Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Startup
- [ 11.784200 / 04-28 20:01:23.673][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 11.784293 / 04-28 20:01:23.673][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 11.784374 / 04-28 20:01:23.673][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 11.784407 / 04-28 20:01:23.673][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 11.784493 / 04-28 20:01:23.673][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 11.784525 / 04-28 20:01:23.673][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 11.784603 / 04-28 20:01:23.673][2] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 11.784679 / 04-28 20:01:23.673][2] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 11.784752 / 04-28 20:01:23.673][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 11.784780 / 04-28 20:01:23.673][2] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 11.784876 / 04-28 20:01:23.673][2] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 11.784901 / 04-28 20:01:23.673][2] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 11.784976 / 04-28 20:01:23.673][2] es9218_left_volume_get(): Left Volume= -0 db
- [ 11.785057 / 04-28 20:01:23.673][2] es9218_right_volume_get(): Right Volume= -0 db
- [ 11.785138 / 04-28 20:01:23.673][2] es9218_master_volume_get(): Master Volume= -0 db
- [ 11.785219 / 04-28 20:01:23.673][2] es9218_filter_enum_get(): ucontrol = 8
- [ 11.785297 / 04-28 20:01:23.673][2] es9218_power_state_get(): power state = 0
- [ 11.785323 / 04-28 20:01:23.673][2] es9218_power_state_get(): ucontrol = 0
- [ 11.785403 / 04-28 20:01:23.673][2] es9218_clk_divider_get() : invalid state = CLOSE
- [ 11.785480 / 04-28 20:01:23.673][2] es9218_chip_state_get(): enter
- [ 11.785530 / 04-28 20:01:23.673][2] es9218_power_gpio_H(): pa_gpio_level = 1
- [ 11.786572 / 04-28 20:01:23.673][2] es9218_reset_gpio_H(): pa_gpio_level = 1
- [ 11.787957 / 04-28 20:01:23.673][2] es9218_chip_state_get : i2_read success : 0
- [ 11.788006 / 04-28 20:01:23.673][2] es9218_reset_gpio_L(): pa_gpio_level = 0
- [ 11.788034 / 04-28 20:01:23.673][2] es9218_chip_state_get(): leave
- [ 11.788233 / 04-28 20:01:23.673][2] es9218_avc_volume_get(): AVC Volume= -0 db
- [ 11.788326 / 04-28 20:01:23.673][2] es9218_headset_type_get(): type = 0 [ 11.788407 / 04-28 20:01:23.673][2] es9218_dop_get() 0
- [ 11.788485 / 04-28 20:01:23.673][2] es9218_auto_mute_get(): type = 0
- [ 11.788568 / 04-28 20:01:23.673][2] es9218_sabre_wcdon2bypass_get(): power state = 0
- [ 204.821861 / 04-28 13:07:37.822][2] [LGE MBHC] wcd_mbhc_mech_plug_detect_irq: enter
- [ 204.821958 / 04-28 13:07:37.822][2] [LGE MBHC] wcd_mbhc_mech_plug_detect_irq: call #4 es9218_sabre_headphone_on()
- Plugging in Headphones
- [ 204.821996 / 04-28 13:07:37.822][2] es9218_sabre_headphone_on() Called !!
- [ 204.822034 / 04-28 13:07:37.822][2] __es9218_sabre_headphone_on(): entry: state = CLOSE
- [ 204.822067 / 04-28 13:07:37.822][2] __es9218_sabre_headphone_on() : ESS_B Running !!
- [ 204.822144 / 04-28 13:07:37.822][2] es9218_hph_switch_gpio_L(): hph_switch = 0
- [ 204.822196 / 04-28 13:07:37.822][2] es9218_power_gpio_H(): pa_gpio_level = 1
- [ 204.822229 / 04-28 13:07:37.822][2] es9218_sabre_chargepump_start(): entry: state = CLOSE
- [ 204.822283 / 04-28 13:07:37.822][2] es9218_reset_gpio_H(): pa_gpio_level = 1
- [ 204.829007 / 04-28 13:07:37.832][2] es9218_hph_switch_gpio_H(): hph_switch = 1
- [ 204.829066 / 04-28 13:07:37.832][2] es9218_reset_gpio_L(): pa_gpio_level = 0
- [ 204.830681 / 04-28 13:07:37.832][2] [LGE MBHC]@@@ check micb en status =1
- [ 204.830773 / 04-28 13:07:37.832][2] [LGE MBHC] wcd_mbhc_mech_plug_detect_irq: leave 1
- [ 204.852052 / 04-28 13:07:37.852][2] [LGE MBHC] wcd_mbhc_btn_press_handler: enter
- [ 204.852500 / 04-28 13:07:37.852][2] [LGE MBHC] wcd_correct_swch_plug: Valid plug found, plug type is 2
- [ 204.858417 / 04-28 13:07:37.852][2] [LGE MBHC] wcd_mbhc_find_plug_and_report: enter current_plug(0) new_plug(2)
- [ 204.958982 / 04-28 13:07:37.962][0] qpnp_pon_input_dispatch: code(114), value(2)
- [ 204.959143 / 04-28 13:07:37.962][0] lge_set_key_crash_cnt: Ready to panic 114 : count 1, time gap 4294872256!
- [ 205.007504 / 04-28 13:07:38.002][2] es9218_sabre_headphone_on() Called !!
- [ 205.007571 / 04-28 13:07:38.002][2] __es9218_sabre_headphone_on(): entry: state = BYPASS
- [ 205.007600 / 04-28 13:07:38.002][2] __es9218_sabre_headphone_on() : state = BYPASS , skip enabling EDO.
- [ 205.007627 / 04-28 13:07:38.002][2] [LGE MBHC] Impedance zl: 35, zr:36
- [ 205.007656 / 04-28 13:07:38.002][2] [LGE MBHC] sdev.name: h2w
- [ 205.007683 / 04-28 13:07:38.002][2] [LGE MBHC] 3 Pin Headset is Inserted. jack_type=0x1
- [ 205.007727 / 04-28 13:07:38.002][2] [LGE MBHC] sdev state: 2, sdev name: h2w
- [ 205.007754 / 04-28 13:07:38.002][2] wcd_mbhc_jack_report: status:0x9, mask:0x3cf
- [ 205.007884 / 04-28 13:07:38.002][3] [Touch] NOTIFY_EARJACK!
- [ 205.007923 / 04-28 13:07:38.002][3] [Touch] Earjack Type: 0x01
- [ 205.031335 / 04-28 13:07:38.032][3] [LGE MBHC] wcd_mbhc_btn_press_handler: enter
- [ 205.086548 / 04-28 13:07:38.082][0] qpnp_pon_input_dispatch: code(114), value(0)
- [ 205.254810 / 04-28 13:07:38.252][3] [LGE MBHC] wcd_mbhc_btn_press_handler: enter
- --
- [ 208.101323 / 04-28 13:07:41.102][2] [LGE MBHC] wcd_correct_swch_plug: Can be slow insertion of headphone
- [ 208.102047 / 04-28 13:07:41.102][2] [LGE MBHC] wcd_mbhc_find_plug_and_report: enter current_plug(2) new_plug(2)
- [ 208.103475 / 04-28 13:07:41.102][2] [LGE MBHC]@@@ check micb en status =1
- [ 208.103988 / 04-28 13:07:41.102][2] [LGE MBHC]@@@ check micb en status =0
- [ 208.105703 / 04-28 13:07:41.102][2] [LGE MBHC]@@@ check micb en status =0
- [ 208.106065 / 04-28 13:07:41.102][2] [LGE MBHC] wcd_correct_swch_plug: leave
- [ 208.913065 / 04-28 13:07:41.912][3] dhdpcie_suspend_dev: Enter
- [ 208.914156 / 04-28 13:07:41.912][2] [Touch] 1 finger pressed:<0>( 257,1054, 42)
- [ 208.944032 / 04-28 13:07:41.942][0] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
- [ 208.994681 / 04-28 13:07:41.992][2] [Touch] finger released:<0>( 256,1054, 44)
- [ 209.182020 / 04-28 13:07:42.182][0] es9218_sabre_wcdon2bypass_put(): entry wcd on : 1
- [ 209.182020 / 04-28 13:07:42.182][0]
- [ 209.182073 / 04-28 13:07:42.182][0] es9218_sabre_wcdon2bypass_put() : Invalid state = BYPASS !!
- [ 209.182123 / 04-28 13:07:42.182][0] es9218_sabre_wcdon2bypass_put(): exit
- [ 209.205818 / 04-28 13:07:42.212][3] RX msgq status HW:0x0, SW:2:
- [ 209.209892 / 04-28 13:07:42.212][3] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write f8 to 0xb5c
- [ 209.210092 / 04-28 13:07:42.212][3] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write f8 to 0xb70
- [ 209.228064 / 04-28 13:07:42.222][3] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write f8 to 0xb5c
- [ 209.228698 / 04-28 13:07:42.222][3] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write f8 to 0xb70
- [ 209.279326 / 04-28 13:07:42.282][2] [Touch] store_extwatch_fontonoff 1
- [ 209.279728 / 04-28 13:07:42.282][2] [Touch] ext_watch_set_mode : X[1032 , 1200] Y[0 , 160] LUT[080808]
- [ 209.280326 / 04-28 13:07:42.282][2] [Touch] ext_watch_set_position : position [0 0 48 72 120]
- [ 209.280540 / 04-28 13:07:42.282][2] [Touch] ext_watch_display_onoff(C17) : On
- [ 209.310054 / 04-28 13:07:42.312][3] lge_dsp_sound_offload_playback_number_put: current_be_id = 3, lge_effect_be_id = 3
- [ 209.362769 / 04-28 13:07:42.362][0] [LGE MBHC]@@@ check micb en status =0
- [ 209.363059 / 04-28 13:07:42.362][0] [LGE MBHC]@@@ check micb en status =0
- [ 209.369042 / 04-28 13:07:42.372][0] [LGE MBHC]@@@ check micb en status =0
- [ 209.374790 / 04-28 13:07:42.372][0] [LGE MBHC]@@@ check micb en status =0
- [ 209.376257 / 04-28 13:07:42.372][0] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write 00 to 0xb5c
- [ 209.376403 / 04-28 13:07:42.372][0] wcd9335-slim tasha-slim-pgd: regmap_bus_gather_write, Write 00 to 0xb70
- [ 209.416494 / 04-28 13:07:42.412][0] es9218_sabre_wcdon2bypass_put(): entry wcd on : 0
- [ 209.416494 / 04-28 13:07:42.412][0]
- [ 209.416563 / 04-28 13:07:42.412][0] es9218_sabre_wcdon2bypass_put() : state = BYPASS : don't change
- [ 209.416650 / 04-28 13:07:42.412][0] es9218_sabre_wcdon2bypass_put(): exit
- [ 209.417887 / 04-28 13:07:42.412][0] es9218_avc_volume_put(): AVC Volume= -8 db state = BYPASS
- [ 209.417962 / 04-28 13:07:42.412][0] es9218_avc_volume_put() : invalid state = BYPASS
- [ 209.418344 / 04-28 13:07:42.412][0] es9218_headset_type_put(): type = 1 [ 209.418344 / 04-28 13:07:42.412][0] state = BYPASS headset type update = 1
- [ 209.418395 / 04-28 13:07:42.412][0] es9218_headset_type_put() : invalid state = BYPASS
- [ 209.426859 / 04-28 13:07:42.422][0] es9218_startup(): entry
- [ 209.426933 / 04-28 13:07:42.422][0] es9218_startup() : state = BYPASS : goto HIFI !!
- [ 209.426982 / 04-28 13:07:42.422][0] __es9218_sabre_headphone_on(): entry: state = BYPASS
- [ 209.427038 / 04-28 13:07:42.422][0] __es9218_sabre_headphone_on() : state = BYPASS , skip enabling EDO.
- [ 209.427082 / 04-28 13:07:42.422][0] es9218_sabre_bypass2hifi() : state = BYPASS
- [ 209.427158 / 04-28 13:07:42.422][0] es9218_reset_gpio_H(): pa_gpio_level = 1
- [ 209.428204 / 04-28 13:07:42.422][0] es9218_sabre_bypass2hifi() : ESS_B Running !!
- [ 209.428247 / 04-28 13:07:42.422][0] es9218_sabre_bypass2hifi(): Rev-B PCM Format Reg Initial in es9218_sabre_bypass2hifi()
- [ 209.431609 / 04-28 13:07:42.432][0] es9218_set_thd(): Headset Type = 1
- [ 209.432291 / 04-28 13:07:42.432][0] es9218_sabre_bypass2hifi() : g_left_volume = 0, g_right_volume = 0
- [ 209.432348 / 04-28 13:07:42.432][0] es9218_master_trim(): MasterTrim = 7FFFFFFF
- [ 209.433465 / 04-28 13:07:42.432][0] es9218_set_avc_volume(): AVC Volume = 48
- [ 209.433778 / 04-28 13:07:42.432][0] es9218_sabre_amp_start(): Headset Type = 1
- [ 209.433819 / 04-28 13:07:42.432][0] es9218_sabre_lpb2hifione(): entry: state = BYPASS
- [ 209.452159 / 04-28 13:07:42.452][0] es9218_hph_switch_gpio_L(): hph_switch = 0
- [ 209.512534 / 04-28 13:07:42.512][3] es9218_hph_switch_gpio_H(): hph_switch = 1
- [ 209.512616 / 04-28 13:07:42.512][3] es9218_startup(): exit
- [ 209.513288 / 04-28 13:07:42.512][3] es9218_pcm_hw_params(): entry , bps : 16 , rate : 48000
- [ 209.513349 / 04-28 13:07:42.512][3] es9218_pcm_hw_params(): Rev-B PCM Format Running
- [ 209.523773 / 04-28 13:07:42.522][3] es9218_pcm_hw_params(): exit, ret=0
- The dac plays sound around here
- [ 209.621501 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.621615 / 04-28 13:07:42.622][1] lge_dsp_sound_effect_allparam_put: value 1
- [ 209.621703 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.623117 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.623229 / 04-28 13:07:42.622][1] lge_dsp_sound_mabl_devicespeaker_put: value 0
- [ 209.623310 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.623443 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.623525 / 04-28 13:07:42.622][1] lge_dsp_sound_mabl_monoenable_put: value 0
- [ 209.623594 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
- [ 209.623716 / 04-28 13:07:42.622][1] +++++++++++++++++++++++++++++++++++++
Advertisement
Add Comment
Please, Sign In to add comment