API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 16th, 2018
69
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.68 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.54 (johann@johann-nb) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7401+54-9009efa18b)) #0 Sun Jul 15 03:45:27 2018
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  4. [ 0.000000] MIPS: machine is Buffalo WHR-G300N V2
  5. [ 0.000000] SoC: Atheros AR7240 rev 2
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
  17. [ 0.000000] random: get_random_bytes called from 0x8044372c with crng_init=0
  18. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128
  19. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  20. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  23. [ 0.000000] Writing ErrCtl register=00039bd0
  24. [ 0.000000] Readback ErrCtl register=00039bd0
  25. [ 0.000000] Memory: 26632K/32768K available (3375K kernel code, 136K rwdata, 460K rodata, 1204K init, 203K bss, 6136K reserved, 0K cma-reserved)
  26. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  27. [ 0.000000] NR_IRQS: 51
  28. [ 0.000000] CPU clock: 440.000 MHz
  29. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 8687547485 ns
  30. [ 0.000012] sched_clock: 32 bits at 220MHz, resolution 4ns, wraps every 9761289213ns
  31. [ 0.007813] Calibrating delay loop... 292.45 BogoMIPS (lpj=1462272)
  32. [ 0.084083] pid_max: default: 32768 minimum: 301
  33. [ 0.088989] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  34. [ 0.095599] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  35. [ 0.107273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  36. [ 0.117148] futex hash table entries: 256 (order: -1, 3072 bytes)
  37. [ 0.123340] pinctrl core: initialized pinctrl subsystem
  38. [ 0.129785] NET: Registered protocol family 16
  39. [ 0.135157] Can't analyze schedule() prologue at 803a79f4
  40. [ 0.160884] clocksource: Switched to clocksource MIPS
  41. [ 0.167238] NET: Registered protocol family 2
  42. [ 0.172701] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.179679] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.186098] TCP: Hash tables configured (established 1024 bind 1024)
  45. [ 0.192647] UDP hash table entries: 256 (order: 0, 4096 bytes)
  46. [ 0.198505] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  47. [ 0.205166] NET: Registered protocol family 1
  48. [ 0.214047] Crashlog allocated RAM at address 0x1f00000
  49. [ 0.220535] workingset: timestamp_bits=30 max_order=13 bucket_order=0
  50. [ 0.233791] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  51. [ 0.239614] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  52. [ 0.258695] io scheduler noop registered
  53. [ 0.262672] io scheduler deadline registered (default)
  54. [ 0.268601] pinctrl-single 18040028.pinmux: 64 pins at pa b8040028 size 8
  55. [ 0.276622] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  56. [ 0.283911] console [ttyS0] disabled
  57. [ 0.287526] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 8, base_baud = 13750000) is a 16550A
  58. [ 0.296278] console [ttyS0] enabled
  59. [ 0.296278] console [ttyS0] enabled
  60. [ 0.303247] bootconsole [early0] disabled
  61. [ 0.303247] bootconsole [early0] disabled
  62. [ 0.317916] m25p80 spi0.0: mx25l3205d (4096 Kbytes)
  63. [ 0.322901] 3 fixed-partitions partitions found on MTD device spi0.0
  64. [ 0.329241] Creating 3 MTD partitions on "spi0.0":
  65. [ 0.334050] 0x000000000000-0x000000020000 : "u-boot"
  66. [ 0.340037] 0x000000020000-0x0000003f0000 : "firmware"
  67. [ 0.355186] 2 tplink-fw partitions found on MTD device firmware
  68. [ 0.361142] 0x000000020000-0x00000016c122 : "kernel"
  69. [ 0.367047] 0x00000016c124-0x0000003f0000 : "rootfs"
  70. [ 0.372973] mtd: device 3 (rootfs) set to be root filesystem
  71. [ 0.378655] 1 squashfs-split partitions found on MTD device rootfs
  72. [ 0.384891] 0x000000340000-0x0000003f0000 : "rootfs_data"
  73. [ 0.391295] 0x0000003f0000-0x000000400000 : "art"
  74. [ 0.397595] libphy: Fixed MDIO Bus: probed
  75. [ 0.402421] libphy: ag71xx_mdio: probed
  76. [ 0.406496] mdio-bus.0:1f: unsupported chip, ctrl=00000000
  77. [ 0.412051] ag71xx-switch: probe of mdio-bus.0:1f failed with error -22
  78. [ 0.751999] ag71xx 19000000.eth: Could not connect to PHY device
  79. [ 1.092639] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  80. [ 1.102447] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  81. [ 1.110508] NET: Registered protocol family 10
  82. [ 1.119326] Segment Routing with IPv6
  83. [ 1.123198] NET: Registered protocol family 17
  84. [ 1.127691] 8021q: 802.1Q VLAN Support v1.8
  85. [ 1.138948] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  86. [ 1.154839] Freeing unused kernel memory: 1204K
  87. [ 1.159358] This architecture does not have kernel memory protection.
  88. [ 2.550901] random: fast init done
  89. [ 3.612254] init: Console is alive
  90. [ 3.615891] init: - watchdog -
  91. [ 4.752166] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  92. [ 5.043812] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  93. [ 5.062123] init: - preinit -
  94. [ 7.259849] random: jshn: uninitialized urandom read (4 bytes read)
  95. [ 7.639665] random: jshn: uninitialized urandom read (4 bytes read)
  96. [ 7.703463] random: jshn: uninitialized urandom read (4 bytes read)
  97. [ 7.855746] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  98. Press the [f] key and hit [enter] to enter failsafe mode
  99. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  100. [ 8.892039] eth0: link up (1000Mbps/Full duplex)
  101. [ 8.896688] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  102. [ 11.420726] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  103. [ 11.455960] urandom-seed: Seed file not found (/etc/urandom.seed)
  104. [ 11.906683] procd: - early -
  105. [ 11.909674] procd: - watchdog -
  106. [ 12.201396] eth0: link down
  107. [ 12.746324] procd: - watchdog -
  108. [ 12.749771] procd: - ubus -
  109. [ 13.144636] urandom_read: 2 callbacks suppressed
  110. [ 13.144646] random: ubusd: uninitialized urandom read (4 bytes read)
  111. [ 13.156546] random: ubusd: uninitialized urandom read (4 bytes read)
  112. [ 13.163503] random: ubusd: uninitialized urandom read (4 bytes read)
  113. [ 13.171010] procd: - init -
  114. Please press Enter to activate this console.
  115. [ 14.064086] kmodloader: loading kernel modules from /etc/modules.d/*
  116. [ 14.075589] ip6_tables: (C) 2000-2006 Netfilter Core Team
  117. [ 14.093346] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  118. [ 14.101401] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  119. [ 14.111535] ip_tables: (C) 2000-2006 Netfilter Core Team
  120. [ 14.125928] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  121. [ 14.196968] xt_time: kernel timezone is -0000
  122. [ 14.263152] PPP generic driver version 2.4.2
  123. [ 14.270280] NET: Registered protocol family 24
  124. [ 14.316705] kmodloader: done loading kernel modules from /etc/modules.d/*
  125. [ 27.049021] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  126. [ 27.080965] jffs2_build_filesystem(): unlocking the mtd device...
  127. [ 27.080976] done.
  128. [ 27.089069] jffs2_build_filesystem(): erasing all blocks after the end marker...
  129. [ 32.321074] done.
  130. [ 32.330508] jffs2: notice: (800) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  131. [ 32.844957] overlayfs: upper fs does not support tmpfile.
  132. [ 34.544552] eth0: link up (1000Mbps/Full duplex)
  133. [ 34.550828] br-lan: port 1(eth0) entered blocking state
  134. [ 34.556140] br-lan: port 1(eth0) entered disabled state
  135. [ 34.561727] device eth0 entered promiscuous mode
  136. [ 34.608391] br-lan: port 1(eth0) entered blocking state
  137. [ 34.613680] br-lan: port 1(eth0) entered forwarding state
  138. [ 34.619293] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  139. [ 35.611008] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!