API tools faq
paste
Advertisement
terracotta

Untitled

terracotta
Dec 22nd, 2023
54
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.52 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 6.1.67-gentoo-dist (portage@localhost) (i686-pc-linux-gnu-gcc (Gentoo 13.2.1_p20230826 p7) 13.2.1 20230826, GNU ld (Gentoo 2.40 p5) 2.40.0) #1 SMP PREEMPT_DYNAMIC Fri Dec 22 06:49:24 CET 2023
  2. [ 0.000000] Disabled fast string operations
  3. [ 0.000000] BIOS-provided physical RAM map:
  4. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
  5. [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
  6. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006fedffff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fee4fff] ACPI data
  9. [ 0.000000] BIOS-e820: [mem 0x000000006fee5000-0x000000006fefffff] ACPI NVS
  10. [ 0.000000] BIOS-e820: [mem 0x000000006ff00000-0x000000007fffffff] reserved
  11. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
  14. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
  15. [ 0.000000] SMBIOS 2.4 present.
  16. [ 0.000000] DMI: FUJITSU SIEMENS AMILO Li1705/AMILO Li1705, BIOS 1.0D-2308-8A20 08/13/2007
  17. [ 0.000000] tsc: Fast TSC calibration using PIT
  18. [ 0.000000] tsc: Detected 1861.879 MHz processor
  19. [ 0.008740] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  20. [ 0.008755] e820: remove [mem 0x000a0000-0x000fffff] usable
  21. [ 0.008783] last_pfn = 0x6fee0 max_arch_pfn = 0x100000
  22. [ 0.009520] x86/PAT: PAT not supported by the CPU.
  23. [ 0.010330] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  24. [ 0.027254] found SMP MP-table at [mem 0x000f8d90-0x000f8d9f]
  25. [ 0.027289] initial memory mapped: [mem 0x00000000-0x1d7fffff]
  26. [ 0.027413] RAMDISK: [mem 0x326fd000-0x35375fff]
  27. [ 0.027445] ACPI: Early table checksum verification disabled
  28. [ 0.027457] ACPI: RSDP 0x00000000000F8CE0 000014 (v00 PTLTD )
  29. [ 0.027478] ACPI: RSDT 0x000000006FEE039B 000038 (v01 FSC PC 06040000 LTP 00000000)
  30. [ 0.027504] ACPI: FACP 0x000000006FEE4D70 000074 (v01 FIC VA250 06040000 PTL_ 000F4240)
  31. [ 0.027533] ACPI: DSDT 0x000000006FEE0E12 003F5E (v01 FIC VA250 06040000 MSFT 0100000E)
  32. [ 0.027554] ACPI: FACS 0x000000006FEE5FC0 000040
  33. [ 0.027571] ACPI: APIC 0x000000006FEE4DE4 00006A (v01 PTLTD ? APIC 06040000 LTP 00000000)
  34. [ 0.027592] ACPI: MCFG 0x000000006FEE4E4E 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
  35. [ 0.027612] ACPI: SLIC 0x000000006FEE4E8A 000176 (v01 FSC PC 06040000 00000000)
  36. [ 0.027632] ACPI: SSDT 0x000000006FEE03D3 000519 (v01 PmRef CpuPm 00003000 INTL 20050228)
  37. [ 0.027648] ACPI: Reserving FACP table memory at [mem 0x6fee4d70-0x6fee4de3]
  38. [ 0.027655] ACPI: Reserving DSDT table memory at [mem 0x6fee0e12-0x6fee4d6f]
  39. [ 0.027661] ACPI: Reserving FACS table memory at [mem 0x6fee5fc0-0x6fee5fff]
  40. [ 0.027666] ACPI: Reserving APIC table memory at [mem 0x6fee4de4-0x6fee4e4d]
  41. [ 0.027671] ACPI: Reserving MCFG table memory at [mem 0x6fee4e4e-0x6fee4e89]
  42. [ 0.027676] ACPI: Reserving SLIC table memory at [mem 0x6fee4e8a-0x6fee4fff]
  43. [ 0.027682] ACPI: Reserving SSDT table memory at [mem 0x6fee03d3-0x6fee08eb]
  44. [ 0.027762] 914MB HIGHMEM available.
  45. [ 0.027766] 875MB LOWMEM available.
  46. [ 0.027770] mapped low ram: 0 - 36bfe000
  47. [ 0.027774] low ram: 0 - 36bfe000
  48. [ 0.027816] Zone ranges:
  49. [ 0.027819] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  50. [ 0.027828] Normal [mem 0x0000000001000000-0x0000000036bfdfff]
  51. [ 0.027836] HighMem [mem 0x0000000036bfe000-0x000000006fedffff]
  52. [ 0.027843] Movable zone start for each node
  53. [ 0.027846] Early memory node ranges
  54. [ 0.027848] node 0: [mem 0x0000000000001000-0x000000000009cfff]
  55. [ 0.027855] node 0: [mem 0x0000000000100000-0x000000006fedffff]
  56. [ 0.027861] Initmem setup node 0 [mem 0x0000000000001000-0x000000006fedffff]
  57. [ 0.027890] On node 0, zone DMA: 1 pages in unavailable ranges
  58. [ 0.028235] On node 0, zone DMA: 99 pages in unavailable ranges
  59. [ 0.070794] On node 0, zone HighMem: 288 pages in unavailable ranges
  60. [ 0.070821] Using APIC driver default
  61. [ 0.071237] ACPI: PM-Timer IO Port: 0x4008
  62. [ 0.071279] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  63. [ 0.071287] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  64. [ 0.071312] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
  65. [ 0.071327] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
  66. [ 0.071340] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  67. [ 0.071368] ACPI: Using ACPI (MADT) for SMP configuration information
  68. [ 0.071381] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  69. [ 0.071444] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
  70. [ 0.071453] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  71. [ 0.071458] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  72. [ 0.071462] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  73. [ 0.071467] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  74. [ 0.071476] [mem 0x80000000-0xfebfffff] available for PCI devices
  75. [ 0.071482] Booting paravirtualized kernel on bare hardware
  76. [ 0.071497] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  77. [ 0.071535] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
  78. [ 0.072137] percpu: Embedded 33 pages/cpu s103380 r0 d31788 u135168
  79. [ 0.072164] pcpu-alloc: s103380 r0 d31788 u135168 alloc=33*4096
  80. [ 0.072178] pcpu-alloc: [0] 0 [0] 1
  81. [ 0.072271] Built 1 zonelists, mobility grouping on. Total pages: 456174
  82. [ 0.072285] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist root=UUID=e57bc261-00a1-4183-a870-00f4941cef48 ro
  83. [ 0.072658] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist", will be passed to user space.
  84. [ 0.073202] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  85. [ 0.073462] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  86. [ 0.076472] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  87. [ 0.076508] Initializing HighMem for node 0 (00036bfe:0006fee0)
  88. [ 0.335118] Initializing Movable for node 0 (00000000:00000000)
  89. [ 0.359468] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  90. [ 0.359513] Memory: 1743208K/1833456K available (13813K kernel code, 2165K rwdata, 4572K rodata, 1060K init, 796K bss, 90248K reserved, 0K cma-reserved, 936840K highmem)
  91. [ 0.362524] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  92. [ 0.362754] ftrace: allocating 50608 entries in 99 pages
  93. [ 0.398386] ftrace: allocated 99 pages with 4 groups
  94. [ 0.398602] trace event string verifier disabled
  95. [ 0.398859] Dynamic Preempt: voluntary
  96. [ 0.399097] rcu: Preemptible hierarchical RCU implementation.
  97. [ 0.399101] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
  98. [ 0.399108] Trampoline variant of Tasks RCU enabled.
  99. [ 0.399110] Rude variant of Tasks RCU enabled.
  100. [ 0.399112] Tracing variant of Tasks RCU enabled.
  101. [ 0.399116] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  102. [ 0.399120] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  103. [ 0.442559] NR_IRQS: 2304, nr_irqs: 512, preallocated irqs: 16
  104. [ 0.442982] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  105. [ 0.443362] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
  106. [ 0.446666] Console: colour VGA+ 80x25
  107. [ 0.454198] printk: console [tty0] enabled
  108. [ 0.454338] ACPI: Core revision 20220331
  109. [ 0.455040] APIC: Switch to symmetric I/O mode setup
  110. [ 0.455126] Enabling APIC mode: Flat. Using 2 I/O APICs
  111. [ 0.455977] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  112. [ 0.527692] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
  113. [ 0.527769] ...trying to set up timer (IRQ0) through the 8259A ...
  114. [ 0.527845] ..... (found apic 0 pin 0) ...
  115. [ 0.538307] ....... works.
  116. [ 0.538384] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35ad0115ddd, max_idle_ns: 881590733046 ns
  117. [ 0.538501] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.91 BogoMIPS (lpj=6206263)
  118. [ 0.538629] Disabled fast string operations
  119. [ 0.538733] CPU0: Thermal monitoring enabled (TM1)
  120. [ 0.538866] process: using mwait in idle threads
  121. [ 0.538979] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
  122. [ 0.539058] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
  123. [ 0.539148] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  124. [ 0.539243] Spectre V2 : Mitigation: Retpolines
  125. [ 0.539317] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  126. [ 0.539406] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
  127. [ 0.539486] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
  128. [ 0.539570] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
  129. [ 0.539649] MMIO Stale Data: Unknown: No mitigations
  130. [ 0.539731] x86/fpu: x87 FPU will use FXSAVE
  131. [ 0.541335] Freeing SMP alternatives memory: 44K
  132. [ 0.541414] pid_max: default: 32768 minimum: 301
  133. [ 0.542226] LSM: Security Framework initializing
  134. [ 0.542317] Yama: becoming mindful.
  135. [ 0.542708] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  136. [ 0.542814] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  137. [ 0.654579] smpboot: CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz (family: 0x6, model: 0xe, stepping: 0xc)
  138. [ 0.655158] cblist_init_generic: Setting adjustable number of callback queues.
  139. [ 0.655158] cblist_init_generic: Setting shift to 1 and lim to 1.
  140. [ 0.655158] cblist_init_generic: Setting adjustable number of callback queues.
  141. [ 0.655158] cblist_init_generic: Setting shift to 1 and lim to 1.
  142. [ 0.655158] cblist_init_generic: Setting adjustable number of callback queues.
  143. [ 0.655158] cblist_init_generic: Setting shift to 1 and lim to 1.
  144. [ 0.655158] Performance Events: Core events, core PMU driver.
  145. [ 0.655158] ... version: 1
  146. [ 0.655158] ... bit width: 40
  147. [ 0.655158] ... generic registers: 2
  148. [ 0.655158] ... value mask: 000000ffffffffff
  149. [ 0.655158] ... max period: 000000007fffffff
  150. [ 0.655158] ... fixed-purpose events: 0
  151. [ 0.655158] ... event mask: 0000000000000003
  152. [ 0.655158] signal: max sigframe size: 1440
  153. [ 0.655158] rcu: Hierarchical SRCU implementation.
  154. [ 0.655158] rcu: Max phase no-delay instances is 1000.
  155. [ 0.656214] smp: Bringing up secondary CPUs ...
  156. [ 0.656902] x86: Booting SMP configuration:
  157. [ 0.656976] .... node #0, CPUs: #1
  158. [ 0.078778] Disabled fast string operations
  159. [ 0.675219] smp: Brought up 1 node, 2 CPUs
  160. [ 0.675440] smpboot: Max logical packages: 1
  161. [ 0.675511] smpboot: Total of 2 processors activated (7450.82 BogoMIPS)
  162. [ 0.680440] allocated 1835008 bytes of page_ext
  163. [ 0.681227] devtmpfs: initialized
  164. [ 0.683145] ACPI: PM: Registering ACPI NVS region [mem 0x6fee5000-0x6fefffff] (110592 bytes)
  165. [ 0.683559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  166. [ 0.683666] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  167. [ 0.684186] pinctrl core: initialized pinctrl subsystem
  168. [ 0.684786] PM: RTC time: 14:39:55, date: 2023-12-22
  169. [ 0.686116] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  170. [ 0.686952] audit: initializing netlink subsys (disabled)
  171. [ 0.688082] audit: type=2000 audit(1703255994.166:1): state=initialized audit_enabled=0 res=1
  172. [ 0.688602] thermal_sys: Registered thermal governor 'fair_share'
  173. [ 0.688610] thermal_sys: Registered thermal governor 'bang_bang'
  174. [ 0.688688] thermal_sys: Registered thermal governor 'step_wise'
  175. [ 0.688762] thermal_sys: Registered thermal governor 'user_space'
  176. [ 0.689032] cpuidle: using governor menu
  177. [ 0.689514] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  178. [ 0.690097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  179. [ 0.690207] PCI: not using MMCONFIG
  180. [ 0.690679] PCI: BIOS BUG #81[000fdd40] found
  181. [ 0.690752] PCI: Using configuration type 1 for base access
  182. [ 0.691251] mtrr: your CPUs had inconsistent variable MTRR settings
  183. [ 0.691328] mtrr: probably your BIOS does not setup all CPUs.
  184. [ 0.691400] mtrr: corrected configuration.
  185. [ 0.702604] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
  186. [ 0.800725] HugeTLB: registered 4.00 MiB page size, pre-allocated 0 pages
  187. [ 0.800820] HugeTLB: 0 KiB vmemmap can be freed for a 4.00 MiB page
  188. [ 0.801632] cryptd: max_cpu_qlen set to 1000
  189. [ 0.803230] raid6: skipped pq benchmark and selected sse2x2
  190. [ 0.803314] raid6: using intx1 recovery algorithm
  191. [ 0.803943] ACPI: Added _OSI(Module Device)
  192. [ 0.804018] ACPI: Added _OSI(Processor Device)
  193. [ 0.804090] ACPI: Added _OSI(3.0 _SCP Extensions)
  194. [ 0.804162] ACPI: Added _OSI(Processor Aggregator Device)
  195. [ 0.813577] ACPI: 2 ACPI AML tables successfully acquired and loaded
  196. [ 1.023441] ACPI: Dynamic OEM Table Load:
  197. [ 1.023545] ACPI: SSDT 0x00000000C1218000 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
  198. [ 1.025019] ACPI: Dynamic OEM Table Load:
  199. [ 1.025120] ACPI: SSDT 0x00000000C1891E00 0001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
  200. [ 1.025120] ACPI: Dynamic OEM Table Load:
  201. [ 1.025120] ACPI: SSDT 0x00000000C180AB40 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
  202. [ 1.025120] ACPI: Dynamic OEM Table Load:
  203. [ 1.025120] ACPI: SSDT 0x00000000C180A180 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
  204. [ 1.029445] ACPI: Interpreter enabled
  205. [ 1.029601] ACPI: PM: (supports S0 S3 S4 S5)
  206. [ 1.029673] ACPI: Using IOAPIC for interrupt routing
  207. [ 1.029854] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  208. [ 1.030059] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  209. [ 1.030152] PCI: Using MMCONFIG for extended config space
  210. [ 1.030246] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  211. [ 1.030335] PCI: Using E820 reservations for host bridge windows
  212. [ 1.032500] ACPI: Enabled 8 GPEs in block 00 to 0F
  213. [ 1.047153] ACPI: PM: Power Resource [PFAN]
  214. [ 1.048405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  215. [ 1.048516] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
  216. [ 1.048785] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
  217. [ 1.048797] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
  218. [ 1.048805] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
  219. [ 1.048814] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
  220. [ 1.048822] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff window] (ignored)
  221. [ 1.048831] acpi PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff window] (ignored)
  222. [ 1.048839] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff window] (ignored)
  223. [ 1.048847] acpi PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff window] (ignored)
  224. [ 1.048856] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfff7ffff window] (ignored)
  225. [ 1.048864] PCI: root bus 00: using default resources
  226. [ 1.049731] PCI host bridge to bus 0000:00
  227. [ 1.049807] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  228. [ 1.049887] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  229. [ 1.049970] pci_bus 0000:00: root bus resource [bus 00-ff]
  230. [ 1.050148] pci 0000:00:00.0: [1106:0364] type 00 class 0x060000
  231. [ 1.050249] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref]
  232. [ 1.050658] pci 0000:00:00.1: [1106:1364] type 00 class 0x060000
  233. [ 1.050999] pci 0000:00:00.2: [1106:2364] type 00 class 0x060000
  234. [ 1.051305] pci 0000:00:00.3: [1106:3364] type 00 class 0x060000
  235. [ 1.051805] pci 0000:00:00.4: [1106:4364] type 00 class 0x060000
  236. [ 1.052168] pci 0000:00:00.5: [1106:5364] type 00 class 0x080020
  237. [ 1.052672] pci 0000:00:00.6: [1106:6364] type 00 class 0x060000
  238. [ 1.053040] pci 0000:00:00.7: [1106:7364] type 00 class 0x060000
  239. [ 1.053484] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
  240. [ 1.053967] pci 0000:00:02.0: [1106:a364] type 01 class 0x060400
  241. [ 1.054213] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  242. [ 1.054587] pci 0000:00:03.0: [1106:c364] type 01 class 0x060400
  243. [ 1.054847] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
  244. [ 1.055271] pci 0000:00:0f.0: [1106:0591] type 00 class 0x01018f
  245. [ 1.055375] pci 0000:00:0f.0: reg 0x10: [io 0x4c70-0x4c77]
  246. [ 1.055465] pci 0000:00:0f.0: reg 0x14: [io 0x4c64-0x4c67]
  247. [ 1.055554] pci 0000:00:0f.0: reg 0x18: [io 0x4c68-0x4c6f]
  248. [ 1.055642] pci 0000:00:0f.0: reg 0x1c: [io 0x4c60-0x4c63]
  249. [ 1.055729] pci 0000:00:0f.0: reg 0x20: [io 0x4c40-0x4c4f]
  250. [ 1.055817] pci 0000:00:0f.0: reg 0x24: [io 0x4400-0x44ff]
  251. [ 1.056267] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
  252. [ 1.056415] pci 0000:00:0f.1: reg 0x20: [io 0x4c50-0x4c5f]
  253. [ 1.056520] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  254. [ 1.056600] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  255. [ 1.056678] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  256. [ 1.056757] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  257. [ 1.057205] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
  258. [ 1.057352] pci 0000:00:10.0: reg 0x20: [io 0x4c00-0x4c1f]
  259. [ 1.057502] pci 0000:00:10.0: supports D1 D2
  260. [ 1.057576] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  261. [ 1.057993] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
  262. [ 1.058140] pci 0000:00:10.1: reg 0x20: [io 0x4c20-0x4c3f]
  263. [ 1.058290] pci 0000:00:10.1: supports D1 D2
  264. [ 1.058364] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
  265. [ 1.058778] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
  266. [ 1.058882] pci 0000:00:10.4: reg 0x10: [mem 0xc9400000-0xc94000ff]
  267. [ 1.059078] pci 0000:00:10.4: supports D1 D2
  268. [ 1.059152] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
  269. [ 1.059573] pci 0000:00:11.0: [1106:3337] type 00 class 0x060100
  270. [ 1.060289] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
  271. [ 1.060637] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
  272. [ 1.060741] pci 0000:00:12.0: reg 0x10: [io 0x4800-0x48ff]
  273. [ 1.060830] pci 0000:00:12.0: reg 0x14: [mem 0xc9400400-0xc94004ff]
  274. [ 1.061016] pci 0000:00:12.0: supports D1 D2
  275. [ 1.061090] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
  276. [ 1.061547] pci 0000:00:13.0: [1106:337b] type 01 class 0x060400
  277. [ 1.062043] pci 0000:00:13.1: [1106:337a] type 01 class 0x060401
  278. [ 1.062607] pci_bus 0000:01: extended config space not accessible
  279. [ 1.062804] pci 0000:01:00.0: [1106:3371] type 00 class 0x030000
  280. [ 1.062905] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xbfffffff pref]
  281. [ 1.062997] pci 0000:01:00.0: reg 0x14: [mem 0xc8000000-0xc8ffffff]
  282. [ 1.063125] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  283. [ 1.063235] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  284. [ 1.063364] pci 0000:01:00.0: supports D1 D2
  285. [ 1.063774] pci 0000:00:01.0: PCI bridge to [bus 01]
  286. [ 1.063859] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
  287. [ 1.063941] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
  288. [ 1.064132] pci 0000:00:02.0: PCI bridge to [bus 02]
  289. [ 1.064347] pci 0000:00:03.0: PCI bridge to [bus 03]
  290. [ 1.064428] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
  291. [ 1.064509] pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
  292. [ 1.064632] pci_bus 0000:04: extended config space not accessible
  293. [ 1.064825] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
  294. [ 1.064932] pci 0000:04:01.0: reg 0x10: [mem 0xc9100000-0xc9103fff 64bit]
  295. [ 1.065136] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
  296. [ 1.065542] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  297. [ 1.065695] pci 0000:00:13.0: PCI bridge to [bus 04]
  298. [ 1.065776] pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
  299. [ 1.065917] pci_bus 0000:05: extended config space not accessible
  300. [ 1.066096] pci 0000:05:01.0: [168c:001a] type 00 class 0x020000
  301. [ 1.066200] pci 0000:05:01.0: reg 0x10: [mem 0xc9000000-0xc900ffff]
  302. [ 1.066587] pci 0000:00:13.1: PCI bridge to [bus 05] (subtractive decode)
  303. [ 1.066675] pci 0000:00:13.1: bridge window [mem 0xc9000000-0xc90fffff]
  304. [ 1.066761] pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
  305. [ 1.066851] pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  306. [ 1.066982] pci_bus 0000:00: on NUMA node 0
  307. [ 1.067407] ACPI: PCI: Interrupt link ALKA configured for IRQ 9
  308. [ 1.067487] ACPI: PCI: Interrupt link ALKA disabled
  309. [ 1.067758] ACPI: PCI: Interrupt link ALKB configured for IRQ 10
  310. [ 1.067836] ACPI: PCI: Interrupt link ALKB disabled
  311. [ 1.068101] ACPI: PCI: Interrupt link ALKC configured for IRQ 11
  312. [ 1.068179] ACPI: PCI: Interrupt link ALKC disabled
  313. [ 1.068443] ACPI: PCI: Interrupt link ALKD configured for IRQ 0
  314. [ 1.068503] ACPI: PCI: Interrupt link ALKD disabled
  315. [ 1.068845] ACPI: PCI: Interrupt link LNKA configured for IRQ 9
  316. [ 1.069177] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
  317. [ 1.069507] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
  318. [ 1.069787] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
  319. [ 1.069864] ACPI: PCI: Interrupt link LNKD disabled
  320. [ 1.075323] iommu: Default domain type: Translated
  321. [ 1.075323] iommu: DMA domain TLB invalidation policy: lazy mode
  322. [ 1.075914] SCSI subsystem initialized
  323. [ 1.076151] libata version 3.00 loaded.
  324. [ 1.076151] ACPI: bus type USB registered
  325. [ 1.076151] usbcore: registered new interface driver usbfs
  326. [ 1.076151] usbcore: registered new interface driver hub
  327. [ 1.076151] usbcore: registered new device driver usb
  328. [ 1.076151] pps_core: LinuxPPS API ver. 1 registered
  329. [ 1.076151] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  330. [ 1.076151] PTP clock support registered
  331. [ 1.078610] EDAC MC: Ver: 3.0.0
  332. [ 1.079494] NetLabel: Initializing
  333. [ 1.079569] NetLabel: domain hash size = 128
  334. [ 1.079639] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  335. [ 1.079780] NetLabel: unlabeled traffic allowed by default
  336. [ 1.079871] mctp: management component transport protocol core
  337. [ 1.079946] NET: Registered PF_MCTP protocol family
  338. [ 1.080034] PCI: Using ACPI for IRQ routing
  339. [ 1.087195] PCI: pci_cache_line_size set to 64 bytes
  340. [ 1.087215] pci 0000:00:13.1: can't claim BAR 14 [mem 0xc9000000-0xc90fffff]: address conflict with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
  341. [ 1.087388] pci 0000:05:01.0: can't claim BAR 0 [mem 0xc9000000-0xc900ffff]: address conflict with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
  342. [ 1.087538] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
  343. [ 1.087549] e820: reserve RAM buffer [mem 0x6fee0000-0x6fffffff]
  344. [ 1.088592] pci 0000:01:00.0: vgaarb: setting as boot VGA device
  345. [ 1.088629] pci 0000:01:00.0: vgaarb: bridge control possible
  346. [ 1.088704] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  347. [ 1.091838] vgaarb: loaded
  348. [ 1.108495] clocksource: Switched to clocksource tsc-early
  349. [ 1.215315] VFS: Disk quotas dquot_6.6.0
  350. [ 1.215508] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  351. [ 1.215946] pnp: PnP ACPI init
  352. [ 1.216506] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  353. [ 1.216601] system 00:00: [mem 0xf0012000-0xf0012fff] has been reserved
  354. [ 1.216683] system 00:00: [mem 0xf0013000-0xf0013fff] has been reserved
  355. [ 1.217678] pnp 00:02: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
  356. [ 1.217868] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
  357. [ 1.217953] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
  358. [ 1.218037] system 00:02: [mem 0xe0000000-0xe01010ff] has been reserved
  359. [ 1.218119] system 00:02: [mem 0xe00100ff-0xe00190fe] has been reserved
  360. [ 1.218202] system 00:02: [mem 0xe00700ff-0xe007a0fe] has been reserved
  361. [ 1.218341] system 00:02: [mem 0xe00800ff-0xe00a00fe] has been reserved
  362. [ 1.218449] system 00:02: [mem 0xe01000ff-0xe06000fe] could not be reserved
  363. [ 1.218533] system 00:02: [mem 0xf00120ff-0xf00140fe] could not be reserved
  364. [ 1.218615] system 00:02: [mem 0xffb80000-0xffc7ffff] has been reserved
  365. [ 1.218697] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved
  366. [ 1.218779] system 00:02: [mem 0xffee0000-0xffefffff] has been reserved
  367. [ 1.218860] system 00:02: [mem 0xfec00000-0xfec0ffff] could not be reserved
  368. [ 1.218942] system 00:02: [mem 0xfee00000-0xfee0ffff] could not be reserved
  369. [ 1.219484] system 00:03: [io 0x04d0-0x04d1] has been reserved
  370. [ 1.219569] system 00:03: [io 0xfe10-0xfe11] has been reserved
  371. [ 1.219648] system 00:03: [io 0xfe00] has been reserved
  372. [ 1.219725] system 00:03: [io 0x4000-0x407f] has been reserved
  373. [ 1.219804] system 00:03: [io 0x4100-0x411f] has been reserved
  374. [ 1.221352] pnp: PnP ACPI: found 6 devices
  375. [ 1.264882] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  376. [ 1.265500] NET: Registered PF_INET protocol family
  377. [ 1.266008] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  378. [ 1.268549] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  379. [ 1.268657] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  380. [ 1.268835] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  381. [ 1.269001] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  382. [ 1.269278] TCP: Hash tables configured (established 8192 bind 8192)
  383. [ 1.269726] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
  384. [ 1.269911] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  385. [ 1.270022] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  386. [ 1.270511] NET: Registered PF_UNIX/PF_LOCAL protocol family
  387. [ 1.270621] NET: Registered PF_XDP protocol family
  388. [ 1.270725] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
  389. [ 1.270826] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
  390. [ 1.270929] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
  391. [ 1.271029] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
  392. [ 1.271175] pci 0000:00:02.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
  393. [ 1.271260] pci 0000:00:02.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
  394. [ 1.271352] pci 0000:00:03.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
  395. [ 1.271444] pci 0000:00:13.1: BAR 14: assigned [mem 0x80600000-0x806fffff]
  396. [ 1.271527] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
  397. [ 1.271621] pci 0000:00:01.0: PCI bridge to [bus 01]
  398. [ 1.271704] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
  399. [ 1.271866] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
  400. [ 1.271964] pci 0000:00:02.0: PCI bridge to [bus 02]
  401. [ 1.272040] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
  402. [ 1.272122] pci 0000:00:02.0: bridge window [mem 0x80000000-0x801fffff]
  403. [ 1.272204] pci 0000:00:02.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
  404. [ 1.272299] pci 0000:00:03.0: PCI bridge to [bus 03]
  405. [ 1.272375] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
  406. [ 1.272457] pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
  407. [ 1.272539] pci 0000:00:03.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
  408. [ 1.272638] pci 0000:00:13.0: PCI bridge to [bus 04]
  409. [ 1.272717] pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
  410. [ 1.272861] pci 0000:05:01.0: BAR 0: assigned [mem 0x80600000-0x8060ffff]
  411. [ 1.272975] pci 0000:00:13.1: PCI bridge to [bus 05]
  412. [ 1.273066] pci 0000:00:13.1: bridge window [mem 0x80600000-0x806fffff]
  413. [ 1.273155] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  414. [ 1.273233] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  415. [ 1.273312] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc8ffffff]
  416. [ 1.273390] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref]
  417. [ 1.273470] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
  418. [ 1.273547] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
  419. [ 1.273626] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
  420. [ 1.273714] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
  421. [ 1.273791] pci_bus 0000:03: resource 1 [mem 0xc9000000-0xc90fffff]
  422. [ 1.273869] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
  423. [ 1.273958] pci_bus 0000:04: resource 1 [mem 0xc9100000-0xc91fffff]
  424. [ 1.274037] pci_bus 0000:05: resource 1 [mem 0x80600000-0x806fffff]
  425. [ 1.274115] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
  426. [ 1.274192] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
  427. [ 1.274474] pci 0000:00:00.0: MSI quirk detected; MSI disabled
  428. [ 1.274614] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
  429. [ 1.274698] pci 0000:00:02.0: disabling DAC on VIA PCI bridge
  430. [ 1.274780] pci 0000:00:03.0: disabling DAC on VIA PCI bridge
  431. [ 2.942145] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
  432. [ 2.942500] pci 0000:00:10.4: quirk_usb_early_handoff+0x0/0x6d0 took 1627759 usecs
  433. [ 2.942636] pci 0000:00:13.0: disabling DAC on VIA PCI bridge
  434. [ 2.942720] pci 0000:00:13.1: disabling DAC on VIA PCI bridge
  435. [ 2.942821] PCI: CLS 32 bytes, default 64
  436. [ 2.943176] Trying to unpack rootfs image as initramfs...
  437. [ 2.946878] apm: BIOS not found.
  438. [ 2.950097] Initialise system trusted keyrings
  439. [ 2.950414] Key type blacklist registered
  440. [ 2.951101] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  441. [ 2.965123] zbud: loaded
  442. [ 2.972536] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
  443. [ 3.021933] NET: Registered PF_ALG protocol family
  444. [ 3.022223] xor: measuring software checksum speed
  445. [ 3.027125] pIII_sse : 2086 MB/sec
  446. [ 3.031520] prefetch64-sse : 2294 MB/sec
  447. [ 3.031597] xor: using function: prefetch64-sse (2294 MB/sec)
  448. [ 3.031685] Key type asymmetric registered
  449. [ 3.031757] Asymmetric key parser 'x509' registered
  450. [ 3.955491] tsc: Refined TSC clocksource calibration: 1861.999 MHz
  451. [ 3.955635] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade44ba74, max_idle_ns: 881590729106 ns
  452. [ 3.956640] clocksource: Switched to clocksource tsc
  453. [ 5.152437] Freeing initrd memory: 45540K
  454. [ 5.163531] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  455. [ 5.163914] bounce: pool size: 64 pages
  456. [ 5.164184] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  457. [ 5.164452] io scheduler mq-deadline registered
  458. [ 5.164533] io scheduler kyber registered
  459. [ 5.164836] io scheduler bfq registered
  460. [ 5.166037] atomic64_test: passed for i586+ platform with CX8 and with SSE
  461. [ 5.167829] ACPI: \_PR_.CPU0: Found 2 idle states
  462. [ 5.168122] ACPI: \_PR_.CPU1: Found 2 idle states
  463. [ 5.169735] ACPI: AC: AC Adapter [ACAD] (on-line)
  464. [ 5.170041] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  465. [ 5.170245] ACPI: button: Power Button [PWRB]
  466. [ 5.170465] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
  467. [ 5.170732] ACPI: button: Lid Switch [LID]
  468. [ 5.171018] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  469. [ 5.171226] ACPI: button: Power Button [PWRF]
  470. [ 5.171741] ACPI: \_PR_.CPU0: Found 2 idle states
  471. [ 5.171822] tsc: Marking TSC unstable due to TSC halts in idle
  472. [ 5.172108] clocksource: Checking clocksource tsc synchronization from CPU 1 to CPUs 0.
  473. [ 5.172288] clocksource: Switched to clocksource acpi_pm
  474. [ 5.172576] ACPI: \_PR_.CPU1: Found 2 idle states
  475. [ 5.178675] thermal LNXTHERM:00: registered as thermal_zone0
  476. [ 5.178760] ACPI: thermal: Thermal Zone [THRM] (47 C)
  477. [ 5.179570] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  478. [ 5.179995] ACPI: battery: Slot [BAT0] (battery absent)
  479. [ 5.190932] Non-volatile memory driver v1.3
  480. [ 5.191048] Linux agpgart interface v0.103
  481. [ 5.191616] agpgart: Detected VIA P4M900 chipset
  482. [ 5.201239] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xc0000000
  483. [ 5.201671] ACPI: bus type drm_connector registered
  484. [ 5.207090] ehci-pci 0000:00:10.4: EHCI Host Controller
  485. [ 5.207353] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
  486. [ 5.207574] ehci-pci 0000:00:10.4: irq 21, io mem 0xc9400000
  487. [ 5.218854] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
  488. [ 5.219166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  489. [ 5.219261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  490. [ 5.219350] usb usb1: Product: EHCI Host Controller
  491. [ 5.219424] usb usb1: Manufacturer: Linux 6.1.67-gentoo-dist ehci_hcd
  492. [ 5.219501] usb usb1: SerialNumber: 0000:00:10.4
  493. [ 5.220079] hub 1-0:1.0: USB hub found
  494. [ 5.220201] hub 1-0:1.0: 4 ports detected
  495. [ 5.221474] uhci_hcd 0000:00:10.0: UHCI Host Controller
  496. [ 5.222609] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  497. [ 5.222709] uhci_hcd 0000:00:10.0: detected 2 ports
  498. [ 5.222835] uhci_hcd 0000:00:10.0: irq 20, io port 0x00004c00
  499. [ 5.223111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  500. [ 5.223206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  501. [ 5.223294] usb usb2: Product: UHCI Host Controller
  502. [ 5.223368] usb usb2: Manufacturer: Linux 6.1.67-gentoo-dist uhci_hcd
  503. [ 5.223445] usb usb2: SerialNumber: 0000:00:10.0
  504. [ 5.223986] hub 2-0:1.0: USB hub found
  505. [ 5.224086] hub 2-0:1.0: 2 ports detected
  506. [ 5.224880] uhci_hcd 0000:00:10.1: UHCI Host Controller
  507. [ 5.225185] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  508. [ 5.225283] uhci_hcd 0000:00:10.1: detected 2 ports
  509. [ 5.225407] uhci_hcd 0000:00:10.1: irq 22, io port 0x00004c20
  510. [ 5.225693] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  511. [ 5.225788] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  512. [ 5.225876] usb usb3: Product: UHCI Host Controller
  513. [ 5.225950] usb usb3: Manufacturer: Linux 6.1.67-gentoo-dist uhci_hcd
  514. [ 5.226027] usb usb3: SerialNumber: 0000:00:10.1
  515. [ 5.226520] hub 3-0:1.0: USB hub found
  516. [ 5.226619] hub 3-0:1.0: 2 ports detected
  517. [ 5.227380] usbcore: registered new interface driver usbserial_generic
  518. [ 5.227501] usbserial: USB Serial support registered for generic
  519. [ 5.227901] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  520. [ 5.230313] i8042: Detected active multiplexing controller, rev 1.1
  521. [ 5.231820] serio: i8042 KBD port at 0x60,0x64 irq 1
  522. [ 5.231910] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  523. [ 5.232142] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  524. [ 5.232480] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  525. [ 5.232657] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  526. [ 5.233174] mousedev: PS/2 mouse device common for all mice
  527. [ 5.233935] rtc_cmos 00:01: RTC can wake from S4
  528. [ 5.234785] rtc_cmos 00:01: registered as rtc0
  529. [ 5.234934] rtc_cmos 00:01: setting system clock to 2023-12-22T14:39:59 UTC (1703255999)
  530. [ 5.235113] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram
  531. [ 5.235505] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
  532. [ 5.235743] device-mapper: uevent: version 1.0.3
  533. [ 5.236250] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
  534. [ 5.236865] intel_pstate: CPU model not supported
  535. [ 5.237856] hid: raw HID events driver (C) Jiri Kosina
  536. [ 5.238092] usbcore: registered new interface driver usbhid
  537. [ 5.238168] usbhid: USB HID core driver
  538. [ 5.238758] drop_monitor: Initializing network drop monitor service
  539. [ 5.239263] Initializing XFRM netlink socket
  540. [ 5.240124] NET: Registered PF_INET6 protocol family
  541. [ 5.252817] Segment Routing with IPv6
  542. [ 5.252910] RPL Segment Routing with IPv6
  543. [ 5.253053] In-situ OAM (IOAM) with IPv6
  544. [ 5.253242] mip6: Mobile IPv6
  545. [ 5.253329] NET: Registered PF_PACKET protocol family
  546. [ 5.254653] microcode: sig=0x6ec, pf=0x80, revision=0x5b
  547. [ 5.254766] microcode: Microcode Update Driver: v2.2.
  548. [ 5.254790] IPI shorthand broadcast: enabled
  549. [ 5.255292] registered taskstats version 1
  550. [ 5.255740] Loading compiled-in X.509 certificates
  551. [ 5.256333] zswap: loaded using pool lzo/zbud
  552. [ 5.257038] Key type .fscrypt registered
  553. [ 5.257114] Key type fscrypt-provisioning registered
  554. [ 5.260814] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  555. [ 5.261046] Key type big_key registered
  556. [ 5.265092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  557. [ 5.272344] Key type encrypted registered
  558. [ 5.272474] ima: No TPM chip found, activating TPM-bypass!
  559. [ 5.272557] ima: Allocated hash algorithm: sha256
  560. [ 5.272678] ima: No architecture policies found
  561. [ 5.272830] evm: Initialising EVM extended attributes:
  562. [ 5.272904] evm: security.selinux
  563. [ 5.272972] evm: security.SMACK64 (disabled)
  564. [ 5.273043] evm: security.SMACK64EXEC (disabled)
  565. [ 5.273113] evm: security.SMACK64TRANSMUTE (disabled)
  566. [ 5.273185] evm: security.SMACK64MMAP (disabled)
  567. [ 5.273255] evm: security.apparmor
  568. [ 5.273323] evm: security.ima
  569. [ 5.273390] evm: security.capability
  570. [ 5.273458] evm: HMAC attrs: 0x1
  571. [ 5.284235] PM: Magic number: 3:309:688
  572. [ 5.284508] pci 0000:00:0f.1: hash matches
  573. [ 5.284880] Unstable clock detected, switching default tracing clock to "global"
  574. If you want to keep using the local clock, then add:
  575. "trace_clock=local"
  576. on the kernel command line
  577. [ 5.291962] Freeing unused kernel image (initmem) memory: 1060K
  578. [ 5.312399] Write protecting kernel text and read-only data: 18388k
  579. [ 5.312504] Run /init as init process
  580. [ 5.312574] with arguments:
  581. [ 5.312580] /init
  582. [ 5.312586] with environment:
  583. [ 5.312590] HOME=/
  584. [ 5.312595] TERM=linux
  585. [ 5.312599] BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist
  586. [ 5.468893] usb 1-4: new high-speed USB device number 2 using ehci-pci
  587. [ 5.579803] dracut: Gentoo-2.14
  588. [ 5.671085] usb 1-4: New USB device found, idVendor=24a9, idProduct=205a, bcdDevice= 2.00
  589. [ 5.671209] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
  590. [ 5.671293] usb 1-4: Product: USB_0114
  591. [ 5.671369] usb 1-4: Manufacturer: ASolid
  592. [ 5.671444] usb 1-4: SerialNumber: 30562908
  593. [ 6.540227] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
  594. [ 6.544658] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input12
  595. [ 6.561620] pata_via 0000:00:0f.1: version 0.3.4
  596. [ 6.575139] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
  597. [ 6.607156] sata_via 0000:00:0f.0: version 2.6
  598. [ 6.610204] sata_via 0000:00:0f.0: routed to hard irq line 10
  599. [ 6.621567] scsi host0: pata_via
  600. [ 6.638509] scsi host1: sata_via
  601. [ 6.644769] scsi host3: sata_via
  602. [ 6.645134] ata3: SATA max UDMA/133 cmd 0x4c70 ctl 0x4c64 bmdma 0x4c40 irq 21
  603. [ 6.645223] ata4: SATA max UDMA/133 cmd 0x4c68 ctl 0x4c60 bmdma 0x4c48 irq 21
  604. [ 6.648578] scsi host2: pata_via
  605. [ 6.648971] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c50 irq 14
  606. [ 6.649059] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4c58 irq 15
  607. [ 6.716451] usb-storage 1-4:1.0: USB Mass Storage device detected
  608. [ 6.724665] scsi host4: usb-storage 1-4:1.0
  609. [ 6.736478] usbcore: registered new interface driver usb-storage
  610. [ 6.848852] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  611. [ 7.040052] ata3.00: ATA-7: WDC WD1600BEVS-07RST0, 04.01G04, max UDMA/133
  612. [ 7.040143] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  613. [ 7.045919] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 1G04 PQ: 0 ANSI: 5
  614. [ 7.047696] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  615. [ 7.047809] sd 1:0:0:0: Attached scsi generic sg0 type 0
  616. [ 7.047863] sd 1:0:0:0: [sda] Write Protect is off
  617. [ 7.047966] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  618. [ 7.048171] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  619. [ 7.048433] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  620. [ 7.067368] sda: sda1 sda2 sda3
  621. [ 7.068228] sd 1:0:0:0: [sda] Attached SCSI disk
  622. [ 7.252192] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
  623. [ 7.424929] ata2.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
  624. [ 7.431581] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
  625. [ 7.520177] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  626. [ 7.520285] cdrom: Uniform CD-ROM driver Revision: 3.20
  627. [ 7.567091] sr 2:0:0:0: Attached scsi CD-ROM sr0
  628. [ 7.568136] sr 2:0:0:0: Attached scsi generic sg1 type 5
  629. [ 7.573054] usbcore: registered new interface driver uas
  630. [ 7.743209] scsi 4:0:0:0: Direct-Access ASolid USB 0000 PQ: 0 ANSI: 4
  631. [ 7.744174] sd 4:0:0:0: Attached scsi generic sg2 type 0
  632. [ 7.744926] sd 4:0:0:0: [sdb] 122664961 512-byte logical blocks: (62.8 GB/58.5 GiB)
  633. [ 7.745684] sd 4:0:0:0: [sdb] Write Protect is off
  634. [ 7.745777] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
  635. [ 7.746436] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  636. [ 7.753988] sdb: sdb1 sdb2
  637. [ 7.754763] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  638. [ 8.452878] XFS (sda3): Mounting V5 Filesystem
  639. [ 8.676501] XFS (sda3): Starting recovery (logdev: internal)
  640. [ 8.757997] XFS (sda3): Ending recovery (logdev: internal)
  641. [ 8.982998] dracut: Remounting /dev/disk/by-uuid/e57bc261-00a1-4183-a870-00f4941cef48 with -o defaults,noatime,ro
  642. [ 9.175673] dracut: Mounted root filesystem /dev/sda3
  643. [ 9.435957] dracut: Switching root
  644. [ 10.593201] random: crng init done
  645. [ 18.307886] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 597bdfe2, 00:14:0b:3c:71:16, IRQ 23
  646. [ 18.308686] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link c541
  647. [ 18.688114] input: PC Speaker as /devices/platform/pcspkr/input/input13
  648. [ 19.045144] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
  649. [ 19.240737] intel_powerclamp: No package C-state available
  650. [ 19.548978] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  651. [ 19.557209] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  652. [ 19.557265] Loading firmware: regulatory.db
  653. [ 19.628237] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  654. [ 19.628269] cfg80211: failed to load regulatory.db
  655. [ 20.445771] snd_hda_intel 0000:04:01.0: CORB reset timeout#1, CORBRP = 0
  656. [ 20.488176] ath5k 0000:05:01.0: registered as 'phy0'
  657. [ 20.862541] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
  658. [ 20.862574] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  659. [ 20.862585] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x20/0x0/0x0/0x0/0x0)
  660. [ 20.862595] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
  661. [ 20.862602] snd_hda_codec_via hdaudioC0D0: inputs:
  662. [ 20.862610] snd_hda_codec_via hdaudioC0D0: Mic=0x1d
  663. [ 20.962512] input: HDA VIA VT82xx Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input14
  664. [ 20.962821] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input15
  665. [ 20.963087] input: HDA VIA VT82xx Speaker as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input16
  666. [ 21.119831] ath: EEPROM regdomain: 0x30
  667. [ 21.119852] ath: EEPROM indicates we should expect a direct regpair map
  668. [ 21.119858] ath: Country alpha2 being used: AM
  669. [ 21.119863] ath: Regpair used: 0x30
  670. [ 21.119947] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  671. [ 21.121577] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
  672. [ 21.130396] ath5k 0000:05:01.0 wlp5s1: renamed from wlan0
  673. [ 21.947449] Truncating oversized swap area, only using 2097152k out of 4194300k
  674. [ 21.950030] Adding 2097148k swap on /dev/sda2. Priority:-2 extents:1 across:2097148k FS
  675. [ 22.118931] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
  676. [ 26.078096] 8021q: 802.1Q VLAN Support v1.8
  677. [ 26.362455] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s18: link becomes ready
  678. [ 94.974474] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Quota mode: none.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!