Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
- <6>[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
- <5>[ 0.000000] [0: swapper: 0] Linux version 3.0.101-Cyberkernel_V5-g8f9ec17 (chris@chris-Precision-WorkStation-690) (gcc version 4.8.5 (UBERTC-4.8.5) ) #1 SMP PREEMPT Mon Oct 12 21:22:55 EDT 2015
- <4>[ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
- <4>[ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- <4>[ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
- <6>[ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
- <6>[ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
- <6>[ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized
- <4>[ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
- <6>[ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
- <6>[ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
- <7>[ 0.000000] [0: swapper: 0] On node 0 totalpages: 211200
- <7>[ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c0cefa00, node_mem_map c14b8000
- <7>[ 0.000000] [0: swapper: 0] Normal zone: 992 pages used for memmap
- <7>[ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
- <7>[ 0.000000] [0: swapper: 0] Normal zone: 105248 pages, LIFO batch:31
- <7>[ 0.000000] [0: swapper: 0] HighMem zone: 1048 pages used for memmap
- <7>[ 0.000000] [0: swapper: 0] HighMem zone: 103912 pages, LIFO batch:31
- <6>[ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c1cba000 (420ba000 physical) for fb
- <6>[ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c290c000 s12256 r8192 d12320 u32768
- <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: s12256 r8192 d12320 u32768 alloc=8*4096
- <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160
- <5>[ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true androidboot.selinux=permissive sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=249658fb androidboot.baseband=csfb
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup)
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
- <4>[ 0.000000] hw_rev_setup : HW rev value is intialized first
- <4>[ 0.000000] HW rev value : 0xD
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 43MB 760MB 22MB = 825MB total
- <5>[ 0.000000] Memory: 802748k/802748k available, 158788k reserved, 419840K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
- <5>[ 0.000000] .text : 0xc0100000 - 0xc0b76d34 (10716 kB)
- <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cf24e8 ( 970 kB)
- <5>[ 0.000000] .bss : 0xc0cf250c - 0xc134db08 (6510 kB)
- <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:855
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)
- <6>[ 0.150207] pid_max: default: 32768 minimum: 301
- <6>[ 0.150573] Security Framework initialized
- <6>[ 0.150604] SELinux: Initializing.
- <7>[ 0.150665] SELinux: Starting in permissive mode
- <6>[ 0.150878] Mount-cache hash table entries: 512
- <6>[ 0.152282] Initializing cgroup subsys cpuacct
- <6>[ 0.152404] Initializing cgroup subsys freezer
- <6>[ 0.152465] CPU: Testing write buffer coherency: ok
- <6>[ 0.152832] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
- <4>[ 0.185424] CPU1: Booted secondary processor
- <6>[ 0.195312] Brought up 2 CPUs
- <6>[ 0.195312] SMP: Total of 2 processors activated (27.06 BogoMIPS).
- <6>[ 0.210693] print_constraints: dummy:
- <3>[ 0.210815] rdev_init_debugfs: Error-Bad Function Input
- <6>[ 0.211151] NET: Registered protocol family 16
- <3>[ 0.211364] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <6>[ 0.213439] (sec_get_lpm_mode) 1a2b3c00
- <0>[ 0.213439] (sec_get_lpm_mode) 0
- <0>[ 0.213470] (sec_debug_init)
- <0>[ 0.213470] (sec_debug_init) reset_reason : 0x1a2b3c00
- <6>[ 0.213500] msm_rpm_init: RPM firmware 2.0.1115
- <6>[ 0.214263] saw_probe: id=0, name=8901_s0
- <6>[ 0.214721] saw_probe: id=1, name=8901_s1
- <6>[ 0.216339] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
- <6>[ 0.216369] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
- <6>[ 0.216400] rcg_clk_handoff: sdc1_clk rate=48000000
- <6>[ 0.216461] rcg_clk_handoff: dsi_byte_clk rate=1
- <6>[ 0.216522] rcg_clk_handoff: mdp_clk rate=200000000
- <6>[ 0.216644] rcg_clk_handoff: pixel_mdp_clk rate=27400000
- <6>[ 0.218688] Max ACPU freq: 1944000 KHz
- <6>[ 0.241699] CPU0: 31 scaling frequencies supported.
- <6>[ 0.241729] CPU1: 31 scaling frequencies supported.
- <3>[ 0.242248] LTE_switch_init!
- <3>[ 0.242309] LTE_switch_init end!
- <6>[ 0.243804] pm8058_probe: PMIC revision: E3
- <6>[ 0.245147] pm_gpio_probe: OK: base=173, ngpio=40
- <6>[ 0.245391] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- <6>[ 0.246734] pm8901_probe: PMIC REVISION = F4
- <6>[ 0.247192] pm8xxx_mpp_probe: OK: base=225, ngpio=4
- <6>[ 0.261993] ram_console: got buffer at 77800000, size 100000
- <6>[ 0.262084] ram_console: found existing buffer, size 391038, start 391038
- <6>[ 1.410644] console [ram-1] enabled
- <3>[ 1.412231] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
- <3>[ 1.412902] msm_snddev_init
- <3>[ 1.413391] msm_snddev_init snd_devices_celox - config
- <4>[ 1.423828] [TSP] Power Down S to discharge for unexpected leackage current
- <4>[ 1.424377] [TKEY] tkey_device_init: 8901_lvs2 On
- <4>[ 1.424987] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
- <4>[ 1.425079] brcm_wlan_init: start
- <4>[ 1.425201] brcm_init_wlan_mem: WIFI MEM Allocated
- <6>[ 1.444580] bio: create slab <bio-0> at 0
- <6>[ 1.446014] ION heap vmalloc created
- <6>[ 1.446136] ION heap mm created at 38800000 with size 3600000
- <6>[ 1.446319] ION heap mm_fw created at 38600000 with size 200000
- <6>[ 1.446441] ION heap mfc created at 3be00000 with size 2000
- <6>[ 1.446594] ION heap sf created at 78f00000 with size 4000000
- <6>[ 1.446716] ION heap camera_preview created at 7cf00000 with size 1200000
- <6>[ 1.446899] ION heap wb created at 7e100000 with size 1400000
- <6>[ 1.447052] ION heap qsecom created at 7f500000 with size 600000
- <6>[ 1.447174] ION heap audio created at 7fb00000 with size 4cf000
- <5>[ 1.447509] pmic8058_pwm_probe: OK
- <5>[ 1.448181] SCSI subsystem initialized
- <6>[ 1.448455] usbcore: registered new interface driver usbfs
- <6>[ 1.448638] usbcore: registered new interface driver hub
- <6>[ 1.448852] usbcore: registered new device driver usb
- <6>[ 1.449401] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
- <6>[ 1.449645] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
- <6>[ 1.449981] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
- <6>[ 1.450195] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
- <6>[ 1.450592] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
- <6>[ 1.450866] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
- <6>[ 1.451171] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
- <6>[ 1.451538] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 1.452148] Bluetooth: Core ver 2.16
- <6>[ 1.452270] NET: Registered protocol family 31
- <6>[ 1.452392] Bluetooth: HCI device and connection manager initialized
- <6>[ 1.452484] Bluetooth: HCI socket layer initialized
- <6>[ 1.452636] Bluetooth: L2CAP socket layer initialized
- <6>[ 1.452880] Bluetooth: SCO socket layer initialized
- <6>[ 1.453491] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 1.453765] Switching to clocksource gp_timer
- <6>[ 1.472747] NET: Registered protocol family 2
- <6>[ 1.472961] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 1.473388] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 1.474304] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
- <6>[ 1.475372] TCP: Hash tables configured (established 65536 bind 65536)
- <6>[ 1.475433] TCP reno registered
- <6>[ 1.475585] UDP hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 1.475677] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 1.476257] NET: Registered protocol family 1
- <6>[ 1.476623] RPC: Registered named UNIX socket transport module.
- <6>[ 1.476776] RPC: Registered udp transport module.
- <6>[ 1.476837] RPC: Registered tcp transport module.
- <6>[ 1.476928] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 1.477264] Trying to unpack rootfs image as initramfs...
- <6>[ 1.508636] Freeing initrd memory: 732K
- <6>[ 1.509033] PMU: registered new PMU device of type 0
- <6>[ 1.509307] PMU: registered new PMU device of type 1
- <6>[ 1.509857] ETM/ETB intialized.
- <6>[ 1.510070] pil_qdsp6v3 pil_qdsp6v3: using secure boot
- <6>[ 1.510589] pil_modem pil_modem: using secure boot
- <6>[ 1.510894] sdio_al:SDIO-AL SW version 1.30
- <3>[ 1.513885] smd_channel_probe_worker: allocation table not initialized
- <6>[ 1.520141] msm_dsps driver version 3.03.
- <6>[ 1.526214] lpa_if_init: lpa_if_ptr 0xde191000 buf_vir 0xffdf0000 buf_phy 0x5ef80000 buf_zise 65536
- <6>[ 1.527130] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
- <3>[ 1.528747] sec_switch_probe enter sec_switch_probe
- <6>[ 1.529571] charm_modem_probe: Registering charm modem
- <5>[ 1.531951] msm_rpm_log_probe: OK
- <3>[ 1.532165] [BT] bcm4330_bluetooth_init
- <3>[ 1.532653] [BT] bcm4330_bluetooth_probe
- <3>[ 1.533111] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
- <3>[ 1.533172] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
- <6>[ 1.582885] sec_log_save_old: saved old log at 262144@debc0000
- <6>[ 1.587249] sec_getlog_supply_kloginfo: 0xc112a5f8
- <6>[ 1.587524] audit: initializing netlink socket (disabled)
- <5>[ 1.587707] type=2000 audit(1.560:1): initialized
- <4>[ 1.673828] highmem bounce pool size: 64 pages
- <6>[ 1.674102] ashmem: initialized
- <6>[ 1.681549] fuse init (API version 7.16)
- <6>[ 1.682250] msgmni has been set to 749
- <7>[ 1.682373] SELinux: Registering netfilter hooks
- <6>[ 1.684143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 1.684356] io scheduler cfq registered
- <6>[ 1.684478] io scheduler deadline registered (default)
- <6>[ 1.684570] io scheduler fifo registered
- <6>[ 1.684722] io scheduler noop registered
- <6>[ 1.684814] io scheduler row registered
- <6>[ 1.684906] io scheduler sio registered
- <6>[ 1.685089] io scheduler tripndroid registered
- <6>[ 1.685180] io scheduler vr registered
- <6>[ 1.685272] io scheduler zen registered
- <4>[ 1.687805] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 1.687927] mdp4_csc_config: Block type 8 isn't supported by CSC.
- <4>[ 1.692108] ld9040 start lcdc_ld9040_panel_init
- <4>[ 1.692291] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
- <4>[ 1.692474] ld9040 msm_fb_add_device START
- <6>[ 1.692565] setting pdata->panel_info.fb_num to 3. type: 0
- <3>[ 1.692718] msm_fb_add_device: msm_fb_device_alloc failed!
- <4>[ 1.692810] ld9040 msm_fb_add_device end
- <4>[ 1.693298] ld9040 platform_driver_register(&this_driver) is done
- <4>[ 1.693481] ld9040 LDI : EA8868, pixelclock 27400000
- <6>[ 1.693878] setting pdata->panel_info.fb_num to 3. type: 3
- <6>[ 1.696868] mdp4_lcdc_vsync_init: ndx=0
- <6>[ 1.699127] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
- <6>[ 1.699310] is_lpcharging_state: is_lpm_boot:0
- <3>[ 1.699401] pm_runtime: fail to wake up
- <4>[ 1.699584] [kmj] lcdc_LD9040_panel_power:enable:1
- <4>[ 1.700775] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- <4>[ 1.700866] ld9040 : lcdc_config_gpios [1]
- <4>[ 1.701049] ld9040 start spi_init
- <4>[ 1.701141] ld9040 clk : 103, cs : 104, sdi : 106
- <4>[ 1.701293] ld9040 start ld9040_disp_powerup
- <4>[ 1.754486] ld9040 start ld9040_disp_on - HW Rev: 13
- <4>[ 1.884796] ld9040 ld9040_read_lcd_id: a1 3 22
- <4>[ 1.884948] ld9040 lcd EA8868 M3
- <4>[ 1.948394] ld9040 ACL_cutoff_set Percentage : 40!!
- <4>[ 1.949829] ld9040 ea8868_gamma_ctl 18 18
- <4>[ 1.950073] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- <4>[ 1.951599] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 1.951751] mdp4_csc_config: Block type 8 isn't supported by CSC.
- <4>[ 1.954956] load_565rle_image: Can not open /initlogo.rle
- <7>[ 1.955474] Registered led device: lcd-backlight
- <6>[ 1.955596] mdp4_lcdc_vsync_init: ndx=0
- <6>[ 1.955780] sec_getlog_supply_fbinfo: 0x420ba000 480 800 32 2
- <4>[ 1.955902] ld9040 platform_device_register(&this_device) is done
- <6>[ 1.956481] hdmi_msm hdmi_msm.0: probe
- <6>[ 1.957092] hdmi_msm hdmi_msm.1: probe
- <6>[ 1.957214] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
- <6>[ 1.957519] setting pdata->panel_info.fb_num to 1. type: 7
- <6>[ 1.958312] mdp4_dtv_vsync_init: ndx=0
- <6>[ 1.960510] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
- <6>[ 1.960906] mdp4_dtv_vsync_init: ndx=0
- <6>[ 1.961181] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de349008
- <6>[ 1.961303] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
- <6>[ 1.961486] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <7>[ 1.961822] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
- <6>[ 1.962951]
- <6>[ 1.962951] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 1.963378]
- <6>[ 1.963378] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 1.963653] is_lpcharging_state: is_lpm_boot:0
- <6>[ 1.963989] mhl_v2, Board : get_mhl_int_irq, rev:13
- <6>[ 1.964324] create mhl sysfile
- <6>[ 1.964782] input: sii9234_rcp as /devices/virtual/input/input0
- <6>[ 1.965637] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- <6>[ 1.966125] msm_serial_hs module loaded
- <3>[ 1.966247] [BT] bcm_bt_lpm_init: E
- <3>[ 1.966461] [BT] bcm_bt_lpm_probe: success
- <6>[ 1.966857] msm_serial_hsl: detected port #1
- <6>[ 1.967041] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
- <6>[ 1.967376] msm_serial_hsl: detected port #0
- <6>[ 1.967559] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- <6>[ 1.968017] msm_serial_hsl: driver initialized
- <6>[ 1.969055] msm_rotator_probe: rotator_hw_revision=1
- <6>[ 1.974975] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 1.976409] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 1.977539] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 1.983001] brd: module loaded
- <6>[ 1.985534] loop: module loaded
- <6>[ 1.985961] is_lpcharging_state: is_lpm_boot:0
- <4>[ 1.986114] ak8975 probe start!
- <4>[ 1.987335] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- <4>[ 1.988281] ak8975 probe success!
- <6>[ 1.988494] is_lpcharging_state: is_lpm_boot:0
- <4>[ 1.988616] k3dh probe start!!
- <4>[ 1.988739] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- <4>[ 1.989135] k3dh probe success!!
- <6>[ 1.989410] sec_jack:sec_jack_probe : Registering jack driver
- <6>[ 1.989715] input: sec_jack as /devices/virtual/input/input1
- <5>[ 1.990661] pm8xxx_upl_probe: OK
- <3>[ 1.991729] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
- <4>[ 1.992126] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
- <4>[ 1.992584] THNAK YOU!!
- <6>[ 1.992736] vibrator I2C attach success!!!
- <4>[ 1.992889] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
- <4>[ 2.006469] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
- <6>[ 2.007476] is_lpcharging_state: is_lpm_boot:0
- <6>[ 2.007629] a2220_init
- <4>[ 2.007904] i2c-core: driver [audience_a2220] using legacy suspend method
- <4>[ 2.008026] i2c-core: driver [audience_a2220] using legacy resume method
- <4>[ 2.008331] level device init
- <4>[ 2.013458] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
- <4>[ 2.013641] audience_a2220 :a2220_ioctl: creating thread..
- <4>[ 2.013854] init_a2220 -
- <4>[ 2.013854] audience_a2220 :a2220_init_thread
- <6>[ 2.014038] adie_codec_register_codec_operations: codec type 1
- <6>[ 2.014678] Loading pn544 driver
- <6>[ 2.014892] pn544_probe : IRQ num 628
- <6>[ 2.015106] pn544_probe : requesting IRQ 628
- <6>[ 2.015838] SCSI Media Changer driver v0.25
- <6>[ 2.016387] PPP generic driver version 2.4.2
- <6>[ 2.016632] PPP Deflate Compression module registered
- <6>[ 2.016784] PPP BSD Compression module registered
- <6>[ 2.017456] PPP MPPE Compression module registered
- <6>[ 2.017578] NET: Registered protocol family 24
- <6>[ 2.017730] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 2.017913] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 2.018402] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 2.018585] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 2.019409] smsc911x: Driver version 2008-10-21
- <6>[ 2.019805] usbcore: registered new interface driver asix
- <6>[ 2.019927] usbcore: registered new interface driver cdc_ether
- <6>[ 2.020141] usbcore: registered new interface driver net1080
- <6>[ 2.020294] usbcore: registered new interface driver cdc_subset
- <6>[ 2.020477] usbcore: registered new interface driver zaurus
- <6>[ 2.020599] cdc_ncm: 04-Aug-2011
- <6>[ 2.020721] usbcore: registered new interface driver cdc_ncm
- <6>[ 2.020904] rmnet_init: SMD devices[8]
- <6>[ 2.025177] rmnet_init: SDIO devices[8]
- <3>[ 2.027832] msm_hsusb_smb328a_vbus_power attached 0
- <6>[ 2.029907] msm_otg msm_otg: success to host_notify_dev_register
- <6>[ 2.030273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 2.030639] host driver registered w/ tranceiver
- <6>[ 2.031005] usbcore: registered new interface driver cdc_acm
- <6>[ 2.031097] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 2.031341] usbcore: registered new interface driver usblp
- <6>[ 2.031433] Initializing USB Mass Storage driver...
- <6>[ 2.031646] usbcore: registered new interface driver usb-storage
- <6>[ 2.031738] USB Mass Storage support registered.
- <6>[ 2.031951] usbcore: registered new interface driver ums-alauda
- <6>[ 2.032104] usbcore: registered new interface driver ums-cypress
- <6>[ 2.032287] usbcore: registered new interface driver ums-datafab
- <6>[ 2.032440] usbcore: registered new interface driver ums-freecom
- <6>[ 2.032623] usbcore: registered new interface driver ums-isd200
- <6>[ 2.032775] usbcore: registered new interface driver ums-jumpshot
- <6>[ 2.032989] usbcore: registered new interface driver ums-karma
- <6>[ 2.033142] usbcore: registered new interface driver ums-onetouch
- <6>[ 2.033325] usbcore: registered new interface driver ums-sddr09
- <6>[ 2.033477] usbcore: registered new interface driver ums-sddr55
- <6>[ 2.033691] usbcore: registered new interface driver ums-usbat
- <6>[ 2.033813] usbcore: registered new interface driver usb_ehset_test
- <6>[ 2.034301] peripheral driver registered w/ tranceiver
- <4>[ 2.034423] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
- <6>[ 2.036682] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 2.036865] android_usb gadget: Number of LUNs=2
- <6>[ 2.036987] lun0: LUN: removable file: (no medium)
- <6>[ 2.037078] lun1: LUN: removable file: (no medium)
- <6>[ 2.037445] android_usb gadget: android_usb ready
- <6>[ 2.039215] DIAG registered SDIO device
- <6>[ 2.039520] diagchar initialized now
- <6>[ 2.039855] mousedev: PS/2 mouse device common for all mice
- <6>[ 2.041351] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
- <6>[ 2.042022] is_lpcharging_state: is_lpm_boot:0
- <3>[ 2.042205] [TSP] mxt224_probe
- <6>[ 2.042449] input: sec_touchscreen as /devices/virtual/input/input3
- <4>[ 2.042663] mxt224_power_on: enter
- <3>[ 2.043243] [TSP POWER ON L1 3.3 enable
- <3>[ 2.043731] [TSP POWER ON L4 1.8 enable
- <4>[ 2.043823] mxt224_power_on: exit
- <4>[ 2.094238] mxt224_power_on is finished
- <4>[ 2.114044] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
- <6>[ 2.135589] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
- <3>[ 2.135681] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
- <3>[ 2.160156] [TSP] TSP chip is MXT224-E
- <3>[ 2.160827] [TSP]user_info_value is 0
- <4>[ 2.174316] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
- <4>[ 2.174560] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
- <4>[ 2.175811] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
- <4>[ 2.175903] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
- <6>[ 2.176086] a2220_bootup_init: starting to load image (2459 passes)...
- <3>[ 2.254272] [TSP] ta_status is 0
- <3>[ 2.254394] [TSP] mxt224_ta_probe
- <3>[ 2.262969] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <4>[ 2.264343] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
- <6>[ 2.264434] [OTG] msm_otg_start_peripheral, on = 1
- <3>[ 2.265441] [TSP]calibration success!!!
- <3>[ 2.266021] [TSP] mxt224_probe e
- <6>[ 2.266510] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
- <6>[ 2.266784] [sweep2wake]: set device pmic8xxx_pwrkey
- <3>[ 2.267150] [TSP] Calibration End!!!!!!
- <3>[ 2.267333] [TSP] Clearing unused slots
- <6>[ 2.269012] using rtc device, pm8xxx_rtc, for alarms
- <6>[ 2.269134] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- <6>[ 2.269714] i2c /dev entries driver
- <3>[ 2.270416] [TSP] Calibration End!!!!!!
- <3>[ 2.270599] [TSP] Clearing unused slots
- <6>[ 2.271606] is_lpcharging_state: is_lpm_boot:0
- <6>[ 2.271697] yda165:yda165_init
- <6>[ 2.271911] yda165:yda165_probe
- <3>[ 2.272003] yda165:yda165_probe
- <5>[ 2.272094] yda165_probe: OK
- <6>[ 2.272369] yda165:load_ampgain completed
- <6>[ 2.272552] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.272857] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 2.273193] input: proximity_sensor as /devices/virtual/input/input5
- <4>[ 2.273437] opt_i2c_probe(839):
- <3>[ 2.273559] opt_i2c_probe, 840 : start!!!
- <4>[ 2.273651] GP2A opt i2c attach success!!!
- <3>[ 2.273742] GP2A opt i2c attach success!!!
- <3>[ 2.273895] opt_i2c_probe, 859 : end!!!
- <4>[ 2.274047] opt_i2c_client : (0xdea8bc00)
- <4>[ 2.274719] opt_i2c_write(497): : 0x4, 0x2
- <4>[ 2.274810] gp2a_opt_probe is OK!!
- <6>[ 2.275421] is_lpcharging_state: is_lpm_boot:0
- <6>[ 2.276458] input: light_sensor as /devices/virtual/input/input6
- <6>[ 2.277038] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
- <6>[ 2.279876] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
- <4>[ 2.280090] i2c-core: driver [fsa9480] using legacy resume method
- <6>[ 2.280303] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.280456] [GYRO] k3g_probe start!
- <4>[ 2.280548] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 2.281158] input: gyro_sensor as /devices/virtual/input/input8
- <6>[ 2.282501] input: orientation_sensor as /devices/virtual/input/input9
- <6>[ 2.282867] lirc_dev: IR Remote Control driver registered, major 239
- <6>[ 2.283020] IR NEC protocol handler initialized
- <6>[ 2.283142] IR RC5(x) protocol handler initialized
- <6>[ 2.283294] IR RC6 protocol handler initialized
- <6>[ 2.283386] IR JVC protocol handler initialized
- <6>[ 2.283477] IR Sony protocol handler initialized
- <6>[ 2.283660] IR RC5 (streamzap) protocol handler initialized
- <6>[ 2.283752] IR LIRC bridge handler initialized
- <6>[ 2.283905] Linux video capture interface: v2.00
- <6>[ 2.284088] usbcore: registered new interface driver uvcvideo
- <6>[ 2.284332] USB Video Class driver (v1.1.0)
- <6>[ 2.285278] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.285522] ############# M5MO probe ##############
- <7>[ 2.285797] [M5MO] m5mo_sensor_probe : E
- <7>[ 2.285888] [M5MO] m5mo_i2c_init : E
- <7>[ 2.286010] [M5MO] m5mo_i2c_probe : E
- <7>[ 2.286163] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
- <7>[ 2.286193]
- <6>[ 2.287170] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.287536] ############# S5K5BAFX probe ##############
- <7>[ 2.288024] [5BAFX] s5k5bafx_sensor_probe : E
- <7>[ 2.288146] [5BAFX] s5k5bafx_i2c_init : E
- <7>[ 2.288391] [5BAFX] s5k5bafx_i2c_probe : E
- <7>[ 2.288482] [5BAFX] s5k5bafx_i2c_probe : X
- <3>[ 2.288726] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
- <4>[ 2.289672] [Torch] ledflash_init
- <6>[ 2.289947] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- <6>[ 2.290527] max17040_probe: MAX17043 driver Loading!
- <6>[ 2.290649] max17040_get_version :
- <6>[ 2.291625] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
- <6>[ 2.292510] max17040_get_rcomp : current rcomp = 0xc71f(199)
- <6>[ 2.293945] max17040_get_rcomp : current rcomp = 0xc71f(199)
- <4>[ 2.297668] i2c-core: driver [max17040] using legacy suspend method
- <4>[ 2.297851] i2c-core: driver [max17040] using legacy resume method
- <6>[ 2.298004] smb328a_probe: SMB328A driver Loading!
- <6>[ 2.298187] is_lpcharging_state: is_lpm_boot:0
- <6>[ 2.299468] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
- <6>[ 2.301177] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
- <4>[ 2.301788] i2c-core: driver [smb328a] using legacy suspend method
- <4>[ 2.301971] i2c-core: driver [smb328a] using legacy resume method
- <6>[ 2.302581] msm_adc successfully registered
- <6>[ 2.302947] tsens_tm_init : TSENS early init not done.
- <6>[ 2.303375] device-mapper: uevent: version 1.0.3
- <6>[ 2.303771] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 2.304046] Bluetooth: HCI UART driver ver 2.2
- <6>[ 2.304199] Bluetooth: HCI H4 protocol initialized
- <6>[ 2.304321] Bluetooth: HCI_IBS protocol initialized
- <3>[ 2.305389] [TSP] Calibration!!!!!!
- <6>[ 2.305480] cpuidle: using governor ladder
- <6>[ 2.305572] cpuidle: using governor menu
- <6>[ 2.306030] mmc0: mci-version: 0
- <3>[ 2.306213] mmc0: No card detect facilities available
- <6>[ 2.306732] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- <6>[ 2.306945] mmc0: 8 bit data mode enabled
- <6>[ 2.307037] mmc0: 4 bit data mode disabled
- <6>[ 2.307189] mmc0: polling status mode disabled
- <6>[ 2.307342] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 2.307800] mmc0: Slot eject status = 0
- <6>[ 2.307891] mmc0: Power save feature enable = 1
- <6>[ 2.308044] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d8e0000
- <6>[ 2.308258] mmc0: DM cmd busaddr 0x5d8e0000, cmdptr busaddr 0x5d8f7f40
- <6>[ 2.308776] mmc1: mci-version: 0
- <6>[ 2.309448] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
- <6>[ 2.309631] mmc1: 8 bit data mode enabled
- <6>[ 2.309722] mmc1: 4 bit data mode disabled
- <6>[ 2.309814] mmc1: polling status mode disabled
- <6>[ 2.309967] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 2.310119] mmc1: Slot eject status = 0
- <6>[ 2.310302] mmc1: Power save feature enable = 1
- <6>[ 2.310394] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d900000
- <6>[ 2.310516] mmc1: DM cmd busaddr 0x5d900000, cmdptr busaddr 0x5d917f40
- <6>[ 2.310943] mmc2: mci-version: 0
- <6>[ 2.311614] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
- <6>[ 2.311798] mmc2: 8 bit data mode disabled
- <6>[ 2.311889] mmc2: 4 bit data mode enabled
- <6>[ 2.312133] mmc2: polling status mode disabled
- <6>[ 2.312225] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 2.312408] mmc2: Slot eject status = 1
- <6>[ 2.312500] mmc2: Power save feature enable = 1
- <6>[ 2.312591] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d920000
- <6>[ 2.312774] mmc2: DM cmd busaddr 0x5d920000, cmdptr busaddr 0x5d937f40
- <6>[ 2.313262] mmc3: mci-version: 0
- <3>[ 2.313446] mmc3: No card detect facilities available
- <6>[ 2.313751] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
- <6>[ 2.313995] mmc3: 8 bit data mode disabled
- <6>[ 2.314086] mmc3: 4 bit data mode enabled
- <6>[ 2.314270] mmc3: polling status mode disabled
- <6>[ 2.314392] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 2.314575] mmc3: Slot eject status = 0
- <6>[ 2.314666] mmc3: Power save feature enable = 1
- <6>[ 2.314758] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d940000
- <6>[ 2.314971] mmc3: DM cmd busaddr 0x5d940000, cmdptr busaddr 0x5d957f40
- <6>[ 2.315429] mmc4: mci-version: 0
- <6>[ 2.315979] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
- <6>[ 2.316192] mmc4: 8 bit data mode disabled
- <6>[ 2.316284] mmc4: 4 bit data mode enabled
- <6>[ 2.316375] mmc4: polling status mode disabled
- <6>[ 2.316528] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 2.316650] mmc4: Slot eject status = 0
- <6>[ 2.316864] mmc4: Power save feature enable = 1
- <6>[ 2.316955] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d960000
- <6>[ 2.317138] mmc4: DM cmd busaddr 0x5d960000, cmdptr busaddr 0x5d977f40
- <7>[ 2.318115] Registered led device: camera:flash0
- <7>[ 2.318267] Registered led device: camera:flash1
- <6>[ 2.320678] usbcore: registered new interface driver usbhid
- <6>[ 2.320800] usbhid: USB HID core driver
- <6>[ 2.321411] logger: created 512K log 'log_main'
- <6>[ 2.321624] logger: created 256K log 'log_events'
- <6>[ 2.321868] logger: created 512K log 'log_radio'
- <6>[ 2.322052] logger: created 256K log 'log_system'
- <6>[ 2.322204] sec_getlog_supply_loggerinfo: 0xc11c0ee0 0xc1240ee0 0xc12c0ee0 0xc1300ee0
- <6>[ 2.323242] zram: Created 1 device(s) ...
- <6>[ 2.323669] usbcore: registered new interface driver snd-usb-audio
- <6>[ 2.325195] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- <6>[ 2.325622] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- <6>[ 2.326080] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- <6>[ 2.327972] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- <6>[ 2.329528] ALSA device list:
- <6>[ 2.329650] #0: msm-audio
- <6>[ 2.330291] oprofile: using arm/armv7-scorpionmp
- <6>[ 2.330535] GACT probability NOT on
- <6>[ 2.330688] Mirror/redirect action on
- <6>[ 2.330780] u32 classifier
- <6>[ 2.330871] Actions configured
- <6>[ 2.331115] Netfilter messages via NETLINK v0.30.
- <6>[ 2.331298] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
- <6>[ 2.337158] ctnetlink v0.93: registering with nfnetlink.
- <3>[ 2.342315] [TSP] Calibration End!!!!!!
- <6>[ 2.342407] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 2.342437] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <3>[ 2.342712] [TSP] Clearing unused slots
- <6>[ 2.342926] xt_time: kernel timezone is -0000
- <6>[ 2.343292] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.343658] arp_tables: (C) 2002 David S. Miller
- <6>[ 2.343811] TCP cubic registered
- <6>[ 2.343902] Initializing XFRM netlink socket
- <6>[ 2.344696] NET: Registered protocol family 10
- <6>[ 2.362243] Mobile IPv6
- <6>[ 2.362396] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.367797] IPv6 over IPv4 tunneling driver
- <6>[ 2.389251] NET: Registered protocol family 17
- <6>[ 2.394500] NET: Registered protocol family 15
- <6>[ 2.395874] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 2.396026] Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.396179] Bluetooth: RFCOMM ver 1.11
- <6>[ 2.396301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.396453] Bluetooth: BNEP filters: protocol multicast
- <6>[ 2.396575] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.396911] NET: Registered protocol family 35
- <5>[ 2.397094] Registering the dns_resolver key type
- <6>[ 2.397247] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- <5>[ 2.397583] Registering SWP/SWPB emulation handler
- <6>[ 2.411834] clock_late_init() disabled 186 unused clocks
- <6>[ 2.416473] MSM Watchdog Initialized
- <3>[ 2.417388] set_dload_mode <0> ( C0016AC8 )
- <4>[ 2.418273] [TKEY] touchkey_init START
- <6>[ 2.418365] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.419219] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
- <4>[ 2.419494] [TKEY] sec i2c_touchkey_probe
- <6>[ 2.419738] input: sec_touchkey as /devices/virtual/input/input10
- <4>[ 2.420257] [TKEY] enter touchkey_auto_calibration
- <6>[ 2.433532] mmc0: new high speed MMC card at address 0001
- <6>[ 2.434051] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
- <6>[ 2.434356] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
- <6>[ 2.434661] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
- <6>[ 2.439239] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
- <6>[ 2.444396] mmcblk0boot1: unknown partition table
- <6>[ 2.446655] mmcblk0boot0: unknown partition table
- <4>[ 2.469116] [TKEY] after touchkey_auto_calibration result = 1
- <4>[ 2.469390] [TKEY] touchkey_init END
- <6>[ 2.480072] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-10-24 16:53:51 UTC (1445705631)
- <6>[ 2.480377] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 2.480865] sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 2.481842] sec_bat_polling_work: adc work already on a queue
- <4>[ 2.482177] ------------[ cut here ]------------
- <4>[ 2.482330] WARNING: at /home/chris/android/github_trackers/cyber/fs/proc/generic.c:586 proc_register+0x150/0x1ac()
- <4>[ 2.482543] proc_dir_entry '/proc/last_kmsg' already registered
- <4>[ 2.482635] Modules linked in:
- <4>[ 2.482879] [<c010a658>] (unwind_backtrace+0x0/0xe0) from [<c0189cc4>] (warn_slowpath_common+0x4c/0x64)
- <4>[ 2.483001] [<c0189cc4>] (warn_slowpath_common+0x4c/0x64) from [<c0189d08>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 2.483215] [<c0189d08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c026f31c>] (proc_register+0x150/0x1ac)
- <4>[ 2.483398] [<c026f31c>] (proc_register+0x150/0x1ac) from [<c026f700>] (create_proc_entry+0x70/0x90)
- <4>[ 2.483581] [<c026f700>] (create_proc_entry+0x70/0x90) from [<c00318b8>] (ram_console_late_init+0x24/0x70)
- <4>[ 2.483795] [<c00318b8>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150)
- <4>[ 2.483978] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b0>] (kernel_init+0x9c/0x144)
- <4>[ 2.484100] [<c00089b0>] (kernel_init+0x9c/0x144) from [<c0105b7c>] (kernel_thread_exit+0x0/0x8)
- <4>[ 2.484283] ---[ end trace c9af6b48299343f0 ]---
- <4>[ 2.484649] Warning: unable to open an initial console.
- <6>[ 2.484985] Freeing init memory: 276K
- <6>[ 2.494476] usb_reset: usb: notify offline
- <7>[ 2.494659] SELinux: 2048 avtab hash slots, 8222 rules.
- <7>[ 2.497985] SELinux: 2048 avtab hash slots, 8222 rules.
- <7>[ 2.498168] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- <7>[ 2.498413] SELinux: 86 classes, 8222 rules
- <7>[ 2.499816] usb: composite_disconnect
- <7>[ 2.499938] usb: android_disconnect schedule_work
- <7>[ 2.500213] SELinux: Completing initialization.
- <7>[ 2.500396] SELinux: Setting up existing superblocks.
- <7>[ 2.500518] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 2.500701] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 2.500915] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 2.501098] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 2.501281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.501434] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 2.511169] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.511352] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.511474] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.511657] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.511871] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.512115] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.512329] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 2.515991] usb: android_work config= (null),connected=0,sw_connected=0
- <6>[ 2.516113] android_work: did not send uevent (0 0 (null))
- <6>[ 2.526702] pmic8058_xoadc:The offset for AMUX calibrationwas -555
- <3>[ 2.532257] [fg] p:9038, s1:96, s2:100, v:4152500, t:0
- <3>[ 2.624542] param_sec_operation: filp_open failed. (-2)
- <3>[ 2.624633] sec_open_param PARAM OPEN FAIL
- <3>[ 2.624816] sec_switch_init_work error value = 3
- <5>[ 2.802673] type=1403 audit(1445705631.810:2): policy loaded auid=4294967295 ses=4294967295
- <6>[ 2.937072] sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 2.944641] init: invalid gid 'qcom_oncrpc'
- <3>[ 2.944885] init: invalid uid 'fm_radio'
- <6>[ 3.108642] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
- <3>[ 3.479553] init: could not open /dev/keychord
- <7>[ 3.515075] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 3.515808] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 3.518402] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 3.518829] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 3.544982] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 3.569580] SELinux: initialized (dev mmcblk0p13, type vfat), uses mountpoint labeling
- <6>[ 3.569854] fs_mgr: __mount(source=/dev/block/mmcblk0p13,target=/firmware,type=vfat)=0
- <7>[ 3.582000] SELinux: initialized (dev mmcblk0p17, type vfat), uses mountpoint labeling
- <6>[ 3.582153] fs_mgr: __mount(source=/dev/block/mmcblk0p17,target=/firmware-mdm,type=vfat)=0
- <6>[ 3.610626] EXT4-fs (mmcblk0p21): recovery complete
- <6>[ 3.615844] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- <7>[ 3.616058] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
- <6>[ 3.616302] fs_mgr: __mount(source=/dev/block/mmcblk0p21,target=/efs,type=ext4)=0
- <6>[ 3.624603] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=panic
- <7>[ 3.624816] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <6>[ 3.625244] fs_mgr: __mount(source=/dev/block/mmcblk0p24,target=/system,type=ext4)=0
- <3>[ 3.625823] sec_switch_init_work value = 1
- <3>[ 3.625915] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
- <4>[ 3.636108] fsa9480_manual_switching(0)
- <6>[ 3.643341] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x20130)
- <3>[ 3.643463] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- <6>[ 3.644104] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- <3>[ 3.644287] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- <6>[ 3.644378] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x20130)
- <3>[ 3.644561] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- <6>[ 3.644744] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- <3>[ 3.644897] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- <6>[ 3.765045] fs_mgr: __mount(source=/dev/block/mmcblk0p25,target=/data,type=f2fs)=-1
- <6>[ 3.985076] sec_jack:sec_jack_det_irq_handler : ready = 1.
- <6>[ 3.985229] sec_jack: ear micbias off
- <4>[ 4.607330] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
- <4>[ 4.607727] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
- <4>[ 4.607879] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
- <6>[ 4.635314] a2220_bootup_init: firmware loaded successfully
- <6>[ 4.758331] EXT4-fs (mmcblk0p25): recovery complete
- <6>[ 4.765533] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 4.765747] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <6>[ 4.766021] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p25,/data,ext4)=0
- <3>[ 4.775329] sec_bat_measure_work: adc work already on a queue
- <6>[ 4.826171] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p25
- <4>[ 4.845642] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
- <4>[ 4.845764] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
- <4>[ 4.845916] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
- <4>[ 4.846191] audience_a2220 :execute_cmdmsg : ...go to suspend first
- <4>[ 4.846374] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
- <6>[ 4.897308] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <6>[ 4.897552] e2fsck: /dev/block/mmcblk0p25: clean, 6983/131376 files, 406108/524796 blocks
- <6>[ 4.911010] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- <7>[ 4.911163] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <6>[ 4.911407] fs_mgr: __mount(source=/dev/block/mmcblk0p25,target=/data,type=ext4)=0
- <3>[ 4.911621] fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p25 on /data with fs_type=ext4 instead of f2fs
- <6>[ 4.920959] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x4b90)
- <3>[ 4.921081] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
- <6>[ 4.921691] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- <3>[ 4.921875] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
- <6>[ 4.921966] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x4b90)
- <3>[ 4.922149] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
- <6>[ 4.922332] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- <3>[ 4.922454] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
- <4>[ 4.975708] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
- <6>[ 4.975891] a2220_bootup_init: initialized!
- <4>[ 4.975982] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
- <6>[ 4.985412] fs_mgr: __mount(source=/dev/block/mmcblk0p26,target=/cache,type=f2fs)=-1
- <6>[ 5.054107] EXT4-fs (mmcblk0p26): recovery complete
- <6>[ 5.059051] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 5.059265] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- <6>[ 5.059448] fs_mgr: check_fs(): mount(/dev/block/mmcblk0p26,/cache,ext4)=0
- <6>[ 5.125396] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p26
- <6>[ 5.154510] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <6>[ 5.154663] e2fsck: /dev/block/mmcblk0p26: clean, 29/19344 files, 2513/77312 blocks
- <6>[ 5.173461] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
- <7>[ 5.173614] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- <6>[ 5.173828] fs_mgr: __mount(source=/dev/block/mmcblk0p26,target=/cache,type=ext4)=0
- <3>[ 5.174041] fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p26 on /cache with fs_type=ext4 instead of f2fs
- <38>[ 5.794891] logd.auditd: start
- <6>[ 5.806793] warning: `qmuxd' uses 32-bit capabilities (legacy support in use)
- <6>[ 6.270355] pil_qdsp6v3 pil_qdsp6v3: brought out of reset
- <6>[ 6.305297] apr_tal:Q6 Is Up
- <3>[ 6.662414] healthd: wakealarm_init: timerfd_create failed
- <4>[ 6.666259] healthd: battery l=96 v=4182 t=28.3 h=2 st=2 chg=a
- <3>[ 6.805450] sec_bat_measure_work: adc work already on a queue
- <4>[ 6.810455] healthd: battery l=96 v=4157 t=28.3 h=2 st=2 chg=a
- <6>[ 7.653747] pil_modem pil_modem: brought out of reset
- <3>[ 7.653930] smd_tty_open: DS open failed -19
- <3>[ 7.664031] init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
- <3>[ 7.664245] init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
- <3>[ 7.664459] init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
- <3>[ 7.664642] init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
- <3>[ 7.664794] init: property 'ro.model' doesn't exist while expanding '$ro.model'
- <3>[ 7.664978] init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
- <3>[ 7.665161] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- <6>[ 7.665435] msmsdcc_runtime_suspend: Enter WIFI suspend
- <7>[ 7.665863] mass_storage_vendor_store: vendor SAMSUNG
- <7>[ 7.666229] mass_storage_product_store: product SGH-T989
- <3>[ 7.670867] init: service 'console' requires console
- <3>[ 7.675018] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- <3>[ 7.704620] init: Warning! Service zygote needs a SELinux domain defined; please fix!
- <3>[ 7.707855] android_usb: already disabled
- <7>[ 7.710571] usb: enable_store f:adb
- <6>[ 7.720184] charm_modem_ioctl: Entering ioctl cmd = 1
- <6>[ 7.720275] charm_modem_ioctl: Powering on
- <4>[ 7.720916] rmt_storage (200): /proc/200/oom_adj is deprecated, please use /proc/200/oom_score_adj instead.
- <6>[ 7.765350] adb_open
- <6>[ 7.765472] adb_bind_config
- <3>[ 7.786560] Notify: smsm init
- <6>[ 7.786682] _smem_log_init: no power log or log_idx allocated
- <6>[ 7.838134] rpcrouter_smd_remote_notify: smd opened 0x (null)
- <6>[ 7.848144] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000
- <6>[ 7.848358] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000
- <6>[ 7.848663] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
- <4>[ 7.869995] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 7.882995] rmt_storage_event_open_cb: open callback received
- <6>[ 7.883178] open partition /boot/modem_fs1 handle=1
- <6>[ 7.885955] rmt_storage_event_user_data_cb: send user data callback received
- <6>[ 7.886596] rmt_storage_event_open_cb: open callback received
- <6>[ 7.886779] open partition /boot/modem_fs2 handle=2
- <6>[ 7.887268] rmt_storage_event_user_data_cb: send user data callback received
- <6>[ 7.887878] rmt_storage_event_open_cb: open callback received
- <6>[ 7.888000] open partition /boot/modem_fsg handle=3
- <6>[ 7.889678] rmt_storage_event_user_data_cb: send user data callback received
- <6>[ 7.890228] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
- <6>[ 7.890960] rmt_storage_event_read_iovec_cb: read iovec callback received
- <6>[ 7.909759] rmt_storage_ioctl: send status ioctl
- <6>[ 7.910552] rmt_storage_event_read_iovec_cb: read iovec callback received
- <6>[ 7.944610] rmt_storage_ioctl: send status ioctl
- <6>[ 7.955474] rmt_storage_event_read_iovec_cb: read iovec callback received
- <4>[ 8.046417] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 8.149353] rmt_storage_ioctl: send status ioctl
- <4>[ 8.223205] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <6>[ 8.295440] fsa9480 5-0025: fsa9480_init_detect
- <6>[ 8.296508] fsa9480 5-0025: dev1: 0x4, dev2: 0x0
- <6>[ 8.296661] fsa9480 5-0025: usb connect
- <3>[ 8.296752] fsa9480_usb_cb attached 1
- <3>[ 8.296875] [TSP] mxt224_ta_probe
- <3>[ 8.312713] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <6>[ 8.312835] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
- <3>[ 8.314575] [TSP] Calibration!!!!!!
- <3>[ 8.342163] [TSP] Calibration End!!!!!!
- <3>[ 8.342346] [TSP] Clearing unused slots
- <4>[ 8.400115] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 8.576690] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 8.805511] smb328a 15-0034: smb328a_set_charging_current :
- <6>[ 8.806030] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x2d
- <6>[ 8.806854] smb328a_set_command_reg : => reg (0x31) = 0xa9
- <6>[ 8.807708] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x17
- <6>[ 8.808288] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x4
- <6>[ 8.809143] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
- <6>[ 8.809631] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
- <6>[ 8.810150] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
- <6>[ 8.810974] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
- <6>[ 8.811462] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x4e
- <6>[ 8.813262] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
- <6>[ 8.813842] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x88
- <6>[ 8.814636] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
- <6>[ 8.815216] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x55
- <6>[ 8.816131] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x4d
- <6>[ 8.816650] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0xf6
- <6>[ 8.817230] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
- <6>[ 8.818084] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
- <6>[ 8.818908] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
- <6>[ 8.819091] smb328a 15-0034: smb328a_get_input_current_limit :
- <6>[ 8.819580] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10
- <6>[ 8.819763] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0
- <6>[ 8.820312] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
- <6>[ 8.821166] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17
- <6>[ 8.821990] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17
- <6>[ 8.822540] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
- <6>[ 8.823455] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
- <6>[ 8.824401] smb328a 15-0034: smb328a_enable_charging :
- <6>[ 8.824890] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9
- <6>[ 8.825775] smb328a_enable_charging : => reg (0x31) = 0xa9
- <6>[ 8.825897] smb328a 15-0034: smb328a_watchdog_control : (1)
- <6>[ 8.827362] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
- <6>[ 8.828155] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
- <4>[ 8.830596] healthd: battery l=96 v=4127 t=28.3 h=2 st=2 chg=u
- <6>[ 8.928497] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 59080000
- <7>[ 9.076660] SELinux: 2048 avtab hash slots, 8304 rules.
- <7>[ 9.080352] SELinux: 2048 avtab hash slots, 8304 rules.
- <7>[ 9.080474] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- <7>[ 9.080810] SELinux: 86 classes, 8304 rules
- <7>[ 9.586791] SELinux: 2048 avtab hash slots, 8304 rules.
- <7>[ 9.590454] SELinux: 2048 avtab hash slots, 8304 rules.
- <7>[ 9.590606] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- <7>[ 9.590942] SELinux: 86 classes, 8304 rules
- <6>[ 9.794647] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- <6>[ 9.988067] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- <6>[ 10.029571] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- <3>[ 10.142425] init: untracked pid 423 exited with status 0
- <6>[ 11.519653] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
- <6>[ 11.519805] msm8x60_multi_sdio_slot_status_irq: calling sdc2_status_notify_cb
- <6>[ 11.520019] msm8x60_multi_sdio_slot_status_irq: calling sdc5_status_notify_cb
- <6>[ 11.577453] mmc1: new high speed SDIO card at address 0002
- <6>[ 11.582061] mmc mmc1:0002: SDIO Card claimed.
- <6>[ 11.582580] sdio_al:setup bootloader on card 1
- <6>[ 11.582733] sdio_al: SDIOC BOOT SW version 0x30001
- <6>[ 11.591369] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
- <6>[ 11.591583] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
- <6>[ 11.592041] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
- <6>[ 11.592529] sdio_al:In Flashless boot, waiting for its completion
- <6>[ 11.592651] sdio_al:free sdioc_boot_sw_header.
- <6>[ 11.653228] mmc4: new high speed SDIO card at address 0002
- <6>[ 11.654968] mmc mmc4:0002: SDIO Card claimed.
- <6>[ 11.655426] sdio_al:wait for bootloader completion on card 4
- <6>[ 11.655914] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
- <6>[ 12.270568] sdio_al: sdio_dld_open, TTY DEVICE FOR FLASHLESS BOOT OPENED
- <6>[ 12.346099] charm_status_change: charm sent status change interrupt
- <6>[ 12.346282] charm_status_change: charm is now ready
- <4>[ 12.993286] msm_otg_irq: 52 callbacks suppressed
- <4>[ 12.993438] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 13.169860] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 13.346679] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 13.523559] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 13.700012] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 13.832519] msm_release_control: control0
- <6>[ 13.833404] __msm_release, open count =0
- <6>[ 13.833496] __msm_release, release VFE
- <6>[ 13.915649] auddev_cb_function, evt_id=64,
- <3>[ 13.915832] msm_reset_put:Resetting all devices
- <6>[ 13.915954] msm_clear_all_session:
- <6>[ 13.965332] apr_tal: SMD_EVENT_OPEN
- <6>[ 13.971038] pcm_in_open: pcm in open session id[1]
- <6>[ 13.973327] [pcm_in.c:pcm_in_release] release session id[1]
- <6>[ 15.375610] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - DURATION IN MSEC = 3110
- <6>[ 15.375732] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES WRITTEN ON SDIO BUS = 30325344...BYTES SENT BY TTY = 30325344
- <6>[ 15.375946] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES RECEIVED ON SDIO BUS = 1732...BYTES SENT TO TTY = 1732
- <6>[ 15.376220] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - THROUGHPUT=78 Mbit/Sec
- <6>[ 15.376464] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL_BUFFER_SIZE=16 KB..CLIENT UL_BUFFER=48 KB
- <6>[ 15.376739] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST OUTGOING BUFFER_SIZE=48 KB
- <6>[ 15.376922] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL BUFFER ADDRESS = 0x4000
- <6>[ 15.377105] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT UP BUFFER ADDRESS = 0x8000
- <6>[ 15.377380] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - READ POINTER = 47712
- <6>[ 15.377655] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - WRITE POINTER = 47712
- <6>[ 15.377899] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - READ POINTER = 1732
- <6>[ 15.378387] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - WRITE POINTER = 1732
- <6>[ 15.378601] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - READ POINTER = 47712
- <6>[ 15.378875] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - WRITE POINTER = 47712
- <6>[ 15.379211] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - END DEBUG INFO
- <6>[ 15.379486] sdio_al:Got bootloader_done event..
- <6>[ 15.379516] sdio_al:Got bootloader_done event..
- <6>[ 15.380493] sdio_al: sdio_dld_close - Bootloader done, returning...
- <6>[ 15.381927] charm_modem_ioctl: Entering ioctl cmd = 5
- <6>[ 15.382171] charm_modem_ioctl: check if charm is booted up
- <6>[ 15.382293] charm_modem_ioctl: Entering ioctl cmd = 7
- <6>[ 15.382385] charm_modem_ioctl: wait for charm to need images reloaded
- <6>[ 16.211547] input: compass_sensor as /devices/virtual/input/input11
- <4>[ 16.222412] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <4>[ 16.223266] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_FUSE_ACCESS
- <4>[ 16.225372] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <4>[ 16.239715] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <6>[ 16.365783] sdio_al:user_irq enabled
- <6>[ 16.366058] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
- <6>[ 16.366241] sdio_al:sdio_al_setup for card 4
- <6>[ 16.368652] sdio_al:claim IRQ for card 4
- <6>[ 16.369445] rpcrouter_sdio_remote_probe Called
- <6>[ 16.370056] sdio_al:ch SDIO_RPC read_threshold=1, write_threshold=576, min_write_avail=544, max_rx_threshold=1088, max_tx_threshold=1152
- <6>[ 16.370605] sdio_al:sdio_open SDIO_RPC completed OK
- <6>[ 16.370727] sdio_al: setting channel SDIO_RPC as lpm_chan
- <6>[ 16.370910] rpcrouter_sdio_remote_probe Completed
- <4>[ 16.965728] sensor_power_on_vdd: vdd_2p85=5, vdd_1p8=5, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 16.965911] 15328
- <4>[ 16.966003] LED_onoff: LED_onff = 1
- <4>[ 16.985900] opt_i2c_write(497): : 0x1, 0x8
- <4>[ 16.986511] opt_i2c_write(497): : 0x2, 0x40
- <4>[ 16.987060] opt_i2c_write(497): : 0x3, 0x0
- <4>[ 16.987609] opt_i2c_write(497): : 0x4, 0x3
- <4>[ 16.988220] opt_i2c_write(497): : 0x5, 0xc0
- <4>[ 16.988769] opt_i2c_write(497): : 0x4, 0x1
- <4>[ 17.045440] proximity_enable_store(253): [PROX] Start proximity = 1
- <4>[ 17.046020] opt_i2c_write(497): : 0x4, 0x3
- <3>[ 17.295959] [GYRO] k3g_set_enable: dps = 0 CTRL_REG4 = 0x90
- <4>[ 17.329650] opt_i2c_write(497): : 0x4, 0x2
- <6>[ 17.329772] 15328
- <4>[ 17.329925] LED_onoff: LED_onff = 0
- <3>[ 17.330352] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
- <4>[ 17.330566] sensor_power_off_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 17.675506] request_suspend_state: wakeup (3->0) at 17650132049 (2015-10-24 16:54:06.685704932 UTC)
- <4>[ 18.118835] msm_otg_irq: 48 callbacks suppressed
- <4>[ 18.118927] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 18.295562] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 18.472351] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 18.649230] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 18.826171] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 19.775543] sdio_al:user_irq enabled
- <6>[ 19.775787] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
- <6>[ 19.775970] sdio_al:sdio_al_setup for card 1
- <6>[ 19.776306] sdio_al:ch SDIO_QMI read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=8192, max_tx_threshold=8192
- <6>[ 19.777099] sdio_al:sdio_open SDIO_QMI completed OK
- <6>[ 19.778594] sdio_ctl_probe Begins
- <6>[ 19.779174] sdio_al:claim IRQ for card 1
- <6>[ 19.835723] sdio_al:ch SDIO_RMNT read_threshold=1, write_threshold=4096, min_write_avail=1600, max_rx_threshold=15360, max_tx_threshold=8192
- <6>[ 19.836334] sdio_al:sdio_open SDIO_RMNT completed OK
- <6>[ 19.836425] sdio_al: setting channel SDIO_RMNT as lpm_chan
- <6>[ 19.938354] msm_sdio_dmux_open: opened ch 0
- <6>[ 20.439575] msm_sdio_dmux_open: opened ch 1
- <6>[ 20.440063] msm_sdio_dmux_open: opened ch 2
- <6>[ 20.440795] msm_sdio_dmux_open: opened ch 3
- <6>[ 20.441253] msm_sdio_dmux_open: opened ch 4
- <6>[ 20.441558] msm_sdio_dmux_open: opened ch 5
- <6>[ 20.441802] msm_sdio_dmux_open: opened ch 6
- <6>[ 20.442108] msm_sdio_dmux_open: opened ch 7
- <3>[ 20.815460] ERROR sdio_cmux_open: Wait Timed Out for ch0
- <3>[ 20.815582] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- <3>[ 22.315460] ERROR sdio_cmux_open: Wait Timed Out for ch0
- <3>[ 22.315582] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- <4>[ 23.248229] msm_otg_irq: 48 callbacks suppressed
- <4>[ 23.248352] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 23.424896] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 23.601623] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 23.778747] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 23.815490] ERROR sdio_cmux_open: Wait Timed Out for ch0
- <3>[ 23.815673] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- <4>[ 23.955810] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 25.315429] ERROR sdio_cmux_open: Wait Timed Out for ch0
- <3>[ 25.315551] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- <3>[ 25.835449] sdio_al: sdio_enable_func() err=62
- <3>[ 25.835571] sdio_al:sdio_open SDIO_DIAG err=62
- <6>[ 25.835723] DIAG could not open SDIO channel
- <4>[ 25.835876] SDIO_DIAG: probe of SDIO_DIAG failed with error -62
- <6>[ 25.860900] rmt_storage_probe: Remote storage RPC client (0x300100a7)initialized
- <4>[ 28.376831] msm_otg_irq: 48 callbacks suppressed
- <4>[ 28.377014] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 28.553466] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 28.730133] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 28.906890] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 29.083465] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 31.059661] healthd: battery l=96 v=4127 t=28.3 h=2 st=2 chg=u
- <4>[ 31.205291] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 31.205505] [VIBETONZ] DISABLE
- <4>[ 31.482452] lowmem_shrink: convert oom_adj to oom_score_adj:
- <4>[ 31.482574] oom_adj 0 => oom_score_adj 0
- <4>[ 31.482696] oom_adj 1 => oom_score_adj 58
- <4>[ 31.482849] oom_adj 2 => oom_score_adj 117
- <4>[ 31.482940] oom_adj 3 => oom_score_adj 176
- <4>[ 31.483123] oom_adj 9 => oom_score_adj 529
- <4>[ 31.483215] oom_adj 15 => oom_score_adj 1000
- <6>[ 31.909423] msm_release_control: control0
- <6>[ 31.909606] __msm_release, open count =0
- <6>[ 31.909698] __msm_release, release VFE
- <6>[ 31.913513] msm_camio_sensor_clk_on
- <4>[ 31.925415] camera_power_maincam :ON
- <4>[ 31.930755] AF 2.8V
- <4>[ 31.937408] SENSOR IO 1.8V
- <6>[ 31.975433] msm_camio_sensor_clk_on : X
- <3>[ 31.975616] [M5MO] m5mo_sensor_open_init:2418:E
- <7>[ 31.975708] [M5MO] m5mo_register_isp_irq : E
- <7>[ 31.975921] [M5MO] m5mo_start : E
- <6>[ 31.976318] [M5MO] m5mo_wait_interrupt :E
- <6>[ 32.060394] [M5MO]**************** interrupt ****************
- <6>[ 32.061218] [M5MO] m5mo_wait_interrupt: X: 0x1
- <4>[ 32.065612] *************************************
- <4>[ 32.065704] [M5MO] F/W Version: SDEH0D
- <4>[ 32.065856] [M5MO] Firmware Version: 1
- <4>[ 32.065979] [M5MO] Parameter Version: 3118
- <4>[ 32.066070] [M5MO] AWB Version: 2a06
- <4>[ 32.066223] *************************************
- <6>[ 32.066986] [M5MO]set Preview size as VGA
- <6>[ 32.067413] [M5MO]set antibanding
- <7>[ 32.069366] [M5MO] m5mo_start : X
- <7>[ 32.069458] [M5MO] m5mo_sensor_init_probe : m5mo_start END 1
- <3>[ 32.069641] [M5MO] m5mo_sensor_open_init:2458:X
- <7>[ 32.072326] [M5MO] m5mo_set_fps : fps : 30
- <7>[ 32.072692] [M5MO] m5mo_set_scene : 1
- <7>[ 32.073547] [M5MO] m5mo_set_ev : 4
- <7>[ 32.073974] [M5MO] m5mo_set_saturation : 2
- <7>[ 32.074401] [M5MO] m5mo_set_sharpness : 2
- <7>[ 32.075286] [M5MO] m5mo_set_whitebalance : 1
- <7>[ 32.076110] [M5MO] m5mo_set_flash : 0
- <6>[ 32.076202] [M5MO]Flash Off is set
- <6>[ 32.081695] msm_release_config: config0
- <6>[ 32.081787] __msm_release, open count =1
- <6>[ 32.082092] msm_release_control: control0
- <6>[ 32.082244] msm_release_control, stop vfe if active
- <6>[ 32.082366] __msm_release, open count =0
- <6>[ 32.082458] __msm_release, release VFE
- <6>[ 32.111694] __msm_release, release Sensor
- <7>[ 32.111816] [M5MO] m5mo_set_af_softlanding : E
- <7>[ 32.112396] [M5MO] m5mo_set_mode : E 0x1 -> 0x2
- <7>[ 32.113342] [M5MO] m5mo_i2c_verify : [c,b,v] [00, 0b, 02] (try = 0)
- <7>[ 32.113464] [M5MO] m5mo_set_mode : X
- <6>[ 32.125976] [M5MO]status = 4
- <7>[ 32.126068] [M5MO] m5mo_set_af_softlanding : X
- <6>[ 32.129180] msm_camio_sensor_clk_off
- <4>[ 32.145446] camera_power_maincam :OFF
- <6>[ 32.159759] msm_camio_sensor_clk_off : X
- <6>[ 32.206512] msm_release_control: control0
- <6>[ 32.206695] __msm_release, open count =0
- <6>[ 32.206787] __msm_release, release VFE
- <6>[ 32.210449] msm_camio_sensor_clk_on
- <4>[ 32.225433] camera_power_vtcam :ON
- <6>[ 32.265441] msm_camio_sensor_clk_on : X
- <7>[ 32.265533] [5BAFX] s5k5bafx_sensor_open_init : E
- <7>[ 32.265716] [5BAFX] s5k5bafx_sensor_open_init : X
- <7>[ 32.268218] [5BAFX] s5k5bafx_sensor_ext_config : cmd = 10 , param1 = 15
- <3>[ 32.268402] [5BAFX] s5k5bafx_sensor_ext_config:1151:camera isn't initialized
- <3>[ 32.268432]
- <6>[ 32.273223] msm_release_config: config1
- <6>[ 32.273315] __msm_release, open count =1
- <6>[ 32.273742] msm_release_control: control1
- <6>[ 32.273956] msm_release_control, stop vfe if active
- <6>[ 32.274078] __msm_release, open count =0
- <6>[ 32.274169] __msm_release, release VFE
- <6>[ 32.301788] __msm_release, release Sensor
- <6>[ 32.301879] msm_camio_sensor_clk_off
- <4>[ 32.315429] camera_power_vtcam :OFF
- <6>[ 32.325561] msm_camio_sensor_clk_off : X
- <6>[ 33.170684] acc_open
- <6>[ 33.170806] acc_release
- <4>[ 33.358551] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 33.358795] [VIBETONZ] DISABLE
- <4>[ 33.367553] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
- <4>[ 33.367767] [VIBETONZ] ENABLE
- <4>[ 33.371246] [VIBETONZ] DISABLE
- <4>[ 33.388885] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 33.389099] [VIBETONZ] DISABLE
- <4>[ 33.503692] msm_otg_irq: 48 callbacks suppressed
- <4>[ 33.503814] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 33.680358] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 33.857025] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 33.963775] wifi_set_power = 1
- <4>[ 33.963867] brcm_wlan_power: 1
- <4>[ 34.033599] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 34.045471] wifi_set_carddetect = 1
- <4>[ 34.045593] msm_device_sdc4.name= 4
- <4>[ 34.160949] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
- <4>[ 34.163543] mmc3: queuing unknown CIS tuple 0x80 (6 bytes)
- <4>[ 34.210266] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 34.222900] mmc3: new high speed SDIO card at address 0001
- <4>[ 34.230194] alloc static buf at dea00000!
- <4>[ 34.231292] dhdsdio_probe : no mutex held. set lock
- <4>[ 34.231597] F1 signature read @0x18000000=0x16834330
- <4>[ 34.241119] DHD: dongle ram size is set to 294912(orig 294912)
- <6>[ 34.244354] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xdcc17640
- <4>[ 34.244628] wl_create_event_handler thr:293 created
- <4>[ 34.251403] p2p0: P2P Interface Registered
- <4>[ 34.251861] dhd_attach thr:294 created
- <4>[ 34.252288] dhd_attach thr:295 created
- <4>[ 34.252532] dhd_attach thr:296 created
- <4>[ 34.315460] ld9040 get_gamma_value_from_bl >>> bl_value:250, gamma_value: 22.
- <4>[ 34.315490] ld9040 brightness!!! bl_level=255, tune_level=22 curr=18
- <4>[ 34.317657] ld9040 ea8868_gamma_ctl 22 22
- <4>[ 34.327117] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <4>[ 34.451934] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- <4>[ 34.463867] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
- <4>[ 34.467987] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=04:4d:af
- <4>[ 34.474975] POWER_VAL = 1
- <4>[ 34.483154] dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23
- <4>[ 34.489624] Firmware version = wl0: Dec 6 2012 21:27:24 version 5.90.100.430 (JB) (WFD)
- <4>[ 34.494903] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 04:4d:af
- <4>[ 34.495086] dhdsdio_probe : the lock is released.
- <4>[ 34.495269]
- <4>[ 34.495300] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
- <4>[ 34.495330] Compiled in drivers/net/wireless/bcmdhd on Oct 12 2015 at 21:24:09
- <4>[ 35.146453]
- <4>[ 35.146453] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
- <4>[ 35.146484] Compiled in drivers/net/wireless/bcmdhd on Oct 12 2015 at 21:24:09
- <6>[ 35.167785] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=06:4d:af
- <6>[ 35.687988] apr_tal: SMD_EVENT_OPEN
- <6>[ 35.694427] evrc_in_open:session id 1: NT mode encoder success
- <6>[ 35.694549] evrc_in_open:session id 1: success
- <6>[ 35.699218] audio_in_release: session id 1
- <6>[ 35.723815] apr_tal: SMD_EVENT_OPEN
- <6>[ 35.729949] qcelp_in_open:session id 1: NT mode encoder success
- <6>[ 35.730133] qcelp_in_open:session id 1: success
- <6>[ 35.734680] audio_in_release: session id 1
- <6>[ 35.744049] msm_vidc_venc: Inside vid_enc_open()
- <6>[ 35.744171]
- <6>[ 35.744171] msm_vidc_enc: Inside vid_enc_open_client()
- <4>[ 35.744506]
- <4>[ 35.744537] res_trk_download_firmware(): Request firmware download
- <4>[ 35.779632]
- <4>[ 35.779663] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 35.796630] fw_version 7:19:2012
- <6>[ 35.797668]
- <6>[ 35.797698] msm_vidc_enc: Inside vid_enc_release()
- <6>[ 35.798004]
- <6>[ 35.798034] msm_vidc_enc: Inside vid_enc_close_client()
- <6>[ 35.818328]
- <6>[ 35.818359] msm_vidc_enc: Return from vid_enc_release()
- <6>[ 35.819641] msm_vidc_venc: Inside vid_enc_open()
- <6>[ 35.819885]
- <6>[ 35.819885] msm_vidc_enc: Inside vid_enc_open_client()
- <4>[ 35.821136]
- <4>[ 35.821166] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 35.835906] fw_version 7:19:2012
- <6>[ 35.836883]
- <6>[ 35.836914] msm_vidc_enc: Inside vid_enc_release()
- <6>[ 35.837219]
- <6>[ 35.837249] msm_vidc_enc: Inside vid_enc_close_client()
- <6>[ 35.858886]
- <6>[ 35.858886] msm_vidc_enc: Return from vid_enc_release()
- <6>[ 35.861480] msm_vidc_venc: Inside vid_enc_open()
- <6>[ 35.861663]
- <6>[ 35.861663] msm_vidc_enc: Inside vid_enc_open_client()
- <4>[ 35.863433]
- <4>[ 35.863433] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 35.886657] fw_version 7:19:2012
- <6>[ 35.887481]
- <6>[ 35.887481] msm_vidc_enc: Inside vid_enc_release()
- <6>[ 35.887817]
- <6>[ 35.887817] msm_vidc_enc: Inside vid_enc_close_client()
- <6>[ 35.908172]
- <6>[ 35.908172] msm_vidc_enc: Return from vid_enc_release()
- <6>[ 35.921508] msm_vidc_dec: Inside vid_dec_open()
- <4>[ 35.922515]
- <4>[ 35.922546] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 35.945831] fw_version 7:19:2012
- <6>[ 35.956054] msm_vidc_dec: Inside vid_dec_release()
- <6>[ 35.978363] msm_vidc_dec: Return from vid_dec_release()
- <6>[ 35.979339] msm_vidc_dec: Inside vid_dec_open()
- <4>[ 35.980346]
- <4>[ 35.980377] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 35.995819] fw_version 7:19:2012
- <6>[ 35.998748] msm_vidc_dec: Inside vid_dec_release()
- <6>[ 36.018218] msm_vidc_dec: Return from vid_dec_release()
- <6>[ 36.048858] msm_vidc_dec: Inside vid_dec_open()
- <4>[ 36.049926]
- <4>[ 36.049926] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 36.065734] fw_version 7:19:2012
- <6>[ 36.070922] msm_vidc_dec: Inside vid_dec_release()
- <6>[ 36.088775] msm_vidc_dec: Return from vid_dec_release()
- <6>[ 36.090393] msm_vidc_dec: Inside vid_dec_open()
- <4>[ 36.091522]
- <4>[ 36.091552] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 36.115844] fw_version 7:19:2012
- <6>[ 36.121032] msm_vidc_dec: Inside vid_dec_release()
- <6>[ 36.139739] msm_vidc_dec: Return from vid_dec_release()
- <6>[ 36.140930] msm_vidc_dec: Inside vid_dec_open()
- <4>[ 36.142181]
- <4>[ 36.142181] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- <6>[ 36.165740] fw_version 7:19:2012
- <6>[ 36.167266] msm_vidc_dec: Inside vid_dec_release()
- <6>[ 36.188598] msm_vidc_dec: Return from vid_dec_release()
- <7>[ 37.693450] SELinux: initialized (dev mmcblk0p28, type vfat), uses genfs_contexts
- <4>[ 37.796264] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- <4>[ 37.798004] [VIBETONZ] DISABLE
- <4>[ 38.627929] msm_otg_irq: 50 callbacks suppressed
- <4>[ 38.628112] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 38.805023] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <6>[ 38.890563] apr_tal:Modem Is Up
- <4>[ 38.981872] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 39.158599] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 39.335357] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 43.755493] msm_otg_irq: 48 callbacks suppressed
- <4>[ 43.755615] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 43.932281] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 44.109252] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 44.286102] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <7>[ 44.290618] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- <4>[ 44.462677] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <7>[ 45.425445] p2p0: no IPv6 routers present
- <3>[ 46.676666] MSM_THERMAL: Starting thermal mitigation
- <3>[ 46.676849] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 46.744567] set_freq_limit: 0x8 0, min 192000, max 1242000
- <4>[ 46.902008] healthd: battery l=96 v=4107 t=28.6 h=2 st=2 chg=u
- <4>[ 47.398071] CPU1: Booted secondary processor
- <4>[ 47.399047] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 48.882141] msm_otg_irq: 48 callbacks suppressed
- <4>[ 48.882354] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 49.058929] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 49.235717] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 49.412536] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 49.589416] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 49.685516] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 49.996887] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
- <4>[ 50.423339] wl_bss_connect_done succeeded with 00:ed:1d
- <4>[ 50.450286] wl_bss_connect_done succeeded with 00:ed:1d
- <6>[ 50.514709] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts
- <4>[ 50.758026] Unknown PRIVATE command WLS_BATCHING GET - ignored
- <4>[ 50.760345] Unknown PRIVATE command WLS_BATCHING STOP - ignored
- <6>[ 51.811279] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP is complete
- <3>[ 52.696411] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 54.011962] msm_otg_irq: 48 callbacks suppressed
- <4>[ 54.012115] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 54.188751] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 54.365905] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 54.542785] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 54.608795] ld9040 acl_set_store : 0
- <4>[ 54.609008] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.620239] ld9040 get_gamma_value_from_bl >>> bl_value:249, gamma_value: 21.
- <4>[ 54.620300] ld9040 brightness!!! bl_level=249, tune_level=21 curr=22
- <4>[ 54.620941] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.622344] ld9040 ea8868_gamma_ctl 21 21
- <4>[ 54.634979] ld9040 get_gamma_value_from_bl >>> bl_value:243, gamma_value: 21.
- <4>[ 54.635009] ld9040 brightness!!! bl_level=243, tune_level=21 curr=21
- <4>[ 54.649932] ld9040 get_gamma_value_from_bl >>> bl_value:236, gamma_value: 20.
- <4>[ 54.649963] ld9040 brightness!!! bl_level=236, tune_level=20 curr=21
- <4>[ 54.650634] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.652404] ld9040 ea8868_gamma_ctl 20 20
- <4>[ 54.667785] ld9040 get_gamma_value_from_bl >>> bl_value:229, gamma_value: 19.
- <4>[ 54.667846] ld9040 brightness!!! bl_level=229, tune_level=19 curr=20
- <4>[ 54.669494] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.671569] ld9040 ea8868_gamma_ctl 19 19
- <4>[ 54.685394] ld9040 get_gamma_value_from_bl >>> bl_value:223, gamma_value: 19.
- <4>[ 54.685455] ld9040 brightness!!! bl_level=223, tune_level=19 curr=19
- <4>[ 54.700958] ld9040 get_gamma_value_from_bl >>> bl_value:216, gamma_value: 18.
- <4>[ 54.701049] ld9040 brightness!!! bl_level=216, tune_level=18 curr=19
- <4>[ 54.702117] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.704162] ld9040 ea8868_gamma_ctl 18 18
- <4>[ 54.717254] ld9040 get_gamma_value_from_bl >>> bl_value:209, gamma_value: 17.
- <4>[ 54.717285] ld9040 brightness!!! bl_level=209, tune_level=17 curr=18
- <4>[ 54.718322] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.719696] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 54.721832] ld9040 ea8868_gamma_ctl 17 17
- <4>[ 54.734069] ld9040 get_gamma_value_from_bl >>> bl_value:202, gamma_value: 17.
- <4>[ 54.734130] ld9040 brightness!!! bl_level=202, tune_level=17 curr=17
- <4>[ 54.750854] ld9040 get_gamma_value_from_bl >>> bl_value:196, gamma_value: 16.
- <4>[ 54.750915] ld9040 brightness!!! bl_level=196, tune_level=16 curr=17
- <4>[ 54.751892] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.753692] ld9040 ea8868_gamma_ctl 16 16
- <4>[ 54.767333] ld9040 get_gamma_value_from_bl >>> bl_value:189, gamma_value: 15.
- <4>[ 54.767364] ld9040 brightness!!! bl_level=189, tune_level=15 curr=16
- <4>[ 54.768280] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.769836] ld9040 ea8868_gamma_ctl 15 15
- <4>[ 54.784027] ld9040 get_gamma_value_from_bl >>> bl_value:182, gamma_value: 15.
- <4>[ 54.784057] ld9040 brightness!!! bl_level=182, tune_level=15 curr=15
- <4>[ 54.803100] ld9040 get_gamma_value_from_bl >>> bl_value:176, gamma_value: 14.
- <4>[ 54.803131] ld9040 brightness!!! bl_level=176, tune_level=14 curr=15
- <4>[ 54.803833] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.805450] ld9040 ea8868_gamma_ctl 14 14
- <4>[ 54.818756] ld9040 get_gamma_value_from_bl >>> bl_value:169, gamma_value: 13.
- <4>[ 54.818786] ld9040 brightness!!! bl_level=169, tune_level=13 curr=14
- <4>[ 54.819458] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.821014] ld9040 ea8868_gamma_ctl 13 13
- <4>[ 54.834075] ld9040 get_gamma_value_from_bl >>> bl_value:162, gamma_value: 13.
- <4>[ 54.834136] ld9040 brightness!!! bl_level=162, tune_level=13 curr=13
- <4>[ 54.851318] ld9040 get_gamma_value_from_bl >>> bl_value:156, gamma_value: 12.
- <4>[ 54.851348] ld9040 brightness!!! bl_level=156, tune_level=12 curr=13
- <4>[ 54.852172] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.853607] ld9040 ea8868_gamma_ctl 12 12
- <4>[ 54.869750] ld9040 get_gamma_value_from_bl >>> bl_value:149, gamma_value: 11.
- <4>[ 54.869781] ld9040 brightness!!! bl_level=149, tune_level=11 curr=12
- <4>[ 54.871002] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.872741] ld9040 ea8868_gamma_ctl 11 11
- <4>[ 54.885528] ld9040 get_gamma_value_from_bl >>> bl_value:142, gamma_value: 11.
- <4>[ 54.885589] ld9040 brightness!!! bl_level=142, tune_level=11 curr=11
- <4>[ 54.902008] ld9040 get_gamma_value_from_bl >>> bl_value:135, gamma_value: 10.
- <4>[ 54.902099] ld9040 brightness!!! bl_level=135, tune_level=10 curr=11
- <4>[ 54.903198] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.905151] ld9040 ea8868_gamma_ctl 10 10
- <4>[ 54.918579] ld9040 get_gamma_value_from_bl >>> bl_value:129, gamma_value: 9.
- <4>[ 54.918640] ld9040 brightness!!! bl_level=129, tune_level=9 curr=10
- <4>[ 54.919586] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.921752] ld9040 ea8868_gamma_ctl 9 9
- <4>[ 54.936706] ld9040 get_gamma_value_from_bl >>> bl_value:122, gamma_value: 9.
- <4>[ 54.936767] ld9040 brightness!!! bl_level=122, tune_level=9 curr=9
- <4>[ 54.952087] ld9040 get_gamma_value_from_bl >>> bl_value:115, gamma_value: 8.
- <4>[ 54.952117] ld9040 brightness!!! bl_level=115, tune_level=8 curr=9
- <4>[ 54.953094] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.954803] ld9040 ea8868_gamma_ctl 8 8
- <4>[ 54.968353] ld9040 get_gamma_value_from_bl >>> bl_value:109, gamma_value: 7.
- <4>[ 54.968414] ld9040 brightness!!! bl_level=109, tune_level=7 curr=8
- <4>[ 54.969085] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 54.970550] ld9040 ea8868_gamma_ctl 7 7
- <4>[ 54.987854] ld9040 get_gamma_value_from_bl >>> bl_value:102, gamma_value: 7.
- <4>[ 54.987884] ld9040 brightness!!! bl_level=102, tune_level=7 curr=7
- <4>[ 55.001800] ld9040 get_gamma_value_from_bl >>> bl_value:95, gamma_value: 6.
- <4>[ 55.001861] ld9040 brightness!!! bl_level=95, tune_level=6 curr=7
- <4>[ 55.002655] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.004211] ld9040 ea8868_gamma_ctl 6 6
- <4>[ 55.018920] ld9040 get_gamma_value_from_bl >>> bl_value:88, gamma_value: 5.
- <4>[ 55.018951] ld9040 brightness!!! bl_level=88, tune_level=5 curr=6
- <4>[ 55.019836] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.021270] ld9040 ea8868_gamma_ctl 5 5
- <4>[ 55.035430] ld9040 get_gamma_value_from_bl >>> bl_value:82, gamma_value: 5.
- <4>[ 55.035491] ld9040 brightness!!! bl_level=82, tune_level=5 curr=5
- <4>[ 55.052642] ld9040 get_gamma_value_from_bl >>> bl_value:75, gamma_value: 4.
- <4>[ 55.052673] ld9040 brightness!!! bl_level=75, tune_level=4 curr=5
- <4>[ 55.053344] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.055541] ld9040 ea8868_gamma_ctl 4 4
- <4>[ 55.069427] ld9040 get_gamma_value_from_bl >>> bl_value:68, gamma_value: 3.
- <4>[ 55.069488] ld9040 brightness!!! bl_level=68, tune_level=3 curr=4
- <4>[ 55.070678] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.072784] ld9040 ea8868_gamma_ctl 3 3
- <4>[ 55.087158] ld9040 get_gamma_value_from_bl >>> bl_value:62, gamma_value: 3.
- <4>[ 55.087249] ld9040 brightness!!! bl_level=62, tune_level=3 curr=3
- <4>[ 55.103302] ld9040 get_gamma_value_from_bl >>> bl_value:55, gamma_value: 2.
- <4>[ 55.103363] ld9040 brightness!!! bl_level=55, tune_level=2 curr=3
- <4>[ 55.104431] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.106872] ld9040 ea8868_gamma_ctl 2 2
- <4>[ 55.120788] ld9040 get_gamma_value_from_bl >>> bl_value:48, gamma_value: 1.
- <4>[ 55.120880] ld9040 brightness!!! bl_level=48, tune_level=1 curr=2
- <4>[ 55.122314] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.124969] ld9040 ea8868_gamma_ctl 1 1
- <4>[ 55.137390] ld9040 get_gamma_value_from_bl >>> bl_value:42, gamma_value: 1.
- <4>[ 55.137481] ld9040 brightness!!! bl_level=42, tune_level=1 curr=1
- <4>[ 55.154418] ld9040 get_gamma_value_from_bl >>> bl_value:35, gamma_value: 0.
- <4>[ 55.154510] ld9040 brightness!!! bl_level=35, tune_level=0 curr=1
- <4>[ 55.155883] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 55.161682] ld9040 ea8868_gamma_ctl 0 0
- <4>[ 55.169677] ld9040 get_gamma_value_from_bl >>> bl_value:28, gamma_value: 0.
- <4>[ 55.169738] ld9040 brightness!!! bl_level=28, tune_level=0 curr=0
- <4>[ 55.186492] ld9040 get_gamma_value_from_bl >>> bl_value:21, gamma_value: 0.
- <4>[ 55.186523] ld9040 brightness!!! bl_level=21, tune_level=0 curr=0
- <4>[ 55.202972] ld9040 get_gamma_value_from_bl >>> bl_value:15, gamma_value: 0.
- <4>[ 55.203033] ld9040 brightness!!! bl_level=15, tune_level=0 curr=0
- <4>[ 55.219787] ld9040 get_gamma_value_from_bl >>> bl_value:10, gamma_value: 0.
- <4>[ 55.219818] ld9040 brightness!!! bl_level=10, tune_level=0 curr=0
- <3>[ 55.706298] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 57.100433] ld9040 get_gamma_value_from_bl >>> bl_value:0, gamma_value: 0.
- <4>[ 57.100494] ld9040 brightness!!! bl_level=0, tune_level=0 curr=0
- <3>[ 57.132202] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
- <4>[ 57.132263] ld9040 lcdc_ld9040_panel_off + (1,1,1)
- <4>[ 57.136810] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <4>[ 57.266387] ld9040 : lcdc_config_gpios [0]
- <4>[ 57.266418] ld9040 start ld9040_disp_powerdown
- <4>[ 57.266448] ld9040 lcdc_ld9040_panel_off -
- <4>[ 57.266479] [kmj] lcdc_LD9040_panel_power:enable:0
- <6>[ 57.272186] request_suspend_state: sleep (0->3) at 57245949109 (2015-10-24 16:54:48.108341445 UTC)
- <6>[ 57.272521] early_suspend: begin
- <6>[ 57.272613] early_suspend: kworker/u:5
- <6>[ 57.272796] early_suspend: call handlers
- <6>[ 57.272888] early_suspend: calling smartass_early_suspend
- <6>[ 57.273040] early_suspend: calling smartass_early_suspend
- <6>[ 57.273162] early_suspend: calling savagedzen_early_suspend
- <6>[ 57.273345] early_suspend: calling ledtrig_sleep_early_suspend
- <6>[ 57.273437] early_suspend: calling sec_touchkey_early_suspend
- <7>[ 57.273620] sec_touchkey_early_suspend
- <6>[ 57.273712] early_suspend: calling ld9040_early_suspend
- <4>[ 57.273803] ld9040 panel off at early_suspend (0,0,0)
- <6>[ 57.273986] early_suspend: calling ebln_early_suspend
- <6>[ 57.274078] early_suspend: calling lazy_early_suspend
- <6>[ 57.274291] early_suspend: calling dhd_early_suspend
- <4>[ 57.274383] dhd_early_suspend: enter
- <4>[ 57.274475] dhd_set_suspend: force extra Suspend setting
- <4>[ 57.289062] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
- <4>[ 57.290679] dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=3 Listen=10
- <6>[ 57.291351] early_suspend: calling stop_drawing_early_suspend
- <6>[ 57.291748] early_suspend: calling kgsl_early_suspend_driver
- <6>[ 57.293243] early_suspend: calling msmfb_early_suspend
- <6>[ 57.293426] early_suspend: calling mdp_early_suspend
- <3>[ 57.293548] dtv_pipe is not configured yet
- <6>[ 57.294006] early_suspend: calling cpufreq_ondemand_early_suspend
- <6>[ 57.294158] early_suspend: calling msmsdcc_early_suspend
- <6>[ 57.294281] early_suspend: calling msmsdcc_early_suspend
- <6>[ 57.294433] early_suspend: calling msmsdcc_early_suspend
- <6>[ 57.294555] early_suspend: calling msmsdcc_early_suspend
- <6>[ 57.294708] early_suspend: calling msmsdcc_early_suspend
- <6>[ 57.297943] early_suspend: calling cpufreq_intellidemand_early_suspend
- <6>[ 57.298156] early_suspend: calling sec_bat_early_suspend
- <6>[ 57.298248] sec_bat_early_suspend...
- <6>[ 57.298431] early_suspend: calling mxt224_early_suspend
- <4>[ 57.298553] mxt224_power_off: enter
- <3>[ 57.298889] [TSP POWER OFF L4 1.8 disable
- <3>[ 57.299316] [TSP POWER OFF L1 3.3 disable
- <4>[ 57.299499] mxt224_power_off is finished
- <3>[ 57.299621] [TSP] mxt224_early_suspend
- <6>[ 57.299713] early_suspend: done
- <6>[ 57.299804] PM: Syncing filesystems...
- <6>[ 57.301177] active wake lock PowerManagerService.Broadcasts
- <6>[ 57.301361] active wake lock usb_bus_active
- <6>[ 57.301452] active wake lock PowerManagerService.WakeLocks
- <6>[ 57.301635] active wake lock vbus_present
- <6>[ 57.301727] active wake lock wlan_rx_wake, time left 40
- <4>[ 57.798522] set_freq_limit: 0x8 0, min 192000, max 1242000
- <6>[ 58.248413] sync done.
- <4>[ 58.499847] CPU1: Booted secondary processor
- <4>[ 58.501007] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <3>[ 58.716369] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 59.142089] msm_otg_irq: 48 callbacks suppressed
- <4>[ 59.142639] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 59.318542] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 59.495361] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 59.671936] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 59.848693] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <7>[ 60.496307] wlan0: no IPv6 routers present
- <3>[ 61.726470] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 61.799560] set_freq_limit: 0x8 0, min 192000, max 1242000
- <4>[ 63.398986] CPU1: Booted secondary processor
- <4>[ 63.400238] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 64.281738] msm_otg_irq: 48 callbacks suppressed
- <4>[ 64.281860] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 64.458587] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 64.635223] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 64.736389] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 64.812316] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 64.989562] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 67.296875] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 67.746307] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 69.411376] msm_otg_irq: 48 callbacks suppressed
- <4>[ 69.411865] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 69.588714] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 69.650299] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
- <4>[ 69.765106] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 69.789367] CPU1: Booted secondary processor
- <4>[ 69.790100] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 69.942199] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 70.119049] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 70.756378] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 73.095062] init: untracked pid 2037 killed by signal 9
- <4>[ 73.118804] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
- <3>[ 73.766510] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 74.541839] msm_otg_irq: 48 callbacks suppressed
- <4>[ 74.541931] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 74.718536] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 74.895294] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 75.071899] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 75.248443] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 76.777740] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 79.668182] msm_otg_irq: 48 callbacks suppressed
- <4>[ 79.668304] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 79.787506] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 79.845031] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 80.021942] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 80.198577] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 80.375152] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 82.796997] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 84.795898] msm_otg_irq: 48 callbacks suppressed
- <4>[ 84.795989] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 84.973052] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 85.149902] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 85.326751] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 85.503540] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 85.807098] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 86.983764] healthd: battery l=96 v=4145 t=29.5 h=2 st=2 chg=u
- <4>[ 87.245697] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <4>[ 88.437896] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 88.816986] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 89.491241] CPU1: Booted secondary processor
- <4>[ 89.492156] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 89.923736] msm_otg_irq: 48 callbacks suppressed
- <4>[ 89.923858] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 90.100250] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 90.276885] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 90.453552] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 90.630584] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 91.827941] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 94.837554] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 95.049133] msm_otg_irq: 48 callbacks suppressed
- <4>[ 95.049713] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 95.225830] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 95.402740] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 95.579498] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 95.756286] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 97.846984] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 100.185607] msm_otg_irq: 48 callbacks suppressed
- <4>[ 100.185729] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 100.362396] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 100.539276] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 100.715911] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 100.857543] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 100.893035] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <7>[ 103.260742] usb: android_work config= (null),connected=1,sw_connected=0
- <6>[ 103.264709] android_work: sent uevent USB_STATE=CONNECTED
- <3>[ 103.866943] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 104.626922] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 105.188720] msm_otg_irq: 46 callbacks suppressed
- <4>[ 105.188842] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 105.365356] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 105.542510] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 105.626953] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 105.719207] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 105.896331] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 106.188903] set_freq_limit: 0x8 0, min 192000, max 1242000
- <6>[ 106.544982] rmt_storage_event_open_cb: open callback received
- <6>[ 106.545196] open partition /q6_fs1_parti_id_0x59 handle=4
- <6>[ 106.546478] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
- <6>[ 106.547729] sdio_al:ch SDIO_SMEM read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120
- <6>[ 106.548339] sdio_al:sdio_open SDIO_SMEM completed OK
- <6>[ 106.550048] rmt_storage_event_user_data_cb: send user data callback received
- <6>[ 106.550964] rmt_storage_event_open_cb: open callback received
- <6>[ 106.551177] open partition /q6_fs2_parti_id_0x5A handle=5
- <6>[ 106.552215] rmt_storage_event_user_data_cb: send user data callback received
- <6>[ 106.553131] rmt_storage_event_open_cb: open callback received
- <6>[ 106.553253] open partition /q6_fsg_parti_id_0x5B handle=6
- <6>[ 106.554351] rmt_storage_event_user_data_cb: send user data callback received
- <3>[ 106.626892] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <6>[ 106.639190] rmt_storage_event_write_iovec_cb: write iovec callback received
- <6>[ 106.764862] rmt_storage_ioctl: send status ioctl
- <3>[ 106.877380] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 107.390594] CPU1: Booted secondary processor
- <4>[ 107.391540] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <3>[ 107.626892] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <3>[ 108.626892] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 108.646545] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <3>[ 109.626922] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <3>[ 109.886932] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 110.317932] msm_otg_irq: 48 callbacks suppressed
- <4>[ 110.318084] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 110.494842] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 110.626922] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 110.671630] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 110.848632] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 111.025421] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 111.627044] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 112.389678] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 112.896972] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 114.276947] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 114.360443] k3dh_read_accel_xyz: data=(-2, 11, 1036) cal=(-35, -6, 10)
- <3>[ 115.367004] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 115.421356] msm_otg_irq: 46 callbacks suppressed
- <4>[ 115.421905] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 115.598419] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 115.775238] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 115.907409] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 115.952209] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 116.147766] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 117.127105] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- <3>[ 118.147125] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <3>[ 118.917022] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 120.106903] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 120.534271] msm_otg_irq: 44 callbacks suppressed
- <4>[ 120.534393] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 120.710968] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 120.897125] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 121.077911] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 121.106933] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 121.256256] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 121.929199] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 124.939239] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 125.631591] msm_otg_irq: 44 callbacks suppressed
- <4>[ 125.632141] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 125.828063] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 126.006317] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 126.189849] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 126.433166] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 127.424743] healthd: battery l=96 v=4202 t=29.9 h=2 st=2 chg=u
- <3>[ 127.949005] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 129.957092] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 130.646240] msm_otg_irq: 42 callbacks suppressed
- <4>[ 130.646789] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 130.921813] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 130.959197] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 131.117095] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 131.302185] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 131.507141] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 133.969146] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 135.757049] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 135.815368] msm_otg_irq: 44 callbacks suppressed
- <4>[ 135.815948] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 135.994232] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 136.249969] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 136.467163] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 136.669860] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 136.977478] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 137.527069] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <3>[ 139.437103] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <3>[ 139.989227] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 140.854003] msm_otg_irq: 40 callbacks suppressed
- <4>[ 140.854583] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 141.038726] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 141.231475] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 141.512634] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 141.690216] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 142.999176] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 145.942993] msm_otg_irq: 38 callbacks suppressed
- <4>[ 145.943939] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 146.009155] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 146.119720] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 146.302307] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 146.480010] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 146.726867] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 149.017120] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 151.057464] msm_otg_irq: 38 callbacks suppressed
- <4>[ 151.057678] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 151.234375] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 151.326904] ept_prime_timer_func(): ept0in prime failed. ept: config: 20400000active: 5dfe9020 next: 1 info: 128080
- <4>[ 151.418273] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 151.616729] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 151.949371] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 152.027008] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 155.039154] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 156.091461] msm_otg_irq: 28 callbacks suppressed
- <4>[ 156.092407] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 156.268493] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 156.490600] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 156.916534] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <4>[ 157.546813] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <3>[ 158.047424] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 161.057434] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 161.247131] msm_otg_irq: 14 callbacks suppressed
- <4>[ 161.248077] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <4>[ 161.818145] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <3>[ 164.067413] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 167.077026] MSM_THERMAL: Unable to read tsens sensor #0
- <6>[ 167.581207] sec_check_chgcurrent : UI full state? 2734, 1
- <6>[ 167.581787] sec_check_chgcurrent : full state? 2734, 1
- <4>[ 167.604675] healthd: battery l=96 v=4202 t=29.0 h=2 st=2 chg=u
- <3>[ 170.087097] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 173.097167] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 176.107421] MSM_THERMAL: Unable to read tsens sensor #0
- <6>[ 176.885742] request_suspend_state: wakeup (3->0) at 176858858595 (2015-10-24 16:56:47.380699230 UTC)
- <6>[ 176.885925] late_resume: begin
- <6>[ 176.886108] late_resume: call handlers
- <6>[ 176.886230] late_resume: calling mxt224_late_resume
- <4>[ 176.886413] mxt224_power_on: enter
- <3>[ 176.888275] [TSP POWER ON L1 3.3 enable
- <3>[ 176.888610] [TSP POWER ON L4 1.8 enable
- <4>[ 176.888732] mxt224_power_on: exit
- <4>[ 176.946990] mxt224_power_on is finished
- <3>[ 176.947143] [TSP] ta_status in (mxt224_late_resume) is 1
- <3>[ 176.947357] [TSP] mxt224_ta_probe
- <3>[ 176.956146] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <3>[ 176.956726] [TSP]calibration success!!!
- <3>[ 176.957000] [TSP] mxt224_late_resume
- <6>[ 176.957122] late_resume: calling sec_bat_late_resume
- <6>[ 176.957214] sec_bat_late_resume...
- <6>[ 176.957397] late_resume: calling cpufreq_intellidemand_late_resume
- <6>[ 176.957519] late_resume: calling msmsdcc_late_resume
- <6>[ 176.957733] late_resume: calling msmsdcc_late_resume
- <6>[ 176.957824] late_resume: calling msmsdcc_late_resume
- <6>[ 176.958007] late_resume: calling msmsdcc_late_resume
- <6>[ 176.958129] late_resume: calling msmsdcc_late_resume
- <6>[ 176.958251] late_resume: calling cpufreq_ondemand_late_resume
- <3>[ 176.958465] [TSP] Calibration End!!!!!!
- <3>[ 176.958557] [TSP] Clearing unused slots
- <6>[ 176.959228] late_resume: calling mdp_early_resume
- <6>[ 176.959350] late_resume: calling msmfb_early_resume
- <6>[ 176.959472] late_resume: calling kgsl_late_resume_driver
- <3>[ 176.961822] [TSP] Calibration End!!!!!!
- <3>[ 176.961944] [TSP] Clearing unused slots
- <3>[ 176.989227] [TSP] Calibration!!!!!!
- <6>[ 176.997589] late_resume: calling start_drawing_late_resume
- <6>[ 176.997833] late_resume: calling dhd_late_resume
- <4>[ 176.998016] dhd_late_resume: enter
- <4>[ 176.998138] dhd_set_suspend: Remove extra suspend setting
- <4>[ 177.004943] [kmj] lcdc_LD9040_panel_power:enable:1
- <4>[ 177.015472] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- <4>[ 177.015502] ld9040 : lcdc_config_gpios [1]
- <4>[ 177.015502] ld9040 start spi_init
- <4>[ 177.015533] ld9040 clk : 103, cs : 104, sdi : 106
- <4>[ 177.015563] ld9040 start ld9040_disp_powerup
- <3>[ 177.017364] [TSP] Calibration End!!!!!!
- <3>[ 177.017395] [TSP] Clearing unused slots
- <6>[ 177.064208] late_resume: calling lazy_late_resume
- <6>[ 177.064270] late_resume: calling ebln_late_resume
- <6>[ 177.064300] late_resume: calling ld9040_late_resume
- <4>[ 177.064422] ld9040 panel on at late_resume (0,0,0)
- <4>[ 177.066986] ld9040 start ld9040_disp_on - HW Rev: 13
- <4>[ 177.069458] ld9040 LCD_M3 : 1
- <4>[ 177.069885] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 177.071258] ld9040 ea8868_gamma_ctl 10 10
- <4>[ 177.071380] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- <6>[ 177.072357] late_resume: calling sec_touchkey_early_resume
- <7>[ 177.072387] [TKEY] sec_touchkey_early_resume
- <4>[ 177.072479] [TKEY] tkey_vdd_enable: enter
- <7>[ 177.072509] gpio_request: gpio-157 (TKEY_SCL) status -16
- <7>[ 177.072540] gpio_request: gpio-156 (TKEY_SDA) status -16
- <4>[ 177.072631] tkey_led_vdd_enable 1
- <6>[ 177.072662] late_resume: calling ledtrig_sleep_early_resume
- <6>[ 177.072723] late_resume: calling savagedzen_late_resume
- <6>[ 177.072753] late_resume: calling smartass_late_resume
- <6>[ 177.072784] late_resume: calling smartass_late_resume
- <6>[ 177.072845] late_resume: done
- <4>[ 177.075103] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 177.075134] mdp4_csc_config: Block type 8 isn't supported by CSC.
- <6>[ 177.082946] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
- <6>[ 177.083038] hdmi_msm hdmi_msm.1: hdmi_common_wta_hpd: '1'
- <6>[ 177.091003] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 59080000
- <4>[ 177.429687] CPU1: Booted secondary processor
- <4>[ 177.430633] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 177.557098] ld9040 get_gamma_value_from_bl >>> bl_value:250, gamma_value: 22.
- <4>[ 177.557128] ld9040 brightness!!! bl_level=255, tune_level=22 curr=10
- <4>[ 177.557830] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 177.559356] ld9040 ea8868_gamma_ctl 22 22
- <4>[ 177.627899] [TKEY] enter touchkey_auto_calibration
- <7>[ 178.496063] [TSP] ID-0,UD:1
- <3>[ 178.520782] [TSP] t: 5, a: 0
- <7>[ 178.542602] [TSP] ID-0,UD:2
- <3>[ 178.567352] [TSP] t: 5, a: 0
- <7>[ 178.569396] [TSP] ID-0,UD:2
- <3>[ 178.591491] [TSP] t: 5, a: 0
- <7>[ 178.593505] [TSP] ID-0,UD:2
- <3>[ 178.615600] [TSP] t: 5, a: 0
- <7>[ 178.617675] [TSP] ID-0,UD:2
- <3>[ 178.639801] [TSP] t: 4, a: 0
- <7>[ 178.641815] [TSP] ID-0,UD:2
- <3>[ 178.663909] [TSP] t: 4, a: 0
- <7>[ 178.665985] [TSP] ID-0,UD:2
- <3>[ 178.688049] [TSP] t: 6, a: 0
- <7>[ 178.690093] [TSP] ID-0,UD:2
- <3>[ 178.712158] [TSP] t: 3, a: 0
- <7>[ 178.714263] [TSP] ID-0,UD:2
- <3>[ 178.736358] [TSP] t: 0, a: 0
- <3>[ 178.736877] [TSP] calibration was not decided yet
- <7>[ 178.738555] [TSP] ID-0,UD:2
- <3>[ 178.760589] [TSP] t: 0, a: 0
- <3>[ 178.761138] [TSP] calibration was not decided yet
- <7>[ 178.762725] [TSP] ID-0,UD:0
- <3>[ 179.117797] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 179.530212] set_freq_limit: 0x8 0, min 192000, max 1242000
- <7>[ 179.539215] [TSP] ID-0,UD:1
- <3>[ 179.561950] [TSP] t: 4, a: 0
- <7>[ 179.583587] [TSP] ID-0,UD:2
- <3>[ 179.608306] [TSP] t: 5, a: 0
- <7>[ 179.610382] [TSP] ID-0,UD:2
- <3>[ 179.632446] [TSP] t: 4, a: 0
- <7>[ 179.634490] [TSP] ID-0,UD:2
- <3>[ 179.656585] [TSP] t: 5, a: 0
- <7>[ 179.658691] [TSP] ID-0,UD:2
- <3>[ 179.680725] [TSP] t: 5, a: 0
- <7>[ 179.682800] [TSP] ID-0,UD:2
- <3>[ 179.704864] [TSP] t: 4, a: 0
- <7>[ 179.707000] [TSP] ID-0,UD:2
- <3>[ 179.731719] [TSP] t: 4, a: 0
- <7>[ 179.733764] [TSP] ID-0,UD:2
- <3>[ 179.755828] [TSP] t: 2, a: 0
- <7>[ 179.757934] [TSP] ID-0,UD:2
- <3>[ 179.779998] [TSP] t: 0, a: 0
- <3>[ 179.780548] [TSP] calibration was not decided yet
- <7>[ 179.782196] [TSP] ID-0,UD:2
- <3>[ 179.806945] [TSP] t: 0, a: 0
- <3>[ 179.807495] [TSP] calibration was not decided yet
- <7>[ 179.809082] [TSP] ID-0,UD:0
- <4>[ 179.829803] CPU1: Booted secondary processor
- <4>[ 179.831024] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 181.877655] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 182.127044] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 182.178344] dhd_wl_ioctl: WLC_SET_VAR: pkt_filter_add, ret = -2
- <7>[ 182.448547] [TSP] ID-0,UD:1
- <3>[ 182.470672] [TSP] t: 6, a: 0
- <7>[ 182.599700] [TSP] ID-0,UD:0
- <6>[ 182.993682] [pcm_out.c:pcm_out_open] open
- <6>[ 182.999114] apr_tal: SMD_EVENT_OPEN
- <6>[ 183.005584] [pcm_out.c:pcm_out_open] open session id[1]
- <4>[ 183.040466] CPU1: Booted secondary processor
- <4>[ 183.042144] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <6>[ 183.054595] msm_device_put:device speaker_rx set 1
- <6>[ 183.054718] Device speaker_rx Opened = 0
- <3>[ 183.054931] msm_device_put:device freq =48000
- <6>[ 183.055053] Device trying to open : speaker_rx
- <6>[ 183.087341] afe_open: 0 48000
- <6>[ 183.114471] msm_snddev_poweramp_on: enable stereo spkr amp
- <6>[ 183.114624] yda165_avdd_power_on : amp_reg_ref_cnt = 1
- <6>[ 183.115386] YDA165 AVDD set to 2.6V for 13 revison.
- <6>[ 183.115509] yda165:speaker on[cur_mode:0]
- <4>[ 183.119415] Last active Open Txdev (-1) and Rxdev(2)
- <6>[ 183.137908] pcm_out_ioctl: AUDIO_START
- <3>[ 183.231811] mdp4_overlay_pipe_alloc: ptype=1 FAILED
- <3>[ 183.231994] mdp4_overlay_req2pipe: pipe == NULL!
- <3>[ 183.232086] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
- <3>[ 183.232208] msmfb_overlay_set: ioctl failed, rc=-12
- <3>[ 183.248718] mdp4_overlay_pipe_alloc: ptype=1 FAILED
- <3>[ 183.248840] mdp4_overlay_req2pipe: pipe == NULL!
- <3>[ 183.249023] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
- <3>[ 183.249114] msmfb_overlay_set: ioctl failed, rc=-12
- <3>[ 183.266204] mdp4_overlay_pipe_alloc: ptype=1 FAILED
- <3>[ 183.266387] mdp4_overlay_req2pipe: pipe == NULL!
- <3>[ 183.266571] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
- <3>[ 183.266876] msmfb_overlay_set: ioctl failed, rc=-12
- <3>[ 183.283050] mdp4_overlay_pipe_alloc: ptype=1 FAILED
- <3>[ 183.283355] mdp4_overlay_req2pipe: pipe == NULL!
- <3>[ 183.283538] mdp4_overlay_set: mdp4_overlay_req2pipe, ret=-12
- <3>[ 183.283905] msmfb_overlay_set: ioctl failed, rc=-12
- <4>[ 184.639007] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 185.138061] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 185.340057] CPU1: Booted secondary processor
- <4>[ 185.341003] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <6>[ 186.165313] msm_device_put:device speaker_rx set 0
- <6>[ 186.165588] msm_snddev_poweramp_off: disable stereo spkr amp
- <6>[ 186.165924] yda165:speaker off
- <6>[ 186.197143] yda165_avdd_power_off : amp_reg_ref_cnt = 0
- <6>[ 186.216827] msm_device_put:device speaker_tx set 0
- <6>[ 186.221466] [pcm_out.c:pcm_out_release] release session id[1]
- <4>[ 186.660217] set_freq_limit: 0x8 0, min 192000, max 1242000
- <7>[ 187.760375] [TSP] ID-0,UD:1
- <3>[ 187.782501] [TSP] t: 4, a: 0
- <3>[ 187.783111] [TSP] calibration was good
- <3>[ 187.784942] [TSP] Clearing unused slots
- <7>[ 187.805999] [TSP] ID-0,UD:2
- <7>[ 187.821411] [TSP] ID-0,UD:2
- <7>[ 187.836822] [TSP] ID-0,UD:2
- <7>[ 187.852264] [TSP] ID-0,UD:2
- <7>[ 187.867645] [TSP] ID-0,UD:2
- <7>[ 187.883026] [TSP] ID-0,UD:2
- <7>[ 187.898498] [TSP] ID-0,UD:2
- <7>[ 187.913909] [TSP] ID-0,UD:2
- <7>[ 187.929321] [TSP] ID-0,UD:2
- <7>[ 187.944763] [TSP] ID-0,UD:2
- <7>[ 187.960205] [TSP] ID-0,UD:2
- <7>[ 187.975616] [TSP] ID-0,UD:2
- <7>[ 188.007324] [TSP] ID-0,UD:2
- <7>[ 188.038208] [TSP] ID-0,UD:2
- <7>[ 188.112457] [TSP] ID-0,UD:0
- <3>[ 188.147155] MSM_THERMAL: Unable to read tsens sensor #0
- <7>[ 188.462615] [TSP] ID-0,UD:1
- <7>[ 188.629974] [TSP] ID-0,UD:0
- <6>[ 188.674224] [pcm_out.c:pcm_out_open] open
- <6>[ 188.685913] [pcm_out.c:pcm_out_open] open session id[1]
- <6>[ 188.692687] msm_device_put:device speaker_rx set 1
- <6>[ 188.692810] Device speaker_rx Opened = 0
- <3>[ 188.692932] msm_device_put:device freq =48000
- <6>[ 188.693176] Device trying to open : speaker_rx
- <4>[ 188.709594] CPU1: Booted secondary processor
- <4>[ 188.710784] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <6>[ 188.717315] afe_open: 0 48000
- <6>[ 188.742004] msm_snddev_poweramp_on: enable stereo spkr amp
- <6>[ 188.742218] yda165_avdd_power_on : amp_reg_ref_cnt = 1
- <6>[ 188.742614] YDA165 AVDD set to 2.6V for 13 revison.
- <6>[ 188.742797] yda165:speaker on[cur_mode:0]
- <4>[ 188.746734] Last active Open Txdev (-1) and Rxdev(2)
- <6>[ 188.762115] pcm_out_ioctl: AUDIO_START
- <3>[ 191.156951] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 191.609069] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 191.684692] init: untracked pid 3809 exited with status 209
- <6>[ 191.787078] msm_device_put:device speaker_rx set 0
- <6>[ 191.787322] msm_snddev_poweramp_off: disable stereo spkr amp
- <6>[ 191.787445] yda165:speaker off
- <6>[ 191.826965] yda165_avdd_power_off : amp_reg_ref_cnt = 0
- <6>[ 191.846069] msm_device_put:device speaker_tx set 0
- <6>[ 191.850402] [pcm_out.c:pcm_out_release] release session id[1]
- <3>[ 192.049987] init: untracked pid 3811 exited with status 0
- <7>[ 192.348663] [TSP] ID-0,UD:1
- <7>[ 192.467620] [TSP] ID-0,UD:0
- <6>[ 192.479461] [pcm_out.c:pcm_out_open] open
- <6>[ 192.491302] [pcm_out.c:pcm_out_open] open session id[1]
- <6>[ 192.498046] msm_device_put:device speaker_rx set 1
- <6>[ 192.498199] Device speaker_rx Opened = 0
- <3>[ 192.498321] msm_device_put:device freq =48000
- <6>[ 192.498565] Device trying to open : speaker_rx
- <6>[ 192.528839] afe_open: 0 48000
- <6>[ 192.553344] msm_snddev_poweramp_on: enable stereo spkr amp
- <6>[ 192.553527] yda165_avdd_power_on : amp_reg_ref_cnt = 1
- <6>[ 192.553863] YDA165 AVDD set to 2.6V for 13 revison.
- <6>[ 192.554077] yda165:speaker on[cur_mode:0]
- <4>[ 192.557983] Last active Open Txdev (-1) and Rxdev(2)
- <6>[ 192.573242] pcm_out_ioctl: AUDIO_START
- <4>[ 193.951110] CPU1: Booted secondary processor
- <4>[ 193.952117] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <3>[ 194.167053] MSM_THERMAL: Unable to read tsens sensor #0
- <7>[ 194.522369] [TSP] ID-0,UD:1
- <7>[ 194.584075] [TSP] ID-0,UD:2
- <7>[ 194.599487] [TSP] ID-0,UD:2
- <7>[ 194.615539] [TSP] ID-0,UD:2
- <7>[ 194.630981] [TSP] ID-0,UD:2
- <7>[ 194.646362] [TSP] ID-0,UD:2
- <7>[ 194.661743] [TSP] ID-0,UD:2
- <7>[ 194.677124] [TSP] ID-0,UD:2
- <7>[ 194.692535] [TSP] ID-0,UD:2
- <7>[ 194.735961] [TSP] ID-0,UD:0
- <6>[ 195.598724] msm_device_put:device speaker_rx set 0
- <6>[ 195.598876] msm_snddev_poweramp_off: disable stereo spkr amp
- <6>[ 195.599090] yda165:speaker off
- <6>[ 195.637390] yda165_avdd_power_off : amp_reg_ref_cnt = 0
- <6>[ 195.651184] msm_device_put:device speaker_tx set 0
- <6>[ 195.655731] [pcm_out.c:pcm_out_release] release session id[1]
- <4>[ 196.050231] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 197.177673] MSM_THERMAL: Unable to read tsens sensor #0
- <3>[ 200.187774] MSM_THERMAL: Unable to read tsens sensor #0
- <7>[ 200.807586] [TSP] ID-0,UD:1
- <7>[ 200.926269] [TSP] ID-0,UD:0
- <6>[ 200.933868] [pcm_out.c:pcm_out_open] open
- <6>[ 200.945800] [pcm_out.c:pcm_out_open] open session id[1]
- <6>[ 200.952941] msm_device_put:device speaker_rx set 1
- <6>[ 200.953094] Device speaker_rx Opened = 0
- <3>[ 200.953338] msm_device_put:device freq =48000
- <6>[ 200.953460] Device trying to open : speaker_rx
- <6>[ 200.978210] afe_open: 0 48000
- <6>[ 201.002532] msm_snddev_poweramp_on: enable stereo spkr amp
- <6>[ 201.002655] yda165_avdd_power_on : amp_reg_ref_cnt = 1
- <6>[ 201.003051] YDA165 AVDD set to 2.6V for 13 revison.
- <6>[ 201.003173] yda165:speaker on[cur_mode:0]
- <4>[ 201.007110] Last active Open Txdev (-1) and Rxdev(2)
- <6>[ 201.022674] pcm_out_ioctl: AUDIO_START
- <3>[ 203.198364] MSM_THERMAL: Unable to read tsens sensor #0
- <7>[ 203.356140] [TSP] ID-0,UD:1
- <7>[ 203.401306] [TSP] ID-0,UD:2
- <7>[ 203.416687] [TSP] ID-0,UD:2
- <7>[ 203.432128] [TSP] ID-0,UD:2
- <7>[ 203.447540] [TSP] ID-0,UD:2
- <7>[ 203.463531] [TSP] ID-0,UD:2
- <7>[ 203.479034] [TSP] ID-0,UD:2
- <7>[ 203.494415] [TSP] ID-0,UD:2
- <7>[ 203.509765] [TSP] ID-0,UD:2
- <7>[ 203.525146] [TSP] ID-0,UD:2
- <7>[ 203.540527] [TSP] ID-0,UD:2
- <7>[ 203.555969] [TSP] ID-0,UD:2
- <7>[ 203.571350] [TSP] ID-0,UD:2
- <7>[ 203.586791] [TSP] ID-0,UD:2
- <7>[ 203.602203] [TSP] ID-0,UD:2
- <7>[ 203.617584] [TSP] ID-0,UD:2
- <7>[ 203.632965] [TSP] ID-0,UD:2
- <7>[ 203.649261] [TSP] ID-0,UD:2
- <4>[ 203.660095] CPU1: Booted secondary processor
- <4>[ 203.661071] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <7>[ 203.664642] [TSP] ID-0,UD:2
- <7>[ 203.680053] [TSP] ID-0,UD:2
- <7>[ 203.695404] [TSP] ID-0,UD:2
- <7>[ 203.710815] [TSP] ID-0,UD:2
- <7>[ 203.726196] [TSP] ID-0,UD:2
- <7>[ 203.741638] [TSP] ID-0,UD:2
- <7>[ 203.757080] [TSP] ID-0,UD:2
- <7>[ 203.772491] [TSP] ID-0,UD:2
- <7>[ 203.787902] [TSP] ID-0,UD:2
- <7>[ 203.803283] [TSP] ID-0,UD:2
- <7>[ 203.846984] [TSP] ID-0,UD:0
- <6>[ 204.049255] msm_device_put:device speaker_rx set 0
- <6>[ 204.049835] msm_snddev_poweramp_off: disable stereo spkr amp
- <6>[ 204.050720] yda165:speaker off
- <6>[ 204.087707] yda165_avdd_power_off : amp_reg_ref_cnt = 0
- <6>[ 204.106872] msm_device_put:device speaker_tx set 0
- <6>[ 204.111816] [pcm_out.c:pcm_out_release] release session id[1]
- <4>[ 205.210784] set_freq_limit: 0x8 0, min 192000, max 1242000
- <7>[ 205.571228] [TSP] ID-0,UD:1
- <7>[ 205.706298] [TSP] ID-0,UD:0
- <6>[ 205.714996] [pcm_out.c:pcm_out_open] open
- <6>[ 205.726898] [pcm_out.c:pcm_out_open] open session id[1]
- <6>[ 205.733795] msm_device_put:device speaker_rx set 1
- <6>[ 205.734039] Device speaker_rx Opened = 0
- <3>[ 205.734161] msm_device_put:device freq =48000
- <6>[ 205.734313] Device trying to open : speaker_rx
- <6>[ 205.759399] afe_open: 0 48000
- <6>[ 205.783813] msm_snddev_poweramp_on: enable stereo spkr amp
- <6>[ 205.783996] yda165_avdd_power_on : amp_reg_ref_cnt = 1
- <6>[ 205.784393] YDA165 AVDD set to 2.6V for 13 revison.
- <6>[ 205.784515] yda165:speaker on[cur_mode:0]
- <4>[ 205.788543] Last active Open Txdev (-1) and Rxdev(2)
- <6>[ 205.804077] pcm_out_ioctl: AUDIO_START
- <3>[ 206.208007] MSM_THERMAL: Unable to read tsens sensor #0
- <4>[ 206.264831] CPU1: Booted secondary processor
- <4>[ 206.266082] set_freq_limit: 0x8 -1, min 192000, max 1890000
- <4>[ 207.719848] healthd: battery l=96 v=4153 t=29.8 h=2 st=2 chg=u
- <7>[ 208.082031] [TSP] ID-0,UD:1
- <7>[ 208.187225] [TSP] ID-0,UD:0
- <4>[ 208.760742] set_freq_limit: 0x8 0, min 192000, max 1242000
- <3>[ 209.217742] MSM_THERMAL: Unable to read tsens sensor #0
- <7>[ 209.495391] [TSP] ID-0,UD:1
- <7>[ 209.600280] [TSP] ID-0,UD:0
- <7>[ 210.936523] [TSP] ID-0,UD:1
- <7>[ 211.025177] [TSP] ID-0,UD:0
- <7>[ 211.957977] [TSP] ID-0,UD:1
- <7>[ 212.032318] [TSP] ID-0,UD:0
Add Comment
Please, Sign In to add comment