pulse-2.6.32-by:Pier11-FTB

<5>Linux version 2.6.32.9-perf (eclipse@eclipse3) (gcc version 4.4.3 (GCC) ) #97 PREEMPT Sat Dec 3 07:41:01 EST 2011
<4>CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>Machine: QCT SURF7201A Board
<6>Partition (from atag) boot -- Offset:130 Size:28
<6>Partition (from atag) recovery -- Offset:158 Size:28
<6>Partition (from atag) misc -- Offset:180 Size:a
<6>Partition (from atag) splash -- Offset:18a Size:3
<6>Partition (from atag) system -- Offset:18d Size:550
<6>Partition (from atag) cache -- Offset:6dd Size:230
<6>Partition (from atag) userdata -- Offset:90d Size:653
<6>Partition (from atag) userdata2 -- Offset:f60 Size:a0
<4>########proc_misc.c: tag_boot_flash_id= Sams-0x5500bcec
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c0469170, node_mem_map c05a9000
<7>  Normal zone: 512 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 65024 pages, LIFO batch:15
<6>allocating 2097152 bytes at c0800000 (10800000 physical) for kernel ebi1 pmem arena
<6>allocating 8388608 bytes at c102a000 (1102a000 physical) for mdp pmem arena
<6>allocating 10485760 bytes at c182a000 (1182a000 physical) for camera pmem arena
<6>allocating 8388608 bytes at c222a000 (1222a000 physical) for adsp pmem arena
<6>allocating 8388608 bytes at c2b00000 (12b00000 physical) for gpu1 pmem arena
<6>allocating 2097152 bytes at c3300000 (13300000 physical) for fb
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>Kernel command line: mem=256M  fbcon=font:VGA8x8 console=tty0 fbcon=rotate:1 quiet no_console_suspend=1 rootdelay=20 androidboot.hardware=qcom console=ttyUSBCONSOLE0 androidboot.console=ttyUSBCONSOLE0 androidboot.localproppath=hw/default
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 256MB = 256MB total
<5>Memory: 214716KB available (4152K code, 1329K data, 152K init, 0K highmem)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:261
<4>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<3>smem_find(137, 64): wrong size 56
<6>socinfo_init: v2, id=16, ver=2.0, raw_id=368, raw_ver=3
<6>acpu_clock_init()
<6>L val: PLL0: 12, PLL1: 50, PLL2: 55
<6>Turbo mode supported and enabled.
<6>ACPU running at 528000 KHz
<6>Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
<6> 0   19200  -1   1   19200    1   30720 -1 -1 -1  4  1  3
<6> 1  120000   1   8   60000    2   61440 -1 -1 -1  4  5  6
<6> 2  122880   0   2   61440    2   61440 -1  1 -1  4  5  6
<6> 3  176000   2   6   88000    2   61440  2  1 -1  4  5  6
<6> 4  245760   0   1   81920    3   61440  2  1  3 -1  7  6
<6> 5  320000   1   3  107000    3  120000  2  1  3 -1  7  8
<6> 6  352000   2   3   88000    4  120000  2  1  3 -1  7  8
<6> 7  480000   1   2  120000    4  120000  4  5  6 -1 -1  8
<6> 8  528000   2   2  132000    4  160000 -1  5  6 -1 -1 -1
<6>5 scaling frequencies supported.
<4>bio: create slab <bio-0> at 0
<6>msm_i2c_probe
<6>msm_i2c_probe: clk_ctl 35d, 100000 Hz
<4>*** GPIO_PIN requested: 60*** GPIO_PIN requested: 61*** GPIO_PIN requested: 95*** GPIO_PIN requested: 96
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
<6>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
<6>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>Switching to clocksource dg_timer
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 164K
<6>smd probe
<6>smd_core_init()
<6>smd_core_init() done
<6>smd_alloc_loopback_channel: 'local_loopback' cid=100
<3>smem_find(14, 40): wrong size 16424
<6>smem_alloc failed ch=0
<6>smd_alloc_channel() 'DS' cid=0
<3>Notify: smsm init
<3>smem_find(15, 40): wrong size 16424
<6>smem_alloc failed ch=1
<6>smd_alloc_channel() 'DIAG' cid=1
<3>_smem_log_init: no power log or log_idx allocated, smem_log disabled
<3>smem_find(16, 40): wrong size 16424
<6>smem_alloc failed ch=2
<6>smd_alloc_channel() 'RPCCALL' cid=2
<3>smem_find(21, 40): wrong size 16424
<6>smem_alloc failed ch=7
<6>smd_alloc_channel() 'DATA1' cid=7
<3>smem_find(22, 40): wrong size 16424
<6>smem_alloc failed ch=8
<6>smd_alloc_channel() 'DATA2' cid=8
<3>smem_find(23, 40): wrong size 16424
<6>smem_alloc failed ch=9
<6>smd_alloc_channel() 'DATA3' cid=9
<3>smem_find(24, 40): wrong size 16424
<6>smem_alloc failed ch=10
<6>smd_alloc_channel() 'DATA4' cid=10
<3>smem_find(25, 40): wrong size 16424
<6>smem_alloc failed ch=11
<6>smd_alloc_channel() 'DATA5' cid=11
<3>smem_find(26, 40): wrong size 16424
<6>smem_alloc failed ch=12
<6>smd_alloc_channel() 'DATA6' cid=12
<3>smem_find(27, 40): wrong size 16424
<6>smem_alloc failed ch=13
<6>smd_alloc_channel() 'DATA7' cid=13
<3>smem_find(31, 40): wrong size 16424
<6>smem_alloc failed ch=17
<6>smd_alloc_channel() 'DATA11' cid=17
<3>smem_find(52, 40): wrong size 16424
<6>smem_alloc failed ch=38
<6>smd_alloc_channel() 'DATA5_CNTL' cid=38
<3>smem_find(53, 40): wrong size 16424
<6>smem_alloc failed ch=39
<6>smd_alloc_channel() 'DATA6_CNTL' cid=39
<3>smem_find(54, 40): wrong size 16424
<6>smem_alloc failed ch=40
<6>smd_alloc_channel() 'DATA7_CNTL' cid=40
<6>SMD Packet Port Driver Initialized.
<6>SMD: ch 2 0 -> 1
<6>SMD: ch 2 1 -> 2
<6>pmem: Initializing hw3d (user-space) as non-cached
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_battery_attrs = 0
<6>[BATT] huawei_set_delta_attrs = 0
<3>rpcrouter: Server create rejected, version = 0, program = 30000012
<3>rpcrouter: Server create rejected, version = 0, program = 3000fe00
<3>rpcrouter: Server create rejected, version = 0, program = 30000066
<6>RPC_TIME_TOD_SET_APPS_BASES:
<6>	tick = 162740
<6>	stamp = 1684275268
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[BATT] huawei_get_power_down_charging_flag , ntohl32_result = 0
<6>[BATT] huawei_get_power_down_charging_flag , RPC SUCC...
<6>[BATT] charging_status_update: status=0,present=1
<6>[BATT] charging_status_update: status=32,present=1
<6>[BATT] battery_level_update: level=0,temprature=330,voltage=3932
<6>ashmem: initialized
<6>fuse init (API version 7.13)
<4>yaffs Nov 30 2011 15:58:32 Installing.
<6>msgmni has been set to 420
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>msm_fb_probe:  phy_Addr = 0x13300000 virt = 0xd0c00000
<6>MDP HW Base phy_Address = 0xaa200000 virt = 0xd0900000
<6>primary mddi base phy_addr = 0xaa600000 virt = 0xd0850000
<4>*** GPIO_PIN requested: 41*** GPIO_PIN requested: 97prim_init:3
<4>Console: switching to colour frame buffer device 60x40
<6>FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
<4>load_565rle_image: Can not open /logo.rle
<6>Registered led device: lcd-backlight
<6>msm_serial: detected port #2
<6>msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
<6>msm_serial: driver initialized
<4>Shared memory serial init
<6>msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>msm_serial_hs module loaded
<6>brd: module loaded
<6>loop: module loaded
<6>pmem: Initializing pmem_kernel_ebi1 (in-kernel)
<6>pmem: Initializing pmem_camera (user-space) as cached
<6>pmem: Initializing pmem (user-space) as cached
<6>pmem: Initializing pmem_adsp (user-space) as non-cached
<6>pmem: Initializing pmem_gpu0 (user-space) as non-cached
<6>pmem: Initializing pmem_gpu1 (user-space) as non-cached
<6>msm_nand_probe: phys addr 0xa0a00000
<6>msm_nand_probe: dmac 0x7
<6>msm_nand_probe: allocated dma buffer at ffc05000, dma_addr 1fa08000
<6>ONFI probe : Found a nonONFI Compliant device
<6>status: c00020
<6>nandid: 5500bcec maker ec device bc
<6>Found a supported NAND device
<6>NAND Id  : 0x5500bcec
<6>Buswidth : 16 Bits
<6>Density  : 512 MByte
<6>Pagesize : 2048 Bytes
<6>Erasesize: 131072 Bytes
<6>Oobsize  : 64 Bytes
<6>CFG0 Init  : 0xa85408c0
<6>CFG1 Init  : 0x0004745e
<6>ECCBUFCFG  : 0x00000203
<5>Creating 8 MTD partitions on "msm_nand":
<5>0x000002600000-0x000002b00000 : "boot"
<5>0x000002b00000-0x000003000000 : "recovery"
<5>0x000003000000-0x000003140000 : "misc"
<5>0x000003140000-0x0000031a0000 : "splash"
<5>0x0000031a0000-0x00000dba0000 : "system"
<5>0x00000dba0000-0x0000121a0000 : "cache"
<5>0x0000121a0000-0x00001ec00000 : "userdata"
<5>0x00001ec00000-0x000020000000 : "userdata2"
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright 1989 Regents of the University of California.
<4>smc91x: not found (-19).
<4>rmnet_init
<3>msm_hsusb_rpc_connect: rpc connect success vers = 10001
<6>__msm_rpc_connect: server not found 3000001a:20001
<3>msm_chg_rpc_connect: connected to rpc vers = 10001
<6>usb_probe: io=d0862000, irq=47, dma=ffc07000(1fa19000)
<6>usb_function_register: name = 'adb',  map = 1
<6>usb_function_register: name = 'mass_storage',  map = 4
<6>usb_function_register: name = 'diag',  map = 0
<6>usb_function_register: name = 'modem',  map = 2
<6>usb_function_register: name = 'nmea',  map = 3
<6>usb_set_composition: composition set to product id = 9018
<3>msm_hsusb_is_serial_num_null: rpc call success
<3>msm_hsusb_send_serial_number: rpc call success
<3>msm_hsusb_send_productID: rpc call success
<6>msm_hsusb: functions bound. starting.
<6>usb_bind_func() (diag)
<6>usb_bind_func() (adb)
<6>usb_bind_func() (modem)
<6>usb_bind_func() (nmea)
<6>usb_bind_func() (mass_storage)
<3>usb_start: pm_app_rpc connect failed
<6>usb_function_register: name = 'ethernet',  map = 5
<3>usb_function_register: unsupported function = pcui
<3>msm_hsusb_phy_reset
<6>hsusb: IDLE -> ONLINE
<6>hsusb suspend interrupt
<6>input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
<4>*** GPIO_PIN requested: 29*** GPIO_PIN requested: 35*** GPIO_PIN requested: 34*** GPIO_PIN requested: 33
<6>GPIO Matrix Keypad Driver: Start keypad matrix for surf_keypad in interrupt mode
<6>input: surf_keypad as /devices/virtual/input/input1
<4>*** GPIO_PIN requested: 36*** GPIO_PIN requested: 108*** GPIO_PIN requested: 82*** GPIO_PIN requested: 84*** GPIO_PIN requested: 85
<6>input: jogball as /devices/virtual/input/input2
<7>RTC Registering with rs30000048
<3>msm_rpc_client_req: RPC call was not successful (3)
<7>msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>msmrtc_probe: Could not initialize RPC callback
<6>using rtc device, msm_rtc, for alarms
<7>msm_rtc: dev (254:0)
<6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
<7>msm_rtc_secure: dev (254:1)
<6>rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
<6>i2c /dev entries driver
<6>hsusb reset interrupt
<6>ADP5587 keyboard driver: init
<6>hsusb resume: speed = HIGH
<3>msmsdcc_init: now wifi_chip_is_bcm is set to 0
<3>mmc0: No card detect facilities available
<6>mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
<6>mmc0: 8 bit data mode disabled
<6>mmc0: 4 bit data mode enabled
<6>mmc0: polling status mode disabled
<6>mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>mmc0: Slot eject status = 0
<6>mmc0: Power save feature enable = 1
<6>mmc0: DM non-cached buffer at ffc09000, dma_addr 0x1fa4a000
<6>mmc0: DM cmd busaddr 0x1fa4a000, cmdptr busaddr 0x1fa4a300
<3>mmc1: No card detect facilities available
<4>*** GPIO_PIN requested: 51*** GPIO_PIN requested: 52*** GPIO_PIN requested: 53*** GPIO_PIN requested: 54*** GPIO_PIN requested: 55*** GPIO_PIN requested: 56
<6>mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
<6>mmc1: 8 bit data mode disabled
<6>mmc1: 4 bit data mode enabled
<6>mmc1: polling status mode disabled
<6>mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>mmc1: Slot eject status = 0
<6>mmc1: Power save feature enable = 1
<6>mmc1: DM non-cached buffer at ffc0a000, dma_addr 0x1fa4c000
<6>mmc1: DM cmd busaddr 0x1fa4c000, cmdptr busaddr 0x1fa4c300
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>Advanced Linux Sound Architecture Driver Version 1.0.21.
<6>ALSA device list:
<6>  No soundcards found.
<4>nf_conntrack version 0.5.0 (3362 buckets, 13448 max)
<6>IPv4 over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>clock_late_init() disabled 17 unused clocks
<6>input: 7k_handset as /devices/virtual/input/input3
<7>msmrtc_tod_proc_result: 12/05/2011 14:27:05 (00)
<6>rs30000048 rs30000048.65536: setting system clock to 2011-12-05 14:27:05 UTC (1323095225)
<6>Freeing init memory: 152K
<3>init: /init.rc: 313: ignored duplicate definition of service 'flash_recovery'
<6>hsusb set_configuration wValue = 1 usbcmd = 1
<6>usb_mass_storage usb_mass_storage: config #1
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new high speed SDHC card at address 1234
<6>mmcblk0: mmc0:1234 SA08G 7.41 GiB
<6> mmcblk0: p1 p2
<4>*** GPIO_PIN requested: 62*** GPIO_PIN requested: 63*** GPIO_PIN requested: 64*** GPIO_PIN requested: 65*** GPIO_PIN requested: 66*** GPIO_PIN requested: 67
<3>init: /init.qcom.rc: 68: invalid command 'chgrp'
<3>init: /init.qcom.rc: 88: ignored duplicate definition of service 'hfag'
<4>*** GPIO_PIN requested: 62*** GPIO_PIN requested: 63*** GPIO_PIN requested: 64*** GPIO_PIN requested: 65*** GPIO_PIN requested: 66*** GPIO_PIN requested: 67
<3>init: /init.qcom.rc: 89: ignored duplicate definition of service 'hsag'
<3>init: /init.qcom.rc: 90: ignored duplicate definition of service 'opush'
<3>init: /init.qcom.rc: 91: ignored duplicate definition of service 'pbap'
<3>msm_chg_usb_charger_connected
<3>msm_chg_usb_i_is_available(500)
<6>
<6>usb_chg_legacy_detect: Standard Downstream Port
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<6>[BATT] battery_level_update: level=0,temprature=330,voltage=3932
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>yaffs: dev is 32505862 name is "mtdblock6"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.6, "mtdblock6"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 0
<6>yaffs: dev is 32505861 name is "mtdblock5"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>yaffs: dev is 32505863 name is "mtdblock7"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.7, "mtdblock7"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<4>set_polling: no need to enable polling for slot 2
<4>*** GPIO_PIN requested: 62*** GPIO_PIN requested: 63*** GPIO_PIN requested: 64*** GPIO_PIN requested: 65*** GPIO_PIN requested: 66*** GPIO_PIN requested: 67
<6>enabling adb function
<6>usb_function_enable: name = adb, enable = 1
<3>usb_function_enable: function (adb) state is same
<4>*** GPIO_PIN requested: 62*** GPIO_PIN requested: 63*** GPIO_PIN requested: 64*** GPIO_PIN requested: 65*** GPIO_PIN requested: 66*** GPIO_PIN requested: 67
<6>[BATT] charging_status_update: status=17,present=1
<4>EXT2-fs: mmcblk0p2: couldn't mount because of unsupported optional features (4).
<6>yaffs: dev is 187695106 name is "mmcblk0p2"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 179.2, "mmcblk0p2"
<6>yaffs: dev is 187695106 name is "mmcblk0p2"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 179.2, "mmcblk0p2"
<6>[BATT] battery_level_update: level=77,temprature=330,voltage=3932
<3>init: service 'console' requires console
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>init: cannot find '/system/bin/flash_image', disabling 'flash_recovery'
<6>SMD: ch 38 0 -> 1
<6>SMD: ch 38 1 -> 2
<6>SMD: ch 39 0 -> 1
<6>SMD: ch 39 1 -> 2
<6>SMD: ch 40 0 -> 1
<6>SMD: ch 40 1 -> 2
<3>init: untracked pid 1090 exited
<3>init: untracked pid 1095 exited
<6>[BATT] charging_status_update: status=20,present=1
<6>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
<6>CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
<3>init: untracked pid 1108 exited
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<3>init: untracked pid 1116 exited
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>request_suspend_state: wakeup (0)(3->0) at 31351360078 (2011-12-05 14:27:35.304881693 UTC)
<6>rmnet_open()
<6>SMD: ch 11 0 -> 1
<6>SMD: ch 11 1 -> 2