API tools faq
paste
angel12

Untitled

angel12
Aug 21st, 2011
99
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.23 KB | None | 0 0
raw download clone embed print report
  1. <6>Initializing cgroup subsys cpu
  2. <5>Linux version 2.6.32.9 (angel12@angel12-ubuntu) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.5-15ubuntu1) ) #1 Sun Aug 21 21:36:36 MDT 2011
  3. <4>CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
  4. <4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. <4>Machine: SMDKC110
  6. <4>Memory policy: ECC disabled, Data cache writeback
  7. <7>On node 0 totalpages: 20480
  8. <7>free_area_init_node: node 0, pgdat c0c9ff04, node_mem_map c0d92000
  9. <7> Normal zone: 160 pages used for memmap
  10. <7> Normal zone: 0 pages reserved
  11. <7> Normal zone: 20320 pages, LIFO batch:3
  12. <7>On node 1 totalpages: 65536
  13. <7>free_area_init_node: node 1, pgdat c0ca05bc, node_mem_map d0002000
  14. <7> Normal zone: 512 pages used for memmap
  15. <7> Normal zone: 0 pages reserved
  16. <7> Normal zone: 65024 pages, LIFO batch:15
  17. <7>On node 2 totalpages: 32768
  18. <7>free_area_init_node: node 2, pgdat c0ca0c74, node_mem_map e0001000
  19. <7> Normal zone: 256 pages used for memmap
  20. <7> Normal zone: 0 pages reserved
  21. <7> Normal zone: 32512 pages, LIFO batch:7
  22. <7>On node 3 totalpages: 0
  23. <7>free_area_init_node: node 3, pgdat c0ca132c, node_mem_map c0e3ac20
  24. <4> Normal zone: 1 pages exceeds realsize 0
  25. <4>CPU S5PV210/S5PC110 (id 0x43110222)
  26. <7>s5pv210_init_clocks: initializing clocks
  27. <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
  28. <3>copy: bad source 0
  29. <3>mout_audss: bad source 0
  30. <7>s5pv210_setup_clocks: registering clocks
  31. <7>s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00300400
  32. <7>s5pv210_setup_clocks: xtal is 24000000
  33. <6>S5PV210: PLL settings, A=800000000, M=667000000, E=96000000
  34. <6>s5pv210: 33554432 bytes system memory reserved for mfc at 0x30e45000
  35. <6>s5pv210: 33554432 bytes system memory reserved for mfc at 0x40204000
  36. <6>s5pv210: 14680064 bytes system memory reserved for fimc0 at 0x42204000
  37. <6>s5pv210: 1048576 bytes system memory reserved for fimc1 at 0x43004000
  38. <6>s5pv210: 12582912 bytes system memory reserved for fimc2 at 0x43104000
  39. <6>s5pv210: 6291456 bytes system memory reserved for pmem at 0x32e45000
  40. <6>s5pv210: 4194304 bytes system memory reserved for pmem_gpu1 at 0x33445000
  41. <6>s5pv210: 1536000 bytes system memory reserved for pmem_adsp at 0x33845000
  42. <6>s5pv210: 5132288 bytes system memory reserved for jpeg at 0x339bc000
  43. <6>s5pv210: 10485760 bytes system memory reserved for texstream at 0x33ea1000
  44. <6>s5pv210: 3145728 bytes system memory reserved for fimd at 0x43d04000
  45. <6>s5pv210: 262144 bytes system memory reserved for wifi at 0x348a1000
  46. <4>Built 3 zonelists in Zone order, mobility grouping on. Total pages: 117856
  47. <5>Kernel command line: androidboot.mode=unknown s3cfb_tl2796.lcd_type=2 console=ttySAC2,115200
  48. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  49. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  50. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  51. <6>Memory: 80MB 256MB 128MB = 464MB total
  52. <5>Memory: 333104KB available (10012K code, 987K data, 2484K init, 0K highmem)
  53. <6>SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=4
  54. <6>NR_IRQS:339
  55. <6>VIC @fd000000: id 0x00041192, vendor 0x41
  56. <6>VIC @fd010000: id 0x00041192, vendor 0x41
  57. <6>VIC @fd020000: id 0x00041192, vendor 0x41
  58. <6>VIC @fd030000: id 0x00041192, vendor 0x41
  59. <6>mult[140737]
  60. <6>max_delta_ns[2147483647]
  61. <6>min_delta_ns[30517]
  62. <6>rate[32768]
  63. <6>HZ[300]
  64. <4>Console: colour dummy device 80x30
  65. <6>console [ttySAC2] enabled
  66. <6>Calibrating delay loop... 794.88 BogoMIPS (lpj=1323008)
  67. <4>Mount-cache hash table entries: 512
  68. <6>Initializing cgroup subsys debug
  69. <6>Initializing cgroup subsys cpuacct
  70. <6>Initializing cgroup subsys freezer
  71. <6>Initializing cgroup subsys bfqio
  72. <6>CPU: Testing write buffer coherency: ok
  73. <0>KERNEL:kernel_sec_get_debug_level_from_boot=0x574f4c44
  74. <0>KERNEL:magic_number=0x0 DEBUG LEVEL low!!
  75. <0>(kernel_sec_set_upload_cause) : upload_cause set 0
  76. <6>
  77. <6> current proc : 0 swapper
  78. <6> -----------------------------------------------------------------------------------
  79. <6> pid uTime sTime exec(ns) stat cpu task_struct
  80. <6> -----------------------------------------------------------------------------------
  81. <6> 0 0 0 0 R (0) 0 c0c9e0a0 * swapper
  82. <4>[<c027e06c>] (unwind_backtrace+0x0/0xec) from [<c027b768>] (show_stack+0x20/0x24)
  83. <4>[<c027b768>] (show_stack+0x20/0x24) from [<c031bde4>] (dump_one_task_info+0xd4/0xd8)
  84. <4>[<c031bde4>] (dump_one_task_info+0xd4/0xd8) from [<c031be80>] (dump_all_task_info+0x98/0xf4)
  85. <4>[<c031be80>] (dump_all_task_info+0x98/0xf4) from [<c031bf28>] (kernel_sec_set_upload_cause+0x4c/0x54)
  86. <4>[<c031bf28>] (kernel_sec_set_upload_cause+0x4c/0x54) from [<c031bf98>] (kernel_sec_init+0x68/0x84)
  87. <4>[<c031bf98>] (kernel_sec_init+0x68/0x84) from [<c0008a24>] (start_kernel+0x2d8/0x2e4)
  88. <4>[<c0008a24>] (start_kernel+0x2d8/0x2e4) from [<30008034>] (0x30008034)
  89. <6> -----------------------------------------------------------------------------------
  90. <6>
  91. <6> cpu user:0 nice:0 system:0 idle:9 iowait:0 irq:0 softirq:0 0 0 0
  92. <6> -----------------------------------------------------------------------------------
  93. <6> cpu 0 user:0 nice:0 system:0 idle:9 iowait:0 irq:0 softirq:0 0 0 0
  94. <6> -----------------------------------------------------------------------------------
  95. <6>
  96. <6> irq : 28
  97. <6> -----------------------------------------------------------------------------------
  98. <6> irq-61 : 28
  99. <6> -----------------------------------------------------------------------------------
  100. <6>
  101. <6> softirq : 28
  102. <6> -----------------------------------------------------------------------------------
  103. <6> softirq-1 : 28
  104. <6> -----------------------------------------------------------------------------------
  105. <6>regulator: core version 0.5
  106. <6>NET: Registered protocol family 16
  107. <4>S5PC110 Hardware version : EVT1
  108. <4>HWREV is 0xa
  109. <4>setting GPIO_PHONE_RST_N as LOW
  110. <4>setting GPIO_PHONE_ON as LOW
  111. <4>S3C Power Management, Copyright 2004 Simtec Electronics
  112. <4>aries_init_wifi_mem
  113. <4>aries_init_wifi_mem success
  114. <4>dpram_access_init completed
  115. <4>Set DEFAULT INFORM6 !!!!!!
  116. <4>Read Defaulit INFORM 6 : 0xee00
  117. <6>S5PV210 Power Domain API Enable
  118. <6>S5PV210: Initializing architecture
  119. <6>S3C PL330-DMA Controller Driver, (c) 2008-2009 Samsung Electronics
  120. <6>Total 24 DMA channels will be initialized.
  121. <4>DMA: got clock for controller 0 and disabled
  122. <4>DMA: got clock for controller 1 and disabled
  123. <4>DMA: got clock for controller 2 and disabled
  124. <6>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  125. <6>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  126. <6>s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
  127. <6>s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
  128. <4>bio: create slab <bio-0> at 0
  129. <6>vgaarb: loaded
  130. <5>SCSI subsystem initialized
  131. <6>s3c-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
  132. <6>s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
  133. <6>s3c-i2c s3c2410-i2c.2: i2c-2: S3C I2C adapter
  134. <6>Bluetooth: Core ver 2.15
  135. <6>NET: Registered protocol family 31
  136. <6>Bluetooth: HCI device and connection manager initialized
  137. <6>Bluetooth: HCI socket layer initialized
  138. <6>Switching to clocksource clock_source_systimer
  139. <6>NET: Registered protocol family 2
  140. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  141. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  142. <6>TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
  143. <6>TCP: Hash tables configured (established 16384 bind 16384)
  144. <6>TCP reno registered
  145. <6>NET: Registered protocol family 1
  146. <7>[BT] rfkill_register(bt_rfk)
  147. <7>[BT] Device Powering ON
  148. <7>[BT] GPIO_BT_nRST = 0
  149. <4>[BT] GPIO_WLAN_BT_EN = 1
  150. <7>[BT] bt_host_wake_irq_handler start
  151. <4>[BT] GPIO_BT_nRST = 1
  152. <7>[BT] Device Powering OFF
  153. <7>[BT] bt_host_wake_irq_handler start
  154. <4>[BT] GPIO_BT_nRST = 0
  155. <4>[BT] GPIO_WLAN_BT_EN = 0
  156. <4>[BT] In the unblocked state of the sleep
  157. <7>[BT] GPIO_BT_WAKE = 0
  158. <4>[BT] wake_unlock(bt_wake_lock)
  159. <4>[BT] In the unblocked state of the sleep
  160. <7>[BT] GPIO_BT_WAKE = 0
  161. <4>[BT] wake_unlock(bt_wake_lock)
  162. <4>S5PC11X_FREQ_TAB=0 , S5PC11X_MAXFREQLEVEL=4
  163. <6>S5PV210 ADC driver, (c) 2010 Samsung Electronics
  164. <4>NetWinder Floating Point Emulator V0.97 (extended precision)
  165. <6>ashmem: initialized
  166. <6>ROMFS MTD (C) 2007 Red Hat, Inc.
  167. <6>msgmni has been set to 651
  168. <6>alg: No test for cipher_null (cipher_null-generic)
  169. <6>alg: No test for ecb(cipher_null) (ecb-cipher_null)
  170. <6>alg: No test for digest_null (digest_null-generic)
  171. <6>alg: No test for compress_null (compress_null-generic)
  172. <6>alg: No test for stdrng (krng)
  173. <6>alg: No test for ghash (ghash-generic)
  174. <6>io scheduler noop registered
  175. <6>io scheduler fifo registered
  176. <6>io scheduler bfq registered
  177. <6>io scheduler vr registered (default)
  178. <6>S3C MDNIE Driver, (c) 2010 Samsung Electronics
  179. <6>S3C IELCD Driver, (c) 2010 Samsung Electronics
  180. <6>s3cfb s3cfb: [fb0] dma: 0x43d04000, cpu: 0xe8c00000, size: 0x002ee000
  181. <6>FIMD src sclk = 166750000
  182. <6>s3cfb s3cfb: registered successfully
  183. <6>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  184. <6>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  185. <6>s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
  186. <6>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  187. <6>brd: module loaded
  188. <6>loop: module loaded
  189. <6>pmem: 1 init
  190. <6>pmem_gpu1: 1 init
  191. <6>pmem_adsp: 1 init
  192. <6>sec_jack_probe : Registering jack driver
  193. <6>input: sec_jack as /devices/virtual/input/input0
  194. <6>wake enabled for irq 38
  195. <4>[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
  196.  
  197. <4>[PAM: ] ++FSR_PAM_Init
  198.  
  199. <4>[PAM: ] OneNAND physical base address : 0xb0000000
  200.  
  201. <4>[PAM: ] OneNAND virtual base address : 0xe8880000
  202.  
  203. <4>[PAM: ] OneNAND nMID=0xec : nDID=0x50 Page size=4
  204.  
  205. <4>[PAM: ] --FSR_PAM_Init
  206.  
  207. <4>[BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
  208.  
  209. <4>[OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xc4c1de38, nFlag:0x00000000) / 1033 line
  210.  
  211. <4> pstOND4kCxt->nBaseAddr: 0xe8880000
  212.  
  213. <4> nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x0241
  214.  
  215. <4>[OND:INF] pstOND4kCxt->nSysConf1:0xf006 / 1116 line
  216.  
  217. <4>[OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1133 line
  218.  
  219. <4>[OND:INF] pstOND4kCxt->nIntID :0x0000 / 1236 line
  220.  
  221. <4>[OND:INF] 1X_CACHEPGM CMD : 0x007f
  222.  
  223. <4>[OND:INF] 1X_PLOAD CMD : 0x0003
  224.  
  225. <4>[BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
  226.  
  227. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  228.  
  229. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  230.  
  231. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  232.  
  233. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  234.  
  235. <4>[BBM:INF] a5a5 a5a5 ffff
  236.  
  237. <4>FSR: Registered TinyFSR Driver.
  238. <6>tl2796_probe::1143->s6e63m0 probed successfuly
  239. <6>PPP generic driver version 2.4.2
  240. <6>NET: Registered protocol family 24
  241. <6>PPPoL2TP kernel driver, V1.0
  242. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  243. <6>CSLIP: code copyright 1989 Regents of the University of California.
  244. <4>[otg_clock_enable] clk_enable(otg_clock) OK.
  245. <4>[otg_clock_enable] clk_disable(otg_clock) OK.
  246. <6>s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
  247. <6>s3c-udc : version 15 March 2009 (DMA Mode)
  248. <4>[ADB_UMS_ACM_RNDIS_MTP] string_dev = 1000be370e61
  249. <4>android_adb_ums_acm_rndis_mtp gadget: using random self ethernet address
  250. <4>android_adb_ums_acm_rndis_mtp gadget: using random host ethernet address
  251. <6>usb0: MAC e6:58:34:03:3e:1b
  252. <6>usb0: HOST MAC a6:a4:13:4c:0e:65
  253. <6>acm_function_add
  254. <4>[acm_bind] in =0xc0cd2720 , out =0xc0cd26e8
  255. <4>[acm_bind] int =0xc0cd2758
  256. <6>DUN is registerd
  257. <6>diag_function_add
  258. <4>[diag_bind] in =0xc0cd27c8 , out =0xc0cd2790
  259. <6>nmea_function_add
  260. <4>[nmea_bind] in =0xc0cd2870 , out =0xc0cd2838
  261. <6>fsg_function_bind cdrom patch after fsg->nluns 2
  262. <4>[fsg_function_bind] in =0xc0cd2918 , out =0xc0cd28a8
  263. <6>android_adb_ums_acm_rndis_mtp gadget: Number of LUNs=2
  264. <6>shaman: mass_storage_function_add success
  265. <6>adb_function_add
  266. <4>[create_bulk_endpoints]Specific Ep Alloc in =0xc0cd29c0 , out =0xc0cd2988
  267. <4>[mtpg_function_bind] line = [902]
  268. <4>[mtpg_function_bind] in =0xc0cd2950 , out =0xc0cd28e0
  269. <4>[mtpg_function_bind] Specific Ep Alloc int=0xc0cd2800
  270. <4>[mtpg_function_bind] dual speed line = [986]
  271. <4>***** [mtpg_function_bind:1004] calling mtp_function_enable with 0
  272. <4>[mtp_function_enable] mtp_function => (disabled)
  273. <4>****** mtp_function_enable and line 1419 null_desc
  274. <4>[rndis_bind] Skip EP Alloc at Booting
  275. <4> interface 0 = acm/c4cbd600
  276. <4> interface 1 = acm/c4cbd600
  277. <4> interface 2 = diag/c4e52000
  278. <4> interface 3 = nmea/c4e52100
  279. <4> interface 4 = usb_mass_storage/c4e50800
  280. <4> interface 5 = adb/c4e59900
  281. <4> interface 6 = Gadget_MTP/c4e59b00
  282. <4> interface 7 = rndis/dd46ff00
  283. <4> interface 8 = rndis/dd46ff00
  284. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2800
  285. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2988
  286. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd29c0
  287. <6>mass_storage_function_config_changed
  288. <4>[mass_storage_function_config_changed] Skip EP Realloc in =0xc0cd2918 , out =0xc0cd28a8
  289. <4> interface 0 = usb_mass_storage/c4e50800
  290. <6>android_adb_ums_acm_rndis_mtp gadget: Android Composite USB, version: Aug 21 2011
  291. <6>android_adb_ums_acm_rndis_mtp gadget: android_adb_ums_acm_rndis_mtp ready
  292. <6>Registered gadget driver 'android_adb_ums_acm_rndis_mtp'
  293. <4>[udc_enable]AP_USB_Power off by Bootup : 1
  294. <4>mice: could not register psaux device, error: -16
  295. <6>mice: PS/2 mouse device common for all mice
  296. <6>input: s3c-keypad as /devices/virtual/input/input1
  297. <7>s3c_keygpio_isr [1] key_status =64
  298. <4>s3c-keypad Initialized
  299. <6>S3C Keypad Driver
  300. <6>i2c /dev entries driver
  301. <6>i2c-gpio i2c-gpio.4: using pins 250 (SDA) and 249 (SCL)
  302. <6>i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
  303. <6>regulator: DCDC1: 750 <--> 1500 mV
  304. <6>regulator: DCDC2: 750 <--> 1500 mV
  305. <6>regulator: LDO7: 1600 <--> 3600 mV
  306. <6>regulator: LDO17: 1600 <--> 3600 mV
  307. <6>i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
  308. <3>fsa:fsa9480_codec_probe:[FSA9480] fsa9480_codec_probe
  309. <6>input: dock as /devices/virtual/input/input2
  310. <3>fsa:fsa9480_interrupt:fsa9480_interrupt
  311. <3>fsa:FSA9480_ReadIntRegister:[FSA9480] FSA9480_ReadIntRegister
  312. <6>i2c-gpio i2c-gpio.7: using pins 202 (SDA) and 201 (SCL)
  313. <6>i2c-gpio i2c-gpio.9: using pins 199 (SDA) and 198 (SCL)
  314. <6>i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
  315. <6>i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL)
  316. <6>i2c-gpio i2c-gpio.13: using pins 229 (SDA) and 224 (SCL)
  317. <6>i2c-gpio i2c-gpio.14: using pins 25 (SDA) and 23 (SCL)
  318. <6>Linux video capture interface: v2.00
  319. <6>IPC probe success
  320. <6>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  321. <6>
  322. <6>S3C JPEG Driver, (c) 2007 Samsung Electronics
  323. <4>JPEG driver for S5PV210
  324. <6>i2c i2c-1: attached s5p_ddc into i2c adapter successfully
  325. <4>S5PC11X HPD Driver, (c) 2009 Samsung Electronics
  326. <4>S5PC11X CEC Driver, (c) 2009 Samsung Electronics
  327. <6>s5p-g2d s5p-g2d: g2d driver loaded successfully
  328. <6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
  329. <6>device-mapper: multipath: version 1.1.0 loaded
  330. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  331. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  332. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  333. <6>Bluetooth: Virtual HCI driver ver 1.3
  334. <6>Bluetooth: HCI UART driver ver 2.2
  335. <6>Bluetooth: HCI H4 protocol initialized
  336. <6>Bluetooth: HCI BCSP protocol initialized
  337. <6>Bluetooth: HCILL protocol initialized
  338. <6>Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  339. <6>cpuidle: using governor ladder
  340. <6>cpuidle: using governor menu
  341. <6>sdhci: Secure Digital Host Controller Interface driver
  342. <6>sdhci: Copyright(c) Pierre Ossman
  343. <6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
  344. <6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  345. <6>s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
  346. <6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  347. <6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  348. <4> Universal :SD Detect configuration
  349. <7> Universal : Card status 0
  350. <6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  351. <3>wacom driver registered
  352. <4>GP2A opt i2c attach success!!!
  353. <4>opt_i2c_client : (0xc4e86300)
  354. <4>gp2a_opt_probe is OK!!
  355. <4>yamaha_init
  356. <6>l3g4200d_probe : i2c_check_functionality I2C_FUNC_I2C!!
  357. <6>l3g4200d_probe : i2c_check_functionality I2C_FUNC_SMBUS_I2C_BLOCK!!
  358. <6>l3g4200d_probe : validate_pdata!!
  359. <6>l3g4200d_probe : L3G4200D Device detected!
  360. <6>l3g4200d_probe : L3G4200D device created and probe completed successfully
  361. <4>level device init
  362. <6>Advanced Linux Sound Architecture Driver Version 1.0.21.
  363. <4>No device for DAI WM8994 PAIFRX
  364. <4>[ wm8994.c (wm8994_probe,2367) ] wm8994_probe
  365. <3>fsa:FSA9480_ProcessDevice:(dev1 : 0x0, dev2 : 0x0)
  366. <3>fsa:line_path_ctl:HWREV : 0xa
  367. <4>[ wm8994_aries.c (audio_power,356) ] AUDIO POWER COMPLETED : 1
  368. <6>[A1026]A1026_i2c_drv_init
  369. <6>[A1026]a1026_i2c_probe
  370. <6>[A1026]A1026_probe
  371. <6>[A1026]A1026_dev_init
  372. <6>[A1026]A1026_dev_powerup
  373. <7>*** DEBUG : First we search for SDIO...(0)***
  374. <7>*** DEBUG : ...then normal SD...(0) ***
  375. <7>*** DEBUG : ...and finally MMC. (0)***
  376. <6>[A1026]A1026 Download Start
  377. <6>[A1026]A1026 slave addr = 0x7c
  378. <6>[A1026]i2c_master_send ret = [2]
  379. <6>[A1026]bootinit command after read reg = 0x1
  380. <3>fsa:fsa9480_interrupt:fsa9480_interrupt
  381. <3>fsa:FSA9480_ReadIntRegister:[FSA9480] FSA9480_ReadIntRegister
  382. <6>[A1026]A1026 SYNC 0x80 0x0 0x0 0x0, count = 0
  383. <4>mmc0: switch to bus width 4
  384. <6>mmc0: new high speed MMC card at address 0001
  385. <6>mmcblk0: mmc0:0001 SEM02G 1.82 GiB
  386. <6> mmcblk0: p1 p2 p3
  387. <6>[A1026]A1026 Download End
  388. <7>Another host want the wakelock : 2
  389. <6>ldo38_control : turn ON LDO3 and LDO8 (cur_stat=0, req=1)
  390. <4>[otg_clock_enable] clk_enable(otg_clock) OK.
  391. <4>[udc_enable]AP_USB_Power off by Bootup : 1
  392. <3>fsa:FSA9480_ProcessDevice:(dev1 : 0x4, dev2 : 0x0)
  393. <3>fsa:FSA9480_ProcessDevice:FSA9480_DEV_TY1_USB --- ATTACH
  394. <3>fsa:UsbIndicator:state(1), indicator_dev->state(0)
  395. <3>fsa:print_switch_state:usb path is not AP
  396. <3>fsa:line_path_ctl:HWREV : 0xa
  397. <3>fsa:_path_ctl_usb:usb 0
  398. <4>[FSA9480_Enable_CP_USB] Enable CP USB
  399. <6>[A1026]A1026Sleep
  400. <7>*** DEBUG : First we search for SDIO...(1)***
  401. <7>*** DEBUG : ...then normal SD...(1) ***
  402. <7>*** DEBUG : ...and finally MMC. (1)***
  403. <7>Another host want the wakelock : 1
  404. <7> Universal : Card status 0
  405. <7>*** DEBUG : First we search for SDIO...(2)***
  406. <7>*** DEBUG : ...then normal SD...(2) ***
  407. <6>mmc2: new high speed SDHC card at address 0001
  408. <6>mmcblk1: mmc2:0001 00000 14.7 GiB
  409. <6> mmcblk1: p1
  410. <7>mmc2: wake_lock_timeout 1sec 0
  411. <6>[A1026]A1026Sleep 0x80 0x10 0x0 0x1
  412. <6>[A1026]A1026Sleep ret=0
  413. <4>[ wm8994.c (wm8994_i2c_probe,2283) ]
  414. <4>[ wm8994.c (wm8994_init,2099) ]
  415. <4>s3c_preallocate_dma_buffer: VA-ff001000, PA-34EE0000, 131072bytes
  416. <4>s3c_preallocate_dma_buffer: VA-ff021000, PA-34D00000, 131072bytes
  417. <6>asoc: WM8994 PAIFRX <-> s3c64xx-i2s mapping ok
  418. <6>sound_tty procfs initialised
  419. <6>sound_tty procfs initialised
  420. <4>Voodoo sound: initializing driver v10
  421. <6>ALSA device list:
  422. <6> #0: smdkc110 (WM8994)
  423. <4>Netfilter messages via NETLINK v0.30.
  424. <4>nf_conntrack version 0.5.0 (5211 buckets, 20844 max)
  425. <4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  426. <4>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  427. <4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  428. <6>xt_time: kernel timezone is -0000
  429. <6>IPv4 over IPv4 tunneling driver
  430. <6>GRE over IPv4 tunneling driver
  431. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  432. <6>TCP cubic registered
  433. <6>NET: Registered protocol family 10
  434. <6>IPv6 over IPv4 tunneling driver
  435. <6>NET: Registered protocol family 17
  436. <6>NET: Registered protocol family 15
  437. <5>Bridge firewalling registered
  438. <6>Bluetooth: L2CAP ver 2.14
  439. <6>Bluetooth: L2CAP socket layer initialized
  440. <6>Bluetooth: SCO (Voice Link) ver 0.6
  441. <6>Bluetooth: SCO socket layer initialized
  442. <6>Bluetooth: RFCOMM TTY layer initialized
  443. <6>Bluetooth: RFCOMM socket layer initialized
  444. <6>Bluetooth: RFCOMM ver 1.11
  445. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  446. <6>Bluetooth: BNEP filters: protocol multicast
  447. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  448. <6>NET: Registered protocol family 33
  449. <6>NET: Registered protocol family 35
  450. <4>S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  451. <6>using rtc device, s3c, for alarms
  452. <6>s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
  453. <6>ThumbEE CPU extension supported.
  454. <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  455. <7>qt602240 GPIO Status
  456. <7>TOUCH_EN : High
  457. <7>TOUCH_RST : Low
  458. <7>TOUCH_INT : High
  459. <4>qt602240_i2c is attached..
  460. <4>+-----------------------------------------+
  461. <7>| Quantum Touch Driver Probe! |
  462. <4>+-----------------------------------------+
  463. <6>input: qt602240_ts_input as /devices/virtual/input/input3
  464. <4>QT_reprogram check
  465. <4>[QT] init_touch_driver start
  466. <4>[QT] init_I2C start
  467. <4>
  468. <4>[TSP] Touch device found
  469. <4>Version: 0x16
  470. <4>
  471. Family: 0x80
  472. <4>
  473. Variant: 0x1
  474. <4>
  475. Build number: 0xab
  476. <4>
  477. Matrix X size : 19
  478. <4>
  479. Matrix Y size : 11
  480. <4>
  481. Calculated CRC: 0x1c 0x34 0xff 0x00
  482. <4>
  483.  
  484. <4>
  485. Stored CRC: 0x1c 0x34 0xff 0x00
  486. <4>
  487.  
  488. <4>
  489. Info block CRC value OK.
  490. <4>
  491. <4>
  492.  
  493. <4>[TSP]qt_Power_Config_Init real board
  494. <4>
  495. <4>[TSP][reset_chip]
  496. <4>Chip reset OK!
  497. <4>
  498.  
  499. <4>[TSP] current reference : 9887
  500. <7>qt602240_probe: TA is connected -> update TSP register
  501. <4>[TSP] TA Detect!!!
  502. <4>[TSP] qt602240_probe: Start touchscreen qt602240_ts_input
  503. <4>qt602240_probe , 3531
  504. <4>[QT] ret : 0, qt602240->client name : qt602240_ts
  505. <4>[QT] qt602240_init/5626
  506. <4>[QT] qt602240_init/5651, platform_driver_register!!
  507. <7>[TSP] msg id = 1 90 85 1d 92 0 0 0 0
  508. <4> [TSP] quantum_msg[0] = 1 and quantum_msg[1] = 0x10 cal_check_flag=1
  509. <7>[TSP] msg id = 1 0 85 1d 92 0 0 0 0
  510. <4> [TSP] quantum_msg[0] = 1 and quantum_msg[1] = 0x00 cal_check_flag=2
  511. <6>s3c2410-rtc s3c2410-rtc: setting system clock to 2005-01-01 00:05:00 UTC (1104537900)
  512. <6>FIMC0 registered successfully
  513. <6>FIMC1 registered successfully
  514. <6>FIMC2 registered successfully
  515. <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
  516. <6>ldo38_control : turn ON LDO3 and LDO8 (cur_stat=1, req=2)
  517. <4>s5p_tv_probe: LDO3_8 is enabled by TV
  518. <3>failed to find clock "mout_vpll_src"
  519. <6>s5p-tvout s5p-tvout: hpd status is cable removed
  520. <6>ldo38_control : turn OFF LDO3 and LDO8 (cur_stat=3, req=2)
  521. <4>s5p_tv_probe: LDO3_8 is disabled by TV
  522. <4>Fuel guage attach success!!!
  523. <4>maxim_chg_status: maxim_USB_connect~~~
  524. <4>maxim_chg_status: maxim_USB_connect~~~
  525. <6>maxim_charging_control: USB charging enable
  526. <4>s3c_cable_check_status: status : USB
  527. <4>s3c_cable_status_update: cable USB
  528. <4>s3c_cable_status_update: call power_supply_changed
  529. <4>pmic interrupt registered
  530. <6>Freeing init memory: 2484K
  531. <4>Warning: unable to open an initial console.
  532. <3>init: /init.rc: 18: invalid command 'mknod'
  533. <3>init: /init.rc: 18: invalid command 'mknod'
  534. <3>init: /init.rc: 18: invalid command 'mknod'
  535. <3>init: /init.rc: 18: invalid command 'mknod'
  536. <3>init: /init.rc: 21: invalid command 'mknod'
  537. <3>init: /init.rc: 290: invalid command 'dhcpcd'
  538. <4>!@Init process: device_init #3
  539. <3>init: [disk_config] initialize_mbr_flash for S1_EUR
  540. <3>init: [disk_config] [Disk Size (1958739968), (1912832k), sector_size 512 :: num_lba 3825664 ]
  541. <3>init: [disk_config] calc_pte_of_disk -> start 64 num lba 2453440 next : 2453504
  542. <3>init: [disk_config] calc_pte_of_disk -> start 2453504 num lba 839680 next : 3293184
  543. <3>init: [disk_config] calc_pte_of_disk -> start 3293184 num lba 532480 next : 3825664
  544. <3>init: [disk_config] compare_partition -> num_part 0 , offset (446)(0x1be)
  545. <3>init: [disk_config] [ target -> Disk0 : 1256161280 (1226720k) 00:83:00000040:00256fc0 ]
  546. <3>init: [disk_config] Match partition table entry ... skip(0)
  547. <3>init: [disk_config] compare_partition -> num_part 1 , offset (462)(0x1ce)
  548. <3>init: [disk_config] [ target -> Disk1 : 429916160 (419840k) 00:83:00257000:000cd000 ]
  549. <3>init: [disk_config] Match partition table entry ... skip(1)
  550. <3>init: [disk_config] compare_partition -> num_part 2 , offset (478)(0x1de)
  551. <3>init: [disk_config] [ target -> Disk2 : 272629760 (266240k) 00:83:00324000:00082000 ]
  552. <3>init: [disk_config] Match partition table entry ... skip(2)
  553. <3>init: [disk_config] compare_partition -> num_part 3 , offset (494)(0x1ee)
  554. <3>init: [disk_config] [ target -> Disk3 : 0 (0k) 00:00:00000000:00000000 ]
  555. <3>init: [disk_config] Match partition table entry ... skip(3)
  556. <3>init: [disk_config] bNeedRoot : 0x00
  557. <3>init: cannot open '/initlogo.rle'
  558. <6>init: command 'loglevel' r=0
  559. <6>init: command 'export' r=0
  560. <6>init: command 'export' r=0
  561. <6>init: command 'export' r=0
  562. <6>init: command 'export' r=0
  563. <6>init: command 'export' r=0
  564. <6>init: command 'export' r=0
  565. <6>init: command 'export' r=0
  566. <6>init: command 'export' r=0
  567. <6>init: command 'export' r=0
  568. <6>init: command 'export' r=0
  569. <6>init: command 'export' r=0
  570. <6>init: command 'export' r=0
  571. <6>init: command 'export' r=0
  572. <6>init: command 'export' r=0
  573. <6>init: command 'symlink' r=0
  574. <6>init: command 'symlink' r=0
  575. <6>init: command 'setprop' r=0
  576. <6>init: command 'mkdir' r=-17
  577. <4>fsr: module license 'Samsung Proprietary' taints kernel.
  578. <4>Disabling lock debugging due to kernel taint
  579. <4>[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
  580.  
  581. <4>[PAM: ] ++FSR_PAM_Init
  582.  
  583. <4>[PAM: ] OneNAND physical base address : 0xb0000000
  584.  
  585. <4>[PAM: ] OneNAND virtual base address : 0xe8940000
  586.  
  587. <4>[PAM: ] OneNAND Controller DMA physical base address : 0xb0600000
  588.  
  589. <4>[PAM: ] OneNAND Controller DMA virtual base address : 0xe8980000
  590.  
  591. <4>[PAM: ] OneNAND nMID=0xec : nDID=0x50 Page size=4
  592.  
  593. <4>[PAM: ] --FSR_PAM_Init
  594.  
  595. <4>[BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
  596.  
  597. <4>[OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xc4c1ddf0, nFlag:0x00000000) / 1033 line
  598.  
  599. <4> pstOND4kCxt->nBaseAddr: 0xe8940000
  600.  
  601. <4> nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x0241
  602.  
  603. <4>[OND:INF] pstOND4kCxt->nSysConf1:0xf006 / 1116 line
  604.  
  605. <4>[OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1133 line
  606.  
  607. <4>[OND:INF] pstOND4kCxt->nIntID :0x0000 / 1236 line
  608.  
  609. <4>[OND:INF] 1X_CACHEPGM CMD : 0x007f
  610.  
  611. <4>[OND:INF] 1X_PLOAD CMD : 0x0003
  612.  
  613. <4>[BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
  614.  
  615. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  616.  
  617. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  618.  
  619. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  620.  
  621. <4>[BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
  622.  
  623. <4>[BBM:INF] a5a5 a5a5 ffff
  624.  
  625. <4>[BBM: ] << DevNO:0, DieNO: 0 MAPPING INFORMATION >>
  626.  
  627. <4>[BBM: ] Bad Mark Information
  628.  
  629. <4>[BBM: ] - Bad Mark (0x2222) by erase error
  630.  
  631. <4>[BBM: ] - Bad Mark (0x4444) by write error
  632.  
  633. <4>[BBM: ] << Total : 0 BAD-MAPPING INFORMATION >>
  634.  
  635. <4>[BIF: ] nPartition Information (nVol : 0)
  636.  
  637. <4> nVer : 0x10000
  638.  
  639. <4> 00 / nID:0x00 / nAttr:0x00001002 / 1stVun: 0 / Units: 1
  640.  
  641. <4> 01 / nID:0x01 / nAttr:0x00001002 / 1stVun: 1 / Units: 1
  642.  
  643. <4> 02 / nID:0x20 / nAttr:0x00001101 / 1stVun: 2 / Units: 40
  644.  
  645. <4> 03 / nID:0x13 / nAttr:0x00001001 / 1stVun: 42 / Units: 12
  646.  
  647. <4> 04 / nID:0x03 / nAttr:0x00001002 / 1stVun: 54 / Units: 5
  648.  
  649. <4> 05 / nID:0x04 / nAttr:0x00001002 / 1stVun: 59 / Units: 5
  650.  
  651. <4> 06 / nID:0x21 / nAttr:0x00001101 / 1stVun: 64 / Units: 20
  652.  
  653. <4> 07 / nID:0x06 / nAttr:0x00001002 / 1stVun: 84 / Units: 30
  654.  
  655. <4> 08 / nID:0x07 / nAttr:0x00001002 / 1stVun: 114 / Units: 30
  656.  
  657. <4> 09 / nID:0x22 / nAttr:0x00001101 / 1stVun: 144 / Units: 1380
  658.  
  659. <4> 10 / nID:0x23 / nAttr:0x00001101 / 1stVun: 1524 / Units: 430
  660.  
  661. <4> 11 / nID:0x11 / nAttr:0x00001002 / 1stVun: 1954 / Units: 48
  662.  
  663. <4> 12 / nID:0x12 / nAttr:0x00001002 / 1stVun: 2002 / Units: 2
  664.  
  665. <4>[BBM:INF] The registered blocks in ERL are handled
  666.  
  667. <4>[BBM:INF] (number of blocks: 0)
  668.  
  669. <4>BML: Registered BML Driver.
  670. <6>init: command 'insmod' r=0
  671. <4>[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
  672.  
  673. <4>[BIF: ] FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1030 line
  674.  
  675. <4>FSR: Registered STL Driver.
  676. <6>init: command 'insmod' r=0
  677. <6>init: command 'insmod' r=0
  678. <6>init: command 'insmod' r=0
  679. <6>init: command 'insmod' r=0
  680. <4>Storage device init
  681. <6>init: command 'insmod' r=0
  682. <6>init: command 'insmod' r=-1
  683. <4>[VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  684. <6>init: command 'insmod' r=0
  685. <4>######## bthid_init: ########
  686. <4>######## bthid_init: done ########
  687. <6>init: command 'insmod' r=0
  688. <6>param_init
  689. <3>lfs_param_op: filp_open failed. (-2)
  690. <3>param_init(304): Loading parameters failed. Parameters have been initialized as default.
  691. <6>init: command 'insmod' r=0
  692. <3>ltespi_init: Vish
  693. <6>init: command 'insmod' r=0
  694. <4>[onedram_init] Entered1
  695. <4>[onedram] probe complete!
  696. <6>init: command 'insmod' r=0
  697. <6>init: command 'insmod' r=0
  698. <6>modemctl modemctl: [modemctl_probe]
  699. <6>modemctl lte: PHONE ACTIVE: 0
  700. <6>init: command 'insmod' r=0
  701. <3>fsa:_get_switch_sel:param switch sel 0x1
  702. <3>fsa:param_load_path:usb_path(1),uart_path(0),uart_debug_enable(0)
  703. <4>[USB] enable_adb - enable(0x02), prev_status(0x00)
  704. <4>Here is enable_adb@@@@
  705. <4>[enable_adb]USBSTATUS_MTPONLY
  706. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2800
  707. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2988
  708. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd29c0
  709. <6>mtp_function_config_changed
  710. <4>[mtp_function_config_changed] Skip EP Realloc in =0xc0cd2950 , out =0xc0cd28e0
  711. <4>[usb_specific_ep_realloc] ep int =0xc0cd2800
  712. <4>[mtp_function_config_changed] Specific EP Realloc int =0xc0cd2800
  713. <4> interface 0 = Gadget_MTP/c4e59b00
  714. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  715. <3>fsa:_s2b:to bit -6
  716. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  717. <3>fsa:_get_switch_sel:param switch sel 0x1
  718. <3>fsa:param_load_path:usb_path(1),uart_path(0),uart_debug_enable(0)
  719. <3>fsa:UsbMenuSelStore:fsa UsbMenuSelStore SWITCH_SEL Store arg(0) sel= 0x11 usb_func(4)
  720. <3>fsa:param_save_path:uart(0)usb(1)usb(4),uart_debug(0)
  721. <6>inside set_param_value1 idx = 4, value = -993886508
  722. <3>lfs_param_op: filp_open failed. (-2)
  723. <3>fsa:_set_switch_sel:param switch sel 0x11
  724. <3>fsa:line_path_ctl:HWREV : 0xa
  725. <3>fsa:_path_ctl_usb:usb 1
  726. <4>[FSA9480_Enable_AP_USB] Enable AP USB
  727. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  728. <3>fsa:param_save_path:uart(0)usb(1)usb(4),uart_debug(0)
  729. <6>inside set_param_value1 idx = 4, value = -993886468
  730. <3>lfs_param_op: filp_open failed. (-2)
  731. <3>fsa:_set_switch_sel:param switch sel 0x11
  732. <3>fsa:line_path_ctl:HWREV : 0xa
  733. <3>fsa:_path_ctl_usb:usb 1
  734. <4>[FSA9480_Enable_AP_USB] Enable AP USB
  735. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  736. <3>[DPRAM] *** Entering dpram_probe()
  737. <3>[DPRAM] *** Leaving dpram_probe()
  738. <6>init: command 'insmod' r=0
  739. <7>NV nv_init() nv device init
  740. <6>init: command 'insmod' r=0
  741. <6>init: command 'insmod' r=-1
  742. <6>init: command 'insmod' r=-1
  743. <6>init: command 'mkdir' r=0
  744. <6>init: command 'mkdir' r=0
  745. <6>init: command 'mkdir' r=0
  746. <6>init: command 'mount' r=0
  747. <6>init: command 'mkdir' r=0
  748. <6>init: command 'symlink' r=0
  749. <6>init: command 'mkdir' r=0
  750. <6>init: command 'mount' r=0
  751. <6>init: command 'mkdir' r=-17
  752. <6>init: command 'mkdir' r=0
  753. <6>init: command 'mkdir' r=0
  754. <6>init: command 'mkdir' r=0
  755. <6>init: command 'mkdir' r=0
  756. <6>init: command 'mkdir' r=0
  757. <6>init: command 'mkdir' r=0
  758. <6>init: command 'mkdir' r=0
  759. <6>init: command 'mount' r=0
  760. <6>init: command 'mkdir' r=0
  761. <6>init: command 'mount' r=0
  762. <6>init: command 'write' r=0
  763. <6>init: command 'write' r=0
  764. <6>init: command 'write' r=0
  765. <6>init: command 'write' r=0
  766. <6>init: command 'write' r=0
  767. <6>init: command 'write' r=0
  768. <6>init: command 'write' r=0
  769. <6>init: command 'mkdir' r=0
  770. <6>init: command 'mount' r=0
  771. <6>init: command 'chown' r=0
  772. <6>init: command 'chown' r=0
  773. <6>init: command 'chmod' r=0
  774. <6>init: command 'write' r=-22
  775. <6>init: command 'mkdir' r=0
  776. <6>init: command 'chown' r=0
  777. <6>init: command 'chmod' r=0
  778. <6>init: command 'write' r=0
  779. <6>init: command 'mkdir' r=0
  780. <6>init: command 'chown' r=0
  781. <6>init: command 'chmod' r=0
  782. <6>init: command 'write' r=0
  783. <6>init: command 'chmod' r=0
  784. <6>init: command 'chmod' r=-2
  785. <6>init: command 'chmod' r=0
  786. <6>init: command 'chmod' r=0
  787. <6>init: command 'chmod' r=-2
  788. <6>init: command 'chmod' r=-2
  789. <6>init: command 'chmod' r=0
  790. <4>[BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
  791.  
  792. <4>[BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1174 line
  793.  
  794. <4>[SIF:INF] ===> STL Clst[ 2] Scan Root Info
  795.  
  796. <4>[SIF:INF] ===> STL Zone[ 2, 0] Open Zone Meta
  797.  
  798. <4>[SIF:INF] Latest Header Index ( 14) Vbn ( 16)
  799.  
  800. <4>[SIF:INF] Latest Header Clean Page Offset ( 31)
  801.  
  802. <4>[SIF:INF] POR write timer : 0x1d
  803.  
  804. <4>[SIF:INF] Latest Context BlockIdx ( 14) Offset ( 30) Vpn ( 1054)
  805.  
  806. <4>[SIF:INF] Number of Free Block ( 15)
  807.  
  808. <4>[SIF:INF] Active Log List : Num ( 8)
  809.  
  810. <4>[SIF:INF] ===> STL Zone[ 2, 0] Open Zone Post
  811.  
  812. <4>[SIF:INF] ===> STL Zone[ 2, 0] Validity check
  813.  
  814. <4>[SIF:INF] Partition [0, 22] open is success
  815.  
  816. <4>[SIF:INF] Zone[ 2, 0]: nDgn( 7) nVbn( 1129) S( 54)-E( 54) nCPOffs( 55)
  817.  
  818. <6>init: command 'mount' r=0
  819. <4>[BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
  820.  
  821. <4>[BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1174 line
  822.  
  823. <4>[BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
  824.  
  825. <6>init: command 'mount' r=-1
  826. <6>init: command 'mount' r=0
  827. <6>init: command 'mount' r=-1
  828. <6>init: command 'chown' r=0
  829. <6>init: command 'chmod' r=0
  830. <6>init: command 'mkdir' r=-17
  831. <6>init: command 'chown' r=0
  832. <6>init: command 'chmod' r=0
  833. <6>init: command 'copy' r=-1
  834. <6>init: command 'chown' r=-2
  835. <6>init: command 'chmod' r=-2
  836. <6>init: command 'copy' r=-1
  837. <6>init: command 'chown' r=-2
  838. <6>init: command 'chmod' r=-2
  839. <6>init: command 'write' r=-2
  840. <6>init: command 'mount' r=-1
  841. <6>init: command 'mount' r=-1
  842. <6>init: command 'chown' r=-2
  843. <6>init: command 'chmod' r=-2
  844. <6>init: command 'chmod' r=-2
  845. <6>init: command 'mount' r=0
  846. <6>init: command 'mount' r=-1
  847. <6>init: command 'chown' r=0
  848. <6>init: command 'chmod' r=0
  849. <6>init: command 'mkdir' r=-30
  850. <6>init: command 'mount' r=-1
  851. <6>init: command 'mkdir' r=-17
  852. <6>init: command 'mkdir' r=-30
  853. <6>init: command 'mount' r=-1
  854. <6>init: command 'chown' r=0
  855. <6>init: command 'chmod' r=0
  856. <6>init: command 'chown' r=0
  857. <6>init: command 'chmod' r=0
  858. <6>init: command 'chown' r=0
  859. <6>init: command 'chmod' r=0
  860. <6>init: command 'chown' r=-2
  861. <6>init: command 'chmod' r=-2
  862. <6>init: command 'mkdir' r=-17
  863. <6>init: command 'chown' r=0
  864. <6>init: command 'chmod' r=0
  865. <6>init: command 'chmod' r=-2
  866. <6>init: command 'mkdir' r=-17
  867. <6>init: command 'mkdir' r=-17
  868. <6>init: command 'mkdir' r=-17
  869. <6>init: command 'mkdir' r=-17
  870. <6>init: command 'mkdir' r=-17
  871. <6>init: command 'mkdir' r=-17
  872. <6>init: command 'mkdir' r=-17
  873. <6>init: command 'mkdir' r=-17
  874. <6>init: command 'mkdir' r=-17
  875. <6>init: command 'mkdir' r=-17
  876. <6>init: command 'chown' r=0
  877. <6>init: command 'chmod' r=0
  878. <6>init: command 'mkdir' r=-17
  879. <6>init: command 'chown' r=0
  880. <6>init: command 'chmod' r=0
  881. <6>init: command 'mkdir' r=-17
  882. <6>init: command 'chown' r=0
  883. <6>init: command 'chmod' r=0
  884. <6>init: command 'mkdir' r=-17
  885. <6>init: command 'mkdir' r=-17
  886. <6>init: command 'chown' r=0
  887. <6>init: command 'chmod' r=0
  888. <6>init: command 'chmod' r=-30
  889. <6>init: command 'mkdir' r=-17
  890. <6>init: command 'mkdir' r=-17
  891. <6>init: command 'mkdir' r=-17
  892. <6>init: command 'mkdir' r=-17
  893. <6>init: command 'mkdir' r=-17
  894. <6>init: command 'mkdir' r=-17
  895. <6>init: command 'chmod' r=0
  896. <6>init: command 'chmod' r=0
  897. <6>init: command 'chmod' r=0
  898. <6>init: command 'chmod' r=0
  899. <6>init: command 'chmod' r=0
  900. <6>init: command 'chmod' r=0
  901. <6>init: command 'mkdir' r=-17
  902. <6>init: command 'chmod' r=0
  903. <6>init: command 'chmod' r=0
  904. <6>init: command 'chmod' r=-2
  905. <6>init: command 'chmod' r=-2
  906. <6>init: command 'chmod' r=-2
  907. <6>init: command 'chmod' r=-2
  908. <6>init: command 'mkdir' r=-17
  909. <6>init: command 'chmod' r=0
  910. <6>init: command 'mkdir' r=-17
  911. <6>init: command 'chmod' r=0
  912. <6>init: command 'mkdir' r=-17
  913. <6>init: command 'symlink' r=-1
  914. <6>init: command 'chown' r=0
  915. <6>init: command 'chown' r=0
  916. <6>init: command 'chmod' r=0
  917. <6>init: command 'chmod' r=0
  918. <6>init: command 'mkdir' r=-17
  919. <6>init: command 'mkdir' r=-17
  920. <6>init: command 'chown' r=0
  921. <6>init: command 'chmod' r=0
  922. <6>init: command 'chown' r=0
  923. <6>init: command 'chmod' r=0
  924. <6>init: command 'chown' r=0
  925. <6>init: command 'chmod' r=0
  926. <6>init: command 'chmod' r=0
  927. <6>init: command 'mkdir' r=-17
  928. <6>init: command 'mount' r=0
  929. <6>init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  930. <4>[SIF:INF] Zone[ 2, 0]: nDgn( 251) nVbn( 908) S( 19)-E( 55) nCPOffs( 56)
  931.  
  932. <4>[SIF:INF] Zone[ 2, 0]: nDgn( 287) nVbn( 993) S( 16)-E( 51) nCPOffs( 52)
  933.  
  934. <4>[SIF:INF] Zone[ 2, 0]: nDgn( 305) nVbn( 1166) S( 7)-E( 39) nCPOffs( 40)
  935.  
  936. <6>init: processing action 0x34f60 (boot)
  937. <3>fsa:uart_switch_store:PDA
  938. <3>fsa:param_save_path:uart(1)usb(1)usb(4),uart_debug(0)
  939. <6>inside set_param_value1 idx = 4, value = -993927476
  940. <3>lfs_param_op: filp_open failed. (-2)
  941. <3>fsa:_set_switch_sel:param switch sel 0x15
  942. <3>fsa:line_path_ctl:HWREV : 0xa
  943. <3>fsa:_path_ctl_usb:usb 1
  944. <4>[FSA9480_Enable_AP_USB] Enable AP USB
  945. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  946. <6>init: command 'write' r=0
  947. <3>fsa:usb_sel_store:
  948. <3>fsa:usb_sel_store:PDA
  949. <3>fsa:param_save_path:uart(1)usb(1)usb(4),uart_debug(0)
  950. <6>inside set_param_value1 idx = 4, value = -993927484
  951. <3>lfs_param_op: filp_open failed. (-2)
  952. <3>fsa:_set_switch_sel:param switch sel 0x15
  953. <3>fsa:line_path_ctl:HWREV : 0xa
  954. <3>fsa:_path_ctl_usb:usb 1
  955. <4>[FSA9480_Enable_AP_USB] Enable AP USB
  956. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  957. <6>init: command 'write' r=0
  958. <6>init: command 'ifup' r=0
  959. <6>init: command 'hostname' r=0
  960. <6>init: command 'domainname' r=0
  961. <6>init: command 'setrlimit' r=0
  962. <6>init: command 'write' r=-2
  963. <6>init: command 'setprop' r=0
  964. <6>init: command 'setprop' r=0
  965. <6>init: command 'setprop' r=0
  966. <6>init: command 'setprop' r=0
  967. <6>init: command 'setprop' r=0
  968. <6>init: command 'setprop' r=0
  969. <6>init: command 'setprop' r=0
  970. <6>init: command 'setprop' r=0
  971. <6>init: command 'setprop' r=0
  972. <6>init: command 'setprop' r=0
  973. <6>init: command 'setprop' r=0
  974. <6>init: command 'setprop' r=0
  975. <6>init: command 'setprop' r=0
  976. <6>init: command 'setprop' r=0
  977. <6>init: command 'setprop' r=0
  978. <6>init: command 'setprop' r=0
  979. <6>init: command 'setprop' r=0
  980. <6>init: command 'setprop' r=0
  981. <6>init: command 'write' r=0
  982. <6>init: command 'write' r=0
  983. <6>init: command 'write' r=0
  984. <6>init: command 'write' r=0
  985. <6>init: command 'write' r=0
  986. <6>init: command 'write' r=0
  987. <6>init: command 'write' r=0
  988. <6>init: command 'write' r=0
  989. <6>init: command 'chmod' r=-30
  990. <6>init: command 'chown' r=-2
  991. <6>init: command 'chown' r=-2
  992. <6>init: command 'chown' r=-2
  993. <6>init: command 'chown' r=-2
  994. <6>init: command 'chown' r=-2
  995. <6>init: command 'chown' r=0
  996. <6>init: command 'chown' r=0
  997. <6>init: command 'chown' r=0
  998. <6>init: command 'chown' r=0
  999. <6>init: command 'chmod' r=0
  1000. <6>init: command 'chmod' r=0
  1001. <6>init: command 'chmod' r=0
  1002. <6>init: command 'chmod' r=0
  1003. <6>init: command 'chown' r=0
  1004. <6>init: command 'chmod' r=0
  1005. <6>init: command 'chown' r=-2
  1006. <6>init: command 'chown' r=-2
  1007. <6>init: command 'chown' r=-2
  1008. <6>init: command 'chown' r=-2
  1009. <6>init: command 'chown' r=-2
  1010. <6>init: command 'chown' r=-2
  1011. <6>init: command 'chown' r=-2
  1012. <6>init: command 'chown' r=-2
  1013. <6>init: command 'chown' r=-2
  1014. <6>init: command 'chown' r=-2
  1015. <6>init: command 'chown' r=-2
  1016. <6>init: command 'chown' r=-2
  1017. <6>init: command 'chown' r=0
  1018. <6>init: command 'chown' r=0
  1019. <6>init: command 'chown' r=0
  1020. <6>init: command 'chown' r=0
  1021. <6>init: command 'chown' r=0
  1022. <6>init: command 'chown' r=0
  1023. <6>init: command 'chown' r=0
  1024. <6>init: command 'chown' r=0
  1025. <6>init: command 'chown' r=-2
  1026. <6>init: command 'chmod' r=-2
  1027. <6>init: command 'chown' r=0
  1028. <6>init: command 'chmod' r=0
  1029. <6>init: command 'chown' r=-2
  1030. <6>init: command 'chmod' r=-2
  1031. <6>init: command 'chown' r=0
  1032. <6>init: command 'chmod' r=0
  1033. <6>init: command 'chown' r=-2
  1034. <6>init: command 'chown' r=-2
  1035. <6>init: command 'chown' r=-2
  1036. <6>init: command 'chmod' r=-2
  1037. <6>init: command 'chown' r=-2
  1038. <6>init: command 'chmod' r=-2
  1039. <6>init: command 'chown' r=-2
  1040. <6>init: command 'chmod' r=-2
  1041. <6>init: command 'chown' r=0
  1042. <6>init: command 'chmod' r=0
  1043. <6>init: command 'chown' r=0
  1044. <6>init: command 'chmod' r=0
  1045. <6>init: command 'chown' r=0
  1046. <6>init: command 'chmod' r=0
  1047. <6>init: command 'chown' r=0
  1048. <6>init: command 'chmod' r=0
  1049. <6>init: command 'chown' r=-2
  1050. <6>init: command 'chown' r=-2
  1051. <6>init: command 'setprop' r=0
  1052. <6>init: command 'setprop' r=0
  1053. <6>init: command 'setprop' r=0
  1054. <6>init: command 'setprop' r=0
  1055. <6>init: command 'setprop' r=0
  1056. <6>init: command 'setprop' r=0
  1057. <6>init: command 'setprop' r=0
  1058. <6>init: command 'chown' r=-2
  1059. <6>init: command 'chown' r=-2
  1060. <6>init: command 'chown' r=0
  1061. <6>init: command 'chmod' r=-2
  1062. <6>init: command 'chmod' r=-2
  1063. <6>init: command 'chown' r=0
  1064. <6>init: command 'chmod' r=0
  1065. <6>init: command 'chmod' r=0
  1066. <6>init: command 'chmod' r=0
  1067. <6>init: command 'chmod' r=0
  1068. <6>init: command 'chmod' r=0
  1069. <6>init: command 'chmod' r=0
  1070. <6>init: command 'chmod' r=0
  1071. <6>init: command 'chown' r=0
  1072. <6>init: command 'chmod' r=0
  1073. <6>init: command 'chown' r=0
  1074. <6>init: command 'chmod' r=0
  1075. <6>init: command 'chown' r=0
  1076. <6>init: command 'chmod' r=0
  1077. <6>init: command 'chmod' r=-2
  1078. <6>init: command 'exec' r=-1
  1079. <5>init: starting 'console'
  1080. <6>init: init.svc.console : running
  1081. <5>init: starting 'pvrsrvinit'
  1082. <6>init: init.svc.pvrsrvinit : running
  1083. <5>init: starting 'servicemanager'
  1084. <6>init: init.svc.servicemanager : running
  1085. <5>init: starting 'vold'
  1086. <6>init: init.svc.vold : running
  1087. <5>init: starting 'netd'
  1088. <6>init: init.svc.netd : running
  1089. <5>init: starting 'debuggerd'
  1090. <6>init: init.svc.debuggerd : running
  1091. <5>init: starting 'ril-daemon'
  1092. <6>init: init.svc.ril-daemon : running
  1093. <5>init: starting 'zygote'
  1094. <6>init: init.svc.zygote : running
  1095. <5>init: starting 'media'
  1096. <6>init: init.svc.media : running
  1097. <3>init: cannot find '/system/bin/killmediaserver', disabling 'killmediaserver'
  1098. <5>init: starting 'dbus'
  1099. <6>init: init.svc.dbus : running
  1100. <5>init: starting 'installd'
  1101. <6>init: init.svc.installd : running
  1102. <5>init: starting 'sensor-daemon'
  1103. <6>init: init.svc.sensor-daemon : running
  1104. <5>init: starting 'keystore'
  1105. <6>init: init.svc.keystore : running
  1106. <5>init: starting 'tvout'
  1107. <6>init: init.svc.tvout : running
  1108. <6>init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  1109. <6>init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  1110. <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  1111. <6>init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  1112. <6>init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  1113. <6>init: Created socket '/dev/socket/dbus_bluetooth' with mode '660', user '1002', group '1002'
  1114. <6>init: Created socket '/dev/socket/bluetooth' with mode '660', user '1002', group '1002'
  1115. <6>init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
  1116. <6>init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  1117. <6>init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  1118. <6>init: command 'class_start' r=0
  1119. <6>init: processing action 0x38098 (boot)
  1120. <6>init: command 'setprop' r=0
  1121. <6>init: command 'setprop' r=0
  1122. <6>init: command 'setprop' r=0
  1123. <6>init: command 'setprop' r=0
  1124. <6>init: command 'setprop' r=0
  1125. <6>init: command 'setprop' r=0
  1126. <6>init: command 'setprop' r=0
  1127. <6>init: processing action 0x36488 (property:persist.service.adb.enable=1)
  1128. <5>init: starting 'adbd'
  1129. <6>init: init.svc.adbd : running
  1130. <6>init: command 'start' r=0
  1131. <3>init: [WLAN] insmod hotspot_event_monitoring Driver insmod!!
  1132. <3>fsa:_get_switch_sel:param switch sel 0x15
  1133. <3>fsa:param_load_path:usb_path(1),uart_path(1),uart_debug_enable(0)
  1134. <3>fsa:param_load_path:SWITCH_SEL USB 4
  1135. <3>fsa:UsbMenuSelStore:fsa UsbMenuSelStore SWITCH_SEL Store arg(10) sel= 0x205 usb_func(9)
  1136. <3>fsa:param_save_path:uart(1)usb(1)usb(9),uart_debug(0)
  1137. <6>inside set_param_value1 idx = 4, value = -579560076
  1138. <3>lfs_param_op: filp_open failed. (-2)
  1139. <3>fsa:_set_switch_sel:param switch sel 0x205
  1140. <3>fsa:line_path_ctl:HWREV : 0xa
  1141. <3>fsa:_path_ctl_usb:usb 1
  1142. <4>[FSA9480_Enable_AP_USB] Enable AP USB
  1143. <4>[ap_usb_power_on]AP USB Power OFF, askon: 0, mtp : 1
  1144. <6>enabling adb
  1145. <4>[USB] enable_adb - enable(0x10), prev_status(0x02)
  1146. <4>Here is enable_adb@@@@
  1147. <4>[enable_adb]USBSTATUS_ADB
  1148. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2800
  1149. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd2988
  1150. <4>[usb_ep_autoconfig_reset_realloc] reset EP 0xc0cd29c0
  1151. <6>acm_function_config_changed
  1152. <4>[acm_function_config_changed] Skip EP Realloc in =0xc0cd2720 , out =0xc0cd26e8, int =0xc0cd2758
  1153. <6>diag_function_config_changed
  1154. <4>[diag_function_config_changed] Skip EP Realloc in =0xc0cd27c8 , out =0xc0cd2790
  1155. <6>nmea_function_config_changed
  1156. <4>[nmea_function_config_changed] Skip EP Realloc in =0xc0cd2870 , out =0xc0cd2838
  1157. <6>mass_storage_function_config_changed
  1158. <4>[mass_storage_function_config_changed] Skip EP Realloc in =0xc0cd2918 , out =0xc0cd28a8
  1159. <6>adb_function_config_changed
  1160. <4>[usb_specific_ep_realloc] ep in =0xc0cd29c0
  1161. <4>[usb_specific_ep_realloc] ep out =0xc0cd2988
  1162. <4>[create_bulk_endpoints_realloc] Specific EP Reallocin =0xc0cd29c0 , out =0xc0cd2988
  1163. <4> interface 0 = acm/c4cbd600
  1164. <4> interface 1 = acm/c4cbd600
  1165. <4> interface 2 = diag/c4e52000
  1166. <4> interface 3 = nmea/c4e52100
  1167. <4> interface 4 = usb_mass_storage/c4e50800
  1168. <4> interface 5 = adb/c4e59900
  1169. <4>[ap_usb_power_on]AP USB Power ON, askon: 0, mtp : 0
  1170. <4>[ap_usb_power_on]AP samsung_kies_mtp_mode_flag0, mtp:0
  1171. <6>adb_function_suspend
  1172. <6>s3c_udc_wakeup
  1173. <4>PKD:: OTG core got reset!!!
  1174. <4>hotspot_event_monitoring_init start
  1175. <4>hotspot_event_monitoring_init finished
  1176. <3>init: ret of init_module:(0)
  1177. <3>init: [WLAN] insmod hotspot_event_monitoring Driver load finished!!
  1178. <4>[SIF:INF] Zone[ 2, 0]: nDgn( 343) nVbn( 880) S( 9)-E( 11) nCPOffs( 12)
  1179.  
  1180. <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
  1181. <3>init: wifi.mac_addr: check_wifi_address()
  1182. <3>init: wifi.mac_addr: .mac.info already exist!
  1183. <3>init: Cannot open "/system/bin/.BT_26_0M.hcd": Unknown error: -1
  1184. <6>init: make_device '/dev/block/bml0!c' block 1, major 137, minor 0 r=0
  1185. <6>init: make_device '/dev/block/bml1' block 1, major 137, minor 1 r=0
  1186. <6>init: make_device '/dev/block/bml2' block 1, major 137, minor 2 r=0
  1187. <6>init: make_device '/dev/block/bml3' block 1, major 137, minor 3 r=0
  1188. <6>init: make_device '/dev/block/bml4' block 1, major 137, minor 4 r=0
  1189. <6>init: make_device '/dev/block/bml5' block 1, major 137, minor 5 r=0
  1190. <6>init: make_device '/dev/block/bml6' block 1, major 137, minor 6 r=0
  1191. <6>init: make_device '/dev/block/bml7' block 1, major 137, minor 7 r=0
  1192. <6>init: make_device '/dev/block/bml8' block 1, major 137, minor 8 r=0
  1193. <6>init: make_device '/dev/block/bml9' block 1, major 137, minor 9 r=0
  1194. <6>init: make_device '/dev/block/bml10' block 1, major 137, minor 10 r=0
  1195. <6>init: make_device '/dev/block/bml11' block 1, major 137, minor 11 r=0
  1196. <6>init: make_device '/dev/block/bml12' block 1, major 137, minor 12 r=0
  1197. <6>init: make_device '/dev/block/bml13' block 1, major 137, minor 13 r=0
  1198. <6>init: make_device '/dev/block/stl1' block 1, major 138, minor 1 r=0
  1199. <6>init: make_device '/dev/block/stl2' block 1, major 138, minor 2 r=0
  1200. <6>init: make_device '/dev/block/stl3' block 1, major 138, minor 3 r=0
  1201. <6>init: make_device '/dev/block/stl4' block 1, major 138, minor 4 r=0
  1202. <6>init: make_device '/dev/block/stl5' block 1, major 138, minor 5 r=0
  1203. <6>init: make_device '/dev/block/stl6' block 1, major 138, minor 6 r=0
  1204. <6>init: make_device '/dev/block/stl7' block 1, major 138, minor 7 r=0
  1205. <6>init: make_device '/dev/block/stl8' block 1, major 138, minor 8 r=0
  1206. <6>init: make_device '/dev/block/stl9' block 1, major 138, minor 9 r=0
  1207. <6>init: make_device '/dev/block/stl10' block 1, major 138, minor 10 r=0
  1208. <6>init: make_device '/dev/block/stl11' block 1, major 138, minor 11 r=0
  1209. <6>init: make_device '/dev/block/stl12' block 1, major 138, minor 12 r=0
  1210. <6>init: make_device '/dev/block/stl13' block 1, major 138, minor 13 r=0
  1211. <6>init: make_device '/dev/storage' block 0, major 10, minor 135 r=0
  1212. <6>init: make_device '/dev/tspdrv' block 0, major 10, minor 44 r=0
  1213. <6>init: make_device '/dev/bthid' block 0, major 10, minor 224 r=0
  1214. <6>init: make_device '/dev/onedram' block 0, major 253, minor 0 r=0
  1215. <6>init: make_device '/dev/dpram0' block 0, major 232, minor 1 r=0
  1216. <6>init: make_device '/dev/dpram1' block 0, major 232, minor 2 r=0
  1217. <6>init: make_device '/dev/dpramerr' block 0, major 232, minor 0 r=0
  1218. <6>init: make_device '/dev/ttyCDMA0' block 0, major 251, minor 0 r=0
  1219. <6>init: make_device '/dev/ttyETS0' block 0, major 251, minor 6 r=0
  1220. <6>init: make_device '/dev/ttySCRN0' block 0, major 251, minor 7 r=0
  1221. <6>init: make_device '/dev/ttyDEBUG0' block 0, major 251, minor 8 r=0
  1222. <6>init: make_device '/dev/ttyCSD0' block 0, major 251, minor 9 r=0
  1223. <6>init: make_device '/dev/ttyPTP0' block 0, major 251, minor 10 r=0
  1224. <6>init: make_device '/dev/multipdp' block 0, major 10, minor 132 r=0
  1225. <6>init: make_device '/dev/nvs' block 0, major 10, minor 136 r=0
  1226. <6>init: make_device '/dev/hotspot_event_monitoring' block 0, major 123, minor 0 r=0
  1227. <6>init: make_device '/dev/block/ram0' block 1, major 1, minor 0 r=0
  1228. <6>init: make_device '/dev/block/ram1' block 1, major 1, minor 1 r=0
  1229. <6>init: make_device '/dev/block/ram2' block 1, major 1, minor 2 r=0
  1230. <6>init: make_device '/dev/block/ram3' block 1, major 1, minor 3 r=0
  1231. <6>init: waitpid returned pid 2385, status = 00000100
  1232. <5>init: process 'pvrsrvinit', pid 2385 exited
  1233. <6>init: init.svc.pvrsrvinit : stopped
  1234. <6>init: make_device '/dev/block/ram4' block 1, major 1, minor 4 r=0
  1235. <6>init: make_device '/dev/block/ram5' block 1, major 1, minor 5 r=0
  1236. <6>init: make_device '/dev/block/ram6' block 1, major 1, minor 6 r=0
  1237. <6>init: make_device '/dev/block/ram7' block 1, major 1, minor 7 r=0
  1238. <6>init: make_device '/dev/block/ram8' block 1, major 1, minor 8 r=0
  1239. <6>init: make_device '/dev/block/ram9' block 1, major 1, minor 9 r=0
  1240. <6>init: make_device '/dev/block/ram10' block 1, major 1, minor 10 r=0
  1241. <6>init: make_device '/dev/block/ram11' block 1, major 1, minor 11 r=0
  1242. <6>init: make_device '/dev/block/ram12' block 1, major 1, minor 12 r=0
  1243. <6>init: make_device '/dev/block/ram13' block 1, major 1, minor 13 r=0
  1244. <6>init: make_device '/dev/block/ram14' block 1, major 1, minor 14 r=0
  1245. <6>init: make_device '/dev/block/ram15' block 1, major 1, minor 15 r=0
  1246. <6>init: make_device '/dev/block/loop0' block 1, major 7, minor 0 r=0
  1247. <6>init: make_device '/dev/block/loop1' block 1, major 7, minor 1 r=0
  1248. <6>init: make_device '/dev/block/loop2' block 1, major 7, minor 2 r=0
  1249. <6>init: make_device '/dev/block/loop3' block 1, major 7, minor 3 r=0
  1250. <6>init: waitpid returned pid 2390, status = 0000ff00
  1251. <5>init: process 'ril-daemon', pid 2390 exited
  1252. <5>init: process 'ril-daemon' killing any children in process group
  1253. <6>init: init.svc.ril-daemon : restarting
  1254. <6>init: make_device '/dev/block/loop4' block 1, major 7, minor 4 r=0
  1255. <6>init: make_device '/dev/block/loop5' block 1, major 7, minor 5 r=0
  1256. <6>init: make_device '/dev/block/loop6' block 1, major 7, minor 6 r=0
  1257. <6>init: make_device '/dev/block/loop7' block 1, major 7, minor 7 r=0
  1258. <6>init: make_device '/dev/block/tfsr0!c' block 1, major 139, minor 0 r=0
  1259. <6>init: make_device '/dev/block/tfsr1' block 1, major 139, minor 1 r=0
  1260. <6>init: make_device '/dev/block/tfsr2' block 1, major 139, minor 2 r=0
  1261. <6>init: make_device '/dev/block/tfsr3' block 1, major 139, minor 3 r=0
  1262. <6>init: make_device '/dev/block/tfsr4' block 1, major 139, minor 4 r=0
  1263. <6>init: make_device '/dev/block/tfsr5' block 1, major 139, minor 5 r=0
  1264. <6>init: make_device '/dev/block/tfsr6' block 1, major 139, minor 6 r=0
  1265. <6>init: make_device '/dev/block/tfsr7' block 1, major 139, minor 7 r=0
  1266. <6>init: make_device '/dev/block/tfsr8' block 1, major 139, minor 8 r=0
  1267. <6>init: make_device '/dev/block/tfsr9' block 1, major 139, minor 9 r=0
  1268. <6>init: make_device '/dev/block/tfsr10' block 1, major 139, minor 10 r=0
  1269. <6>init: make_device '/dev/block/tfsr11' block 1, major 139, minor 11 r=0
  1270. <6>init: make_device '/dev/block/tfsr12' block 1, major 139, minor 12 r=0
  1271. <6>init: make_device '/dev/block/tfsr13' block 1, major 139, minor 13 r=0
  1272. <6>init: make_device '/dev/block/mmcblk0' block 1, major 179, minor 0 r=0
  1273. <6>init: make_device '/dev/block/mmcblk0p1' block 1, major 179, minor 1 r=0
  1274. <6>init: make_device '/dev/block/mmcblk0p2' block 1, major 179, minor 2 r=0
  1275. <4>acm_disconnected
  1276. <6>init: make_device '/dev/block/mmcblk0p3' block 1, major 179, minor 3 r=0
  1277. <6>init: make_device '/dev/block/mmcblk1' block 1, major 179, minor 8 r=0
  1278. <6>init: make_device '/dev/block/mmcblk1p1' block 1, major 179, minor 9 r=0
  1279. <6>init: make_device '/dev/block/bml0!c' block 1, major 137, minor 0 r=0
  1280. <6>init: make_device '/dev/block/bml1' block 1, major 137, minor 1 r=0
  1281. <6>init: make_device '/dev/block/bml2' block 1, major 137, minor 2 r=0
  1282. <6>init: make_device '/dev/block/bml3' block 1, major 137, minor 3 r=0
  1283. <6>init: make_device '/dev/block/bml4' block 1, major 137, minor 4 r=0
  1284. <6>init: make_device '/dev/block/bml5' block 1, major 137, minor 5 r=0
  1285. <6>init: make_device '/dev/block/bml6' block 1, major 137, minor 6 r=0
  1286. <6>init: make_device '/dev/block/bml7' block 1, major 137, minor 7 r=0
  1287. <6>init: make_device '/dev/block/bml8' block 1, major 137, minor 8 r=0
  1288. <6>init: make_device '/dev/block/bml9' block 1, major 137, minor 9 r=0
  1289. <6>init: make_device '/dev/block/bml10' block 1, major 137, minor 10 r=0
  1290. <6>init: make_device '/dev/block/bml11' block 1, major 137, minor 11 r=0
  1291. <6>init: make_device '/dev/block/bml12' block 1, major 137, minor 12 r=0
  1292. <6>init: make_device '/dev/block/bml13' block 1, major 137, minor 13 r=0
  1293. <6>init: make_device '/dev/block/stl1' block 1, major 138, minor 1 r=0
  1294. <6>init: make_device '/dev/block/stl2' block 1, major 138, minor 2 r=0
  1295. <6>init: make_device '/dev/block/stl3' block 1, major 138, minor 3 r=0
  1296. <6>init: make_device '/dev/block/stl4' block 1, major 138, minor 4 r=0
  1297. <6>init: make_device '/dev/block/stl5' block 1, major 138, minor 5 r=0
  1298. <6>init: make_device '/dev/block/stl6' block 1, major 138, minor 6 r=0
  1299. <6>init: make_device '/dev/block/stl7' block 1, major 138, minor 7 r=0
  1300. <6>init: make_device '/dev/block/stl8' block 1, major 138, minor 8 r=0
  1301. <6>init: make_device '/dev/block/stl9' block 1, major 138, minor 9 r=0
  1302. <6>init: make_device '/dev/block/stl10' block 1, major 138, minor 10 r=0
  1303. <6>init: make_device '/dev/block/stl11' block 1, major 138, minor 11 r=0
  1304. <6>init: make_device '/dev/block/stl12' block 1, major 138, minor 12 r=0
  1305. <6>init: make_device '/dev/block/stl13' block 1, major 138, minor 13 r=0
  1306. <3>fsa:print_switch_state:usbstatus 1, currentusbstatus 16
  1307. <4>[USB:UMS] fsg_function_setup, return to PC fsg->nluns=2
  1308. <4>printk:do_inquiry fsg->cdrom 0 curlun->id 0
  1309. <4>printk:do_inquiry fsg->cdrom 0 curlun->id 0
  1310. <4>printk:do_inquiry fsg->cdrom 0 curlun->id 1
  1311. <4>printk:do_inquiry fsg->cdrom 0 curlun->id 1
  1312. <3>[DPRAM][DPRAM] Entering command_handler(0x0008)
  1313. <3>[DPRAM] magic code = aa, access enable = 1
  1314. <3>[DPRAM] Send 0xc2 to MailboxBA (Dpram init finish).
  1315. <3>[DPRAM]tty channel(id:17) is not opened.
  1316. <3>[DPRAM]tty channel(id:17) is not opened.
  1317. <6>init: make_device '/dev/vcs7' block 0, major 7, minor 7 r=0
  1318. <5>init: starting 'ril-daemon'
  1319. <6>init: init.svc.ril-daemon : running
  1320. <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  1321. <6>init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  1322. <6>init: make_device '/dev/vcsa7' block 0, major 7, minor 135 r=0
  1323. <6>init: waitpid returned pid 2502, status = 0000ff00
  1324. <5>init: process 'ril-daemon', pid 2502 exited
  1325. <5>init: process 'ril-daemon' killing any children in process group
  1326. <6>init: init.svc.ril-daemon : restarting
  1327. <6>init: waitpid returned pid 2391, status = 00000009
  1328. <5>init: process 'zygote', pid 2391 exited
  1329. <5>init: process 'zygote' killing any children in process group
  1330. <6>request_suspend_state: wakeup (3->0) at 15320635317 (2005-01-01 00:05:10.114328321 UTC)
  1331. <6>init: init.svc.zygote : restarting
  1332. <5>init: starting 'zygote'
  1333. <6>init: init.svc.zygote : running
  1334. <6>init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  1335. <3>[DPRAM][DPRAM] Entering command_handler(0x000D)
  1336. <3>[DPRAM][DPRAM] Entering command_handler(0x000D)
  1337. <3>[DPRAM][DPRAM] fmt_rcv_tasklet_handler(): Dropping data(2)...
  1338. <3>[DPRAM][DPRAM] dpram_drop_data, head: 12, tail: 0
  1339. <3>[DPRAM][DPRAM] fmt_rcv_tasklet_handler(): Dropping data(2)...
  1340. <3>[DPRAM][DPRAM] dpram_drop_data, head: 477, tail: 12
  1341. <5>init: starting 'ril-daemon'
  1342. <6>init: init.svc.ril-daemon : running
  1343. <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  1344. <6>init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  1345. <6>init: waitpid returned pid 2513, status = 0000ff00
  1346. <5>init: process 'ril-daemon', pid 2513 exited
  1347. <5>init: process 'ril-daemon' killing any children in process group
  1348. <6>init: init.svc.ril-daemon : restarting
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!