API tools faq
paste
ftab

Porter AGL 2017-06-19 failed first boot

ftab
Jun 19th, 2017
381
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.14 KB | None | 0 0
raw download clone embed print report
  1. PORTER(M2W) SPI_LOADER(DDR3L) V0.20 2015.07.14
  2. DEVICE S25FL512
  3.  
  4.  
  5. U-Boot 2013.01.01-g74b16ba-dirty (Jun 05 2015 - 10:03:26)
  6.  
  7. CPU: Renesas Electronics R8A7791 rev 3.0
  8. Board: Porter Board
  9.  
  10. DRAM: 1 GiB
  11. MMC: sh-sdhi: 0, sh-sdhi: 1
  12. SF: Detected S25FL512S with page size 256 KiB, total 64 MiB
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Net: sh_eth
  17. Hit any key to stop autoboot: 0
  18. 3839406 bytes read in 179 ms (20.5 MiB/s)
  19. ## Booting kernel from Legacy Image at 40007fc0 ...
  20. Image Name: 'Linux-3.10.31-ltsi'
  21. Image Type: ARM Linux Kernel Image (uncompressed)
  22. Data Size: 3839342 Bytes = 3.7 MiB
  23. Load Address: 40008000
  24. Entry Point: 40008000
  25. Verifying Checksum ... OK
  26. XIP Kernel Image ... OK
  27. OK
  28.  
  29. Starting kernel ...
  30.  
  31. Booting Linux on physical CPU 0x0
  32. Initializing cgroup subsys cpuset
  33. Initializing cgroup subsys cpu
  34. Initializing cgroup subsys cpuacct
  35. Linux version 3.10.31-ltsi (build@build) (gcc version 6.2.0 (GCC) ) #3 SMP PREEMPT Mon Jun 12 12:26:43 EDT 2017
  36. CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c73c7d
  37. CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  38. Machine: porter, model: Porter
  39. debug: ignoring loglevel setting.
  40. cma: CMA: reserved 256 MiB at 70000000
  41. cma: CMA: reserved 256 MiB at 57000000
  42. Memory policy: ECC disabled, Data cache writealloc
  43. On node 0 totalpages: 524288
  44. free_area_init_node: node 0, pgdat c078c880, node_mem_map c0b38000
  45. Normal zone: 1248 pages used for memmap
  46. Normal zone: 0 pages reserved
  47. Normal zone: 159744 pages, LIFO batch:31
  48. HighMem zone: 15136 pages used for memmap
  49. HighMem zone: 364544 pages, LIFO batch:31
  50. PERCPU: Embedded 7 pages/cpu @c4b55000 s7808 r8192 d12672 u32768
  51. pcpu-alloc: s7808 r8192 d12672 u32768 alloc=8*4096
  52. pcpu-alloc: [0] 0 [0] 1
  53. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523040
  54. Kernel command line: console=ttySC6,38400 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk0p1 rootdelay=3 rw rootfstype=ext3 rootwait
  55. PID hash table entries: 4096 (order: 2, 16384 bytes)
  56. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  57. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  58. Memory: 1024MB 1024MB = 2048MB total
  59. Memory: 1547000k/1547000k available, 550152k reserved, 1196032K highmem
  60. Virtual kernel memory layout:
  61. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  63. vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  64. lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  65. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  66. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  67. .text : 0xc0008000 - 0xc070b074 (7181 kB)
  68. .init : 0xc070c000 - 0xc0749e80 ( 248 kB)
  69. .data : 0xc074a000 - 0xc078e160 ( 273 kB)
  70. .bss : 0xc078e160 - 0xc07c53dc ( 221 kB)
  71. Preemptible hierarchical RCU implementation.
  72. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  73. NR_IRQS:16 nr_irqs:16 16
  74. Architected local timer running at 10.00MHz (virt).
  75. Switching to timer-based delay loop
  76. sched_clock: ARM arch timer >56 bits at 10000kHz, resolution 100ns
  77. sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  78. Console: colour dummy device 80x30
  79. Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000)
  80. pid_max: default: 32768 minimum: 301
  81. Security Framework initialized
  82. Smack: Initializing.
  83. Mount-cache hash table entries: 512
  84. Initializing cgroup subsys devices
  85. Initializing cgroup subsys freezer
  86. CPU: Testing write buffer coherency: ok
  87. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  88. Setting up static identity map for 0xc05388b8 - 0xc0538910
  89. CPU1: Booted secondary processor
  90. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  91. Brought up 2 CPUs
  92. SMP: Total of 2 processors activated (40.00 BogoMIPS).
  93. CPU: All CPU(s) started in SVC mode.
  94. devtmpfs: initialized
  95. pinctrl core: initialized pinctrl subsystem
  96. regulator-dummy: no parameters
  97. NET: Registered protocol family 16
  98. DMA: preallocated 256 KiB pool for atomic coherent allocations
  99. renesas_irqc e61c0000.interrupt-controller: driving 10 irqs
  100. sh-pfc e6060000.pfc: r8a77910_pfc support registered
  101. No ATAGs?
  102. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  103. hw-breakpoint: maximum watchpoint size is 8 bytes.
  104. bio: create slab <bio-0> at 0
  105. gpio_rcar e6050000.gpio: driving 32 GPIOs
  106. gpio_rcar e6051000.gpio: driving 32 GPIOs
  107. gpio_rcar e6052000.gpio: driving 32 GPIOs
  108. gpio_rcar e6053000.gpio: driving 32 GPIOs
  109. gpio_rcar e6054000.gpio: driving 32 GPIOs
  110. gpio_rcar e6055000.gpio: driving 32 GPIOs
  111. gpio_rcar e6055400.gpio: driving 32 GPIOs
  112. gpio_rcar e6055800.gpio: driving 26 GPIOs
  113. SDHI0 Vcc: 3300 mV
  114. SDHI2 Vcc: 3300 mV
  115. SDHI0 VccQ: 1800 <--> 3300 mV at 3300 mV
  116. SDHI2 VccQ: 1800 <--> 3300 mV at 3300 mV
  117. SCSI subsystem initialized
  118. libata version 3.00 loaded.
  119. usbcore: registered new interface driver usbfs
  120. usbcore: registered new interface driver hub
  121. usbcore: registered new device driver usb
  122. i2c-sh_mobile e60b0000.i2c: I2C adapter 6 with bus speed 100000 Hz (L/H=0x1b/0x13)
  123. i2c-rcar e6518000.i2c: probed
  124. i2c-rcar e6530000.i2c: probed
  125. i2c-rcar e6520000.i2c: probed
  126. i2c-rcar e6528000.i2c: probed
  127. media: Linux media interface: v0.10
  128. Linux video capture interface: v2.00
  129. sh_cmt sh_cmt.0: used for clock events
  130. Advanced Linux Sound Architecture Driver Initialized.
  131. NetLabel: Initializing
  132. NetLabel: domain hash size = 128
  133. NetLabel: protocols = UNLABELED CIPSOv4
  134. NetLabel: unlabeled traffic allowed by default
  135. Switching to clocksource arch_sys_counter
  136. NET: Registered protocol family 2
  137. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  138. TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  139. TCP: Hash tables configured (established 8192 bind 8192)
  140. TCP: reno registered
  141. UDP hash table entries: 512 (order: 2, 16384 bytes)
  142. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  143. NET: Registered protocol family 1
  144. RPC: Registered named UNIX socket transport module.
  145. RPC: Registered udp transport module.
  146. RPC: Registered tcp transport module.
  147. RPC: Registered tcp NFSv4.1 backchannel transport module.
  148. PCI: CLS 0 bytes, default 64
  149. audit: initializing netlink socket (disabled)
  150. type=2000 audit(0.090:1): initialized
  151. bounce pool size: 64 pages
  152. VFS: Disk quotas dquot_6.5.2
  153. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  154. NFS: Registering the id_resolver key type
  155. Key type id_resolver registered
  156. Key type id_legacy registered
  157. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  158. msgmni has been set to 1197
  159. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  160. io scheduler noop registered
  161. io scheduler deadline registered
  162. io scheduler cfq registered (default)
  163. unable to find transceiver
  164. platform pci-rcar-gen2.1: Driver pci-rcar-gen2 requests probe deferral
  165. rcar-pcie fe000000.pcie: PCIe link down
  166. DA9210: 1000 mV at 4600 mA
  167. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  168. SuperH (H)SCI(F) driver initialized
  169. sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184) is a scif
  170. console [ttySC6] enabled
  171. brd: module loaded
  172. loop: module loaded
  173. nbd: registered device at major 43
  174. at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
  175. scsi0 : sata_rcar
  176. ata1: SATA max UDMA/133 irq 137
  177. m25p80 spi0.0: s25fl512s (65536 Kbytes)
  178. 3 ofpart partitions found on MTD device spi0.0
  179. Creating 3 MTD partitions on "spi0.0":
  180. 0x000000000000-0x000000040000 : "loader"
  181. 0x000000040000-0x000000440000 : "user"
  182. 0x000000440000-0x000004000000 : "flash"
  183. renesas_spi e6b10000.spi: probed
  184. tun: Universal TUN/TAP device driver, 1.6
  185. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  186. vcan: Virtual CAN interface driver
  187. CAN device driver interface
  188. rcar_can e6e80000.can: device registered (reg_base=e78f6000, irq=218)
  189. libphy: sh_mii: probed
  190. sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:88:b4, IRQ 194.
  191. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  192. ehci-pci: EHCI PCI platform driver
  193. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  194. usbcore: registered new interface driver usb-storage
  195. usbcore: registered new interface driver usbserial
  196. usbcore: registered new interface driver usbserial_generic
  197. usbserial: USB Serial support registered for generic
  198. usbcore: registered new interface driver cp210x
  199. usbserial: USB Serial support registered for cp210x
  200. renesas_usbhs renesas_usbhs: transceiver found
  201. renesas_usbhs renesas_usbhs: gadget probed
  202. renesas_usbhs renesas_usbhs: probed
  203. mousedev: PS/2 mouse device common for all mice
  204. i2c /dev entries driver
  205. i2c-core: driver [adv7612] using legacy suspend method
  206. i2c-core: driver [adv7612] using legacy resume method
  207. i2c-core: driver [adv7180] using legacy suspend method
  208. i2c-core: driver [adv7180] using legacy resume method
  209. soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
  210. adv7180 2-0020: chip found @ 0x40 (e6530000.i2c)
  211. [drm] Initialized drm 1.1.0 20060810
  212. ata1: link resume succeeded after 1 retries
  213. rcar-du rcar-du-r8a7791: DU0 use VSPD0
  214. rcar-du rcar-du-r8a7791: DU1 use VSPD1
  215. rcar-du rcar-du-r8a7791: fb0: frame buffer device
  216. rcar-du rcar-du-r8a7791: registered panic notifier
  217. ata1: SATA link down (SStatus 0 SControl 300)
  218. rcar-du rcar-du-r8a7791: CRTC[1] used by FBDev
  219. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  220. [drm] No driver support for vblank timestamp query.
  221. [drm] Initialized rcar-du 1.0.0 20130110 on minor 0
  222. device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  223. sh_mobile_sdhi sdhi0: Got CD GPIO #806.
  224. sh_mobile_sdhi sdhi0: Got WP GPIO #807.
  225. sh_mobile_sdhi sdhi0: mmc0 base at 0xee100000 clock rate 195 MHz
  226. sh_mobile_sdhi sdhi2: Got CD GPIO #822.
  227. sh_mobile_sdhi sdhi2: timeout waiting for SD bus idle
  228. sh_mobile_sdhi sdhi2: mmc1 base at 0xee160000 clock rate 97 MHz
  229. usbcore: registered new interface driver usbhid
  230. usbhid: USB HID core driver
  231. usbcore: registered new interface driver snd-usb-audio
  232. platform sound.6: Driver asoc-simple-card requests probe deferral
  233. rcar_sound ec500000.rcar_sound: probed
  234. TCP: cubic registered
  235. NET: Registered protocol family 10
  236. sit: IPv6 over IPv4 tunneling driver
  237. NET: Registered protocol family 17
  238. Bridge firewalling registered
  239. can: controller area network core (rev 20120528 abi 9)
  240. NET: Registered protocol family 29
  241. can: raw protocol (rev 20120528)
  242. can: broadcast manager protocol (rev 20120528 t)
  243. can: netlink gateway (rev 20130117) max_hops=1
  244. Key type dns_resolver registered
  245. VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  246. pci-rcar-gen2 pci-rcar-gen2.1: PCI: bus0 revision 11
  247. pci-rcar-gen2 pci-rcar-gen2.1: PCI host bridge to bus 0002:01
  248. pci_bus 0002:01: root bus resource [io 0xee0c0000-0xee0cffff]
  249. pci_bus 0002:01: root bus resource [mem 0xee0c0000-0xee0cffff]
  250. mmc1: SD Status: Invalid Allocation Unit size.
  251. pci_bus 0002:01: No busn resource found for root bus, will use [bus 01-ff]
  252. pci 0002:01:00.0: [1033:0000] type 00 class 0x060000
  253. pci 0002:01:00.0: reg 10: [mem 0xee0d0800-0xee0d0bff]
  254. pci 0002:01:00.0: reg 14: [mem 0x40000000-0x7fffffff pref]
  255. mmc1: new ultra high speed SDR50 SDXC card at address 0001
  256. mmcblk0: mmc1:0001 00000 59.6 GiB
  257. mmcblk0: p1
  258. pci 0002:01:01.0: [1033:0035] type 00 class 0x0c0310
  259. pci 0002:01:01.0: reg 10: [mem 0x00000000-0x00000fff]
  260. pci 0002:01:01.0: supports D1 D2
  261. pci 0002:01:01.0: PME# supported from D0 D1 D2 D3hot
  262. pci 0002:01:02.0: [1033:00e0] type 00 class 0x0c0320
  263. pci 0002:01:02.0: reg 10: [mem 0x00000000-0x000000ff]
  264. pci 0002:01:02.0: supports D1 D2
  265. pci 0002:01:02.0: PME# supported from D0 D1 D2 D3hot
  266. PCI: bus1: Fast back to back transfers disabled
  267. pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  268. PCI: Device 0002:01:01.0 not available because of resource collisions
  269. pci 0002:01:01.0: Can't enable PCI device, BIOS handoff failed.
  270. PCI: Device 0002:01:01.0 not available because of resource collisions
  271. pci 0002:01:01.0: Driver ohci_hcd requests probe deferral
  272. PCI: Device 0002:01:02.0 not available because of resource collisions
  273. pci 0002:01:02.0: Can't enable PCI device, BIOS handoff failed.
  274. PCI: Device 0002:01:02.0 not available because of resource collisions
  275. pci 0002:01:02.0: Driver ehci-pci requests probe deferral
  276. pci 0002:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff]
  277. pci 0002:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff]
  278. asoc-simple-card sound.6: ak4642-hifi <-> ec500000.rcar_sound mapping ok
  279. PCI: enabling device 0002:01:01.0 (0140 -> 0142)
  280. ohci_hcd 0002:01:01.0: OHCI Host Controller
  281. ohci_hcd 0002:01:01.0: new USB bus registered, assigned bus number 1
  282. ohci_hcd 0002:01:01.0: irq 145, io mem 0xee0c0000
  283. hub 1-0:1.0: USB hub found
  284. hub 1-0:1.0: 1 port detected
  285. PCI: enabling device 0002:01:02.0 (0140 -> 0142)
  286. ehci-pci 0002:01:02.0: EHCI Host Controller
  287. ehci-pci 0002:01:02.0: new USB bus registered, assigned bus number 2
  288. ehci-pci 0002:01:02.0: irq 145, io mem 0xee0c1000
  289. ehci-pci 0002:01:02.0: USB 2.0 started, EHCI 1.00
  290. hub 2-0:1.0: USB hub found
  291. hub 2-0:1.0: 1 port detected
  292. /home/build/agl/build-porter/tmp/work-shared/porter/kernel-source/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  293. ALSA device list:
  294. #0: rsnd-dai.0-ak4642-hifi
  295. Waiting 3sec before mounting root device...
  296. usb 2-1: new high-speed USB device number 2 using ehci-pci
  297. hub 2-1:1.0: USB hub found
  298. hub 2-1:1.0: 4 ports detected
  299. usb 2-1.1: new high-speed USB device number 3 using ehci-pci
  300. usb 2-1.2: new full-speed USB device number 4 using ehci-pci
  301. input: ILITEK ILITEK Multi-Touch as /devices/platform/pci-rcar-gen2.1/pci0002:01/0002:01:02.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input0
  302. hid-multitouch 0003:222A:001C.0001: input: USB HID v1.10 Device [ILITEK ILITEK Multi-Touch] on usb-0002:01:02.0-1.2/input0
  303. usb 2-1.3: new full-speed USB device number 5 using ehci-pci
  304. usb 2-1.4: new full-speed USB device number 6 using ehci-pci
  305. input: C-Media USB Headphone Set as /devices/platform/pci-rcar-gen2.1/pci0002:01/0002:01:02.0/usb2/2-1/2-1.4/2-1.4:1.3/input/input1
  306. hid-generic 0003:0D8C:000C.0002: input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0002:01:02.0-1.4/input3
  307. kjournald starting. Commit interval 5 seconds
  308. EXT3-fs (mmcblk0p1): using internal journal
  309. EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode
  310. VFS: Mounted root (ext3 filesystem) on device 179:1.
  311. devtmpfs: mounted
  312. Freeing unused kernel memory: 244K (c070c000 - c0749000)
  313. systemd[1]: Successfully loaded Smack policies.
  314. systemd[1]: System time before build time, advancing clock.
  315. systemd[1]: Relabelled /dev and /run in 5.944ms.
  316. systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  317. systemd[1]: Detected architecture arm.
  318.  
  319. Welcome to Automotive Grade Linux 3.99.1+snapshot-20170531 (dab)!
  320.  
  321. systemd[1]: Set hostname to <porter>.
  322. systemd[1]: Initializing machine ID from random generator.
  323. systemd[1]: Configuration file /lib/systemd/system/ostree-remount.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  324. systemd[1]: Reached target Remote File Systems.
  325. [ OK ] Reached target Remote File Systems.
  326. systemd[1]: Created slice System Slice.
  327. [ OK ] Created slice System Slice.
  328. systemd[1]: Created slice system-agl\x2duser\x2dsession.slice.
  329. [ OK ] Created slice system-agl\x2duser\x2dsession.slice.
  330. systemd[1]: Listening on Journal Socket.
  331. [ OK ] Listening on Journal Socket.
  332. systemd[1]: Starting Create list of required static device nodes for the current kernel...
  333. Starting Create list of required st... nodes for the current kernel...
  334. systemd[1]: Mounting POSIX Message Queue File System...
  335. Mounting POSIX Message Queue File System...
  336. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  337. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  338. systemd[1]: Reached target Swap.
  339. [ OK ] Reached target Swap.
  340. systemd[1]: Mounting Temporary Directory...
  341. Mounting Temporary Directory...
  342. systemd[1]: Created slice system-getty.slice.
  343. [ OK ] Created slice system-getty.slice.
  344. systemd[1]: Listening on Journal Socket (/dev/log).
  345. [ OK ] Listening on Journal Socket (/dev/log).
  346. systemd[1]: Starting Setup Virtual Console...
  347. Starting Setup Virtual Console...
  348. systemd[1]: Listening on udev Kernel Socket.
  349. [ OK ] Listening on udev Kernel Socket.
  350. systemd[1]: Listening on Syslog Socket.
  351. [ OK ] Listening on Syslog Socket.
  352. systemd[1]: Starting Journal Service...
  353. Starting Journal Service...
  354. systemd[1]: Created slice User and Session Slice.
  355. [ OK ] Created slice User and Session Slice.
  356. systemd[1]: Reached target Slices.
  357. [ OK ] Reached target Slices.
  358. systemd[1]: Listening on udev Control Socket.
  359. [ OK ] Listening on udev Control Socket.
  360. systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  361. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  362. systemd[1]: Created slice system-serial\x2dgetty.slice.
  363. [ OK ] Created slice system-serial\x2dgetty.slice.
  364. systemd[1]: Starting Load Kernel Modules...
  365. Starting Load Kernel Modules...
  366. mostcore: init()
  367. aim_cdev: init()
  368. mostcore: registered new application interfacing module cdev
  369. systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  370. [ OK ] Staraim_network: most_net_init()
  371. ted Dispatch Pasmostcore: registered new application interfacing module networking
  372. sword Requests to Consolaim_sound: init()
  373. e Directory Watcmostcore: registered new application interfacing module sound
  374. h.
  375. mostcore: registered new application interfacing module v4l
  376. systemd[1]: Reached target Paths.
  377. MNGR: CO from 0x78000000 to 0x7fffffff
  378. 0m] Reached targMMNGR: CO from 0x75000000 to 0x777fffff
  379. et Paths.
  380. MMNGR: MXSAAR0(0x00780080)
  381. MMNGR: IMPMBA(78000100), IMPMBD(38040180)
  382. systemd[1]: Starting Remount Root and Kernel File Systems...
  383. Starting Remount Root and Kernel File Systems...
  384. systemd[1]: Mounted POSIX Message Queue File System.
  385. [ OK ] Mounted POSIX Message Queue File System.
  386. systemd[1]: Mounted Temporary Directory.
  387. [ OK ] Mounted Temporary Directory.
  388. systemd[1]: Started Journal Service.
  389. [ OK ] Started Journal Service.
  390. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  391. [ OK ] Started Setup Virtual Console.
  392. MMD reserve area from 0xe7aa8000 to 0xf7aa7fff at virtual
  393. MMD reserve area from 0x70000000 to 0x7fffffff at physical
  394. [ OK ] StarS3D: XYMODECONF(0x00000010)
  395. ted Remount Root and Kernel File Systemsvspm (Jun 12 2017 12:28:38) driver installed.
  396.  
  397. fdpm (Jun 12 2017 12:28:41) driver for M2 installed
  398. Starting Rebuild Hardware Database...
  399. hdm_usb: hdm_usb_init()
  400. usbcore: registered new interface driver hdm_usb
  401. usbcore: registered new interface driver k2l-mocca
  402. Starting Flush Journal to Persistent Storage...
  403. Starting Create System Users...
  404. [FAILED] Failed to start Load Kernel Modules.
  405. See 'systemctl status systemd-modules-load.service' for details.
  406. [ OK ] Started Create System Users.
  407. systemd-journald[147]: Received request to flush runtime journal from PID 1
  408. Starting Create Static Device Nodes in /dev...
  409. Mounting Configuration File System...
  410. Starting Apply Kernel Variables...
  411. [ OK ] Mounted Configuration File System.
  412. [ OK ] Started Flush Journal to Persistent Storage.
  413. [ OK ] Started Create Static Device Nodes in /dev.
  414. [ OK ] Started Apply Kernel Variables.
  415. [ OK ] Reached target Local File Systems (Pre).
  416. Mounting /var/volatile...
  417. Starting udev Kernel Device Manager...
  418. [ OK ] Mounted /var/volatile.
  419. Starting Load/Save Random Seed...
  420. [ OK ] Reached target Local File Systems.
  421. Starting Rebuild Journal Catalog...
  422. Starting Create Volatile Files and Directories...
  423. Starting Rebuild Dynamic Linker Cache...
  424. [ OK ] Started udev Kernel Device Manager.
  425. [ OK ] Started Load/Save Random Seed.
  426. [ OK ] Started Rebuild Journal Catalog.
  427. [ OK ] Started Create Volatile Files and Directories.
  428. Starting Update UTMP about System Boot/Shutdown...
  429. Starting Network Time Synchronization...
  430. Starting Run pending postinsts...
  431. type=1400 audit(1494521229.820:2): lsm=SMACK fn=smack_inode_permission action=denied subject="System" object="_" requested=wx pid=231 comm="systemd-timesyn" name="systemd" dev="mmcblk0p1" ino=2039844
  432. [ OK ] Started Update UTMP about System Boot/Shutdown.
  433. [ OK ] Started Network Time Synchronization.
  434. [ OK ] Reached target System Time Synchronized.
  435. [ OK ] Started Rebuild Hardware Database.
  436. Starting udev Coldplug all Devices...
  437. [ OK ] Started udev Coldplug all Devices.
  438. Starting Start Psplash Boot Screen...
  439. [ OK ] Started Start Psplash Boot Screen.
  440. Starting Load Kernel Modules...
  441. [FAILED] Failed to start Load Kernel Modules.
  442. See 'systemctl status systemd-modules-load.service' for details.
  443. [ OK ] Started Rebuild Dynamic Linker Cache.
  444. Starting Update is Completed...
  445. [ OK ] Started Update is Completed.
  446. [ OK ] Started Run pending postinsts.
  447. [ OK ] Reached target System Initialization.
  448. [ OK ] Listening on cynara-admin.socket.
  449. [ OK ] Listening on cynara-agent.socket.
  450. [ OK ] Listening on D-Bus System Message Bus Socket.
  451. Starting sshd.socket.
  452. [ OK ] Listening on cynara.socket.
  453. [ OK ] Reached target cynara sockets.
  454. [ OK ] Listening on security-manager.socket.
  455. [ OK ] Started Daily Cleanup of Temporary Directories.
  456. [ OK ] Reached target Timers.
  457. [ OK ] Listening on sshd.socket.
  458. [ OK ] Reached target Sockets.
  459. [ OK ] Reached target Basic System.
  460. Starting Application Framework Master, system side...
  461. [ OK ] Started GENIVI DLT logging daemon.
  462. [ OK ] Started System Logging Service.
  463. [ OK ] Started GENIVI DLT system. Applicat...em information, logs and files..
  464. [ OK ] Started Kernel Logging Service.
  465. Starting Disk Manager (legacy version)...
  466. Starting rc.pvr.service...
  467. Starting Terminate Psplash Boot Screen...
  468. Starting Cynara service...
  469. Starting Install Security ManagePVR_K: SGX use system memory.
  470. r database...
  471. pvrsrvkm: Power-on latency exceeded, new value 65700 ns
  472. pvrsrvkm pvrsrvkm: start latency exceeded, new value 8400 ns
  473. pvrsrvkm pvrsrvkm: state restore latency exceeded, new value 1800 ns
  474. Starting Save/Restore Sound Card State...
  475. [ OK ] Started D-Bus System Message Bus.
  476. PVR_K: UM DDK-(3497023) and KM DDK-(3497023) match. [ OK ]
  477. [ OK ] Started Application Framework Master, system side.
  478. Starting Connection service...
  479. Starting GENIVI AudioManager...
  480. dc_linuxfb - Found usable fbdev device ():
  481. range (physical) = 0x57100000-0x588bb000
  482. size (bytes) = 0x17bb000
  483. xres x yres = 1920x1080
  484. xres x yres (v) = 1920x3240
  485. img pix fmt = 20
  486. num buffers = 3
  487. Starting Login Service...
  488. Starting Telephony service...
  489. [ OK ] Started Cynara service.
  490. [ OK ] Started Terminate Psplash Boot Screen.
  491. [ OK ] Started Install Security Manager database.
  492. [ OK ] Started rc.pvr.service.
  493. [ OK ] Started Save/Restore Sound Card State.
  494. sh-eth ee700000.ethernet eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
  495. [ OK ] Started Disk Manager (legacy version).
  496. [ OK ] Started Connection service.
  497. Starting Hostname Service...
  498. Starting WPA supplicant...
  499. Starting Authorization Manager...
  500. [ OK ] Started Weston Wayland Compositor.
  501. Starting Start the security manager...
  502. Starting Run pending agl postinsts...
  503. [ OK ] Started Start the security manager.
  504. [ OK ] StarBluetooth: Core ver 2.16
  505. ted Login Service.
  506. NET: Registered protocol family 31
  507. Bluetooth: HCI device and connection manager initialized
  508. [ OK luetooth: HCI socket layer initialized
  509. 0m] Started GENIBluetooth: L2CAP socket layer initialized
  510. VI AudioManager.Bluetooth: SCO socket layer initialized
  511.  
  512. [ OK ] Started Telephony service.
  513. [ OK ] Started WPA supplicant.
  514. [ OK ] Started Hostname Service.
  515. [ OK ] Reached target Network.
  516. Starting Target Communication Framework agent...
  517. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  518. [ OK ] Started Target Communication Framework agent.
  519. [ OK ] Started Authorization Manager.
  520. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  521. libphy: ee700000.etherne:01 - Link is Up - 100/Full
  522. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  523. [ OK ] Started Run pending agl postinsts.
  524. Starting Permit User Sessions...
  525. [ OK ] Started Permit User Sessions.
  526. [ OK ] Started User Manager for UID root.
  527. [ OK ] Created slice User Slice of root.
  528. Starting User Manager for UID 0...
  529. [ OK ] Started Session c1 of user root.
  530. input: uinput-sample as /devices/virtual/input/input2
  531. Starting Bluetooth service...
  532. [ OK ] Started Bluetooth service.
  533. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  534. Bluetooth: BNEP filters: protocol multicast
  535. Bluetooth: BNEP socket layer initialized
  536. [ OK ] Started User Manager for UID 0.
  537. [ TIME ] Timed out waiting for device dev-ttySC6.device.
  538. [DEPEND] Dependency failed for Serial Getty on ttySC6.
  539. [ OK ] Reached target Login Prompts.
  540. [ OK ] Reached target Multi-User System.
  541. Starting Update UTMP about System Runlevel Changes...
  542. [ OK ] Started Update UTMP about System Runlevel Changes.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!