Advertisement
Guest User

dmesg

a guest
May 16th, 2017
656
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 71.21 KB | None
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.10.96-tegra (buildbrain@mobile-u64-1072) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Nov 9 19:42:57 PST 2016
  5. [ 0.000000] CPU: Cortex A57 Processor [411fd071] revision 1
  6. [ 0.000000] alternative: enabling workaround for ARM erratum 832075
  7. [ 0.000000] Machine: jetson_tx1
  8. [ 0.000000] bootconsole [earlycon0] enabled
  9. [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
  10. [ 0.000000] Tegra reserved memory:
  11. LP0: ff2bf000 - ff2bffff
  12. Bootloader framebuffer: 00000000 - 00000000
  13. Bootloader framebuffer2: 00000000 - 00000000
  14. Framebuffer: 00000000 - 00000000
  15. 2nd Framebuffer: 00000000 - 00000000
  16. Carveout: 00000000 - 00000000
  17. Vpr: 00000000 - 00000000
  18. Tsec: 00000000 - 00000000
  19. Bootloader Debug Data: 00000000 - 00000000
  20. [ 0.000000] Nvdumper: ff23f000 - ff23ffff
  21. [ 0.000000] cma: CMA: reserved 16 MiB at fdc00000
  22. [ 0.000000] On node 0 totalpages: 1043968
  23. [ 0.000000] DMA32 zone: 7168 pages used for memmap
  24. [ 0.000000] DMA32 zone: 0 pages reserved
  25. [ 0.000000] DMA32 zone: 519680 pages, LIFO batch:31
  26. [ 0.000000] Normal zone: 7168 pages used for memmap
  27. [ 0.000000] Normal zone: 524288 pages, LIFO batch:31
  28. [ 0.000000] psci: probing for conduit method from DT.
  29. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  30. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  31. [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm64/boot/dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
  32. [ 0.000000] DTB Build time: Nov 9 2016 19:40:03
  33. [ 0.000000] Tegra21: Speedo/IDDQ fuse revision 4
  34. [ 0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2
  35. [ 0.000000] Tegra21: CPU Process ID 0, Soc Process ID 1, Gpu Process ID 0
  36. [ 0.000000] Tegra21: CPU Speedo value 2051, Soc Speedo value 1952, Gpu Speedo value 2055
  37. [ 0.000000] Tegra21: CPU IDDQ 2000, Soc IDDQ 2240, Gpu IDDQ 2740
  38. [ 0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 1 Bootrom patch v0x3f
  39. [ 0.000000] tegra: PLLP fixed rate: 408000000
  40. [ 0.000000] pll_u: boot with h/w control already set
  41. [ 0.000000] pll_x boot misc1 0x0 : expected 0x20
  42. [ 0.000000] (comparison mask = 0xffffff)
  43. [ 0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000
  44. [ 0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000
  45. [ 0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000
  46. [ 0.000000] Lowering se maximum rate from 1000000000 to 627200000
  47. [ 0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000
  48. [ 0.000000] Lowering msenc maximum rate from 1000000000 to 716800000
  49. [ 0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000
  50. [ 0.000000] Lowering vi maximum rate from 1000000000 to 793600000
  51. [ 0.000000] Lowering isp maximum rate from 1000000000 to 793600000
  52. [ 0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000
  53. [ 0.000000] Lowering sbus maximum rate from 600000000 to 408000000
  54. [ 0.000000] Lowering host1x maximum rate from 600000000 to 408000000
  55. [ 0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000
  56. [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000
  57. [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000
  58. [ 0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000
  59. [ 0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000
  60. [ 0.000000] Lowering sor0 maximum rate from 600000000 to 540000000
  61. [ 0.000000] Lowering sor1 maximum rate from 600000000 to 594000000
  62. [ 0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000
  63. [ 0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000
  64. [ 0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000
  65. [ 0.000000] Lowering hda maximum rate from 102000000 to 51000000
  66. [ 0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000
  67. [ 0.000000] Lowering qspi maximum rate from 163200000 to 116600000
  68. [ 0.000000] Lowering gbus maximum rate from 1300000000 to 998400000
  69. [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000
  70. [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000
  71. [ 0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
  72. [ 0.000000] tegra dvfs: vdd_core: nominal 1075mV, offset 0uV, step 12500uV, scaling enabled
  73. [ 0.000000] tegra dvfs: vdd_gpu: nominal 1110mV, offset 710000uV, step 10000uV, scaling enabled
  74. [ 0.000000] Tegra reset control registration success
  75. [ 0.000000] tegra_powergate_init: DONE
  76. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fecf000 s20800 r8192 d24256 u53248
  77. [ 0.000000] pcpu-alloc: s20800 r8192 d24256 u53248 alloc=13*4096
  78. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  79. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029632
  80. [ 0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait
  81. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  82. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  83. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  84. [ 0.000000] Memory: 2030MB 2048MB = 4078MB total
  85. [ 0.000000] Memory: 4067000k/4067000k available, 108872k reserved
  86. [ 0.000000] Virtual kernel memory layout:
  87. vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
  88. vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000 ( 56 MB)
  89. modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  90. memory : 0xffffffc000000000 - 0xffffffc100000000 ( 4096 MB)
  91. .init : 0xffffffc00114f000 - 0xffffffc0011ba140 ( 429 kB)
  92. .text : 0xffffffc000080000 - 0xffffffc00114e3a4 ( 17209 kB)
  93. .data : 0xffffffc0011ce000 - 0xffffffc00139e7f0 ( 1858 kB)
  94. [ 0.000000] Preemptible hierarchical RCU implementation.
  95. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  96. [ 0.000000] NR_IRQS:704 nr_irqs:704 0
  97. [ 0.000000] the number of interrupt controllers found is 6
  98. [ 0.000000] Architected local timer running at 19.20MHz (phys).
  99. [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  100. [ 0.000000] Console: colour dummy device 80x25
  101. [ 0.000000] console [tty0] enabled
  102. [ 0.000000] allocated 16777216 bytes of page_cgroup
  103. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  104. [ 0.023533] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=192000
  105. [ 0.032340] pid_max: default: 32768 minimum: 301
  106. [ 0.037030] Security Framework initialized
  107. [ 0.041063] Mount-cache hash table entries: 256
  108. [ 0.099582] Initializing cgroup subsys debug
  109. [ 0.101886] Initializing cgroup subsys memory
  110. [ 0.106224] Initializing cgroup subsys devices
  111. [ 0.110626] Initializing cgroup subsys freezer
  112. [ 0.115034] Initializing cgroup subsys net_cls
  113. [ 0.119453] Initializing cgroup subsys blkio
  114. [ 0.123707] Initializing cgroup subsys perf_event
  115. [ 0.128571] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  116. [ 0.170271] ftrace: Allocated trace_printk buffers
  117. [ 0.230800] Brought up 4 CPUs
  118. [ 0.231777] SMP: Total of 4 processors activated.
  119. [ 0.236468] alternatives: patching kernel code
  120. [ 0.243438] devtmpfs: initialized
  121. [ 0.253691] pinctrl core: initialized pinctrl subsystem
  122. [ 0.257151] regulator-dummy: ; Rail ON
  123. [ 0.260996] Initializing plugin-manager
  124. [ 0.264831] node /plugin-manager/fragment-e3326@0 match with board 3326-*
  125. [ 0.272442] NET: Registered protocol family 16
  126. [ 0.277585] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  127. [ 0.283378] console [pstore-1] enabled
  128. [ 0.286307] ramoops: attached 0x200000@0xff03f000, ecc: 0/0
  129. [ 0.292133] I2C first dynamic bus number based on alias = 7
  130. [ 0.297431] cpuidle: using governor ladder
  131. [ 0.301479] cpuidle: using governor menu
  132. [ 0.306094] PMC: Setting PMIC interrupt active-low
  133. [ 0.310822] tegra-pmc device create success
  134. [ 0.314347] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
  135. [ 0.321501] Clear bootloader IO dpd settings
  136. [ 0.325736] PMC: configuring io pad defaults
  137. [ 0.330162] PMC: IO pad audio voltage is 1800000
  138. [ 0.334675] PMC: IO pad cam voltage is 1800000
  139. [ 0.339094] PMC: IO pad dbg voltage is 1800000
  140. [ 0.343523] PMC: IO pad dmic voltage is 1800000
  141. [ 0.348022] PMC: IO pad pex-ctrl voltage is 1800000
  142. [ 0.352883] PMC: IO pad spi voltage is 1800000
  143. [ 0.357295] PMC: IO pad uart voltage is 1800000
  144. [ 0.361809] PMC: IO pad bb voltage is 1800000
  145. [ 0.366134] PMC: IO pad audio-hv voltage is 1800000
  146. [ 0.370996] PMC: IO pad spi-hv voltage is 1800000
  147. [ 0.375668] PMC: IO pad gpio voltage is 1800000
  148. [ 0.380174] PMC: IO pad sdmmc3 voltage is 1800000
  149. [ 0.384762] PMC: IO pad pex-bias power is disable
  150. [ 0.389441] PMC: IO pad pex-clk1 power is disable
  151. [ 0.394129] PMC: IO pad pex-clk2 power is disable
  152. [ 0.398792] T210 pmc padctrl driver initialized
  153. [ 0.403340] T210 pmc config for bootrom command passed
  154. [ 0.409314] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled
  155. [ 0.415975] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0
  156. [ 0.424090] platform tegra-carveouts.23: SMMU isn't ready yet
  157. [ 0.428337] platform tegra-carveouts.23: domain=ffffffc0fe239e58 allocates as[0]=ffffffc0fe1e80a8
  158. [ 0.436729] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
  159. [ 0.443287] bpmp: connect returned 0
  160. [ 0.446662] mapped MMIO address: 0xffffff8000038000 -> 0x70019000
  161. [ 0.452352] mapped MMIO address: 0xffffff800005e000 -> 0x7001c000
  162. [ 0.458403] mapped MMIO address: 0xffffff8000096000 -> 0x7001d000
  163. [ 0.465313] Wake16 for irq=34
  164. [ 0.472738] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found
  165. [ 0.478400] tegra210-pinctrl 700008d4.pinmux: lookup the user state unused not found
  166. [ 0.486123] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver
  167. [ 0.493234] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245
  168. [ 0.501157] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name wlan-default
  169. [ 0.508659] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control
  170. [ 0.516392] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control
  171. [ 0.524133] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
  172. [ 0.533603] Wake44 for irq=81
  173. [ 0.534598] Wake40 for irq=53
  174. [ 0.537522] Wake41 for irq=53
  175. [ 0.540467] Wake42 for irq=53
  176. [ 0.543414] Wake43 for irq=53
  177. [ 0.546727] platform 70006000.serial: domain=ffffffc0fe20b158 allocates as[0]=ffffffc0fe1e8110
  178. [ 0.555630] platform sound.27: domain=ffffffc0fe27ddd8 allocates as[0]=ffffffc0fe1e8178
  179. [ 0.564396] platform tegradc.1: domain=ffffffc0fe27d9d8 allocates as[0]=ffffffc0fe1e81e0
  180. [ 0.572480] platform gpu.0: domain=ffffffc0fe27d758 allocates as[0]=ffffffc0fe1e8248
  181. [ 0.578734] platform gpu.0: domain=ffffffc0fe27d758 allocates as[1]=ffffffc0fe1e82b0
  182. [ 0.586459] platform gpu.0: domain=ffffffc0fe27d758 allocates as[2]=ffffffc0fe1e8318
  183. [ 0.594161] platform gpu.0: domain=ffffffc0fe27d758 allocates as[3]=ffffffc0fe1e8380
  184. [ 0.603264] platform 1003000.pcie-controller: domain=ffffffc0fe27d558 allocates as[0]=ffffffc0fe1e83e8
  185. [ 0.612449] platform sdhci-tegra.3: domain=ffffffc0fe27d0d8 allocates as[0]=ffffffc0fe1e8450
  186. [ 0.619835] platform sdhci-tegra.0: domain=ffffffc0fe389dd8 allocates as[0]=ffffffc0fe1e84b8
  187. [ 0.628128] Wake39 for irq=52
  188. [ 0.636708] gpio wake52 for gpio=61
  189. [ 0.638409] gpio wake8 for gpio=58
  190. [ 0.641632] gpio wake8 for gpio=58
  191. [ 0.645812] irq: no irq domain found for /soctherm@0x700E2000 !
  192. [ 0.650998] irq: no irq domain found for /soctherm@0x700E2000 !
  193. [ 0.656897] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00
  194. [ 0.663884] PMC dt information non-NULL tegra_init_suspend
  195. [ 0.674306] Loading EMC tables...
  196. [ 0.675710] tegra: Using EMC sequence '21021' for Rev. 7 tables
  197. [ 0.681549] tegra: emc: Derated table is valid.
  198. [ 0.686039] Lowering emc maximum rate from 1800000000 to 1600000000
  199. [ 0.692286] tegra: validated EMC DFS table
  200. [ 0.702100] swapper/0 isomgr_init(): iso emc max clk=1600000KHz
  201. [ 0.706029] swapper/0 isomgr_init(): max_iso_bw=11520000KB
  202. [ 0.711687] vdso: 2 pages (1 code, 1 data) at base ffffffc0011d6000
  203. [ 0.717743] vdso32: 2 pages (1 code, 1 data) at base ffffffc0011d5000
  204. [ 0.724176] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  205. [ 0.731074] nvdumper: last reboot was unknown
  206. [ 0.735237] nvdumper: set_dirty_state 0x2badface
  207. [ 0.740196] Tegra restart notifier registered.
  208. [ 0.751400] bio: create slab <bio-0> at 0
  209. [ 0.754689] vdd-ac-bat: 5000 mV ; Rail ON
  210. [ 0.757552] vdd-cpu-fixed: 1000 mV ; Rail ON
  211. [ 0.762123] vgaarb: loaded
  212. [ 0.764615] SCSI subsystem initialized
  213. [ 0.768093] libata version 3.00 loaded.
  214. [ 0.768218] usbcore: registered new interface driver usbfs
  215. [ 0.773565] usbcore: registered new interface driver hub
  216. [ 0.778883] usbcore: registered new device driver usb
  217. [ 0.784444] gpio wake33 for gpio=188
  218. [ 0.788689] regulator_get() failed for (1-0074,vcc), -19
  219. [ 0.792699] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered
  220. [ 0.801265] gpio wake21 for gpio=89
  221. [ 0.804137] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539
  222. [ 0.811132] regulator_get() failed for (1-0077,vcc), -19
  223. [ 0.816166] pca953x 1-0077: no regulator found for vcc. Assuming vcc is always powered
  224. [ 0.824735] gpio wake36 for gpio=202
  225. [ 0.827695] gpiochip_add: registered GPIOs 992 to 1007 on device: tca9539
  226. [ 0.834781] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings
  227. [ 0.842374] max77620 4-003c: CID0: 0xf6
  228. [ 0.845454] max77620 4-003c: CID1: 0x06
  229. [ 0.849263] max77620 4-003c: CID2: 0x20
  230. [ 0.853092] max77620 4-003c: CID3: 0x59
  231. [ 0.856891] max77620 4-003c: CID4: 0x35
  232. [ 0.860717] max77620 4-003c: CID5: 0x80
  233. [ 0.864518] max77620 4-003c: MAX77620 PMIC OTP Version is 0x35
  234. [ 0.871656] max77620-pmic max77620-pmic: Consumer c2 does not have device name
  235. [ 0.878344] vdd_core: 600 <--> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON
  236. [ 0.886127] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON
  237. [ 0.892450] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON
  238. [ 0.899417] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON
  239. [ 0.905272] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON
  240. [ 0.911049] avdd-sys: supplied by vdd-pre-reg
  241. [ 0.915746] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON
  242. [ 0.921604] vdd-pex: supplied by vdd-pre-reg
  243. [ 0.926160] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON
  244. [ 0.934656] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF
  245. [ 0.941284] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON
  246. [ 0.947382] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF
  247. [ 0.954655] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF
  248. [ 0.960454] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
  249. [ 0.966835] vdd-gen-pll-edp: supplied by vdd-pre-reg
  250. [ 0.972297] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
  251. [ 0.978354] vdd-hdmi-dp: supplied by vdd-pre-reg
  252. [ 0.983248] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default
  253. [ 0.990959] gpiochip_add: registered GPIOs 984 to 991 on device: max77620-gpio
  254. [ 0.999164] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized
  255. [ 1.008324] max77620 4-003c: max77620 probe successfully
  256. [ 1.012167] media: Linux media interface: v0.10
  257. [ 1.016172] Linux video capture interface: v2.00
  258. [ 1.021154] pps_core: LinuxPPS API ver. 1 registered
  259. [ 1.025679] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  260. [ 1.034805] PTP clock support registered
  261. [ 1.038983] Tegra WDT enabled on probe. Timeout = 120 seconds.
  262. [ 1.044687] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
  263. [ 1.051436] Advanced Linux Sound Architecture Driver Initialized.
  264. [ 1.056589] Bluetooth: Core ver 2.16
  265. [ 1.059844] NET: Registered protocol family 31
  266. [ 1.064261] Bluetooth: HCI device and connection manager initialized
  267. [ 1.070586] Bluetooth: HCI socket layer initialized
  268. [ 1.075428] Bluetooth: L2CAP socket layer initialized
  269. [ 1.080472] Bluetooth: SCO socket layer initialized
  270. [ 1.086346] vdd-3v3: 3300 mV ; Rail ON
  271. [ 1.090091] max77620-gpio7: 1050 mV ; Rail ON
  272. [ 1.093415] max77620-gpio7: supplied by vdd-gen-pll-edp
  273. [ 1.098776] lcd-bl-en: 1800 mV ; Rail ON
  274. [ 1.102653] en-vdd-sd: 3300 mV ; Rail OFF
  275. [ 1.106495] en-vdd-sd: supplied by vdd-3v3
  276. [ 1.110640] reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
  277. [ 1.118677] en-vdd-cam: 1800 mV ; Rail OFF
  278. [ 1.129058] vdd-sys-boost: 5000 mV ; Rail ON
  279. [ 1.131788] vdd-hdmi: 5000 mV ; Rail OFF
  280. [ 1.135269] vdd-hdmi: supplied by vdd-3v3
  281. [ 1.139378] aux-3v3: 3300 mV ; Rail ON
  282. [ 1.143085] snsr_pm: 3300 mV ; Rail ON
  283. [ 1.147300] vdd-disp-3v0: 3000 mV ; Rail ON
  284. [ 1.151270] vdd-fan: 5000 mV ; Rail OFF
  285. [ 1.154805] usb-vbus1: 5000 mV ; Rail OFF
  286. [ 1.158665] usb-vbus1: supplied by vdd-3v3
  287. [ 1.162901] usb-vbus3: 5000 mV ; Rail OFF
  288. [ 1.166725] usb-vbus3: supplied by vdd-3v3
  289. [ 1.171217] en-vdd-ts-1v8: 1800 mV ; Rail OFF
  290. [ 1.175524] en-vdd-ts-hv-3v3: 3300 mV ; Rail OFF
  291. [ 1.180252] en-vdd-disp-3v3: 3300 mV ; Rail ON
  292. [ 1.184533] en-mdm-pwr-3v7: ; Rail OFF
  293. [ 1.188384] en-vdd-disp-1v8: 1800 mV ; Rail ON
  294. [ 1.192359] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
  295. [ 1.200501] en-vdd-cam-hv-2v8: ; Rail OFF
  296. [ 1.204306] rtl-5v0: ; Rail OFF
  297. [ 1.207403] en-usb-vbus2: ; Rail OFF
  298. [ 1.211244] en-vdd-cam-1v2: ; Rail OFF
  299. [ 1.214568] en-vdd-cam-1v2: supplied by vdd-3v3
  300. [ 1.219199] en-vdd-vcm-2v8: ; Rail ON
  301. [ 1.222725] en-vdd-vcm-2v8: supplied by vdd-3v3
  302. [ 1.227622] en-vdd-cam-1v2-alt: ; Rail OFF
  303. [ 1.231775] regulator-pwm 0.pwm-regulator: PWM request deferred
  304. [ 1.237161] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral
  305. [ 1.245078] vdd_gpu: applied init 1000000uV constraint
  306. [ 1.249810] vdd_gpu: 710 <--> 1320 mV at 1000 mV ; Rail OFF
  307. [ 1.255802] vdd_cpu: applied init 1000000uV constraint
  308. [ 1.260481] vdd_cpu: 708 <--> 1322 mV at 1000 mV normal ; Rail ON
  309. [ 1.267089] gpio wake34 for gpio=200
  310. [ 1.271292] extcon-gpio-states 1.extcon: Cable state 0
  311. [ 1.276505] Switching to clocksource arch_sys_counter
  312. [ 1.294455] nvmap_heap_init: nvmap_heap_init: created heap block cache
  313. [ 1.299169] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048
  314. [ 1.308471] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout
  315. [ 1.316768] nvmap_page_pool_init: Total RAM pages: 1020846
  316. [ 1.322224] nvmap_page_pool_init: nvmap page pool size: 127605 pages (498 MB)
  317. [ 1.329418] nvmap_background_zero_thread: PP zeroing thread starting.
  318. [ 1.336312] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
  319. [ 1.343166] nvmap:inner cache maint threshold=2097152
  320. [ 1.354572] Wake39 for irq=52
  321. [ 1.355734] Could not add tegra-otg to power domain using device tree
  322. [ 1.362194] tegra-otg tegra-otg: otg transceiver registered
  323. [ 1.367974] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
  324. [ 1.376796] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
  325. [ 1.384640] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
  326. [ 1.392931] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
  327. [ 1.401323] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
  328. [ 1.410325] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
  329. [ 1.418329] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
  330. [ 1.427482] tegra21_plle_clk_enable: pll_e is already enabled
  331. [ 1.432621] t210_sata_uphy_pll_init: init sata uphy pll
  332. [ 1.437797] t210_sata_uphy_pll_init SATA uses SATA Lane
  333. [ 1.443312] tegra_xusb_padctl_phy_enable: init pex uphy pll
  334. [ 1.449771] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sys is having fixed voltage 1800000
  335. [ 1.457456] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-uart is having fixed voltage 1800000
  336. [ 1.466371] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio is having fixed voltage 1800000
  337. [ 1.475389] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-cam is having fixed voltage 1800000
  338. [ 1.484232] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-pex-ctrl is having fixed voltage 1800000
  339. [ 1.493501] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc1 is having voltages: 1800000:3300000
  340. [ 1.502955] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc3 is having fixed voltage 1800000
  341. [ 1.512049] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc4 is having fixed voltage 1800000
  342. [ 1.521150] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio-hv is having fixed voltage 1800000
  343. [ 1.530422] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-debug is having fixed voltage 1800000
  344. [ 1.539424] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dmic is having fixed voltage 1800000
  345. [ 1.548366] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-gpio is having fixed voltage 1800000
  346. [ 1.557289] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi is having fixed voltage 1800000
  347. [ 1.566130] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi-hv is having fixed voltage 1800000
  348. [ 1.575233] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc2 is having fixed voltage 1800000
  349. [ 1.584329] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dp is having fixed voltage 1800000
  350. [ 1.593032] tegra210-pmc-iopower pmc-iopower.29: NO_IO_POWER setting 0x0
  351. [ 1.599883] NET: Registered protocol family 2
  352. [ 1.604634] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
  353. [ 1.611399] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  354. [ 1.617984] TCP: Hash tables configured (established 32768 bind 32768)
  355. [ 1.624374] TCP: reno registered
  356. [ 1.627508] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  357. [ 1.633522] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  358. [ 1.640156] NET: Registered protocol family 1
  359. [ 1.644512] RPC: Registered named UNIX socket transport module.
  360. [ 1.650125] RPC: Registered udp transport module.
  361. [ 1.654817] RPC: Registered tcp transport module.
  362. [ 1.659481] RPC: Registered tcp NFSv4.1 backchannel transport module.
  363. [ 1.665910] PCI: CLS 0 bytes, default 64
  364. [ 1.666224] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
  365. [ 1.672755] Trying to unpack rootfs image as initramfs...
  366. [ 1.910155] Freeing initrd memory: 6740K (ffffffc003100000 - ffffffc003795000)
  367. [ 1.919096] host1x host1x: initialized
  368. [ 1.924486] NTFS driver 2.1.30 [Flags: R/O].
  369. [ 1.926925] fuse init (API version 7.22)
  370. [ 1.930807] msgmni has been set to 7988
  371. [ 1.935541] io scheduler noop registered (default)
  372. [ 1.939376] Tegra cpuquiet initialized: disabled
  373. [ 1.945501] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
  374. [ 1.951399] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
  375. [ 1.961490] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
  376. [ 1.991611] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
  377. [ 1.996057] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
  378. [ 2.002496] tegra-pcie 1003000.pcie-controller: PCIE: no ports detected
  379. [ 2.009240] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails
  380. [ 2.017647] tsec tsec: initialized
  381. [ 2.020298] tsec tsecb: initialized
  382. [ 2.024462] nvdec nvdec: initialized
  383. [ 2.028908] falcon vic03: initialized
  384. [ 2.031975] falcon msenc: initialized
  385. [ 2.035332] falcon nvjpg: initialized
  386. [ 2.038709] tegradc tegradc.1: Display dc.54240000 registered with id=0
  387. [ 2.044482] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1
  388. [ 2.051804] display board info: id 0x0, fab 0x0
  389. [ 2.056828] display board info: id 0x0, fab 0x0
  390. [ 2.061049] invalid panel compatible
  391. [ 2.064207] parse_tmds_config: No tmds-config node
  392. [ 2.069069] of_dc_parse_platform_data: could not find vrr-settings node
  393. [ 2.075572] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
  394. [ 2.082239] of_dc_parse_platform_data: could not find SD settings node
  395. [ 2.088643] of_dc_parse_platform_data: could not find cmu node
  396. [ 2.094461] of_dc_parse_platform_data: could not find cmu node for adobeRGB
  397. [ 2.101416] tegradc tegradc.1: DT parsed successfully
  398. [ 2.107443] display board info: id 0x0, fab 0x0
  399. [ 2.111545] gpio wake53 for gpio=225
  400. [ 2.115445] tegradc tegradc.1: probed
  401. [ 2.200192] Console: switching to colour frame buffer device 80x30
  402. [ 2.207743] tegradc tegradc.1: fb registered
  403. [ 2.212665] tegra_camera_platform tegra-camera-platform.45: tegra_camera_probe:camera_platform_driver probe
  404. [ 2.223020] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 3600000
  405. [ 2.234228] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
  406. [ 2.243656] tegra-adma tegra210-adma: Tegra210 ADMA driver register 10 channels
  407. [ 2.251959] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  408. [ 2.258704] of_serial 70006000.serial: RX periodic polling enabled
  409. [ 2.264486] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
  410. [ 2.271324] console [ttyS0] enabled, bootconsole disabled
  411. [ 2.282166] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
  412. [ 2.293479] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
  413. [ 2.304514] serial-tegra 70006300.serial: RX in PIO mode
  414. [ 2.311506] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
  415. [ 2.324593] (null): coherent DMA mask is unset
  416. [ 2.330840] gk20a gpu.0: failed to allocate secure buffer -12
  417. [ 2.343312] brd: module loaded
  418. [ 2.350575] loop: module loaded
  419. [ 2.355747] zram: Created 1 device(s) ...
  420. [ 2.361480] nct1008_nct72 0-004c: find device tree node, parsing dt
  421. [ 2.369415] nct1008_nct72 0-004c: starting parse dt
  422. [ 2.376003] nct1008_nct72 0-004c: success parsing dt
  423. [ 2.382649] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
  424. [ 2.461730] NCT72: Enabled overheat logging at 104.00C
  425. [ 2.468469] gpio wake33 for gpio=188
  426. [ 2.473571] nct1008_nct72 0-004c: nct1008_probe: initialized
  427. [ 2.483155] THERMAL EST start of therm_fan_est_probe.
  428. [ 2.489683] THERMAL EST: found 2 subdevs
  429. [ 2.494999] THERMAL EST name: thermal-fan-est.
  430. [ 2.500805] THERMAL EST num_resources: 0
  431. [ 2.506039] [THERMAL EST subdev 0]
  432. [ 2.510718] THERMAL EST subdev name: CPU-therm
  433. [ 2.516412] THERMAL EST index 0 coeffs 50
  434. [ 2.521623] THERMAL EST index 1 coeffs 0
  435. [ 2.526671] THERMAL EST index 2 coeffs 0
  436. [ 2.531658] THERMAL EST index 3 coeffs 0
  437. [ 2.536586] THERMAL EST index 4 coeffs 0
  438. [ 2.541462] THERMAL EST index 5 coeffs 0
  439. [ 2.546261] THERMAL EST index 6 coeffs 0
  440. [ 2.551028] THERMAL EST index 7 coeffs 0
  441. [ 2.555741] THERMAL EST index 8 coeffs 0
  442. [ 2.560414] THERMAL EST index 9 coeffs 0
  443. [ 2.565063] [THERMAL EST subdev 1]
  444. [ 2.569187] THERMAL EST subdev name: GPU-therm
  445. [ 2.574354] THERMAL EST index 0 coeffs 50
  446. [ 2.579063] THERMAL EST index 1 coeffs 0
  447. [ 2.583678] THERMAL EST index 2 coeffs 0
  448. [ 2.588262] THERMAL EST index 3 coeffs 0
  449. [ 2.592819] THERMAL EST index 4 coeffs 0
  450. [ 2.597309] THERMAL EST index 5 coeffs 0
  451. [ 2.601759] THERMAL EST index 6 coeffs 0
  452. [ 2.606152] THERMAL EST index 7 coeffs 0
  453. [ 2.610526] THERMAL EST index 8 coeffs 0
  454. [ 2.614869] THERMAL EST index 9 coeffs 0
  455. [ 2.619193] THERMAL EST index 0: trip_temp 0, hyst 0
  456. [ 2.624569] THERMAL EST index 1: trip_temp 51000, hyst 15000
  457. [ 2.630641] THERMAL EST index 2: trip_temp 61000, hyst 9000
  458. [ 2.636595] THERMAL EST index 3: trip_temp 71000, hyst 9000
  459. [ 2.642554] THERMAL EST index 4: trip_temp 82000, hyst 10000
  460. [ 2.648600] THERMAL EST index 5: trip_temp 140000, hyst 0
  461. [ 2.654406] THERMAL EST index 6: trip_temp 150000, hyst 0
  462. [ 2.660205] THERMAL EST index 7: trip_temp 160000, hyst 0
  463. [ 2.666012] THERMAL EST index 8: trip_temp 170000, hyst 0
  464. [ 2.671824] THERMAL EST index 9: trip_temp 180000, hyst 0
  465. [ 2.677628] THERMAL EST index 0: trip_temps_hyst 0
  466. [ 2.682839] THERMAL EST index 1: trip_temps_hyst 36000
  467. [ 2.688399] THERMAL EST index 2: trip_temps_hyst 51000
  468. [ 2.693943] THERMAL EST index 3: trip_temps_hyst 52000
  469. [ 2.699450] THERMAL EST index 4: trip_temps_hyst 61000
  470. [ 2.704945] THERMAL EST index 5: trip_temps_hyst 62000
  471. [ 2.710443] THERMAL EST index 6: trip_temps_hyst 71000
  472. [ 2.715934] THERMAL EST index 7: trip_temps_hyst 72000
  473. [ 2.721434] THERMAL EST index 8: trip_temps_hyst 82000
  474. [ 2.726926] THERMAL EST index 9: trip_temps_hyst 140000
  475. [ 2.732519] THERMAL EST index 10: trip_temps_hyst 140000
  476. [ 2.738215] THERMAL EST index 11: trip_temps_hyst 150000
  477. [ 2.743920] THERMAL EST index 12: trip_temps_hyst 150000
  478. [ 2.749617] THERMAL EST index 13: trip_temps_hyst 160000
  479. [ 2.755323] THERMAL EST index 14: trip_temps_hyst 160000
  480. [ 2.761011] THERMAL EST index 15: trip_temps_hyst 170000
  481. [ 2.766675] THERMAL EST index 16: trip_temps_hyst 170000
  482. [ 2.772340] THERMAL EST index 17: trip_temps_hyst 180000
  483. [ 2.777998] THERMAL EST index 18: trip_temps_hyst 180000
  484. [ 2.783656] THERMAL EST index 19: trip_temps_hyst 0
  485. [ 2.788862] THERMAL EST index 20: trip_temps_hyst 0
  486. [ 2.794095] THERMAL EST init dev[0] temp hist to 25000
  487. [ 2.799591] THERMAL EST init dev[1] temp hist to 25000
  488. [ 2.805092] THERMAL EST cdev_type: pwm-fan.
  489. [ 2.809648] THERMAL EST governor name: pid_thermal_gov
  490. [ 2.815378] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est.46
  491. [ 2.825570] THERMAL EST: thz register success.
  492. [ 2.830667] THERMAL EST: end of probe, return err: 0
  493. [ 2.836289] tegra_profiler: Branch: Dev
  494. [ 2.840743] tegra_profiler: Version: 1.107
  495. [ 2.845459] tegra_profiler: Samples version: 36
  496. [ 2.850637] tegra_profiler: IO version: 20
  497. [ 2.855388] armv8_pmu: imp: 0x41, idcode: 0x1
  498. [ 2.860435] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
  499. [ 2.867776] armv8_pmu: imp: 0x41, idcode: 0x1
  500. [ 2.872887] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
  501. [ 2.880325] armv8_pmu: imp: 0x41, idcode: 0x1
  502. [ 2.885515] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
  503. [ 2.893044] armv8_pmu: imp: 0x41, idcode: 0x1
  504. [ 2.898320] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
  505. [ 2.906051] tegra_profiler: auth: init
  506. [ 2.911134] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
  507. [ 2.919102] tegra-sata tegra-sata.0: version 1.0
  508. [ 2.919504] t210_sata_uphy_pll_init: sata uphy already enabled
  509. [ 2.927139] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
  510. [ 2.938714] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
  511. [ 2.950764] Rounding down aligned max_sectors from 4294967295 to 4294967288
  512. [ 2.959400] spi-tegra114 7000d400.spi: /spi@7000d400/prod-settings has no reg property
  513. [ 2.970244] spi-tegra114 7000d400.spi: Static pin configuration used
  514. [ 2.978340] spi_master spi0: cannot find modalias for /spi@7000d400/prod-settings
  515. [ 2.988854] spi-tegra114 7000da00.spi: /spi@7000da00/prod-settings has no reg property
  516. [ 2.999984] spi-tegra114 7000da00.spi: Static pin configuration used
  517. [ 3.008097] tegradc tegradc.1: vrr_setup failed
  518. [ 3.008237] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings
  519. [ 3.008817] tun: Universal TUN/TAP device driver, 1.6
  520. [ 3.008820] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  521. [ 3.039918] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  522. [ 3.039920] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  523. [ 3.040444] PPP generic driver version 2.4.2
  524. [ 3.040549] PPP BSD Compression module registered
  525. [ 3.040551] PPP Deflate Compression module registered
  526. [ 3.040563] PPP MPPE Compression module registered
  527. [ 3.040566] NET: Registered protocol family 24
  528. [ 3.040618] usbcore: registered new interface driver r8152
  529. [ 3.040647] usbcore: registered new interface driver asix
  530. [ 3.040670] usbcore: registered new interface driver ax88179_178a
  531. [ 3.040695] usbcore: registered new interface driver cdc_ether
  532. [ 3.040726] usbcore: registered new interface driver smsc95xx
  533. [ 3.040747] usbcore: registered new interface driver net1080
  534. [ 3.040770] usbcore: registered new interface driver cdc_subset
  535. [ 3.040790] usbcore: registered new interface driver zaurus
  536. [ 3.040839] usbcore: registered new interface driver cdc_ncm
  537. [ 3.040855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  538. [ 3.041125] ehci-pci: EHCI PCI platform driver
  539. [ 3.041309] tegra_xusb_read_usb_calib: usb_calib0 = 0x081e8410
  540. [ 3.042700] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210)
  541. [ 3.043292] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (124416 Bytes)
  542. [ 3.043504] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080040000 mapped 0xffffff8000339000 (124416 Bytes)
  543. [ 3.043509] tegra-xhci tegra-xhci: num_hsic_port 0
  544. [ 3.043989] usbcore: registered new interface driver cdc_acm
  545. [ 3.043991] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  546. [ 3.044014] usbcore: registered new interface driver cdc_wdm
  547. [ 3.044049] usbcore: registered new interface driver usb-storage
  548. [ 3.044130] usbcore: registered new interface driver usbserial
  549. [ 3.044151] usbcore: registered new interface driver ftdi_sio
  550. [ 3.044172] usbserial: USB Serial support registered for FTDI USB Serial Device
  551. [ 3.044192] usbcore: registered new interface driver option
  552. [ 3.044210] usbserial: USB Serial support registered for GSM modem (1-port)
  553. [ 3.044230] usbcore: registered new interface driver pl2303
  554. [ 3.044247] usbserial: USB Serial support registered for pl2303
  555. [ 3.044270] usbcore: registered new interface driver nvshieldled
  556. [ 3.044273] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
  557. [ 3.044533] tegra USB phy - inst[0] platform info:
  558. [ 3.044535] port_otg: yes
  559. [ 3.044537] has_hostpc: yes
  560. [ 3.044538] phy_interface: USB_PHY_INTF_UTMI
  561. [ 3.044540] op_mode: TEGRA_USB_OPMODE_DEVICE
  562. [ 3.044541] qc2_voltage: 0
  563. [ 3.044543] vbus_pmu_irq: 0
  564. [ 3.044544] charging: enabled
  565. [ 3.044546] remote_wakeup: disabled
  566. [ 3.045655] tegra-xhci tegra-xhci: Firmware timestamp: 2016-06-16 13:21:43 UTC, Version: 50.16 release, Falcon state 0x20
  567. [ 3.045701] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
  568. [ 3.045716] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1
  569. [ 3.046461] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
  570. [ 3.046541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  571. [ 3.046547] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  572. [ 3.046552] usb usb1: Product: Nvidia xHCI Host Controller
  573. [ 3.046556] usb usb1: Manufacturer: Linux 3.10.96-tegra tegra-xhci
  574. [ 3.046559] usb usb1: SerialNumber: tegra-xhci
  575. [ 3.046798] xHCI xhci_add_endpoint called for root hub
  576. [ 3.046801] xHCI xhci_check_bandwidth called for root hub
  577. [ 3.046882] hub 1-0:1.0: USB hub found
  578. [ 3.046900] hub 1-0:1.0: 5 ports detected
  579. [ 3.049337] regulator_get() failed for (tegra-udc.0,usb_bat_chg), -19
  580. [ 3.049343] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  581. [ 3.049719] usbcore: registered new interface driver xpad
  582. [ 3.049772] usbcore: registered new interface driver usb_acecad
  583. [ 3.049801] usbcore: registered new interface driver aiptek
  584. [ 3.049825] usbcore: registered new interface driver gtco
  585. [ 3.049848] usbcore: registered new interface driver hanwang
  586. [ 3.049874] usbcore: registered new interface driver kbtab
  587. [ 3.049899] usbcore: registered new interface driver wacom
  588. [ 3.088470] tegradc tegradc.1: blank - normal
  589. [ 3.088486] tegradc tegradc.1: unblank
  590. [ 3.110836] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
  591. [ 3.131839] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1
  592. [ 3.140322] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
  593. [ 3.140336] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
  594. [ 3.140499] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  595. [ 3.140504] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  596. [ 3.140509] usb usb2: Product: Nvidia xHCI Host Controller
  597. [ 3.140513] usb usb2: Manufacturer: Linux 3.10.96-tegra tegra-xhci
  598. [ 3.140516] usb usb2: SerialNumber: tegra-xhci
  599. [ 3.140748] xHCI xhci_add_endpoint called for root hub
  600. [ 3.140751] xHCI xhci_check_bandwidth called for root hub
  601. [ 3.140828] hub 2-0:1.0: USB hub found
  602. [ 3.140843] hub 2-0:1.0: 4 ports detected
  603. [ 3.180468] Wake51 for irq=118
  604. [ 3.180470] Enabling wake51
  605. [ 3.180762] Wake16 for irq=34
  606. [ 3.180764] Enabling wake16
  607. [ 3.181464] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0
  608. [ 3.181684] i2c /dev entries driver
  609. [ 3.183211] [OV5693]: probing v4l2 sensor.
  610. [ 3.183477] ov5693 6-0036: Failed to allocate eeprom reg map: -22
  611. [ 3.210352] Wake44 for irq=81
  612. [ 3.210368] Wake40 for irq=53
  613. [ 3.210370] Wake41 for irq=53
  614. [ 3.210372] Wake42 for irq=53
  615. [ 3.210374] Wake43 for irq=53
  616. [ 3.360301] usb 1-3: new high-speed USB device number 2 using tegra-xhci
  617. [ 3.394262] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
  618. [ 3.394268] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  619. [ 3.394273] usb 1-3: Product: USB2.0 Hub
  620. [ 3.394277] usb 1-3: Manufacturer: GenesysLogic
  621. [ 3.395861] hub 1-3:1.0: USB hub found
  622. [ 3.397404] hub 1-3:1.0: 4 ports detected
  623. [ 3.520650] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci
  624. [ 3.620763] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff
  625. [ 3.620769] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
  626. [ 3.620773] usb 2-1: Product: USB 10/100/1000 LAN
  627. [ 3.620776] usb 2-1: Manufacturer: Nvidia
  628. [ 3.620780] usb 2-1: SerialNumber: 000001000000
  629. [ 3.740749] usb 2-2: new SuperSpeed USB device number 3 using tegra-xhci
  630. [ 3.763378] usb 2-2: New USB device found, idVendor=05e3, idProduct=0612
  631. [ 3.763383] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  632. [ 3.763387] usb 2-2: Product: USB3.0 Hub
  633. [ 3.763391] usb 2-2: Manufacturer: GenesysLogic
  634. [ 3.770646] hub 2-2:1.0: USB hub found
  635. [ 3.770976] hub 2-2:1.0: 4 ports detected
  636. [ 3.881045] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci
  637. [ 3.948170] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29)
  638. [ 3.948175] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
  639. US6,570,884, US6,115,776, and US6,327,625.
  640.  
  641. [ 3.962974] virtual_init
  642. [ 3.963506] [IMX135] sensor driver loading
  643. [ 3.963533] [imx132] sensor driver loading
  644. [ 3.963565] [ar0261] sensor driver loading
  645. [ 3.963625] ov7695 sensor driver loading
  646. [ 3.963651] mt9m114 sensor driver loading
  647. [ 3.963677] [ov10823] sensor driver loading
  648. [ 3.963844] usbcore: registered new interface driver uvcvideo
  649. [ 3.963846] USB Video Class driver (1.1.1)
  650. [ 3.994902] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0
  651. [ 3.995327] FAN dev name: pwm-fan
  652. [ 3.995338] FAN:gpio request success.
  653. [ 3.995367] pwm_fan_driver pwm-fan.43: cap state:7, cap pwm:255
  654. [ 3.995494] pwm_fan_driver pwm-fan.43: got pwm for fan
  655. [ 3.995574] pwm_fan_driver pwm-fan.43: fan tach request irq: 360. success
  656. [ 3.995581] pwm_fan_driver pwm-fan.43: tach period: 1000
  657. [ 3.995654] pwm_fan_driver pwm-fan.43: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
  658. [ 3.995660] pwm_fan_driver pwm-fan.43: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
  659. [ 3.995665] pwm_fan_driver pwm-fan.43: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
  660. [ 3.995669] pwm_fan_driver pwm-fan.43: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
  661. [ 3.995674] pwm_fan_driver pwm-fan.43: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
  662. [ 3.995678] pwm_fan_driver pwm-fan.43: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
  663. [ 3.995683] pwm_fan_driver pwm-fan.43: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
  664. [ 3.995687] pwm_fan_driver pwm-fan.43: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
  665. [ 3.995692] pwm_fan_driver pwm-fan.43: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
  666. [ 3.995696] pwm_fan_driver pwm-fan.43: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
  667. [ 3.997050] tegra_aotag tegra-aotag.30: AOTAG probe started
  668. [ 3.997107] tegra_aotag tegra-aotag.30: nominal ft -- 105
  669. [ 3.997111] tegra_aotag tegra-aotag.30: tall -- 76
  670. [ 3.997114] tegra_aotag tegra-aotag.30: tiddq -- 1
  671. [ 3.997118] tegra_aotag tegra-aotag.30: ten-count -- 16
  672. [ 3.997121] tegra_aotag tegra-aotag.30: tsample -- 9
  673. [ 3.997125] tegra_aotag tegra-aotag.30: pdiv -- 8
  674. [ 3.997129] tegra_aotag tegra-aotag.30: nominal cp -- 25
  675. [ 3.997132] tegra_aotag tegra-aotag.30: pdiv-ate -- 8
  676. [ 3.997135] tegra_aotag tegra-aotag.30: tsamp-ate -- 39
  677. [ 3.997140] tegra_aotag tegra-aotag.30: compensation A,B -- 10632,-67490
  678. [ 3.997144] tegra_aotag tegra-aotag.30: sensor found :ID 0, Name: aotag0
  679. [ 3.997147] tegra_aotag tegra-aotag.30: reading fuse value for sensor 0
  680. [ 3.997152] tegra_aotag tegra-aotag.30: base-cp:22f shifted-cp:1
  681. [ 3.997155] tegra_aotag tegra-aotag.30: base-ft:4c5 shifted-ft:fffffffe
  682. [ 3.997159] tegra_aotag tegra-aotag.30: actual_aotag_cp 255, ft 1040
  683. [ 3.997164] tegra_aotag tegra-aotag.30: - Tsens calib value - 0x36d3b2f
  684. [ 3.997168] tegra_aotag tegra-aotag.30: CPmask 1fff FTmask 3ffe000
  685. [ 3.997172] tegra_aotag tegra-aotag.30: Tsense calib CP - 0x1b2f
  686. [ 3.997176] tegra_aotag tegra-aotag.30: Tsense Actual CP d.34543
  687. [ 3.997179] tegra_aotag tegra-aotag.30: Tsense calib FT - 0x1b69
  688. [ 3.997182] tegra_aotag tegra-aotag.30: Tsense Actual FT d.37897
  689. [ 3.997186] tegra_aotag tegra-aotag.30: delta ts 3354, temp 785
  690. [ 3.997190] tegra_aotag tegra-aotag.30: thermA-882, thermB--838
  691. [ 3.997194] tegra_aotag tegra-aotag.30: Registering sensor 0
  692. [ 3.997226] tegra_aotag tegra-aotag.30: Bound to TZ : ID 0
  693. [ 3.997233] tegra_aotag tegra-aotag.30: shutdown temperature - 110
  694. [ 3.997237] tegra_aotag tegra-aotag.30: AOTAG EN 60
  695. [ 3.997240] tegra_aotag tegra-aotag.30: Probe done [SUCCESS]:0
  696. [ 3.997490] md: raid0 personality registered for level 0
  697. [ 4.005303] device-mapper: uevent: version 1.0.3
  698. [ 4.015464] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  699. [ 4.034868] Tegra210 cpuidle driver
  700. [ 4.035634] sdhci: Secure Digital Host Controller Interface driver
  701. [ 4.035635] sdhci: Copyright(c) Pierre Ossman
  702. [ 4.035637] sdhci-pltfm: SDHCI platform and OF driver helper
  703. [ 4.035922] mmc0: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
  704. [ 4.035941] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
  705. [ 4.035956] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
  706. [ 4.035959] Could not add sdhci-tegra.3 to power domain using device tree
  707. [ 4.036616] sdhci-tegra sdhci-tegra.3: Speedo value 1952
  708. [ 4.036624] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
  709. [ 4.036721] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19
  710. [ 4.036723] mmc0: no vqmmc regulator found
  711. [ 4.036730] regulator_get() failed for (sdhci-tegra.3,vmmc), -19
  712. [ 4.036732] mmc0: no vmmc regulator found
  713. [ 4.080292] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  714. [ 4.080520] mmc1: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
  715. [ 4.080535] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
  716. [ 4.080537] Could not add sdhci-tegra.1 to power domain using device tree
  717. [ 4.084308] sdhci-tegra sdhci-tegra.1: Speedo value 1952
  718. [ 4.084314] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
  719. [ 4.194072] mmc0: BKOPS_EN bit is not set
  720. [ 4.331586] mmc0: tap value and tuning window after hw tuning completion ...
  721. [ 4.331592] mmc0: tuning_window[0]: 0xffffffff
  722. [ 4.331596] mmc0: tuning_window[1]: 0xfffffff9
  723. [ 4.331600] mmc0: tuning_window[2]: 0xfffffe7f
  724. [ 4.331604] mmc0: tuning_window[3]: 0x7fff8fff
  725. [ 4.331607] mmc0: tuning_window[4]: 0x0
  726. [ 4.331611] mmc0: tuning_window[5]: 0x0
  727. [ 4.331614] mmc0: tuning_window[6]: 0x0
  728. [ 4.331618] mmc0: tuning_window[7]: 0x0
  729. [ 4.331621] sdhci: Tap value: 52 | Trim value: 8
  730. [ 4.331624] sdhci: SDMMC Interrupt status: 0x00040000
  731. [ 4.332104] mmc0: switch to HS400 mode is successful
  732. [ 4.335977] mmc0: new HS400 MMC card at address 0001
  733. [ 4.336395] mmcblk0: mmc0:0001 016G32 14.6 GiB
  734. [ 4.336594] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
  735. [ 4.345994] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
  736. [ 4.780809] hub 1-3:1.0: Cannot enable port 1. Maybe the USB cable is bad?
  737. [ 5.198925] tegradc tegradc.1: hdmi: plugged
  738. [ 5.207895] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19
  739. [ 5.217304] mmc1: no vqmmc regulator found
  740. [ 5.224668] regulator_get() failed for (sdhci-tegra.1,vmmc), -19
  741. [ 5.234018] mmc1: no vmmc regulator found
  742. [ 5.280296] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
  743. [ 5.281169] mmc2: sdhci_tegra_probe line=5737 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
  744. [ 5.281187] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
  745. [ 5.281226] Could not add sdhci-tegra.0 to power domain using device tree
  746. [ 5.281824] sdhci-tegra sdhci-tegra.0: Speedo value 1952
  747. [ 5.281830] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1075, boot_mv 1075, min_or_mv 0
  748. [ 5.281913] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19
  749. [ 5.281915] mmc2: no vqmmc regulator found
  750. [ 5.281922] regulator_get() failed for (sdhci-tegra.0,vmmc), -19
  751. [ 5.281924] mmc2: no vmmc regulator found
  752. [ 5.307476] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
  753. [ 5.320288] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  754. [ 5.320399] gpio wake35 for gpio=201
  755. [ 5.322976] tegra-se tegra21-se: tegra_se_probe: complete
  756. [ 5.323586] hidraw: raw HID events driver (C) Jiri Kosina
  757. [ 5.325081] usbcore: registered new interface driver usbhid
  758. [ 5.325083] usbhid: USB HID core driver
  759. [ 5.325095] tegra_bootloader_debug: Created tegra_bootloader directory
  760. [ 5.325102] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
  761. [ 5.325108] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
  762. [ 5.325428] nvadsp 702ef000.adsp: in probe()...
  763. [ 5.326154] nvadsp 702ef000.adsp: AMC/ARAM initialized.
  764. [ 5.326264] nvadsp 702ef000.adsp: nvadsp_app_module_probe
  765. [ 5.328345] tegra_throttle : init passed
  766. [ 5.329440] cpu-tegra: init EDP limit: 1224 MHz
  767. [ 5.329974] pll_x: not ready for dynamic ramp to 921600000
  768. [ 5.330011] pll_x: not ready for dynamic ramp to 921600000
  769. [ 5.331445] soctherm: prog thresholds
  770. [ 5.331448] soctherm: prog thresholds
  771. [ 5.331451] soctherm: tz:2 not found, skip thresh prog
  772. [ 5.331453] soctherm: prog thresholds
  773. [ 5.331464] soctherm: skipping sensor 4 programming
  774. [ 5.331467] soctherm: skipping sensor 5 programming
  775. [ 5.331472] soctherm: trip_point temp 127500 forced to 127000
  776. [ 5.346555] usbcore: registered new interface driver snd-usb-audio
  777. [ 5.506714] mmc1: tap value and tuning window after hw tuning completion ...
  778. [ 5.506720] mmc1: tuning_window[0]: 0x8fffffff
  779. [ 5.506725] mmc1: tuning_window[1]: 0xffffffff
  780. [ 5.506729] mmc1: tuning_window[2]: 0xffffff8f
  781. [ 5.506734] mmc1: tuning_window[3]: 0x7fff8fff
  782. [ 5.506738] mmc1: tuning_window[4]: 0x0
  783. [ 5.506742] mmc1: tuning_window[5]: 0x0
  784. [ 5.506745] mmc1: tuning_window[6]: 0x0
  785. [ 5.506749] mmc1: tuning_window[7]: 0x0
  786. [ 5.506752] sdhci: Tap value: 49 | Trim value: 8
  787. [ 5.506756] sdhci: SDMMC Interrupt status: 0x00040000
  788. [ 5.510207] mmc1: new ultra high speed SDR104 SDIO card at address 0001
  789. [ 5.701018] tegra-i2c 7000c000.i2c: no acknowledge from address 0x1b
  790. [ 5.701086] rt5659 0-001b: Device with ID register fdc83400 is not rt5659
  791. [ 5.709983] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
  792. [ 5.710749] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
  793. [ 5.710934] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
  794. [ 5.711193] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
  795. [ 5.715726] OPE platform probe
  796. [ 5.715901] OPE platform probe successful
  797. [ 5.715935] OPE platform probe
  798. [ 5.716113] OPE platform probe successful
  799. [ 5.716281] tegra210_adsp_audio_platform_probe: platform probe started
  800. [ 5.717576] tegra210-adsp adsp_audio.3: Default param-type to BYTE for mp3-dec1
  801. [ 5.717833] tegra210-adsp adsp_audio.3: Default param-type to BYTE for spkprot
  802. [ 5.718167] tegra210-adsp adsp_audio.3: Default param-type to BYTE for src
  803. [ 5.718440] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aac-dec1
  804. [ 5.718790] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aec
  805. [ 5.720171] tegra210_adsp_audio_platform_probe probe successfull.
  806. [ 5.720171] tegra-snd-t210ref-mobile-rt565x sound.27: Failed to get HP Det GPIO,should be handled by codec
  807. [ 5.741553] usb 1-3.1: new low-speed USB device number 4 using tegra-xhci
  808. [ 5.763665] usb 1-3.1: New USB device found, idVendor=ffc0, idProduct=0001
  809. [ 5.763671] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  810. [ 5.767656] input: HID ffc0:0001 as /devices/platform/tegra-xhci/usb1/1-3/1-3.1/1-3.1:1.0/input/input0
  811. [ 5.767896] hid-generic 0003:FFC0:0001.0001: input,hidraw0: USB HID v1.10 Mouse [HID ffc0:0001] on usb-tegra-xhci-3.1/input0
  812. [ 5.783748] tegra210-ape-admaif tegra210-admaif: ASoC: Failed to create codec debugfs directory
  813. [ 5.785230] tegra210-adsp adsp_audio.3: ASoC: Failed to create platform debugfs directory
  814. [ 5.817480] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF1 <-> ADMAIF1 mapping ok
  815. [ 5.818617] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF2 <-> ADMAIF2 mapping ok
  816. [ 5.819745] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF3 <-> ADMAIF3 mapping ok
  817. [ 5.820895] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF4 <-> ADMAIF4 mapping ok
  818. [ 5.822020] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF5 <-> ADMAIF5 mapping ok
  819. [ 5.823148] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF6 <-> ADMAIF6 mapping ok
  820. [ 5.824274] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF7 <-> ADMAIF7 mapping ok
  821. [ 5.825387] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF8 <-> ADMAIF8 mapping ok
  822. [ 5.826506] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF9 <-> ADMAIF9 mapping ok
  823. [ 5.827626] tegra-snd-t210ref-mobile-rt565x sound.27: ADMAIF10 <-> ADMAIF10 mapping ok
  824. [ 5.891831] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE1 <-> ADSP PCM1 mapping ok
  825. [ 5.892245] tegra-snd-t210ref-mobile-rt565x sound.27: ADSP-FE2 <-> ADSP PCM2 mapping ok
  826. [ 5.892561] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
  827. [ 5.892970] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
  828. [ 5.903839] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO L Playback
  829. [ 5.903845] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO L Playback -> direct -> x Headphone Jack
  830. [ 5.903874] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO R Playback
  831. [ 5.903879] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO R Playback -> direct -> x Headphone Jack
  832. [ 5.903906] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x MICBIAS1
  833. [ 5.903911] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x MICBIAS1
  834. [ 5.903938] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x IN1P
  835. [ 5.903942] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x IN1P
  836. [ 5.903969] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x Mic Det Power
  837. [ 5.903973] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x Mic Det Power
  838. [ 5.904000] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x SPO Playback
  839. [ 5.904005] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x SPO Playback -> direct -> x Int Spk
  840. [ 5.904032] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L1
  841. [ 5.904036] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L1
  842. [ 5.904063] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L2
  843. [ 5.904067] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L2
  844. [ 5.904093] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R1
  845. [ 5.904098] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R1
  846. [ 5.904123] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R2
  847. [ 5.904128] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R2
  848. [ 5.917535] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/platform/sound.27/sound/card1/input1
  849. [ 5.921081] tegra-snd-t210ref-mobile-rt565x sound.27: codec-dai "dit-hifi" registered
  850. [ 5.921087] tegra-snd-t210ref-mobile-rt565x sound.27: This is a dummy codec
  851. [ 5.926539] GACT probability NOT on
  852. [ 5.926547] Mirror/redirect action on
  853. [ 5.926551] u32 classifier
  854. [ 5.926552] Actions configured
  855. [ 5.926557] Netfilter messages via NETLINK v0.30.
  856. [ 5.926607] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  857. [ 5.950171] ctnetlink v0.93: registering with nfnetlink.
  858. [ 5.950312] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  859. [ 5.950314] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  860. [ 5.964875] xt_time: kernel timezone is -0000
  861. [ 5.964983] ipip: IPv4 over IPv4 tunneling driver
  862. [ 5.965375] ip_tables: (C) 2000-2006 Netfilter Core Team
  863. [ 5.965538] arp_tables: (C) 2002 David S. Miller
  864. [ 5.965577] TCP: cubic registered
  865. [ 5.965582] Initializing XFRM netlink socket
  866. [ 6.022622] NET: Registered protocol family 10
  867. [ 6.056113] mip6: Mobile IPv6
  868. [ 6.056138] ip6_tables: (C) 2000-2006 Netfilter Core Team
  869. [ 6.056273] sit: IPv6 over IPv4 tunneling driver
  870. [ 6.056920] NET: Registered protocol family 17
  871. [ 6.056941] NET: Registered protocol family 15
  872. [ 6.067173] Bridge firewalling registered
  873. [ 6.067183] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  874. [ 6.067193] Bluetooth: HIDP socket layer initialized
  875. [ 6.067217] NET: Registered protocol family 35
  876. [ 6.078183] Key type dns_resolver registered
  877. [ 6.078187] NET: Registered protocol family 41
  878. [ 6.090878] Registering SWP/SWPB emulation handler
  879. [ 6.114728] isp isp.0: initialized
  880. [ 6.116063] isp isp.1: initialized
  881. [ 6.116364] vdd_gpu: disabling
  882. [ 6.116368] en-vdd-cam-1v2-alt: disabling
  883. [ 6.116370] en-vdd-vcm-2v8: disabling
  884. [ 6.116373] en-vdd-cam-1v2: disabling
  885. [ 6.116377] en-vdd-cam-hv-2v8: disabling
  886. [ 6.116380] en-vdd-disp-1v8: disabling
  887. [ 6.116550] en-mdm-pwr-3v7: disabling
  888. [ 6.116554] en-vdd-disp-3v3: disabling
  889. [ 6.116699] en-vdd-ts-hv-3v3: disabling
  890. [ 6.116702] en-vdd-ts-1v8: disabling
  891. [ 6.116705] usb-vbus3: disabling
  892. [ 6.116708] usb-vbus1: disabling
  893. [ 6.116710] vdd-fan: disabling
  894. [ 6.122915] vdd-disp-3v0: disabling
  895. [ 6.122920] snsr_pm: disabling
  896. [ 6.122922] aux-3v3: disabling
  897. [ 6.122926] en-vdd-cam: disabling
  898. [ 6.122929] en-vdd-sd: disabling
  899. [ 6.127812] lcd-bl-en: disabling
  900. [ 6.127816] max77620-gpio7: disabling
  901. [ 6.139393] vdd-cpu-fixed: disabling
  902. [ 6.139398] regulator-dummy: disabling
  903. [ 6.141156] gpio wake24 for gpio=189
  904. [ 6.141233] gpio wake27 for gpio=192
  905. [ 6.141283] gpio wake25 for gpio=190
  906. [ 6.141457] input: gpio-keys as /devices/platform/gpio-keys.47/input/input2
  907. [ 6.167142] tegra-rtc 7000e000.rtc: setting system clock to 2017-05-16 09:30:46 UTC (1494927046)
  908. [ 6.167296] vi vi: vi_probe: ++
  909. [ 6.169419] vi vi: initialized
  910. [ 6.169810] vi vi: parsing node /host1x/vi
  911. [ 6.169817] vi vi: handling endpoint /host1x/vi/ports/port@0/endpoint
  912. [ 6.169858] vi vi: handling endpoint /host1x/vi/ports/port@1/endpoint
  913. [ 6.169891] vi vi: handling endpoint /host1x/vi/ports/port@2/endpoint
  914. [ 6.169921] vi vi: handling endpoint /host1x/vi/ports/port@3/endpoint
  915. [ 6.169951] vi vi: handling endpoint /host1x/vi/ports/port@4/endpoint
  916. [ 6.169977] vi vi: handling endpoint /host1x/vi/ports/port@5/endpoint
  917. [ 6.170003] vi vi: parsing node /host1x/i2c@546c0000/ov5693_c@36
  918. [ 6.170010] vi vi: handling endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
  919. [ 6.170034] vi vi: subdev ov5693 6-0036 bound
  920. [ 6.170051] vi vi: notify complete, all subdevs registered
  921. [ 6.170055] vi vi: creating links for entity ov5693 6-0036
  922. [ 6.170061] vi vi: processing endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
  923. [ 6.170083] vi vi: skipping channel port /host1x/i2c@546c0000/ov5693_c@36:0
  924. [ 6.170088] vi vi: creating links for channels
  925. [ 6.170094] vi vi: processing endpoint /host1x/vi/ports/port@0/endpoint
  926. [ 6.170118] vi vi: creating link for channel vi-output-2
  927. [ 6.170123] vi vi: creating ov5693 6-0036:0 -> vi-output-2:0 link
  928. [ 6.170895] [dram-timers] DRAM derating cdev registered.
  929. [ 6.170903] Disable partitions left on by BL
  930. [ 6.170906] sata
  931. [ 6.171033] disb
  932. [ 6.171057] Disabling clocks left on by bootloader:
  933. [ 6.171058] audio2_dmic
  934. [ 6.171061] audio1_dmic
  935. [ 6.171064] audio0_dmic
  936. [ 6.171067] audio_2x
  937. [ 6.171073] audio
  938. [ 6.171076] audio4
  939. [ 6.171079] audio3
  940. [ 6.171082] audio2
  941. [ 6.171085] audio1
  942. [ 6.171088] audio0
  943. [ 6.171148] entropy
  944. [ 6.171157] dsi2-fixed
  945. [ 6.171159] dsi1-fixed
  946. [ 6.171175] sdmmc4_ddr
  947. [ 6.171183] sdmmc1_ddr
  948. [ 6.171218] cclk_lp
  949. [ 6.171867] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully
  950. [ 6.172020] tune_cpu_trimmers: init soctherm cpu zone LOW
  951. [ 6.172124] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
  952. [ 6.172194] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered
  953. [ 6.172462] Tegra CPU DFLL is initialized with use_dfll = 1
  954. [ 6.172585] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator
  955. [ 6.172812] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator
  956. [ 6.172926] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator
  957. [ 6.173403] CPU rate: 921 MHz
  958. [ 6.173665] last reset is due to software reset
  959.  
  960. [ 6.173667] KERNEL: PMC reset status reg: 0x3
  961. [ 6.174314] tegra_actmon.emc: Completed initialization (0)
  962. [ 6.174744] tegra_actmon.avp: Completed initialization (0)
  963. [ 6.353448] tegra dvfs: tegra sysfs cap interface is initialized
  964. [ 6.353504] tegra dvfs: tegra sysfs gpu & emc interface is initialized
  965. [ 6.354442] Set maximum possible CPU frequency 1734000
  966. [ 6.354481] ALSA device list:
  967. [ 6.354484] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
  968. [ 6.354485] #1: tegra-snd-t210ref-mobile-rt565x
  969. [ 6.401422] usb 1-3.3: new low-speed USB device number 6 using tegra-xhci
  970. [ 6.425472] usb 1-3.3: New USB device found, idVendor=0e8f, idProduct=0022
  971. [ 6.425477] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  972. [ 6.425481] usb 1-3.3: Product: USB KB V11
  973. [ 6.425483] usb 1-3.3: Manufacturer: GASIA
  974. [ 6.425707] usb 1-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  975. [ 6.425732] usb 1-3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  976. [ 6.428708] input: GASIA USB KB V11 as /devices/platform/tegra-xhci/usb1/1-3/1-3.3/1-3.3:1.0/input/input3
  977. [ 6.428863] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-tegra-xhci-3.3/input0
  978. [ 6.433626] input: GASIA USB KB V11 as /devices/platform/tegra-xhci/usb1/1-3/1-3.3/1-3.3:1.1/input/input4
  979. [ 6.433797] hid-generic 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Device [GASIA USB KB V11] on usb-tegra-xhci-3.3/input1
  980. [ 7.285429] Freeing unused kernel memory: 428K (ffffffc00114f000 - ffffffc0011ba000)
  981. [ 7.295552] Freeing alternatives memory: 52K (ffffffc0011bb000 - ffffffc0011c8000)
  982. [ 7.347756] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  983. [ 7.445339] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  984. [ 7.466369] systemd[1]: Detected architecture arm64.
  985. [ 7.501310] systemd[1]: Set hostname to <tegra-ubuntu>.
  986. [ 7.667768] systemd[1]: Reached target Remote File Systems (Pre).
  987. [ 7.690355] systemd[1]: Reached target User and Group Name Lookups.
  988. [ 7.720445] systemd[1]: Listening on Journal Socket (/dev/log).
  989. [ 7.750450] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  990. [ 7.780499] systemd[1]: Listening on Syslog Socket.
  991. [ 7.800405] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  992. [ 7.830393] systemd[1]: Reached target Swap.
  993. [ 7.850431] systemd[1]: Listening on Journal Socket.
  994. [ 7.870422] systemd[1]: Listening on LVM2 metadata daemon socket.
  995. [ 7.900456] systemd[1]: Reached target Encrypted Volumes.
  996. [ 7.930575] systemd[1]: Created slice User and Session Slice.
  997. [ 7.960432] systemd[1]: Listening on udev Control Socket.
  998. [ 7.990442] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  999. [ 8.020390] systemd[1]: Listening on LVM2 poll daemon socket.
  1000. [ 8.050405] systemd[1]: Listening on udev Kernel Socket.
  1001. [ 8.080653] systemd[1]: Created slice System Slice.
  1002. [ 8.101368] systemd[1]: Starting Remount Root and Kernel File Systems...
  1003. [ 8.133077] systemd[1]: Starting Load Kernel Modules...
  1004. [ 8.149622] gpio wake52 for gpio=61
  1005. [ 8.161490] systemd[1]: Mounting POSIX Message Queue File System...
  1006. [ 8.191574] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  1007. [ 8.220395] systemd[1]: Reached target Slices.
  1008. [ 8.242998] systemd[1]: Starting Journal Service...
  1009. [ 8.271593] systemd[1]: Mounting Debug File System...
  1010. [ 8.301465] systemd[1]: Starting Set console keymap...
  1011. [ 8.321884] systemd[1]: Started Braille Device Support.
  1012. [ 8.353792] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  1013. [ 8.390704] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1014. [ 8.420413] systemd[1]: Reached target Remote File Systems.
  1015. [ 8.452904] systemd[1]: Mounted POSIX Message Queue File System.
  1016. [ 8.480584] systemd[1]: Mounted Debug File System.
  1017. [ 8.500517] systemd[1]: Started Journal Service.
  1018. [ 8.974840] systemd-journald[174]: Received request to flush runtime journal from PID 1
  1019. [ 9.622837] cfg80211: Calling CRDA to update world regulatory domain
  1020. [ 9.660262] sdhci-tegra sdhci-tegra.1: Card already in requested state
  1021. [ 9.660318] sdhci-tegra sdhci-tegra.1: Card already in requested state
  1022. [ 9.778024] dhd_module_init in
  1023. [ 9.778996] Power-up adapter 'DHD generic adapter'
  1024. [ 9.780792] wifi_platform_set_power = 1
  1025. [ 9.990301] wifi_platform_bus_enumerate device present 1
  1026. [ 10.006618] wifi_platform_bus_enumerate device present 0
  1027. [ 10.007051] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
  1028. [ 10.007235] F1 signature read @0x18000000=0x17214354
  1029. [ 10.012474] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
  1030. [ 10.013205] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  1031. [ 10.013289] wifi_platform_prealloc: failed to alloc static mem section 7
  1032. [ 10.013300] wifi_platform_get_mac_addr
  1033. [ 10.013690] of_get_mac_address: checking /chosen dtb node for mac address property nvidia,wifi-mac
  1034. [ 10.013808] wifi_get_mac_addr: 00:04:4b:5a:cd:e5
  1035. [ 10.015024] wl_setup_wiphy : Registering Vendor80211
  1036. [ 10.025467] wl_create_event_handler(): thread:wl_event_handler:1e9 started
  1037. [ 10.025599] wl_event_handler : tsk Enter, tsk = 0xffffffc0efec19f0
  1038. [ 10.030477] dhd_attach(): thread:dhd_watchdog_thread:1ec started
  1039. [ 10.040475] dhd_attach(): thread:dhd_dpc:1ef started
  1040. [ 10.046136] dhd_attach(): thread:dhd_rxf:1f9 started
  1041. [ 10.046151] dhd_deferred_work_init: work queue initialized
  1042. [ 10.046513] Dongle Host Driver, version 1.201.82 (r)
  1043. Compiled in drivers/net/wireless/bcmdhd on Nov 9 2016 at 19:41:48
  1044. [ 10.046868] Register interface [wlan0] MAC: 00:04:4b:5a:cd:e5
  1045.  
  1046. [ 10.046878] dhd_prot_ioctl : bus is down. we have nothing to do
  1047. [ 10.048160] wifi_platform_set_power = 0
  1048. [ 10.250316] tegra_sysfs_register
  1049. [ 10.628670] cfg80211: World regulatory domain updated:
  1050. [ 10.628680] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1051. [ 10.628687] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  1052. [ 10.628692] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  1053. [ 10.628697] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  1054. [ 10.628702] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  1055. [ 10.628706] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  1056. [ 10.628711] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
  1057. [ 10.628715] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  1058. [ 10.628719] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  1059. [ 11.572757]
  1060. Dongle Host Driver, version 1.201.82 (r)
  1061. Compiled in drivers/net/wireless/bcmdhd on Nov 9 2016 at 19:41:48
  1062. [ 11.572767] wl_android_wifi_on in
  1063. [ 11.572772] wifi_platform_set_power = 1
  1064. [ 11.602790] gk20a gpu.0: GPCPLL initial settings: NA mode, M=1, N=34, P=3
  1065. [ 11.749595] tegradc tegradc.1: blank - powerdown
  1066. [ 11.778921] tegradc tegradc.1: unblank
  1067. [ 11.832151] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
  1068. [ 11.857340] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
  1069. [ 11.923862] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 49
  1070. [ 11.924562] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
  1071. [ 11.924806] F1 signature read @0x18000000=0x17214354
  1072. [ 11.933077] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
  1073. [ 11.934272] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  1074. [ 12.036821] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1075. [ 12.099014] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
  1076. [ 12.099059] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1077. [ 12.099549] gpio wake8 for gpio=58
  1078. [ 12.099551] Enabling wake8
  1079. [ 12.101891] wifi_platform_get_mac_addr
  1080. [ 12.102156] wifi_get_mac_addr: 00:04:4b:5a:cd:e5
  1081. [ 12.104428] Firmware up: op_mode=0x0005, MAC=00:04:4b:5a:cd:e5
  1082. [ 12.113458] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
  1083. [ 12.120545] Firmware version = wl0: Mar 8 2016 12:52:17 version 7.35.221.11 (r623264) FWID 01-b55daaf2
  1084. [ 12.124251] dhd_interworking_enable: failed to set WNM info, ret=-23
  1085. [ 12.124588] tegra_sysfs_on
  1086. [ 12.183885] tegradc tegradc.1: unblank
  1087. [ 12.320710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1088. [ 12.465266] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
  1089. [ 12.482404] WLC_E_IF: NO_IF set, event Ignored
  1090. [ 12.696437] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1091. [ 12.737994] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1092. [ 12.755578] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1093. [ 12.774797] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1094. [ 12.776713] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1095. [ 12.779635] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1096. [ 12.791913] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1097. [ 12.793949] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1098. [ 12.807098] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1099. [ 12.828264] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
  1100. [ 14.008335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1101. [ 14.008363] Bluetooth: BNEP socket layer initialized
  1102. [ 15.008506] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1103. [ 16.993821] tegradc tegradc.1: blank - powerdown
  1104. [ 17.001295] tegradc tegradc.1: unblank
  1105. [ 17.059153] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
  1106. [ 17.413059] tegradc tegradc.1: unblank
  1107. [ 84.411519] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Advertisement
RAW Paste Data Copied
Advertisement