Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 27.622322] kexec: Starting new kernel
- [ 27.626093] Disabling non-boot CPUs ...
- [ 27.668039] CPU1: shutdown
- [ 27.747842] CPU2: shutdown
- [ 27.818284] CPU3: shutdown
- [ 27.851212] Bye!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.1.0-rc7-next-20150615-dirty (fabio@fabio-Latitude-E6410) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubu5
- [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Freescale i.MX6 Quad SABRE Smart Device Board
- [ 0.000000] cma: Reserved 16 MiB at 0x4f000000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @be796000 s16960 r8192 d24000 u49152
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- [ 0.000000] Kernel command line: console=ttymxc0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait rw
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1003120K/1048576K available (7767K kernel code, 408K rwdata, 2648K rodata, 420K init, 8371K bss, 29072K reserv)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
- [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
- [ 0.000000] .text : 0x80008000 - 0x80a3408c (10417 kB)
- [ 0.000000] .init : 0x80a35000 - 0x80a9e000 ( 420 kB)
- [ 0.000000] .data : 0x80a9e000 - 0x80b04000 ( 408 kB)
- [ 0.000000] .bss : 0x80b06000 - 0x81332dc4 (8372 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] L2C-310 erratum 769419 enabled
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
- [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
- [ 0.000000] Switching to timer-based delay loop, resolution 333ns
- [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
- [ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
- [ 0.001245] Console: colour dummy device 80x30
- [ 0.001268] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.001275] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.001281] ... MAX_LOCK_DEPTH: 48
- [ 0.001288] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.001294] ... CLASSHASH_SIZE: 4096
- [ 0.001300] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.001306] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.001312] ... CHAINHASH_SIZE: 32768
- [ 0.001318] memory used by lock dependency info: 5167 kB
- [ 0.001325] per task-struct memory footprint: 1152 bytes
- [ 0.001345] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- [ 0.001360] pid_max: default: 32768 minimum: 301
- [ 0.001574] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001587] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002936] CPU: Testing write buffer coherency: ok
- [ 0.003603] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.003664] Setting up static identity map for 0x10008280 - 0x100082f0
- [ 0.007302] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.008602] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.009588] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.009784] Brought up 4 CPUs
- [ 0.009804] SMP: Total of 4 processors activated (24.00 BogoMIPS).
- [ 0.009812] CPU: All CPU(s) started in SVC mode.
- [ 0.011348] devtmpfs: initialized
- [ 0.033093] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.033847] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.035236] pinctrl core: initialized pinctrl subsystem
- [ 0.037838] NET: Registered protocol family 16
- [ 0.041161] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.042826] CPU identified as i.MX6Q, silicon rev 1.2
- [ 0.079211] No ATAGs?
- [ 0.079264] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.079275] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.081675] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
- [ 0.135450] mxs-dma 110000.dma-apbh: initialized
- [ 0.140046] vgaarb: loaded
- [ 0.140778] SCSI subsystem initialized
- [ 0.141630] usbcore: registered new interface driver usbfs
- [ 0.141749] usbcore: registered new interface driver hub
- [ 0.141921] usbcore: registered new device driver usb
- [ 0.143726] i2c i2c-0: IMX I2C adapter registered
- [ 0.143748] i2c i2c-0: can't use DMA
- [ 0.144578] i2c i2c-1: IMX I2C adapter registered
- [ 0.144597] i2c i2c-1: can't use DMA
- [ 0.145419] i2c i2c-2: IMX I2C adapter registered
- [ 0.145439] i2c i2c-2: can't use DMA
- [ 0.145577] Linux video capture interface: v2.00
- [ 0.145777] pps_core: LinuxPPS API ver. 1 registered
- [ 0.145787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.145829] PTP clock support registered
- [ 0.146443] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.148893] Bluetooth: Core ver 2.20
- [ 0.148964] NET: Registered protocol family 31
- [ 0.148973] Bluetooth: HCI device and connection manager initialized
- [ 0.149024] Bluetooth: HCI socket layer initialized
- [ 0.149045] Bluetooth: L2CAP socket layer initialized
- [ 0.149148] Bluetooth: SCO socket layer initialized
- [ 0.150334] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.151470] clocksource: Switched to clocksource mxc_timer1
- [ 0.174449] NET: Registered protocol family 2
- [ 0.175776] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.175913] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
- [ 0.178229] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.178412] UDP hash table entries: 512 (order: 3, 40960 bytes)
- [ 0.178732] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
- [ 0.179635] NET: Registered protocol family 1
- [ 0.180534] RPC: Registered named UNIX socket transport module.
- [ 0.180546] RPC: Registered udp transport module.
- [ 0.180555] RPC: Registered tcp transport module.
- [ 0.180563] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.181976] hw perfevents: Failed to parse /soc/pmu/interrupt-affinity[0]
- [ 0.182052] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- [ 0.184643] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.198776] VFS: Disk quotas dquot_6.6.0
- [ 0.199126] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.204913] NFS: Registering the id_resolver key type
- [ 0.205104] Key type id_resolver registered
- [ 0.205115] Key type id_legacy registered
- [ 0.205253] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
- [ 0.206672] fuse init (API version 7.23)
- [ 0.213462] io scheduler noop registered
- [ 0.213484] io scheduler deadline registered
- [ 0.213564] io scheduler cfq registered (default)
- [ 0.214109] imx-weim 21b8000.weim: Driver registered.
- [ 0.335669] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
- [ 0.335687] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
- [ 0.335700] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
- [ 0.335714] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.336711] PCI: bus0: Fast back to back transfers disabled
- [ 0.351586] PCI: bus1: Fast back to back transfers disabled
- [ 0.351776] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
- [ 0.351798] pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x011fffff]
- [ 0.351813] pci 0000:00:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref]
- [ 0.351831] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x01101fff 64bit]
- [ 0.351899] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.351914] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
- [ 0.352497] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
- [ 0.352512] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.354186] backlight supply power not found, using dummy regulator
- [ 0.357638] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
- [ 0.357659] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
- [ 0.363611] imx-sdma 20ec000.sdma: initialized
- [ 0.365662] pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1
- [ 0.366335] pfuze100-regulator 1-0008: FAB: 0, FIN: 0
- [ 0.366348] pfuze100-regulator 1-0008: pfuze100 found.
- [ 0.386078] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 24, base_baud = 5000000) is a IMX
- [ 1.253128] console [ttymxc0] enabled
- [ 1.259546] [drm] Initialized drm 1.1.0 20060810
- [ 1.269397] imx-ipuv3 2400000.ipu: IPUv3H probed
- [ 1.277879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.284548] [drm] No driver support for vblank timestamp query.
- [ 1.290916] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
- [ 1.298498] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
- [ 1.306080] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops)
- [ 1.313655] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops)
- [ 1.321483] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
- [ 1.329562] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops)
- [ 1.337409] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops imx_ldb_ops)
- [ 1.360897] Console: switching to colour frame buffer device 128x48
- [ 1.372223] imx-drm display-subsystem: fb0: frame buffer device
- [ 1.378243] imx-drm display-subsystem: registered panic notifier
- [ 1.411572] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
- [ 1.418043] imx-ipuv3 2800000.ipu: IPUv3H probed
- [ 1.440577] brd: module loaded
- [ 1.455724] loop: module loaded
- [ 1.460261] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
- [ 1.468250] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
- [ 1.476286] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
- [ 1.484495] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
- [ 1.495587] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
- [ 1.502609] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 1.511410] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
- [ 1.523386] scsi host0: ahci-imx
- [ 1.527598] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 295
- [ 1.541965] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 0, 0
- [ 1.548320] spi_imx 2008000.ecspi: probed
- [ 1.553046] CAN device driver interface
- [ 1.558402] 2188000.ethernet supply phy not found, using dummy regulator
- [ 1.582735] pps pps0: new PPS source ptp0
- [ 1.587358] fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
- [ 1.597347] fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: 4e:e5:4f:19:a9:49
- [ 1.615697] libphy: fec_enet_mii_bus: probed
- [ 1.621467] fec 2188000.ethernet eth0: registered PHC device 0
- [ 1.628311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.634880] ehci-pci: EHCI PCI platform driver
- [ 1.639475] ehci-mxc: Freescale On-Chip EHCI Host driver
- [ 1.645120] usbcore: registered new interface driver usb-storage
- [ 1.653597] usb_otg_vbus: supplied by SWBST
- [ 1.666376] usb_h1_vbus: supplied by SWBST
- [ 1.674127] ci_hdrc ci_hdrc.1: EHCI Host Controller
- [ 1.679206] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- [ 1.701509] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- [ 1.710320] hub 1-0:1.0: USB hub found
- [ 1.714421] hub 1-0:1.0: 1 port detected
- [ 1.721740] mousedev: PS/2 mouse device common for all mice
- [ 1.881497] ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.886953] ahci-imx 2200000.sata: no device found, disabling link.
- [ 1.893250] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
- [ 2.031487] usb 1-1: new full-speed USB device number 2 using ci_hdrc
- [ 2.331463] egalax_ts 2-0004: Failed to read firmware version
- [ 2.337261] egalax_ts: probe of 2-0004 failed with error -110
- [ 2.345930] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
- [ 2.354435] i2c /dev entries driver
- [ 2.360356] IR NEC protocol handler initialized
- [ 2.364986] IR RC5(x/sz) protocol handler initialized
- [ 2.370057] IR RC6 protocol handler initialized
- [ 2.374620] IR JVC protocol handler initialized
- [ 2.379167] IR Sony protocol handler initialized
- [ 2.383818] IR SANYO protocol handler initialized
- [ 2.388538] IR Sharp protocol handler initialized
- [ 2.393276] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.399125] IR XMP protocol handler initialized
- [ 2.409596] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2
- [ 2.418529] coda 2040000.vpu: firmware request failed
- [ 2.424327] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
- [ 2.430380] Bluetooth: HCI UART driver ver 2.3
- [ 2.434867] Bluetooth: HCI UART protocol LL registered
- [ 2.440015] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 2.446725] sdhci: Secure Digital Host Controller Interface driver
- [ 2.452940] sdhci: Copyright(c) Pierre Ossman
- [ 2.457314] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.464151] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
- [ 2.471328] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
- [ 2.476514] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO
- [ 2.481705] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
- [ 2.492021] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found
- [ 2.498215] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
- [ 2.551500] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
- [ 2.559476] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
- [ 2.566673] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
- [ 2.571854] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO
- [ 2.577033] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
- [ 2.586376] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found
- [ 2.592593] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
- [ 2.641497] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
- [ 2.649710] /soc/aips-bus@02100000/usdhc@0219c000: voltage-ranges unspecified
- [ 2.657055] sdhci-esdhc-imx 219c000.usdhc: No vmmc regulator found
- [ 2.663266] sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found
- [ 2.711493] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
- [ 2.720124] usbcore: registered new interface driver usbhid
- [ 2.725729] usbhid: USB HID core driver
- [ 2.742022] wm8962 0-001a: customer id 0 revision D
- [ 2.781167] input: WM8962 Beep Generator as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-001a/input/input1
- [ 2.796674] imx-wm8962 sound: wm8962 <-> 202c000.ssi mapping ok
- [ 2.811032] NET: Registered protocol family 10
- [ 2.818651] sit: IPv6 over IPv4 tunneling driver
- [ 2.824974] NET: Registered protocol family 17
- [ 2.829459] can: controller area network core (rev 20120528 abi 9)
- [ 2.835791] NET: Registered protocol family 29
- [ 2.840262] can: raw protocol (rev 20120528)
- [ 2.844656] can: broadcast manager protocol (rev 20120528 t)
- [ 2.850349] can: netlink gateway (rev 20130117) max_hops=1
- [ 2.856468] Key type dns_resolver registered
- [ 2.864446] Registering SWP/SWPB emulation handler
- [ 2.879176] input: gpio-keys as /devices/soc0/gpio-keys/input/input2
- [ 2.887122] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 2015-06-10 23:01:29 UTC (1433977289)
- [ 2.932991] mmc1: new SDHC card at address bae9
- [ 2.933974] SW4: disabling
- [ 2.933984] wm8962-supply: disabling
- [ 2.933993] usb_otg_vbus: disabling
- [ 2.934404] ALSA device list:
- [ 2.934408] #0: wm8962-audio
- [ 2.956856] Waiting for root device /dev/mmcblk0p2...
- [ 2.964509] mmcblk0: mmc1:bae9 SD08G 7.40 GiB
- [ 2.975690] mmcblk0: p1 p2
- [ 3.078947] mmc2: MAN_BKOPS_EN bit is not set
- [ 3.095548] mmc2: new DDR MMC card at address 0001
- [ 3.103194] mmcblk1: mmc2:0001 SEM08G 7.39 GiB
- [ 3.111738] mmcblk1boot0: mmc2:0001 SEM08G partition 1 2.00 MiB
- [ 3.119667] mmcblk1boot1: mmc2:0001 SEM08G partition 2 2.00 MiB
- [ 3.126267] mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB
- [ 3.136688] mmcblk1: p1 p2
- [ 3.181841] kjournald starting. Commit interval 5 seconds
- [ 3.193056] EXT3-fs (mmcblk0p2): using internal journal
- [ 3.200801] EXT3-fs (mmcblk0p2): recovery complete
- [ 3.205631] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 3.212617] VFS: Mounted root (ext3 filesystem) on device 179:2.
- [ 3.227324] devtmpfs: mounted
- [ 3.230856] Freeing unused kernel memory: 420K (80a35000 - 80a9e000)
- [ 3.302509] cfg80211: Calling CRDA to update world regulatory domain
- INIT: version 2.88 booting
- Starting udev
- udev: Not using udev cache because of changes detected in the following files:
- udev: /proc/version /proc/cmdline /proc/devices
- udev: lib/udev/rules.d/* etc/udev/rules.d/*
- udev: The udev cache will be regenerated. To identify the detected changes,
- udev: compare the cached sysconf at /etc/udev/cache.data
- udev: against the current sysconf at /dev/shm/udev.cache
- [ 4.511993] udevd[120]: starting version 182
- bootlogd: cannot allocate pseudo tty: No such file or directory
- [ 5.772904] random: dd urandom read with 47 bits of entropy available
- Populating dev cache
- INIT: Entering runlevel: 5
- [ 6.463489] cfg80211: Calling CRDA to update world regulatory domain
- Configuring network interfaces... [ 6.745707] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus)
- [ 6.758242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- udhcpc (v1.23.1) started
- Sending discover...
- [ 9.631602] cfg80211: Calling CRDA to update world regulatory domain
- [ 9.743670] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 9.751800] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Sending discover...
- Sending select for 192.168.0.15...
- Lease of 192.168.0.15 obtained, lease time 3600
- /etc/udhcpc.d/50default: Adding DNS 201.82.0.69
- /etc/udhcpc.d/50default: Adding DNS 201.82.0.66
- /etc/udhcpc.d/50default: Adding DNS 201.6.4.116
- done.
- Starting OpenBSD Secure Shell server: sshd
- done.
- Starting syslogd/klogd: done
- Poky (Yocto Project Reference Distro) 1.8 wandboard-solo /dev/ttymxc0
- wandboard-solo login: [ 12.791638] cfg80211: Calling CRDA to update world regulatory domain
- root
- root@wandboard-solo:~#
- root@wandboard-solo:~# [ 15.951634] cfg80211: Calling CRDA to update world regulatory domain
- [ 19.111741] cfg80211: Calling CRDA to update world regulatory domain
- [ 22.271726] cfg80211: Calling CRDA to update world regulatory domain
- [ 25.431527] cfg80211: Calling CRDA to update world regulatory domain
- [ 28.591624] cfg80211: Calling CRDA to update world regulatory domain
- [ 31.753914] cfg80211: Calling CRDA to update world regulatory domain
- [ 34.911529] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
- [ 47.220418] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement