wlan

1,2c1,2
< Linux version 5.10.61-gentoo-x86_64 (root@catalyst) (x86_64-pc-linux-gnu-gcc (Gentoo 10.3.0-r2 p3) 10.3.0, GNU ld (Gentoo 2.37_p1 p0) 2.37) #1 SMP Sun Sep 26 17:37:31 UTC 2021
< Command line: BOOT_IMAGE=/boot/gentoo root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
---
> Linux version 5.10.61-gentoo (root@GentooMini) (gcc (Gentoo 11.2.0 p1) 11.2.0, GNU ld (Gentoo 2.37_p1 p0) 2.37) #11 SMP Mon Oct 18 22:27:30 CEST 2021
> Command line: BOOT_IMAGE=/vmlinuz-5.10.61-gentoo root=/dev/nvme0n1p6 ro
33c33
< tsc: Detected 2096.186 MHz processor
---
> tsc: Detected 2096.167 MHz processor
54a55
> check: Scanning 1 areas for low memory corruption
57d57
< RAMDISK: [mem 0x36ed7000-0x37762fff]
107a108,110
> No NUMA configuration found
> Faking a node at [mem 0x0000000000000000-0x00000001beffffff]
> NODE_DATA(0) allocated [mem 0x1beffa000-0x1beffdfff]
122c125
<   DMA zone: 56 pages used for memmap
---
>   DMA zone: 64 pages used for memmap
125c128
<   DMA32 zone: 10321 pages used for memmap
---
>   DMA32 zone: 11795 pages used for memmap
127c130
<   Normal zone: 10696 pages used for memmap
---
>   Normal zone: 12224 pages used for memmap
153a157
> e820: update [mem 0xb3e21000-0xb3f14fff] usable ==> reserved
154a159,177
> PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> PM: hibernation: Registered nosave memory: [mem 0x09c00000-0x09cd0fff]
> PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0afff]
> PM: hibernation: Registered nosave memory: [mem 0xb3e21000-0xb3f14fff]
> PM: hibernation: Registered nosave memory: [mem 0xb857e000-0xb877dfff]
> PM: hibernation: Registered nosave memory: [mem 0xb877e000-0xbc77dfff]
> PM: hibernation: Registered nosave memory: [mem 0xbc77e000-0xbe77dfff]
> PM: hibernation: Registered nosave memory: [mem 0xbe77e000-0xbe7fdfff]
> PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
> PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
> PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfd1fffff]
> PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
> PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfed7ffff]
> PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
> PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xffffffff]
156,157c179
< Booting paravirtualized kernel on bare hardware
< clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
---
> clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
159,160c181,182
< percpu: Embedded 51 pages/cpu s171992 r8192 d28712 u262144
< pcpu-alloc: s171992 r8192 d28712 u262144 alloc=1*2097152
---
> percpu: Embedded 51 pages/cpu s171928 r8192 d28776 u262144
> pcpu-alloc: s171928 r8192 d28776 u262144 alloc=1*2097152
162,163c184,186
< Built 1 zonelists, mobility grouping on.  Total pages: 1520091
< Kernel command line: BOOT_IMAGE=/boot/gentoo root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
---
> Built 1 zonelists, mobility grouping on.  Total pages: 1517081
> Policy zone: Normal
> Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.61-gentoo root=/dev/nvme0n1p6 ro
167c190,191
< Memory: 5879052K/6164744K available (8201K kernel code, 2156K rwdata, 2432K rodata, 1108K init, 692K bss, 285436K reserved, 0K cma-reserved)
---
> Memory: 5857252K/6164744K available (16397K kernel code, 2579K rwdata, 4236K rodata, 1188K init, 2484K bss, 307232K reserved, 0K cma-reserved)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
168a193
> rcu: 	RCU event tracing is enabled.
170c195
< rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
---
> rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
173c198
< random: get_random_bytes called from start_kernel+0x366/0x550 with crng_init=0
---
> random: get_random_bytes called from start_kernel+0x354/0x524 with crng_init=0
181,182c206,207
< clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e371d8a0e5, max_idle_ns: 440795265679 ns
< Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.37 BogoMIPS (lpj=20961860)
---
> clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e370bb546f, max_idle_ns: 440795256759 ns
> Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.33 BogoMIPS (lpj=2096167)
184a210
> SELinux:  Initializing.
196c222
< Freeing SMP alternatives memory: 16K
---
> Freeing SMP alternatives memory: 44K
211c237
< Measured 2751932421 cycles TSC warp between CPUs, turning off TSC clock.
---
> Measured 2751604317 cycles TSC warp between CPUs, turning off TSC clock.
216c242
< smpboot: Total of 8 processors activated (33538.97 BogoMIPS)
---
> smpboot: Total of 8 processors activated (33538.67 BogoMIPS)
218c244,246
< clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
---
> PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0afff] (45056 bytes)
> PM: Registering ACPI NVS region [mem 0xbc77e000-0xbe77dfff] (33554432 bytes)
> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
220a249
> PM: RTC time: 15:49:46, date: 2021-10-19
223c252
< audit: type=2000 audit(1634656937.170:1): state=initialized audit_enabled=0 res=1
---
> audit: type=2000 audit(1634658585.115:1): state=initialized audit_enabled=0 res=1
225,226c254
< thermal_sys: Registered thermal governor 'user_space'
< cpuidle: using governor ladder
---
> cpuidle: using governor menu
229d256
< dca service started, version 1.12.1
232a260,264
> Kprobes globally optimized
> HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> cryptomgr_test (56) used greatest stack depth: 15720 bytes left
> cryptomgr_test (64) used greatest stack depth: 15712 bytes left
> cryptd: max_cpu_qlen set to 1000
247c279
< ACPI: (supports S0 S5)
---
> ACPI: (supports S0 S3 S4 S5)
254c286
< acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
---
> acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
338d369
< pci_bus 0000:00: on NUMA node 0
358a390
> libata version 3.00 loaded.
362a395,397
> pps_core: LinuxPPS API ver. 1 registered
> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> PTP clock support registered
363a399,409
> Advanced Linux Sound Architecture Driver Initialized.
> Bluetooth: Core ver 2.22
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> NetLabel:  unlabeled traffic allowed by default
368a415
> e820: reserve RAM buffer [mem 0xb3e21000-0xb3ffffff]
371a419,420
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 comparators, 32-bit 14.318180 MHz counter
449,452c498,528
< Trying to unpack rootfs image as initramfs...
< Freeing initrd memory: 8752K
< PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
< software IO TLB: mapped [mem 0x00000000af4c6000-0x00000000b34c6000] (64MB)
---
> AMD-Vi: ivrs, add hid:PNP0D40, uid:, rdevid:152
> pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
> pci 0000:00:00.2: can't derive routing for PCI INT A
> pci 0000:00:00.2: PCI INT A: not connected
> pci 0000:00:01.0: Adding to iommu group 0
> pci 0000:00:01.1: Adding to iommu group 1
> pci 0000:00:01.2: Adding to iommu group 2
> pci 0000:00:08.0: Adding to iommu group 3
> pci 0000:00:08.1: Adding to iommu group 4
> pci 0000:00:14.0: Adding to iommu group 5
> pci 0000:00:14.3: Adding to iommu group 5
> pci 0000:00:18.0: Adding to iommu group 6
> pci 0000:00:18.1: Adding to iommu group 6
> pci 0000:00:18.2: Adding to iommu group 6
> pci 0000:00:18.3: Adding to iommu group 6
> pci 0000:00:18.4: Adding to iommu group 6
> pci 0000:00:18.5: Adding to iommu group 6
> pci 0000:00:18.6: Adding to iommu group 6
> pci 0000:00:18.7: Adding to iommu group 6
> pci 0000:01:00.0: Adding to iommu group 7
> pci 0000:02:00.0: Adding to iommu group 8
> pci 0000:03:00.0: Adding to iommu group 9
> pci 0000:03:00.1: Adding to iommu group 10
> pci 0000:03:00.2: Adding to iommu group 10
> pci 0000:03:00.3: Adding to iommu group 10
> pci 0000:03:00.4: Adding to iommu group 10
> pci 0000:03:00.5: Adding to iommu group 10
> pci 0000:03:00.6: Adding to iommu group 10
> pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
> AMD-Vi: Extended features (0x4f77ef22294ada): PPR NX GT IA GA PC GA_vAPIC
> AMD-Vi: Lazy IO/TLB flushing enabled
456a533,535
> perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
> check: Scanning for low memory corruption every 60 seconds
> cryptomgr_test (99) used greatest stack depth: 15680 bytes left
458,459c537
< workingset: timestamp_bits=62 max_order=21 bucket_order=0
< squashfs: version 4.0 (2009/01/31) Phillip Lougher
---
> workingset: timestamp_bits=56 max_order=21 bucket_order=0
462a541,543
> ntfs: driver 2.1.32 [Flags: R/W DEBUG].
> fuse: init (API version 7.32)
> NET: Registered protocol family 38
465c546
< Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
---
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
468,472c549,551
< pcieport 0000:00:01.1: PME: Signaling with IRQ 25
< pcieport 0000:00:01.1: AER: enabled with IRQ 25
< pcieport 0000:00:01.2: PME: Signaling with IRQ 26
< pcieport 0000:00:01.2: AER: enabled with IRQ 26
< pcieport 0000:00:08.1: PME: Signaling with IRQ 27
---
> pcieport 0000:00:01.1: PME: Signaling with IRQ 26
> pcieport 0000:00:01.2: PME: Signaling with IRQ 27
> pcieport 0000:00:08.1: PME: Signaling with IRQ 28
479a559,568
> ACPI: AC Adapter [ADP0] (on-line)
> input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> ACPI: Lid Switch [LID]
> input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> ACPI: Power Button [PWRF]
> ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
> acpi device:08: registered as cooling_device0
> input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input3
489d577
< ioatdma: Intel(R) QuickData Technology Driver 5.00
490a579
> Non-volatile memory driver v1.3
492d580
< brd: module loaded
494,558d581
< Loading iSCSI transport class v2.0-870.
< st: Version 20160209, fixed bufsize 32768, s/g segs 256
< SCSI Media Changer driver v0.25
< jme: JMicron JMC2XX ethernet driver version 1.0.8
< i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
< i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
< serio: i8042 KBD port at 0x60,0x64 irq 1
< mousedev: PS/2 mouse device common for all mice
< rtc_cmos 00:01: RTC can wake from S4
< rtc_cmos 00:01: registered as rtc0
< rtc_cmos 00:01: setting system clock to 2021-10-19T15:22:18 UTC (1634656938)
< rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
< IR NEC protocol handler initialized
< IR RC5(x/sz) protocol handler initialized
< IR RC6 protocol handler initialized
< IR JVC protocol handler initialized
< IR Sony protocol handler initialized
< IR SANYO protocol handler initialized
< IR Sharp protocol handler initialized
< IR MCE Keyboard/mouse protocol handler initialized
< IR XMP protocol handler initialized
< ir_imon_decoder: IR iMON protocol handler initialized
< IR RCMM protocol handler initialized
< hid: raw HID events driver (C) Jiri Kosina
< usbcore: registered new interface driver usbhid
< input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
< usbhid: USB HID core driver
< NET: Registered protocol family 17
< Key type dns_resolver registered
< microcode: CPU0: patch_level=0x08108109
< microcode: CPU1: patch_level=0x08108109
< microcode: CPU2: patch_level=0x08108109
< microcode: CPU3: patch_level=0x08108109
< microcode: CPU4: patch_level=0x08108109
< microcode: CPU5: patch_level=0x08108109
< microcode: CPU6: patch_level=0x08108109
< microcode: CPU7: patch_level=0x08108109
< microcode: Microcode Update Driver: v2.2.
< IPI shorthand broadcast: enabled
< registered taskstats version 1
< Loading compiled-in X.509 certificates
< Unstable clock detected, switching default tracing clock to "global"
< If you want to keep using the local clock, then add:
<   "trace_clock=local"
< on the kernel command line
< Freeing unused kernel image (initmem) memory: 1108K
< Write protecting the kernel read-only data: 14336k
< Freeing unused kernel image (text/rodata gap) memory: 2036K
< Freeing unused kernel image (rodata/data gap) memory: 1664K
< Run /init as init process
<   with arguments:
<     /init
<     dokeymap
<     cdroot
<   with environment:
<     HOME=/
<     TERM=linux
<     BOOT_IMAGE=/boot/gentoo
<     looptype=squashfs
<     loop=/image.squashfs
< udevd[1070]: starting version 3.2.10
< random: udevd: uninitialized urandom read (16 bytes read)
< random: udevd: uninitialized urandom read (16 bytes read)
< random: udevd: uninitialized urandom read (16 bytes read)
< udevd[1071]: starting eudev-3.2.10
559a583,601
> rtw_8822ce 0000:02:00.0: enabling device (0000 -> 0003)
> nvme nvme0: missing or invalid SUBNQN field.
> Loading firmware: rtw88/rtw8822c_fw.bin
> rtw_8822ce 0000:02:00.0: Direct firmware load for rtw88/rtw8822c_fw.bin failed with error -2
> rtw_8822ce 0000:02:00.0: failed to request firmware
> Loading firmware: rtw88/rtw8822c_wow_fw.bin
> rtw_8822ce 0000:02:00.0: failed to load firmware
> rtw_8822ce 0000:02:00.0: Direct firmware load for rtw88/rtw8822c_wow_fw.bin failed with error -2
> rtw_8822ce 0000:02:00.0: failed to setup chip efuse info
> rtw_8822ce 0000:02:00.0: failed to request firmware
> rtw_8822ce 0000:02:00.0: failed to setup chip information
> rtw_8822ce: probe of 0000:02:00.0 failed with error -22
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci-pci: EHCI PCI platform driver
> nvme nvme0: 16/0/0 default/read/poll queues
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci-pci: OHCI PCI platform driver
> uhci_hcd: USB Universal Host Controller Interface driver
>  nvme0n1: p1 p2 p3 p4 p5 p6 p7
564d605
< cryptd: max_cpu_qlen set to 1000
567c608
< usb usb1: Manufacturer: Linux 5.10.61-gentoo-x86_64 xhci-hcd
---
> usb usb1: Manufacturer: Linux 5.10.61-gentoo xhci-hcd
578c619
< usb usb2: Manufacturer: Linux 5.10.61-gentoo-x86_64 xhci-hcd
---
> usb usb2: Manufacturer: Linux 5.10.61-gentoo xhci-hcd
583,584d623
< AVX2 version of gcm_enc/dec engaged.
< AES CTR mode by8 optimization enabled
591c630
< usb usb3: Manufacturer: Linux 5.10.61-gentoo-x86_64 xhci-hcd
---
> usb usb3: Manufacturer: Linux 5.10.61-gentoo xhci-hcd
602c641
< usb usb4: Manufacturer: Linux 5.10.61-gentoo-x86_64 xhci-hcd
---
> usb usb4: Manufacturer: Linux 5.10.61-gentoo xhci-hcd
606,609c645,723
< nvme nvme0: missing or invalid SUBNQN field.
< nvme nvme0: 16/0/0 default/read/poll queues
<  nvme0n1: p1 p2 p3 p4 p5 p6 p7
< usb 3-1: new high-speed USB device number 2 using xhci_hcd
---
> usbcore: registered new interface driver usblp
> usbcore: registered new interface driver usb-storage
> i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
> i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> serio: i8042 KBD port at 0x60,0x64 irq 1
> rtc_cmos 00:01: RTC can wake from S4
> rtc_cmos 00:01: registered as rtc0
> rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
> EFI Variables Facility v0.08 2004-May-17
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> battery: ACPI: Battery Slot [BAT0] (battery present)
> hid: raw HID events driver (C) Jiri Kosina
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input5
> snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
> snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
> Initializing XFRM netlink socket
> NET: Registered protocol family 10
> Segment Routing with IPv6
> hdaudio hdaudioC0D0: Unable to bind the codec
> sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> NET: Registered protocol family 17
> Key type dns_resolver registered
> microcode: CPU0: patch_level=0x08108109
> microcode: CPU1: patch_level=0x08108109
> microcode: CPU2: patch_level=0x08108109
> microcode: CPU3: patch_level=0x08108109
> random: fast init done
> microcode: CPU4: patch_level=0x08108109
> hdaudio hdaudioC1D0: Unable to bind the codec
> microcode: CPU5: patch_level=0x08108109
> microcode: CPU6: patch_level=0x08108109
> microcode: CPU7: patch_level=0x08108109
> microcode: Microcode Update Driver: v2.2.
> IPI shorthand broadcast: enabled
> AVX2 version of gcm_enc/dec engaged.
> AES CTR mode by8 optimization enabled
> registered taskstats version 1
> Loading compiled-in X.509 certificates
> kworker/u32:0 (155) used greatest stack depth: 14752 bytes left
> Key type encrypted registered
> PM:   Magic number: 9:830:841
> printk: console [netcon0] enabled
> netconsole: network logging started
> acpi_cpufreq: overriding BIOS provided _PSD data
> cfg80211: Loading compiled-in X.509 certificates for regulatory database
> cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> Unstable clock detected, switching default tracing clock to "global"
> If you want to keep using the local clock, then add:
>   "trace_clock=local"
> on the kernel command line
> Loading firmware: regulatory.db
> platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
> ALSA device list:
> cfg80211: failed to load regulatory.db
>   No soundcards found.
> md: Waiting for all devices to be available before autodetect
> md: If you don't use raid, use raid=noautodetect
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
> VFS: Mounted root (ext4 filesystem) readonly on device 259:6.
> devtmpfs: mounted
> Freeing unused kernel image (initmem) memory: 1188K
> Write protecting the kernel read-only data: 24576k
> Freeing unused kernel image (text/rodata gap) memory: 2032K
> Freeing unused kernel image (rodata/data gap) memory: 1908K
> Run /sbin/init as init process
>   with arguments:
>     /sbin/init
>   with environment:
>     HOME=/
>     TERM=linux
>     BOOT_IMAGE=/vmlinuz-5.10.61-gentoo
> kbd_mode (170) used greatest stack depth: 13808 bytes left
> init-early.sh (168) used greatest stack depth: 12928 bytes left
610a725
> usb 3-1: new high-speed USB device number 2 using xhci_hcd
619d733
< usbcore: registered new interface driver usb-storage
632,633c746
< urandom_read: 4 callbacks suppressed
< random: udevd: uninitialized urandom read (16 bytes read)
---
> sd 0:0:0:0: Attached scsi generic sg0 type 0
635,636d747
< random: udevd: uninitialized urandom read (16 bytes read)
< random: udevd: uninitialized urandom read (16 bytes read)
639a751
> EXT4-fs (nvme0n1p6): re-mounted. Opts: (null)
642,645c754,758
< random: fast init done
< ISO 9660 Extensions: Microsoft Joliet Level 3
< ISO 9660 Extensions: Microsoft Joliet Level 3
< ISO 9660 Extensions: RRIP_1991A
---
> random: ln: uninitialized urandom read (6 bytes read)
> EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
> random: mktemp: uninitialized urandom read (10 bytes read)
> ip (1217) used greatest stack depth: 12392 bytes left
> random: dd: uninitialized urandom read (512 bytes read)
647,744d759
< acpi_cpufreq: overriding BIOS provided _PSD data
< input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
< ACPI: Lid Switch [LID]
< input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
< ACPI: Power Button [PWRB]
< input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
< acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
< ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
< acpi device:08: registered as cooling_device8
< input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input4
< piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
< piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
< piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
< ACPI: Power Button [PWRF]
< ACPI: AC Adapter [ADP0] (on-line)
< ------------[ cut here ]------------
< WARNING: CPU: 6 PID: 8100 at drivers/i2c/busses/i2c-designware-common.c:468 i2c_dw_clk_rate+0x9/0x14 [i2c_designware_core]
< Modules linked in: snd_timer snd irqbypass wmi_bmof crct10dif_pclmul soundcore libarc4 i2c_piix4 i2c_designware_platform(+) i2c_designware_core ideapad_laptop(+) i2c_core sparse_keymap video wmi rfkill backlight pinctrl_amd battery button ac acpi_cpufreq efivarfs usb_storage crc32c_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci nvme xhci_hcd nvme_core
< CPU: 6 PID: 8100 Comm: systemd-udevd Not tainted 5.10.61-gentoo-x86_64 #1
< Hardware name: LENOVO 82C7/LNVNB161216, BIOS E8CN28WW 05/14/2021
< RIP: 0010:i2c_dw_clk_rate+0x9/0x14 [i2c_designware_core]
< Code: e8 35 2b 46 e1 48 8b 44 24 08 65 48 2b 04 25 28 00 00 00 74 05 e8 2b 7e 46 e1 48 83 c4 10 5b 5d c3 48 8b 47 68 48 85 c0 75 03 <0f> 0b c3 e8 5b 0f 68 e1 89 c0 c3 41 54 45 31 e4 53 48 8b 87 10 05
< RSP: 0018:ffffc9000129fc68 EFLAGS: 00010246
< RAX: 0000000000000000 RBX: ffff88810684d818 RCX: 0000000000000020
< RDX: ffffc9000129fc7c RSI: ffffc900000e50f4 RDI: ffff88810684d818
< RBP: ffff888100b80800 R08: ffff888100b80ab8 R09: ffff888108b70080
< R10: ffff888100b80ab8 R11: 000000000000000b R12: 000000000000012c
< R13: 000000000000012c R14: 0000000000000000 R15: 0000000000000000
< FS:  00007eff035d0340(0000) GS:ffff8881beb80000(0000) knlGS:0000000000000000
< CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
< CR2: 00007fbbb255e480 CR3: 0000000101cc0000 CR4: 00000000003506e0
< Call Trace:
<  i2c_dw_probe_master+0xe9/0x49d [i2c_designware_core]
<  dw_i2c_plat_probe+0x2d6/0x302 [i2c_designware_platform]
<  platform_drv_probe+0x2a/0x6b
<  really_probe+0x157/0x341
<  driver_probe_device+0x63/0x92
<  device_driver_attach+0x37/0x50
<  __driver_attach+0x92/0x9a
<  ? device_driver_attach+0x50/0x50
<  bus_for_each_dev+0x6e/0xa4
<  bus_add_driver+0x103/0x1b4
<  driver_register+0x99/0xd2
<  ? 0xffffffffa00d1000
<  do_one_initcall+0x79/0x17a
<  ? kmem_cache_alloc_trace+0x92/0xa1
<  do_init_module+0x56/0x1f3
<  __do_sys_finit_module+0x94/0xbb
<  do_syscall_64+0x5d/0x6a
<  entry_SYSCALL_64_after_hwframe+0x44/0xa9
< RIP: 0033:0x7eff03705f89
< Code: 48 8d 3d ca 4b 0c 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 0e 0c 00 f7 d8 64 89 01 48
< RSP: 002b:00007ffe20eee0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
< RAX: ffffffffffffffda RBX: 000055bb588714c0 RCX: 00007eff03705f89
< RDX: 0000000000000000 RSI: 00007eff03876b65 RDI: 000000000000000e
< RBP: 0000000000020000 R08: 0000000000000000 R09: 000055bb588aec00
< R10: 000000000000000e R11: 0000000000000246 R12: 00007eff03876b65
< R13: 0000000000000000 R14: 000055bb588aafe0 R15: 000055bb588714c0
< ---[ end trace 3f3d7bd794d869a0 ]---
< i2c_hid i2c-SYNA2B64:00: supply vdd not found, using dummy regulator
< i2c_hid i2c-SYNA2B64:00: supply vddl not found, using dummy regulator
< cfg80211: Loading compiled-in X.509 certificates for regulatory database
< snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
< snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
< kvm: Nested Virtualization enabled
< SVM: kvm: Nested Paging enabled
< SVM: Virtual VMLOAD VMSAVE supported
< SVM: Virtual GIF supported
< cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
< Loading firmware: regulatory.db
< Loading firmware: regulatory.db.p7s
< input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input5
< snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
< snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
< snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
< snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
< snd_hda_codec_realtek hdaudioC1D0:    inputs:
< snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
< snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
< battery: ACPI: Battery Slot [BAT0] (battery present)
< input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input6
< input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input7
< input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input8
< rtw_8822ce 0000:02:00.0: enabling device (0000 -> 0003)
< Loading firmware: rtw88/rtw8822c_fw.bin
< Loading firmware: rtw88/rtw8822c_wow_fw.bin
< rtw_8822ce 0000:02:00.0: Firmware version 9.9.10, H2C version 15
< rtw_8822ce 0000:02:00.0: Firmware version 9.9.4, H2C version 15
< rtw_8822ce 0000:02:00.0 wlp2s0: renamed from wlan0
< NET: Registered protocol family 10
< Segment Routing with IPv6
< 8021q: 802.1Q VLAN Support v1.8
< i2c_designware AMDI0010:00: controller timed out
< i2c_designware AMDI0010:00: timeout in disabling adapter
< hid (null): reading report descriptor failed
< i2c_hid i2c-SYNA2B64:00: can't add hid device: -5
< i2c_hid: probe of i2c-SYNA2B64:00 failed with error -5
< i2c_designware AMDI0010:00: timeout in disabling adapter
753a769
> sd 1:0:0:0: Attached scsi generic sg1 type 0