API tools faq
paste
icez

Untitled

icez
Feb 4th, 2021
131
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.31 KB | None | 0 0
raw download clone embed print report
  1.  
  2. === START OF READ SMART DATA SECTION ===
  3. SMART overall-health self-assessment test result: PASSED
  4.  
  5. General SMART Values:
  6. Offline data collection status: (0x82) Offline data collection activity
  7. was completed without error.
  8. Auto Offline Data Collection: Enabled.
  9. Self-test execution status: ( 0) The previous self-test routine completed
  10. without error or no self-test has ever
  11. been run.
  12. Total time to complete Offline
  13. data collection: ( 87) seconds.
  14. Offline data collection
  15. capabilities: (0x5b) SMART execute Offline immediate.
  16. Auto Offline data collection on/off support.
  17. Suspend Offline collection upon new
  18. command.
  19. Offline surface scan supported.
  20. Self-test supported.
  21. No Conveyance Self-test supported.
  22. Selective Self-test supported.
  23. SMART capabilities: (0x0003) Saves SMART data before entering
  24. power-saving mode.
  25. Supports SMART auto save timer.
  26. Error logging capability: (0x01) Error logging supported.
  27. General Purpose Logging supported.
  28. Short self-test routine
  29. recommended polling time: ( 2) minutes.
  30. Extended self-test routine
  31. recommended polling time: (1310) minutes.
  32. SCT capabilities: (0x003d) SCT Status supported.
  33. SCT Error Recovery Control supported.
  34. SCT Feature Control supported.
  35. SCT Data Table supported.
  36.  
  37. SMART Attributes Data Structure revision number: 16
  38. Vendor Specific SMART Attributes with Thresholds:
  39. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  40. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  41. 2 Throughput_Performance 0x0005 130 130 054 Pre-fail Offline - 100
  42. 3 Spin_Up_Time 0x0007 176 176 024 Pre-fail Always - 387 (Average 359)
  43. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 11
  44. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  45. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  46. 8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 15
  47. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 138
  48. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  49. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
  50. 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
  51. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20
  52. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 20
  53. 194 Temperature_Celsius 0x0002 222 222 000 Old_age Always - 27 (Min/Max 25/54)
  54. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  55. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  56. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  57. 199 UDMA_CRC_Error_Count 0x000a 199 199 000 Old_age Always - 1773
  58.  
  59. SMART Error Log Version: 1
  60. ATA Error Count: 1773 (device log contains only the most recent five errors)
  61. CR = Command Register [HEX]
  62. FR = Features Register [HEX]
  63. SC = Sector Count Register [HEX]
  64. SN = Sector Number Register [HEX]
  65. CL = Cylinder Low Register [HEX]
  66. CH = Cylinder High Register [HEX]
  67. DH = Device/Head Register [HEX]
  68. DC = Device Command Register [HEX]
  69. ER = Error register [HEX]
  70. ST = Status register [HEX]
  71. Powered_Up_Time is measured from power on, and printed as
  72. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  73. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  74.  
  75. Error 1773 occurred at disk power-on lifetime: 42 hours (1 days + 18 hours)
  76. When the command that caused the error occurred, the device was active or idle.
  77.  
  78. After command completion occurred, registers were:
  79. ER ST SC SN CL CH DH
  80. -- -- -- -- -- -- --
  81. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  82.  
  83. Commands leading to the command that caused the error were:
  84. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  85. -- -- -- -- -- -- -- -- ---------------- --------------------
  86. 60 00 00 00 c8 00 40 00 21:04:05.666 READ FPDMA QUEUED
  87. 2f 00 01 10 00 00 00 00 21:04:05.666 READ LOG EXT
  88. 60 00 08 00 cc 00 40 00 21:04:05.666 READ FPDMA QUEUED
  89. 60 00 00 00 c4 00 40 00 21:04:05.663 READ FPDMA QUEUED
  90. 60 00 00 00 bc 00 40 00 21:04:05.659 READ FPDMA QUEUED
  91.  
  92. Error 1772 occurred at disk power-on lifetime: 42 hours (1 days + 18 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 60 00 00 00 0c 00 40 00 21:04:05.563 READ FPDMA QUEUED
  104. 2f 00 01 10 00 00 00 00 21:04:05.563 READ LOG EXT
  105. 60 00 00 00 08 00 40 00 21:04:05.560 READ FPDMA QUEUED
  106. 60 00 00 00 04 00 40 00 21:04:05.558 READ FPDMA QUEUED
  107. 60 00 00 00 fc ff 40 00 21:04:05.554 READ FPDMA QUEUED
  108.  
  109. Error 1771 occurred at disk power-on lifetime: 42 hours (1 days + 18 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 60 00 00 00 74 ff 40 00 21:04:05.469 READ FPDMA QUEUED
  121. 60 00 08 00 6c ff 40 00 21:04:05.463 READ FPDMA QUEUED
  122. 60 00 00 00 68 ff 40 00 21:04:05.462 READ FPDMA QUEUED
  123. 60 00 00 00 64 ff 40 00 21:04:05.460 READ FPDMA QUEUED
  124. 60 00 00 00 5c ff 40 00 21:04:05.458 READ FPDMA QUEUED
  125.  
  126. Error 1770 occurred at disk power-on lifetime: 42 hours (1 days + 18 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 60 00 00 00 54 ff 40 00 21:04:05.437 READ FPDMA QUEUED
  138. 60 00 00 00 4c ff 40 00 21:04:05.431 READ FPDMA QUEUED
  139. 60 00 00 00 48 ff 40 00 21:04:05.429 READ FPDMA QUEUED
  140. 60 00 00 00 44 ff 40 00 21:04:05.427 READ FPDMA QUEUED
  141. 60 00 00 00 3c ff 40 00 21:04:05.423 READ FPDMA QUEUED
  142.  
  143. Error 1769 occurred at disk power-on lifetime: 42 hours (1 days + 18 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 60 00 00 00 ec fe 40 00 21:04:05.375 READ FPDMA QUEUED
  155. 60 00 00 00 e8 fe 40 00 21:04:05.372 READ FPDMA QUEUED
  156. 60 00 00 00 e4 fe 40 00 21:04:05.370 READ FPDMA QUEUED
  157. 60 00 00 00 dc fe 40 00 21:04:05.366 READ FPDMA QUEUED
  158. 60 00 00 00 d8 fe 40 00 21:04:05.364 READ FPDMA QUEUED
  159.  
  160. SMART Self-test log structure revision number 1
  161. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  162. # 1 Short offline Completed without error 00% 0 -
  163.  
  164. SMART Selective self-test log data structure revision number 1
  165. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  166. 1 0 0 Not_testing
  167. 2 0 0 Not_testing
  168. 3 0 0 Not_testing
  169. 4 0 0 Not_testing
  170. 5 0 0 Not_testing
  171. Selective self-test flags (0x0):
  172. After scanning selected spans, do NOT read-scan remainder of disk.
  173. If Selective self-test is pending on power-up, resume after 0 minute delay.
  174.  
  175.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!