Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M]
- Capabilities: [e4] Vendor Specific Information: Len=06 <?>
- Kernel driver in use: agpgart-intel
- 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
- Region 1: Memory at fe780000 (32-bit, non-prefetchable) [size=512K]
- Region 2: I/O ports at ec00 [size=8]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [d0] Power Management version 1
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
- Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
- 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at dc00 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at e000 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at e400 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at e800 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 23
- Region 0: Memory at fe77bc00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Kernel driver in use: ehci_hcd
- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
- I/O behind bridge: 0000b000-0000bfff
- Memory behind bridge: fe500000-fe5fffff
- Prefetchable memory behind bridge: fff00000-000fffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at fc00 [size=16]
- Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
- Kernel driver in use: ata_piix
- 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 17
- Region 4: I/O ports at 0400 [size=32]
- 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 5
- Region 0: I/O ports at d800 [size=256]
- Region 1: I/O ports at d400 [size=64]
- Region 2: Memory at fe77b800 (32-bit, non-prefetchable) [size=512]
- Region 3: Memory at fe77b400 (32-bit, non-prefetchable) [size=256]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
- Subsystem: GVC/BCM Advanced Research Device 2181
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 9
- Region 0: Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K]
- Region 1: I/O ports at bc00 [size=64]
- Capabilities: [dc] Power Management version 2
- Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
- Kernel driver in use: e100
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement