API tools faq
paste
Guest User

Untitled

a guest
May 3rd, 2020
40
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.19 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2020.07-rc1-00009-g6864fc8704 (May 03 2020 - 12:04:57 -0300)
  2.  
  3. CPU: Freescale i.MX8MP rev1.0 at 1000 MHz
  4. Reset cause: POR
  5. Model: NXP i.MX8MPlus EVK board
  6. DRAM: 6 GiB
  7. MMC: FSL_SDHC: 1, FSL_SDHC: 2
  8. Loading Environment from MMC... OK
  9. In: serial
  10. Out: serial
  11. Err: serial
  12. Net: No ethernet found.
  13. Hit any key to stop autoboot: 0
  14. switch to partitions #0, OK
  15. mmc1 is current device
  16. 27662848 bytes read in 1188 ms (22.2 MiB/s)
  17. Booting from mmc ...
  18. 57795 bytes read in 17 ms (3.2 MiB/s)
  19. ## Flattened Device Tree blob at 43000000
  20. Booting using the fdt blob at 0x43000000
  21. Using Device Tree in place at 0000000043000000, end 00000000430111c2
  22. Found /cpus/cpu@0 node
  23. Remove /cpus/cpu@0:cpu-idle-states
  24. Found /cpus/cpu@1 node
  25. Remove /cpus/cpu@1:cpu-idle-states
  26. Found /cpus/cpu@2 node
  27. Remove /cpus/cpu@2:cpu-idle-states
  28. Found /cpus/cpu@3 node
  29. Remove /cpus/cpu@3:cpu-idle-states
  30.  
  31. Starting kernel ...
  32.  
  33. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  34. [ 0.000000] Linux version 5.4.3-2.0.0+gfd263a3edd95 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Sat Mar 14 15:23:05 UTC 2020
  35. [ 0.000000] Machine model: FSL i.MX8MP EVK
  36. [ 0.000000] efi: Getting EFI parameters from FDT:
  37. [ 0.000000] efi: UEFI not found.
  38. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c4000000, size 960 MiB
  39. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  40. [ 0.000000] NUMA: No NUMA configuration found
  41. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff]
  42. [ 0.000000] NUMA: NODE_DATA [mem 0x1bf3c5500-0x1bf3c6fff]
  43. [ 0.000000] Zone ranges:
  44. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  45. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
  46. [ 0.000000] Movable zone start for each node
  47. [ 0.000000] Early memory node ranges
  48. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000923fffff]
  49. [ 0.000000] node 0: [mem 0x0000000094400000-0x00000001bfffffff]
  50. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff]
  51. [ 0.000000] psci: probing for conduit method from DT.
  52. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  53. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  54. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  55. [ 0.000000] psci: SMC Calling Convention v1.1
  56. [ 0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304
  57. [ 0.000000] Detected VIPT I-cache on CPU0
  58. [ 0.000000] CPU features: detected: ARM erratum 845719
  59. [ 0.000000] CPU features: detected: GIC system register CPU interface
  60. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  61. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1540096
  62. [ 0.000000] Policy zone: Normal
  63. [ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk1p2 rootwait rw
  64. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  65. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  66. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  67. [ 0.000000] software IO TLB: mapped [mem 0xc0000000-0xc4000000] (64MB)
  68. [ 0.000000] Memory: 5058112K/6258688K available (16316K kernel code, 1350K rwdata, 6380K rodata, 2880K init, 1015K bss, 217536K reserved, 983040K cma-reserved)
  69. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  70. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  71. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  72. [ 0.000000] Tasks RCU enabled.
  73. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  74. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  75. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  76. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  77. [ 0.000000] GICv3: 160 SPIs implemented
  78. [ 0.000000] GICv3: 0 Extended SPIs implemented
  79. [ 0.000000] GICv3: Distributor has no Range Selector support
  80. [ 0.000000] GICv3: 16 PPIs implemented
  81. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  82. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
  83. [ 0.000000] ITS: No ITS available, not enabling LPIs
  84. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
  85. [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
  86. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
  87. [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
  88. [ 0.000537] Console: colour dummy device 80x25
  89. [ 0.000602] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
  90. [ 0.000611] pid_max: default: 32768 minimum: 301
  91. [ 0.000687] LSM: Security Framework initializing
  92. [ 0.000758] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  93. [ 0.000785] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  94. [ 0.023970] ASID allocator initialised with 32768 entries
  95. [ 0.031966] rcu: Hierarchical SRCU implementation.
  96. [ 0.041207] EFI services will not be available.
  97. [ 0.047999] smp: Bringing up secondary CPUs ...
  98. [ 0.080144] Detected VIPT I-cache on CPU1
  99. [ 0.080170] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
  100. [ 0.080199] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  101. [ 0.112177] Detected VIPT I-cache on CPU2
  102. [ 0.112195] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
  103. [ 0.112213] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  104. [ 0.144232] Detected VIPT I-cache on CPU3
  105. [ 0.144249] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
  106. [ 0.144266] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  107. [ 0.144331] smp: Brought up 1 node, 4 CPUs
  108. [ 0.144353] SMP: Total of 4 processors activated.
  109. [ 0.144359] CPU features: detected: 32-bit EL0 Support
  110. [ 0.144365] CPU features: detected: CRC32 instructions
  111. [ 0.151403] CPU: All CPU(s) started at EL2
  112. [ 0.151427] alternatives: patching kernel code
  113. [ 0.153518] devtmpfs: initialized
  114. [ 0.162327] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  115. [ 0.162344] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  116. [ 0.187724] pinctrl core: initialized pinctrl subsystem
  117. [ 0.188509] DMI not present or invalid.
  118. [ 0.188756] NET: Registered protocol family 16
  119. [ 0.195574] DMA: preallocated 256 KiB pool for atomic allocations
  120. [ 0.195599] audit: initializing netlink subsys (disabled)
  121. [ 0.195825] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
  122. [ 0.196792] cpuidle: using governor menu
  123. [ 0.197397] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [ 0.198433] Serial: AMBA PL011 UART driver
  125. [ 0.198494] imx mu driver is registered.
  126. [ 0.198513] imx rpmsg driver is registered.
  127. [ 0.203758] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
  128. [ 0.232392] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  129. [ 0.232419] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  130. [ 0.232425] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  131. [ 0.232431] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  132. [ 0.234200] cryptd: max_cpu_qlen set to 1000
  133. [ 0.240127] ACPI: Interpreter disabled.
  134. [ 0.241470] iommu: Default domain type: Translated
  135. [ 0.241610] vgaarb: loaded
  136. [ 0.241910] SCSI subsystem initialized
  137. [ 0.242245] usbcore: registered new interface driver usbfs
  138. [ 0.242282] usbcore: registered new interface driver hub
  139. [ 0.242342] usbcore: registered new device driver usb
  140. [ 0.243694] mc: Linux media interface: v0.10
  141. [ 0.243720] videodev: Linux video capture interface: v2.00
  142. [ 0.243784] pps_core: LinuxPPS API ver. 1 registered
  143. [ 0.243789] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  144. [ 0.243803] PTP clock support registered
  145. [ 0.243981] EDAC MC: Ver: 3.0.0
  146. [ 0.244938] No BMan portals available!
  147. [ 0.245218] QMan: Allocated lookup table at (____ptrval____), entry count 65537
  148. [ 0.245607] No QMan portals available!
  149. [ 0.246184] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
  150. [ 0.246683] FPGA manager framework
  151. [ 0.246762] Advanced Linux Sound Architecture Driver Initialized.
  152. [ 0.247180] Bluetooth: Core ver 2.22
  153. [ 0.247207] NET: Registered protocol family 31
  154. [ 0.247212] Bluetooth: HCI device and connection manager initialized
  155. [ 0.247221] Bluetooth: HCI socket layer initialized
  156. [ 0.247228] Bluetooth: L2CAP socket layer initialized
  157. [ 0.247241] Bluetooth: SCO socket layer initialized
  158. [ 0.248045] clocksource: Switched to clocksource arch_sys_counter
  159. [ 0.248206] VFS: Disk quotas dquot_6.6.0
  160. [ 0.248257] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  161. [ 0.248428] pnp: PnP ACPI: disabled
  162. [ 0.254759] thermal_sys: Registered thermal governor 'step_wise'
  163. [ 0.254763] thermal_sys: Registered thermal governor 'power_allocator'
  164. [ 0.255172] NET: Registered protocol family 2
  165. [ 0.255494] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  166. [ 0.255593] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  167. [ 0.256109] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  168. [ 0.257096] TCP: Hash tables configured (established 65536 bind 65536)
  169. [ 0.257237] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  170. [ 0.257409] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  171. [ 0.257725] NET: Registered protocol family 1
  172. [ 0.258146] RPC: Registered named UNIX socket transport module.
  173. [ 0.258152] RPC: Registered udp transport module.
  174. [ 0.258157] RPC: Registered tcp transport module.
  175. [ 0.258161] RPC: Registered tcp NFSv4.1 backchannel transport module.
  176. [ 0.258544] PCI: CLS 0 bytes, default 64
  177. [ 0.259436] kvm [1]: IPA Size Limit: 40bits
  178. [ 0.260140] kvm [1]: GICv3: no GICV resource entry
  179. [ 0.260146] kvm [1]: disabling GICv2 emulation
  180. [ 0.260163] kvm [1]: GIC system register CPU interface enabled
  181. [ 0.260240] kvm [1]: vgic interrupt IRQ1
  182. [ 0.260330] kvm [1]: Hyp mode initialized successfully
  183. [ 0.265956] Initialise system trusted keyrings
  184. [ 0.266073] workingset: timestamp_bits=44 max_order=21 bucket_order=0
  185. [ 0.272313] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  186. [ 0.272957] NFS: Registering the id_resolver key type
  187. [ 0.272977] Key type id_resolver registered
  188. [ 0.272982] Key type id_legacy registered
  189. [ 0.272993] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  190. [ 0.273013] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  191. [ 0.273405] 9p: Installing v9fs 9p2000 file system support
  192. [ 0.289265] Key type asymmetric registered
  193. [ 0.289272] Asymmetric key parser 'x509' registered
  194. [ 0.289302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  195. [ 0.289308] io scheduler mq-deadline registered
  196. [ 0.289313] io scheduler kyber registered
  197. [ 0.295585] pwm-backlight lvds_backlight: lvds_backlight supply power not found, using dummy regulator
  198. [ 0.296187] EINJ: ACPI disabled.
  199. [ 0.301112] i.MX8MP clock driver probe done
  200. [ 0.305184] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
  201. [ 0.305197] imx-sdma 30bd0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
  202. [ 0.306902] mxs-dma 33000000.dma-apbh: initialized
  203. [ 0.308506] Bus freq driver module loaded
  204. [ 0.314582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  205. [ 0.316927] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 28, base_baud = 5000000) is a IMX
  206. [ 0.317435] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 29, base_baud = 5000000) is a IMX
  207. [ 0.317837] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 30, base_baud = 1500000) is a IMX
  208. [ 1.317856] printk: console [ttymxc1] enabled
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!