Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2.4.2-RELEASE][admin@pfSense.localdomain]/root: dmesg
- Copyright (c) 1992-2017 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.1-RELEASE-p6 #8 r313908+a5b33c9d1c4(RELENG_2_4): Tue Dec 12 13:51:24 CST 2017
- root@buildbot2.netgate.com:/builder/ce-242/tmp/obj/builder/ce-242/tmp/FreeBSD-src/sys/pfSense amd64
- FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
- VT(efifb): resolution 1024x768
- CPU: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (1497.66-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x101<LAHF,Prefetch>
- Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
- XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
- TSC: P-state invariant, performance statistics
- real memory = 8589934592 (8192 MB)
- avail memory = 7860097024 (7495 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <INTEL EDK2 >
- WARNING: L1 data cache covers less APIC IDs than a core
- 0 < 1
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- random: unblocking device.
- ioapic0 <Version 2.0> irqs 0-119 on motherboard
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #3 Launched!
- Timecounter "TSC" frequency 1497655868 Hz quality 1000
- iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
- iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806834c0, 0) error 1
- random: entropy device external interface
- wlan: mac acl policy registered
- ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
- ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8065c5a0, 0) error 1
- ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
- ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8065c650, 0) error 1
- ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
- ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8065c700, 0) error 1
- iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
- iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80683360, 0) error 1
- iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
- iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
- module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80683410, 0) error 1
- kbd1 at kbdmux0
- netmap: loaded module
- module_register_init: MOD_LOAD (vesa, 0xffffffff81158310, 0) error 19
- random: registering fast source Intel Secure Key RNG
- random: fast provider: "Intel Secure Key RNG"
- nexus0
- cryptosoft0: <software crypto> on motherboard
- padlock0: No ACE support.
- acpi0: <ALASKA A M I > on motherboard
- unknown: I/O range not supported
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
- Timecounter "HPET" frequency 19200000 Hz quality 950
- Event timer "HPET" frequency 19200000 Hz quality 550
- Event timer "HPET1" frequency 19200000 Hz quality 440
- Event timer "HPET2" frequency 19200000 Hz quality 440
- Event timer "HPET3" frequency 19200000 Hz quality 440
- Event timer "HPET4" frequency 19200000 Hz quality 440
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
- vgapci0: Boot video device
- hdac0: <Intel (0x5a98) HDA Controller> mem 0x91d10000-0x91d13fff,0x91b00000-0x91bfffff irq 25 at device 14.0 on pci0
- pci0: <simple comms> at device 15.0 (no driver attached)
- ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91d14000-0x91d15fff,0x91d18000-0x91d180ff,0x91d17000-0x91d177ff at device 18.0 on pci0
- ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <PCI-PCI bridge> at device 2.0 on pci2
- pci3: <PCI bus> on pcib3
- igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd020-0xd03f mem 0x91a20000-0x91a3ffff,0x91800000-0x919fffff,0x91a44000-0x91a47fff at device 0.0 on pci3
- igb0: Using MSIX interrupts with 2 vectors
- igb0: Ethernet address: 00:1b:21:33:9e:e8
- igb0: netmap queues/slots: TX 1/1024, RX 1/1024
- igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0x91a00000-0x91a1ffff,0x91600000-0x917fffff,0x91a40000-0x91a43fff at device 0.1 on pci3
- igb1: Using MSIX interrupts with 2 vectors
- igb1: Ethernet address: 00:1b:21:33:9e:e9
- igb1: netmap queues/slots: TX 1/1024, RX 1/1024
- pcib4: <PCI-PCI bridge> at device 4.0 on pci2
- pci4: <PCI bus> on pcib4
- igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc020-0xc03f mem 0x91420000-0x9143ffff,0x91200000-0x913fffff,0x91444000-0x91447fff at device 0.0 on pci4
- igb2: Using MSIX interrupts with 2 vectors
- igb2: Ethernet address: 00:1b:21:33:9e:ec
- igb2: netmap queues/slots: TX 1/1024, RX 1/1024
- igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0x91400000-0x9141ffff,0x91000000-0x911fffff,0x91440000-0x91443fff at device 0.1 on pci4
- igb3: Using MSIX interrupts with 2 vectors
- igb3: Ethernet address: 00:1b:21:33:9e:ed
- igb3: netmap queues/slots: TX 1/1024, RX 1/1024
- pcib5: <ACPI PCI-PCI bridge> at device 19.2 on pci0
- pci5: <ACPI PCI bus> on pcib5
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91c04000-0x91c04fff,0x91c00000-0x91c03fff at device 0.0 on pci5
- re0: Using 1 MSI-X message
- re0: Chip rev. 0x4c000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Using defaults for TSO: 65518/35/2048
- re0: Ethernet address: 70:85:c2:43:e3:ca
- re0: netmap queues/slots: TX 1/256, RX 1/256
- xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91d00000-0x91d0ffff irq 17 at device 21.0 on pci0
- xhci0: 32 bytes context size, 64-bit DMA
- usbus0 on xhci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- acpi_button0: <Power Button> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0
- ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc1: FIFO with 16/16/9 bytes threshold
- ppbus0: <Parallel port bus> on ppc1
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- Timecounters tick every 1.000 msec
- nvme cam probe device init
- hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
- hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
- pcm0: <Realtek ALC887 (Analog)> at nid 21 and 24,26 on hdaa0
- pcm1: <Realtek ALC887 (Analog)> at nid 20 and 25 on hdaa0
- pcm2: <Realtek ALC887 (Front Analog Headphones)> at nid 27 on hdaa0
- hdacc1: <Intel (0x280a) HDA CODEC> at cad 2 on hdac0
- hdaa1: <Intel (0x280a) Audio Function Group> at nid 1 on hdacc1
- pcm3: <Intel (0x280a) (HDMI/DP 8ch)> at nid 3 on hdaa1
- ugen0.1: <0x8086 XHCI root HUB> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- uhub0: 15 ports with 15 removable, self powered
- ugen0.2: <DELL DELL USB Keyboard> at usbus0
- ukbd0 on uhub0
- ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 1> on usbus0
- kbd2 at ukbd0
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <Crucial CT250MX200SSD1 MU01> ACS-3 ATA SATA 3.x device
- ada0: Serial Number 1533105DEF49
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 238475MB (488397168 512 byte sectors)
- ada0: quirks=0x2<NCQ_TRIM_BROKEN>
- Trying to mount root from ufs:/dev/gptid/afa1cb52-f584-11e7-848c-001b21339ee8 [rw]...
- WARNING: / was not properly dismounted
- igb0: link state changed to UP
- pflog0: promiscuous mode enabled
- igb1: link state changed to UP
- ugen0.2: <DELL DELL USB Keyboard> at usbus0 (disconnected)
- ukbd0: at uhub0, port 2, addr 1 (disconnected)
- ukbd0: detached
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement