Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@briareos:~# smartctl -a /dev/sdc
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-17-amd64] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red Pro
- Device Model: WDC WD8001FFWX-68J1UN0
- Serial Number: R6GLXMKY
- LU WWN Device Id: 5 000cca 263c89a28
- Firmware Version: 83.H0A03
- User Capacity: 8 001 563 222 016 bytes [8,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sun Sep 18 17:59:28 2022 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: Incomplete response, ATA output registers missing
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1384) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 104
- 3 Spin_Up_Time 0x0007 142 142 024 Pre-fail Always - 462 (Average 463)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 56
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 15
- 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 36476
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
- 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1445
- 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1445
- 194 Temperature_Celsius 0x0002 240 240 000 Old_age Always - 25 (Min/Max 12/44)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 24
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 2
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 19 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 19 occurred at disk power-on lifetime: 36151 hours (1506 days + 7 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 d0 b8 00 aa 40 00 19d+10:55:56.537 READ FPDMA QUEUED
- 60 80 a8 b8 7c d4 40 00 19d+10:55:53.634 READ FPDMA QUEUED
- 60 08 a0 f8 00 aa 40 00 19d+10:55:53.634 READ FPDMA QUEUED
- 60 08 98 f0 00 aa 40 00 19d+10:55:53.634 READ FPDMA QUEUED
- 61 08 90 38 f3 a9 40 00 19d+10:55:53.634 WRITE FPDMA QUEUED
- Error 18 occurred at disk power-on lifetime: 36151 hours (1506 days + 7 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 38 f3 a9 40 00 19d+10:55:53.612 READ FPDMA QUEUED
- 60 08 f8 30 f4 a9 40 00 19d+10:55:50.867 READ FPDMA QUEUED
- 60 08 f0 28 f4 a9 40 00 19d+10:55:50.867 READ FPDMA QUEUED
- 60 08 e8 20 f4 a9 40 00 19d+10:55:50.867 READ FPDMA QUEUED
- 60 08 e0 18 f4 a9 40 00 19d+10:55:50.867 READ FPDMA QUEUED
- Error 17 occurred at disk power-on lifetime: 36151 hours (1506 days + 7 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 c0 00 fd a9 40 00 19d+10:55:49.304 READ FPDMA QUEUED
- 61 38 f0 a8 a7 f3 40 00 19d+10:55:46.081 WRITE FPDMA QUEUED
- 61 08 f8 a8 d1 78 40 00 19d+10:55:46.080 WRITE FPDMA QUEUED
- 61 08 f0 78 96 3b 40 00 19d+10:55:46.080 WRITE FPDMA QUEUED
- 60 08 e8 a0 1b 46 40 00 19d+10:55:46.080 READ FPDMA QUEUED
- Error 16 occurred at disk power-on lifetime: 36151 hours (1506 days + 7 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 18 00 f1 a9 40 00 19d+10:55:46.004 READ FPDMA QUEUED
- 60 00 08 00 69 aa 40 00 19d+10:55:43.250 READ FPDMA QUEUED
- 60 00 00 00 65 aa 40 00 19d+10:55:43.250 READ FPDMA QUEUED
- 60 00 30 00 61 aa 40 00 19d+10:55:43.000 READ FPDMA QUEUED
- 60 00 f8 00 5d aa 40 00 19d+10:55:42.999 READ FPDMA QUEUED
- Error 15 occurred at disk power-on lifetime: 36150 hours (1506 days + 6 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 30 50 98 40 00 19d+10:31:59.135 READ FPDMA QUEUED
- 61 08 f8 10 08 00 c0 00 19d+10:31:56.393 WRITE FPDMA QUEUED
- 60 08 f0 88 50 98 40 00 19d+10:31:56.393 READ FPDMA QUEUED
- 60 08 e8 30 66 88 40 00 19d+10:31:56.393 READ FPDMA QUEUED
- 60 00 e0 00 a5 98 40 00 19d+10:31:56.393 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@briareos:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement