API tools faq
paste
Advertisement
tthtlc

Technexion Blizzard's Android with 2.3.4

tthtlc
Jun 2nd, 2012
184
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.49 KB | None | 0 0
raw download clone embed print report
  1. <5>[ 0.000000] Linux version 2.6.37 (tapani@triceratops) (gcc version 4.4.3 2
  2. <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53cf
  3. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction ce
  4. <4>[ 0.000000] Machine: TDM3730
  5. <6>[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  6. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. <6>[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  8. <6>[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  9. <7>[ 0.000000] On node 0 totalpages: 114688
  10. <7>[ 0.000000] free_area_init_node: node 0, pgdat c05475e8, node_mem_map c050
  11. <7>[ 0.000000] Normal zone: 1024 pages used for memmap
  12. <7>[ 0.000000] Normal zone: 0 pages reserved
  13. <7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
  14. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. <7>[ 0.000000] pcpu-alloc: [0] 0
  16. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total4
  17. <5>[ 0.000000] Kernel command line: console=ttyO0,115200n8 androidboot.consot
  18. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  19. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 byte)
  20. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  21. <6>[ 0.000000] Memory: 76MB 372MB = 448MB total
  22. <5>[ 0.000000] Memory: 448620k/448620k available, 22420k reserved, 0K highmem
  23. <5>[ 0.000000] Virtual kernel memory layout:
  24. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  26. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  27. <5>[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  28. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  29. <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  30. <5>[ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
  31. <5>[ 0.000000] .text : 0xc002f000 - 0xc0509000 (4968 kB)
  32. <5>[ 0.000000] .data : 0xc050a000 - 0xc0547ee0 ( 248 kB)
  33. <6>[ 0.000000] NR_IRQS:409
  34. <6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  35. <6>[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  36. <6>[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 inters
  37. <6>[ 0.000000] Total of 96 interrupts on 1 active controller
  38. <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  39. <4>[ 0.000000] Console: colour dummy device 80x30
  40. <6>[ 0.000000] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  41. <6>[ 0.000000] pid_max: default: 32768 minimum: 301
  42. <4>[ 0.000000] Mount-cache hash table entries: 512
  43. <6>[ 0.000000] CPU: Testing write buffer coherency: ok
  44. <6>[ 0.000000] regulator: core version 0.5
  45. <6>[ 0.000000] regulator: dummy:
  46. <6>[ 0.000000] NET: Registered protocol family 16
  47. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  48. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  49. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  50. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  51. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  52. <6>[ 0.000000] OMAP GPIO hardware version 2.5
  53. <6>[ 0.000000] GPMC revision 5.0
  54. <4>[ 0.000000] Trying to install interrupt handler for IRQ402
  55. <4>[ 0.000000] Trying to install interrupt handler for IRQ403
  56. <4>[ 0.000000] Trying to install interrupt handler for IRQ404
  57. <4>[ 0.000000] Trying to install interrupt handler for IRQ405
  58. <4>[ 0.000000] Trying to install interrupt handler for IRQ406
  59. <4>[ 0.000000] Trying to install interrupt handler for IRQ407
  60. <4>[ 0.000000] Trying to install interrupt handler for IRQ408
  61. <3>[ 0.000000] Trying to install type control for IRQ409
  62. <3>[ 0.000000] Trying to set irq flags for IRQ409
  63. <6>[ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
  64. <7>[ 0.000000] gpio_request: gpio-198 (LCD_ENBKL) status -22
  65. <7>[ 0.000000] gpio_direction_output: gpio-198 status -22
  66. <3>[ 0.000000] Could not look up dss_core
  67. <6>[ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
  68. <4>[ 0.000000] ------------[ cut here ]------------
  69. <4>[ 0.000000] WARNING: at arch/arm/mach-omap2/clock.c:438 omap2_clk_switch_)
  70. <4>[ 0.000000] clock: dpll1_ck: unable to set MPU rate to 1000: -22
  71. <4>[ 0.000000] Modules linked in:
  72. <4>[ 0.000000] Backtrace:
  73. <4>[ 0.000000] [<c003eb28>] (dump_backtrace+0x0/0x110) from [<c03ae49c>] (du)
  74. <4>[ 0.000000] r7:00000009 r6:000001b6 r5:c0010368 r4:dec2bf38
  75. <4>[ 0.000000] [<c03ae484>] (dump_stack+0x0/0x1c) from [<c006282c>] (warn_sl)
  76. <4>[ 0.000000] [<c00627d8>] (warn_slowpath_common+0x0/0x6c) from [<c00628e8>)
  77. <4>[ 0.000000] r9:00000000 r8:00000000 r7:00000000 r6:c049c1c6 r5:c002b820
  78. <4>[ 0.000000] r4:c0513d30
  79. <4>[ 0.000000] [<c00628b0>] (warn_slowpath_fmt+0x0/0x40) from [<c0010368>] ()
  80. <4>[ 0.000000] r3:c049c1c6 r2:c049f58b
  81. <4>[ 0.000000] [<c00102e0>] (omap2_clk_switch_mpurate_at_boot+0x0/0xbc) from)
  82. <4>[ 0.000000] r6:c0065a44 r5:c001039c r4:c00272b4
  83. <4>[ 0.000000] [<c001039c>] (omap3xxx_clk_arch_init+0x0/0x44) from [<c002f3e)
  84. <4>[ 0.000000] r5:c001039c r4:c00272b4
  85. <4>[ 0.000000] [<c002f308>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (k)
  86. <4>[ 0.000000] [<c00083a8>] (kernel_init+0x0/0x154) from [<c0065a44>] (do_ex)
  87. <4>[ 0.000000] r5:c00083a8 r4:00000000
  88. <4>[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
  89. <6>[ 0.000000] OMAP DMA hardware revision 5.0
  90. <7>[ 0.000030] VRAM: adding region paddr 9f400000 size 12582912
  91. <4>[ 0.022979] bio: create slab <bio-0> at 0
  92. <6>[ 0.024139] regulator: vmmc: 3300 mV normal standby
  93. <5>[ 0.025756] SCSI subsystem initialized
  94. <6>[ 0.028503] usbcore: registered new interface driver usbfs
  95. <6>[ 0.028717] usbcore: registered new interface driver hub
  96. <6>[ 0.028961] usbcore: registered new device driver usb
  97. <6>[ 0.030242] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  98. <6>[ 0.033172] twl4030: PIH (irq 7) chaining IRQs 368..375
  99. <6>[ 0.033203] twl4030: power (irq 373) chaining IRQs 376..383
  100. <6>[ 0.033721] twl4030: gpio (irq 368) chaining IRQs 384..401
  101. <6>[ 0.036773] regulator: VUSB1V5: 1500 mV normal standby
  102. <6>[ 0.037384] regulator: VUSB1V8: 1800 mV normal standby
  103. <6>[ 0.037933] regulator: VUSB3V1: 3100 mV normal standby
  104. <6>[ 0.041290] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  105. <6>[ 0.042633] regulator: VPLL1: 1000 <--> 1800 mV at 1800 mV normal standby
  106. <6>[ 0.044433] regulator: VIO: 1800 mV normal standby
  107. <6>[ 0.045074] regulator: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  108. <6>[ 0.045715] regulator: VDAC: 1800 mV normal standby
  109. <6>[ 0.046325] regulator: VAUX2_4030: 2800 mV normal standby
  110. <6>[ 0.046905] regulator: VPLL2: 1800 mV normal standby
  111. <3>[ 0.047180] twl_reg twl_reg.5: can't register VPLL2, -16
  112. <4>[ 0.047180] twl_reg: probe of twl_reg.5 failed with error -16
  113. <3>[ 0.047729] machine_constraints_voltage: unsupportable 'VMMC2' voltage cos
  114. <3>[ 0.047912] twl_reg twl_reg.7: can't register VMMC2, -22
  115. <4>[ 0.047943] twl_reg: probe of twl_reg.7 failed with error -22
  116. <6>[ 0.048583] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  117. <6>[ 0.048828] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  118. <6>[ 0.063995] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
  119. <6>[ 0.065917] Advanced Linux Sound Architecture Driver Version 1.0.23.
  120. <6>[ 0.067260] cfg80211: Calling CRDA to update world regulatory domain
  121. <6>[ 0.067535] Switching to clocksource 32k_counter
  122. <6>[ 0.086486] musb-hdrc: version 6.0, otg (peripheral+host), debug=0
  123. <6>[ 0.086639] musb-hdrc musb-hdrc.0: dma type: dma-inventra
  124. <7>[ 0.086639] HS USB OTG: revision 0x40, sysconfig 0x2001, sysstatus 0x1, i0
  125. <7>[ 0.086700] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, )
  126. <7>[ 0.086730] musb-hdrc: MHDRC RTL version 1.800
  127. <7>[ 0.086761] musb-hdrc: setup fifo_mode 4
  128. <7>[ 0.086791] musb-hdrc: 28/31 max ep, 16384/16384 memory
  129. <6>[ 0.086914] musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 us2
  130. <7>[ 0.086944] Registered /proc/driver/musb_hdrc.0
  131. <6>[ 0.087615] NET: Registered protocol family 2
  132. <6>[ 0.087829] IP route cache hash table entries: 4096 (order: 2, 16384 byte)
  133. <6>[ 0.088317] TCP established hash table entries: 16384 (order: 5, 131072 b)
  134. <6>[ 0.088714] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  135. <6>[ 0.088958] TCP: Hash tables configured (established 16384 bind 16384)
  136. <6>[ 0.088989] TCP reno registered
  137. <6>[ 0.088989] UDP hash table entries: 256 (order: 0, 4096 bytes)
  138. <6>[ 0.089019] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  139. <6>[ 0.089233] NET: Registered protocol family 1
  140. <4>[ 0.089324] NetWinder Floating Point Emulator V0.97 (double precision)
  141. <6>[ 0.090881] omap-iommu omap-iommu.0: isp registered
  142. <6>[ 0.106170] ashmem: initialized
  143. <6>[ 0.107513] msgmni has been set to 876
  144. <6>[ 0.108703] io scheduler noop registered
  145. <6>[ 0.108734] io scheduler deadline registered
  146. <6>[ 0.108856] io scheduler cfq registered (default)
  147. <4>[ 0.110443] Generic Backlight Driver Initialized.
  148. <6>[ 0.111267] OMAP DSS rev 2.0
  149. <6>[ 0.111358] OMAP DISPC rev 3.0
  150. <6>[ 0.111389] OMAP VENC rev 2
  151. <6>[ 0.111724] OMAP DSI rev 1.0
  152. <6>[ 0.274627] sil9022 3-0039: <sil9022_set_cm_clkout_ctrl> sil9022 HDMI Chi
  153. <6>[ 0.436309] [drm] Initialized drm 1.1.0 20060810
  154. <6>[ 0.436340] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  155. <6>[ 0.438201] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UA0
  156. <6>[ 1.258300] console [ttyO0] enabled
  157. <6>[ 1.262359] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UA1
  158. <6>[ 1.270141] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UA2
  159. <6>[ 1.277893] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UA3
  160. <6>[ 1.288116] omap2-nand driver initializing
  161. <6>[ 1.292694] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAN)
  162. <5>[ 1.302032] cmdlinepart partition parsing not available
  163. <5>[ 1.307525] Creating 5 MTD partitions on "omap2-nand.0":
  164. <5>[ 1.313110] 0x000000000000-0x000000080000 : "X-Loader"
  165. <5>[ 1.320190] 0x000000080000-0x000000260000 : "U-Boot"
  166. <5>[ 1.327667] 0x000000260000-0x000000280000 : "U-Boot Env"
  167. <5>[ 1.334747] 0x000000280000-0x000000680000 : "Kernel"
  168. <5>[ 1.343017] 0x000000680000-0x000020000000 : "File System"
  169. <6>[ 1.561340] smsc911x: Driver version 2008-10-21.
  170. <6>[ 1.567810] smsc911x-mdio: probed
  171. <6>[ 1.571350] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fff)
  172. <6>[ 1.580261] net eth0: MAC Address: 00:1f:7b:20:00:cc
  173. <6>[ 1.585906] usbcore: registered new interface driver asix
  174. <6>[ 1.591827] usbcore: registered new interface driver cdc_ether
  175. <6>[ 1.598144] usbcore: registered new interface driver net1080
  176. <6>[ 1.604248] usbcore: registered new interface driver cdc_subset
  177. <6>[ 1.610687] usbcore: registered new interface driver zaurus
  178. <6>[ 1.616577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  179. <6>[ 1.645843] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  180. <6>[ 1.651855] ehci-omap ehci-omap.0: new USB bus registered, assigned bus n1
  181. <6>[ 1.659759] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  182. <6>[ 1.677246] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  183. <6>[ 1.683349] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  184. <6>[ 1.690490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNum1
  185. <6>[ 1.698089] usb usb1: Product: OMAP-EHCI Host Controller
  186. <6>[ 1.703674] usb usb1: Manufacturer: Linux 2.6.37 ehci_hcd
  187. <6>[ 1.709350] usb usb1: SerialNumber: ehci-omap.0
  188. <6>[ 1.714996] hub 1-0:1.0: USB hub found
  189. <6>[ 1.719024] hub 1-0:1.0: 3 ports detected
  190. <6>[ 1.747741] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  191. <6>[ 1.754669] usbcore: registered new interface driver uas
  192. <6>[ 1.760253] Initializing USB Mass Storage driver...
  193. <6>[ 1.765899] usbcore: registered new interface driver usb-storage
  194. <6>[ 1.772216] USB Mass Storage support registered.
  195. <6>[ 1.777557] usbcore: registered new interface driver usbserial
  196. <6>[ 1.783874] USB Serial support registered for generic
  197. <6>[ 1.789428] usbcore: registered new interface driver usbserial_generic
  198. <6>[ 1.796295] usbserial: USB Serial Driver core
  199. <6>[ 1.801025] USB Serial support registered for GSM modem (1-port)
  200. <6>[ 1.807647] usbcore: registered new interface driver option
  201. <6>[ 1.813507] option: v0.7.2:USB Driver for GSM modems
  202. <6>[ 1.818725] android init
  203. <6>[ 1.821533] android_probe pdata: c051ac24
  204. <6>[ 1.825958] android_bind
  205. <7>[ 1.828582] android_bind_config
  206. <6>[ 1.829254] android_usb gadget: android_usb ready
  207. <6>[ 1.834228] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  208. <6>[ 1.839904] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus n2
  209. <6>[ 1.847747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  210. <6>[ 1.854888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNum1
  211. <6>[ 1.862457] usb usb2: Product: MUSB HDRC host driver
  212. <6>[ 1.867706] usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
  213. <6>[ 1.873382] usb usb2: SerialNumber: musb-hdrc.0
  214. <6>[ 1.878906] hub 2-0:1.0: USB hub found
  215. <6>[ 1.882934] hub 2-0:1.0: 1 port detected
  216. <6>[ 1.887512] f_acm init
  217. <6>[ 1.890289] android_register_function acm
  218. <6>[ 1.894470] f_adb init
  219. <6>[ 1.896972] android_register_function adb
  220. <6>[ 1.901184] adb_bind_config
  221. <6>[ 1.904937] f_mass_storage init
  222. <6>[ 1.908508] android_register_function usb_mass_storage
  223. <6>[ 1.913909] f_mtp init
  224. <6>[ 1.916381] android_register_function mtp
  225. <6>[ 1.921020] mice: PS/2 mouse device common for all mice
  226. <6>[ 1.927154] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  227. <6>[ 1.935607] ads7846 spi1.0: touchscreen, irq 296
  228. <6>[ 1.941009] input: ADS7846 Touchscreen as /devices/platform/omap2_mcspi.11
  229. <6>[ 1.951782] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.12
  230. <6>[ 1.965881] using rtc device, ds1337, for alarms
  231. <6>[ 1.970672] rtc-ds1307 3-0068: rtc core: registered ds1337 as rtc0
  232. <6>[ 1.977539] i2c /dev entries driver
  233. <6>[ 1.982604] Linux media interface: v0.10
  234. <6>[ 1.986907] Linux video capture interface: v2.00
  235. <6>[ 1.993713] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  236. <6>[ 2.000335] cpuidle: using governor ladder
  237. <6>[ 2.004638] cpuidle: using governor menu
  238. <4>[ 2.009613] mmci-omap-hs.0 supply vmmc_aux not found, using dummy regulatr
  239. <7>[ 2.020751] gpio_request: gpio-211 (tdm3730board::usr0) status -22
  240. <4>[ 2.020782] leds-gpio: probe of leds-gpio failed with error -22
  241. <6>[ 2.027252] omap_sham_mod_init: loading omap-sham driver
  242. <3>[ 2.032836] omap_sham_mod_init: Unsupported cpu
  243. <6>[ 2.037597] omap_aes_mod_init: loading omap-aes driver
  244. <3>[ 2.042999] omap_aes_mod_init: Unsupported cpu
  245. <6>[ 2.047729] usb 1-2: new high speed USB device using ehci-omap and addres2
  246. <6>[ 2.056030] usbcore: registered new interface driver usbhid
  247. <6>[ 2.061920] usbhid: USB HID core driver
  248. <6>[ 2.066589] logger: created 64K log 'log_main'
  249. <6>[ 2.071594] logger: created 256K log 'log_events'
  250. <6>[ 2.076782] logger: created 64K log 'log_radio'
  251. <6>[ 2.081787] logger: created 64K log 'log_system'
  252. <4>[ 2.088775] OMAP3 TAO/TDM SoC Sound init
  253. <6>[ 2.171112] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  254. <6>[ 2.187103] ALSA device list:
  255. <6>[ 2.190246] #0: omap3taotdm
  256. <6>[ 2.193634] TCP cubic registered
  257. <6>[ 2.197052] NET: Registered protocol family 17
  258. <6>[ 2.201812] NET: Registered protocol family 15
  259. <6>[ 2.206481] lib80211: common routines for IEEE802.11 drivers
  260. <7>[ 2.212493] lib80211_crypt: registered algorithm 'NULL'
  261. <6>[ 2.212493] VFP support v0.3: implementor 41 architecture 3 part 30 varia3
  262. <6>[ 2.221130] ThumbEE CPU extension supported.
  263. <6>[ 2.226409] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
  264. <6>[ 2.233489] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumb0
  265. <6>[ 2.240997] usb 1-2: Product: USB2.0 Hub
  266. <3>[ 2.246551] Power Management for TI OMAP3.
  267. <6>[ 2.252685] hub 1-2:1.0: USB hub found
  268. <6>[ 2.257141] hub 1-2:1.0: 4 ports detected
  269. <6>[ 2.262725] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver d
  270. <4>[ 2.270935] smartreflex: probe of smartreflex.0 failed with error -22
  271. <6>[ 2.277740] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver d
  272. <4>[ 2.285980] smartreflex: probe of smartreflex.1 failed with error -22
  273. <3>[ 2.293487] sr_init: platform driver register failed for SR
  274. <6>[ 2.299377] SmartReflex Class3 initialized
  275. <6>[ 2.303680] clock: disabling unused clocks to save power
  276. <4>[ 2.312377] reserving 4194304 bytes at 9cf36008 for fb 0
  277. <7>[ 2.317993] VRAM: reserve mem paddr 9cf36008 size 4194304
  278. <7>[ 2.318084] VRAM: checking region 9f400000 3072
  279. <4>[ 2.318115] Failed. Allocating 4194304 bytes for fb 0
  280. <7>[ 2.323425] VRAM: alloc mem type 0 size 4194304 paddr dec2bd4c
  281. <7>[ 2.323455] VRAM: checking region 9f400000 3072
  282. <7>[ 2.323455] VRAM: found 9f400000, end a0000000
  283. <4>[ 2.341583] allocating 4194304 bytes for fb 1
  284. <7>[ 2.346191] VRAM: alloc mem type 0 size 4194304 paddr dec2bd44
  285. <7>[ 2.346221] VRAM: checking region 9f400000 3072
  286. <7>[ 2.346221] VRAM: found 9f800000, end a0000000
  287. <4>[ 2.346374] allocating 4194304 bytes for fb 2
  288. <7>[ 2.350982] VRAM: alloc mem type 0 size 4194304 paddr dec2bd44
  289. <7>[ 2.351013] VRAM: checking region 9f400000 3072
  290. <7>[ 2.351013] VRAM: found 9fc00000, end a0000000
  291. <4>[ 2.361907] Console: switching to colour frame buffer device 100x30
  292. <4>[ 2.444763] omapdss DPI: Could not find exact pixel clock. Requested 3326z
  293. <4>[ 2.457946] mmc0: host does not support reading read-only switch. assumin.
  294. <6>[ 2.481994] mmc0: new high speed SDHC card at address 935e
  295. <6>[ 2.488250] mmcblk0: mmc0:935e SD04G 3.69 GiB
  296. <6>[ 2.495086] mmcblk0: p1 p2
  297. <4>[ 2.506408] regulator_init_complete: incomplete constraints, leaving VDACn
  298. <6>[ 2.514556] rtc-ds1307 3-0068: setting system clock to 2012-06-03 00:43:3)
  299. <3>[ 2.523712] omap_vout omap_vout: probed for an unknown device
  300. <6>[ 2.566223] android_usb gadget: high speed config #1: android
  301. <7>[ 2.661010] EXT4-fs (mmcblk0p2): ext4_orphan_cleanup: truncating inode 80s
  302. <6>[ 2.854858] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
  303. <6>[ 2.860260] EXT4-fs (mmcblk0p2): recovery complete
  304. <6>[ 2.882202] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mod)
  305. <4>[ 2.890899] VFS: Mounted root (ext3 filesystem) on device 179:2.
  306. <6>[ 2.897247] Freeing init memory: 156K
  307. <3>[ 2.955566] init: /init.rc: 216: invalid option 'enabled'
  308. <3>[ 3.046417] init: cannot open '/initlogo.rle'
  309. <3>[ 3.134002] init: cannot find '/system/etc/install-recovery.sh', disablin'
  310. <6>[ 3.203643] enabling adb
  311. <6>[ 3.224273] adb_open
  312. <6>[ 3.508575] warning: `dhcpcd' uses 32-bit capabilities (legacy support in)
  313. <6>[ 3.517089] adb_release
  314. <6>[ 3.520355] adb_open
  315. <6>[ 3.684997] net eth0: SMSC911x/921x identified at 0xe0810000, IRQ: 161
  316. <6>[ 3.705139] android_usb gadget: high speed config #1: android
  317. <7>[ 3.711181] musb-hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 52
  318. <7>[ 3.711181] musb-hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket2
  319. <4>[ 19.306945] er.ServerThread (1042): /proc/1029/oom_adj is deprecated, ple.
  320. # vf # vf # v #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!