API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 22nd, 2019
260
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.64 KB | None | 0 0
raw download clone embed print report
  1. Wiphy phy1
  2. max # scan SSIDs: 20
  3. max scan IEs length: 422 bytes
  4. max # sched scan SSIDs: 20
  5. max # match sets: 11
  6. max # scan plans: 2
  7. max scan plan interval: 65535
  8. max scan plan iterations: 254
  9. Retry short limit: 7
  10. Retry long limit: 4
  11. Coverage class: 0 (up to 0m)
  12. Device supports RSN-IBSS.
  13. Device supports AP-side u-APSD.
  14. Device supports T-DLS.
  15. Supported Ciphers:
  16. * WEP40 (00-0f-ac:1)
  17. * WEP104 (00-0f-ac:5)
  18. * TKIP (00-0f-ac:2)
  19. * CCMP-128 (00-0f-ac:4)
  20. Available Antennas: TX 0 RX 0
  21. Supported interface modes:
  22. * IBSS
  23. * managed
  24. * AP
  25. * AP/VLAN
  26. * monitor
  27. * P2P-client
  28. * P2P-GO
  29. * P2P-device
  30. Band 1:
  31. Capabilities: 0x11ef
  32. RX LDPC
  33. HT20/HT40
  34. SM Power Save disabled
  35. RX HT20 SGI
  36. RX HT40 SGI
  37. TX STBC
  38. RX STBC 1-stream
  39. Max AMSDU length: 3839 bytes
  40. DSSS/CCK HT40
  41. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  42. Minimum RX AMPDU time spacing: 4 usec (0x05)
  43. HT Max RX data rate: 300 Mbps
  44. HT TX/RX MCS rate indexes supported: 0-15
  45. Bitrates (non-HT):
  46. * 1.0 Mbps
  47. * 2.0 Mbps (short preamble supported)
  48. * 5.5 Mbps (short preamble supported)
  49. * 11.0 Mbps (short preamble supported)
  50. * 6.0 Mbps
  51. * 9.0 Mbps
  52. * 12.0 Mbps
  53. * 18.0 Mbps
  54. * 24.0 Mbps
  55. * 36.0 Mbps
  56. * 48.0 Mbps
  57. * 54.0 Mbps
  58. Frequencies:
  59. * 2412 MHz [1] (22.0 dBm)
  60. * 2417 MHz [2] (22.0 dBm)
  61. * 2422 MHz [3] (22.0 dBm)
  62. * 2427 MHz [4] (22.0 dBm)
  63. * 2432 MHz [5] (22.0 dBm)
  64. * 2437 MHz [6] (22.0 dBm)
  65. * 2442 MHz [7] (22.0 dBm)
  66. * 2447 MHz [8] (22.0 dBm)
  67. * 2452 MHz [9] (22.0 dBm)
  68. * 2457 MHz [10] (22.0 dBm)
  69. * 2462 MHz [11] (22.0 dBm)
  70. * 2467 MHz [12] (22.0 dBm)
  71. * 2472 MHz [13] (22.0 dBm)
  72. * 2484 MHz [14] (disabled)
  73. Band 2:
  74. Capabilities: 0x11ef
  75. RX LDPC
  76. HT20/HT40
  77. SM Power Save disabled
  78. RX HT20 SGI
  79. RX HT40 SGI
  80. TX STBC
  81. RX STBC 1-stream
  82. Max AMSDU length: 3839 bytes
  83. DSSS/CCK HT40
  84. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  85. Minimum RX AMPDU time spacing: 4 usec (0x05)
  86. HT Max RX data rate: 300 Mbps
  87. HT TX/RX MCS rate indexes supported: 0-15
  88. VHT Capabilities (0x038071b0):
  89. Max MPDU length: 3895
  90. Supported Channel Width: neither 160 nor 80+80
  91. RX LDPC
  92. short GI (80 MHz)
  93. TX STBC
  94. SU Beamformee
  95. VHT RX MCS set:
  96. 1 streams: MCS 0-9
  97. 2 streams: MCS 0-9
  98. 3 streams: not supported
  99. 4 streams: not supported
  100. 5 streams: not supported
  101. 6 streams: not supported
  102. 7 streams: not supported
  103. 8 streams: not supported
  104. VHT RX highest supported: 0 Mbps
  105. VHT TX MCS set:
  106. 1 streams: MCS 0-9
  107. 2 streams: MCS 0-9
  108. 3 streams: not supported
  109. 4 streams: not supported
  110. 5 streams: not supported
  111. 6 streams: not supported
  112. 7 streams: not supported
  113. 8 streams: not supported
  114. VHT TX highest supported: 0 Mbps
  115. Bitrates (non-HT):
  116. * 6.0 Mbps
  117. * 9.0 Mbps
  118. * 12.0 Mbps
  119. * 18.0 Mbps
  120. * 24.0 Mbps
  121. * 36.0 Mbps
  122. * 48.0 Mbps
  123. * 54.0 Mbps
  124. Frequencies:
  125. * 5180 MHz [36] (22.0 dBm)
  126. * 5200 MHz [40] (22.0 dBm)
  127. * 5220 MHz [44] (22.0 dBm)
  128. * 5240 MHz [48] (22.0 dBm)
  129. * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
  130. * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
  131. * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
  132. * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
  133. * 5340 MHz [68] (disabled)
  134. * 5360 MHz [72] (disabled)
  135. * 5380 MHz [76] (disabled)
  136. * 5400 MHz [80] (disabled)
  137. * 5420 MHz [84] (disabled)
  138. * 5440 MHz [88] (disabled)
  139. * 5460 MHz [92] (disabled)
  140. * 5480 MHz [96] (disabled)
  141. * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
  142. * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
  143. * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
  144. * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
  145. * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
  146. * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
  147. * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
  148. * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
  149. * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
  150. * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
  151. * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
  152. * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
  153. * 5745 MHz [149] (22.0 dBm)
  154. * 5765 MHz [153] (22.0 dBm)
  155. * 5785 MHz [157] (22.0 dBm)
  156. * 5805 MHz [161] (22.0 dBm)
  157. * 5825 MHz [165] (22.0 dBm)
  158. * 5845 MHz [169] (disabled)
  159. * 5865 MHz [173] (disabled)
  160. * 5885 MHz [177] (disabled)
  161. * 5905 MHz [181] (disabled)
  162. Supported commands:
  163. * new_interface
  164. * set_interface
  165. * new_key
  166. * start_ap
  167. * new_station
  168. * new_mpath
  169. * set_mesh_config
  170. * set_bss
  171. * authenticate
  172. * associate
  173. * deauthenticate
  174. * disassociate
  175. * join_ibss
  176. * join_mesh
  177. * remain_on_channel
  178. * set_tx_bitrate_mask
  179. * frame
  180. * frame_wait_cancel
  181. * set_wiphy_netns
  182. * set_channel
  183. * set_wds_peer
  184. * tdls_mgmt
  185. * tdls_oper
  186. * start_sched_scan
  187. * probe_client
  188. * set_noack_map
  189. * register_beacons
  190. * start_p2p_device
  191. * set_mcast_rate
  192. * connect
  193. * disconnect
  194. * channel_switch
  195. * set_qos_map
  196. * add_tx_ts
  197. * set_multicast_to_unicast
  198. Supported TX frame types:
  199. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  200. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  201. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  202. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  203. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  204. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  205. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  206. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  207. Supported RX frame types:
  208. * IBSS: 0x40 0xb0 0xc0 0xd0
  209. * managed: 0x40 0xd0
  210. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  211. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  212. * mesh point: 0xb0 0xc0 0xd0
  213. * P2P-client: 0x40 0xd0
  214. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  215. * P2P-device: 0x40 0xd0
  216. WoWLAN support:
  217. * wake up on disconnect
  218. * wake up on magic packet
  219. * wake up on pattern match, up to 20 patterns of 16-128 bytes,
  220. maximum packet offset 0 bytes
  221. * wake up on EAP identity request
  222. * wake up on rfkill release
  223. * wake up on network detection, up to 11 match sets
  224. software interface modes (can always be added):
  225. * AP/VLAN
  226. * monitor
  227. valid interface combinations:
  228. * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
  229. total <= 3, #channels <= 2
  230. HT Capability overrides:
  231. * MCS: ff ff ff ff ff ff ff ff ff ff
  232. * maximum A-MSDU length
  233. * supported channel width
  234. * short GI for 40 MHz
  235. * max A-MPDU length exponent
  236. * min MPDU start spacing
  237. Device supports TX status socket option.
  238. Device supports HT-IBSS.
  239. Device supports SAE with AUTHENTICATE command
  240. Device supports low priority scan.
  241. Device supports scan flush.
  242. Device supports per-vif TX power setting
  243. P2P GO supports CT window setting
  244. P2P GO supports opportunistic powersave setting
  245. Driver supports full state transitions for AP/GO clients
  246. Driver supports a userspace MPM
  247. Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
  248. Device adds DS IE to probe requests
  249. Device can update TPC Report IE
  250. Device supports static SMPS
  251. Device supports dynamic SMPS
  252. Device supports WMM-AC admission (TSPECs)
  253. Device supports configuring vdev MAC-addr on create.
  254. Device supports TDLS channel switching
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!