API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 4th, 2025
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.53 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.30-gentoo-x86_64] (local build)
  2. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Blue (CMR)
  6. Device Model: WDC WD80EAAZ-00BXBB0
  7. Serial Number: WD-RD02V0WE
  8. LU WWN Device Id: 5 0014ee 26b6c2f5c
  9. Firmware Version: 01.01A01
  10. User Capacity: 8 001 563 222 016 bytes [8,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5640 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database 7.3/5671
  15. ATA Version is: ACS-3 T13/2161-D revision 5
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is: Sun May 4 19:53:59 2025 MSK
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART Status not supported: Incomplete response, ATA output registers missing
  23. SMART overall-health self-assessment test result: PASSED
  24. Warning: This result is based on an Attribute check.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: (12944) seconds.
  35. Offline data collection
  36. capabilities: (0x7b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 805) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 5) minutes.
  55. SCT capabilities: (0x0031) SCT Status supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 16
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  63. 3 Spin_Up_Time 0x0027 213 189 021 Pre-fail Always - 6341
  64. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 262
  65. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  66. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  67. 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 886
  68. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  69. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 259
  71. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 58
  72. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2054
  73. 194 Temperature_Celsius 0x0022 119 100 000 Old_age Always - 33
  74. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  75. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  76. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 18
  78. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 644 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 644 occurred at disk power-on lifetime: 884 hours (36 days + 20 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 04 61 20 00 00 00 e0 Device Fault; Error: ABRT 32 sectors at LBA = 0x00000000 = 0
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. c8 00 20 00 00 00 e0 08 00:00:56.688 READ DMA
  108. ec 00 00 00 00 00 a0 08 00:00:56.685 IDENTIFY DEVICE
  109. ef 03 42 00 00 00 a0 08 00:00:56.685 SET FEATURES [Set transfer mode]
  110. ec 00 00 00 00 00 a0 08 00:00:56.643 IDENTIFY DEVICE
  111. c8 00 20 00 00 00 e0 08 00:00:56.617 READ DMA
  112.  
  113. Error 643 occurred at disk power-on lifetime: 884 hours (36 days + 20 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 04 61 20 00 00 00 e0 Device Fault; Error: ABRT 32 sectors at LBA = 0x00000000 = 0
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. c8 00 20 00 00 00 e0 08 00:00:56.617 READ DMA
  125. ec 00 00 00 00 00 a0 08 00:00:56.612 IDENTIFY DEVICE
  126. ef 03 42 00 00 00 a0 08 00:00:56.612 SET FEATURES [Set transfer mode]
  127. ec 00 00 00 00 00 a0 08 00:00:56.554 IDENTIFY DEVICE
  128. c8 00 20 00 00 00 e0 08 00:00:56.529 READ DMA
  129.  
  130. Error 642 occurred at disk power-on lifetime: 884 hours (36 days + 20 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 04 61 20 00 00 00 e0 Device Fault; Error: ABRT 32 sectors at LBA = 0x00000000 = 0
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. c8 00 20 00 00 00 e0 08 00:00:56.529 READ DMA
  142. ec 00 00 00 00 00 a0 08 00:00:56.526 IDENTIFY DEVICE
  143. ef 03 42 00 00 00 a0 08 00:00:56.526 SET FEATURES [Set transfer mode]
  144. ec 00 00 00 00 00 a0 08 00:00:56.484 IDENTIFY DEVICE
  145. c8 00 20 00 00 00 e0 08 00:00:56.459 READ DMA
  146.  
  147. Error 641 occurred at disk power-on lifetime: 884 hours (36 days + 20 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 04 61 20 00 00 00 e0 Device Fault; Error: ABRT 32 sectors at LBA = 0x00000000 = 0
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. c8 00 20 00 00 00 e0 08 00:00:56.459 READ DMA
  159. ec 00 00 00 00 00 a0 08 00:00:56.456 IDENTIFY DEVICE
  160. ef 03 42 00 00 00 a0 08 00:00:56.456 SET FEATURES [Set transfer mode]
  161. ec 00 00 00 00 00 a0 08 00:00:56.417 IDENTIFY DEVICE
  162. c8 00 20 00 00 00 e0 08 00:00:56.392 READ DMA
  163.  
  164. Error 640 occurred at disk power-on lifetime: 884 hours (36 days + 20 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 04 61 20 00 00 00 e0 Device Fault; Error: ABRT 32 sectors at LBA = 0x00000000 = 0
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. c8 00 20 00 00 00 e0 08 00:00:56.392 READ DMA
  176. ec 00 00 00 00 00 a0 08 00:00:56.389 IDENTIFY DEVICE
  177. ef 03 42 00 00 00 a0 08 00:00:56.389 SET FEATURES [Set transfer mode]
  178. ec 00 00 00 00 00 a0 08 00:00:56.350 IDENTIFY DEVICE
  179. c8 00 20 00 00 00 e0 08 00:00:56.325 READ DMA
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
  194.  
  195. The above only provides legacy SMART information - try 'smartctl -x' for more
  196.  
  197.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!