Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.24 20191016
- In
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 416MHz 0,1
- Channel 0: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- change freq to 856MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x40
- ch 1 ddrconfig = 0x101, ddrsize = 0x40
- pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
- ddr_set_rate to 328MHZ
- ddr_set_rate to 666MHZ
- ddr_set_rate to 928MHZ
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- ddr_set_rate to 416MHZ, ctl_index 0
- ddr_set_rate to 856MHZ, ctl_index 1
- support 416 856 328 666 928 MHz, current 856MHz
- OUT
- Boot1: 2019-03-14, version: 1.19
- CPUId = 0x0
- ChipType = 0x10, 254
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=14910MB
- FwPartOffset=2000 , 100000
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- SdmmcInit=0 1
- StorageInit ok = 67678
- SecureMode = 0
- SecureInit read PBA: 0x4
- SecureInit read PBA: 0x404
- SecureInit read PBA: 0x804
- SecureInit read PBA: 0xc04
- SecureInit read PBA: 0x1004
- SecureInit read PBA: 0x1404
- SecureInit read PBA: 0x1804
- SecureInit read PBA: 0x1c04
- SecureInit ret = 0, SecureMode = 0
- atags_set_bootdev: ret:(0)
- GPT 0x3380ec0 signature is wrong
- recovery gpt...
- GPT 0x3380ec0 signature is wrong
- recovery gpt fail!
- LoadTrust Addr:0x4000
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xdcfd8
- RunBL31 0x40000
- NOTICE: BL31: v1.3(debug):42583b6
- NOTICE: BL31: Built : 07:55:13, Oct 15 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1190): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2020.07-armbian (Oct 13 2020 - 16:49:59 +0200)
- SoC: Rockchip rk3399
- Reset cause: POR
- DRAM: 3.9 GiB
- PMIC: RK808
- SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- MMC: mmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Model: Helios64
- Revision: 1.2 - 4GB non ECC
- Net: eth0: ethernet@fe300000
- scanning bus for devices...
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- switch to partitions #0, OK
- mmc0(part 0) is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3185 bytes read in 18 ms (171.9 KiB/s)
- ## Executing script at 00500000
- Boot script loaded from mmc 0
- 166 bytes read in 15 ms (10.7 KiB/s)
- 16807894 bytes read in 1622 ms (9.9 MiB/s)
- 29792768 bytes read in 2857 ms (9.9 MiB/s)
- 86670 bytes read in 42 ms (2 MiB/s)
- 2698 bytes read in 34 ms (77.1 KiB/s)
- Applying kernel provided DT fixup script (rockchip-fixup.scr)
- ## Executing script at 09000000
- ## Loading init Ramdisk from Legacy Image at 06000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 16807830 Bytes = 16 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f4edf000, end f5ee6796 ... OK
- Loading Device Tree to 00000000f4e61000, end 00000000f4edefff ... OK
- Starting kernel ...
- [ 16.728049] Internal error: Oops: 0000000096000047 [#1] PREEMPT SMP
- [ 16.728622] Modules linked in: r8152 snd_soc_hdmi_codec hantro_vpu rockchip_vdec(C) v4l2_vp9 sg videobuf2_dma_contig rockchip_rga v4l2_h264 videobuf2_dma_sg v4l2_mem2mem snd_soc_rockchip_i2s snd_soc_core snd_compress videobuf2_memops snd_pcm_dmaengine snd_pcm videobuf2_v4l2 snd_timer videobuf2_common leds_pwm fusb302 panfrost snd rockchip_rng tcpm gpu_sched videodev typec rng_core soundcore drm_shmem_helper gpio_charger mc pwm_fan gpio_beeper cpufreq_dt softdog lm75 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac pcs_xpcs adc_keys
- [ 16.734276] CPU: 5 PID: 468 Comm: kworker/5:5 Tainted: G C 6.1.50-current-rockchip64 #3
- [ 16.735113] Hardware name: Helios64 (DT)
- [ 16.735467] Workqueue: events dbs_work_handler
- [ 16.735887] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
- [ 16.736508] pc : arch_stack_walk+0x108/0x250
- [ 16.736903] lr : return_address+0x40/0x80
- [ 16.737268] sp : ffff80000b3eb440
- [ 16.737567] x29: ffff80000b3eb440 x28: ffff0000040d8cf8 x27: 00000000000000fa
- [ 16.738212] x26: 000000003b9aca00 x25: 0000000001000001 x24: 0000000000000000
- [ 16.738854] x23: ffff800008022100 x22: 0000000000000000 x21: ffff80000b3eb528
- [ 16.739496] x20: ffff800008022090 x19: ffff000007c0bc00 x18: ffff80000e533c58
- [ 16.740138] x17: 0000000000000000 x16: ffff0000f7783f00 x15: 0000000000000001
- [ 16.740779] x14: 0000000000000000 x13: 00000000000002cd x12: 00000000002104d5
- [ 16.741420] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80000b3eb470
- [ 16.742062] x8 : ffff80000b3eb4b8 x7 : 0000000000000000 x6 : ffff0000040d8d00
- [ 16.742703] x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030
- [ 16.743343] x2 : 0000000000000008 x1 : ffff800008022100 x0 : ffff80000b3eb510
- [ 16.743985] Call trace:
- [ 16.744209] arch_stack_walk+0x108/0x250
- [ 16.744568] return_address+0x40/0x80
- [ 16.744901] preempt_count_add+0xcc/0x150
- [ 16.745266] _raw_spin_lock_irqsave+0x28/0xc0
- [ 16.745660] finish_wait+0x3c/0x80
- [ 16.745970] rk3x_i2c_xfer_common.isra.0+0x3e0/0x480
- [ 16.746417] rk3x_i2c_xfer+0x18/0x24
- [ 16.746740] __i2c_transfer+0x15c/0x7b4
- [ 16.747089] i2c_transfer+0x60/0x12c
- [ 16.747414] i2c_transfer_buffer_flags+0x5c/0x90
- [ 16.747830] regmap_i2c_write+0x20/0x60
- [ 16.748182] _regmap_raw_write_impl+0x5e4/0x8dc
- [ 16.748590] _regmap_bus_raw_write+0x60/0x80
- [ 16.748976] _regmap_write+0x60/0x184
- [ 16.749308] _regmap_update_bits+0x100/0x11c
- [ 16.749694] regmap_update_bits_base+0x64/0x9c
- [ 16.750094] regulator_set_voltage_sel_regmap+0x50/0xa0
- [ 16.750569] _regulator_call_set_voltage_sel+0x74/0xd0
- [ 16.751033] _regulator_do_set_voltage+0x460/0x580
- [ 16.751468] regulator_set_voltage_rdev+0xac/0x250
- [ 16.751902] regulator_do_balance_voltage+0x1f8/0x430
- [ 16.752359] regulator_balance_voltage+0x58/0x80
- [ 16.752778] regulator_set_voltage_unlocked+0xa8/0x120
- [ 16.753244] regulator_set_voltage+0x50/0xa0
- [ 16.753632] _opp_config_regulator_single+0x50/0x190
- [ 16.754079] _set_opp+0xc0/0x444
- [ 16.754375] dev_pm_opp_set_rate+0x114/0x27c
- [ 16.754761] set_target+0x30/0x40 [cpufreq_dt]
- [ 16.755177] __cpufreq_driver_target+0x378/0x74c
- [ 16.755597] od_dbs_update+0xbc/0x1b0
- [ 16.755930] dbs_work_handler+0x40/0x7c
- [ 16.756278] process_one_work+0x1fc/0x480
- [ 16.756641] worker_thread+0x14c/0x444
- [ 16.756980] kthread+0xf8/0xfc
- [ 16.757263] ret_from_fork+0x10/0x20
- [ 16.757593] Code: f94082c1 f90033b3 f94076c0 f90027a0 (f9002ba1)
- [ 16.758138] ---[ end trace 0000000000000000 ]---
- [ 16.758551] note: kworker/5:5[468] exited with irqs disabled
- [ 16.760508] note: kworker/5:5[468] exited with preempt_count 1
- [ 20.020487] NFSD: Using UMH upcall client tracking operations.
- [ 20.021060] NFSD: starting 90-second grace period (net f0000000)
Add Comment
Please, Sign In to add comment