526]: segfault at 0 ip 00005590f15b9cf8 sp 00007ffdf62ee160 error 6 in plugin-container[5590f15b1000+3e000]
  969. [29068.926031] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  970. [29069.203094] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  971. [29586.423278] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  972. [29586.700498] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  973. [29630.927280] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  974. [29631.204592] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  975. [30250.409154] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  976. [30250.686283] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  977. [30581.484446] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  978. [30581.761512] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  979. [30591.508346] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  980. [30591.785570] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  981. [31791.407905] wlxd85d4c93a47f: deauthenticated from f0:25:b7:51:20:d7 (Reason: 3=DEAUTH_LEAVING)
  982. [31791.636865] cfg80211: World regulatory domain updated:
  983. [31791.636867] cfg80211: DFS Master region: unset
  984. [31791.636868] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  985. [31791.636870] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  986. [31791.636871] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  987. [31791.636872] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  988. [31791.636873] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  989. [31791.636874] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  990. [31791.636875] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  991. [31791.636876] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  992. [31791.636877] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  993. [31792.904599] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  994. [31793.164809] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  995. [31793.170370] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 2/3)
  996. [31793.175859] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 3/3)
  997. [31793.181229] wlxd85d4c93a47f: authentication with f0:25:b7:51:20:d7 timed out
  998. [31807.259196] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  999. [31834.455832] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  1000. [31834.701160] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  1001. [31834.702815] wlxd85d4c93a47f: authenticated
  1002. [31834.704144] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 1/3)
  1003. [31834.707567] wlxd85d4c93a47f: RX AssocResp from f0:25:b7:51:20:d7 (capab=0x411 status=0 aid=1)
  1004. [31834.716005] wlxd85d4c93a47f: associated
  1005. [31834.716034] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c93a47f: link becomes ready
  1006. [32237.727362] cfg80211: World regulatory domain updated:
  1007. [32237.727368] cfg80211: DFS Master region: unset
  1008. [32237.727370] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  1009. [32237.727374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1010. [32237.727377] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1011. [32237.727379] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  1012. [32237.727382] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1013. [32237.727386] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  1014. [32237.727388] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  1015. [32237.727391] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  1016. [32237.727393] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  1017. [32238.994558] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  1018. [32239.254940] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  1019. [32239.265148] wlxd85d4c93a47f: authenticated
  1020. [32239.265948] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 1/3)
  1021. [32239.277041] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 2/3)
  1022. [32239.288161] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 3/3)
  1023. [32239.295157] wlxd85d4c93a47f: RX AssocResp from f0:25:b7:51:20:d7 (capab=0x411 status=0 aid=1)
  1024. [32239.303787] wlxd85d4c93a47f: associated
  1025. [32240.326454] cfg80211: World regulatory domain updated:
  1026. [32240.326456] cfg80211: DFS Master region: unset
  1027. [32240.326457] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  1028. [32240.326459] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1029. [32240.326460] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1030. [32240.326461] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  1031. [32240.326462] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1032. [32240.326463] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  1033. [32240.326464] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  1034. [32240.326465] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  1035. [32240.326466] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  1036. [32265.406131] IPv6: ADDRCONF(NETDEV_UP): wlxd85d4c93a47f: link is not ready
  1037. [34006.219372] wlxd85d4c93a47f: authenticate with f0:25:b7:51:20:d7
  1038. [34006.479739] wlxd85d4c93a47f: send auth to f0:25:b7:51:20:d7 (try 1/3)
  1039. [34006.481402] wlxd85d4c93a47f: authenticated
  1040. [34006.482968] wlxd85d4c93a47f: associate with f0:25:b7:51:20:d7 (try 1/3)
  1041. [34006.486381] wlxd85d4c93a47f: RX AssocResp from f0:25:b7:51:20:d7 (capab=0x411 status=0 aid=1)
  1042. [34006.494819] wlxd85d4c93a47f: associated
  1043. [34006.494864] IPv6: ADDRCONF(NETDEV_CHANGE): wlxd85d4c93a47f: link becomes ready
  1044. [34010.143134] usb 3-3: reset low-speed USB device number 12 using xhci_hcd
  1045. [34010.420370] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  1046. [37253.071741] usb 3-6: new full-speed USB device number 13 using xhci_hcd
  1047. [37253.183799] usb 3-6: device descriptor read/64, error -71
  1048. [37253.399804] usb 3-6: device descriptor read/64, error -71
  1049. [37253.615773] usb 3-6: new full-speed USB device number 14 using xhci_hcd
  1050. [37253.727801] usb 3-6: device descriptor read/64, error -71
  1051. [37253.943739] usb 3-6: device descriptor read/64, error -71
  1052. [37254.159669] usb 3-6: new full-speed USB device number 15 using xhci_hcd
  1053. [37254.159841] usb 3-6: Device not responding to setup address.
  1054. [37254.363858] usb 3-6: Device not responding to setup address.
  1055. [37254.567744] usb 3-6: device not accepting address 15, error -71
  1056. [37254.679654] usb 3-6: new full-speed USB device number 16 using xhci_hcd
  1057. [37254.679756] usb 3-6: Device not responding to setup address.
  1058. [37254.883917] usb 3-6: Device not responding to setup address.
  1059. [37255.087716] usb 3-6: device not accepting address 16, error -71
  1060. [37255.087749] usb usb3-port6: unable to enumerate USB device
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×