Advertisement
Guest User

GNUBS'D MIPSel DD-WRT (now mt76) 4.14.170 [CRISPIN] bootlog

a guest
Feb 9th, 2020
564
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C++ 21.08 KB | None | 0 0
  1. bootlog of the latest DD-WRT 4.14.170 for MIPSEL routers (currently running on an MT7621AT+MT7615x2 [DIR882]), now using MT76.
  2.  
  3. using the latest backports and wireless-next, plus with bash and glibc, and a host of other specialisations for the dd-wrt platform (including programs like dnscrypt, unbound, etc for the firmware that aren't included w/ BS' version), i think my version is *still* the best. here is the bootlog. enjoy
  4.  
  5.  
  6. [    0.000000] Linux version 4.14.170 (Gagan@GagansMacPro) (gcc version 8.2.0 (GCC)) #3325 SMP PREEMPT Sun Feb 9 17:13:34 MST 2020
  7. [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  8. [    0.000000] bootconsole [early0] enabled
  9. [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  10. [    0.000000] MIPS: machine is D-Link DIR-882 rev. A1
  11. [    0.000000] Determined physical RAM map:
  12. [    0.000000]  memory: 08000000 @ 00000000 (usable)
  13. [    0.000000] VPE topology {2,2} total 4
  14. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  15. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  16. [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  17. [    0.000000] Zone ranges:
  18. [    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
  19. [    0.000000]   Normal   [mem 0x0000000001000000-0x0000000007ffffff]
  20. [    0.000000]   HighMem  empty
  21. [    0.000000] Movable zone start for each node
  22. [    0.000000] Early memory node ranges
  23. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
  24. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  25. [    0.000000] On node 0 totalpages: 32768
  26. [    0.000000] free_area_init_node: node 0, pgdat 8071b0a0, node_mem_map 81003000
  27. [    0.000000]   DMA zone: 32 pages used for memmap
  28. [    0.000000]   DMA zone: 0 pages reserved
  29. [    0.000000]   DMA zone: 4096 pages, LIFO batch:0
  30. [    0.000000]   Normal zone: 224 pages used for memmap
  31. [    0.000000]   Normal zone: 28672 pages, LIFO batch:7
  32. [    0.000000] percpu: Embedded 14 pages/cpu s27632 r8192 d21520 u57344
  33. [    0.000000] pcpu-alloc: s27632 r8192 d21520 u57344 alloc=14*4096
  34. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  35. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
  36. [    0.000000] Kernel command line: console=ttyS0,57600n8 rootfstype=squashfs root=/dev/mtdblock5
  37. [    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  38. [    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  39. [    0.000000] log_buf_len min size: 16384 bytes
  40. [    0.000000] log_buf_len: 32768 bytes
  41. [    0.000000] early log buf free: 14200(86%)
  42. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  43. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  44. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  45. [    0.000000] Writing ErrCtl register=00061200
  46. [    0.000000] Readback ErrCtl register=00061200
  47. [    0.000000] Memory: 121832K/131072K available (5780K kernel code, 389K rwdata, 1108K rodata, 260K init, 215K bss, 9240K reserved, 0K cma-reserved, 0K highmem)
  48. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  49. [    0.000000] Preemptible hierarchical RCU implementation.
  50. [    0.000000]  Tasks RCU enabled.
  51. [    0.000000] NR_IRQS: 256
  52. [    0.000000] CPU Clock: 880MHz
  53. [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
  54. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
  55. [    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
  56. [    0.012916] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
  57. [    0.050678] pid_max: default: 4096 minimum: 301
  58. [    0.057254] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  59. [    0.067687] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  60. [    0.103279] Hierarchical SRCU implementation.
  61. [    0.125336] smp: Bringing up secondary CPUs ...
  62. [    0.160796] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  63. [    0.160805] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  64. [    0.160817] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  65. [    0.160949] CPU1 revision is: 0001992f (MIPS 1004Kc)
  66. [    0.188092] Synchronize counters for CPU 1: done.
  67. [    0.273678] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  68. [    0.273687] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  69. [    0.273694] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  70. [    0.273762] CPU2 revision is: 0001992f (MIPS 1004Kc)
  71. [    0.297435] Synchronize counters for CPU 2: done.
  72. [    0.373064] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  73. [    0.373072] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  74. [    0.373079] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  75. [    0.373152] CPU3 revision is: 0001992f (MIPS 1004Kc)
  76. [    0.400202] Synchronize counters for CPU 3: done.
  77. [    0.446868] smp: Brought up 1 node, 4 CPUs
  78. [    0.453093] devtmpfs: initialized
  79. [    0.460320] random: get_random_u32 called from bucket_table_alloc+0x2b8/0x36c with crng_init=0
  80. [    0.474980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  81. [    0.491635] futex hash table entries: 16 (order: -3, 512 bytes)
  82. [    0.500922] pinctrl core: initialized pinctrl subsystem
  83. [    0.509039] NET: Registered protocol family 16
  84. [    0.531431] FPU Affinity set after 4688 emulations
  85. [    0.533032] pull PCIe RST: RALINK_RSTCTRL = 4000000
  86. [    0.840011] release PCIe RST: RALINK_RSTCTRL = 7000000
  87. [    0.847485] ***** Xtal 40MHz *****
  88. [    0.851636] release PCIe RST: RALINK_RSTCTRL = 7000000
  89. [    0.859237] Port 0 N_FTS = 1b105000
  90. [    0.863557] Port 1 N_FTS = 1b105000
  91. [    0.867878] Port 2 N_FTS = 1b102800
  92. [    2.022610] PCIE2 no card, disable it(RST&CLK)
  93. [    2.028706]  -> 21007f2
  94. [    2.030930] PCIE0 enabled
  95. [    2.033541] PCIE1 enabled
  96. [    2.036129] PCI host bridge /pcie@1e140000 ranges:
  97. [    2.043065]  MEM 0x0000000060000000..0x000000006fffffff
  98. [    2.050828]   IO 0x000000001e160000..0x000000001e16ffff
  99. [    2.058605] PCI coherence region base: 0x87c35ce0, mask/settings: 0x60000000
  100. [    2.076558] mt7621_gpio 1e000600.gpio: registering 32 gpios
  101. [    2.085286] mt7621_gpio 1e000600.gpio: registering 32 gpios
  102. [    2.093905] mt7621_gpio 1e000600.gpio: registering 32 gpios
  103. [    2.102789] vgaarb: loaded
  104. [    2.105732] SCSI subsystem initialized
  105. [    2.110707] usbcore: registered new interface driver usbfs
  106. [    2.118955] usbcore: registered new interface driver hub
  107. [    2.126955] usbcore: registered new device driver usb
  108. [    2.134680] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support
  109. [    2.145382] PCI host bridge to bus 0000:00
  110. [    2.150809] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  111. [    2.161852] pci_bus 0000:00: root bus resource [io  0xffffffff]
  112. [    2.171008] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  113. [    2.181895] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  114. [    2.195073] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  115. [    2.195112] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  116. [    2.195125] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
  117. [    2.195188] pci 0000:00:00.0: supports D1
  118. [    2.195197] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  119. [    2.195386] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  120. [    2.195411] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  121. [    2.195424] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
  122. [    2.195469] pci 0000:00:01.0: supports D1
  123. [    2.195478] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  124. [    2.195788] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
  125. [    2.195831] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  126. [    2.196100] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  127. [    2.196230] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
  128. [    2.196273] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  129. [    2.196544] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  130. [    2.196559] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
  131. [    2.196611] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  132. [    2.207040] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  133. [    2.218265] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  134. [    2.228806] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  135. [    2.240039] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  136. [    2.250923] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
  137. [    2.261812] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
  138. [    2.272703] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
  139. [    2.283592] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  140. [    2.295516] pci 0000:00:00.0: PCI bridge to [bus 01]
  141. [    2.302767] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
  142. [    2.313657] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
  143. [    2.325592] pci 0000:00:01.0: PCI bridge to [bus 02]
  144. [    2.332833] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
  145. [    2.344520] clocksource: Switched to clocksource GIC
  146. [    2.353527] NET: Registered protocol family 2
  147. [    2.360287] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  148. [    2.371458] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  149. [    2.381455] TCP: Hash tables configured (established 1024 bind 1024)
  150. [    2.391577] UDP hash table entries: 128 (order: 0, 4096 bytes)
  151. [    2.400469] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  152. [    2.410532] NET: Registered protocol family 1
  153. [    2.416550] PCI: CLS 0 bytes, default 32
  154. [    2.508506] 4 CPUs re-calibrate udelay(lpj = 1163264)
  155. [    2.516900] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  156. [    2.534970] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  157. [    2.550955] io scheduler noop registered
  158. [    2.556279] io scheduler cfq registered (default)
  159. [    2.562919] io scheduler mq-deadline registered
  160. [    2.569298] io scheduler kyber registered
  161. [    2.575392] mtk_hsdma 1e007000.hsdma: Using 3 as missing dma-requests property
  162. [    2.587320] mtk_hsdma 1e007000.hsdma: MediaTek HSDMA driver registered
  163. [    2.603885] random: fast init done
  164. [    2.666209] serial8250_init
  165. [    2.669046] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  166. [    2.680762] console [ttyS0] disabled
  167. [    2.685227] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  168. [    2.700612] console [ttyS0] enabled
  169. [    2.709166] bootconsole [early0] disabled
  170. [    2.720350] Ralink gpio driver initialized:power_gpio[8]
  171. [    2.729723] physmap platform flash device: 01000000 at 1c000000
  172. [    2.738954] virtual memory bc000000
  173. [    2.744325] physmap-flash physmap-flash.0: map_probe failed
  174. [    2.753160] spi-mt7621 1e000b00.spi: sys_freq: 220000000
  175. [    2.761837] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  176. [    2.769327] spi0.0: parsing partitions cmdlinepart
  177. [    2.776283] spi0.0: got parser cmdlinepart
  178. [    2.781910] 5 fixed-partitions partitions found on MTD device spi0.0
  179. [    2.791979] Creating 5 MTD partitions on "spi0.0":
  180. [    2.798942] 0x000000000000-0x000000030000 : "u-boot"
  181. [    2.807365] 0x000000030000-0x000000040000 : "Config"
  182. [    2.815633] 0x000000040000-0x000000050000 : "Factory"
  183. [    2.824118] 0x000000050000-0x000000060000 : "Config2"
  184. [    2.832640] 0x000000060000-0x000001000000 : "sysv"
  185. [    2.854192] 1 squashfs-split partitions found on MTD device sysv
  186. [    2.863579] 0x0000002cb000-0x000000ff0000 : "rootfs"
  187. [    2.871825] mtd: device 5 (rootfs) set to be root filesystem
  188. [    2.881001] libphy: Fixed MDIO Bus: probed
  189. [    2.886569] tun: Universal TUN/TAP device driver, 1.6
  190. [    2.894657] netif_napi_add() called with weight 128 on device eth%d
  191. [    2.912883] mtk_soc_eth 1e100000.ethernet eth0 (uninitialized): port 3 link up
  192. [    2.950312] mtk_soc_eth 1e100000.ethernet: generated random MAC address a6:fb:ad:18:17:b6
  193. [    2.964099] libphy: mdio: probed
  194. [    4.372271] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  195. [    4.382014] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
  196. [    4.396149] PPP generic driver version 2.4.2
  197. [    4.402329] PPP BSD Compression module registered
  198. [    4.409117] PPP Deflate Compression module registered
  199. [    4.416603] PPP MPPE Compression module registered
  200. [    4.423549] NET: Registered protocol family 24
  201. [    4.429837] rdm_major = 255
  202. [    4.433282] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  203. [    4.441305] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
  204. [    4.460675] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
  205. [    4.476354] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
  206. [    4.486069] hub 1-0:1.0: USB hub found
  207. [    4.491005] hub 1-0:1.0: 2 ports detected
  208. [    4.496944] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  209. [    4.504964] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
  210. [    4.517310] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
  211. [    4.527629] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  212. [    4.541841] hub 2-0:1.0: USB hub found
  213. [    4.546769] hub 2-0:1.0: 1 port detected
  214. [    4.552652] usbcore: registered new interface driver usblp
  215. [    4.561153] usbcore: registered new interface driver usb-storage
  216. [    4.570675] usbcore: registered new interface driver usbserial
  217. [    4.632777] rtc-pcf8563 0-0051: registered as rtc0
  218. [    4.652676] i2c /dev entries driver
  219. [    4.657365] Ralink APSoC Hardware Watchdog Timer
  220. [    4.664455] Enable MTK AesEngine Module (verson=00000401)
  221. [    4.672983] reg_int_mask = 0,           INT_MASK = 0
  222. [    4.680080] phy_tx_ring0 = 0x00c00000, tx_ring0 = 0xa0c00000
  223. [    4.688774] phy_rx_ring0 = 0x00c01000, rx_ring0 = 0xa0c01000
  224. [    4.697458] TX_CTX_IDX0 = 0,    TX_DTX_IDX0 = 0
  225. [    4.703882] RX_CRX_IDX0 = 0,    RX_DRX_IDX0 = 800080
  226. [    4.711224] set burstmode = 00,         AES_GLO_CFG = 0
  227. [    4.718423] Registering MediaTek AES-cbc engine to kernel
  228. [    4.726747] Registering MediaTek AES engine to kernel
  229. [    4.734403] usbcore: registered new interface driver usbhid
  230. [    4.742910] usbhid: USB HID core driver
  231. [    4.748664] u32 classifier
  232. [    4.751443]     Performance counters on
  233. [    4.756574]     Actions configured
  234. [    4.761128] Netfilter messages via NETLINK v0.30.
  235. [    4.768201] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  236. [    4.777751] ctnetlink v0.93: registering with nfnetlink.
  237. [    4.786746] ipip: IPv4 and MPLS over IPv4 tunneling driver
  238. [    4.795847] ip_tables: (C) 2000-2006 Netfilter Core Team
  239. [    4.805331] NET: Registered protocol family 10
  240. [    4.813540] Segment Routing with IPv6
  241. [    4.818368] NET: Registered protocol family 17
  242. [    4.825055] Bridge firewalling registered
  243. [    4.831012] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
  244. [    4.844360] DECnet: Routing cache hash table of 512 buckets, 4Kbytes
  245. [    4.854455] NET: Registered protocol family 12
  246. [    4.860755] 8021q: 802.1Q VLAN Support v1.8
  247. [    4.866872] nvram driver (major 251) installed
  248. [    4.888631] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
  249. [    4.918341] usb-storage 2-1:1.0: USB Mass Storage device detected
  250. [    4.927945] rtc-pcf8563 0-0051: hctosys: unable to read the hardware clock
  251. [    4.939619] scsi host0: usb-storage 2-1:1.0
  252. [    4.958019] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  253. [    4.973782] devtmpfs: mounted
  254. [    4.977712] Freeing unused kernel memory: 260K
  255. [    4.983990] This architecture does not have kernel memory protection.
  256. [    5.044585] usb 1-2: new high-speed USB device number 2 using xhci-mtk
  257. [    5.973427] scsi 0:0:0:0: Direct-Access     SanDisk  Extreme          0001 PQ: 0 ANSI: 6
  258. [    6.221412] sd 0:0:0:0: [sda] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB)
  259. [    6.236239] sd 0:0:0:0: [sda] Write Protect is off
  260. [    6.243225] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
  261. [    6.243587] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  262. [    6.262295]  sda: sda1 sda2 sda3
  263. [    6.268865] sd 0:0:0:0: [sda] Attached SCSI removable disk
  264. [   11.499165] random: crng init done
  265. [   15.329785] Started WatchDog Timer.
  266. [   15.609050] Loading modules backported from Linux version wireless-drivers-next-2020-01-26-0-g2a13513
  267. [   15.624838] Backport generated by backports.git v5.4-rc8-1-1-ga17ed9f
  268. [   15.795055] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  269. [   15.815868] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  270. [   16.183604] bus=0x1, slot = 0x0, irq=0x0
  271. [   16.194561] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  272. [   16.196614] bus=0x2, slot = 0x1, irq=0x0
  273. [   16.209311] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
  274.  
  275. [   16.213215] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  276. [   16.237287] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
  277.  
  278. [   16.244212] mt7615e 0000:01:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812
  279. [   16.263314] mt7615e 0000:02:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812
  280. [   16.388640] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
  281. [   16.388670] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
  282. [   18.504054] mtk_soc_eth 1e100000.ethernet: PPE started
  283. [   19.166128] EXT4-fs (sda3): Ignoring removed nobh option
  284. [   19.175047] EXT4-fs (sda1): Ignoring removed nobh option
  285. [   19.189108] EXT4-fs (sda3): barriers disabled
  286. [   19.201369] EXT4-fs (sda1): barriers disabled
  287. [   19.203431] EXT4-fs (sda3): recovery complete
  288. [   19.213981] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
  289. [   19.257950] EXT4-fs (sda1): recovery complete
  290. [   19.264970] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
  291. [   19.327008] Adding 2097148k swap on /dev/sda2.  Priority:-2 extents:1 across:2097148k
  292. [   24.599377] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  293. [   24.678411] device br0 entered promiscuous mode
  294. [   24.805612] br0: port 1(vlan1) entered blocking state
  295. [   24.813312] br0: port 1(vlan1) entered disabled state
  296. [   24.821509] device vlan1 entered promiscuous mode
  297. [   24.828306] device eth0 entered promiscuous mode
  298. [   24.835449] br0: port 1(vlan1) entered blocking state
  299. [   24.842937] br0: port 1(vlan1) entered forwarding state
  300. [   24.851207] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  301. [   24.891706] device br0 left promiscuous mode
  302. [   24.908619] device br0 entered promiscuous mode
  303. [   24.928420] device br0 left promiscuous mode
  304. [   33.031976] IPv6: ADDRCONF(NETDEV_UP): ath0: link is not ready
  305. [   44.426503] IPv6: ADDRCONF(NETDEV_UP): ath0: link is not ready
  306. [   44.438901] br0: port 2(ath0) entered blocking state
  307. [   44.446265] br0: port 2(ath0) entered disabled state
  308. [   44.454252] device ath0 entered promiscuous mode
  309. [   47.084089] IPv6: ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
  310. [   47.094366] br0: port 2(ath0) entered blocking state
  311. [   47.101679] br0: port 2(ath0) entered forwarding state
  312. [   47.483480] br0: port 3(ath0.1) entered blocking state
  313. [   47.491250] br0: port 3(ath0.1) entered disabled state
  314. [   47.499907] device ath0.1 entered promiscuous mode
  315. [   47.508285] IPv6: ADDRCONF(NETDEV_UP): ath0.1: link is not ready
  316. [   47.517821] br0: port 3(ath0.1) entered blocking state
  317. [   47.525581] br0: port 3(ath0.1) entered forwarding state
  318. [   47.608338] IPv6: ADDRCONF(NETDEV_CHANGE): ath0.1: link becomes ready
  319. [   50.739546] IPv6: ADDRCONF(NETDEV_UP): ath1: link is not ready
  320. [   58.150096] IPv6: ADDRCONF(NETDEV_UP): ath1: link is not ready
  321. [   58.162550] br0: port 4(ath1) entered blocking state
  322. [   58.169914] br0: port 4(ath1) entered disabled state
  323. [   58.177913] device ath1 entered promiscuous mode
  324. [  122.162673] IPv6: ADDRCONF(NETDEV_CHANGE): ath1: link becomes ready
  325. [  122.172826] br0: port 4(ath1) entered blocking state
  326. [  122.180135] br0: port 4(ath1) entered forwarding state
  327. [  122.190983] br0: port 5(ath1.1) entered blocking state
  328. [  122.198770] br0: port 5(ath1.1) entered disabled state
  329. [  122.207253] device ath1.1 entered promiscuous mode
  330. [  122.215848] IPv6: ADDRCONF(NETDEV_UP): ath1.1: link is not ready
  331. [  122.225914] br0: port 5(ath1.1) entered blocking state
  332. [  122.233706] br0: port 5(ath1.1) entered forwarding state
  333. [  122.315491] IPv6: ADDRCONF(NETDEV_CHANGE): ath1.1: link becomes ready
  334. [  123.799155] device vlan2 entered promiscuous mode
  335. [  124.027725] fast-classifier (PBR safe v2.1.6b): starting up
  336. [  124.037036] fast-classifier: registered
  337. [  126.147540] device vlan2 left promiscuous mode
  338. [  461.948851] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement