API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 2nd, 2017
169
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.19 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2017.09-00221-g0d6ab32 (Oct 02 2017 - 17:10:44)
  2. Trying to boot from MMC1
  3.  
  4.  
  5. U-Boot 2017.09-00221-g0d6ab32 (Oct 02 2017 - 17:10:44 -0300)
  6.  
  7. CPU: Freescale i.MX6Q rev1.5 at 792 MHz
  8. Reset cause: WDOG
  9. Board: Wandboard rev B1
  10. I2C: ready
  11. DRAM: 2 GiB
  12. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  13. No panel detected: default to HDMI
  14. Display: HDMI (1024x768)
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Net: FEC [PRIME]
  19. Hit any key to stop autoboot: 0
  20. switch to partitions #0, OK
  21. mmc0 is current device
  22. Scanning mmc 0:1...
  23. Found U-Boot script /boot/boot.scr
  24. 336 bytes read in 69 ms (3.9 KiB/s)
  25. ## Executing script at 12000000
  26. 35762 bytes read in 56 ms (623 KiB/s)
  27. 6378872 bytes read in 367 ms (16.6 MiB/s)
  28. ## Flattened Device Tree blob at 18000000
  29. Booting using the fdt blob at 0x18000000
  30. Using Device Tree in place at 18000000, end 1800bbb1
  31.  
  32. Starting kernel ...
  33.  
  34. [ 0.000000] Booting Linux on physical CPU 0x0
  35. [ 0.000000] Linux version 4.13.3 (fabio@r49496) (gcc version 6.4.0 (Buildroot 2017.11-git-00499-g1f6bc62-dirty)) #1 SMP Wed Sep 27 11:36:29 BRT 2017
  36. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  37. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  38. [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 Quad Board rev B1
  39. [ 0.000000] Memory policy: Data cache writealloc
  40. [ 0.000000] cma: Reserved 64 MiB at 0x8c000000
  41. [ 0.000000] percpu: Embedded 16 pages/cpu @eef97000 s36392 r8192 d20952 u65536
  42. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
  43. [ 0.000000] Kernel command line: console=ttymxc0,115200 root=PARTUUID=00000000-01 rootwait rootfstype=ext4
  44. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  45. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  46. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  47. [ 0.000000] Memory: 1991956K/2097152K available (9216K kernel code, 483K rwdata, 2980K rodata, 1024K init, 8227K bss, 39660K reserved, 65536K cma-reserved, 1245184K highmem)
  48. [ 0.000000] Virtual kernel memory layout:
  49. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  50. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  51. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  52. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  53. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  54. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  55. [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB)
  56. [ 0.000000] .init : 0xc0d00000 - 0xc0e00000 (1024 kB)
  57. [ 0.000000] .data : 0xc0e00000 - 0xc0e78ca0 ( 484 kB)
  58. [ 0.000000] .bss : 0xc0e7a000 - 0xc1682fcc (8228 kB)
  59. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  60. [ 0.000000] Running RCU self tests
  61. [ 0.000000] Hierarchical RCU implementation.
  62. [ 0.000000] RCU event tracing is enabled.
  63. [ 0.000000] RCU lockdep checking is enabled.
  64. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  65. [ 0.000000] L2C-310 errata 752271 769419 enabled
  66. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  67. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  68. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  69. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  70. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  71. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  72. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  73. [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  74. [ 0.000033] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  75. [ 0.001411] Console: colour dummy device 80x30
  76. [ 0.001435] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  77. [ 0.001450] ... MAX_LOCKDEP_SUBCLASSES: 8
  78. [ 0.001463] ... MAX_LOCK_DEPTH: 48
  79. [ 0.001477] ... MAX_LOCKDEP_KEYS: 8191
  80. [ 0.001490] ... CLASSHASH_SIZE: 4096
  81. [ 0.001504] ... MAX_LOCKDEP_ENTRIES: 32768
  82. [ 0.001517] ... MAX_LOCKDEP_CHAINS: 65536
  83. [ 0.001531] ... CHAINHASH_SIZE: 32768
  84. [ 0.001544] memory used by lock dependency info: 5167 kB
  85. [ 0.001558] per task-struct memory footprint: 1536 bytes
  86. [ 0.001601] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  87. [ 0.001630] pid_max: default: 32768 minimum: 301
  88. [ 0.001905] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  89. [ 0.001929] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  90. [ 0.003379] CPU: Testing write buffer coherency: ok
  91. [ 0.004197] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  92. [ 0.005174] Setting up static identity map for 0x10100000 - 0x10100078
  93. [ 0.005538] Hierarchical SRCU implementation.
  94. [ 0.006925] smp: Bringing up secondary CPUs ...
  95. [ 0.008461] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  96. [ 0.010390] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  97. [ 0.011791] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  98. [ 0.011991] smp: Brought up 1 node, 4 CPUs
  99. [ 0.012028] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  100. [ 0.012044] CPU: All CPU(s) started in SVC mode.
  101. [ 0.014167] devtmpfs: initialized
  102. [ 0.031148] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  103. [ 0.033090] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  104. [ 0.033129] futex hash table entries: 1024 (order: 4, 65536 bytes)
  105. [ 0.036631] pinctrl core: initialized pinctrl subsystem
  106. [ 0.038935] random: get_random_u32 called from bucket_table_alloc+0xe8/0x278 with crng_init=0
  107. [ 0.039504] NET: Registered protocol family 16
  108. [ 0.042859] DMA: preallocated 256 KiB pool for atomic coherent allocations
  109. [ 0.045237] cpuidle: using governor menu
  110. [ 0.045459] CPU identified as i.MX6Q, silicon rev 1.5
  111. [ 0.058227] vdd1p1: supplied by regulator-dummy
  112. [ 0.059298] vdd3p0: supplied by regulator-dummy
  113. [ 0.060379] vdd2p5: supplied by regulator-dummy
  114. [ 0.061307] vddarm: supplied by regulator-dummy
  115. [ 0.062245] vddpu: supplied by regulator-dummy
  116. [ 0.063298] vddsoc: supplied by regulator-dummy
  117. [ 0.080946] No ATAGs?
  118. [ 0.081301] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  119. [ 0.081338] hw-breakpoint: maximum watchpoint size is 4 bytes.
  120. [ 0.083636] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  121. [ 0.134044] mxs-dma 110000.dma-apbh: initialized
  122. [ 0.137362] vgaarb: loaded
  123. [ 0.138071] SCSI subsystem initialized
  124. [ 0.138980] usbcore: registered new interface driver usbfs
  125. [ 0.139129] usbcore: registered new interface driver hub
  126. [ 0.139318] usbcore: registered new device driver usb
  127. [ 0.141329] i2c i2c-0: IMX I2C adapter registered
  128. [ 0.141366] i2c i2c-0: can't use DMA, using PIO instead.
  129. [ 0.142520] i2c i2c-1: IMX I2C adapter registered
  130. [ 0.142553] i2c i2c-1: can't use DMA, using PIO instead.
  131. [ 0.142772] Linux video capture interface: v2.00
  132. [ 0.142977] pps_core: LinuxPPS API ver. 1 registered
  133. [ 0.142995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  134. [ 0.143039] PTP clock support registered
  135. [ 0.143615] Advanced Linux Sound Architecture Driver Initialized.
  136. [ 0.145996] Bluetooth: Core ver 2.22
  137. [ 0.146080] NET: Registered protocol family 31
  138. [ 0.146098] Bluetooth: HCI device and connection manager initialized
  139. [ 0.146159] Bluetooth: HCI socket layer initialized
  140. [ 0.146187] Bluetooth: L2CAP socket layer initialized
  141. [ 0.146310] Bluetooth: SCO socket layer initialized
  142. [ 0.148575] clocksource: Switched to clocksource mxc_timer1
  143. [ 0.149112] VFS: Disk quotas dquot_6.6.0
  144. [ 0.149239] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  145. [ 0.171150] NET: Registered protocol family 2
  146. [ 0.172658] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  147. [ 0.172801] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  148. [ 0.175404] TCP: Hash tables configured (established 8192 bind 8192)
  149. [ 0.175757] UDP hash table entries: 512 (order: 3, 40960 bytes)
  150. [ 0.176144] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  151. [ 0.177125] NET: Registered protocol family 1
  152. [ 0.178339] RPC: Registered named UNIX socket transport module.
  153. [ 0.178369] RPC: Registered udp transport module.
  154. [ 0.178389] RPC: Registered tcp transport module.
  155. [ 0.178406] RPC: Registered tcp NFSv4.1 backchannel transport module.
  156. [ 0.180093] hw perfevents: no interrupt-affinity property for /soc/pmu, guessing.
  157. [ 0.180712] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  158. [ 0.184529] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  159. [ 0.197341] NFS: Registering the id_resolver key type
  160. [ 0.197556] Key type id_resolver registered
  161. [ 0.197584] Key type id_legacy registered
  162. [ 0.197701] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  163. [ 0.199002] fuse init (API version 7.26)
  164. [ 0.202158] random: fast init done
  165. [ 0.209015] bounce: pool size: 64 pages
  166. [ 0.209115] io scheduler noop registered
  167. [ 0.209136] io scheduler deadline registered
  168. [ 0.209427] io scheduler cfq registered (default)
  169. [ 0.209447] io scheduler mq-deadline registered
  170. [ 0.209464] io scheduler kyber registered
  171. [ 0.216103] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  172. [ 0.216188] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  173. [ 0.223215] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc
  174. [ 0.223898] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc
  175. [ 0.226108] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX
  176. [ 1.040540] console [ttymxc0] enabled
  177. [ 1.045890] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 65, base_baud = 5000000) is a IMX
  178. [ 1.065607] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops)
  179. [ 1.072041] etnaviv gpu-subsystem: bound 130000.gpu (ops gpu_ops)
  180. [ 1.078378] etnaviv gpu-subsystem: bound 2204000.gpu (ops gpu_ops)
  181. [ 1.084638] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
  182. [ 1.142491] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
  183. [ 1.202329] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
  184. [ 1.208503] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
  185. [ 1.216543] [drm] Initialized etnaviv 1.1.0 20151214 for gpu-subsystem on minor 0
  186. [ 1.226955] imx-ipuv3 2400000.ipu: IPUv3H probed
  187. [ 1.233488] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  188. [ 1.240177] [drm] No driver support for vblank timestamp query.
  189. [ 1.246691] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops)
  190. [ 1.254357] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops)
  191. [ 1.262033] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops)
  192. [ 1.269723] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops)
  193. [ 1.277697] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY)
  194. [ 1.288236] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops)
  195. [ 1.295957] [drm] Cannot find any crtc or sizes - going 1024x768
  196. [ 1.316827] Console: switching to colour frame buffer device 128x48
  197. [ 1.328510] imx-drm display-subsystem: fb0: frame buffer device
  198. [ 1.336085] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1
  199. [ 1.344046] imx-ipuv3 2800000.ipu: IPUv3H probed
  200. [ 1.367350] brd: module loaded
  201. [ 1.389378] loop: module loaded
  202. [ 1.393978] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
  203. [ 1.402005] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
  204. [ 1.410117] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
  205. [ 1.418318] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  206. [ 1.428719] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  207. [ 1.435733] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  208. [ 1.444624] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  209. [ 1.456617] scsi host0: ahci-imx
  210. [ 1.460803] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 68
  211. [ 1.474406] libphy: Fixed MDIO Bus: probed
  212. [ 1.479553] CAN device driver interface
  213. [ 1.485347] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator
  214. [ 1.497487] pps pps0: new PPS source ptp0
  215. [ 1.527060] libphy: fec_enet_mii_bus: probed
  216. [ 1.533088] fec 2188000.ethernet eth0: registered PHC device 0
  217. [ 1.540381] usbcore: registered new interface driver asix
  218. [ 1.545885] usbcore: registered new interface driver ax88179_178a
  219. [ 1.552183] usbcore: registered new interface driver cdc_ether
  220. [ 1.558124] usbcore: registered new interface driver net1080
  221. [ 1.564129] usbcore: registered new interface driver cdc_subset
  222. [ 1.570244] usbcore: registered new interface driver zaurus
  223. [ 1.575953] usbcore: registered new interface driver cdc_ncm
  224. [ 1.581688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  225. [ 1.588235] ehci-pci: EHCI PCI platform driver
  226. [ 1.592876] ehci-mxc: Freescale On-Chip EHCI Host driver
  227. [ 1.598986] usbcore: registered new interface driver usb-storage
  228. [ 1.615392] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator
  229. [ 1.627759] ci_hdrc ci_hdrc.1: EHCI Host Controller
  230. [ 1.632922] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  231. [ 1.668544] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  232. [ 1.676822] hub 1-0:1.0: USB hub found
  233. [ 1.680894] hub 1-0:1.0: 1 port detected
  234. [ 1.692212] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-rtc-lp as rtc0
  235. [ 1.701654] i2c /dev entries driver
  236. [ 1.706748] IR NEC protocol handler initialized
  237. [ 1.711354] IR RC5(x/sz) protocol handler initialized
  238. [ 1.716428] IR RC6 protocol handler initialized
  239. [ 1.721013] IR JVC protocol handler initialized
  240. [ 1.725563] IR Sony protocol handler initialized
  241. [ 1.730230] IR SANYO protocol handler initialized
  242. [ 1.734953] IR Sharp protocol handler initialized
  243. [ 1.739784] IR MCE Keyboard/mouse protocol handler initialized
  244. [ 1.745639] IR XMP protocol handler initialized
  245. [ 1.757731] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  246. [ 1.763909] Bluetooth: HCI UART driver ver 2.3
  247. [ 1.768381] Bluetooth: HCI UART protocol H4 registered
  248. [ 1.774448] sdhci: Secure Digital Host Controller Interface driver
  249. [ 1.780687] sdhci: Copyright(c) Pierre Ossman
  250. [ 1.785062] sdhci-pltfm: SDHCI platform and OF driver helper
  251. [ 1.793717] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
  252. [ 1.800631] ata1: SATA link down (SStatus 0 SControl 300)
  253. [ 1.800702] ahci-imx 2200000.sata: no device found, disabling link.
  254. [ 1.800712] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  255. [ 1.821923] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
  256. [ 1.890043] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  257. [ 1.897918] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
  258. [ 1.968713] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  259. [ 1.982107] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  260. [ 1.991487] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
  261. [ 2.058991] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  262. [ 2.077665] caam 2100000.caam: Entropy delay = 3200
  263. [ 2.143403] caam 2100000.caam: Instantiated RNG4 SH0
  264. [ 2.204165] caam 2100000.caam: Instantiated RNG4 SH1
  265. [ 2.209311] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
  266. [ 2.215777] caam 2100000.caam: job rings = 2, qi = 0
  267. [ 2.232975] caam algorithms registered in /proc/crypto
  268. [ 2.243323] caam_jr 2101000.jr0: registering rng-caam
  269. [ 2.249672] usbcore: registered new interface driver usbhid
  270. [ 2.255267] usbhid: USB HID core driver
  271. [ 2.265785] sgtl5000 1-000a: sgtl5000 revision 0x11
  272. [ 2.270422] mmc2: host does not support reading read-only switch, assuming write-enable
  273. [ 2.278100] mmc2: new high speed SDHC card at address aaaa
  274. [ 2.279470] mmcblk2: mmc2:aaaa SL08G 7.40 GiB
  275. [ 2.282342] mmcblk2: p1
  276. [ 2.293521] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1
  277. [ 2.335435] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered
  278. [ 2.341911] fsl-asoc-card sound: snd_soc_register_card failed (-517)
  279. [ 2.351441] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
  280. [ 2.730662] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
  281. [ 2.745117] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
  282. [ 2.755875] NET: Registered protocol family 10
  283. [ 2.763016] Segment Routing with IPv6
  284. [ 2.766867] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  285. [ 2.774420] NET: Registered protocol family 17
  286. [ 2.778961] can: controller area network core (rev 20170425 abi 9)
  287. [ 2.785285] NET: Registered protocol family 29
  288. [ 2.789793] can: raw protocol (rev 20170425)
  289. [ 2.794158] can: broadcast manager protocol (rev 20170425 t)
  290. [ 2.799903] can: netlink gateway (rev 20170425) max_hops=1
  291. [ 2.805894] Key type dns_resolver registered
  292. [ 2.814662] Registering SWP/SWPB emulation handler
  293. [ 2.865040] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  294. [ 2.878213] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
  295. [ 2.891199] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:30:54 UTC (1854)
  296. [ 2.900794] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2
  297. [ 2.909509] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2
  298. [ 2.909840] ALSA device list:
  299. [ 2.909847] #0: imx6-wandboard-sgtl5000
  300. [ 2.909852] #1: imx-spdif
  301. [ 2.928388] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2
  302. [ 2.937333] coda 2040000.vpu: firmware request failed
  303. [ 2.948238] EXT4-fs (mmcblk2p1): INFO: recovery required on readonly filesystem
  304. [ 2.955902] EXT4-fs (mmcblk2p1): write access will be enabled during recovery
  305. [ 2.992509] EXT4-fs (mmcblk2p1): recovery complete
  306. [ 3.006165] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
  307. [ 3.014445] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
  308. [ 3.024563] devtmpfs: mounted
  309. [ 3.029024] Freeing unused kernel memory: 1024K
  310. [ 3.117225] EXT4-fs (mmcblk2p1): re-mounted. Opts: data=ordered
  311. Starting logging: OK
  312. Initializing random number generator... done.
  313. Starting network: OK
  314.  
  315. Welcome to Buildroot
  316. buildroot login: root
  317. # uname -r
  318. 4.13.3
  319. #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!