VBus is low (not a "chinese charger"), SoftService is not asserted...
CONF_FUSE 0-4 = 0x0077bd4b 0x02041447 0x30044809 0xbc67bb5f 0x0020c3f0
HW_REVISION_NUMBER = 0x202400e1
OEM_ID = 0x00010001

SEMCSEC Secure Bootstrap "1226-2253 S1Boot QSD8x50 CRH1099189_R8A033" (2010-09-28 12:04)
Detected memories:
 SMI CS0: Samsung 64MB LPDDR (SR 0x4e01)
 EBI1 CS0: Micron 256MB LPDDR (SR 0x640f)
 EBI1 CS1: Micron 128MB LPDDR (SR 0x6c0f)
 EBI2 CS0: Micron 1024MB NAND (0x002c 0x00b3)
OTP User segment locked
OTP User segment locked
TA @ 0x08100000 (8*128kB)
Hardware Config: verification OK
MSN=CB511TLMFQ IMEI=01259000617646
OTP User segment locked
Service Mode Config From TA: KEYS:1 USB:ON SERVICEMODE:USB SERVICE_PIN:ENABLED
TA_ReadData FlaFla is set
S1 BOOT waiting for USB connection
s1_main_loop: No Service mode comm interface found!
Configuring long press:800
plf_bootos QSD8x50
Startup reason before override: PWRKEY
Partition table contents:
 PartID     Descr   Attribs    StartBlock NumBlocks  UsedAs
 0x00000001 S1Boot  0x00000022 0x00000000 0x00000001
 0x00000002 TA      0x00000001 0x00000008 0x00000008
 0x00000005 ModemSW 0x00000022 0x00000016 0x000000bf mARM image
 0x00000008 AppDSP  0x00000022 0x000001d3 0x000000a2 aDSP image
 0x0000000f AppsFS3 0x00000001 0x00001c64 0x0000037a
 0x0000000b FOTA0   0x00000022 0x0000012d 0x00000022
 0x0000000c FOTA1   0x00000022 0x0000014f 0x00000022
 0x00000003 Linux   0x00000022 0x00000275 0x00000062 aARM image
 0x00000006 ModemFS 0x00000001 0x000000d5 0x00000058 mARM-FS image
 0x00000004 AppsFS1 0x00000001 0x000002d7 0x00000b05
 0x00000009 AppsFS2 0x00000001 0x00000ddc 0x00000e88
 0x0000000e Recover 0xc0000022 0x00000171 0x00000062
 0x00000010 AppLog  0x80000001 0x00001fde 0x00000022
ARM ELF image (0x0028), entry point @ 0x00400000
QDSP6 ELF image (0x00a4), entry point @ 0x2e802000
Invalid ELF magic (0x4200017e)
SIN Verification of aARM failed!
Invalid ELF magic (0x4200017e)
plf_ta_cmd_params()
Adding TA 8a2 as 8a2 to commandline
ta_to_cmdline() unit is 8a2 label is 8a2
The label string is:000008A2.
The data string is:58313069.
The new command line entry:semcandroidboot.000008A2=58313069
Commandline:semcandroidboot.serialno=CB511TLMFQ semcandroidboot.startup=0x00000001 semcandroidboot.000008A2=58313069.
Warmboot address calculated: 0x00000000
TCSR_SPARE2(SA_fuse)=0xa037, EF_CFG2=0x40040801, EF_CFG3=0x04024002, EF_CFG4=0xed41e600, EF_CFG6=0x083007e0
Longpress OK - starting up
EBI1 MPU Partition 0 start:0x2e802000 end:0x2fe26000
SMI  MPU Partition 0 start:0x00400000 end:0x02585000
SMI  MPU Partition 1 start:0x00200000 end:0x00400000
NAND MPU Partition 0 start:0x00001fde end:0x00002000
NAND MPU Partition 1 start:0x00000171 end:0x000001d3
NAND MPU OFF according to partition table
Jumping to code @ 0x00400000, goodbye and thanks for all the fish...