Unitest Management Level Simulator Turbo Diesel 5 cracked

                           Unitest Management Level Simulator Turbo Diesel 5







            This is the full cracked version of the software. Download, extract, install, enjoy.
   Inside the archive there is "crack" folder wich contains everything you need to crack the software.
                                                Download link:
                                  https://safelinking.net/p/baf932f295





Turbo Diesel 5 is a management level simulator which makes the engineer responsible for the operation and maintenance of a marine diesel engine. Turbo Diesel 5 is particularly effective in the teaching how load and other operation conditions affect the engine parameters; fault recognition; breakdowns; and the relationship between engine technical state and the maintenance actions. Turbo Diesel 5 simulates also the influence of the engine technical state on the exhaust emission which is compared with MARPOL limit curve.



Turbo Diesel 5 is an ideal complement to the marine engineer training syllabus. It enhances student's understanding of engine operations, and gives valuable transfer training to more experienced engineers.

Turbo Diesel 5 has been developed to comply with:

    STCW 2010 Code: Table A-III/2, with the following competencies:
    "Manage safe and effective maintenance and repair procedures" including knowledge of planning maintenance and planning repairs.
    "Detect and identify the cause of machinery malfunctions and correct faults" including the location of faults and action to prevent damage, the adjustment of equipment and non-destructive examination.
    STCW Model Course 7.02 Function 3 "Maintenance and repair at the management level".

Turbo Diesel 5 has two main operation modes:

    Evaluation mode (default): The trainee can freely change the technical state of the engine elements as well as the engine load and operation conditions. This includes the possibility of inspecting the present technical state of the engine elements. This mode can be used for testing the relation between the engine operation conditions or the technical state on one side and the engine operation parameters on the other side.
    Live Run mode: Changes in the engine technical state are simulated automatically "in the background" by the computer. The trainee can only perform maintenance and repair activity and change the engine speed, but he cannot control directly the present technical state. The maintenance tasks have their conventional prices and all these expenses will be taken into account later while calculating the final results. The duration of successful diesel operations renders the player certain incomes; so the final result is actually the difference between the global income and the global cost. The Live Run is very useful for diagnostic knowledge assessment.
Turbo Diesel 5 can display:
    Exhaust gas content: The O2, CO, CO2, NOx concentration in the exhaust gases are displayed online. Many faults will influence this content and the additional, customizable fine can be applied in the Live Run mode for the increased emission of NOx which also shown at the MARPOL limit curve.

    Time diagram: The time diagram shows the parameter deviation change as a function of a time. This feature is especially useful in Live Run mode.


Scientific Data: The certain number of calculated engine data like a max. combustion temperature, an air flow, an air/fuel ratio in cylinders or NOx concentration in the single cylinders can be also displayed on request. This data is very useful for the better understanding how the engine faults influence an air pollution and which maintenance strategy should be applied in order to prevent it. The instructor can select a requested information scope which is displayed on the screen. This feature is especially useful for the knowledge assessment.

    Turbo Diesel 5 shows plenty of very useful information when working in the Live Run Mode. Every day of the engine operation brings a certain profit counted in dollars. However, the applied maintenance has to be paid also in dollars and the cost of the necessary but not applied maintenance will added at the end of the live run. The cost of the additional fuel consumption caused by the poor technical state of the engine will be taken into consideration as well. Finally the fine for the additional, unnecessary NOx emission will be counted too. Every emergency stop caused by the engine bad technical state will cause the special fine which like all above mentioned components will influence the final score of the live run. Typically, the score above 60% is necessary in order to pass the automated assessment.
    The Maintenance Expert on the other hand can always suggest necessary maintenance and evaluate which maintenance was necessary but not done. The upper History sub-window shows information about necessary (but not done) and the unnecessary (but done) maintenance. This information is very useful especially when working in Run Replay mode. The lower To Do window shows all maintenance necessary in the current technical state. This feature should be very useful in the Live Run especially, mainly at the early stage of education.
The following engine parameters can be observed in Turbo Diesel 5:

    set engine revolution speed
    set engine load
    actual engine revolution speed
    engine torque
    engine power
    engine specific fuel consumption
    engine mean effective pressure
    cylinder combustion pressure curves (for each cylinder separately)
    fuel pump injection pressure curves (for each cylinder separately)
    cylinder maximum pressure (for each cylinder separately )
    cylinder exhaust gas temperature (for each cylinder separately)
    cylinder mean indication pressure (for each cylinder separately)
    lubricating oil inlet pressure
    lubricating oil inlet temperature
    lubricating oil outlet temperature
    cooling water inlet pressure
    cooling water inlet temperature
    cooling water outlet temperature
    ambient air pressure
    ambient air temperature
    turbocharger revolution speed
    scavenge air pressure
    scavenge air temperature
    air flow
    exhaust gas pressure before turbine
    air pressure drop at the air filter
    air pressure drop at the air cooler
    air temperature after the air cooler
    exhaust gas temperature before turbine
    exhaust gas pressure after turbine



The following simulations can be chosen and mixed in Turbo Diesel 5:

    air filter - an increase of the air path resistance
    air blower - a decrease of the air flow efficiency
    gas turbine - an increase of the gas path resistance
    air cooler - a decrease of the air resistance
    gas leak through the piston rings or valves (or both)
    fuel effective quantity decrease
    injection advance angle change
    decrease of cooling efficiency
    friction coefficient increase
    set engine speed change
    engine load change
    ambient air (pressure and temperature)
    air cooling water flow change
    cylinder cooling water temperature
    lubricating oil temperature change
    lubricating oil pressure drop at the oil filter
    clogged and worn injector nozzle



The following maintenance and repairs can be simulated in Turbo Diesel 5:

    cooling pump repair
    water temp. controller adjustment
    cooling system washing
    lubricating pump repair
    oil filter cleaning
    oil temp. controller adjustment
    engine bearing repair
    turbocharger general repair
    air side washing
    gas side washing
    air filter cleaning
    air cooler cleaning
    exhaust system cleaning
    cylinder general repair (piston rings and cylinder head)
    fuel pump general repair
    fuel pump adjustment
    injection valve repair