API tools faq
paste
Guest User

Untitled

a guest
May 31st, 2021
69
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 196.15 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.06.01 11:26:22 =~=~=~=~=~=~=~=~=~=~=~=
  2. G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
  3. bl2_stage_init 0x01
  4. bl2_stage_init 0x81
  5. hw id: 0x0000 - pwm id 0x01
  6. bl2_stage_init 0xc1
  7. bl2_stage_init 0x02
  8.  
  9. L0:00000000
  10. L1:20000703
  11. L2:00008067
  12. L3:14000000
  13. B2:00402000
  14. B1:e0f83180
  15.  
  16. TE: 142139
  17.  
  18. BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
  19.  
  20. Board ID = 8
  21. Set A53 clk to 24M
  22. Set A73 clk to 24M
  23. Set clk81 to 24M
  24. A53 clk: 1200 MHz
  25. A73 clk: 1200 MHz
  26. CLK81: 166.6M
  27. smccc: 0002741e
  28. eMMC boot @ 0
  29. sw8 s
  30. board id: 8
  31. Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  32. Get wrong ddr fw magic! Error!!
  33. fw parse done
  34. PIEI prepare done
  35. 00000000
  36. emmc switch 1 ok
  37. ddr saved addr:00016000
  38. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  39. 00000000
  40. emmc switch 0 ok
  41. fastboot data verify
  42. result: 255
  43. Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
  44. LPDDR4 probe
  45.  
  46. LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
  47. ddr clk to 1608MHz
  48.  
  49. dmc_version 0001
  50. Check phy result
  51. INFO : ERROR : Training has failed!
  52. Check phy result
  53. INFO : ERROR : Training has failed!
  54. Check phy result
  55. INFO : End of initialization
  56. INFO : ERROR : Training has failed!
  57. 1D training failed
  58. Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
  59. LPDDR4 probe
  60. ddr clk to 1608MHz
  61.  
  62. dmc_version 0001
  63. Check phy result
  64. INFO : End of CA training
  65. INFO : End of initialization
  66. INFO : Training has run successfully!
  67. Check phy result
  68. INFO : End of initialization
  69. INFO : End of read enable training
  70. INFO : End of fine write leveling
  71. INFO : End of read dq deskew training
  72. INFO : End of MPR read delay center optimization
  73. INFO : End of Write leveling coarse delay
  74. INFO : End of read delay center optimization
  75. INFO : Training has run successfully!
  76. Check phy result
  77. INFO : End of initialization
  78. INFO : End of MPR read delay center optimization
  79. INFO : End of write delay center optimization
  80. INFO : End of read delay center optimization
  81. INFO : End of max read latency training
  82. INFO : Training has run successfully!
  83. 1D training succeed
  84. Check phy result
  85. INFO : End of initialization
  86. INFO : End of 2D read delay Voltage center optimization
  87. INFO : End of 2D read delay Voltage center optimization
  88. INFO : End of 2D write delay Voltage center optimization
  89. INFO : End of 2D write delay Voltage center optimization
  90. INFO : Training has run successfully!
  91.  
  92. soc_vref_reg_value 0x 00000027 00000028 00000026 00000027 00000027 00000027 00000027 00000027 00000028 00000024 00000027 00000028 00000027 00000029 00000025 00000027 00000025 00000027 00000026 00000026 00000025 00000027 00000026 00000026 00000028 00000025 00000025 00000026 00000025 00000025 00000027 00000027 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  93. dram_vref_reg_value 0x 00000013
  94. 2D training succeed
  95. auto size-- 65535DDR cs0 size: 2048MB
  96. DDR cs1 size: 0MB
  97. DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
  98. cs0 DataBus test pass
  99. cs0 AddrBus test pass
  100.  
  101. non-sec scramble use zero key
  102. ddr scramble enabled
  103.  
  104. 100bdlr_step_size ps== 420
  105. result report
  106. boot times 0Enable ddr reg access
  107. 00000000
  108. emmc switch 3 ok
  109. Authentication key not yet programmed
  110. get rpmb counter error 0x00000007
  111. 00000000
  112. emmc switch 0 ok
  113. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  114. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x0010ac00, part: 0
  115. 0.0;M3 CHK:0;cm4_sp_mode 0
  116.  
  117. [Image: g12b_v1.1.3396-c893a7153 2020-11-11 13:54:36 gongwei.chen@droid11-sz]
  118.  
  119. OPS=0x10
  120.  
  121. ring efuse init
  122.  
  123. chipver efuse init
  124.  
  125. 29 0b 10 00 01 1c 0d 00 00 0e 35 37 4d 4d 4e 50
  126.  
  127. [0.016080 Inits done]
  128.  
  129. secure task start!
  130. high task start!
  131. low task start!
  132. run into bl31
  133. NOTICE: BL31: v1.3(release):5c909a099
  134. NOTICE: BL31: Built : 17:18:21, Nov 20 2020
  135. NOTICE: BL31: G12A normal boot!
  136. NOTICE: BL31: BL33 decompress pass
  137. ERROR: Error initializing runtime service opteed_fast
  138.  
  139.  
  140. U-Boot 2015.01-g0ee066b06d-dirty (May 27 2021 - 16:17:37)
  141.  
  142. DRAM: 2 GiB
  143. Relocation Offset is: 76d38000
  144. mmu cfg end: 0x80000000
  145. mmu cfg end: 0x80000000
  146. spi_post_bind(spifc): req_seq = 0
  147. register usb cfg[0][1] = 0000000077e82640
  148. aml_i2c_init_port init regs for 0
  149. MCU version: 0x00 0x03
  150. MCU version is to low! Doesn't support froce boot from SD card.
  151. NAND: get_sys_clk_rate_mtd() 292, clock setting 200!
  152. bus cycle0: 6,timing: 7
  153. NAND device id: 0 9f ff ff ff ff
  154. No NAND device found!!!
  155. nand init failed: -6
  156. get_sys_clk_rate_mtd() 292, clock setting 200!
  157. bus cycle0: 6,timing: 7
  158. NAND device id: 0 9f ff ff ff ff
  159. No NAND device found!!!
  160. nand init failed: -6
  161. MMC: aml_priv->desc_buf = 0x0000000073d28a70
  162. aml_priv->desc_buf = 0x0000000073d2adb0
  163. SDIO Port B: 0, SDIO Port C: 1
  164. co-phase 0x3, tx-dly 0, clock 400000
  165. co-phase 0x3, tx-dly 0, clock 400000
  166. co-phase 0x3, tx-dly 0, clock 400000
  167. emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
  168. emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
  169. co-phase 0x3, tx-dly 0, clock 400000
  170. co-phase 0x1, tx-dly 0, clock 40000000
  171. [set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
  172. init_part() 297: PART_TYPE_AML
  173. [mmc_init] mmc init success
  174. start dts,buffer=0000000073d2d620,dt_addr=0000000073d2d620
  175. get_partition_from_dts() 92: ret 0
  176. parts: 17
  177. 00: logo0000000000800000 1
  178. 01: recovery0000000001800000 1
  179. 02: misc0000000000800000 1
  180. 03: dtbo0000000000800000 1
  181. 04: cri_data0000000000800000 2
  182. 05: param0000000001000000 2
  183. 06: boot0000000001000000 1
  184. set has_boot_slot = 0
  185. 07: rsv0000000001000000 1
  186. 08: metadata0000000001000000 1
  187. 09: vbmeta0000000000200000 1
  188. 10: tee0000000002000000 1
  189. 11: vendor000000001c000000 1
  190. 12: odm0000000008000000 1
  191. 13: system0000000050000000 1
  192. 14: product0000000008000000 1
  193. 15: cache0000000046000000 2
  194. 16: dataffffffffffffffff 4
  195. init_part() 297: PART_TYPE_AML
  196. eMMC/TSD partition table have been checked OK!
  197. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  198. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  199. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  200. mmc env offset: 0x4d400000
  201. In: serial
  202. Out: serial
  203. Err: serial
  204. reboot_mode=cold_boot
  205. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  206. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  207. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  208. dtb_read()-3569: total valid 2
  209. update_old_dtb()-3550: do nothing
  210. aml_i2c_init_port init regs for 0
  211. fusb302_init: Device ID: 0x91
  212. CC connected in 0 as UFP
  213. fusb302 detect chip.port_num = 0
  214. amlkey_init() enter!
  215. [EFUSE_MSG]keynum is 1
  216. vpu: driver version: v20190313
  217. vpu: detect chip type: 9
  218. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  219. vpu: clk_level in dts: 7
  220. vpu: vpu_power_on
  221. vpu: set_vpu_clk
  222. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  223. vpu: set_vpu_clk finish
  224. vpu: vpu_module_init_config
  225. vpp: vpp_init
  226. vpp: vpp osd2 matrix rgb2yuv..............
  227. hdr_func 4, hdr_process_select 0x1
  228. cvbs: cpuid:0x29
  229. cvbs: find performance_pal config
  230. LCD_RESET PIN: 0
  231. lcd: lcd_debug_print flag: 0
  232. lcd: detect mode: tablet, key_valid: 0
  233. lcd: detect lcd_clk_path: 1
  234. lcd: failed to get lcd_cpu_gpio_names
  235. lcd: load config from dts
  236. lcd: pinctrl_version: 2
  237. lcd: use panel_type=lcd_1
  238. lcd: bl: pinctrl_version: 2
  239. lcd: bl: name: backlight_pwm, method: 1
  240. lcd: error: gpio: wrong name invalid
  241. lcd: bl: pwm_reg=0x00800002
  242. lcd: bl: aml_bl_power_ctrl: 0
  243. Net: use internal ethernet
  244. --------ext_ethernet=0
  245. +++++++++ext_ethernet=0
  246. dwmac.ff3f0000 Waiting for PHY auto negotiation to complete.... done
  247. The Best Window is index 40
  248. [KM]Msg:isEncrypt=
  249. [KM]Msg:keyAttr is 0x00000000
  250. dwmac.ff3f0000amlkey_init() enter!
  251. amlkey_init() 71: already init!
  252. [EFUSE_MSG]keynum is 1
  253.  
  254. ramdump_init, add:0, size:0
  255. CONFIG_AVB2: null
  256. Start read misc partition datas!
  257. info->magic =
  258. info->version_major = 1
  259. info->version_minor = 0
  260. info->slots[0].priority = 15
  261. info->slots[0].tries_remaining = 7
  262. info->slots[0].successful_boot = 0
  263. info->slots[1].priority = 14
  264. info->slots[1].tries_remaining = 7
  265. info->slots[1].successful_boot = 0
  266. info->crc32 = -1075449479
  267. active slot = 0
  268.  
  269. wipe_data=successful
  270. wipe_cache=successful
  271. upgrade_step=2
  272. reboot_mode:::: cold_boot
  273. lcd: error: outputmode[1600x1200p60hz] is not support
  274. hpd_state=1
  275. do_hpd_detect: hdmimode=1600x1200p60hz
  276. do_hpd_detect: colorattribute=422,12bit
  277. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  278. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  279. sink preferred_mode is 1080p60hz[16]
  280. hdmi screen is not single resolution
  281. hdr mode is 0
  282. dv mode is ver:0 len: 0
  283. hdr10+ mode is 0
  284. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  285. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  286. read hdmichecksum 0x703e0000, colorattribute 422,12bit
  287. read hdmimode 1600x1200p60hz, colorspace <NULL>, colordepth <NULL>
  288. do_get_parse_edid: autoMode = false, manualMode=790
  289. isYuv4kSink: false, maxTMDSRate=225
  290. do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
  291. do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
  292. TV is same, initial mode is: 1600x1200p60hz attr: 422,12bit
  293. dolby_status 0
  294. dolby_status 0
  295. dolby_vision_process: hpd: dv disabled
  296. Saving Environment to aml-storage...
  297. mmc env offset: 0x4d400000
  298. Writing to MMC(1)... done
  299. [OSD]load fb addr from dts:/meson-fb
  300. [OSD]set initrd_high: 0x7f800000
  301. [OSD]fb_addr for logo: 0x7f800000
  302. [OSD]load fb addr from dts:/meson-fb
  303. [OSD]fb_addr for logo: 0x7f800000
  304. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  305. [CANVAS]canvas init
  306. [CANVAS]addr=0x7f800000 width=3840, height=2160
  307. [OSD]osd_hw.free_dst_data: 0,1599,0,1199
  308. [OSD]osd1_update_disp_freescale_enable
  309. cvbs: outputmode[1600x1200p60hz] is invalid
  310. vpp: vpp_matrix_update: 2
  311. set hdmitx VIC = 790
  312. aml_audio_init
  313. config HPLL = 1620000 frac_rate = 1
  314. HPLL: 0xdb000486
  315. config HPLL done
  316. j = 22 vid_clk_div = 2
  317. hdmitx: set enc for VIC: 790
  318. hdmitx phy setting done
  319. rx version is 2.0 div=10
  320. hdmtix: set audio
  321. hdmi_tx_set: save mode: 1600x1200p60hz, attr: 422,12bit, hdmichecksum: 0x703e0000
  322. hdr_packet
  323. vpp: hdr_policy = 0
  324. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  325. normal power on
  326. boot wol: disable
  327. [reg_31] 0xd8a
  328. [reg_16] 0x0
  329. [reg_17] 0x7fff
  330. [reg_19] 0x0
  331. [reg_31] 0x0
  332. [reg_31] 0xd40
  333. [reg_22] 0x0
  334. [reg_31] 0x0
  335. saradc: 0x28a, hw_ver: 0x32 (VIM3.V12)
  336.  
  337.  
  338. gpio: pin GPIOAO_7 (gpio 7) value is 1
  339. port mode is usb3.0
  340. Command: bcb uboot-command
  341. Start read misc partition datas!
  342. BCB hasn't any datas,exit!
  343.  
  344.  
  345. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
  346. kvim3# printenv hdmimode outputmode
  347. hdmimode=1600x1200p60hz
  348. outputmode=1600x1200p60hz
  349. kvim3#
  350. hdmimode=1600x1200p60hz
  351. outputmode=1600x1200p60hz
  352. kvim3#
  353. hdmimode=1600x1200p60hz
  354. outputmode=1600x1200p60hz
  355. kvim3#
  356. hdmimode=1600x1200p60hz
  357. outputmode=1600x1200p60hz
  358. kvim3#
  359. hdmimode=1600x1200p60hz
  360. outputmode=1600x1200p60hz
  361. kvim3#setenv hdmimod e 1920x1200p60hz
  362. kvim3#setenv outputmi ode 1920x1200p60hz
  363. kvim3#
  364. kvim3#
  365. kvim3#
  366. kvim3#
  367. kvim3#
  368. kvim3#printenv hdmimode saveenv
  369. Saving Environment to aml-storage...
  370. mmc env offset: 0x4d400000
  371. Writing to MMC(1)... done
  372. kvim3#
  373. kvim3#
  374. kvim3#
  375. kvim3#
  376. kvim3#prit ntenv hdmio md o mode outputmode
  377. hdmimode=1920x1200p60hz
  378. outputmode=1920x1200p60hz
  379. kvim3#
  380. hdmimode=1920x1200p60hz
  381. outputmode=1920x1200p60hz
  382. kvim3#
  383. hdmimode=1920x1200p60hz
  384. outputmode=1920x1200p60hz
  385. kvim3#
  386. hdmimode=1920x1200p60hz
  387. outputmode=1920x1200p60hz
  388. kvim3#reboot
  389. reboot use default mode: normal
  390. bl31 reboot reason: 0xd
  391. bl31 reboot reason: 0x1
  392. system cmd 1.
  393.  
  394. G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
  395. bl2_stage_init 0x01
  396. bl2_stage_init 0x81
  397. hw id: 0x0000 - pwm id 0x01
  398. bl2_stage_init 0xc1
  399. bl2_stage_init 0x02
  400.  
  401. L0:00000000
  402. L1:20000703
  403. L2:00008067
  404. L3:14000000
  405. B2:00402000
  406. B1:e0f83180
  407.  
  408. TE: 133757
  409.  
  410. BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
  411.  
  412. Board ID = 8
  413. Set A53 clk to 24M
  414. Set A73 clk to 24M
  415. Set clk81 to 24M
  416. A53 clk: 1200 MHz
  417. A73 clk: 1200 MHz
  418. CLK81: 166.6M
  419. smccc: 00025361
  420. eMMC boot @ 0
  421. sw8 s
  422. board id: 8
  423. Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  424. Get wrong ddr fw magic! Error!!
  425. fw parse done
  426. PIEI prepare done
  427. 00000000
  428. emmc switch 1 ok
  429. ddr saved addr:00016000
  430. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  431. 00000000
  432. emmc switch 0 ok
  433. fastboot data verify
  434. result: 255
  435. Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
  436. LPDDR4 probe
  437.  
  438. LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
  439. ddr clk to 1608MHz
  440.  
  441. dmc_version 0001
  442. Check phy result
  443. INFO : ERROR : Training has failed!
  444. Check phy result
  445. INFO : ERROR : Training has failed!
  446. Check phy result
  447. INFO : End of initialization
  448. INFO : ERROR : Training has failed!
  449. 1D training failed
  450. Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
  451. LPDDR4 probe
  452. ddr clk to 1608MHz
  453.  
  454. dmc_version 0001
  455. Check phy result
  456. INFO : End of CA training
  457. INFO : End of initialization
  458. INFO : Training has run successfully!
  459. Check phy result
  460. INFO : End of initialization
  461. INFO : End of read enable training
  462. INFO : End of fine write leveling
  463. INFO : End of read dq deskew training
  464. INFO : End of MPR read delay center optimization
  465. INFO : End of Write leveling coarse delay
  466. INFO : End of read delay center optimization
  467. INFO : Training has run successfully!
  468. Check phy result
  469. INFO : End of initialization
  470. INFO : End of MPR read delay center optimization
  471. INFO : End of write delay center optimization
  472. INFO : End of read delay center optimization
  473. INFO : End of max read latency training
  474. INFO : Training has run successfully!
  475. 1D training succeed
  476. Check phy result
  477. INFO : End of initialization
  478. INFO : End of 2D read delay Voltage center optimization
  479. INFO : End of 2D read delay Voltage center optimization
  480. INFO : End of 2D write delay Voltage center optimization
  481. INFO : End of 2D write delay Voltage center optimization
  482. INFO : Training has run successfully!
  483.  
  484. soc_vref_reg_value 0x 00000027 00000028 00000026 00000027 00000027 00000027 00000027 00000027 00000028 00000024 00000027 00000028 00000027 00000028 00000025 00000027 00000025 00000027 00000026 00000025 00000025 00000027 00000026 00000026 00000028 00000024 00000025 00000026 00000025 00000025 00000027 00000027 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  485. dram_vref_reg_value 0x 00000013
  486. 2D training succeed
  487. auto size-- 65535DDR cs0 size: 2048MB
  488. DDR cs1 size: 0MB
  489. DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
  490. cs0 DataBus test pass
  491. cs0 AddrBus test pass
  492.  
  493. non-sec scramble use zero key
  494. ddr scramble enabled
  495.  
  496. 100bdlr_step_size ps== 420
  497. result report
  498. boot times 1Enable ddr reg access
  499. 00000000
  500. emmc switch 3 ok
  501. Authentication key not yet programmed
  502. get rpmb counter error 0x00000007
  503. 00000000
  504. emmc switch 0 ok
  505. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  506. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x0010ac00, part: 0
  507. 0.0;M3 CHK:0;cm4_sp_mode 0
  508.  
  509. [Image: g12b_v1.1.3396-c893a7153 2020-11-11 13:54:36 gongwei.chen@droid11-sz]
  510.  
  511. OPS=0x10
  512.  
  513. ring efuse init
  514.  
  515. chipver efuse init
  516.  
  517. 29 0b 10 00 01 1c 0d 00 00 0e 35 37 4d 4d 4e 50
  518.  
  519. [0.924774 Inits done]
  520.  
  521. secure task start!
  522. high task start!
  523. low task start!
  524. run into bl31
  525. NOTICE: BL31: v1.3(release):5c909a099
  526. NOTICE: BL31: Built : 17:18:21, Nov 20 2020
  527. NOTICE: BL31: G12A normal boot!
  528. NOTICE: BL31: BL33 decompress pass
  529. ERROR: Error initializing runtime service opteed_fast
  530.  
  531.  
  532. U-Boot 2015.01-g0ee066b06d-dirty (May 27 2021 - 16:17:37)
  533.  
  534. DRAM: 2 GiB
  535. Relocation Offset is: 76d38000
  536. mmu cfg end: 0x80000000
  537. mmu cfg end: 0x80000000
  538. spi_post_bind(spifc): req_seq = 0
  539. register usb cfg[0][1] = 0000000077e82640
  540. aml_i2c_init_port init regs for 0
  541. MCU version: 0x00 0x03
  542. MCU version is to low! Doesn't support froce boot from SD card.
  543. NAND: get_sys_clk_rate_mtd() 292, clock setting 200!
  544. bus cycle0: 6,timing: 7
  545. NAND device id: 0 9f ff ff ff ff
  546. No NAND device found!!!
  547. nand init failed: -6
  548. get_sys_clk_rate_mtd() 292, clock setting 200!
  549. bus cycle0: 6,timing: 7
  550. NAND device id: 0 9f ff ff ff ff
  551. No NAND device found!!!
  552. nand init failed: -6
  553. MMC: aml_priv->desc_buf = 0x0000000073d28a70
  554. aml_priv->desc_buf = 0x0000000073d2adb0
  555. SDIO Port B: 0, SDIO Port C: 1
  556. co-phase 0x3, tx-dly 0, clock 400000
  557. co-phase 0x3, tx-dly 0, clock 400000
  558. co-phase 0x3, tx-dly 0, clock 400000
  559. emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
  560. emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
  561. co-phase 0x3, tx-dly 0, clock 400000
  562. co-phase 0x1, tx-dly 0, clock 40000000
  563. [set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
  564. init_part() 297: PART_TYPE_AML
  565. [mmc_init] mmc init success
  566. start dts,buffer=0000000073d2d620,dt_addr=0000000073d2d620
  567. get_partition_from_dts() 92: ret 0
  568. parts: 17
  569. 00: logo0000000000800000 1
  570. 01: recovery0000000001800000 1
  571. 02: misc0000000000800000 1
  572. 03: dtbo0000000000800000 1
  573. 04: cri_data0000000000800000 2
  574. 05: param0000000001000000 2
  575. 06: boot0000000001000000 1
  576. set has_boot_slot = 0
  577. 07: rsv0000000001000000 1
  578. 08: metadata0000000001000000 1
  579. 09: vbmeta0000000000200000 1
  580. 10: tee0000000002000000 1
  581. 11: vendor000000001c000000 1
  582. 12: odm0000000008000000 1
  583. 13: system0000000050000000 1
  584. 14: product0000000008000000 1
  585. 15: cache0000000046000000 2
  586. 16: dataffffffffffffffff 4
  587. init_part() 297: PART_TYPE_AML
  588. eMMC/TSD partition table have been checked OK!
  589. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  590. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  591. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  592. mmc env offset: 0x4d400000
  593. In: serial
  594. Out: serial
  595. Err: serial
  596. reboot_mode=normal
  597. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  598. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  599. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  600. dtb_read()-3569: total valid 2
  601. update_old_dtb()-3550: do nothing
  602. aml_i2c_init_port init regs for 0
  603. fusb302_init: Device ID: 0x91
  604. CC connected in 0 as UFP
  605. fusb302 detect chip.port_num = 0
  606. amlkey_init() enter!
  607. [EFUSE_MSG]keynum is 1
  608. vpu: driver version: v20190313
  609. vpu: detect chip type: 9
  610. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  611. vpu: clk_level in dts: 7
  612. vpu: vpu_power_on
  613. vpu: set_vpu_clk
  614. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  615. vpu: set_vpu_clk finish
  616. vpu: vpu_module_init_config
  617. vpp: vpp_init
  618. vpp: vpp osd2 matrix rgb2yuv..............
  619. hdr_func 4, hdr_process_select 0x1
  620. cvbs: cpuid:0x29
  621. cvbs: find performance_pal config
  622. LCD_RESET PIN: 0
  623. lcd: lcd_debug_print flag: 0
  624. lcd: detect mode: tablet, key_valid: 0
  625. lcd: detect lcd_clk_path: 1
  626. lcd: failed to get lcd_cpu_gpio_names
  627. lcd: load config from dts
  628. lcd: pinctrl_version: 2
  629. lcd: use panel_type=lcd_1
  630. lcd: bl: pinctrl_version: 2
  631. lcd: bl: name: backlight_pwm, method: 1
  632. lcd: error: gpio: wrong name invalid
  633. lcd: bl: pwm_reg=0x00800002
  634. lcd: bl: aml_bl_power_ctrl: 0
  635. Net: use internal ethernet
  636. --------ext_ethernet=0
  637. +++++++++ext_ethernet=0
  638. dwmac.ff3f0000 Waiting for PHY auto negotiation to complete.... done
  639. The Best Window is index 40
  640. [KM]Msg:isEncrypt=
  641. [KM]Msg:keyAttr is 0x00000000
  642. dwmac.ff3f0000amlkey_init() enter!
  643. amlkey_init() 71: already init!
  644. [EFUSE_MSG]keynum is 1
  645.  
  646. ramdump_init, add:0, size:0
  647. CONFIG_AVB2: null
  648. Start read misc partition datas!
  649. info->magic =
  650. info->version_major = 1
  651. info->version_minor = 0
  652. info->slots[0].priority = 15
  653. info->slots[0].tries_remaining = 7
  654. info->slots[0].successful_boot = 0
  655. info->slots[1].priority = 14
  656. info->slots[1].tries_remaining = 7
  657. info->slots[1].successful_boot = 0
  658. info->crc32 = -1075449479
  659. active slot = 0
  660.  
  661. wipe_data=successful
  662. wipe_cache=successful
  663. upgrade_step=2
  664. reboot_mode:::: normal
  665. lcd: error: outputmode[1920x1200p60hz] is not support
  666. hpd_state=1
  667. do_hpd_detect: hdmimode=1920x1200p60hz
  668. do_hpd_detect: colorattribute=422,12bit
  669. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  670. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  671. sink preferred_mode is 1080p60hz[16]
  672. hdmi screen is not single resolution
  673. hdr mode is 0
  674. dv mode is ver:0 len: 0
  675. hdr10+ mode is 0
  676. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  677. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  678. read hdmichecksum 0x703e0000, colorattribute 422,12bit
  679. read hdmimode 1920x1200p60hz, colorspace <NULL>, colordepth <NULL>
  680. do_get_parse_edid: autoMode = false, manualMode=792
  681. isYuv4kSink: false, maxTMDSRate=225
  682. do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
  683. do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
  684. TV is same, initial mode is: 1920x1200p60hz attr: 422,12bit
  685. dolby_status 0
  686. dolby_status 0
  687. dolby_vision_process: hpd: dv disabled
  688. Saving Environment to aml-storage...
  689. mmc env offset: 0x4d400000
  690. Writing to MMC(1)... done
  691. [OSD]load fb addr from dts:/meson-fb
  692. [OSD]set initrd_high: 0x7f800000
  693. [OSD]fb_addr for logo: 0x7f800000
  694. [OSD]load fb addr from dts:/meson-fb
  695. [OSD]fb_addr for logo: 0x7f800000
  696. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  697. [CANVAS]canvas init
  698. [CANVAS]addr=0x7f800000 width=3840, height=2160
  699. [OSD]osd_hw.free_dst_data: 0,1919,0,1199
  700. [OSD]osd1_update_disp_freescale_enable
  701. cvbs: outputmode[1920x1200p60hz] is invalid
  702. vpp: vpp_matrix_update: 2
  703. set hdmitx VIC = 792
  704. aml_audio_init
  705. config HPLL = 1932500 frac_rate = 1
  706. HPLL: 0xdb0004a1
  707. config HPLL done
  708. j = 29 vid_clk_div = 2
  709. hdmitx: set enc for VIC: 792
  710. hdmitx phy setting done
  711. rx version is 2.0 div=10
  712. hdmtix: set audio
  713. hdmi_tx_set: save mode: 1920x1200p60hz, attr: 422,12bit, hdmichecksum: 0x703e0000
  714. hdr_packet
  715. vpp: hdr_policy = 0
  716. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  717. normal power on
  718. boot wol: disable
  719. [reg_31] 0xd8a
  720. [reg_16] 0x0
  721. [reg_17] 0x7fff
  722. [reg_19] 0x0
  723. [reg_31] 0x0
  724. [reg_31] 0xd40
  725. [reg_22] 0x0
  726. [reg_31] 0x0
  727. saradc: 0x28a, hw_ver: 0x32 (VIM3.V12)
  728.  
  729.  
  730. gpio: pin GPIOAO_7 (gpio 7) value is 1
  731. port mode is usb3.0
  732. Command: bcb uboot-command
  733. Start read misc partition datas!
  734. BCB hasn't any datas,exit!
  735. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
  736. kvim3# printenv hdmimode outputmode
  737. hdmimode=1920x1200p60hz
  738. outputmode=1920x1200p60hz
  739. kvim3#
  740. hdmimode=1920x1200p60hz
  741. outputmode=1920x1200p60hz
  742. kvim3#
  743. hdmimode=1920x1200p60hz
  744. outputmode=1920x1200p60hz
  745. kvim3#
  746. hdmimode=1920x1200p60hz
  747. outputmode=1920x1200p60hz
  748. kvim3#
  749. hdmimode=1920x1200p60hz
  750. outputmode=1920x1200p60hz
  751. kvim3#
  752. hdmimode=1920x1200p60hz
  753. outputmode=1920x1200p60hz
  754. kvim3#reboot
  755. reboot use default mode: normal
  756. bl31 reboot reason: 0xd
  757. bl31 reboot reason: 0x1
  758. system cmd 1.
  759.  
  760. G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
  761. bl2_stage_init 0x01
  762. bl2_stage_init 0x81
  763. hw id: 0x0000 - pwm id 0x01
  764. bl2_stage_init 0xc1
  765. bl2_stage_init 0x02
  766.  
  767. L0:00000000
  768. L1:20000703
  769. L2:00008067
  770. L3:14000000
  771. B2:00402000
  772. B1:e0f83180
  773.  
  774. TE: 136340
  775.  
  776. BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
  777.  
  778. Board ID = 8
  779. Set A53 clk to 24M
  780. Set A73 clk to 24M
  781. Set clk81 to 24M
  782. A53 clk: 1200 MHz
  783. A73 clk: 1200 MHz
  784. CLK81: 166.6M
  785. smccc: 00025d78
  786. eMMC boot @ 0
  787. sw8 s
  788. board id: 8
  789. Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  790. Get wrong ddr fw magic! Error!!
  791. fw parse done
  792. PIEI prepare done
  793. 00000000
  794. emmc switch 1 ok
  795. ddr saved addr:00016000
  796. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  797. 00000000
  798. emmc switch 0 ok
  799. fastboot data verify
  800. result: 255
  801. Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
  802. LPDDR4 probe
  803.  
  804. LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
  805. ddr clk to 1608MHz
  806.  
  807. dmc_version 0001
  808. Check phy result
  809. INFO : ERROR : Training has failed!
  810. Check phy result
  811. INFO : ERROR : Training has failed!
  812. Check phy result
  813. INFO : End of initialization
  814. INFO : ERROR : Training has failed!
  815. 1D training failed
  816. Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
  817. LPDDR4 probe
  818. ddr clk to 1608MHz
  819.  
  820. dmc_version 0001
  821. Check phy result
  822. INFO : End of CA training
  823. INFO : End of initialization
  824. INFO : Training has run successfully!
  825. Check phy result
  826. INFO : End of initialization
  827. INFO : End of read enable training
  828. INFO : End of fine write leveling
  829. INFO : End of read dq deskew training
  830. INFO : End of MPR read delay center optimization
  831. INFO : End of Write leveling coarse delay
  832. INFO : End of read delay center optimization
  833. INFO : Training has run successfully!
  834. Check phy result
  835. INFO : End of initialization
  836. INFO : End of MPR read delay center optimization
  837. INFO : End of write delay center optimization
  838. INFO : End of read delay center optimization
  839. INFO : End of max read latency training
  840. INFO : Training has run successfully!
  841. 1D training succeed
  842. Check phy result
  843. INFO : End of initialization
  844. INFO : End of 2D read delay Voltage center optimization
  845. INFO : End of 2D read delay Voltage center optimization
  846. INFO : End of 2D write delay Voltage center optimization
  847. INFO : End of 2D write delay Voltage center optimization
  848. INFO : Training has run successfully!
  849.  
  850. soc_vref_reg_value 0x 00000027 00000028 00000026 00000027 00000027 00000027 00000027 00000027 00000028 00000024 00000027 00000028 00000027 00000028 00000025 00000027 00000025 00000027 00000026 00000026 00000025 00000028 00000026 00000026 00000028 00000025 00000025 00000027 00000025 00000026 00000027 00000027 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  851. dram_vref_reg_value 0x 00000013
  852. 2D training succeed
  853. auto size-- 65535DDR cs0 size: 2048MB
  854. DDR cs1 size: 0MB
  855. DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
  856. cs0 DataBus test pass
  857. cs0 AddrBus test pass
  858.  
  859. non-sec scramble use zero key
  860. ddr scramble enabled
  861.  
  862. 100bdlr_step_size ps== 420
  863. result report
  864. boot times 2Enable ddr reg access
  865. 00000000
  866. emmc switch 3 ok
  867. Authentication key not yet programmed
  868. get rpmb counter error 0x00000007
  869. 00000000
  870. emmc switch 0 ok
  871. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  872. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x0010ac00, part: 0
  873. 0.0;M3 CHK:0;cm4_sp_mode 0
  874.  
  875. [Image: g12b_v1.1.3396-c893a7153 2020-11-11 13:54:36 gongwei.chen@droid11-sz]
  876.  
  877. OPS=0x10
  878.  
  879. ring efuse init
  880.  
  881. chipver efuse init
  882.  
  883. 29 0b 10 00 01 1c 0d 00 00 0e 35 37 4d 4d 4e 50
  884.  
  885. [0.925729 Inits done]
  886.  
  887. secure task start!
  888. high task start!
  889. low task start!
  890. run into bl31
  891. NOTICE: BL31: v1.3(release):5c909a099
  892. NOTICE: BL31: Built : 17:18:21, Nov 20 2020
  893. NOTICE: BL31: G12A normal boot!
  894. NOTICE: BL31: BL33 decompress pass
  895. ERROR: Error initializing runtime service opteed_fast
  896.  
  897.  
  898. U-Boot 2015.01-g0ee066b06d-dirty (May 27 2021 - 16:17:37)
  899.  
  900. DRAM: 2 GiB
  901. Relocation Offset is: 76d38000
  902. mmu cfg end: 0x80000000
  903. mmu cfg end: 0x80000000
  904. spi_post_bind(spifc): req_seq = 0
  905. register usb cfg[0][1] = 0000000077e82640
  906. aml_i2c_init_port init regs for 0
  907. MCU version: 0x00 0x03
  908. MCU version is to low! Doesn't support froce boot from SD card.
  909. NAND: get_sys_clk_rate_mtd() 292, clock setting 200!
  910. bus cycle0: 6,timing: 7
  911. NAND device id: 0 9f ff ff ff ff
  912. No NAND device found!!!
  913. nand init failed: -6
  914. get_sys_clk_rate_mtd() 292, clock setting 200!
  915. bus cycle0: 6,timing: 7
  916. NAND device id: 0 9f ff ff ff ff
  917. No NAND device found!!!
  918. nand init failed: -6
  919. MMC: aml_priv->desc_buf = 0x0000000073d28a70
  920. aml_priv->desc_buf = 0x0000000073d2adb0
  921. SDIO Port B: 0, SDIO Port C: 1
  922. co-phase 0x3, tx-dly 0, clock 400000
  923. co-phase 0x3, tx-dly 0, clock 400000
  924. co-phase 0x3, tx-dly 0, clock 400000
  925. emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
  926. emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
  927. co-phase 0x3, tx-dly 0, clock 400000
  928. co-phase 0x1, tx-dly 0, clock 40000000
  929. [set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
  930. init_part() 297: PART_TYPE_AML
  931. [mmc_init] mmc init success
  932. start dts,buffer=0000000073d2d620,dt_addr=0000000073d2d620
  933. get_partition_from_dts() 92: ret 0
  934. parts: 17
  935. 00: logo0000000000800000 1
  936. 01: recovery0000000001800000 1
  937. 02: misc0000000000800000 1
  938. 03: dtbo0000000000800000 1
  939. 04: cri_data0000000000800000 2
  940. 05: param0000000001000000 2
  941. 06: boot0000000001000000 1
  942. set has_boot_slot = 0
  943. 07: rsv0000000001000000 1
  944. 08: metadata0000000001000000 1
  945. 09: vbmeta0000000000200000 1
  946. 10: tee0000000002000000 1
  947. 11: vendor000000001c000000 1
  948. 12: odm0000000008000000 1
  949. 13: system0000000050000000 1
  950. 14: product0000000008000000 1
  951. 15: cache0000000046000000 2
  952. 16: dataffffffffffffffff 4
  953. init_part() 297: PART_TYPE_AML
  954. eMMC/TSD partition table have been checked OK!
  955. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  956. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  957. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  958. mmc env offset: 0x4d400000
  959. In: serial
  960. Out: serial
  961. Err: serial
  962. reboot_mode=normal
  963. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  964. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  965. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  966. dtb_read()-3569: total valid 2
  967. update_old_dtb()-3550: do nothing
  968. aml_i2c_init_port init regs for 0
  969. fusb302_init: Device ID: 0x91
  970. CC connected in 0 as UFP
  971. fusb302 detect chip.port_num = 0
  972. amlkey_init() enter!
  973. [EFUSE_MSG]keynum is 1
  974. vpu: driver version: v20190313
  975. vpu: detect chip type: 9
  976. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  977. vpu: clk_level in dts: 7
  978. vpu: vpu_power_on
  979. vpu: set_vpu_clk
  980. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  981. vpu: set_vpu_clk finish
  982. vpu: vpu_module_init_config
  983. vpp: vpp_init
  984. vpp: vpp osd2 matrix rgb2yuv..............
  985. hdr_func 4, hdr_process_select 0x1
  986. cvbs: cpuid:0x29
  987. cvbs: find performance_pal config
  988. LCD_RESET PIN: 0
  989. lcd: lcd_debug_print flag: 0
  990. lcd: detect mode: tablet, key_valid: 0
  991. lcd: detect lcd_clk_path: 1
  992. lcd: failed to get lcd_cpu_gpio_names
  993. lcd: load config from dts
  994. lcd: pinctrl_version: 2
  995. lcd: use panel_type=lcd_1
  996. lcd: bl: pinctrl_version: 2
  997. lcd: bl: name: backlight_pwm, method: 1
  998. lcd: error: gpio: wrong name invalid
  999. lcd: bl: pwm_reg=0x00800002
  1000. lcd: bl: aml_bl_power_ctrl: 0
  1001. Net: use internal ethernet
  1002. --------ext_ethernet=0
  1003. +++++++++ext_ethernet=0
  1004. dwmac.ff3f0000 Waiting for PHY auto negotiation to complete.... done
  1005. The Best Window is index 40
  1006. [KM]Msg:isEncrypt=
  1007. [KM]Msg:keyAttr is 0x00000000
  1008. dwmac.ff3f0000amlkey_init() enter!
  1009. amlkey_init() 71: already init!
  1010. [EFUSE_MSG]keynum is 1
  1011.  
  1012. ramdump_init, add:0, size:0
  1013. CONFIG_AVB2: null
  1014. Start read misc partition datas!
  1015. info->magic =
  1016. info->version_major = 1
  1017. info->version_minor = 0
  1018. info->slots[0].priority = 15
  1019. info->slots[0].tries_remaining = 7
  1020. info->slots[0].successful_boot = 0
  1021. info->slots[1].priority = 14
  1022. info->slots[1].tries_remaining = 7
  1023. info->slots[1].successful_boot = 0
  1024. info->crc32 = -1075449479
  1025. active slot = 0
  1026.  
  1027. wipe_data=successful
  1028. wipe_cache=successful
  1029. upgrade_step=2
  1030. reboot_mode:::: normal
  1031. lcd: error: outputmode[1920x1200p60hz] is not support
  1032. hpd_state=1
  1033. do_hpd_detect: hdmimode=1920x1200p60hz
  1034. do_hpd_detect: colorattribute=422,12bit
  1035. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  1036. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  1037. sink preferred_mode is 1080p60hz[16]
  1038. hdmi screen is not single resolution
  1039. hdr mode is 0
  1040. dv mode is ver:0 len: 0
  1041. hdr10+ mode is 0
  1042. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  1043. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  1044. read hdmichecksum 0x703e0000, colorattribute 422,12bit
  1045. read hdmimode 1920x1200p60hz, colorspace <NULL>, colordepth <NULL>
  1046. do_get_parse_edid: autoMode = false, manualMode=792
  1047. isYuv4kSink: false, maxTMDSRate=225
  1048. do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
  1049. do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
  1050. TV is same, initial mode is: 1920x1200p60hz attr: 422,12bit
  1051. dolby_status 0
  1052. dolby_status 0
  1053. dolby_vision_process: hpd: dv disabled
  1054. Saving Environment to aml-storage...
  1055. mmc env offset: 0x4d400000
  1056. Writing to MMC(1)... done
  1057. [OSD]load fb addr from dts:/meson-fb
  1058. [OSD]set initrd_high: 0x7f800000
  1059. [OSD]fb_addr for logo: 0x7f800000
  1060. [OSD]load fb addr from dts:/meson-fb
  1061. [OSD]fb_addr for logo: 0x7f800000
  1062. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  1063. [CANVAS]canvas init
  1064. [CANVAS]addr=0x7f800000 width=3840, height=2160
  1065. [OSD]osd_hw.free_dst_data: 0,1919,0,1199
  1066. [OSD]osd1_update_disp_freescale_enable
  1067. cvbs: outputmode[1920x1200p60hz] is invalid
  1068. vpp: vpp_matrix_update: 2
  1069. set hdmitx VIC = 792
  1070. aml_audio_init
  1071. config HPLL = 1932500 frac_rate = 1
  1072. HPLL: 0xdb0004a1
  1073. config HPLL done
  1074. j = 29 vid_clk_div = 2
  1075. hdmitx: set enc for VIC: 792
  1076. hdmitx phy setting done
  1077. rx version is 2.0 div=10
  1078. hdmtix: set audio
  1079. hdmi_tx_set: save mode: 1920x1200p60hz, attr: 422,12bit, hdmichecksum: 0x703e0000
  1080. hdr_packet
  1081. vpp: hdr_policy = 0
  1082. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  1083. normal power on
  1084. boot wol: disable
  1085. [reg_31] 0xd8a
  1086. [reg_16] 0x0
  1087. [reg_17] 0x7fff
  1088. [reg_19] 0x0
  1089. [reg_31] 0x0
  1090. [reg_31] 0xd40
  1091. [reg_22] 0x0
  1092. [reg_31] 0x0
  1093. saradc: 0x28a, hw_ver: 0x32 (VIM3.V12)
  1094.  
  1095.  
  1096. gpio: pin GPIOAO_7 (gpio 7) value is 1
  1097. port mode is usb3.0
  1098. Command: bcb uboot-command
  1099. Start read misc partition datas!
  1100. BCB hasn't any datas,exit!
  1101. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
  1102. cfgload: start ...
  1103. cfgload: reading /boot.ini from mmc 0:1 ...
  1104. card out
  1105. ** Bad device mmc 0 **
  1106. cfgload: no /boot.ini or empty file on mmc 0:1
  1107. cfgload: reading /boot.ini from mmc 1:1 ...
  1108. Failed to mount ext2 filesystem...
  1109. ** Unrecognized filesystem type **
  1110. cfgload: no /boot.ini or empty file on mmc 1:1
  1111. cfgload: reading /boot/boot.ini from mmc 1:5 ...
  1112. Failed to mount ext2 filesystem...
  1113. ** Unrecognized filesystem type **
  1114. cfgload: no /boot/boot.ini or empty file on mmc 1:5
  1115. cfgload: failed to read boot.ini on all partitions!
  1116. CONFIG_SYSTEM_AS_ROOT: systemroot
  1117. system_mode: 1
  1118. active_slot: normal
  1119. avb2: 0
  1120. ee_gate_off ...
  1121. avb2: 0
  1122. ## Booting Android Image at 0x03080000 ...
  1123. Kernel command line: androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
  1124. [store]Is good fdt check header, no need decrypt!
  1125. active_slot is normal
  1126. load dtb from 0x1000000 ......
  1127. find 1 dtbos
  1128. dtbos to be applied: 0
  1129. Apply dtbo 0
  1130. Loading Kernel Image(COMP_NONE) ... OK
  1131. kernel loaded at 0x01080000, end = 0x019889d8
  1132. Loading Device Tree to 0000000009fe6000, end 0000000009fff7a7 ... OK
  1133. fdt_fixup_memory_banks, reg:0000000000000000
  1134.  
  1135. Starting kernel ...
  1136.  
  1137. uboot time: 5559800 us
  1138. [ 0.000000@0] Booting Linux on physical CPU 0x0
  1139. [ 0.000000@0] Linux version 4.9.113-g17cb1ac873ff-dirty (root@lxx-NUC10i7FNH) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #5 SMP PREEMPT Thu May 27 17:15:28 EDT 2021
  1140. [ 0.000000@0] CPU: cpu_v7_name [410fd034] revision 4 (ARMv7), cr=10c5383d
  1141. [ 0.000000@0] CPU: div instructions available: patching division code
  1142. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1143. [ 0.000000@0] Machine model: Khadas
  1144. [ 0.000000@0] earlycon: aml-uart0 at MMIO 0xff803000 (options '')
  1145. [ 0.000000@0] bootconsole [aml-uart0] enabled
  1146. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
  1147. [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
  1148. [ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:8 MB
  1149. [ 0.000000@0] 70000000 - 78000000, 131072 KB, linux,ion-dev
  1150. [ 0.000000@0] 6d800000 - 70000000, 40960 KB, linux,di_cma
  1151. [ 0.000000@0] Reserved memory: regions without no-map are not yet supported
  1152. [ 0.000000@0] 5a400000 - 6d800000, 315392 KB, linux,codec_mm_cma
  1153. [ 0.000000@0] 5a400000 - 5a400000, 0 KB, linux,codec_mm_reserved
  1154. [ 0.000000@0] 56400000 - 5a400000, 65536 KB, linux,vdin0_cma
  1155. [ 0.000000@0] 52400000 - 56400000, 65536 KB, linux,vdin1_cma
  1156. [ 0.000000@0] 51400000 - 52400000, 16384 KB, linux,galcore
  1157. [ 0.000000@0] 49400000 - 51400000, 131072 KB, linux,isp_cma
  1158. [ 0.000000@0] 47c00000 - 49400000, 24576 KB, linux,adapt_cma
  1159. [ 0.000000@0] cma: Reserved 8 MiB at 0x47400000
  1160. [ 0.000000@0] Memory policy: Data cache writealloc
  1161. [ 0.000000@0] psci: probing for conduit method from DT.
  1162. [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
  1163. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  1164. [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
  1165. [ 0.000000@0] psci: SMC Calling Convention v1.1
  1166. [ 0.000000@0] percpu: Embedded 15 pages/cpu @ef061000 s32140 r8192 d21108 u61440
  1167. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489984
  1168. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 hdr_policy=0 hdr_priority= otg_device=1 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 fb_width=1920 fb_height=1080 vout2=,enable vout=1920x1200p60hz,enable panel_type=lcd_1 lcd_ctrl=0x00000083 hdmitx=,422,12bit hdmimode=1920x1200p60hz nativeui=enable hdmichecksum=0x703e0000 dolby_vision_on=0 frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable wol_enable=0 spi_state=0 fusb302_state=1 hwver=VIM3.V12 factory_mac=c8:63:14:70:53:53 lcd_exist=0 androidboot.hardware=amlogic androidboot.bootloader= androidboot.build.expect.baseband=N/A androidboot.serialno=c86314705353 mac=c8:63:14:70:53:53 androidboot.mac=c8:63:14:70:53:53 androidboot.rpmb_state=0 ro rootwait skip_initramfs androidboot.dt
  1169. [ 0.000000@0] am_vecm: boot hdr_policy: 0
  1170. [ 0.000000@0] fb: osd0
  1171. [ 0.000000@0] fb: loaded
  1172. [ 0.000000@0] fb: 0x3d800000
  1173. [ 0.000000@0] fb: logo_info.fb_width=1920
  1174. [ 0.000000@0] fb: logo_info.fb_height=1080
  1175. [ 0.000000@0] vout: error: get_vout2_init_mode:
  1176. [ 0.000000@0] vout: vout2: enable: 1
  1177. [ 0.000000@0] vout: 1920x1200p60hz
  1178. [ 0.000000@0] vout: enable: 1
  1179. [ 0.000000@0] lcd: panel_type: lcd_1
  1180. [ 0.000000@0] lcd: lcd_ctrl: 0x00000083
  1181. [ 0.000000@0] vout: get hdmimode: 1920x1200p60hz
  1182. [ 0.000000@0] jason hdmichecksum: 0x703e0000
  1183. [ 0.000000@0] vout: get hdmi checksum: 0x703e0000
  1184. [ 0.000000@0] get_dolby_on: 0
  1185. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  1186. [ 0.000000@0] vpp_axis_reverse: bootargs is 0
  1187. [ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
  1188. [ 0.000000@0] vdin_get_video_reverse: bootargs is 0.
  1189. [ 0.000000@0] phlock_phase_config: bootargs is 0.
  1190. [ 0.000000@0] init_wol_state, wol_enable=0
  1191. [ 0.000000@0] jason lcd_exist: 0
  1192. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1193. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1194. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1195. [ 0.000000@0] Memory: 1122120K/1966080K available (14336K kernel code, 1353K rwdata, 3396K rodata, 1024K init, 1395K bss, 41144K reserved, 802816K cma-reserved, 380928K highmem)
  1196. [ 0.000000@0] Virtual kernel memory layout:
  1197. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1198. [ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  1199. [ 0.000000@0] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  1200. [ 0.000000@0] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  1201. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1202. [ 0.000000@0] modules : 0xbc000000 - 0xbfe00000 ( 62 MB)
  1203. [ 0.000000@0] .text : 0xc0108000 - 0xc1000000 (15328 kB)
  1204. [ 0.000000@0] .init : 0xc1500000 - 0xc1600000 (1024 kB)
  1205. [ 0.000000@0] .data : 0xc1600000 - 0xc1752710 (1354 kB)
  1206. [ 0.000000@0] .bss : 0xc1754000 - 0xc18b0e44 (1396 kB)
  1207. [ 0.000000@0] zone:Normal, spaned pages:196608, total:196608
  1208. [ 0.000000@0] zone:HighMem, spaned pages:294912, total:491520
  1209. [ 0.000000@0] page_trace_mem_init, trace buffer:ee800000, size:1e0000, used:ee9e0000, end:eea00000
  1210. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  1211. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  1212. [ 0.000000@0] Build-time adjustment of leaf fanout to 32.
  1213. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  1214. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=6
  1215. [ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
  1216. [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  1217. [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
  1218. [ 0.000000@0] Meson chip version = RevB (29:B - 10:0)
  1219. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  1220. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  1221. [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  1222. [ 0.000000@0] meson_g12a_media_init: register meson media clk
  1223. [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  1224. [ 0.000000@0] meson_g12a_misc_init: done.
  1225. [ 0.000000@0] g12a_clkc_init initialization complete
  1226. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  1227. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  1228. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  1229. [ 0.008224@0] Switching to timer-based delay loop, resolution 41ns
  1230. [ 0.014472@0] meson_bc_timer: mclk->mux_reg =f080c190,mclk->reg =f080e194
  1231. [ 0.022002@0] Console: colour dummy device 80x30
  1232. [ 0.025927@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  1233. [ 0.036397@0] pid_max: default: 32768 minimum: 301
  1234. [ 0.041281@0] thread_stack_cache_init, vmap:eea25a00, bitmap:eea28400, cache page:47000
  1235. [ 0.049285@0] thread_stack_cache_init, allocation vm area:eea26f00, addr:bc000000, size:3001000
  1236. [ 0.058098@0] Security Framework initialized
  1237. [ 0.062310@0] SELinux: Initializing.
  1238. [ 0.066033@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1239. [ 0.072817@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  1240. [ 0.080763@0] CPU: Testing write buffer coherency: ok
  1241. [ 0.085135@0] ftrace: allocating 45813 entries in 135 pages
  1242. [ 0.174367@0] sched-energy: Sched-energy-costs installed from DT
  1243. [ 0.174745@0] CPU0: update cpu_capacity 631
  1244. [ 0.178981@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1245. [ 0.184835@0] Setting up static identity map for 0x200000 - 0x200058
  1246. [ 0.240107@0] secmon: clear_range:5100000 200000
  1247. [ 0.288165@1] CPU1: update cpu_capacity 631
  1248. [ 0.288170@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1249. [ 0.320812@2] CPU2: update cpu_capacity 1192
  1250. [ 0.320818@2] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
  1251. [ 0.352381@3] CPU3: update cpu_capacity 1192
  1252. [ 0.352385@3] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
  1253. [ 0.384481@4] CPU4: update cpu_capacity 1192
  1254. [ 0.384485@4] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
  1255. [ 0.416572@5] CPU5: update cpu_capacity 1192
  1256. [ 0.416576@5] CPU5: thread -1, cpu 3, socket 1, mpidr 80000103
  1257. [ 0.416684@0] Brought up 6 CPUs
  1258. [ 0.464834@0] SMP: Total of 6 processors activated (288.00 BogoMIPS).
  1259. [ 0.471318@0] CPU: All CPU(s) started in SVC mode.
  1260. [ 0.477569@3] addr:bc061cce is in kernel, size fix 4096->10, data:mode=0755
  1261. [ 0.483300@3] devtmpfs: initialized
  1262. [ 0.510296@3] VFP support v0.3: implementor 41 architecture 3 part 40 variant 9 rev 0
  1263. [ 0.512788@3] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  1264. [ 0.522503@3] futex hash table entries: 2048 (order: 5, 131072 bytes)
  1265. [ 0.529141@3] pinctrl core: initialized pinctrl subsystem
  1266. [ 0.535386@3] NET: Registered protocol family 16
  1267. [ 0.542487@3] DMA: preallocated 256 KiB pool for atomic coherent allocations
  1268. [ 0.546118@3] schedtune: init normalization constants...
  1269. [ 0.551461@3] schedtune: CLUSTER[0-1] min_pwr: 0 max_pwr: 42
  1270. [ 0.558189@3] schedtune: CPU[0] min_pwr: 0 max_pwr: 279
  1271. [ 0.564923@3] schedtune: CPU[1] min_pwr: 0 max_pwr: 279
  1272. [ 0.571660@3] schedtune: CLUSTER[2-5] min_pwr: 0 max_pwr: 110
  1273. [ 0.578397@3] schedtune: CPU[2] min_pwr: 0 max_pwr: 1048
  1274. [ 0.585135@3] schedtune: CPU[3] min_pwr: 0 max_pwr: 1048
  1275. [ 0.591871@3] schedtune: CPU[4] min_pwr: 0 max_pwr: 1048
  1276. [ 0.598614@3] schedtune: CPU[5] min_pwr: 0 max_pwr: 1048
  1277. [ 0.605363@3] schedtune: SYSTEM min_pwr: 0 max_pwr: 4902
  1278. [ 0.612089@3] schedtune: using normalization constants mul: 2882587190 sh1: 1 sh2: 12
  1279. [ 0.619967@3] schedtune: verify normalization constants...
  1280. [ 0.625475@3] schedtune: max_pwr/2^0: 4902 => norm_pwr: 1024
  1281. [ 0.631254@3] schedtune: max_pwr/2^1: 2451 => norm_pwr: 512
  1282. [ 0.637024@3] schedtune: max_pwr/2^2: 1225 => norm_pwr: 255
  1283. [ 0.642804@3] schedtune: max_pwr/2^3: 612 => norm_pwr: 127
  1284. [ 0.648574@3] schedtune: max_pwr/2^4: 306 => norm_pwr: 63
  1285. [ 0.654353@3] schedtune: max_pwr/2^5: 153 => norm_pwr: 31
  1286. [ 0.660124@3] schedtune: configured to support 5 boost groups
  1287. [ 0.681956@0] cpuidle: using governor menu
  1288. [ 0.682091@0] register canvas platform driver
  1289. [ 0.684841@0] register rdma platform driver
  1290. [ 0.693747@0] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1291. [ 0.697216@0] hw-breakpoint: maximum watchpoint size is 8 bytes.
  1292. [ 0.703648@5] clkmsr: clkmsr: driver init
  1293. [ 0.707280@5] codec_mm_module_init
  1294. [ 0.710718@5] media_configs_system_init
  1295. [ 0.714847@5] aml_watch_point_probe, in, wp:4
  1296. [ 0.719538@5] pstore: using zlib compression
  1297. [ 0.723792@5] console [pstore-1] enabled
  1298. [ 0.727151@5] pstore: Registered ramoops as persistent store backend
  1299. [ 0.733528@5] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  1300. [ 0.739219@5] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000[ 0.747858@5] aml_iomap: amlogic iomap probe done
  1301. [ 0.750720@5] vpu: driver version: v20190329(8-g12b)
  1302. [ 0.755141@5] vpu: load vpu_clk: 666666667Hz(7)
  1303. [ 0.759877@5] vpu: clktree_init
  1304. [ 0.762884@5] vpu: vpu_probe OK
  1305. [ 0.771955@0] clkmsr: msr_clk_reg0=f09bc004,msr_clk_reg2=f09be00c
  1306. [ 0.772421@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
  1307. [ 0.782792@0] audio_clocks: audio_clocks_probe done
  1308. [ 0.789096@0] aml_vdac_config_probe: cpu_id:4, name:meson-g12ab-vdac
  1309. [ 0.790678@0] aml_vdac_probe: ok
  1310. [ 0.793920@0] canvas_probe reg=ff638000,size=2000
  1311. [ 0.798436@0] canvas maped reg_base =f09c2000
  1312. [ 0.813388@0] rdma_probe,cpu_type:0, ver:0, len:8
  1313. [ 0.813682@0] rdma_register, rdma_table_addr f09e5000 rdma_table_addr_phy 47440000 reg_buf ee2b0000
  1314. [ 0.821609@0] rdma_register success, handle 1 table_size 32768
  1315. [ 0.827434@0] set_rdma_handle video rdma handle = 1.
  1316. [ 0.832443@0] classs created ok
  1317. [ 0.835554@0] classs file created ok
  1318. [ 0.840729@0] aml_snd_reg_map[0], reg:ff640000, size:2000
  1319. [ 0.844605@0] aml_snd_reg_map[1], reg:ff642000, size:2000
  1320. [ 0.850018@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
  1321. [ 0.855439@0] aml_snd_reg_map[3], reg:ff656000, size:1800
  1322. [ 0.860869@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  1323. [ 0.866284@0] amlogic auge_snd_iomap probe done
  1324. [ 0.874017@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12b-cvbsout
  1325. [ 0.877650@0] cvbs_out: find performance_pal config
  1326. [ 0.882392@0] cvbs_out: clk path:0x0
  1327. [ 0.885946@0] vout: vout1: register server: cvbs_vout_server
  1328. [ 0.891662@0] cvbs_out: register cvbs module server ok
  1329. [ 0.896813@0] vout: vout2: register server: cvbs_vout2_server
  1330. [ 0.902595@0] cvbs_out: register cvbs module vout2 server ok
  1331. [ 0.908278@0] cvbs_out: chrdev devno 264241152 for disp
  1332. [ 0.913757@0] cvbs_out: create cdev cvbs
  1333. [ 0.917454@0] cvbs_out: cvbsout_probe OK
  1334. [ 0.922068@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  1335. [ 0.929051@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  1336. [ 0.936454@0] codec_mm_probe ok
  1337. [ 1.191638@0] vgaarb: loaded
  1338. [ 1.192057@0] khadas_hwver_probe
  1339. [ 1.192485@0] SCSI subsystem initialized
  1340. [ 1.196918@0] usbcore: registered new interface driver usbfs
  1341. [ 1.201835@0] usbcore: registered new interface driver hub
  1342. [ 1.207472@2] usbcore: registered new device driver usb
  1343. [ 1.212694@2] Linux video capture interface: v2.00
  1344. [ 1.217525@2] pps_core: LinuxPPS API ver. 1 registered
  1345. [ 1.222483@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1346. [ 1.231909@2] PTP clock support registered
  1347. [ 1.236825@0] secmon: reserve_mem_size:0x300000
  1348. [ 1.240653@0] secmon secmon: assigned reserved memory node linux,secmon
  1349. [ 1.247476@0] secmon: get page:ef197000, 5000
  1350. [ 1.251535@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
  1351. [ 1.258529@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  1352. [ 1.267727@0] fb: osd_init_module
  1353. [ 1.268911@0] fb: viu vsync irq: 59
  1354. [ 1.271869@0] fb: viu2 vsync irq: 68
  1355. [ 1.275501@0] 0x000000c0:Y=c0,U=0,V=0
  1356. [ 1.279095@0] 0x000000c1:Y=c1,U=0,V=0
  1357. [ 1.282748@0] 0x000000c2:Y=c2,U=0,V=0
  1358. [ 1.286443@0] 0x000000c3:Y=c3,U=0,V=0
  1359. [ 1.290098@0] 0x000000c4:Y=c4,U=0,V=0
  1360. [ 1.293797@0] 0x000000c5:Y=c5,U=0,V=0
  1361. [ 1.297962@0] fb: osd_rdma_enable: rdma_table p=0x47448000,op=0x47448000 , v=0xf0ad3000
  1362. [ 1.305568@0] rdma_register, rdma_table_addr f0ad5000 rdma_table_addr_phy 47449000 reg_buf eea3d000
  1363. [ 1.314646@0] rdma_register success, handle 2 table_size 4096
  1364. [ 1.320399@0] fb: osd_rdma_enable:osd rdma handle = 2.
  1365. [ 1.325567@0] fb: mem_size: 0x800000
  1366. [ 1.329123@0] fb: mem_size: 0x2000000
  1367. [ 1.332815@0] fb: mem_size: 0x100000
  1368. [ 1.336385@0] fb: mem_size: 0x100000
  1369. [ 1.339999@0] fb: mem_size: 0x800000
  1370. [ 1.343636@0] fb: failed to init reserved memory
  1371. [ 1.348226@0] vout: error: invalid vinfo1. current vmode is not supported
  1372. [ 1.355085@5] nativeui_propname:enable
  1373. [ 1.358875@5] fb_var_set_process
  1374. [ 1.362285@5] not recovery mode set
  1375. [ 1.365922@5] fb_def_var_set
  1376. [ 1.368848@5] fb: init fbdev bpp is:32
  1377. [ 1.374506@0] fb: set osd0 reverse as NONE
  1378. [ 1.376784@0] vout: error: invalid vinfo1. current vmode is not supported
  1379. [ 1.391629@0] fb: osd probe OK
  1380. [ 1.392603@0] hdmitx: system: Ver: 20190815
  1381. [ 1.393354@0] hdmitx: system: hpd irq = 52
  1382. [ 1.398119@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  1383. [ 1.402536@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  1384. [ 1.407685@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  1385. [ 1.412868@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  1386. [ 1.418002@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  1387. [ 1.423162@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  1388. [ 1.428336@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  1389. [ 1.433489@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  1390. [ 1.438650@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  1391. [ 1.443827@0] hdmitx: hw: alread display in uboot 0x18
  1392. [ 1.448997@0] hdmitx: hw: avmute set to 1
  1393. [ 1.453001@0] vout: vout1: register server: hdmitx_vout_server
  1394. [ 1.458869@0] vout: vout2: register server: hdmitx_vout2_server
  1395. [ 1.465664@0] hdmitx: system: fmt_attr 422,12bit
  1396. [ 1.470481@5] vout: create vout attribute OK
  1397. [ 1.473963@5] vout: aml_vout_probe OK
  1398. [ 1.477393@5] vout: vout1: register server: nulldisp_vout_server
  1399. [ 1.483550@5] vout: tvout monitor interval:500(ms), timeout cnt:20
  1400. [ 1.489696@5] hdmitx: hdmitx_set_current_vmode[4728]
  1401. [ 1.494643@5] hdmitx: system: recalc before 1920x1200p60hz 60 1
  1402. [ 1.500599@5] hdmitx: system: recalc after 1920x1200p60hz 2997 50
  1403. [ 1.506715@5] hdmitx: alread display in uboot
  1404. [ 1.511097@5] vout: init mode 1920x1200p60hz set ok
  1405. [ 1.515997@5] vout: aml_vout_probe
  1406. [ 1.519407@5] vout: aml_vout_probe OK
  1407. [ 1.523777@5] chip type:0x29
  1408. [ 1.526294@5] MEMORY:[0+78000000]
  1409. [ 1.529305@5] ramdump_probe, storage device:data
  1410. [ 1.533936@5] NO valid ramdump args:0 0
  1411. [ 1.537779@5] ramdump_probe, set sticky to 8780
  1412. [ 1.542701@5] Advanced Linux Sound Architecture Driver Initialized.
  1413. [ 1.551576@3] Bluetooth: Core ver 2.22
  1414. [ 1.552418@3] NET: Registered protocol family 31
  1415. [ 1.557043@3] Bluetooth: HCI device and connection manager initialized
  1416. [ 1.563604@3] Bluetooth: HCI socket layer initialized
  1417. [ 1.568682@3] Bluetooth: L2CAP socket layer initialized
  1418. [ 1.573972@3] Bluetooth: SCO socket layer initialized
  1419. [ 1.579484@2] NetLabel: Initializing
  1420. [ 1.582590@2] NetLabel: domain hash size = 128
  1421. [ 1.587131@2] NetLabel: protocols = UNLABELED CIPSOv4
  1422. [ 1.592338@2] NetLabel: unlabeled traffic allowed by default
  1423. [ 1.597856@4] hdmitx: edid: EDID Parser:
  1424. [ 1.597871@4] [RX]-up_phy_addr = 1
  1425. [ 1.597883@4] hdmitx: edid: get dtd0 vic: 16
  1426. [ 1.597889@4] hdmitx: edid: find IEEEOUT
  1427. [ 1.597938@4] hdmitx: edid: blk0 raw data
  1428. [ 1.597986@4] hdmitx: edid:
  1429. [ 1.597986@4] 00ffffffffffff004a8b3b2a01010101241b010380342078ea1ec5ae4f34b126
  1430. [ 1.597986@4] 0e50542108008180a940d1c0714f0101010101010101283c80a070b023403020
  1431. [ 1.597986@4] 3600132b2100001e000000ff004a3235374d3936423030464c0a000000fc0048
  1432. [ 1.597986@4] 444d492d31323030502d4848000000fd003c4c1e5111000a2020202020200170
  1433. [ 1.597986@4]
  1434. [ 1.597986@4]
  1435. [ 1.597989@4] hdmitx: edid: blk1 raw data
  1436. [ 1.598018@4] hdmitx: edid:
  1437. [ 1.598018@4] 020329f15090050403020716011f121314201511062309070767030c00100038
  1438. [ 1.598018@4] 2d83010000e3050301023a801871382d40582c450006442100001e011d801871
  1439. [ 1.598018@4] 1c1620582c250006442100009e011d007251d01e206e28550006442100001e8c
  1440. [ 1.598018@4] 0ad08a20e02d10103e960006442100001800000000000000000000000000003e
  1441. [ 1.598018@4]
  1442. [ 1.598018@4]
  1443. [ 1.598023@4] hdmitx: system: update rx hdr info 0
  1444. [ 1.598415@4] hdmitx: hdmitx: get vic 0 cscd 422,12bit
  1445. [ 1.598420@4] hdmitx: hdmitx: mode name null
  1446. [ 1.598438@4] hdmitx: hdmitx: tmds clock 0
  1447. [ 1.598440@4] hdmitx: hdmitx: act clock: 0
  1448. [ 1.598506@0] hdmitx: system: irq 80000002 0
  1449. [ 1.693424@5] clear:2b400000, free:2b400000, tick:141925 us
  1450. [ 1.729862@0] clocksource: Switched to clocksource arch_sys_counter
  1451. [ 1.806225@0] VFS: Disk quotas dquot_6.6.0
  1452. [ 1.806314@0] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1453. [ 1.826787@0] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  1454. [ 1.827512@0] NET: Registered protocol family 2
  1455. [ 1.831620@0] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  1456. [ 1.838282@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  1457. [ 1.844984@0] TCP: Hash tables configured (established 8192 bind 8192)
  1458. [ 1.851474@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1459. [ 1.857586@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1460. [ 1.864267@0] NET: Registered protocol family 1
  1461. [ 1.871126@0] wifi: power_on_pin_OD = 0;
  1462. [ 1.872594@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  1463. [ 1.878613@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  1464. [ 1.885212@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  1465. [ 1.891869@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  1466. [ 1.898062@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem(): 100.10.545.3
  1467. [ 1.906354@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  1468. [ 1.912259@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  1469. [ 1.918183@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  1470. [ 1.925208@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  1471. [ 1.931046@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  1472. [ 1.937088@0] aml_wifi wifi: [wifi_dev_probe] wifi_setup_dt
  1473. [ 1.942530@0] aml_wifi wifi: [wifi_dev_probe] irq num is:(86)
  1474. [ 1.948204@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin(483)
  1475. [ 1.954244@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin(482)
  1476. [ 1.967560@0] enable_pmuserenr_all() start
  1477. [ 1.967600@0] enable_pmuserenr_all() end
  1478. [ 1.969993@0] hw perfevents: clusterb_enabled = 1
  1479. [ 1.974714@0] hw perfevents: cpumasks 0x3, 0x3c
  1480. [ 1.979282@0] hw perfevents: cluster A irq = 25
  1481. [ 1.983828@0] hw perfevents: cluster B irq = 26
  1482. [ 1.988419@0] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  1483. [ 2.001437@5] audit: initializing netlink subsys (disabled)
  1484. [ 2.002424@5] audit: type=2000 audit(1.744:1): initialized
  1485. [ 2.009165@5] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  1486. [ 2.022848@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1487. [ 2.023474@2] exFAT: Version 1.2.9
  1488. [ 2.027747@5] Registering sdcardfs 0.1
  1489. [ 2.030623@5] ntfs: driver 2.1.32 [Flags: R/O].
  1490. [ 2.035249@5] jffs2: version 2.2. (NAND) (SUMMARY) � 2001-2006 Red Hat, Inc.
  1491. [ 2.042972@2] fuse init (API version 7.26)
  1492. [ 2.053170@3] NET: Registered protocol family 38
  1493. [ 2.053203@3] Key type asymmetric registered
  1494. [ 2.056467@3] Asymmetric key parser 'x509' registered
  1495. [ 2.061674@3] bounce: pool size: 64 pages
  1496. [ 2.065771@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  1497. [ 2.073155@3] io scheduler noop registered (default)
  1498. [ 2.078202@3] io scheduler deadline registered
  1499. [ 2.082624@3] io scheduler cfq registered
  1500. [ 2.100069@2] random: fast init done
  1501. [ 2.100134@2] random: crng init done
  1502. [ 2.110037@0] hdmitx: system: plugin
  1503. [ 2.118370@4] brd: module loaded
  1504. [ 2.145045@4] loop: module loaded
  1505. [ 2.145997@4] zram: Added device: zram0
  1506. [ 2.146672@4] mcu_probe
  1507. [ 2.149001@4] mcu_parse_dt hwver:50
  1508. [ 2.153538@4] mcu version is 3
  1509. [ 2.157261@4] mcu_probe
  1510. [ 2.158139@4] mcu_probe,wol enable=0
  1511. [ 2.164093@5] mtdoops: mtd device (mtddev=name/number) must be supplied
  1512. [ 2.169131@5] libphy: Fixed MDIO Bus: probed
  1513. [ 2.172879@5] tun: Universal TUN/TAP device driver, 1.6
  1514. [ 2.177836@5] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1515. [ 2.184986@3] REG0:Addr = f0cf9540
  1516. [ 2.187711@3] ee eth reset:Addr = f0cfb008
  1517. [ 2.191972@3] auto_cali_idx 40
  1518. [ 2.195354@2] meson6-dwmac ff3f0000.ethernet: no reset control found
  1519. [ 2.201340@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
  1520. [ 2.206588@2] Ring mode enabled
  1521. [ 2.209810@2] DMA HW capability register supported[ 2.214556@2] Normal descriptors
  1522. [ 2.217892@2] RX Checksum Offload Engine supported
  1523. [ 2.222772@2] COE Type 2
  1524. [ 2.225384@2] TX Checksum insertion supported
  1525. [ 2.229858@2] Wake-Up On Lan supported
  1526. [ 2.233752@2] Enable RX Mitigation via HW Watchdog Timer
  1527. [ 2.242183@0] hdmitx: edid: EDID Parser:
  1528. [ 2.242307@3] libphy: stmmac: probed
  1529. [ 2.242313@3] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  1530. [ 2.242316@3] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  1531. [ 2.243588@3] PPP generic driver version 2.4.2
  1532. [ 2.243766@5] PPP BSD Compression module registered
  1533. [ 2.243769@5] PPP Deflate Compression module registered
  1534. [ 2.243787@5] PPP MPPE Compression module registered
  1535. [ 2.243791@5] NET: Registered protocol family 24
  1536. [ 2.243892@5] usbcore: registered new interface driver rtl8150
  1537. [ 2.243947@5] usbcore: registered new interface driver r8152
  1538. [ 2.243995@5] usbcore: registered new interface driver lan78xx
  1539. [ 2.244050@5] usbcore: registered new interface driver asix
  1540. [ 2.244103@5] usbcore: registered new interface driver ax88179_178a
  1541. [ 2.244152@5] usbcore: registered new interface driver cdc_ether
  1542. [ 2.244195@5] usbcore: registered new interface driver dm9601
  1543. [ 2.244240@5] usbcore: registered new interface driver sr9700
  1544. [ 2.244303@5] usbcore: registered new interface driver CoreChips
  1545. [ 2.244357@5] usbcore: registered new interface driver smsc75xx
  1546. [ 2.244411@5] usbcore: registered new interface driver smsc95xx
  1547. [ 2.244459@5] usbcore: registered new interface driver net1080
  1548. [ 2.244503@5] usbcore: registered new interface driver cdc_subset
  1549. [ 2.244550@5] usbcore: registered new interface driver zaurus
  1550. [ 2.244618@5] usbcore: registered new interface driver cdc_ncm
  1551. [ 2.244639@5] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.1
  1552. [ 2.244695@5] usbcore: registered new interface driver GobiNet
  1553. [ 2.245250@5] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1554. [ 2.245253@5] ehci-pci: EHCI PCI platform driver
  1555. [ 2.245302@5] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1556. [ 2.245319@5] ohci-pci: OHCI PCI platform driver
  1557. [ 2.245818@5] usbcore: registered new interface driver cdc_acm
  1558. [ 2.245820@5] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1559. [ 2.245913@5] usbcore: registered new interface driver usb-storage
  1560. [ 2.246004@5] usbcore: registered new interface driver usbserial
  1561. [ 2.246042@5] usbcore: registered new interface driver option
  1562. [ 2.246077@5] usbserial: USB Serial support registered for GSM modem (1-port)
  1563. [ 2.246421@2] mousedev: PS/2 mouse device common for all mice
  1564. [ 2.246647@2] usbcore: registered new interface driver xpad
  1565. [ 2.246704@2] edt_ft5x06 3-0038: probing for EDT FT5x06 I2C
  1566. [ 2.462807@0] [RX]-up_phy_addr = 1
  1567. [ 2.466210@0] hdmitx: edid: get dtd0 vic: 16
  1568. [ 2.470490@0] hdmitx: edid: find IEEEOUT
  1569. [ 2.474469@0] hdmitx: edid: blk0 raw data
  1570. [ 2.478487@0] hdmitx: edid:
  1571. [ 2.478487@0] 00ffffffffffff004a8b3b2a01010101241b010380342078ea1ec5ae4f34b126
  1572. [ 2.478487@0] 0e50542108008180a940d1c0714f0101010101010101283c80a070b023403020
  1573. [ 2.478487@0] 3600132b2100001e000000ff004a3235374d3936423030464c0a000000fc0048
  1574. [ 2.478487@0] 444d492d31323030502d4848000000fd003c4c1e5111000a2020202020200170
  1575. [ 2.478487@0]
  1576. [ 2.478487@0]
  1577. [ 2.513734@0] hdmitx: edid: blk1 raw data
  1578. [ 2.517772@0] hdmitx: edid:
  1579. [ 2.517772@0] 020329f15090050403020716011f121314201511062309070767030c00100038
  1580. [ 2.517772@0] 2d83010000e3050301023a801871382d40582c450006442100001e011d801871
  1581. [ 2.517772@0] 1c1620582c250006442100009e011d007251d01e206e28550006442100001e8c
  1582. [ 2.517772@0] 0ad08a20e02d10103e960006442100001800000000000000000000000000003e
  1583. [ 2.517772@0]
  1584. [ 2.517772@0]
  1585. [ 2.553016@0] hdmitx: system: update physcial size: 520 320
  1586. [ 2.558611@0] hdmitx: hw: set audio
  1587. [ 2.562105@0] hdmitx: hw: hdmitx tx_aud_src = 0
  1588. [ 2.566662@0] hdmitx: fs = 0, cd = 4, tmds_clk = 193250
  1589. [ 2.571914@0] hdmitx: hw: aud_n_para = 6144
  1590. [ 2.576107@0] hdmitx: hw: set channel status
  1591. [ 2.580400@0] hdmitx: hw: [0x10e3] = 0xf
  1592. [ 2.622862@0] edt_ft5x06 3-0038: touchscreen probe failed
  1593. [ 2.623031@0] sensor_register_slave:kxtj3,id=0
  1594. [ 2.637018@0] khadas-rtc 4-0051: rtc core: registered khadas-rtc as rtc0
  1595. [ 2.638195@0] i2c /dev entries driver
  1596. [ 2.642678@0] IR NEC protocol handler initialized
  1597. [ 2.646527@0] IR RC5(x/sz) protocol handler initialized
  1598. [ 2.651840@0] IR RC6 protocol handler initialized
  1599. [ 2.656548@0] IR JVC protocol handler initialized
  1600. [ 2.661221@0] IR Sony protocol handler initialized
  1601. [ 2.666056@2] IR SANYO protocol handler initialized
  1602. [ 2.670945@2] IR Sharp protocol handler initialized
  1603. [ 2.675816@2] IR MCE Keyboard/mouse protocol handler initialized
  1604. [ 2.681866@2] IR XMP protocol handler initialized
  1605. [ 2.686667@2] usbcore: registered new interface driver uvcvideo
  1606. [ 2.692531@2] USB Video Class driver (1.1.1)
  1607. [ 2.696869@2] usbcore: registered new interface driver cx231xx
  1608. [ 2.702680@2] md: linear personality registered for level -1
  1609. [ 2.708897@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  1610. [ 2.717218@2] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
  1611. [ 2.725438@2] Bluetooth: HCI UART driver ver 2.3
  1612. [ 2.730073@2] Bluetooth: HCI UART protocol H4 registered
  1613. [ 2.737242@1] ledtrig-cpu: registered to indicate activity on CPUs
  1614. [ 2.742258@1] hidraw: raw HID events driver (C) Jiri Kosina
  1615. [ 2.747959@4] usbcore: registered new interface driver usbhid
  1616. [ 2.753002@4] usbhid: USB HID core driver
  1617. [ 2.757248@0] ashmem: initialized
  1618. [ 2.761671@0] meson_cpufreq_init: ignor dsu clk!
  1619. [ 2.765024@0] meson_cpufreq_init: ignor dsu pre parent clk!
  1620. [ 2.770671@0] value of voltage_tolerance 0
  1621. [ 2.774712@0] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
  1622. [ 2.781255@0] value of gp1_clk_target 0
  1623. [ 2.786098@0] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  1624. [ 2.792335@0] meson_cpufreq_init: ignor dsu clk!
  1625. [ 2.795527@0] meson_cpufreq_init: ignor dsu pre parent clk!
  1626. [ 2.801187@0] value of voltage_tolerance 0
  1627. [ 2.805250@0] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
  1628. [ 2.811786@0] value of gp1_clk_target 0
  1629. [ 2.816590@0] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
  1630. [ 2.822887@0] ff803000.serial: clock gate not found
  1631. [ 2.826360@0] meson_uart ff803000.serial: ==uart0 reg addr = f0ea5000
  1632. [ 2.832823@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 40, base_baud = 1500000) is a meson_uart
  1633. [ 2.847825@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  1634. [ 2.850498@0] console [ttyS0] enabled
  1635. [ 2.850498@0] console [ttyS0] enabled
  1636. [ 2.857751@0] bootconsole [aml-uart0] disabled
  1637. [ 2.857751@0] bootconsole [aml-uart0] disabled
  1638. [ 2.867094@0] meson_uart ffd24000.serial: ==uart1 reg addr = f0ea7000
  1639. [ 2.873062@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 50, base_baud = 1500000) is a meson_uart
  1640. [ 2.882800@0] meson_uart ffd22000.serial: ==uart3 reg addr = f0ea9000
  1641. [ 2.888835@0] ffd22000.serial: ttyS3 at MMIO 0xffd22000 (irq = 51, base_baud = 1500000) is a meson_uart
  1642. [ 2.899469@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xf0eab000
  1643. [ 2.908665@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xf0ee9080
  1644. [ 2.919317@2] Error: Driver 'meson_reset' is already registered, aborting...
  1645. [ 2.925797@2] aml_dma ff63e000.aml_dma: Aml dma
  1646. [ 2.930869@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  1647. [ 2.936381@0] aml_tdes_dma ff63e000.aml_dma:aml_tdes: Aml TDES_dma
  1648. [ 2.942720@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  1649. [ 2.949714@0] gpio-keypad gpio_keypad: power key(116) registed.
  1650. [ 2.955263@0] input: gpio_keypad as /devices/platform/gpio_keypad/input/input1
  1651. [ 2.962547@0] meson-remote: Driver init
  1652. [ 2.966262@0] meson-remote: remote_probe
  1653. [ 2.970018@0] meson-remote ff808040.rc: protocol = 0x1
  1654. [ 2.975096@0] meson-remote ff808040.rc: don't find the node <led_blink>
  1655. [ 2.981681@0] meson-remote ff808040.rc: led_blink = 0
  1656. [ 2.986751@2] meson-remote ff808040.rc: don't find the node <led_blink_frq>
  1657. [ 2.993637@2] meson-remote ff808040.rc: led_blink_frq = 100
  1658. [ 2.999278@2] meson-remote ff808040.rc: platform_data irq =49
  1659. [ 3.005011@2] meson-remote ff808040.rc: custom_number = 1
  1660. [ 3.010364@2] meson-remote ff808040.rc: ptable->map_size = 13
  1661. [ 3.016078@2] meson-remote ff808040.rc: ptable->custom_name = khadas-ir
  1662. [ 3.022668@2] meson-remote ff808040.rc: ptable->custom_code = 0xff00
  1663. [ 3.028988@2] meson-remote ff808040.rc: ptable->release_delay = 80
  1664. [ 3.035146@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
  1665. [ 3.041904@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
  1666. [ 3.047708@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
  1667. [ 3.053513@2] meson-remote ff808040.rc: reg=0x8, val=0x960050
  1668. [ 3.059233@2] meson-remote ff808040.rc: reg=0xc, val=0x480028
  1669. [ 3.064955@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
  1670. [ 3.070936@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800
  1671. [ 3.076827@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
  1672. [ 3.082460@2] meson-remote ff808040.rc: reg=0x20, val=0x0
  1673. [ 3.087835@2] meson-remote ff808040.rc: reg=0x24, val=0x0
  1674. [ 3.093207@2] meson-remote ff808040.rc: reg=0x28, val=0x0
  1675. [ 3.098995@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input2
  1676. [ 3.106235@1] meson-remote: IR XMP protocol handler initialized
  1677. [ 3.111888@2] efuse efuse: open efuse clk gate error!!
  1678. [ 3.116817@2] efusekeynum: 1
  1679. [ 3.119658@2] efusekeyname: macoffset: 0size: 12
  1680. [ 3.126173@0] efuse efuse: probe OK!
  1681. [ 3.132084@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  1682. [ 3.137319@1] ge2d: ge2d_init_module
  1683. [ 3.140975@1] ge2d: ge2d clock is 499 MHZ
  1684. [ 3.144389@1] ge2d: reserved mem is not used
  1685. [ 3.148645@1] ge2d: ge2d start monitor
  1686. [ 3.152813@2] [tsync_pcr_init]init success.
  1687. [ 3.156623@2] amvideom vsync irq: 59
  1688. [ 3.160069@2] create_ge2d_work_queue video task ok
  1689. [ 3.165399@0] hdmitx: hdcp: hdmitx_hdcp_init
  1690. [ 3.169717@5] vout: vout2: create vout2 attribute OK
  1691. [ 3.174105@0] vout: vout2: aml_vout2_probe OK
  1692. [ 3.178483@0] vout: vout2: clktree_init
  1693. [ 3.182137@0] vout: vout2: register server: nulldisp_vout2_server
  1694. [ 3.188391@0] vout: vout2: init mode null set ok
  1695. [ 3.192806@0] vout: vout2: aml_vout2_probe OK
  1696. [ 3.197267@0] DI: di_module_init ok.
  1697. [ 3.200873@0] DI: di_probe:
  1698. [ 3.203532@0] DI: di_probe: major 509
  1699. [ 3.207316@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  1700. [ 3.214556@0] di:flag_cma=1
  1701. [ 3.217309@0] DI: CMA size 0x2800000.
  1702. [ 3.221032@0] pre_irq:83
  1703. [ 3.223482@0] post_irq:84
  1704. [ 3.226086@0] DI: di_probe allocate rdma channel 0.
  1705. [ 3.230933@0] di_probe: get clk vpu error.
  1706. [ 3.235049@2] DI: vpu clkb <334000000, 667000000>
  1707. [ 3.239712@2] get clkb rate:333333328
  1708. [ 3.243329@2] DI:enable vpu clkb.
  1709. [ 3.246617@2] 0x000000c9:Y=c9,U=0,V=0
  1710. [ 3.250247@2] 0x000000ca:Y=ca,U=0,V=0
  1711. [ 3.253888@2] 0x000000cb:Y=cb,U=0,V=0
  1712. [ 3.257521@2] 0x000000cc:Y=cc,U=0,V=0
  1713. [ 3.261167@2] 0x000000cd:Y=cd,U=0,V=0
  1714. [ 3.264807@2] 0x000000ce:Y=ce,U=0,V=0
  1715. [ 3.268445@2] 0x000000cf:Y=cf,U=0,V=0
  1716. [ 3.272088@2] 0x000000d0:Y=d0,U=0,V=0
  1717. [ 3.275725@2] 0x000000d1:Y=d1,U=0,V=0
  1718. [ 3.279368@2] 0x000000d2:Y=d2,U=0,V=0
  1719. [ 3.283009@2] 0x000000d3:Y=d3,U=0,V=0
  1720. [ 3.286647@2] 0x000000d4:Y=d4,U=0,V=0
  1721. [ 3.290286@2] 0x000000d5:Y=d5,U=0,V=0
  1722. [ 3.293926@2] 0x000000d6:Y=d6,U=0,V=0
  1723. [ 3.297561@2] 0x000000d7:Y=d7,U=0,V=0
  1724. [ 3.301206@2] 0x000000d8:Y=d8,U=0,V=0
  1725. [ 3.304851@2] 0x000000d9:Y=d9,U=0,V=0
  1726. [ 3.308486@2] 0x000000da:Y=da,U=0,V=0
  1727. [ 3.312126@2] 0x000000db:Y=db,U=0,V=0
  1728. [ 3.315766@2] 0x000000dc:Y=dc,U=0,V=0
  1729. [ 3.319407@2] 0x000000dd:Y=dd,U=0,V=0
  1730. [ 3.323045@2] 0x000000de:Y=de,U=0,V=0
  1731. [ 3.326689@2] 0x000000df:Y=df,U=0,V=0
  1732. [ 3.330326@2] 0x000000e0:Y=e0,U=0,V=0
  1733. [ 3.333966@2] 0x000000e1:Y=e1,U=0,V=0
  1734. [ 3.337601@2] DI: support multi decoding 223~224~225.
  1735. [ 3.342753@2] DI: di_probe:Di use HRTIMER
  1736. [ 3.346710@3] DI: di_probe:ok
  1737. [ 3.349615@3] dim:dim_module_init
  1738. [ 3.353039@3] dim:dim_module_init finish
  1739. [ 3.356765@3] dil:dil_init.
  1740. [ 3.359635@3] dil:dil_init ok.
  1741. [ 3.362590@3] vdin_drv_init: major 508
  1742. [ 3.366467@3] rdma_register, rdma_table_addr f0efd000 rdma_table_addr_phy 4744a000 reg_buf ed5cac00
  1743. [ 3.375317@3] rdma_register success, handle 3 table_size 512
  1744. [ 3.380949@3] vdin_drv_probe:vdin.0 rdma hanld 3.
  1745. [ 3.385828@4] vdin vdin0: assigned reserved memory node linux,vdin0_cma
  1746. [ 3.392216@4]
  1747. [ 3.392216@4] vdin memory resource done.
  1748. [ 3.397849@4] vdin0 cma_mem_size = 64 MB
  1749. [ 3.401735@4] vdin0 irq: 56 rdma irq: 2
  1750. [ 3.405555@4] set_canvas_manual = 0
  1751. [ 3.409041@4] get fclk_div5 err
  1752. [ 3.412145@4] vdin_drv_probe: vdin cannot get msr clk !!!
  1753. [ 3.417538@4] vdin_drv_probe: driver initialized ok
  1754. [ 3.422425@4] rdma_register, rdma_table_addr f1001000 rdma_table_addr_phy 4744b000 reg_buf edd9b600
  1755. [ 3.431388@4] rdma_register success, handle 4 table_size 512
  1756. [ 3.437019@4] vdin_drv_probe:vdin.1 rdma hanld 4.
  1757. [ 3.441890@3] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  1758. [ 3.448285@3]
  1759. [ 3.448285@3] vdin memory resource done.
  1760. [ 3.453919@3] vdin1 cma_mem_size = 64 MB
  1761. [ 3.457808@3] vdin1 irq: 57 rdma irq: 4
  1762. [ 3.461636@3] set_canvas_manual = 0
  1763. [ 3.465112@3] get fclk_div5 err
  1764. [ 3.468218@3] vdin_drv_probe: vdin cannot get msr clk !!!
  1765. [ 3.473596@3] vdin_debugfs_init only support debug vdin0 1
  1766. [ 3.479051@3] vdin_drv_probe: driver initialized ok
  1767. [ 3.483967@3] vdin_drv_init: vdin driver init done
  1768. [ 3.488673@3] [viuin..]viuin_init_module viuin module init
  1769. [ 3.494280@3] [viuin..]viuin_probe probe ok.
  1770. [ 3.498663@3] [RX]-hdmirx: hdmirx_init.
  1771. [ 3.502191@3] ESM HLD: Initializing...
  1772. [ 3.506711@0] amvdec_csi module: init.
  1773. [ 3.509650@0] amvdec_csi_init_module:major 506
  1774. [ 3.514259@0] amvdec_csi module: init. ok
  1775. [ 3.518139@0] amlvid:info: amlvideo_init called[ 3.522392@2] amlvid:info: amlvideo_create_instance called
  1776. [ 3.527852@2] amlvid:info: v4l2_dev.name=:amlvideo-000
  1777. [ 3.533076@0] amlvideo-000: V4L2 device registered as video10
  1778. [ 3.538737@0] amlvid:info: amlvideo_create_instance called
  1779. [ 3.544144@0] amlvid:info: v4l2_dev.name=:amlvideo-001
  1780. [ 3.549414@0] amlvideo-001: V4L2 device registered as video23
  1781. [ 3.555241@0] amlvideo2 probe called
  1782. [ 3.558541@0] amlvideo2_create_node[ 3.562029@0] amlvideo2: V4L2 device registered as video11
  1783. [ 3.567381@0] amlvideo2 probe called
  1784. [ 3.570850@0] amlvideo2_create_node[ 3.574317@0] amlvideo2: V4L2 device registered as video12
  1785. [ 3.579653@0] PPMGRDRV: warn: ppmgr module init func called
  1786. [ 3.585390@0] PPMGRDRV: info: ppmgr_driver_probe called
  1787. [ 3.590397@0] PPMGRDRV: info: ppmgr_dev major:505
  1788. [ 3.595292@0] ppmgr: probe of ppmgr failed with error -22
  1789. [ 3.600807@2] ionvideo-000: V4L2 device registered as video13
  1790. [ 3.606202@2] ionvideo-001: V4L2 device registered as video14
  1791. [ 3.611887@2] ionvideo-002: V4L2 device registered as video15
  1792. [ 3.617624@2] ionvideo-003: V4L2 device registered as video16
  1793. [ 3.623371@0] ionvideo-004: V4L2 device registered as video17
  1794. [ 3.629123@0] ionvideo-005: V4L2 device registered as video18
  1795. [ 3.634876@0] ionvideo-006: V4L2 device registered as video19
  1796. [ 3.640541@0] ionvideo-007: V4L2 device registered as video20
  1797. [ 3.646273@0] ionvideo-008: V4L2 device registered as video21
  1798. [ 3.651912@0] ionvid: info: Video Technology Magazine Ion Video
  1799. [ 3.657761@0] ionvid: info: Capture Board ver 1.0 successfully loaded
  1800. [ 3.664436@0] picdec: picdec_driver_probe called.
  1801. [ 3.669222@1] picdec: probe of picdec failed with error -22
  1802. [ 3.674673@1] videosync_create_instance dev_s ecc14800,dev_s->dev ee1d0900
  1803. [ 3.681260@1] videosync_create_instance reg videosync.0
  1804. [ 3.686524@1] aml_vecm_init:module init
  1805. [ 3.686525@2] videosync_thread started
  1806. [ 3.694312@1] VECM probe start
  1807. [ 3.697385@1] vlock_status_init vlock_en:1
  1808. [ 3.701108@1] pixel_probe: vpp probe func error!
  1809. [ 3.705706@1] request amvecm_vsync2_irq successful
  1810. [ 3.710466@1] aml_vecm_probe: ok
  1811. [ 3.713744@1] amdolby_vision_init:module init
  1812. [ 3.715880@0] hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0
  1813. [ 3.724564@1]
  1814. [ 3.724564@1] amdolby_vision probe start & ver: 20181220
  1815. [ 3.731174@1]
  1816. [ 3.731174@1] cpu_id=2 tvmode=0
  1817. [ 3.736203@2] dolby_vision_init_receiver(dvel)
  1818. [ 3.740445@2] dolby_vision_init_receiver: dvel
  1819. [ 3.745012@2] amdolby_vision_probe: ok
  1820. [ 3.748589@2] g12 dovi disable in uboot
  1821. [ 3.752477@2] prime_sl module init
  1822. [ 3.756047@2] reg base = f1037000
  1823. [ 3.759081@2] gdc_platform_probe: reserve_mem is not used
  1824. [ 3.764548@2] gdc_platform_probe: gdc core clk is 799 MHZ
  1825. [ 3.769861@2] gdc_platform_probe: gdc axi clk is 799 MHZ
  1826. [ 3.775140@2] gdc_wq_init: init gdc device
  1827. [ 3.779196@2] gdc_wq_init: gdc start monitor
  1828. [ 3.783483@4] gdc_monitor_thread: gdc workqueue monitor start
  1829. [ 3.783753@5] vm_init .
  1830. [ 3.784309@5] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  1831. [ 3.784916@2] meson-mmc: >>>>>>>>hostbase f103f000, dmode
  1832. [ 3.785076@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1833. [ 3.785086@2] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  1834. [ 3.822770@2] meson-mmc: meson_mmc_probe() : success!
  1835. [ 3.830241@2] meson-mmc: >>>>>>>>hostbase f10c9000, dmode
  1836. [ 3.830279@2] meson-mmc: gpio_cd = 1ca
  1837. [ 3.875111@0] meson-mmc: meson_mmc_probe() : success!
  1838. [ 3.876270@0] meson-mmc: >>>>>>>>hostbase f1153000, dmode
  1839. [ 3.880536@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1840. [ 3.886080@0] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  1841. [ 3.892432@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
  1842. [ 3.892435@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1843. [ 3.892444@0] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
  1844. [ 3.892448@0] meson-mmc: Data 1 aligned delay is 0
  1845. [ 3.892452@0] meson-mmc: emmc: clk 199999997 tuning start
  1846. [ 3.907849@0] meson-mmc: emmc: adj_win: < 1 2 3 4 >
  1847. [ 3.907854@0] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
  1848. [ 3.912926@0] meson-mmc: emmc: adj_win: < 1 2 3 4 >
  1849. [ 3.912930@0] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
  1850. [ 3.916951@0] meson-mmc: emmc: adj_win: < 2 3 4 >
  1851. [ 3.916955@0] meson-mmc: left:3, right:0, mid:4, size:4
  1852. [ 3.916958@0] meson-mmc: step:0, delay1:0x0, delay2:0x0
  1853. [ 3.916962@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  1854. [ 3.916964@0] meson-mmc: delay1:0x0, delay2:0x0
  1855. [ 3.917103@0] emmc: new HS200 MMC card at address 0001
  1856. [ 3.921699@0] emmc: clock 199999997, 8-bit-bus-width
  1857. [ 3.921699@0]
  1858. [ 3.921700@0] mmcblk0: emmc:0001 AJTD4R 14.6 GiB
  1859. [ 3.921901@0] mmcblk0boot0: emmc:0001 AJTD4R partition 1 4.00 MiB
  1860. [ 3.922087@0] mmcblk0boot1: emmc:0001 AJTD4R partition 2 4.00 MiB
  1861. [ 3.922248@0] mmcblk0rpmb: emmc:0001 AJTD4R partition 3 4.00 MiB
  1862. [ 3.923113@0] meson-mmc: Enter aml_emmc_partition_ops
  1863. [ 3.923469@0] meson-mmc: [aml_emmc_partition_ops] mmc read partition OK!
  1864. [ 3.923471@0] meson-mmc: add_emmc_partition
  1865. [ 3.923630@0] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  1866. [ 3.923762@0] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  1867. [ 3.923896@0] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
  1868. [ 3.924019@0] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
  1869. [ 3.924150@0] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
  1870. [ 3.924282@0] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
  1871. [ 3.924405@0] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
  1872. [ 3.924537@0] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
  1873. [ 3.924672@0] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
  1874. [ 3.924805@0] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
  1875. [ 3.924931@0] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
  1876. [ 3.925069@0] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
  1877. [ 3.925212@0] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
  1878. [ 3.925339@0] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
  1879. [ 3.925473@0] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
  1880. [ 3.925599@0] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x00001c000000
  1881. [ 3.925725@0] meson-mmc: [mmcblk0p17] odm offset 0x000079e00000, size 0x000008000000
  1882. [ 3.925886@0] meson-mmc: [mmcblk0p18] system offset 0x000082600000, size 0x000050000000
  1883. [ 3.926020@0] meson-mmc: [mmcblk0p19] product offset 0x0000d2e00000, size 0x000008000000
  1884. [ 3.926155@0] meson-mmc: [mmcblk0p20] data offset 0x0000db600000, size 0x0002c8800000
  1885. [ 3.926170@0] card key: card_blk_probe.
  1886. [ 3.926185@0] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  1887. [ 3.926193@0] emmc key: emmc_key_init:205 ok.
  1888. [ 3.928186@0] meson-mmc: amlmmc_dtb_init: register dtb chardev
  1889. [ 3.928187@0] meson-mmc: calc 3d37f222, store 3d37f222
  1890. [ 3.930040@0] meson-mmc: calc 3d37f222, store 3d37f222
  1891. [ 3.930042@0] meson-mmc: total valid 2
  1892. [ 3.930239@0] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  1893. [ 3.930375@0] meson-mmc: amlmmc_ddr_init: register ddr_parameter chardev
  1894. [ 3.930415@0] meson-mmc: amlmmc_ddr_init: register ddr parameter chardev OK
  1895. [ 3.930416@0] meson-mmc: Exit aml_emmc_partition_ops OK.
  1896. [ 4.309905@0] meson-mmc: meson_mmc_probe() : success!
  1897. [ 4.310226@0] amlogic mtd driver init
  1898. [ 4.313699@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc1
  1899. [ 4.319242@0] input: aml_vkeypad as /devices/platform/rtc/input/input3
  1900. [ 4.326474@5] cectx ff80023c.aocec: cec driver date:2020/04/09:fix cec a recursive call
  1901. [ 4.326474@5]
  1902. [ 4.335329@0] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
  1903. [ 4.341319@0] cectx ff80023c.aocec: cecb_ver:0x1
  1904. [ 4.345925@2] cectx ff80023c.aocec: line_reg:0x1
  1905. [ 4.350504@2] cectx ff80023c.aocec: line_bit:0x3
  1906. [ 4.355101@2] cectx ff80023c.aocec: ee_to_ao:0x1
  1907. [ 4.359766@2] input: cec_input as /devices/virtual/input/input4
  1908. [ 4.365677@0] cectx ff80023c.aocec: not find 'port_num'
  1909. [ 4.370810@2] cectx ff80023c.aocec: using cec:1
  1910. [ 4.375300@2] cectx ff80023c.aocec: no hdmirx regs
  1911. [ 4.380049@2] cectx ff80023c.aocec: no hhi regs
  1912. [ 4.384559@2] cectx ff80023c.aocec: not find 'output'
  1913. [ 4.390831@2] irq cnt:2, a:55, b54
  1914. [ 4.393155@0] cectx ff80023c.aocec: wakeup_reason:0x0
  1915. [ 4.398142@0] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
  1916. [ 4.403589@2] cectx ff80023c.aocec: aml_cec_probe success end
  1917. [ 4.409653@2] unifykey: no efuse-version set, use default value: -1
  1918. [ 4.415752@1] unifykey: aml_unifykeys_init done!
  1919. [ 4.420196@1] meson ts init
  1920. [ 4.422926@1] tsensor id: 0
  1921. [ 4.425733@1] r1p1_tsensor_read valid cnt is 0
  1922. [ 4.430171@1] tsensor trim info: 0xfa0080b5!
  1923. [ 4.434390@1] tsensor hireboot: 0xc0ff2af0
  1924. [ 4.438534@1] meson ts init
  1925. [ 4.441245@1] tsensor id: 1
  1926. [ 4.444138@2] r1p1_tsensor_read valid cnt is 0
  1927. [ 4.448520@2] tsensor trim info: 0xfa00801f!
  1928. [ 4.452769@2] tsensor hireboot: 0xc0ff2a90
  1929. [ 4.456945@2] audio_dsp: [dsp]register dsp to char divece(257)
  1930. [ 4.462764@1] amaudio: amaudio: driver amaudio init!
  1931. [ 4.468015@0] amaudio: amaudio_init - amaudio: driver amaudio succuess!
  1932. [ 4.474875@2] amlkaraoke init success!
  1933. [ 4.478023@2] sysled: module init
  1934. [ 4.481349@2] meson_wdt ffd0f0d0.watchdog: start watchdog
  1935. [ 4.486579@2] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
  1936. [ 4.493589@4] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
  1937. [ 4.500415@0] amlogic rfkill init
  1938. [ 4.503574@0] enter bt_probe of_node
  1939. [ 4.506951@0] not get gpio_en
  1940. [ 4.509909@2] not get gpio_btwakeup
  1941. [ 4.513339@2] power on valid level is high[ 4.517238@2] bt: power_on_pin_OD = 0;
  1942. [ 4.520968@2] bt: power_off_flag = 1;
  1943. [ 4.524624@2] dis power down = 0;
  1944. [ 4.553985@0] request_irq error ret=-22
  1945. [ 4.554045@0] dev_pm_set_wake_irq failed: -22
  1946. [ 4.557173@5] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
  1947. [ 4.564148@5] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
  1948. [ 4.572970@0] dmc_monitor_probe
  1949. [ 4.575114@0] page_trace_module_init, create sysfs failed
  1950. [ 4.581445@0] atv_demod: aml_atvdemod_init: OK, atv demod version: V2.15.
  1951. [ 4.587252@0] defendkey ff630218.defendkey: Reserved memory is not enough!
  1952. [ 4.593885@0] defendkey: probe of ff630218.defendkey failed with error -22
  1953. [ 4.601381@0] usbcore: registered new interface driver snd-usb-audio
  1954. [ 4.608174@0] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
  1955. [ 4.613961@0] T9015 acodec used by auge, tdmout:1
  1956. [ 4.621365@0] asoc debug: aml_audio_controller_probe-129
  1957. [ 4.624476@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
  1958. [ 4.629715@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 1, lane_oe_mask_out = 1
  1959. [ 4.637435@0] snd_tdm ff642000.audiobus:tdma: neither mclk_pad nor mclk2pad set
  1960. [ 4.644806@0] aml_tdm_platform_probe(), share en = 1[ 4.649508@2] No channel mask node Channel_Mask
  1961. [ 4.654138@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
  1962. [ 4.659798@2] TDM id 1 samesource_sel:3
  1963. [ 4.663572@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
  1964. [ 4.671527@2] aml_tdm_platform_probe(), share en = 1[ 4.676125@2] No channel mask node Channel_Mask
  1965. [ 4.680735@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
  1966. [ 4.686453@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 1, lane_oe_mask_out = 0
  1967. [ 4.694348@2] aml_tdm_platform_probe(), share en = 1[ 4.698996@2] No channel mask node Channel_Mask
  1968. [ 4.704197@2] aml_spdif_platform_probe, register soc platform
  1969. [ 4.709620@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 41, frddr 44
  1970. [ 4.717394@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 42, frddr 45
  1971. [ 4.725537@2] audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 43, frddr 46
  1972. [ 4.733868@2] loopback ff642000.audiobus:loopback@0: check whether to update loopback chipinfo
  1973. [ 4.742274@2] datain_src:4, datain_chnum:4, datain_chumask:f
  1974. [ 4.747967@2] datalb_src:1, datalb_chnum:2, datalb_chmask:3
  1975. [ 4.753599@2] datain_lane_mask:0x5, datalb_lane_mask:0x1
  1976. [ 4.758967@2] datalb_format: 1, chmask for lanes: 0x3
  1977. [ 4.764179@2] loopback_platform_probe, p_loopback->id:0 register soc platform
  1978. [ 4.771311@2] audiolocker_platform_probe
  1979. [ 4.775906@0] Register vad
  1980. [ 4.780122@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
  1981. [ 4.785428@0] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16
  1982. [ 4.792797@0] aml_dai_tdm_probe, failed add snd tdm controls
  1983. [ 4.798501@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
  1984. [ 4.806129@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
  1985. [ 4.813563@0] aml_dai_tdm_probe, failed add snd tdm controls
  1986. [ 4.819135@0] aml_dai_spdif_probe
  1987. [ 4.822450@0] pin(1) should be selected for only one usage
  1988. [ 4.827904@0] master_mode(1), binv(1), finv(0) out_skew(2), in_skew(3)
  1989. [ 4.834880@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok
  1990. [ 4.841020@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  1991. [ 4.847814@2] asoc-aml-card auge_sound: multicodec <-> TDM-B mapping ok
  1992. [ 4.854094@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  1993. [ 4.860871@2] asoc-aml-card auge_sound: multicodec <-> TDM-C mapping ok
  1994. [ 4.867514@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
  1995. [ 4.873292@2]
  1996. [ 4.873292@2] loopback_dai_set_sysclk, 0, 12288000, 0
  1997. [ 4.879956@2] asoc loopback_dai_set_fmt, 0x4010, ed5fbd10
  1998. [ 4.885636@2] asoc-aml-card auge_sound: dummy <-> ff642000.audiobus:loopback@0 mapping ok
  1999. [ 4.895243@0] snd_card_add_kcontrols card:eccfb010
  2000. [ 4.898265@0] effect_v2 is not init
  2001. [ 4.901705@0] Failed to add VAD controls
  2002. [ 4.905635@0] eq/drc v1 function enable
  2003. [ 4.934110@3] GACT probability NOT on
  2004. [ 4.934134@3] Mirror/redirect action on
  2005. [ 4.935945@3] u32 classifier
  2006. [ 4.938814@3] Actions configured
  2007. [ 4.942375@3] Netfilter messages via NETLINK v0.30.
  2008. [ 4.947370@3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  2009. [ 4.953645@3] ctnetlink v0.93: registering with nfnetlink.
  2010. [ 4.959271@0] xt_time: kernel timezone is -0000
  2011. [ 4.963570@0] ipip: IPv4 and MPLS over IPv4 tunneling driver
  2012. [ 4.969502@2] IPv4 over IPsec tunneling driver
  2013. [ 4.973808@2] ip_tables: (C) 2000-2006 Netfilter Core Team
  2014. [ 4.979085@2] arp_tables: arp_tables: (C) 2002 David S. Miller
  2015. [ 4.984819@2] Initializing XFRM netlink socket
  2016. [ 4.989415@2] NET: Registered protocol family 10
  2017. [ 4.998649@0] mip6: Mobile IPv6
  2018. [ 4.998685@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  2019. [ 5.003224@4] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  2020. [ 5.009004@4] NET: Registered protocol family 17
  2021. [ 5.013095@4] NET: Registered protocol family 15
  2022. [ 5.017688@4] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  2023. [ 5.030818@5] Bluetooth: RFCOMM TTY layer initialized
  2024. [ 5.035806@5] Bluetooth: RFCOMM socket layer initialized
  2025. [ 5.041086@5] Bluetooth: RFCOMM ver 1.11
  2026. [ 5.044979@5] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2027. [ 5.050440@5] Bluetooth: BNEP filters: protocol multicast
  2028. [ 5.055813@5] Bluetooth: BNEP socket layer initialized
  2029. [ 5.060925@5] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2030. [ 5.066991@5] Bluetooth: HIDP socket layer initialized
  2031. [ 5.072112@5] l2tp_core: L2TP core driver, V2.0
  2032. [ 5.076618@5] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  2033. [ 5.081550@5] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  2034. [ 5.087279@5] l2tp_netlink: L2TP netlink interface
  2035. [ 5.092053@5] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  2036. [ 5.098115@5] l2tp_debugfs: L2TP debugfs support
  2037. [ 5.102698@5] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  2038. [ 5.109299@5] NET: Registered protocol family 35
  2039. [ 5.113901@5] Key type dns_resolver registered
  2040. [ 5.119710@5] Registering SWP/SWPB emulation handler
  2041. [ 5.123780@0] registered taskstats version 1
  2042. [ 5.135693@1] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
  2043. [ 5.140198@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  2044. [ 5.143108@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  2045. [ 5.151258@1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
  2046. [ 5.159812@1] xhci-hcd xhci-hcd.0.auto: irq 30, io mem 0xff500000
  2047. [ 5.166489@1] hub 1-0:1.0: USB hub found
  2048. [ 5.169711@1] hub 1-0:1.0: 2 ports detected
  2049. [ 5.174115@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  2050. [ 5.179499@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  2051. [ 5.187324@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  2052. [ 5.195966@0] hub 2-0:1.0: USB hub found
  2053. [ 5.199467@3] hub 2-0:1.0: 1 port detected
  2054. [ 5.203897@3] i2c i2c-4: sensor_probe: kxtj3,edd32a00
  2055. [ 5.209033@0] sensors 4-000e: sensor_probe:kxtj3:devid=0x35,ops=0xc166a2e4
  2056. [ 5.217004@0] input: gsensor as /devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-000e/input/input5
  2057. [ 5.226023@0] sensors 4-000e: sensor_probe:use polling,delay=30 ms
  2058. [ 5.231410@0] sensors 4-000e: sensor_probe:miscdevice: gsensor
  2059. [ 5.237044@0] sensors 4-000e: sensor_probe:initialized ok,sensor name:kxtj3,type:2,id=0
  2060. [ 5.237044@0]
  2061. [ 5.247789@0] khadas-rtc 4-0051: setting system clock to 2021-06-01 03:27:53 UTC (1622518073)
  2062. [ 5.255384@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
  2063. [ 5.363960@4] dwc_otg: Core Release: 3.30a
  2064. [ 5.363979@4] dwc_otg: Setting default values for core params
  2065. [ 5.368149@4] dwc_otg: curmode: 0, host_only: 0
  2066. [ 5.384807@4] dwc_otg: Using Buffer DMA mode
  2067. [ 5.384825@4] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  2068. [ 5.388722@4] dwc_otg: Working on port type = SLAVE
  2069. [ 5.393574@4] dwc_otg: Dedicated Tx FIFOs mode
  2070. [ 5.398587@4] input: adc_keypad as /devices/platform/adc_keypad/input/input6
  2071. [ 5.406660@0] meson_cdev probe
  2072. [ 5.408163@0] meson_cdev index: 0
  2073. [ 5.411536@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
  2074. [ 5.420534@0] meson_cdev index: 1
  2075. [ 5.423860@2] thermal: no cluster id, cpucore as one cooldev
  2076. [ 5.429414@2] meson_cdev index: 2
  2077. [ 5.432680@2] cpucore_cooling_register, max_cpu_core_num:6
  2078. [ 5.438134@2] cpucore_cooling_register, clutser[1] core num:4
  2079. [ 5.443852@2] cpucore_cooling_register, clutser[0] core num:2
  2080. [ 5.449626@2] meson_cdev index: 3
  2081. [ 5.452873@2] meson_cdev index: 4
  2082. [ 5.456175@2] find tzd id: 0
  2083. [ 5.459089@2] find tzd id: 0
  2084. [ 5.461930@2] find tzd id: 0
  2085. [ 5.464752@2] meson_cdev probe done
  2086. [ 5.468339@2] gxbb_pm: enter meson_pm_probe!
  2087. [ 5.472460@2] no vddio3v3_en pin[ 5.475487@2] pm-meson aml_pm: Can't get switch_clk81
  2088. [ 5.480518@2] gxbb_pm: meson_pm_probe done
  2089. [ 5.484x 5.491114@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
  2090. [ 5.501876@3] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  2091. [ 5.601920@0] prepare_namespace() wait 79
  2092. [ 5.601988@0] md: Waiting for all devices to be available before autodetect
  2093. [ 5.607269@2] md: If you don't use raid, use raid=noautodetect
  2094. [ 5.613642@0] md: Autodetecting RAID arrays.
  2095. [ 5.617298@0] md: Scanned 0 and added 0 devices.
  2096. [ 5.621923@2] md: autorun ...
  2097. [ 5.624827@2] md: ... autorun DONE.
  2098. [ 5.628836@0] EXT4-fs (mmcblk0p18): couldn't mount as ext3 due to feature incompatibilities
  2099. [ 5.637136@0] EXT4-fs (mmcblk0p18): couldn't mount as ext2 due to feature incompatibilities
  2100. [ 5.651874@0] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: (null)
  2101. [ 5.654037@0] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
  2102. [ 5.662205@0] devtmpfs: mounted
  2103. [ 5.664822@0] Freeing unused kernel memory: 1024K
  2104. [ 5.669176@3] hub 1-1:1.0: USB hub found
  2105. [ 5.672747@3] hub 1-1:1.0: 4 ports detected
  2106. [ 5.687699@0] init: init first stage started!
  2107. [ 5.688153@0] init: Using Android DT directory /proc/device-tree/firmware/android/
  2108. [ 5.697089@0] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
  2109. [ 5.749420@0] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
  2110. [ 5.753959@0] init: [libfs_mgr]__mount(source=/dev/block/odm,target=/odm,type=ext4)=0: Success
  2111. [ 5.764837@0] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
  2112. [ 5.772866@0] init: [libfs_mgr]__mount(source=/dev/block/product,target=/product,type=ext4)=0: Success
  2113. [ 5.784152@0] EXT4-fs (mmcblk0p16): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
  2114. [ 5.791882@0] init: [libfs_mgr]__mount(source=/dev/block/vendor,target=/vendor,type=ext4)=0: Success
  2115. [ 5.801029@0] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  2116. [ 5.808193@0] init: Loading SELinux policy
  2117. [ 5.929408@0] audit: type=1403 audit(1622518074.176:2): policy loaded auid=4294967295 ses=4294967295
  2118. [ 5.933131@0] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
  2119. [ 5.933131@0]
  2120. [ 5.949423@2] selinux: SELinux: Loaded file_contexts
  2121. [ 5.949423@2]
  2122. [ 5.952793@2] init: init second stage started!
  2123. [ 5.979535@0] init: Using Android DT directory /proc/device-tree/firmware/android/
  2124. [ 5.984601@2] selinux: SELinux: Loaded file_contexts
  2125. [ 5.984601@2]
  2126. [ 5.988076@2] init: Running restorecon...
  2127. [ 5.995500@2] init: waitid failed: No child processes
  2128. [ 6.000635@0] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  2129. [ 6.011687@0] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  2130. [ 6.018728@0] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2644
  2131. [ 6.025480@0] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2645
  2132. [ 6.031927@2] init: Parsing file /init.rc...
  2133. [ 6.132524@2] ueventd: ueventd started!
  2134. [ 6.134673@2] selinux: SELinux: Loaded file_contexts
  2135. [ 6.134673@2]
  2136. [ 6.137435@2] ueventd: Parsing file /ueventd.rc...
  2137. [ 6.144331@3] mali_kbase: loading out-of-tree module taints kernel.
  2138. [ 6.144718@0] ueventd: Parsing file /vendor/ueventd.rc...
  2139. [ 6.145782@0] ueventd: /vendor/ueventd.rc: 120: /sys/ lines must have 5 entries
  2140. [ 6.146017@0] ueventd: Parsing file /odm/ueventd.rc...
  2141. [ 6.146070@0] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  2142. [ 6.146187@0] ueventd: Parsing file /ueventd.amlogic.rc...
  2143. [ 6.146231@0] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
  2144. [ 6.194145@3] mali ffe40000.bifrost: Continuing without Mali regulator control
  2145. [ 6.198945@3] mali ffe40000.bifrost: max pp is 2
  2146. [ 6.203475@3] mali ffe40000.bifrost: set min pp to default 1
  2147. [ 6.209086@3] mali ffe40000.bifrost: min pp is 1
  2148. [ 6.213682@3] mali ffe40000.bifrost: set min clk default to 0
  2149. [ 6.219395@3] mali ffe40000.bifrost: min clk is 0
  2150. [ 6.224182@3] mali ffe40000.bifrost: hiu io source 0xf14f7000
  2151. [ 6.229974@3] mali ffe40000.bifrost: hiu io source 0xf14f9000
  2152. [ 6.235820@3] mali ffe40000.bifrost: num of pp used most of time 1
  2153. [ 6.242022@3] mali ffe40000.bifrost: clock dvfs cfg table size is 6
  2154. [ 6.248238@3] mali ffe40000.bifrost: max clk set 4
  2155. [ 6.252953@3] mali ffe40000.bifrost: max clk is 4
  2156. [ 6.257721@3] mali ffe40000.bifrost: turbo clk set to 5
  2157. [ 6.262920@3] mali ffe40000.bifrost: turbo clk is 5
  2158. [ 6.267842@3] mali ffe40000.bifrost: default clk set to 4
  2159. [ 6.273208@3] mali ffe40000.bifrost: default clk is 4
  2160. [ 6.278347@3] mali ffe40000.bifrost: ====================0====================
  2161. [ 6.278347@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  2162. [ 6.296275@3] mali ffe40000.bifrost: ====================1====================
  2163. [ 6.296275@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  2164. [ 6.314224@3] mali ffe40000.bifrost: ====================2====================
  2165. [ 6.314224@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  2166. [ 6.332154@3] mali ffe40000.bifrost: ====================3====================
  2167. [ 6.332154@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  2168. [ 6.350102@3] mali ffe40000.bifrost: ====================4====================
  2169. [ 6.350102@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
  2170. [ 6.368205@3] mali ffe40000.bifrost: ====================5====================
  2171. [ 6.368205@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
  2172. [ 6.386340@3] mali ffe40000.bifrost: clock dvfs table size is 6
  2173. [ 6.392309@3] mali_plat=bf05b2d8
  2174. [ 6.395674@3] find tzd id: 0
  2175. [ 6.397251@5] ueventd: Coldboot took 0.248 seconds
  2176. [ 6.403082@3] gpu cooling register okay with err=0
  2177. [ 6.407957@3] find tzd id: 0
  2178. [ 6.410682@3] gpu core cooling register okay with err=0
  2179. [ 6.415888@3] shader_present=3, tiler_present=1, l2_present=1
  2180. [ 6.421664@3] Mali_pwr_on:gpu_irq : 200
  2181. [ 6.425675@4] hrtimer: interrupt took 9750 ns
  2182. [ 6.429960@4] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
  2183. [ 6.437671@3] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
  2184. [ 6.445535@0] mali ffe40000.bifrost: Probed as mali0
  2185. [ 6.452351@0] PPMGRVPP: info: RegisterTB_Function: gfunc (null), func: bf081024, ver:TB detect: v2016.11.15a *** [ Tue Mar 19 19:21:39 CST 2019]-[ renjiang.han]-[* master]-[67f03d41e0612a58d1edd96db9bc8b92de1a59b1]-[Date: Wed Jul 4 00:44:57 2018 +0800]-[2]
  2186. [ 6.476905@2] audit: type=1400 audit(1622518074.724:3): avc: denied { write } for pid=1 comm="init" name="alignment" dev="proc" ino=4026531979 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  2187. [ 6.491231@2] audit: type=1400 audit(1622518074.740:4): avc: denied { open } for pid=1 comm="init" path="/proc/cpu/alignment" dev="proc" ino=4026531979 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  2188. [ 6.513872@1] lcd vlock_en=1, vlock_mode=0x4
  2189. [ 6.525505@4] audit: type=1400 audit(1622518074.772:5): avc: denied { write } for pid=2644 comm="init" name="watermark_scale_factor" dev="proc" ino=4327 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_vm_writable:s0 tclass=file permissive=1
  2190. [ 6.559906@3] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
  2191. [ 6.570820@4] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2192. [ 6.677772@0] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  2193. [ 6.677772@0]
  2194. [ 6.678547@0] e2fsck: /dev/block/data: clean, 3581/730080 files, 144200/2918400 blocks
  2195. [ 6.678547@0]
  2196. [ 6.690117@1] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
  2197. [ 6.700343@0] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2198. [ 6.707921@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  2199. [ 6.716035@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2200. [ 6.790442@4] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  2201. [ 6.790442@4]
  2202. [ 6.791173@4] e2fsck: /dev/block/cache: clean, 14/71712 files, 13057/286720 blocks
  2203. [ 6.791173@4]
  2204. [ 6.801112@4] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  2205. [ 6.810655@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2206. [ 6.823923@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  2207. [ 6.832356@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  2208. [ 6.877716@3] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  2209. [ 6.877716@3]
  2210. [ 6.878471@3] e2fsck: /dev/block/metadata: clean, 12/4096 files, 1166/4096 blocks
  2211. [ 6.878471@3]
  2212. [ 6.888289@3] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  2213. [ 6.896178@5] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2214. [ 6.928300@5] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  2215. [ 6.928300@5]
  2216. [ 6.929035@5] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  2217. [ 6.929035@5]
  2218. [ 6.936674@5] e2fsck: Pass 2: Checking directory structure
  2219. [ 6.936674@5]
  2220. [ 6.943761@5] e2fsck: Pass 3: Checking directory connectivity
  2221. [ 6.943761@5]
  2222. [ 6.951837@5] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
  2223. [ 6.961629@0] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2224. [ 6.976953@0] audit: type=1400 audit(1622518075.224:6): avc: denied { read } for pid=3219 comm="imageserver" name="vndbinder" dev="tmpfs" ino=3728 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  2225. [ 6.993433@0] audit: type=1400 audit(1622518075.240:7): avc: denied { write } for pid=3219 comm="imageserver" name="vndbinder" dev="tmpfs" ino=3728 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  2226. [ 7.015202@2] audit: type=1400 audit(1622518075.264:8): avc: denied { open } for pid=3219 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=3728 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  2227. [ 7.037423@2] audit: type=1400 audit(1622518075.288:9): avc: denied { ioctl } for pid=3219 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=3728 ioctlcmd=0x6209 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
  2228. [ 7.073302@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
  2229. [ 7.076369@0] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  2230. [ 7.086837@0] init: 10 output lines suppressed due to ratelimiting
  2231. [ 7.101402@3] No find node.
  2232. [ 7.101426@3] register clk_set_setting cpu[46]
  2233. [ 7.107571@4] Registered firmware driver success.
  2234. [ 7.108586@4] Try to load video/h264_enc.bin ...
  2235. [ 7.114332@0] load firmware size : 76288, Name : video/h264_enc.bin.
  2236. [ 7.119321@0] Try to load video/video_ucode.bin ...
  2237. [ 7.134851@0] load firmware size : 1459200, Name : video/video_ucode.bin.
  2238. [ 7.186893@0] Amlogic A/V streaming port init
  2239. [ 7.189439@5] get gate demux control ok ee2cc280
  2240. [ 7.190247@5] get gate parser_top control ok ee2cc680
  2241. [ 7.195277@5] get gate vdec control ok ee2ccb00
  2242. [ 7.199786@5] get gate clk_81 control failed (null)
  2243. [ 7.204804@5] get gate clk_vdec_mux control ok ee2ccbc0
  2244. [ 7.210028@5] get gate clk_hcodec_mux control ok ee2ccf40
  2245. [ 7.215387@5] get gate clk_hevc_mux control ok ee2cc100
  2246. [ 7.220578@5] get gate clk_hevcb_mux control ok ee2cc580
  2247. [ 7.225863@5] get gate ahbarb0 control ok ee2cc300
  2248. [ 7.230600@5] get gate asyncfifo control failed (null)
  2249. [ 7.256910@3] ammvdec_h264 module init
  2250. [ 7.287920@0] ammvdec_mpeg12 module init
  2251. [ 7.297151@0] ammvdec_mpeg4_driver_init_module
  2252. [ 7.327564@4] amvenc_avc_probe -- reserved memory config fail.
  2253. [ 7.327755@4] amvenc_avc - cma memory pool size: 60 MB
  2254. [ 7.332913@4] encode_wq_init.
  2255. [ 7.335824@4] encode start monitor.
  2256. [ 7.339367@3] encode workqueue monitor start.
  2257. [ 7.344502@0] vpu_init
  2258. [ 7.346186@2] vpu_probe
  2259. [ 7.348381@2] HevcEnc reserved memory config fail.
  2260. [ 7.353173@2] HevcEnc - cma memory pool size: 64 MB
  2261. [ 7.358038@2] HevcEnc - wave420l_irq: 66
  2262. [ 7.361969@2] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xf2614000
  2263. [ 7.372270@0] success to probe vpu device with video memory from cma
  2264. [ 7.413203@1] audit: type=1400 audit(1622518075.660:10): avc: denied { setattr } for pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532026 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
  2265. [ 7.447350@5] logd.auditd: start
  2266. [ 7.447380@5] logd.klogd: 7189534960
  2267. [ 7.549287@4] type=1400 audit(1622518075.796:11): avc: denied { setattr } for pid=2644 comm="init" name="droidota" dev="mmcblk0p20" ino=23 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
  2268. [ 7.564295@4] type=1400 audit(1622518075.796:11): avc: denied { setattr } for pid=2644 comm="init" name="droidota" dev="mmcblk0p20" ino=23 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
  2269. [ 7.584835@4] type=1400 audit(1622518075.796:12): avc: denied { setattr } for pid=2644 comm="init" name="log" dev="mmcblk0p20" ino=389389 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
  2270. [ 7.587336@5] probe iq_dev for sensor: os08a10
  2271. [ 7.587342@5] get_cali_name_id@:97 SUBDEV_IQ(CRIT) :Loading Calibration for OS08A10_IPC
  2272. [ 7.587343@5]
  2273. [ 7.618161@4] type=1400 audit(1622518075.796:12): avc: denied { setattr } for pid=2644 comm="init" name="log" dev="mmcblk0p20" ino=389389 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
  2274. [ 7.637704@4] type=1400 audit(1622518075.800:13): avc: denied { setattr } for pid=2644 comm="init" name="media" dev="mmcblk0p20" ino=21 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  2275. [ 7.641037@2] config sensor os08a10 driver.
  2276. [ 7.641039@2] sensor bsp init
  2277. [ 7.641044@2] cannot get g12a_24m clk
  2278. [ 7.641045@2] set mclk fail
  2279. [ 7.682646@5] arm_sensor_i2c_probe: start to probe
  2280. [ 7.682739@5] system_i2c_init:success to add i2c driver
  2281. [ 7.687460@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2282. [ 7.694164@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2283. [ 7.700842@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2284. [ 7.707117@0] sensor_get_id@:481 GENERIC(CRIT) :sensor_get_id: Failed to read sensor id
  2285. [ 7.714997@3]
  2286. [ 7.716634@3] sensor_detect_os08a10:0
  2287. [ 7.720313@3] arm_sensor_i2c_remove: remove i2c sensor
  2288. [ 7.843157@0] arm_isp ff140000.isp: assigned reserved memory node linux,isp_cma
  2289. [ 7.844856@0] AM_SC: am_sc_parse_dt: rs idx info: name: isp_sc
  2290. [ 7.850889@0] AM_SC: am_sc_parse_dt:rs info: irq: 74
  2291. [ 7.861045@0] interrupt comes in (irq = 75) without app handler, status: 0x200, pusle mode:0
  2292. [ 7.869620@0] acamera_fw_init@:106 GENERIC(CRIT) :seamless:0
  2293. [ 7.869668@3] pwr_enable: get_named_gpio power-enable fail
  2294. [ 7.875118@3] set power fail
  2295. [ 7.878794@3] init clock is 24 MHZ
  2296. [ 7.923075@0] arm_sensor_i2c_probe: start to probe
  2297. [ 7.923157@0] arm_sensor_i2c_probe: success get link device:phy-csi
  2298. [ 7.928653@0] AM_MIPI: am_mipi_parse_dt:Success to get link device: isp-adapter
  2299. [ 7.936006@0] platform ff650000.isp-adapter: assigned reserved memory node linux,adapt_cma
  2300. [ 7.944010@0] AM_ADAP: adapter alloc 24M memory
  2301. [ 7.948655@0] system_i2c_init:success to add i2c driver
  2302. [ 7.956309@0] pwr_enable: get_named_gpio power-enable fail
  2303. [ 7.969317@0] pwr_enable: get_named_gpio power-enable fail
  2304. [ 7.979883@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2305. [ 7.981353@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2306. [ 7.989088@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2307. [ 7.994317@0] sensor_get_id@:481 GENERIC(CRIT) :sensor_get_id: Failed to read sensor id
  2308. [ 8.002293@2]
  2309. [ 8.004356@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2310. [ 8.011013@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2311. [ 8.017903@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2312. [ 8.025443@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2313. [ 8.031438@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2314. [ 8.038088@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2315. [ 8.044891@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2316. [ 8.051598@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2317. [ 8.059339@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2318. [ 8.065128@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2319. [ 8.071977@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2320. [ 8.078641@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2321. [ 8.085518@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2322. [ 8.092160@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2323. [ 8.099964@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2324. [ 8.105676@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2325. [ 8.112530@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2326. [ 8.119237@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2327. [ 8.126045@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2328. [ 8.132782@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2329. [ 8.140473@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2330. [ 8.146248@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2331. [ 8.153101@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2332. [ 8.159770@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2333. [ 8.166654@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2334. [ 8.173257@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2335. [ 8.181022@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2336. [ 8.186808@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2337. [ 8.193663@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2338. [ 8.200372@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2339. [ 8.207147@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2340. [ 8.213813@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2341. [ 8.221604@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2342. [ 8.227339@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2343. [ 8.234261@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2344. [ 8.240853@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2345. [ 8.247760@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2346. [ 8.255287@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2347. [ 8.261222@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2348. [ 8.267971@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2349. [ 8.274750@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2350. [ 8.281431@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2351. [ 8.288269@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2352. [ 8.295843@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2353. [ 8.301891@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2354. [ 8.308445@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2355. [ 8.315329@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2356. [ 8.322084@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2357. [ 8.328852@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2358. [ 8.336494@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2359. [ 8.342368@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2360. [ 8.349078@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2361. [ 8.355891@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2362. [ 8.362559@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2363. [ 8.369430@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2364. [ 8.377005@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2365. [ 8.382963@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2366. [ 8.389600@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2367. [ 8.396443@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2368. [ 8.403162@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2369. [ 8.409981@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2370. [ 8.417389@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2371. [ 8.423483@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2372. [ 8.430179@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2373. [ 8.437046@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2374. [ 8.443684@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2375. [ 8.451491@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2376. [ 8.457200@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2377. [ 8.464067@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2378. [ 8.470724@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2379. [ 8.477570@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2380. [ 8.484261@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2381. [ 8.492013@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2382. [ 8.497779@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2383. [ 8.504614@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2384. [ 8.511282@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2385. [ 8.518172@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2386. [ 8.524794@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2387. [ 8.532592@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2388. [ 8.538329@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2389. [ 8.545132@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2390. [ 8.551848@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2391. [ 8.558670@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2392. [ 8.565344@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2393. [ 8.573098@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2394. [ 8.578898@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2395. [ 8.585724@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2396. [ 8.592386@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2397. [ 8.599237@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2398. [ 8.605967@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2399. [ 8.613446@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2400. [ 8.619465@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2401. [ 8.626286@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2402. [ 8.632973@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2403. [ 8.639837@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2404. [ 8.647421@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2405. [ 8.653322@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2406. [ 8.660004@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2407. [ 8.666877@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2408. [ 8.673528@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2409. [ 8.680394@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2410. [ 8.687969@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2411. [ 8.693893@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2412. [ 8.700558@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2413. [ 8.707430@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2414. [ 8.714111@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2415. [ 8.720896@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2416. [ 8.728537@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2417. [ 8.734475@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2418. [ 8.741135@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2419. [ 8.748001@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2420. [ 8.754641@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2421. [ 8.761485@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2422. [ 8.769078@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2423. [ 8.775039@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2424. [ 8.781702@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2425. [ 8.788539@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2426. [ 8.795204@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2427. [ 8.802986@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2428. [ 8.808740@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2429. [ 8.815576@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2430. [ 8.822222@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2431. [ 8.829056@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2432. [ 8.835736@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2433. [ 8.843535@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2434. [ 8.849285@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2435. [ 8.856091@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2436. [ 8.862796@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2437. [ 8.869616@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2438. [ 8.876335@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2439. [ 8.884114@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2440. [ 8.889837@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2441. [ 8.896721@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2442. [ 8.903354@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2443. [ 8.910212@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2444. [ 8.916907@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2445. [ 8.924651@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2446. [ 8.930439@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2447. [ 8.937241@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2448. [ 8.943919@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2449. [ 8.950801@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2450. [ 8.957434@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2451. [ 8.965230@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2452. [ 8.970960@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2453. [ 8.977819@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2454. [ 8.984484@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2455. [ 8.991356@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2456. [ 8.998957@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2457. [ 9.004843@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2458. [ 9.011560@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2459. [ 9.018365@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2460. [ 9.025044@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2461. [ 9.031912@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2462. [ 9.039476@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2463. [ 9.045430@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2464. [ 9.052081@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2465. [ 9.058930@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2466. [ 9.065625@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2467. [ 9.072447@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2468. [ 9.080078@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2469. [ 9.085971@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2470. [ 9.092609@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2471. [ 9.099521@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2472. [ 9.106176@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2473. [ 9.113059@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2474. [ 9.120585@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2475. [ 9.126541@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2476. [ 9.133236@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2477. [ 9.140049@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2478. [ 9.146747@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2479. [ 9.153545@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2480. [ 9.161171@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2481. [ 9.167094@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2482. [ 9.173755@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2483. [ 9.180646@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2484. [ 9.187286@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2485. [ 9.195119@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2486. [ 9.200770@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2487. [ 9.207654@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2488. [ 9.214357@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2489. [ 9.221169@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2490. [ 9.227864@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2491. [ 9.235615@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2492. [ 9.241362@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2493. [ 9.248258@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2494. [ 9.254898@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2495. [ 9.261755@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2496. [ 9.268395@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2497. [ 9.276159@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2498. [ 9.281955@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2499. [ 9.288770@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2500. [ 9.295471@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2501. [ 9.302284@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2502. [ 9.308959@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2503. [ 9.316762@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2504. [ 9.322462@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2505. [ 9.329366@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2506. [ 9.336002@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2507. [ 9.342843@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2508. [ 9.349550@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2509. [ 9.357261@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2510. [ 9.363085@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2511. [ 9.369893@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2512. [ 9.376556@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2513. [ 9.383407@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2514. [ 9.391010@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2515. [ 9.396957@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2516. [ 9.403606@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2517. [ 9.410470@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2518. [ 9.417130@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2519. [ 9.423962@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2520. [ 9.431582@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2521. [ 9.437494@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2522. [ 9.444181@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2523. [ 9.451018@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2524. [ 9.457675@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2525. [ 9.464549@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2526. [ 9.472121@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2527. [ 9.478069@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2528. [ 9.484721@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2529. [ 9.491576@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2530. [ 9.498269@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2531. [ 9.505080@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2532. [ 9.512700@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2533. [ 9.518618@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2534. [ 9.525281@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2535. [ 9.532163@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2536. [ 9.538802@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2537. [ 9.545667@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2538. [ 9.553251@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2539. [ 9.559172@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2540. [ 9.565837@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2541. [ 9.572696@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2542. [ 9.579385@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2543. [ 9.587136@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2544. [ 9.592918@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2545. [ 9.599731@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2546. [ 9.606411@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2547. [ 9.613270@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2548. [ 9.619923@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2549. [ 9.627718@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2550. [ 9.633441@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2551. [ 9.640294@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2552. [ 9.646982@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2553. [ 9.653814@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2554. [ 9.660502@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2555. [ 9.668252@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2556. [ 9.674026@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2557. [ 9.680844@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2558. [ 9.687547@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2559. [ 9.694398@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2560. [ 9.701039@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2561. [ 9.708813@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2562. [ 9.714563@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2563. [ 9.721435@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2564. [ 9.728122@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2565. [ 9.734928@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2566. [ 9.741595@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2567. [ 9.749388@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2568. [ 9.755129@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2569. [ 9.761995@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2570. [ 9.768646@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2571. [ 9.775508@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2572. [ 9.783103@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2573. [ 9.789026@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2574. [ 9.795725@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2575. [ 9.802536@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2576. [ 9.809219@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2577. [ 9.816047@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2578. [ 9.823636@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2579. [ 9.829608@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2580. [ 9.836246@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2581. [ 9.843113@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2582. [ 9.849753@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2583. [ 9.856610@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2584. [ 9.864230@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2585. [ 9.870153@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2586. [ 9.876826@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2587. [ 9.883643@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2588. [ 9.890330@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2589. [ 9.897188@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2590. [ 9.904750@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2591. [ 9.910723@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2592. [ 9.917361@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2593. [ 9.924211@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2594. [ 9.930904@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2595. [ 9.937729@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2596. [ 9.945346@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2597. [ 9.951242@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2598. [ 9.957951@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2599. [ 9.964769@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2600. [ 9.971446@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2601. [ 9.979242@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2602. [ 9.984958@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2603. [ 9.991844@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2604. [ 9.998488@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2605. [ 10.005320@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2606. [ 10.012028@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2607. [ 10.019763@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2608. [ 10.025555@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2609. [ 10.032364@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2610. [ 10.039048@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2611. [ 10.045915@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2612. [ 10.052529@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2613. [ 10.060356@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2614. [ 10.066091@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2615. [ 10.072894@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2616. [ 10.079637@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2617. [ 10.086427@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2618. [ 10.093166@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2619. [ 10.100867@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2620. [ 10.106608@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2621. [ 10.113527@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2622. [ 10.120130@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2623. [ 10.127066@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2624. [ 10.133651@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2625. [ 10.141432@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2626. [ 10.147184@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2627. [ 10.154090@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2628. [ 10.160788@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2629. [ 10.167603@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2630. [ 10.175193@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2631. [ 10.181057@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2632. [ 10.187780@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2633. [ 10.194646@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2634. [ 10.201282@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2635. [ 10.208157@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2636. [ 10.215716@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2637. [ 10.221629@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2638. [ 10.228370@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2639. [ 10.235173@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2640. [ 10.241832@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2641. [ 10.248664@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2642. [ 10.256242@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2643. [ 10.262284@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2644. [ 10.268847@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2645. [ 10.275727@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2646. [ 10.282379@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2647. [ 10.289213@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2648. [ 10.296873@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2649. [ 10.302752@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2650. [ 10.309430@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2651. [ 10.316313@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2652. [ 10.322984@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2653. [ 10.329644@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2654. [ 10.337195@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2655. [ 10.342582@2] AM_MIPI: am_mipi_init:Success mipi init
  2656. [ 10.347572@2] AM_ADAP: inject_data_flag = 0, dump_data_flag = 0
  2657. [ 10.354588@0] AM_ADAP: frontend : width = 1920, val = 150
  2658. [ 10.358902@0] sensor_set_mode@:576 GENERIC(CRIT) :Mode 0, Setting num: 2, RES:1920x1080
  2659. [ 10.366788@2]
  2660. [ 10.368440@2] get_cali_name_id@:97 SUBDEV_IQ(CRIT) :Loading Calibration for OS08A10_IPC
  2661. [ 10.376409@2]
  2662. [ 10.378057@2] iq_ioctl@:255 SUBDEV_IQ(CRIT) :soc_iq get config os08a10 according to sensor drv
  2663. [ 10.387919@2] general_set_wdr_mode@:490 GENERAL(CRIT) :Setting Linear Binary Sequence
  2664. [ 10.394439@2]
  2665. [ 10.396482@2] sbuf_mgr_alloc_sbuf@:175 SBUF(CRIT) :sbuf: len_needed: 238132, len_alloc: 245759, len_used: 241664, page_size: 4096, buf_alloc: ebe00000, buf_used: ebe00000.
  2666. [ 10.411351@2] sbuf_calibration_init@:495 SBUF(CRIT) :sbuf_calibration wdr_mode updated: 65535 -> 0.
  2667. [ 10.422211@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2668. [ 10.427541@0] system_i2c_write:failed to write reg data: rc -6, saddr 0x36
  2669. [ 10.436253@0] connection_thread@:105 GENERIC(CRIT) :[ 10.436301@2] connection_thread@:105 GENERIC(CRIT) :
  2670. [ 10.436302@2] isp_fw_process@:123 GENERIC(CRIT) :
  2671. [ 10.436303@2] isp_fw_process start
  2672. [ 10.436304@2]
  2673. [ 10.443082@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2674. [ 10.443538@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2675. [ 10.443993@0] system_i2c_read:failed to read reg data: rc -6, saddr 0x36
  2676. [ 10.443998@0] sensor_get_id@:481 GENERIC(CRIT) :
  2677. [ 10.444000@0] sensor_get_id: Failed to read sensor id
  2678. [ 10.444001@0]
  2679. [ 10.477516@3] logd.daemon: reinit
  2680. [ 10.487894@4] connection_thread start
  2681. [ 10.491543@4]
  2682. [ 10.637087@4] healthd: BatteryTemperaturePath not found
  2683. [ 10.637122@4] healthd: BatteryCycleCountPath not found
  2684. [ 10.678733@5] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed
  2685. [ 10.681743@5] healthd: battery l=100 v=4 t=0.0 h=2 st=2 c=1 fc=10000000 chg=u
  2686. [ 10.682323@3] type=1400 audit(1622518075.800:13): avc: denied { setattr } for pid=2644 comm="init" name="media" dev="mmcblk0p20" ino=21 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
  2687. [ 10.682803@3] VID: VD1 off
  2688. [ 10.716171@3] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
  2689. [ 10.716173@3] audit: rate limit exceeded
  2690. [ 10.736140@1] fb: osd[0] enable: 0 (systemcontrol)
  2691. [ 10.741049@3] fb: osd[1] enable: 0 (systemcontrol)
  2692. [ 10.746003@4] type=1400 audit(1622518078.928:14): avc: denied { read } for pid=3429 comm="systemcontrol" name="u:object_r:system_prop:s0" dev="tmpfs" ino=16407 scontext=u:r:system_control:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  2693. [ 10.788883@4] unifykey: amlkey_init_gen() enter!
  2694. [ 10.790517@1] hdmitx: system: set hdcp_pwr 1
  2695. [ 10.836631@3] emmc_key_read:114, read ok
  2696. [ 10.836669@3] unifykey: amlkey_init_gen() storagekey_info.buffer=c5080000, storagekey_info.size = 40000!
  2697. [ 10.841053@0] fb: osd_open, 1514, fb_index=0,fb_rmem_size=33554432
  2698. [ 10.841174@0] fb: osd_open, 1514, fb_index=1,fb_rmem_size=1048576
  2699. [ 10.841210@0] fb: osd_open, 1514, fb_index=2,fb_rmem_size=1048576
  2700. [ 10.841368@0] fb: vpu clkc clock is 199 MHZ
  2701. [ 10.841391@0] fb: osd_open, 1514, fb_index=3,fb_rmem_size=8388608
  2702. [ 10.877761@3] vfm_map_store.part.1:rm default
  2703. [ 10.878004@3] vfm_map_store.part.1:add default decoder ppmgr deinterlace amvideo
  2704. [ 10.887882@3] file system registered
  2705. [ 10.890478@5] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
  2706. [ 10.893584@3] hdmitx: system: restore hdcp_pwr 0
  2707. [ 10.898404@4] cpufreq_interactive: cpufreq_hmp_boost_start.part.4()
  2708. [ 10.903684@1] hdmitx: system: sname = 1600x1200p60hz
  2709. [ 10.903687@1] hdmitx: system: char_clk = 162000
  2710. [ 10.903689@1] hdmitx: system: cd = 6
  2711. [ 10.903691@1] hdmitx: system: cs = 1
  2712. [ 10.903695@1] hdmitx: RX tmds clk: 225 Calc clk: 162
  2713. [ 10.904010@1] vout: vmode set to 1600x1200p60hz
  2714. [ 10.904567@1] fb: current vmode=1600x1200p60hz, cmd: 0x10000
  2715. [ 10.904572@1] vlock: event MODE_CHANGE_PRE 0
  2716. [ 10.904597@1] hdmitx: hdmitx_set_current_vmode[4728]
  2717. [ 10.904604@1] hdmitx: system: recalc before 1600x1200p60hz 60 1
  2718. [ 10.904607@1] hdmitx: system: recalc after 1600x1200p60hz 2997 50
  2719. [ 10.904614@1] hdmitx: system: get current mode: 1600x1200p60hz
  2720. [ 10.904617@1] hdmitx: system: update physcial size: 520 320
  2721. [ 10.904664@1] hdmitx: video: already init VIC = 0 Now VIC = 789
  2722. [ 10.904668@1] hdmitx: hdmitx: VESA only support RGB format
  2723. [ 10.904670@1] hdmitx: hw: div40: 0
  2724. [ 10.935912@3] hdmitx: frac_rate = 1
  2725. [ 10.935918@3] hdmitx: config HPLL = 1620000 frac_rate = 1
  2726. [ 10.935972@3] hdmitx: HPLL: 0xdb000486
  2727. [ 10.935973@3] hdmitx: config HPLL done
  2728. [ 10.935989@3] hdmitx: hdmitx_set_clk[643] div = 6
  2729. [ 10.935994@3] hdmitx: j = 22 vid_clk_div = 2
  2730. [ 10.936003@3] hdmitx: set enc for VIC: 789
  2731. [ 10.977905@2] hdmitx: hw: config hdmitx IP vic = 789 cd:4 cs: 0
  2732. [ 10.988396@2] hdmitx: video: Sink is HDMI device
  2733. [ 10.988430@2] hdmitx: hw: set audio
  2734. [ 10.988435@2] hdmitx: hw: hdmitx tx_aud_src = 0
  2735. [ 10.988446@2] hdmitx: fs = 0, cd = 4, tmds_clk = 162000
  2736. [ 10.988448@2] hdmitx: hw: aud_n_para = 6144
  2737. [ 10.988455@2] hdmitx: hw: set channel status
  2738. [ 10.988467@2] hdmitx: hw: [0x10e3] = 0x1f
  2739. [ 10.988487@2] hdmitx: system: update rx hdr info 0
  2740. [ 10.988491@2] vout: new mode 1600x1200p60hz set ok
  2741. [ 10.988494@2] fb: current vmode=1600x1200p60hz, cmd: 0x20000
  2742. [ 10.988500@2] fb: outputmode changed to 1600x1200p60hz, reset osd0, (0, 0, 1919, 1199) -> (0, 0, 1599, 1199)
  2743. [ 10.989061@0] hdmitx: system: irq 80000001 0
  2744. [ 11.021791@5] fb: osd[0] enable: 1 (systemcontrol)
  2745. [ 11.082656@4] cpufreq_interactive: hmp boost cpu:0 cluster:1
  2746. [ 11.082658@4] cpufreq_interactive: hmp boost cpu:1 cluster:1
  2747. [ 11.082659@4] cpufreq_interactive: hmp boost cpu:2 cluster:0
  2748. [ 11.082661@4] cpufreq_interactive: hmp boost cpu:3 cluster:0
  2749. [ 11.082662@4] cpufreq_interactive: hmp boost cpu:4 cluster:0
  2750. [ 11.082663@4] cpufreq_interactive: hmp boost cpu:5 cluster:0
  2751. [ 11.082991@4] init: Could not find service hosting interface vendor.amlogic.hardware.hdmicec@1.0::IDroidHdmiCEC/default
  2752. [ 11.084882@1] init: Could not find service hosting interface vendor.amlogic.hardware.systemcontrol@1.0::ISystemControl/default
  2753. [ 11.090003@3] hdmitx: [0x10000103]: 0x00000008
  2754. [ 11.090006@3] hdmitx: [0x10000104]: 0x00000001
  2755. [ 11.090009@3] hdmitx: [0x10000170]: 0x00000010
  2756. [ 11.090011@3] hdmitx: [0x10000180]: 0x000000ff
  2757. [ 11.090012@3] hdmitx: [0x10000181]: 0x000000ff
  2758. [ 11.090014@3] hdmitx: [0x10000182]: 0x00000003
  2759. [ 11.090015@3] hdmitx: [0x10000183]: 0x00000007
  2760. [ 11.090016@3] hdmitx: [0x10000184]: 0x0000003f
  2761. [ 11.090018@3] hdmitx: [0x10000185]: 0x00000002
  2762. [ 11.090020@3] hdmitx: [0x10000187]: 0x000000ff
  2763. [ 11.090021@3] hdmitx: [0x10000188]: 0x00000003
  2764. [ 11.171046@2] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.
  2765. [ 11.171047@2]
  2766. [ 11.171232@2] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
  2767. [ 11.171233@2]
  2768. [ 11.183726@5] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.
  2769. [ 11.183726@5]
  2770. [ 11.183809@5] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
  2771. [ 11.183810@5]
  2772. [ 11.245089@0] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE
  2773. [ 11.251314@0] vlock: event MODE_CHANGE
  2774. [ 11.267147@4] init: Could not find service hosting interface vendor.amlogic.hardware.systemcontrol@1.1::ISystemControl/default
  2775. [ 11.273616@4] init: Could not find service hosting interface vendor.amlogic.hardware.hdmicec@1.0::IDroidHdmiCEC/default
  2776. [ 11.283925@3] init: setpgid failed for console: Operation not permitted
  2777. [ 11.284176@4] init: Could not find service hosting interface android.hardware.graphics.composer@2.1::IComposer/default
  2778. [ 11.284576@4] init: Could not find service hosting interface android.hardware.graphics.composer@2.1::IComposer/default
  2779. [ 11.293909@5] vout: aml_tvout_mode_work: monitor stop
  2780. [ 11.297894@1] init: couldn't write 3547 to /dev/cpuset/camera-daemon/tasks: No such file or directory
  2781. [ 11.313227@2] init: Failed to open file '/d/mmc0/mmc0:0001/ext_csd': No such file or directory
  2782. [ 11.320370@2] init: Could not find service hosting interface vendor.amlogic.hardware.systemcontrol@1.0::ISystemControl/default
  2783. [ 11.347397@3] read descriptors
  2784. [ 11.347403@3] read strings
  2785. console:/ $ [ 11.406972@3] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.
  2786. [ 11.412932@3] aml_tdm_open
  2787. [ 11.417894@5]
  2788. [ 11.417986@4] loopback_dai_startup
  2789. [ 11.422425@4] loopback_dai_shutdown
  2790. [ 11.422823@4] aml_tdm_open
  2791. [ 11.428228@4] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[ 11.430961@4] aml_tdm_open
  2792. [ 11.437761@4] aml_spdif_open
  2793. [ 11.442227@5] [Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
  2794. [ 11.442408@2] aml_spdif_close
  2795. [ 11.458697@5]
  2796. [ 11.463626@5] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#0] format 0x00000000 is not supported, setting default format 0x34424752.
  2797. [ 11.465824@3] vout: vout_io_open
  2798. [ 11.481918@4]
  2799. [ 11.482112@4] isp_v4l2_stream_try_format@:1321 GENERIC(CRIT) :[Stream#2] format 0x00000000 is not supported, setting default format 0x34424752.
  2800. [ 11.494041@4]
  2801. [ 11.588538@1] [DI] load 0x3e00 pq table len 424 later.
  2802. [ 11.759586@3] avc open
  2803. [ 11.759607@3] amvenc_avc check CMA pool success, max instance: 3.
  2804. [ 11.763435@2] allocating phys 0x5a400000, size 20480k, wq:eba29000.
  2805. [ 11.768834@2] amvenc_avc memory config success, buff start:0x5a400000, size is 0x1400000, wq:eba29000.
  2806. [ 11.778208@2] avc release, wq:eba29000
  2807. [ 11.781862@2] remove encode_work_queue eba29000 success, _destroy_encode_work_queue line 3773.
  2808. [ 11.790791@2] [+] vpu_open
  2809. [ 11.794438@2] allocating phys 0x5a400000, virt addr 0x0, size 65536k
  2810. [ 11.799765@2] [-] vpu_open, ret: 0
  2811. [ 11.802918@2] vpu_release
  2812. [ 11.805474@2] vpu_free_buffers
  2813. [ 11.808554@2] vpu_free_instances
  2814. [ 11.811730@2] vpu_release, s_video_memory 0x5a400000
  2815. [ 11.870465@0] vout: vout_io_open
  2816. [ 11.870516@0] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  2817. [ 11.873744@0] vout: vout_io_release
  2818. [ 11.884642@1] vout: vout_io_open
  2819. [ 11.884698@1] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  2820. [ 11.888561@0] vout: vout_io_release
  2821. [ 12.860005@3] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
  2822. [ 12.902254@4] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3445_2)
  2823. [ 12.902788@4] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3445_2)
  2824. [ 12.921838@0] fb: free_scale_switch to fb0, mode: 0x10001
  2825. [ 12.922047@1] fb: set logo loaded
  2826. [ 13.079825@3] Now can use cma, free:799, wm:1341
  2827. [ 13.676880@3] early_suspend_state=0
  2828. [ 14.228675@0] healthd: battery l=100 v=4 t=0.0 h=2 st=2 c=1 fc=10000000 chg=u
  2829. [ 14.231687@5] healthd: battery l=100 v=4 t=0.0 h=2 st=2 c=1 fc=10000000 chg=u
  2830. [ 14.245206@4] healthd: battery l=100 v=4 t=0.0 h=2 st=2 c=1 fc=10000000 chg=u
  2831. [ 14.332430@5] type=1400 audit(1622518080.232:53): avc: denied { getattr } for pid=3444 comm="allocator@2.0-s" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=16407 scontext=u:r:hal_graphics_allocator_default:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1
  2832. [ 14.352968@5] type=1400 audit(1622518082.580:54): avc: denied { read } for pid=3700 comm="system_server" name="hctosys" dev="sysfs" ino=18211 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  2833. [ 14.372687@5] type=1400 audit(1622518082.580:54): avc: denied { read } for pid=3700 comm="system_server" name="hctosys" dev="sysfs" ino=18211 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  2834. [ 14.392469@5] type=1400 audit(1622518082.580:55): avc: denied { open } for pid=3700 comm="system_server" path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/hctosys" dev="sysfs" ino=18211 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  2835. [ 14.491889@4] type=1400 audit(1622518082.580:55): avc: denied { open } for pid=3700 comm="system_server" path="/sys/devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-0051/rtc/rtc0/hctosys" dev="sysfs" ino=18211 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  2836. [ 14.512964@4] type=1400 audit(1622518082.740:56): avc: denied { read } for pid=3700 comm="android.ui" name="state" dev="sysfs" ino=10283 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  2837. [ 14.533345@4] type=1400 audit(1622518082.740:56): avc: denied { read } for pid=3700 comm="android.ui" name="state" dev="sysfs" ino=10283 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  2838. [ 14.553492@4] type=1400 audit(1622518082.740:57): avc: denied { open } for pid=3700 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10283 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  2839. [ 14.577730@4] type=1400 audit(1622518082.740:57): avc: denied { open } for pid=3700 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10283 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  2840. [ 14.601864@4] type=1400 audit(1622518082.740:58): avc: denied { getattr } for pid=3700 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10283 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
  2841. [ 14.782069@5] acc_open
  2842. [ 14.782095@5] acc_release
  2843. [ 15.083074@5] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
  2844. [ 15.084540@5] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  2845. [ 15.160716@2] sdcardfs version 2.0
  2846. [ 15.160744@2] sdcardfs: dev_name -> /data/media
  2847. [ 15.163231@2] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
  2848. [ 15.173667@2] sdcardfs: mnt -> eac01810
  2849. [ 15.177527@2] sdcardfs: mounted on top of /data/media type ext4
  2850. [ 15.184013@2] Remount options were mask=23,gid=9997 for vfsmnt eac01610.
  2851. [ 15.190062@2] sdcardfs : options - debug:1
  2852. [ 15.194082@2] sdcardfs : options - gid:9997
  2853. [ 15.198229@2] sdcardfs : options - mask:23
  2854. [ 15.202771@2] Remount options were mask=7,gid=9997 for vfsmnt eebe4010.
  2855. [ 15.208903@2] sdcardfs : options - debug:1
  2856. [ 15.212989@2] sdcardfs : options - gid:9997
  2857. [ 15.217112@2] sdcardfs : options - mask:7
  2858. [ 15.299066@4] audit: audit_lost=31 audit_rate_limit=5 audit_backlog_limit=64
  2859. [ 15.300476@4] audit: rate limit exceeded
  2860. [ 15.613337@1] aml_wifi wifi: [usb_power_control] Set WiFi power down
  2861. [ 15.614521@1] meson-mmc: [sdio_notify] finish
  2862. [ 15.776528@5] audio_dsp: dts_dec_control/0x0
  2863. [ 15.809930@3] BT_RADIO going: on
  2864. [ 15.809957@3] AML_BT: going ON
  2865. [ 15.832857@2] aml_wifi wifi: [usb_power_control] Set WiFi power on !
  2866. [ 15.937189@2] sensors 4-000e: set sensor poll time to 66ms
  2867. [ 15.938580@2] sensors 4-000e: sensor on: starting poll sensor data 64ms
  2868. [ 16.041954@4] meson-mmc: [sdio_notify] finish
  2869. [ 16.043226@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  2870. [ 16.047275@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  2871. [ 16.054719@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  2872. [ 16.060275@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  2873. [ 16.072905@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  2874. [ 16.073885@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  2875. [ 16.101956@4] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  2876. [ 16.102078@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  2877. [ 16.128977@4] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  2878. [ 16.131785@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  2879. [ 16.138314@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  2880. [ 16.150440@4] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  2881. [ 16.156579@4] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  2882. [ 16.226189@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
  2883. [ 16.228672@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
  2884. [ 16.236892@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
  2885. [ 16.249568@5] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
  2886. [ 16.283354@4] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  2887. [ 16.287605@4] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  2888. [ 16.293592@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
  2889. [ 16.300086@4] meson-mmc: Data 1 aligned delay is 0
  2890. [ 16.304815@4] meson-mmc: sdio: clk 199999997 tuning start
  2891. [ 16.319175@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  2892. [ 16.319205@4] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
  2893. [ 16.335280@4] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  2894. [ 16.335317@4] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
  2895. [ 16.352339@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2896. [ 16.352370@4] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
  2897. [ 16.371836@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2898. [ 16.371869@4] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
  2899. [ 16.390920@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2900. [ 16.390951@4] meson-mmc: step:20, delay1:0x14514514, delay2:0x14014514
  2901. [ 16.403126@4] meson-mmc: sdio: adj_win: < 0 2 3 4 >
  2902. [ 16.403155@4] meson-mmc: left:3, right:0, mid:4, size:4
  2903. [ 16.407684@4] meson-mmc: step:0, delay1:0x0, delay2:0x0
  2904. [ 16.412833@4] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  2905. [ 16.421210@4] meson-mmc: delay1:0x0, delay2:0x0
  2906. [ 16.431530@4] sdio: new ultra high speed SDR104 SDIO card at address 0001
  2907. [ 16.432680@4] sdio: clock 199999997, 4-bit-bus-width
  2908. [ 16.438449@3] meson-mmc: [sdio_reinit] finish
  2909. [ 16.442443@3] aml_wifi wifi: [usb_power_control] Set WiFi power on !
  2910. [ 16.448488@3] aml_wifi wifi: [pci_reinit] pci wifi reinit!
  2911. [ 16.453918@3] aml_wifi wifi: [wifi_power_ioctl] Set sdio wifi power up!
  2912. [ 16.461340@3] aml_wifi wifi: [wifi_power_ioctl] wifi interface dev type: sdio, length = 4
  2913. [ 16.499404@2] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
  2914. [ 16.503125@2] [dhd] ======== dhd_wlan_init_plat_data ========
  2915. [ 16.508886@2] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=86, oob_irq_flags=0x418
  2916. [ 16.516931@2] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
  2917. [ 16.521819@2] [dhd] dhd_wifi_platform_load: Enter
  2918. [ 16.526569@2] [dhd] Power-up adapter 'DHD generic adapter'
  2919. [ 16.532003@2] [dhd] wifi_platform_set_power = 1, delay: 200 msec
  2920. [ 16.537955@2] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
  2921. [ 16.543859@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
  2922. [ 16.698596@5] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
  2923. [ 16.750467@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
  2924. [ 16.906368@5] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
  2925. [ 17.257895@5] [dhd] wifi_platform_bus_enumerate device present 1
  2926. [ 17.258268@5] [dhd] ======== Card detection to detect SDIO card! ========
  2927. [ 17.265077@5] sdio_reset_comm():
  2928. [ 17.268311@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  2929. [ 17.274032@5] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  2930. [ 17.306025@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  2931. [ 17.306152@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  2932. [ 17.332120@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  2933. [ 17.335034@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  2934. [ 17.340593@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  2935. [ 17.348445@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  2936. [ 17.355271@2] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  2937. [ 17.450610@4] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  2938. [ 17.454770@4] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  2939. [ 17.460763@4] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
  2940. [ 17.467322@4] meson-mmc: Data 1 aligned delay is 0
  2941. [ 17.472083@4] meson-mmc: sdio: clk 199999997 tuning start
  2942. [ 17.484923@0] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  2943. [ 17.484958@0] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
  2944. [ 17.500515@0] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  2945. [ 17.500551@0] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
  2946. [ 17.517186@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2947. [ 17.517221@0] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
  2948. [ 17.536602@4] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2949. [ 17.536635@4] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
  2950. [ 17.551202@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  2951. [ 17.551236@0] meson-mmc: step:20, delay1:0x14514514, delay2:0x14014514
  2952. [ 17.566294@4] meson-mmc: sdio: adj_win: < 0 2 3 4 >
  2953. [ 17.566327@4] meson-mmc: left:3, right:0, mid:4, size:4
  2954. [ 17.570774@4] meson-mmc: step:0, delay1:0x0, delay2:0x0
  2955. [ 17.575976@4] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  2956. [ 17.584690@4] meson-mmc: delay1:0x0, delay2:0x0
  2957. [ 17.588925@4] meson-mmc: [sdio_reinit] finish
  2958. [ 17.610066@2] [dhd] bcmsdh_register: register client driver
  2959. [ 17.610260@2] [dhd] bcmsdh_sdmmc_probe: Enter num=1
  2960. [ 17.615092@2] [dhd] bcmsdh_sdmmc_probe: Enter num=2
  2961. [ 17.622800@4] [dhd] bus num (host idx)=2, slot num (rca)=1
  2962. [ 17.625171@4] [dhd] found adapter info 'DHD generic adapter'
  2963. [ 17.630863@4] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
  2964. [ 17.636765@4] succeed to alloc static buf
  2965. [ 17.640735@4] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
  2966. [ 17.646331@1] [dhd] sdioh_attach: set sd_f2_blocksize 256
  2967. [ 17.651694@2] [dhd] sdioh_attach: sd clock rate = 0
  2968. [ 17.657621@3] [dhd] dhdsdio_probe : no mutex held. set lock
  2969. [ 17.662296@2] [dhd] F1 signature read @0x18000000=0x17294359
  2970. [ 17.676989@4] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  2971. [ 17.680296@1] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  2972. [ 17.686226@1] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 25064
  2973. [ 17.691983@2] [dhd] dhd_conf_set_chiprev : chip=0x4359, chiprev=9
  2974. [ 17.698014@2] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
  2975. [ 17.704399@2] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
  2976. [ 17.710216@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2977. [ 17.718332@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2978. [ 17.726499@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2979. [ 17.734747@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2980. [ 17.743194@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2981. [ 17.751605@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2982. [ 17.760012@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2983. [ 17.768429@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2984. [ 17.776809@4] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  2985. [ 17.785373@3] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 65652
  2986. [ 17.791187@3] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 262144
  2987. [ 17.797134@3] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
  2988. [ 17.803470@2] [dhd] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB
  2989. [ 17.814747@2] [dhd] dhd_log_dump_init : Try to allocate memory total(4194304) special(8192)
  2990. [ 17.823039@2] Wifi: bcmdhd_mem_prealloc: sectoin 15, size 4194304
  2991. [ 17.829647@2] Wifi: bcmdhd_mem_prealloc: sectoin 16, size 8192
  2992. [ 17.834998@0] dhd_attach(): thread:dhd_watchdog_thread:1068 started
  2993. [ 17.841416@4] dhd_attach(): thread:dhd_dpc:1069 started
  2994. [ 17.846602@5] dhd_attach(): thread:dhd_rxf:106a started
  2995. [ 17.851510@5] [dhd] dhd_deferred_work_init: work queue initialized
  2996. [ 17.857687@5] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
  2997. [ 17.864939@5] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn't exist
  2998. [ 17.873985@5] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
  2999. [ 17.879694@5] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  3000. [ 17.920746@0] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
  3001. [ 17.920981@0] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
  3002. [ 17.927306@2] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
  3003. [ 17.932976@4] [dhd] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
  3004. [ 17.942619@4] [dhd] Register interface [wlan0] MAC: 18:93:7f:67:58:ec
  3005. [ 17.942619@4]
  3006. [ 17.948252@4] [dhd] dhd_dbg_detach_pkt_monitor, 2099
  3007. [ 17.953016@4] [dhd] dhd_bus_devreset: == Power OFF ==
  3008. [ 17.958892@2] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
  3009. [ 17.963088@2] [dhd] bcmsdh_oob_intr_unregister: Enter
  3010. [ 17.968070@2] [dhd] bcmsdh_oob_intr_unregister: irq is not registered
  3011. [ 17.974487@2] [dhd] dhd_bus_devreset: making dhdpub up FALSE
  3012. [ 17.980095@2] [dhd] dhd_txglom_enable: enable 0
  3013. [ 17.984609@2] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
  3014. [ 17.989965@2] [dhd] dhd_bus_devreset: WLAN OFF DONE
  3015. [ 17.995075@2] [dhd] wifi_platform_set_power = 0, delay: 0 msec
  3016. [ 18.000729@2] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
  3017. [ 18.006465@2] [dhd] dhd_ifname: ifidx 16 out of range
  3018. [ 18.011463@2] [dhd] <if_bad>: set cur_etheraddr failed
  3019. [ 18.016590@2] [dhd] dhd_ifname: ifidx 16 out of range
  3020. [ 18.021614@2] [dhd] dhd_register_if: _dhd_set_mac_address() failed
  3021. [ 18.028368@2] [dhd] Register interface [wlan1] MAC: 1a:93:7f:67:58:ec
  3022. [ 18.028368@2]
  3023. [ 18.035957@2] [dhd] dhdsdio_probe : the lock is released.
  3024. [ 18.041447@2] [dhd] dhd_module_init: Exit err=0
  3025. [ 18.139595@3] [dhd] dhd_open: Enter wlan0
  3026. [ 18.139625@3] [dhd] dhd_open : no mutex held. set lock
  3027. [ 18.144441@3] [dhd]
  3028. [ 18.144441@3] Dongle Host Driver, version 100.10.545.11 (r826445-20200610-1)
  3029. [ 18.152415@3] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
  3030. [ 18.158156@3] [dhd] wifi_platform_set_power = 1, delay: 200 msec
  3031. [ 18.164001@3] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
  3032. [ 18.169915@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
  3033. [ 18.376530@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
  3034. [ 18.881945@0] sdio_reset_comm():
  3035. [ 18.882038@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  3036. [ 18.885301@0] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  3037. [ 18.921985@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  3038. [ 18.922117@5] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x1000023c
  3039. [ 19.065379@1] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
  3040. [ 19.069901@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  3041. [ 19.075982@1] meson-mmc: [meson_mmc_set_ios_v3] after clock: 0x10000245
  3042. [ 19.082136@1] meson-mmc: Data 1 aligned delay is 0
  3043. [ 19.086868@1] meson-mmc: sdio: clk 199999997 tuning start
  3044. [ 19.101919@1] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  3045. [ 19.101952@1] meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
  3046. [ 19.117967@2] meson-mmc: sdio: adj_win: < 1 2 3 4 >
  3047. [ 19.118008@2] meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
  3048. [ 19.135720@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  3049. [ 19.135754@0] meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
  3050. [ 19.154212@0] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  3051. [ 19.154252@0] meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
  3052. [ 19.173239@1] meson-mmc: sdio: adj_win: < 0 1 2 3 4 >
  3053. [ 19.173276@1] meson-mmc: step:20, delay1:0x14514514, delay2:0x14014514
  3054. [ 19.188957@5] meson-mmc: sdio: adj_win: < 0 2 3 4 >
  3055. [ 19.188993@5] meson-mmc: left:3, right:0, mid:4, size:4
  3056. [ 19.193465@5] meson-mmc: step:0, delay1:0x0, delay2:0x0
  3057. [ 19.198636@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  3058. [ 19.207179@5] meson-mmc: delay1:0x0, delay2:0x0
  3059. [ 19.211695@5] [dhd] sdioh_start: set sd_f2_blocksize 256
  3060. [ 19.217610@0] [dhd]
  3061. [ 19.217610@0]
  3062. [ 19.217610@0] dhd_bus_devreset: == Power ON ==
  3063. [ 19.225595@2] [dhd] F1 signature read @0x18000000=0x17294359
  3064. [ 19.239177@0] [dhd] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  3065. [ 19.242051@5] [dhd] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  3066. [ 19.253520@2] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
  3067. [ 19.253657@2] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
  3068. [ 19.260982@3] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/wifi/4359/config.txt
  3069. [ 19.267992@3] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin
  3070. [ 19.277125@3] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/wifi/4359/nvram_ap6398s.txt
  3071. [ 19.286178@3] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
  3072. [ 19.295659@3] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/wifi/4359/config.txt
  3073. [ 19.307895@2] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin (637347 bytes) open success
  3074. [ 19.462344@0] [dhd] dhd_os_open_image1: /vendor/etc/wifi/4359/nvram_ap6398s.txt (5861 bytes) open success
  3075. [ 19.466826@0] [dhd] NVRAM version: AP6398S_NVRAM_V1.1_20170926
  3076.  
  3077. [ 19.474742@5] [dhd] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  3078. [ 19.658843@5] [dhd] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  3079. [ 19.660490@0] [dhd] bcmsdh_oob_intr_register: HW_OOB irq=86 flags=0x8
  3080. [ 19.666530@0] [dhd] get_mem_val_from_file: File [/data/vendor/misc/wifi/.memdump.info] doesn't exist
  3081. [ 19.675756@3] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
  3082. [ 19.682596@1] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1
  3083. [ 19.689423@4] [dhd] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/4359/clm_bcm4359c0_ag.blob
  3084. [ 19.699398@3] [dhd] Firmware up: op_mode=0x0405, MAC=18:93:7f:67:58:ec
  3085. [ 19.713960@0] [dhd] dhd_preinit_ioctls: event_log_max_sets: 26 ret: -23
  3086. [ 19.723309@3] [dhd] Driver: 100.10.545.11 (r826445-20200610-1)
  3087. [ 19.723309@3] Firmware: wl0: Sep 20 2019 20:22:36 version 9.87.51.11.34 (edb7293@shgit) (r711217) FWID 01-c7feb1ee
  3088. [ 19.723309@3] CLM: 9.7.5 (2019-09-20 20:20:47)
  3089. [ 19.740887@3] [dhd] dhd_preinit_ioctls wlc_ver failed -23
  3090. [ 19.744656@1] [dhd] dhd_txglom_enable: enable 1
  3091. [ 19.748785@4] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
  3092. [ 19.755251@4] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
  3093. [ 19.762356@4] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
  3094. [ 19.769897@4] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
  3095. [ 19.777476@4] [dhd] dhd_conf_get_disable_proptx : fw_proptx=0, disable_proptx=1
  3096. [ 19.786361@3] [dhd] dhd_pno_init: Support Android Location Service
  3097. [ 19.818640@1] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  3098. [ 19.821818@5] [dhd] dhd_rtt_init : FTM is not supported
  3099. [ 19.827597@1] [dhd] dhd_rtt_ftm_config : failed to set config
  3100. [ 19.834098@3] [dhd] failed to set WNM capabilities
  3101. [ 19.848935@0] [dhd] dhd_preinit_ioctls: Failed to get preserve log # !
  3102. [ 19.850138@5] [dhd] dhd_conf_map_country_list : CN/38
  3103. [ 19.855138@5] [dhd] dhd_conf_set_country : set country CN, revision 38
  3104. [ 19.863673@0] [dhd] dhd_conf_set_country : Country code: CN (CN/38)
  3105. [ 19.876856@4] [dhd] CONFIG-ERROR) dhd_conf_set_intiovar : txbf setting failed -23
  3106. [ 19.879253@4] [dhd-wlan0] wl_android_wifi_on : Success
  3107. [ 19.933065@1] [dhd] dhd_open : the lock is released.
  3108. [ 19.933101@1] [dhd] dhd_open: Exit wlan0 ret=0
  3109. [ 19.937404@1] [dhd] [wlan0] tx queue started
  3110. [ 19.986804@1] [dhd] P2P interface registered
  3111. [ 19.986836@1] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: df832000, wdev->net: (null)
  3112. [ 20.005521@3] [dhd] WLC_E_IF: NO_IF set, event Ignored
  3113.  
  3114. [ 20.069264@4] [dhd] Random MAC OUI to be used - da:1:19
  3115. [ 20.069348@3] type=1400 audit(1622518084.184:62): avc: denied { ioctl } for pid=3451 comm="HwBinder:3451_1" path="/dev/gsensor" dev="tmpfs" ino=4203 ioctlcmd=0x6110 scontext=u:r:hal_sensors_default:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3116. [ 20.092738@4] type=1400 audit(1622518088.316:63): avc: denied { getattr } for pid=3458 comm="wifi@1.0-servic" path="/data/vendor/wifi/wid_fp" dev="mmcblk0p20" ino=389510 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
  3117. [ 20.123708@5] [dhd] dhd_dbg_attach_pkt_monitor, 1501
  3118. [ 20.125243@3] [dhd] net_os_enable_packet_filter: val = 0
  3119. [ 20.129126@3] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 2
  3120. [ 20.136493@4] [dhd] net_os_enable_packet_filter: val = 1
  3121. [ 20.140673@5] [dhd] net_os_enable_packet_filter: val = 0
  3122. [ 20.146078@5] [dhd] net_os_rxfilter_add_remove: add_remove = 0, num = 3
  3123. [ 20.153381@4] [dhd] net_os_enable_packet_filter: val = 1
  3124. [ 20.157881@5] [dhd] dhd_set_suspend: Remove extra suspend setting
  3125. [ 20.163896@4] [dhd] dhd_enable_packet_filter: enter, value = 0
  3126. [ 20.274922@0] selinux: avc: denied { set } for property=dhclient.ipaddress.wlan0 pid=3700 uid=1000 gid=1000 scontext=u:r:system_server:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
  3127. [ 20.274922@0]
  3128.  
  3129.  
  3130. console:/ $
  3131.  
  3132. console:/ $
  3133.  
  3134. console:/ $ su[ 22.695094@3] zram0: detected capacity change from 0 to 268435456
  3135. [ 22.711112@5] type=1400 audit(1622518088.316:63): avc: denied { getattr } for pid=3458 comm="wifi@1.0-servic" path="/data/vendor/wifi/wid_fp" dev="mmcblk0p20" ino=389510 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
  3136. [ 22.724553@0] mkswap: Swapspace size: 262140k, UUID=87f2a780-f6f1-410c-a575-eaad5d024d45
  3137. [ 22.731543@4] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
  3138. [ 22.732593@0] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
  3139. [ 22.732593@0]
  3140. [ 22.738225@4] audit: audit_lost=33 audit_rate_limit=5 audit_backlog_limit=64
  3141. [ 22.738227@4] audit: rate limit exceeded
  3142. [ 22.765778@5] type=1400 audit(1622518090.960:64): avc: denied { getattr } for pid=4240 comm="preinstall.sh" path="/data/local/symbol_thirdpart_apks_installed" dev="mmcblk0p20" ino=130074 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
  3143. [ 22.790592@3] type=1400 audit(1622518090.960:64): avc: denied { getattr } for pid=4240 comm="preinstall.sh" path="/data/local/symbol_thirdpart_apks_installed" dev="mmcblk0p20" ino=130074 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
  3144. [ 22.795751@5] reg resource 2, start: ff63c10c,end: ff63c10f
  3145. [ 22.795753@5] reg resource 3, start: ff63c110,end: ff63c113
  3146. [ 22.795754@5] reg resource 4, start: ffd01088,end: ffd0108b
  3147. [ 22.795756@5] reg resource NN_CLK, start: ff63c1c8,end: ff63c1cb
  3148. [ 22.795758@5] npu_version: 2
  3149. [ 22.795807@5] galcore irq number is 53.
  3150. [ 22.795809@5] Galcore version 6.4.4.3.310723
  3151. [ 22.809303@1] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
  3152. [ 22.809303@1]
  3153. [ 22.857268@5] type=1400 audit(1622518090.960:65): avc: denied { create } for pid=4241 comm="cmdserver" scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
  3154. [ 22.873818@5] type=1400 audit(1622518090.960:65): avc: denied { create } for pid=4241 comm="cmdserver" scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
  3155. [ 22.890180@5] type=1400 audit(1622518090.960:66): avc: denied { net_raw } for pid=4241 comm="cmdserver" capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
  3156. [ 22.908342@5] type=1400 audit(1622518090.960:66): avc: denied { net_raw } for pid=4241 comm="cmdserver" capability=13 scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=capability permissive=1
  3157. [ 22.925766@5] type=1400 audit(1622518090.960:67): avc: denied { setopt } for pid=4241 comm="cmdserver" scontext=u:r:cmdserver:s0 tcontext=u:r:cmdserver:s0 tclass=tcp_socket permissive=1
  3158.  
  3159.  
  3160. console:/ # [ 23.519714@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
  3161.  
  3162.  
  3163. console:/ #
  3164.  
  3165. console:/ #
  3166.  
  3167. console:/ #
  3168.  
  3169. console:/ #
  3170.  
  3171. console:/ #
  3172.  
  3173. console:/ #
  3174.  
  3175. console:/ # [ 24.822465@4] audit: audit_lost=42 audit_rate_limit=5 audit_backlog_limit=64
  3176. [ 24.826797@2] audit: rate limit exceeded
  3177. [ 24.870845@2] [dhd] CFG80211-ERROR) wl_set_wsec_info_algos : wsec_info error (-23)
  3178. [ 24.879567@4] [dhd-wlan0] wl_cfg80211_connect : Connecting with 40:b0:76:38:0f:14 ssid "BOXS", len (4), sec=wpa2psk/mfpn/aes, channel=44
  3179. [ 24.879567@4]
  3180. [ 24.890402@5] [dhd] dhd_dbg_start_pkt_monitor, 1621
  3181. [ 24.892706@5] [dhd] __dhd_dbg_free_tx_pkts, 1412
  3182. [ 24.897272@5] [dhd] __dhd_dbg_free_rx_pkts, 1431
  3183. [ 24.925887@2] [dhd-wlan0] wl_iw_event : Link UP with 40:b0:76:38:0f:14
  3184. [ 24.926887@2] [dhd-wlan0] wl_ext_iapsta_event : [S] Link UP with 40:b0:76:38:0f:14
  3185. [ 24.940486@4] [dhd-wlan0] wl_bss_connect_done : Report connect result - connection succeeded
  3186.  
  3187.  
  3188. [ 24.976849@4] [dhd-wlan0] wl_add_keyext : key index (0)
  3189. [ 24.979421@1] [dhd] CFG80211-ERROR) wl_set_wsec_info_algos : wsec_info error (-23)
  3190. [ 24.990357@5] [dhd] CFG80211-ERROR) wl_set_wsec_info_algos : wsec_info error (-23)
  3191. console:/ # [ 25.014998@1] [dhd] dhd_dev_apf_get_version: firmware doesn't support APF
  3192. [ 25.016193@1] [dhd] dhd_dev_apf_get_max_len: firmware doesn't support APF
  3193. [ 25.052799@2] [dhd] net_os_enable_packet_filter: val = 0
  3194. [ 25.053614@3] [dhd] net_os_rxfilter_add_remove: add_remove = 1, num = 2
  3195. [ 25.063380@0] [dhd] net_os_enable_packet_filter: val = 1
  3196. [ 25.173934@0] Process ip granted CAP_NET_ADMIN from Android group net_admin.
  3197. [ 25.175351@0] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
  3198. [ 25.184285@0] Implicit grants are deprecated and will be removed in the future.
  3199. [ 25.195421@0] Process ip granted CAP_NET_ADMIN from Android group net_admin.
  3200. [ 25.197626@0] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
  3201. [ 25.199925@5] sensors 4-000e: set sensor poll time to 66ms
  3202. [ 25.210894@0] Implicit grants are deprecated and will be removed in the future.
  3203. [ 25.218692@2] [dhd] dhd_set_suspend: Remove extra suspend setting
  3204. [ 25.226294@3] [dhd] dhd_enable_packet_filter: enter, value = 0
  3205. [ 25.244402@3] Process ip granted CAP_NET_ADMIN from Android group net_admin.
  3206. [ 25.245818@3] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
  3207. [ 25.254455@1] Implicit grants are deprecated and will be removed in the future.
  3208. [ 25.324478@1] selinux: avc: denied { set } for property=vendor.netid.wlan0 pid=3423 uid=0 gid=0 scontext=u:r:netd:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1
  3209. [ 25.324478@1]
  3210.  
  3211.  
  3212. console:/ # [ 25.646602@3] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
  3213.  
  3214.  
  3215. console:/ #
  3216.  
  3217. console:/ # [ 25.867254@5] type=1400 audit(1622518093.072:85): avc: denied { open } for pid=3976 comm="oid.tv.settings" path="/sys/class/fan/enable" dev="sysfs" ino=17582 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3218. [ 25.879431@2] audit: audit_lost=188 audit_rate_limit=5 audit_backlog_limit=64
  3219. [ 25.879433@2] audit: rate limit exceeded
  3220. [ 25.893934@5] type=1400 audit(1622518094.116:232): avc: denied { read } for pid=3913 comm="Thread-2" name="cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3221. [ 25.913653@5] type=1400 audit(1622518094.116:232): avc: denied { read } for pid=3913 comm="Thread-2" name="cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3222. [ 25.933197@5] type=1400 audit(1622518094.116:233): avc: denied { open } for pid=3913 comm="Thread-2" path="/sys/class/camera/cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3223. [ 25.954473@5] type=1400 audit(1622518094.116:233): avc: denied { open } for pid=3913 comm="Thread-2" path="/sys/class/camera/cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3224. [ 25.975894@1] type=1400 audit(1622518094.116:234): avc: denied { getattr } for pid=3913 comm="Thread-2" path="/sys/class/camera/cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3225. [ 25.996855@1] type=1400 audit(1622518094.116:234): avc: denied { getattr } for pid=3913 comm="Thread-2" path="/sys/class/camera/cam_state" dev="sysfs" ino=25865 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  3226. [ 26.017592@3] type=1400 audit(1622518094.128:235): avc: denied { write } for pid=4775 comm="dhclient" path="socket:[33309]" dev="sockfs" ino=33309 scontext=u:object_r:dhclient_exec:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=unix_dgram_socket permissive=1
  3227. [ 26.040623@3] type=1400 audit(1622518094.128:235): avc: denied { write } for pid=4775 comm="dhclient" path="socket:[33309]" dev="sockfs" ino=33309 scontext=u:object_r:dhclient_exec:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=unix_dgram_socket permissive=1
  3228. [ 26.063596@3] type=1400 audit(1622518094.128:236): avc: denied { sendto } for pid=4775 comm="dhclient" path="/dev/socket/logdw" scontext=u:object_r:dhclient_exec:s0 tcontext=u:r:logd:s0 tclass=unix_dgram_socket permissive=1
  3229.  
  3230.  
  3231. console:/ #
  3232.  
  3233. console:/ #
  3234.  
  3235. console:/ #
  3236.  
  3237. console:/ #
  3238.  
  3239. console:/ #
  3240.  
  3241. console:/ #
  3242.  
  3243. console:/ # wm size
  3244.  
  3245. Physical size: 1600x1200
  3246. console:/ # cat .dev. /dev/ck la sys/cl[ 43.534926@0] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
  3247. [ 43.607413@0] type=1400 audit(1622518096.308:240): avc: denied { getattr } for pid=3458 comm="wifi@1.0-servic" path="/data/vendor/wifi/wid_fp" dev="mmcblk0p20" ino=389510 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
  3248. [ 43.626206@0] type=1400 audit(1622518111.856:241): avc: denied { search } for pid=3700 comm="CpuTracker" name="4775" dev="proc" ino=17249 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=dir permissive=1
  3249. [ 43.646497@0] type=1400 audit(1622518111.856:241): avc: denied { search } for pid=3700 comm="CpuTracker" name="4775" dev="proc" ino=17249 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=dir permissive=1
  3250. [ 43.666278@0] type=1400 audit(1622518111.856:242): avc: denied { read } for pid=3700 comm="CpuTracker" name="stat" dev="proc" ino=23406 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=file permissive=1
  3251. [ 43.686455@0] type=1400 audit(1622518111.856:242): avc: denied { read } for pid=3700 comm="CpuTracker" name="stat" dev="proc" ino=23406 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=file permissive=1
  3252. [ 43.706405@2] type=1400 audit(1622518111.856:243): avc: denied { open } for pid=3700 comm="CpuTracker" path="/proc/4775/stat" dev="proc" ino=23406 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=file permissive=1
  3253. [ 43.888888@0] type=1400 audit(1622518111.856:243): avc: denied { open } for pid=3700 comm="CpuTracker" path="/proc/4775/stat" dev="proc" ino=23406 scontext=u:r:system_server:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=file permissive=1
  3254. [ 43.904738@0] type=1400 audit(1622518112.136:244): avc: denied { search } for pid=3448 comm="memtrack@1.0-se" name="3431" dev="proc" ino=4400 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
  3255. [ 43.913541@3] audit: audit_lost=191 audit_rate_limit=5 audit_backlog_limit=64
  3256. [ 43.913542@3] audit: rate limit exceeded
  3257. [ 43.937487@0] type=1400 audit(1622518112.136:244): avc: denied { search } for pid=3448 comm="memtrack@1.0-se" name="3431" dev="proc" ino=4400 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
  3258. [ 43.958183@0] type=1400 audit(1622518112.136:245): avc: denied { read } for pid=3448 comm="memtrack@1.0-se" name="status" dev="proc" ino=33634 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
  3259.  
  3260. console:/ # cat /sys/class/ dis
  3261.  
  3262. display/ display2/
  3263.  
  3264. console:/ # cat /sys/class/display /mode
  3265.  
  3266. 1600x1200p60hz
  3267. console:/ #
  3268. console:/ # cat /sys/class/display/mode
  3269. console:/ # wm size
  3270.  
  3271. Physical size: 1600x1200
  3272. console:/ #
  3273.  
  3274. console:/ #
  3275.  
  3276. console:/ #
  3277.  
  3278. console:/ #
  3279.  
  3280. console:/ #
  3281.  
  3282. console:/ #
  3283.  
  3284. console:/ # reboot
  3285.  
  3286. [ 52.967307@0] type=1400 audit(1622518114.400:286): avc: denied { getattr } for pid=3458 comm="wifi@1.0-servic" path="/data/vendor/wifi/wid_fp" dev="mmcblk0p20" ino=389510 scontext=u:r:hal_wifi_default:s0 tcontext=u:object_r:vendor_data_file:s0 tclass=file permissive=1
  3287. [ 52.986685@1] type=1400 audit(1622518121.216:287): avc: denied { getpgid } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=process permissive=1
  3288. [ 52.989583@2] watchdogd: watchdogd started (interval 10, margin 20)!
  3289. [ 52.989655@2] meson_wdt ffd0f0d0.watchdog: start watchdog
  3290. [ 52.989668@2] meson_wdt ffd0f0d0.watchdog: set timeout
  3291. [ 52.992564@5] [dhd-wlan0] wl_cfg80211_disconnect : Reason 3, act 1
  3292. [ 52.992571@5] [dhd] dhd_dbg_stop_pkt_monitor, 1859
  3293. [ 52.994657@3] [dhd] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
  3294. [ 52.994672@3] [dhd] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
  3295. [ 52.994679@2] [dhd-wlan0] wl_iw_event : [0 times] disconnected with 40:b0:76:38:0f:14, event 11, reason 8
  3296. [ 52.994681@3] [dhd] CFG80211-ERROR) wl_notify_connect_status : link down--clearing disconnect IEs
  3297. Te[ 52.994706@2] [dhd-wlan0] wl_ext_iapsta_event : [S] Link down with 40:b0:76:38:0f:14, WLC_E_DISASSOC(11), reason 8
  3298. [ 52.994713@2] [dhd-wlan0] wl_iw_event : Link Down with 40:b0:76:38:0f:14, reason=2
  3299. [ 52.994721@2] [dhd-wlan0] wl_ext_iapsta_event : [S] Link down with 40:b0:76:38:0f:14, WLC_E_LINK(16), reason 2
  3300. [ 53.026088@2] [dhd] dhd_dbg_stop_pkt_monitor, 1859
  3301. [ 53.095702@4] type=1400 audit(1622518121.216:287): avc: denied { getpgid } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=process permissive=1
  3302. [ 53.111840@4] type=1400 audit(1622518121.232:288): avc: denied { signal } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=process permissive=1
  3303. [ 53.128059@4] type=1400 audit(1622518121.232:288): avc: denied { signal } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:dhclient_exec:s0 tclass=process permissive=1
  3304. [ 53.144187@4] type=1400 audit(1622518121.296:289): avc: denied { sigchld } for pid=1 comm="init" scontext=u:object_r:dhclient_exec:s0 tcontext=u:r:init:s0 tclass=process permissive=1
  3305. rminated
  3306.  
  3307. 143|console:/ # [ 53.226392@4] vout: vout_io_release
  3308. [ 53.227761@4] binder: release 3451:3763 transaction 43149 in, still active
  3309. [ 53.231132@4] binder: send failed reply for transaction 43149 to 3700:3766
  3310. [ 53.373222@0] libprocessgroup: Failed to kill process cgroup uid 0 pid 3424 in 220ms, 1 processes remain
  3311. [ 53.382297@3] binder: undelivered TRANSACTION_COMPLETE
  3312. [ 53.382327@3] binder: undelivered TRANSACTION_ERROR: 29189
  3313. [ 53.387709@3] binder: undelivered TRANSACTION_COMPLETE
  3314. [ 53.393861@3] binder: undelivered transaction 43151, process died.
  3315. [ 53.398992@3] binder: undelivered death notification, 0000000087ead900
  3316. [ 53.406996@3] binder: undelivered death notification, 0000000087971f00
  3317. [ 53.653908@0] [dhd] CFG80211-ERROR) wl_cfg80211_disconnect : Clearing disconnect IEs
  3318. [ 53.656295@0] [dhd] [wlan0] tx queue stopped
  3319. [ 53.660592@0] [dhd] dhd_stop: Enter wlan0
  3320. [ 53.664369@0] [dhd] dhd_stop: ######### dhd_stop called for ifidx=0 #########
  3321. [ 53.671622@0] [dhd] dhd_stop: making dhdpub up FALSE
  3322. [ 53.679722@2] [dhd] WLC_E_IF: NO_IF set, event Ignored
  3323.  
  3324. [ 53.679738@0] [dhd] CFG80211-ERROR) wl_cfgp2p_down : Clean up the p2p discovery IF
  3325. [ 53.689157@2] [dhd] dhd_rx_frame: net device is NOT registered. drop event packet
  3326. [ 53.705911@3] [dhd] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered
  3327. [ 53.708361@3] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 1 -> mode 0
  3328. [ 53.715643@3] [dhd-wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1
  3329. [ 53.735420@5] [dhd] dhd_dbg_detach_pkt_monitor, 2099
  3330. [ 53.735444@5] [dhd] __dhd_dbg_free_tx_pkts, 1412
  3331. [ 53.739331@5] [dhd] __dhd_dbg_free_rx_pkts, 1431
  3332. [ 53.744010@5] [dhd] dhd_bus_devreset: == Power OFF ==
  3333. [ 53.749231@0] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
  3334. [ 53.754186@0] [dhd] bcmsdh_oob_intr_unregister: Enter
  3335. [ 53.759192@0] [dhd] dhd_bus_devreset: making dhdpub up FALSE
  3336. [ 53.764739@2] [dhd] dhd_txglom_enable: enable 0
  3337. [ 53.769159@2] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
  3338. [ 53.774533@2] [dhd] dhd_bus_devreset: WLAN OFF DONE
  3339. [ 53.779568@0] [dhd] wifi_platform_set_power = 0, delay: 0 msec
  3340. [ 53.785318@2] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
  3341. [ 53.791002@2] [dhd-wlan0] wl_android_wifi_off : out
  3342. [ 53.795854@2] [dhd] dhd_stop: Exit wlan0
  3343. [ 53.818836@4] binder: 4210:4210 transaction failed 29189/-22, size 116-8 line 3121
  3344. [ 53.949716@2] binder: 3331:3331 transaction failed 29189/-22, size 88-0 line 3121
  3345. [ 54.136480@0] android_work: did not send uevent (0 0 (null))
  3346. [ 54.142589@3] logd: 58 output lines suppressed due to ratelimiting
  3347. [ 55.497578@3] hdmitx: hw: avmute set to 2
  3348. [ 55.597740@0] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1)
  3349. [ 55.600646@0] aml_spdif_platform_shutdown is mute
  3350. [ 55.604777@2] aml_T9015_audio_remove!
  3351. [ 55.611047@0] amvecm: shutdown module
  3352. [ 55.612644@2] VDIN(1) decode has stopped.
  3353. [ 55.616041@2] vdin_drv_shutdown ok.
  3354. [ 55.619450@2] VDIN(0) decode has stopped.
  3355. [ 55.623494@2] vdin_drv_shutdown ok.
  3356. [ 55.626902@2] di pre hrtimer canel 1.
  3357. [ 55.630537@2] [DI] shutdown done.
  3358. [ 55.633825@2] vout: vout2: aml_vout2_shutdown
  3359. [ 55.642026@3] vout: aml_vout_shutdown
  3360. [ 55.642076@3] fb: osd_shutdown
  3361. [ 55.644855@3] cvbs_out: clk_gate is already off
  3362. [ 55.649387@3] amvdac_drv_shutdown: shutdown module, private_flag:0x0
  3363. [ 55.696464@0] reboot: Restarting system with command 'shell'
  3364. [ 55.696500@0] reboot reason 1
  3365. bl31 reboot reason: 0xd
  3366. bl31 reboot reason: 0x1
  3367. system cmd 1.
  3368.  
  3369. G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
  3370. bl2_stage_init 0x01
  3371. bl2_stage_init 0x81
  3372. hw id: 0x0000 - pwm id 0x01
  3373. bl2_stage_init 0xc1
  3374. bl2_stage_init 0x02
  3375.  
  3376. L0:00000000
  3377. L1:20000703
  3378. L2:00008067
  3379. L3:14000000
  3380. B2:00402000
  3381. B1:e0f83180
  3382.  
  3383. TE: 79452
  3384.  
  3385. BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
  3386.  
  3387. Board ID = 8
  3388. Set A53 clk to 24M
  3389. Set A73 clk to 24M
  3390. Set clk81 to 24M
  3391. A53 clk: 1200 MHz
  3392. A73 clk: 1200 MHz
  3393. CLK81: 166.6M
  3394. smccc: 00017ee8
  3395. eMMC boot @ 0
  3396. sw8 s
  3397. board id: 8
  3398. Load FIP HDR DDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  3399. Get wrong ddr fw magic! Error!!
  3400. fw parse done
  3401. PIEI prepare done
  3402. 00000000
  3403. emmc switch 1 ok
  3404. ddr saved addr:00016000
  3405. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  3406. 00000000
  3407. emmc switch 0 ok
  3408. fastboot data verify
  3409. result: 255
  3410. Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
  3411. LPDDR4 probe
  3412.  
  3413. LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
  3414. ddr clk to 1608MHz
  3415.  
  3416. dmc_version 0001
  3417. Check phy result
  3418. INFO : ERROR : Training has failed!
  3419. Check phy result
  3420. INFO : ERROR : Training has failed!
  3421. Check phy result
  3422. INFO : End of initialization
  3423. INFO : ERROR : Training has failed!
  3424. 1D training failed
  3425. Cfg max: 12, cur: 2. Board id: 255. Force loop cfg
  3426. LPDDR4 probe
  3427. ddr clk to 1608MHz
  3428.  
  3429. dmc_version 0001
  3430. Check phy result
  3431. INFO : End of CA training
  3432. INFO : End of initialization
  3433. INFO : Training has run successfully!
  3434. Check phy result
  3435. INFO : End of initialization
  3436. INFO : End of read enable training
  3437. INFO : End of fine write leveling
  3438. INFO : End of read dq deskew training
  3439. INFO : End of MPR read delay center optimization
  3440. INFO : End of Write leveling coarse delay
  3441. INFO : End of read delay center optimization
  3442. INFO : Training has run successfully!
  3443. Check phy result
  3444. INFO : End of initialization
  3445. INFO : End of MPR read delay center optimization
  3446. INFO : End of write delay center optimization
  3447. INFO : End of read delay center optimization
  3448. INFO : End of max read latency training
  3449. INFO : Training has run successfully!
  3450. 1D training succeed
  3451. Check phy result
  3452. INFO : End of initialization
  3453. INFO : End of 2D read delay Voltage center optimization
  3454. INFO : End of 2D read delay Voltage center optimization
  3455. INFO : End of 2D write delay Voltage center optimization
  3456. INFO : End of 2D write delay Voltage center optimization
  3457. INFO : Training has run successfully!
  3458.  
  3459. soc_vref_reg_value 0x 00000027 00000027 00000026 00000026 00000027 00000027 00000027 00000026 00000027 00000024 00000026 00000028 00000027 00000028 00000025 00000027 00000024 00000026 00000025 00000025 00000025 00000027 00000026 00000025 00000028 00000024 00000025 00000026 00000025 00000025 00000027 00000027 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  3460. dram_vref_reg_value 0x 00000014
  3461. 2D training succeed
  3462. auto size-- 65535DDR cs0 size: 2048MB
  3463. DDR cs1 size: 0MB
  3464. DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
  3465. cs0 DataBus test pass
  3466. cs0 AddrBus test pass
  3467.  
  3468. non-sec scramble use zero key
  3469. ddr scramble enabled
  3470.  
  3471. 100bdlr_step_size ps== 420
  3472. result report
  3473. boot times 3Enable ddr reg access
  3474. 00000000
  3475. emmc switch 3 ok
  3476. Authentication key not yet programmed
  3477. get rpmb counter error 0x00000007
  3478. 00000000
  3479. emmc switch 0 ok
  3480. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  3481. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x0010ac00, part: 0
  3482. 0.0;M3 CHK:0;cm4_sp_mode 0
  3483.  
  3484. [Image: g12b_v1.1.3396-c893a7153 2020-11-11 13:54:36 gongwei.chen@droid11-sz]
  3485.  
  3486. OPS=0x10
  3487.  
  3488. ring efuse init
  3489.  
  3490. chipver efuse init
  3491.  
  3492. 29 0b 10 00 01 1c 0d 00 00 0e 35 37 4d 4d 4e 50
  3493.  
  3494. [0.870583 Inits done]
  3495.  
  3496. secure task start!
  3497. high task start!
  3498. low task start!
  3499. run into bl31
  3500. NOTICE: BL31: v1.3(release):5c909a099
  3501. NOTICE: BL31: Built : 17:18:21, Nov 20 2020
  3502. NOTICE: BL31: G12A normal boot!
  3503. NOTICE: BL31: BL33 decompress pass
  3504. ERROR: Error initializing runtime service opteed_fast
  3505.  
  3506.  
  3507. U-Boot 2015.01-g0ee066b06d-dirty (May 27 2021 - 16:17:37)
  3508.  
  3509. DRAM: 2 GiB
  3510. Relocation Offset is: 76d38000
  3511. mmu cfg end: 0x80000000
  3512. mmu cfg end: 0x80000000
  3513. spi_post_bind(spifc): req_seq = 0
  3514. register usb cfg[0][1] = 0000000077e82640
  3515. aml_i2c_init_port init regs for 0
  3516. MCU version: 0x00 0x03
  3517. MCU version is to low! Doesn't support froce boot from SD card.
  3518. NAND: get_sys_clk_rate_mtd() 292, clock setting 200!
  3519. bus cycle0: 6,timing: 7
  3520. NAND device id: 0 9f ff ff ff ff
  3521. No NAND device found!!!
  3522. nand init failed: -6
  3523. get_sys_clk_rate_mtd() 292, clock setting 200!
  3524. bus cycle0: 6,timing: 7
  3525. NAND device id: 0 9f ff ff ff ff
  3526. No NAND device found!!!
  3527. nand init failed: -6
  3528. MMC: aml_priv->desc_buf = 0x0000000073d28a70
  3529. aml_priv->desc_buf = 0x0000000073d2adb0
  3530. SDIO Port B: 0, SDIO Port C: 1
  3531. co-phase 0x3, tx-dly 0, clock 400000
  3532. co-phase 0x3, tx-dly 0, clock 400000
  3533. co-phase 0x3, tx-dly 0, clock 400000
  3534. emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
  3535. emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
  3536. co-phase 0x3, tx-dly 0, clock 400000
  3537. co-phase 0x1, tx-dly 0, clock 40000000
  3538. [set_emmc_calc_fixed_adj][875]find fixed adj_delay=20
  3539. init_part() 297: PART_TYPE_AML
  3540. [mmc_init] mmc init success
  3541. start dts,buffer=0000000073d2d620,dt_addr=0000000073d2d620
  3542. get_partition_from_dts() 92: ret 0
  3543. parts: 17
  3544. 00: logo0000000000800000 1
  3545. 01: recovery0000000001800000 1
  3546. 02: misc0000000000800000 1
  3547. 03: dtbo0000000000800000 1
  3548. 04: cri_data0000000000800000 2
  3549. 05: param0000000001000000 2
  3550. 06: boot0000000001000000 1
  3551. set has_boot_slot = 0
  3552. 07: rsv0000000001000000 1
  3553. 08: metadata0000000001000000 1
  3554. 09: vbmeta0000000000200000 1
  3555. 10: tee0000000002000000 1
  3556. 11: vendor000000001c000000 1
  3557. 12: odm0000000008000000 1
  3558. 13: system0000000050000000 1
  3559. 14: product0000000008000000 1
  3560. 15: cache0000000046000000 2
  3561. 16: dataffffffffffffffff 4
  3562. init_part() 297: PART_TYPE_AML
  3563. eMMC/TSD partition table have been checked OK!
  3564. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  3565. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  3566. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  3567. mmc env offset: 0x4d400000
  3568. In: serial
  3569. Out: serial
  3570. Err: serial
  3571. reboot_mode=normal
  3572. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  3573. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  3574. _verify_dtb_checksum()-3354: calc 3d37f222, store 3d37f222
  3575. dtb_read()-3569: total valid 2
  3576. update_old_dtb()-3550: do nothing
  3577. aml_i2c_init_port init regs for 0
  3578. fusb302_init: Device ID: 0x91
  3579. CC connected in 0 as UFP
  3580. fusb302 detect chip.port_num = 0
  3581. amlkey_init() enter!
  3582. [EFUSE_MSG]keynum is 1
  3583. vpu: driver version: v20190313
  3584. vpu: detect chip type: 9
  3585. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  3586. vpu: clk_level in dts: 7
  3587. vpu: vpu_power_on
  3588. vpu: set_vpu_clk
  3589. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  3590. vpu: set_vpu_clk finish
  3591. vpu: vpu_module_init_config
  3592. vpp: vpp_init
  3593. vpp: vpp osd2 matrix rgb2yuv..............
  3594. hdr_func 4, hdr_process_select 0x1
  3595. cvbs: cpuid:0x29
  3596. cvbs: find performance_pal config
  3597. LCD_RESET PIN: 0
  3598. lcd: lcd_debug_print flag: 0
  3599. lcd: detect mode: tablet, key_valid: 0
  3600. lcd: detect lcd_clk_path: 1
  3601. lcd: failed to get lcd_cpu_gpio_names
  3602. lcd: load config from dts
  3603. lcd: pinctrl_version: 2
  3604. lcd: use panel_type=lcd_1
  3605. lcd: bl: pinctrl_version: 2
  3606. lcd: bl: name: backlight_pwm, method: 1
  3607. lcd: error: gpio: wrong name invalid
  3608. lcd: bl: pwm_reg=0x00800002
  3609. lcd: bl: aml_bl_power_ctrl: 0
  3610. Net: use internal ethernet
  3611. --------ext_ethernet=0
  3612. +++++++++ext_ethernet=0
  3613. dwmac.ff3f0000 Waiting for PHY auto negotiation to complete.... done
  3614. The Best Window is index 40
  3615. [KM]Msg:isEncrypt=
  3616. [KM]Msg:keyAttr is 0x00000000
  3617. dwmac.ff3f0000amlkey_init() enter!
  3618. amlkey_init() 71: already init!
  3619. [EFUSE_MSG]keynum is 1
  3620.  
  3621. ramdump_init, add:0, size:0
  3622. CONFIG_AVB2: null
  3623. Start read misc partition datas!
  3624. info->magic =
  3625. info->version_major = 1
  3626. info->version_minor = 0
  3627. info->slots[0].priority = 15
  3628. info->slots[0].tries_remaining = 7
  3629. info->slots[0].successful_boot = 0
  3630. info->slots[1].priority = 14
  3631. info->slots[1].tries_remaining = 7
  3632. info->slots[1].successful_boot = 0
  3633. info->crc32 = -1075449479
  3634. active slot = 0
  3635.  
  3636. wipe_data=successful
  3637. wipe_cache=successful
  3638. upgrade_step=2
  3639. reboot_mode:::: normal
  3640. lcd: error: outputmode[1600x1200p60hz] is not support
  3641. hpd_state=1
  3642. do_hpd_detect: hdmimode=1600x1200p60hz
  3643. do_hpd_detect: colorattribute=422,12bit
  3644. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  3645. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  3646. sink preferred_mode is 1080p60hz[16]
  3647. hdmi screen is not single resolution
  3648. hdr mode is 0
  3649. dv mode is ver:0 len: 0
  3650. hdr10+ mode is 0
  3651. Edid_MonitorCapable861: ycbcr444=1, ycbcr422=1
  3652. HDMI_EDID_BLOCK_TYPE_VENDER: pRXCap->ColorDeepSupport=0x38
  3653. read hdmichecksum 0x703e0000, colorattribute 422,12bit
  3654. read hdmimode 1600x1200p60hz, colorspace <NULL>, colordepth <NULL>
  3655. do_get_parse_edid: autoMode = false, manualMode=790
  3656. isYuv4kSink: false, maxTMDSRate=225
  3657. do_get_parse_edid: non-yuv4k sink: inColorSpace: HDMI_COLOR_FORMAT_RGB
  3658. do_get_parse_edid: default inColorDepth: HDMI_COLOR_DEPTH_24B
  3659. TV is same, initial mode is: 1600x1200p60hz attr: 422,12bit
  3660. dolby_status 0
  3661. dolby_status 0
  3662. dolby_vision_process: hpd: dv disabled
  3663. Saving Environment to aml-storage...
  3664. mmc env offset: 0x4d400000
  3665. Writing to MMC(1)... done
  3666. [OSD]load fb addr from dts:/meson-fb
  3667. [OSD]set initrd_high: 0x7f800000
  3668. [OSD]fb_addr for logo: 0x7f800000
  3669. [OSD]load fb addr from dts:/meson-fb
  3670. [OSD]fb_addr for logo: 0x7f800000
  3671. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  3672. [CANVAS]canvas init
  3673. [CANVAS]addr=0x7f800000 width=3840, height=2160
  3674. [OSD]osd_hw.free_dst_data: 0,1599,0,1199
  3675. [OSD]osd1_update_disp_freescale_enable
  3676. cvbs: outputmode[1600x1200p60hz] is invalid
  3677. vpp: vpp_matrix_update: 2
  3678. set hdmitx VIC = 790
  3679. aml_audio_init
  3680. config HPLL = 1620000 frac_rate = 1
  3681. HPLL: 0xdb000486
  3682. config HPLL done
  3683. j = 22 vid_clk_div = 2
  3684. hdmitx: set enc for VIC: 790
  3685. hdmitx phy setting done
  3686. rx version is 2.0 div=10
  3687. hdmtix: set audio
  3688. hdmi_tx_set: save mode: 1600x1200p60hz, attr: 422,12bit, hdmichecksum: 0x703e0000
  3689. hdr_packet
  3690. vpp: hdr_policy = 0
  3691. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  3692. normal power on
  3693. boot wol: disable
  3694. [reg_31] 0xd8a
  3695. [reg_16] 0x0
  3696. [reg_17] 0x7fff
  3697. [reg_19] 0x0
  3698. [reg_31] 0x0
  3699. [reg_31] 0xd40
  3700. [reg_22] 0x0
  3701. [reg_31] 0x0
  3702. saradc: 0x28a, hw_ver: 0x32 (VIM3.V12)
  3703.  
  3704.  
  3705. gpio: pin GPIOAO_7 (gpio 7) value is 1
  3706. port mode is usb3.0
  3707. Command: bcb uboot-command
  3708. Start read misc partition datas!
  3709. BCB hasn't any datas,exit!
  3710. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
  3711. kvim3# printenv outp putmode hdmimode
  3712. outputmode=1600x1200p60hz
  3713. hdmimode=1600x1200p60hz
  3714. kvim3#
  3715. outputmode=1600x1200p60hz
  3716. hdmimode=1600x1200p60hz
  3717. kvim3#
  3718. outputmode=1600x1200p60hz
  3719. hdmimode=1600x1200p60hz
  3720. kvim3#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!