Guest User

Untitled

a guest
Jan 29th, 2015
202
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.13.5 (root@mvlabat) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #5 SMP Wed Jan 28 12:36:02 Local time zone must be set--see zic
  5. [ 0.000000] Command line: root=/dev/sda7
  6. [ 0.000000] e820: BIOS-provided physical RAM map:
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
  9. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  10. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008caaffff] usable
  11. [ 0.000000] BIOS-e820: [mem 0x000000008cab0000-0x000000008deaffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x000000008deb0000-0x0000000092abefff] usable
  13. [ 0.000000] BIOS-e820: [mem 0x0000000092abf000-0x0000000092ebefff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000092ebf000-0x0000000092fbefff] ACPI NVS
  15. [ 0.000000] BIOS-e820: [mem 0x0000000092fbf000-0x0000000092ffefff] ACPI data
  16. [ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable
  17. [ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  19. [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
  20. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  21. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
  22. [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
  24. [ 0.000000] NX (Execute Disable) protection: active
  25. [ 0.000000] SMBIOS 2.7 present.
  26. [ 0.000000] DMI: LENOVO 20287/VIUU4, BIOS 8DCN39WW 04/04/2014
  27. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  28. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  29. [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
  30. [ 0.000000] MTRR default type: uncachable
  31. [ 0.000000] MTRR fixed ranges enabled:
  32. [ 0.000000] 00000-9FFFF write-back
  33. [ 0.000000] A0000-BFFFF uncachable
  34. [ 0.000000] C0000-E7FFF write-protect
  35. [ 0.000000] E8000-EFFFF write-combining
  36. [ 0.000000] F0000-FFFFF write-protect
  37. [ 0.000000] MTRR variable ranges enabled:
  38. [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
  39. [ 0.000000] 1 base 0093000000 mask 7FFF000000 uncachable
  40. [ 0.000000] 2 base 0094000000 mask 7FFC000000 uncachable
  41. [ 0.000000] 3 base 0098000000 mask 7FF8000000 uncachable
  42. [ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable
  43. [ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable
  44. [ 0.000000] 6 disabled
  45. [ 0.000000] 7 disabled
  46. [ 0.000000] 8 disabled
  47. [ 0.000000] 9 disabled
  48. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  49. [ 0.000000] e820: update [mem 0x93000000-0xffffffff] usable ==> reserved
  50. [ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000
  51. [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
  52. [ 0.000000] Scanning 1 areas for low memory corruption
  53. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  54. [ 0.000000] Using GB pages for direct mapping
  55. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  56. [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
  57. [ 0.000000] BRK [0x01eb6000, 0x01eb6fff] PGTABLE
  58. [ 0.000000] BRK [0x01eb7000, 0x01eb7fff] PGTABLE
  59. [ 0.000000] BRK [0x01eb8000, 0x01eb8fff] PGTABLE
  60. [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
  61. [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
  62. [ 0.000000] BRK [0x01eb9000, 0x01eb9fff] PGTABLE
  63. [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
  64. [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
  65. [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
  66. [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
  67. [ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
  68. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x8caaffff]
  69. [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
  70. [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
  71. [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
  72. [ 0.000000] [mem 0x80000000-0x8c9fffff] page 2M
  73. [ 0.000000] [mem 0x8ca00000-0x8caaffff] page 4k
  74. [ 0.000000] init_memory_mapping: [mem 0x8deb0000-0x92abefff]
  75. [ 0.000000] [mem 0x8deb0000-0x8dffffff] page 4k
  76. [ 0.000000] [mem 0x8e000000-0x929fffff] page 2M
  77. [ 0.000000] [mem 0x92a00000-0x92abefff] page 4k
  78. [ 0.000000] BRK [0x01eba000, 0x01ebafff] PGTABLE
  79. [ 0.000000] BRK [0x01ebb000, 0x01ebbfff] PGTABLE
  80. [ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff]
  81. [ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k
  82. [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
  83. [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
  84. [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 LENOVO)
  85. [ 0.000000] ACPI: XSDT 0000000092ffe210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
  86. [ 0.000000] ACPI: FACP 0000000092ff7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
  87. [ 0.000000] ACPI: DSDT 0000000092fe7000 00CB8B (v01 LENOVO CB-01 00000001 ACPI 00040000)
  88. [ 0.000000] ACPI: FACS 0000000092fba000 000040
  89. [ 0.000000] ACPI: SLIC 0000000092ffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  90. [ 0.000000] ACPI: UEFI 0000000092ffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  91. [ 0.000000] ACPI: FPDT 0000000092ffa000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  92. [ 0.000000] ACPI: POAT 0000000092ff9000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
  93. [ 0.000000] ACPI: ASF! 0000000092ff8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
  94. [ 0.000000] ACPI: HPET 0000000092ff6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  95. [ 0.000000] ACPI: APIC 0000000092ff5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
  96. [ 0.000000] ACPI: MCFG 0000000092ff4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
  97. [ 0.000000] ACPI: SSDT 0000000092fe6000 0007F9 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  98. [ 0.000000] ACPI: BOOT 0000000092fe4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  99. [ 0.000000] ACPI: LPIT 0000000092fe3000 00005C (v01 LENOVO CB-01 00000001 ACPI 00040000)
  100. [ 0.000000] ACPI: ASPT 0000000092fe1000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
  101. [ 0.000000] ACPI: DBGP 0000000092fe0000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  102. [ 0.000000] ACPI: SSDT 0000000092fd8000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  103. [ 0.000000] ACPI: SSDT 0000000092fd7000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  104. [ 0.000000] ACPI: SSDT 0000000092fd3000 0034C6 (v01 LENOVO CB-01 00000001 ACPI 00040000)
  105. [ 0.000000] ACPI: SSDT 0000000092fce000 00399A (v01 LENOVO CB-01 00000001 ACPI 00040000)
  106. [ 0.000000] ACPI: Local APIC address 0xfee00000
  107. [ 0.000000] No NUMA configuration found
  108. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
  109. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
  110. [ 0.000000] NODE_DATA [mem 0x25f5f9000-0x25f5fcfff]
  111. [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256e00000-ffff88025ebfffff] on node 0
  112. [ 0.000000] Zone ranges:
  113. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  114. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  115. [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
  116. [ 0.000000] Movable zone start for each node
  117. [ 0.000000] Early memory node ranges
  118. [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
  119. [ 0.000000] node 0: [mem 0x00100000-0x8caaffff]
  120. [ 0.000000] node 0: [mem 0x8deb0000-0x92abefff]
  121. [ 0.000000] node 0: [mem 0x92fff000-0x92ffffff]
  122. [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
  123. [ 0.000000] On node 0 totalpages: 2034780
  124. [ 0.000000] DMA zone: 64 pages used for memmap
  125. [ 0.000000] DMA zone: 21 pages reserved
  126. [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
  127. [ 0.000000] DMA32 zone: 9243 pages used for memmap
  128. [ 0.000000] DMA32 zone: 591552 pages, LIFO batch:31
  129. [ 0.000000] Normal zone: 22488 pages used for memmap
  130. [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
  131. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  132. [ 0.000000] ACPI: Local APIC address 0xfee00000
  133. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  134. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  135. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  136. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  137. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
  138. [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
  139. [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
  140. [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
  141. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  142. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  143. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  144. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  145. [ 0.000000] ACPI: IRQ0 used by override.
  146. [ 0.000000] ACPI: IRQ2 used by override.
  147. [ 0.000000] ACPI: IRQ9 used by override.
  148. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  149. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  150. [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
  151. [ 0.000000] nr_irqs_gsi: 40
  152. [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  153. [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  154. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  155. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  156. [ 0.000000] PM: Registered nosave memory: [mem 0x8cab0000-0x8deaffff]
  157. [ 0.000000] PM: Registered nosave memory: [mem 0x92abf000-0x92ebefff]
  158. [ 0.000000] PM: Registered nosave memory: [mem 0x92ebf000-0x92fbefff]
  159. [ 0.000000] PM: Registered nosave memory: [mem 0x92fbf000-0x92ffefff]
  160. [ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff]
  161. [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
  162. [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
  163. [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
  164. [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
  165. [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
  166. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  167. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
  168. [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
  169. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
  170. [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
  171. [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
  172. [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
  173. [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88025f200000 s79424 r8192 d22976 u262144
  174. [ 0.000000] pcpu-alloc: s79424 r8192 d22976 u262144 alloc=1*2097152
  175. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  176. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2002964
  177. [ 0.000000] Policy zone: Normal
  178. [ 0.000000] Kernel command line: root=/dev/sda7
  179. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  180. [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  181. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  182. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  183. [ 0.000000] Memory: 7927824K/8139120K available (7470K kernel code, 745K rwdata, 2596K rodata, 980K init, 1008K bss, 211296K reserved)
  184. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  185. [ 0.000000] Hierarchical RCU implementation.
  186. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  187. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
  188. [ 0.000000] Console: colour VGA+ 80x25
  189. [ 0.000000] console [tty0] enabled
  190. [ 0.000000] hpet clockevent registered
  191. [ 0.000000] tsc: Fast TSC calibration using PIT
  192. [ 0.001000] tsc: Detected 2195.147 MHz processor
  193. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.29 BogoMIPS (lpj=2195147)
  194. [ 0.000158] pid_max: default: 32768 minimum: 301
  195. [ 0.000251] Security Framework initialized
  196. [ 0.000327] SELinux: Initializing.
  197. [ 0.000406] SELinux: Starting in permissive mode
  198. [ 0.000852] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  199. [ 0.002496] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  200. [ 0.003245] Mount-cache hash table entries: 256
  201. [ 0.003463] Initializing cgroup subsys freezer
  202. [ 0.003557] CPU: Physical Processor ID: 0
  203. [ 0.003632] CPU: Processor Core ID: 0
  204. [ 0.003709] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  205. ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  206. [ 0.004790] mce: CPU supports 9 MCE banks
  207. [ 0.004881] CPU0: Thermal monitoring enabled (TM1)
  208. [ 0.004968] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
  209. Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
  210. tlb_flushall_shift: 6
  211. [ 0.005235] Freeing SMP alternatives memory: 28K (ffffffff81db1000 - ffffffff81db8000)
  212. [ 0.005402] ACPI: Core revision 20131115
  213. [ 0.013982] ACPI: All ACPI Tables successfully acquired
  214. [ 0.019538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  215. [ 0.029637] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (fam: 06, model: 3c, stepping: 03)
  216. [ 0.029926] TSC deadline timer enabled
  217. [ 0.029934] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
  218. [ 0.030298] ... version: 3
  219. [ 0.030400] ... bit width: 48
  220. [ 0.030502] ... generic registers: 4
  221. [ 0.030603] ... value mask: 0000ffffffffffff
  222. [ 0.030709] ... max period: 0000ffffffffffff
  223. [ 0.030814] ... fixed-purpose events: 3
  224. [ 0.030916] ... event mask: 000000070000000f
  225. [ 0.031225] x86: Booting SMP configuration:
  226. [ 0.031329] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
  227. [ 0.131098] x86: Booted up 1 node, 8 CPUs
  228. [ 0.132993] smpboot: Total of 8 processors activated (35122.35 BogoMIPS)
  229. [ 0.140095] devtmpfs: initialized
  230. [ 0.140308] PM: Registering ACPI NVS region [mem 0x92ebf000-0x92fbefff] (1048576 bytes)
  231. [ 0.140561] kworker/u16:0 (42) used greatest stack depth: 5936 bytes left
  232. [ 0.140666] RTC time: 14:37:17, date: 01/29/15
  233. [ 0.140698] NET: Registered protocol family 16
  234. [ 0.141051] cpuidle: using governor ladder
  235. [ 0.141155] cpuidle: using governor menu
  236. [ 0.141269] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  237. [ 0.141436] ACPI: bus type PCI registered
  238. [ 0.141605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  239. [ 0.141775] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  240. [ 0.163191] PCI: Using configuration type 1 for base access
  241. [ 0.169904] bio: create slab <bio-0> at 0
  242. [ 0.170143] ACPI: Added _OSI(Module Device)
  243. [ 0.170247] ACPI: Added _OSI(Processor Device)
  244. [ 0.170350] ACPI: Added _OSI(3.0 _SCP Extensions)
  245. [ 0.170454] ACPI: Added _OSI(Processor Aggregator Device)
  246. [ 0.174334] ACPI: Executed 2 blocks of module-level executable AML code
  247. [ 0.180792] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  248. [ 0.182152] ACPI: SSDT 0000000092e57c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
  249. [ 0.182871] ACPI: Dynamic OEM Table Load:
  250. [ 0.183051] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
  251. [ 0.186259] ACPI: SSDT 0000000092e57618 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
  252. [ 0.187045] ACPI: Dynamic OEM Table Load:
  253. [ 0.187226] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
  254. [ 0.192165] ACPI: SSDT 0000000092e61c18 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
  255. [ 0.192879] ACPI: Dynamic OEM Table Load:
  256. [ 0.193058] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
  257. [ 0.199344] ACPI: Interpreter enabled
  258. [ 0.199452] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
  259. [ 0.199701] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
  260. [ 0.199962] ACPI: (supports S0 S3 S4 S5)
  261. [ 0.200065] ACPI: Using IOAPIC for interrupt routing
  262. [ 0.200218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  263. [ 0.200558] ACPI: No dock devices found.
  264. [ 0.211143] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  265. [ 0.211257] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  266. [ 0.211917] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
  267. [ 0.212506] PCI host bridge to bus 0000:00
  268. [ 0.212610] pci_bus 0000:00: root bus resource [bus 00-fe]
  269. [ 0.212716] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  270. [ 0.212824] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  271. [ 0.212931] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  272. [ 0.213041] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
  273. [ 0.213156] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
  274. [ 0.213311] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
  275. [ 0.213343] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  276. [ 0.213446] pci 0000:00:01.0: System wakeup disabled by ACPI
  277. [ 0.213590] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
  278. [ 0.213622] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
  279. [ 0.213723] pci 0000:00:01.1: System wakeup disabled by ACPI
  280. [ 0.213870] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
  281. [ 0.213881] pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb53fffff 64bit]
  282. [ 0.213888] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
  283. [ 0.213892] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
  284. [ 0.214034] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
  285. [ 0.214041] pci 0000:00:03.0: reg 0x10: [mem 0xb5710000-0xb5713fff 64bit]
  286. [ 0.214208] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
  287. [ 0.214228] pci 0000:00:14.0: reg 0x10: [mem 0xb5700000-0xb570ffff 64bit]
  288. [ 0.214291] pci 0000:00:14.0: PME# supported from D3hot D3cold
  289. [ 0.214386] pci 0000:00:14.0: System wakeup disabled by ACPI
  290. [ 0.214534] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
  291. [ 0.214555] pci 0000:00:16.0: reg 0x10: [mem 0xb5718000-0xb571800f 64bit]
  292. [ 0.214618] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  293. [ 0.214764] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
  294. [ 0.214785] pci 0000:00:1a.0: reg 0x10: [mem 0xb571d000-0xb571d3ff]
  295. [ 0.214871] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  296. [ 0.214980] pci 0000:00:1a.0: System wakeup disabled by ACPI
  297. [ 0.215130] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
  298. [ 0.215146] pci 0000:00:1b.0: reg 0x10: [mem 0xb5714000-0xb5717fff 64bit]
  299. [ 0.215210] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  300. [ 0.215346] pci 0000:00:1c.0: [8086:8c16] type 01 class 0x060400
  301. [ 0.215413] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  302. [ 0.215510] pci 0000:00:1c.0: System wakeup disabled by ACPI
  303. [ 0.215658] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
  304. [ 0.215729] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  305. [ 0.215827] pci 0000:00:1c.4: System wakeup disabled by ACPI
  306. [ 0.215981] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
  307. [ 0.216002] pci 0000:00:1d.0: reg 0x10: [mem 0xb571c000-0xb571c3ff]
  308. [ 0.216088] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  309. [ 0.216195] pci 0000:00:1d.0: System wakeup disabled by ACPI
  310. [ 0.216348] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
  311. [ 0.216576] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
  312. [ 0.216595] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
  313. [ 0.216603] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
  314. [ 0.216612] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
  315. [ 0.216620] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
  316. [ 0.216628] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
  317. [ 0.216637] pci 0000:00:1f.2: reg 0x24: [mem 0xb571b000-0xb571b7ff]
  318. [ 0.216674] pci 0000:00:1f.2: PME# supported from D3hot
  319. [ 0.216801] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
  320. [ 0.216818] pci 0000:00:1f.3: reg 0x10: [mem 0xb5719000-0xb57190ff 64bit]
  321. [ 0.216838] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
  322. [ 0.217017] pci 0000:00:01.0: PCI bridge to [bus 01-06]
  323. [ 0.217124] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
  324. [ 0.217126] pci 0000:00:01.0: bridge window [mem 0xb4000000-0xb4ffffff]
  325. [ 0.217130] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
  326. [ 0.217180] pci 0000:07:00.0: [10de:1292] type 00 class 0x030200
  327. [ 0.217193] pci 0000:07:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
  328. [ 0.217207] pci 0000:07:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
  329. [ 0.217222] pci 0000:07:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
  330. [ 0.217231] pci 0000:07:00.0: reg 0x24: [io 0x4000-0x407f]
  331. [ 0.217241] pci 0000:07:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
  332. [ 0.219331] pci 0000:00:01.1: PCI bridge to [bus 07]
  333. [ 0.219437] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
  334. [ 0.219440] pci 0000:00:01.1: bridge window [mem 0xb3000000-0xb3ffffff]
  335. [ 0.219443] pci 0000:00:01.1: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
  336. [ 0.219527] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
  337. [ 0.219577] pci 0000:08:00.0: reg 0x10: [io 0x3000-0x30ff]
  338. [ 0.219689] pci 0000:08:00.0: reg 0x18: [mem 0xb5600000-0xb5600fff 64bit]
  339. [ 0.219749] pci 0000:08:00.0: reg 0x20: [mem 0xb5400000-0xb5403fff 64bit pref]
  340. [ 0.219834] pci 0000:08:00.0: supports D1 D2
  341. [ 0.219835] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  342. [ 0.219895] pci 0000:08:00.0: System wakeup disabled by ACPI
  343. [ 0.221373] pci 0000:00:1c.0: PCI bridge to [bus 08]
  344. [ 0.221480] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
  345. [ 0.221484] pci 0000:00:1c.0: bridge window [mem 0xb5600000-0xb56fffff]
  346. [ 0.221489] pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb54fffff 64bit pref]
  347. [ 0.221599] pci 0000:09:00.0: [8086:08b2] type 00 class 0x028000
  348. [ 0.221648] pci 0000:09:00.0: reg 0x10: [mem 0xb5500000-0xb5501fff 64bit]
  349. [ 0.221860] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
  350. [ 0.221903] pci 0000:09:00.0: System wakeup disabled by ACPI
  351. [ 0.223377] pci 0000:00:1c.4: PCI bridge to [bus 09]
  352. [ 0.223484] pci 0000:00:1c.4: bridge window [mem 0xb5500000-0xb55fffff]
  353. [ 0.223525] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
  354. [ 0.224475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
  355. [ 0.225076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
  356. [ 0.225633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
  357. [ 0.226229] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  358. [ 0.226787] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  359. [ 0.227482] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  360. [ 0.228174] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
  361. [ 0.228734] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
  362. [ 0.229661] ACPI: Enabled 6 GPEs in block 00 to 3F
  363. [ 0.229844] ACPI: \_SB_.PCI0: notify handler is installed
  364. [ 0.229904] Found 1 acpi root devices
  365. [ 0.229932] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  366. [ 0.230159] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  367. [ 0.230327] vgaarb: loaded
  368. [ 0.230427] vgaarb: bridge control possible 0000:00:02.0
  369. [ 0.230627] SCSI subsystem initialized
  370. [ 0.230809] libata version 3.00 loaded.
  371. [ 0.230890] ACPI: bus type USB registered
  372. [ 0.231036] usbcore: registered new interface driver usbfs
  373. [ 0.231163] usbcore: registered new interface driver hub
  374. [ 0.231299] usbcore: registered new device driver usb
  375. [ 0.231480] pps_core: LinuxPPS API ver. 1 registered
  376. [ 0.231585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  377. [ 0.231771] PTP clock support registered
  378. [ 0.232158] wmi: Mapper loaded
  379. [ 0.232286] Advanced Linux Sound Architecture Driver Initialized.
  380. [ 0.232393] PCI: Using ACPI for IRQ routing
  381. [ 0.238239] PCI: pci_cache_line_size set to 64 bytes
  382. [ 0.238282] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
  383. [ 0.238285] e820: reserve RAM buffer [mem 0x8cab0000-0x8fffffff]
  384. [ 0.238286] e820: reserve RAM buffer [mem 0x92abf000-0x93ffffff]
  385. [ 0.238287] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff]
  386. [ 0.238289] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
  387. [ 0.238415] NetLabel: Initializing
  388. [ 0.238518] NetLabel: domain hash size = 128
  389. [ 0.238623] NetLabel: protocols = UNLABELED CIPSOv4
  390. [ 0.238738] NetLabel: unlabeled traffic allowed by default
  391. [ 0.238858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  392. [ 0.239306] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  393. [ 0.241435] Switched to clocksource hpet
  394. [ 0.243909] pnp: PnP ACPI init
  395. [ 0.244015] ACPI: bus type PNP registered
  396. [ 0.244190] pnp 00:00: [dma 4]
  397. [ 0.244228] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
  398. [ 0.244269] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
  399. [ 0.244375] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
  400. [ 0.244442] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
  401. [ 0.244497] system 00:04: [io 0x0680-0x069f] has been reserved
  402. [ 0.244604] system 00:04: [io 0xffff] has been reserved
  403. [ 0.244710] system 00:04: [io 0xffff] has been reserved
  404. [ 0.244815] system 00:04: [io 0xffff] has been reserved
  405. [ 0.244921] system 00:04: [io 0x1800-0x18fe] could not be reserved
  406. [ 0.245028] system 00:04: [io 0x164e-0x164f] has been reserved
  407. [ 0.245136] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  408. [ 0.245196] system 00:05: [io 0x0800-0x087f] has been reserved
  409. [ 0.245304] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  410. [ 0.245345] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  411. [ 0.245405] system 00:07: [io 0x1854-0x1857] has been reserved
  412. [ 0.245523] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  413. [ 0.245590] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
  414. [ 0.245636] pnp 00:09: Plug and Play ACPI device, IDs SYN2b2a PNP0f13 (active)
  415. [ 0.245770] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
  416. [ 0.245879] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
  417. [ 0.245988] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
  418. [ 0.246097] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
  419. [ 0.246205] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  420. [ 0.246313] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
  421. [ 0.246422] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
  422. [ 0.246538] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
  423. [ 0.246647] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
  424. [ 0.246756] system 00:0a: [mem 0x9fa20000-0x9fa20fff] has been reserved
  425. [ 0.246865] system 00:0a: [mem 0x9fa10000-0x9fa1ffff] has been reserved
  426. [ 0.246973] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  427. [ 0.247409] pnp: PnP ACPI: found 11 devices
  428. [ 0.247521] ACPI: bus type PNP unregistered
  429. [ 0.255674] pci 0000:07:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
  430. [ 0.255864] pci 0000:00:01.0: PCI bridge to [bus 01-06]
  431. [ 0.255970] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
  432. [ 0.256078] pci 0000:00:01.0: bridge window [mem 0xb4000000-0xb4ffffff]
  433. [ 0.256188] pci 0000:00:01.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
  434. [ 0.256358] pci 0000:07:00.0: BAR 6: can't assign mem pref (size 0x80000)
  435. [ 0.256475] pci 0000:00:01.1: PCI bridge to [bus 07]
  436. [ 0.256580] pci 0000:00:01.1: bridge window [io 0x4000-0x4fff]
  437. [ 0.256688] pci 0000:00:01.1: bridge window [mem 0xb3000000-0xb3ffffff]
  438. [ 0.256798] pci 0000:00:01.1: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
  439. [ 0.256966] pci 0000:00:1c.0: PCI bridge to [bus 08]
  440. [ 0.257072] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
  441. [ 0.257182] pci 0000:00:1c.0: bridge window [mem 0xb5600000-0xb56fffff]
  442. [ 0.257293] pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb54fffff 64bit pref]
  443. [ 0.257473] pci 0000:00:1c.4: PCI bridge to [bus 09]
  444. [ 0.257580] pci 0000:00:1c.4: bridge window [mem 0xb5500000-0xb55fffff]
  445. [ 0.257696] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  446. [ 0.257697] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  447. [ 0.257699] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  448. [ 0.257700] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
  449. [ 0.257702] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
  450. [ 0.257703] pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb4ffffff]
  451. [ 0.257705] pci_bus 0000:01: resource 2 [mem 0xb2000000-0xb2ffffff 64bit pref]
  452. [ 0.257706] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
  453. [ 0.257707] pci_bus 0000:07: resource 1 [mem 0xb3000000-0xb3ffffff]
  454. [ 0.257709] pci_bus 0000:07: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
  455. [ 0.257710] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
  456. [ 0.257712] pci_bus 0000:08: resource 1 [mem 0xb5600000-0xb56fffff]
  457. [ 0.257713] pci_bus 0000:08: resource 2 [mem 0xb5400000-0xb54fffff 64bit pref]
  458. [ 0.257714] pci_bus 0000:09: resource 1 [mem 0xb5500000-0xb55fffff]
  459. [ 0.257737] NET: Registered protocol family 2
  460. [ 0.257969] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  461. [ 0.258263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  462. [ 0.258504] TCP: Hash tables configured (established 65536 bind 65536)
  463. [ 0.258625] TCP: reno registered
  464. [ 0.258734] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  465. [ 0.258865] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  466. [ 0.259027] NET: Registered protocol family 1
  467. [ 0.259191] RPC: Registered named UNIX socket transport module.
  468. [ 0.259298] RPC: Registered udp transport module.
  469. [ 0.259402] RPC: Registered tcp transport module.
  470. [ 0.259513] RPC: Registered tcp NFSv4.1 backchannel transport module.
  471. [ 0.259628] pci 0000:00:02.0: Boot video device
  472. [ 0.260875] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
  473. [ 0.261042] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
  474. [ 0.261292] pci 0000:00:1a.0: EHCI: BIOS handoff
  475. [ 0.273600] pci 0000:00:1d.0: EHCI: BIOS handoff
  476. [ 0.285494] PCI: CLS 64 bytes, default 64
  477. [ 0.285533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  478. [ 0.285643] software IO TLB [mem 0x8eabf000-0x92abf000] (64MB) mapped at [ffff88008eabf000-ffff880092abefff]
  479. [ 0.285837] Simple Boot Flag at 0x44 set to 0x1
  480. [ 0.286901] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x10
  481. [ 0.287013] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x10
  482. [ 0.287122] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x10
  483. [ 0.287234] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x10
  484. [ 0.287347] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x10
  485. [ 0.287466] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x10
  486. [ 0.287578] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x10
  487. [ 0.287691] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x10
  488. [ 0.289551] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  489. [ 0.289720] Scanning for low memory corruption every 60 seconds
  490. [ 0.290371] audit: initializing netlink socket (disabled)
  491. [ 0.290494] type=2000 audit(1422542237.269:1): initialized
  492. [ 0.311090] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  493. [ 0.313850] VFS: Disk quotas dquot_6.5.2
  494. [ 0.314007] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  495. [ 0.314946] NFS: Registering the id_resolver key type
  496. [ 0.315058] Key type id_resolver registered
  497. [ 0.315161] Key type id_legacy registered
  498. [ 0.315317] fuse init (API version 7.22)
  499. [ 0.315558] msgmni has been set to 15484
  500. [ 0.315726] SELinux: Registering netfilter hooks
  501. [ 0.316125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  502. [ 0.316291] io scheduler noop registered
  503. [ 0.316404] io scheduler deadline registered
  504. [ 0.316548] io scheduler cfq registered (default)
  505. [ 0.316793] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  506. [ 0.316948] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
  507. [ 0.317103] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
  508. [ 0.317247] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
  509. [ 0.317380] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  510. [ 0.325468] ACPI: AC Adapter [ADP0] (on-line)
  511. [ 0.325734] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  512. [ 0.325918] ACPI: Lid Switch [LID0]
  513. [ 0.326066] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  514. [ 0.326235] ACPI: Power Button [PWRB]
  515. [ 0.326390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  516. [ 0.326556] ACPI: Power Button [PWRF]
  517. [ 0.327055] Monitor-Mwait will be used to enter C-1 state
  518. [ 0.327067] Monitor-Mwait will be used to enter C-2 state
  519. [ 0.327078] ACPI: acpi_idle registered with cpuidle
  520. [ 0.329356] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  521. [ 0.330097] Non-volatile memory driver v1.3
  522. [ 0.330202] Linux agpgart interface v0.103
  523. [ 0.330452] [drm] Initialized drm 1.1.0 20060810
  524. [ 0.331263] [drm] Memory usable by graphics device = 2048M
  525. [ 0.359432] i915 0000:00:02.0: irq 44 for MSI/MSI-X
  526. [ 0.359439] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  527. [ 0.359547] [drm] Driver supports precise vblank timestamp query.
  528. [ 0.359744] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  529. [ 0.448359] ACPI: Battery Slot [BAT0] (battery present)
  530. [ 0.460249] fbcon: inteldrmfb (fb0) is primary device
  531. [ 1.286351] tsc: Refined TSC clocksource calibration: 2194.917 MHz
  532. [ 1.725847] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  533. [ 2.166474] Console: switching to colour frame buffer device 170x48
  534. [ 2.170967] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  535. [ 2.171006] i915 0000:00:02.0: registered panic notifier
  536. [ 2.171434] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
  537. [ 2.171846] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
  538. [ 2.172016] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
  539. [ 2.172090] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8802558b1cf8), AE_NOT_FOUND (20131115/psparse-536)
  540. [ 2.172273] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:40/LNXVIDEO:00/input/input3
  541. [ 2.178595] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  542. [ 2.179044] acpi device:5a: registered as cooling_device8
  543. [ 2.179172] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
  544. [ 2.179287] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  545. [ 2.180549] loop: module loaded
  546. [ 2.180819] ahci 0000:00:1f.2: version 3.0
  547. [ 2.180939] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
  548. [ 2.180966] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  549. [ 2.181032] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
  550. [ 2.181086] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
  551. [ 2.183978] scsi0 : ahci
  552. [ 2.185124] scsi1 : ahci
  553. [ 2.186292] scsi2 : ahci
  554. [ 2.187464] scsi3 : ahci
  555. [ 2.188623] scsi4 : ahci
  556. [ 2.189761] ata1: DUMMY
  557. [ 2.190805] ata2: DUMMY
  558. [ 2.191853] ata3: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b200 irq 45
  559. [ 2.192960] ata4: DUMMY
  560. [ 2.194075] ata5: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b300 irq 45
  561. [ 2.195586] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  562. [ 2.196731] e100: Copyright(c) 1999-2006 Intel Corporation
  563. [ 2.197934] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  564. [ 2.199140] e1000: Copyright (c) 1999-2006 Intel Corporation.
  565. [ 2.200426] sky2: driver version 1.30
  566. [ 2.201928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  567. [ 2.203219] ehci_hcd: block sizes: qh 136 qtd 96 itd 192 sitd 96
  568. [ 2.203222] ehci-pci: EHCI PCI platform driver
  569. [ 2.204639] ehci-pci 0000:00:1a.0: EHCI Host Controller
  570. [ 2.206052] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  571. [ 2.207432] ehci-pci 0000:00:1a.0: debug port 2
  572. [ 2.208778] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  573. [ 2.208782] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  574. [ 2.208797] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  575. [ 2.212684] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  576. [ 2.212686] ehci-pci 0000:00:1a.0: supports USB remote wakeup
  577. [ 2.212702] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb571d000
  578. [ 2.214029] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  579. [ 2.219188] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  580. [ 2.220520] usb usb1: default language 0x0409
  581. [ 2.220531] usb usb1: udev 1, busnum 1, minor = 0
  582. [ 2.220533] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  583. [ 2.221836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  584. [ 2.223129] usb usb1: Product: EHCI Host Controller
  585. [ 2.224409] usb usb1: Manufacturer: Linux 3.13.5 ehci_hcd
  586. [ 2.225678] usb usb1: SerialNumber: 0000:00:1a.0
  587. [ 2.227046] usb usb1: usb_probe_device
  588. [ 2.227049] usb usb1: configuration #1 chosen from 1 choice
  589. [ 2.227057] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  590. [ 2.227123] hub 1-0:1.0: usb_probe_interface
  591. [ 2.227125] hub 1-0:1.0: usb_probe_interface - got id
  592. [ 2.227127] hub 1-0:1.0: USB hub found
  593. [ 2.228374] hub 1-0:1.0: 2 ports detected
  594. [ 2.229604] hub 1-0:1.0: standalone hub
  595. [ 2.229606] hub 1-0:1.0: no power switching (usb 1.0)
  596. [ 2.229608] hub 1-0:1.0: individual port over-current protection
  597. [ 2.229610] hub 1-0:1.0: power on to power good time: 20ms
  598. [ 2.229617] hub 1-0:1.0: local power source is good
  599. [ 2.229666] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
  600. [ 2.229668] hub 1-0:1.0: trying to enable port power on non-switchable hub
  601. [ 2.229802] ehci-pci 0000:00:1d.0: EHCI Host Controller
  602. [ 2.231138] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  603. [ 2.232387] ehci-pci 0000:00:1d.0: debug port 2
  604. [ 2.233587] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  605. [ 2.233591] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  606. [ 2.233605] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  607. [ 2.237496] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  608. [ 2.237498] ehci-pci 0000:00:1d.0: supports USB remote wakeup
  609. [ 2.237511] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb571c000
  610. [ 2.238671] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  611. [ 2.244159] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  612. [ 2.245290] usb usb2: default language 0x0409
  613. [ 2.245300] usb usb2: udev 1, busnum 2, minor = 128
  614. [ 2.245302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  615. [ 2.246396] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  616. [ 2.247481] usb usb2: Product: EHCI Host Controller
  617. [ 2.248541] usb usb2: Manufacturer: Linux 3.13.5 ehci_hcd
  618. [ 2.249578] usb usb2: SerialNumber: 0000:00:1d.0
  619. [ 2.250759] usb usb2: usb_probe_device
  620. [ 2.250762] usb usb2: configuration #1 chosen from 1 choice
  621. [ 2.250769] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  622. [ 2.250852] hub 2-0:1.0: usb_probe_interface
  623. [ 2.250854] hub 2-0:1.0: usb_probe_interface - got id
  624. [ 2.250856] hub 2-0:1.0: USB hub found
  625. [ 2.251863] hub 2-0:1.0: 2 ports detected
  626. [ 2.252843] hub 2-0:1.0: standalone hub
  627. [ 2.252845] hub 2-0:1.0: no power switching (usb 1.0)
  628. [ 2.252846] hub 2-0:1.0: individual port over-current protection
  629. [ 2.252848] hub 2-0:1.0: power on to power good time: 20ms
  630. [ 2.252855] hub 2-0:1.0: local power source is good
  631. [ 2.252901] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
  632. [ 2.252903] hub 2-0:1.0: trying to enable port power on non-switchable hub
  633. [ 2.253007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  634. [ 2.254003] ohci_hcd: block sizes: ed 80 td 96
  635. [ 2.254007] ohci-pci: OHCI PCI platform driver
  636. [ 2.255074] uhci_hcd: USB Universal Host Controller Interface driver
  637. [ 2.256233] usbcore: registered new interface driver usblp
  638. [ 2.257366] usbcore: registered new interface driver usb-storage
  639. [ 2.258571] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  640. [ 2.274512] serio: i8042 KBD port at 0x60,0x64 irq 1
  641. [ 2.275611] serio: i8042 AUX port at 0x60,0x64 irq 12
  642. [ 2.276883] mousedev: PS/2 mouse device common for all mice
  643. [ 2.278524] usbcore: registered new interface driver synaptics_usb
  644. [ 2.279644] rtc_cmos 00:06: RTC can wake from S4
  645. [ 2.280437] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  646. [ 2.281082] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
  647. [ 2.281853] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
  648. [ 2.282522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  649. [ 2.283587] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  650. [ 2.284400] hidraw: raw HID events driver (C) Jiri Kosina
  651. [ 2.285063] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
  652. [ 2.285950] Switched to clocksource tsc
  653. [ 2.286409] usbcore: registered new interface driver usbhid
  654. [ 2.286409] usbhid: USB HID core driver
  655. [ 2.286738] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
  656. [ 2.286805] snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
  657. [ 2.289939] Too many HDMI devices
  658. [ 2.290628] Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
  659. [ 2.300341] Netfilter messages via NETLINK v0.30.
  660. [ 2.301049] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  661. [ 2.301833] ctnetlink v0.93: registering with nfnetlink.
  662. [ 2.302601] ip_tables: (C) 2000-2006 Netfilter Core Team
  663. [ 2.303323] TCP: cubic registered
  664. [ 2.304022] Initializing XFRM netlink socket
  665. [ 2.304877] NET: Registered protocol family 10
  666. [ 2.305702] ip6_tables: (C) 2000-2006 Netfilter Core Team
  667. [ 2.306438] sit: IPv6 over IPv4 tunneling driver
  668. [ 2.307281] NET: Registered protocol family 17
  669. [ 2.308001] Key type dns_resolver registered
  670. [ 2.309098] registered taskstats version 1
  671. [ 2.310182] Magic number: 15:214:638
  672. [ 2.310925] console [netcon0] enabled
  673. [ 2.311621] netconsole: network logging started
  674. [ 2.313376] PM: Hibernation image not present or could not be loaded.
  675. [ 2.313377] ALSA device list:
  676. [ 2.314068] #0: HDA Intel HDMI at 0xb5710000 irq 47
  677. [ 2.314762] #1: HDA Intel PCH at 0xb5714000 irq 46
  678. [ 2.329094] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  679. [ 2.329102] hub 1-0:1.0: port 1: status 0501 change 0001
  680. [ 2.352066] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  681. [ 2.352073] hub 2-0:1.0: port 1: status 0501 change 0001
  682. [ 2.429004] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  683. [ 2.429057] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  684. [ 2.480127] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
  685. [ 2.480132] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  686. [ 2.499903] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  687. [ 2.502251] ata3.00: ATAPI: HL-DT-ST DVDRAM GU70N, DE01, max UDMA/133
  688. [ 2.504872] ata3.00: configured for UDMA/133
  689. [ 2.506505] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GU70N DE01 PQ: 0 ANSI: 5
  690. [ 2.509270] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  691. [ 2.510000] cdrom: Uniform CD-ROM driver Revision: 3.20
  692. [ 2.511021] sr 2:0:0:0: Attached scsi CD-ROM sr0
  693. [ 2.511137] sr 2:0:0:0: Attached scsi generic sg0 type 5
  694. [ 2.530897] usb 1-1: new high-speed USB device number 2 using ehci-pci
  695. [ 2.582010] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
  696. [ 2.582014] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  697. [ 2.645114] usb 1-1: udev 2, busnum 1, minor = 1
  698. [ 2.645118] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
  699. [ 2.645859] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  700. [ 2.646837] usb 1-1: usb_probe_device
  701. [ 2.646840] usb 1-1: configuration #1 chosen from 1 choice
  702. [ 2.646993] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  703. [ 2.647063] hub 1-1:1.0: usb_probe_interface
  704. [ 2.647065] hub 1-1:1.0: usb_probe_interface - got id
  705. [ 2.647066] hub 1-1:1.0: USB hub found
  706. [ 2.647943] hub 1-1:1.0: 6 ports detected
  707. [ 2.648759] hub 1-1:1.0: standalone hub
  708. [ 2.648760] hub 1-1:1.0: individual port power switching
  709. [ 2.648761] hub 1-1:1.0: individual port over-current protection
  710. [ 2.648762] hub 1-1:1.0: Single TT
  711. [ 2.648764] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
  712. [ 2.648765] hub 1-1:1.0: power on to power good time: 0ms
  713. [ 2.648984] hub 1-1:1.0: local power source is good
  714. [ 2.649150] usb 1-1: usb port3's DeviceRemovable is changed to 1 according to platform information.
  715. [ 2.649152] hub 1-1:1.0: enabling power on all ports
  716. [ 2.649836] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
  717. [ 2.649844] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  718. [ 2.700999] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
  719. [ 2.701003] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  720. [ 2.749994] hub 1-1:1.0: port 3: status 0101 change 0001
  721. [ 2.751646] usb 2-1: new high-speed USB device number 2 using ehci-pci
  722. [ 2.802757] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
  723. [ 2.802762] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  724. [ 2.816542] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  725. [ 2.849499] usb 1-1: ep 81: reserve intr @ 8+64 (1.0+256) [1/0 us] mask 0001
  726. [ 2.849503] usb 1-1: link qh256-0001/ffff880254d4e240 start 1 [1/0 us]
  727. [ 2.865853] usb 2-1: udev 2, busnum 2, minor = 129
  728. [ 2.865857] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
  729. [ 2.866422] ata5.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
  730. [ 2.866424] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  731. [ 2.867987] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  732. [ 2.868838] usb 2-1: usb_probe_device
  733. [ 2.868841] usb 2-1: configuration #1 chosen from 1 choice
  734. [ 2.868985] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  735. [ 2.869123] hub 2-1:1.0: usb_probe_interface
  736. [ 2.869126] hub 2-1:1.0: usb_probe_interface - got id
  737. [ 2.869127] hub 2-1:1.0: USB hub found
  738. [ 2.869977] hub 2-1:1.0: 8 ports detected
  739. [ 2.870632] hub 2-1:1.0: standalone hub
  740. [ 2.870633] hub 2-1:1.0: individual port power switching
  741. [ 2.870635] hub 2-1:1.0: individual port over-current protection
  742. [ 2.870636] hub 2-1:1.0: Single TT
  743. [ 2.870637] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
  744. [ 2.870638] hub 2-1:1.0: power on to power good time: 0ms
  745. [ 2.870853] hub 2-1:1.0: local power source is good
  746. [ 2.871099] hub 2-1:1.0: enabling power on all ports
  747. [ 2.872080] hub 1-1:1.0: state 7 ports 6 chg 0008 evt 0000
  748. [ 2.872185] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
  749. [ 2.882591] hub 1-1:1.0: port 3 not reset yet, waiting 10ms
  750. [ 2.910804] ata5.00: configured for UDMA/133
  751. [ 2.911627] scsi 4:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
  752. [ 2.912650] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  753. [ 2.912808] sd 4:0:0:0: Attached scsi generic sg1 type 0
  754. [ 2.913997] sd 4:0:0:0: [sda] 4096-byte physical blocks
  755. [ 2.914674] sd 4:0:0:0: [sda] Write Protect is off
  756. [ 2.915318] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
  757. [ 2.915328] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  758. [ 2.917520] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  759. [ 2.918755] sd 4:0:0:0: [sda] Attached SCSI disk
  760. [ 2.944481] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
  761. [ 2.949877] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 2334, fw id: 1508589
  762. [ 2.956508] hub 1-1:1.0: port 3 not reset yet, waiting 10ms
  763. [ 2.971489] hub 2-1:1.0: port 1: status 0101 change 0001
  764. [ 2.971738] hub 2-1:1.0: port 2: status 0101 change 0001
  765. [ 2.971988] hub 2-1:1.0: port 3: status 0101 change 0001
  766. [ 3.007875] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
  767. [ 3.013224] md: Waiting for all devices to be available before autodetect
  768. [ 3.013970] md: If you don't use raid, use raid=noautodetect
  769. [ 3.014911] md: Autodetecting RAID arrays.
  770. [ 3.015652] md: Scanned 0 and added 0 devices.
  771. [ 3.016395] md: autorun ...
  772. [ 3.017120] md: ... autorun DONE.
  773. [ 3.018136] EXT4-fs (sda7): couldn't mount as ext3 due to feature incompatibilities
  774. [ 3.019117] EXT4-fs (sda7): couldn't mount as ext2 due to feature incompatibilities
  775. [ 3.029832] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  776. [ 3.030601] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
  777. [ 3.031919] Freeing unused kernel memory: 980K (ffffffff81cbc000 - ffffffff81db1000)
  778. [ 3.032258] usb 1-1.3: udev 3, busnum 1, minor = 2
  779. [ 3.032261] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc
  780. [ 3.032262] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  781. [ 3.034233] Write protecting the kernel read-only data: 12288k
  782. [ 3.036358] Freeing unused kernel memory: 708K (ffff88000174f000 - ffff880001800000)
  783. [ 3.039538] kworker/u16:0 (1124) used greatest stack depth: 5120 bytes left
  784. [ 3.039555] Freeing unused kernel memory: 1500K (ffff880001a89000 - ffff880001c00000)
  785. [ 3.039562] usb 1-1.3: usb_probe_device
  786. [ 3.039563] usb 1-1.3: configuration #1 chosen from 1 choice
  787. [ 3.039749] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
  788. [ 3.039843] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1)
  789. [ 3.039934] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0008
  790. [ 3.072208] usb 2-1: ep 81: reserve intr @ 8+64 (1.0+256) [1/0 us] mask 0001
  791. [ 3.072211] usb 2-1: link qh256-0001/ffff880254c7b000 start 1 [1/0 us]
  792. [ 3.072236] hub 2-1:1.0: state 7 ports 8 chg 000e evt 0000
  793. [ 3.072333] hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
  794. [ 3.083320] hub 2-1:1.0: port 1 not reset yet, waiting 10ms
  795. [ 3.145256] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
  796. [ 3.157237] hub 2-1:1.0: port 1 not reset yet, waiting 10ms
  797. [ 3.239769] usb 2-1.1: skipped 1 descriptor after configuration
  798. [ 3.239773] usb 2-1.1: skipped 5 descriptors after interface
  799. [ 3.239776] usb 2-1.1: skipped 1 descriptor after endpoint
  800. [ 3.239778] usb 2-1.1: skipped 17 descriptors after interface
  801. [ 3.239890] usb 2-1.1: default language 0x0409
  802. [ 3.240395] usb 2-1.1: udev 3, busnum 2, minor = 130
  803. [ 3.240399] usb 2-1.1: New USB device found, idVendor=5986, idProduct=029d
  804. [ 3.241249] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  805. [ 3.242110] usb 2-1.1: Product: Lenovo EasyCamera
  806. [ 3.243028] usb 2-1.1: Manufacturer: Vimicro Corp.
  807. [ 3.243903] usb 2-1.1: usb_probe_device
  808. [ 3.243906] usb 2-1.1: configuration #1 chosen from 1 choice
  809. [ 3.244021] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0)
  810. [ 3.244337] usb 2-1.1: adding 2-1.1:1.1 (config #1, interface 1)
  811. [ 3.244510] hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
  812. [ 3.255123] hub 2-1:1.0: port 2 not reset yet, waiting 10ms
  813. [ 3.316186] init-early.sh (1131) used greatest stack depth: 4952 bytes left
  814. [ 3.317059] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
  815. [ 3.393340] usb 2-1.2: default language 0x0409
  816. [ 3.393471] usb 2-1.2: udev 4, busnum 2, minor = 131
  817. [ 3.393474] usb 2-1.2: New USB device found, idVendor=1a40, idProduct=0101
  818. [ 3.394256] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  819. [ 3.395120] usb 2-1.2: Product: USB 2.0 Hub [MTT]
  820. [ 3.396010] usb 2-1.2: usb_probe_device
  821. [ 3.396012] usb 2-1.2: configuration #1 chosen from 1 choice
  822. [ 3.396092] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0)
  823. [ 3.396178] hub 2-1.2:1.0: usb_probe_interface
  824. [ 3.396179] hub 2-1.2:1.0: usb_probe_interface - got id
  825. [ 3.396180] hub 2-1.2:1.0: USB hub found
  826. [ 3.397085] hub 2-1.2:1.0: 4 ports detected
  827. [ 3.397831] hub 2-1.2:1.0: standalone hub
  828. [ 3.397832] hub 2-1.2:1.0: ganged power switching
  829. [ 3.397833] hub 2-1.2:1.0: global over-current protection
  830. [ 3.397965] hub 2-1.2:1.0: TT per port
  831. [ 3.397967] hub 2-1.2:1.0: TT requires at most 8 FS bit times (666 ns)
  832. [ 3.397968] hub 2-1.2:1.0: Port indicators are supported
  833. [ 3.397969] hub 2-1.2:1.0: power on to power good time: 100ms
  834. [ 3.398213] hub 2-1.2:1.0: local power source is good
  835. [ 3.398214] hub 2-1.2:1.0: no over-current condition exists
  836. [ 3.398229] hub 2-1.2:1.0: enabling power on all ports
  837. [ 3.398836] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
  838. [ 3.409991] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  839. [ 3.418715] random: nonblocking pool is initialized
  840. [ 3.471877] usb 2-1.3: new low-speed USB device number 5 using ehci-pci
  841. [ 3.483862] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  842. [ 3.498112] hub 2-1.2:1.0: port 3: status 0301 change 0001
  843. [ 3.559900] usb 2-1.3: skipped 1 descriptor after interface
  844. [ 3.560272] usb 2-1.3: default language 0x0409
  845. [ 3.561773] usb 2-1.3: udev 5, busnum 2, minor = 132
  846. [ 3.561775] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
  847. [ 3.562445] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  848. [ 3.563122] usb 2-1.3: Product: Optical Mouse
  849. [ 3.563798] usb 2-1.3: Manufacturer: Genius
  850. [ 3.564571] usb 2-1.3: usb_probe_device
  851. [ 3.564574] usb 2-1.3: configuration #1 chosen from 1 choice
  852. [ 3.566018] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
  853. [ 3.566098] usbhid 2-1.3:1.0: usb_probe_interface
  854. [ 3.566101] usbhid 2-1.3:1.0: usb_probe_interface - got id
  855. [ 3.568289] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
  856. [ 3.569258] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
  857. [ 3.570012] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0008
  858. [ 3.597640] usb 2-1.2: ep 81: reserve intr @ 16+64 (2.0+256) [1/0 us] mask 0001
  859. [ 3.597644] usb 2-1.2: link qh256-0001/ffff880255a16a80 start 2 [1/0 us]
  860. [ 3.597650] hub 2-1.2:1.0: state 7 ports 4 chg 0008 evt 0000
  861. [ 3.597732] hub 2-1.2:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
  862. [ 3.659662] usb 2-1.2.3: new low-speed USB device number 6 using ehci-pci
  863. [ 3.752194] usb 2-1.2.3: skipped 1 descriptor after interface
  864. [ 3.752199] usb 2-1.2.3: skipped 1 descriptor after interface
  865. [ 3.753688] usb 2-1.2.3: default language 0x0409
  866. [ 3.759558] usb 2-1.2.3: udev 6, busnum 2, minor = 133
  867. [ 3.759563] usb 2-1.2.3: New USB device found, idVendor=09da, idProduct=0260
  868. [ 3.760588] usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  869. [ 3.760591] usb 2-1.2.3: Product: USB Keyboard
  870. [ 3.760593] usb 2-1.2.3: Manufacturer:
  871. [ 3.760752] usb 2-1.2.3: usb_probe_device
  872. [ 3.760755] usb 2-1.2.3: configuration #1 chosen from 1 choice
  873. [ 3.761929] usb 2-1.2.3: adding 2-1.2.3:1.0 (config #1, interface 0)
  874. [ 3.762032] usbhid 2-1.2.3:1.0: usb_probe_interface
  875. [ 3.762033] usbhid 2-1.2.3:1.0: usb_probe_interface - got id
  876. [ 3.771844] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input9
  877. [ 3.772614] usb 2-1.2.3: ep 81: reserve intr @ 24+64 (3.0+8) [1/3 us] mask 0601
  878. [ 3.772617] usb 2-1.2.3: link qh8-0601/ffff8802554d76c0 start 3 [1/3 us]
  879. [ 3.772783] hid-generic 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1.2.3/input0
  880. [ 3.772795] usb 2-1.2.3: adding 2-1.2.3:1.1 (config #1, interface 1)
  881. [ 3.772829] usbhid 2-1.2.3:1.1: usb_probe_interface
  882. [ 3.772831] usbhid 2-1.2.3:1.1: usb_probe_interface - got id
  883. [ 3.791270] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.1/input/input10
  884. [ 3.792088] usb 2-1.2.3: ep 82: reserve intr @ 32+64 (4.0+8) [1/3 us] mask 0601
  885. [ 3.792091] usb 2-1.2.3: link qh8-0601/ffff880255a15540 start 4 [1/3 us]
  886. [ 3.792230] hid-generic 0003:09DA:0260.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1.2.3/input1
  887. [ 3.880553] sort (1297) used greatest stack depth: 4656 bytes left
  888. [ 3.936801] systemd-udevd[1322]: starting version 216
  889. [ 4.268702] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  890. [ 4.268713] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
  891. [ 4.268944] r8169 0000:08:00.0: irq 48 for MSI/MSI-X
  892. [ 4.269177] r8169 0000:08:00.0 eth0: RTL8106e at 0xffffc90000c32000, 28:d2:44:25:c9:4c, XID 04900000 IRQ 48
  893. [ 4.282908] systemd-udevd[1336]: renamed network interface eth0 to enp8s0
  894. [ 4.400643] cfg80211: Calling CRDA to update world regulatory domain
  895. [ 4.422458] Intel(R) Wireless WiFi driver for Linux, in-tree:
  896. [ 4.422460] Copyright(c) 2003-2013 Intel Corporation
  897. [ 4.422589] iwlwifi 0000:09:00.0: irq 49 for MSI/MSI-X
  898. [ 4.430325] iwlwifi 0000:09:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
  899. [ 4.676048] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
  900. [ 4.676100] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  901. [ 4.676328] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  902. [ 4.745004] cfg80211: World regulatory domain updated:
  903. [ 4.745006] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  904. [ 4.745008] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  905. [ 4.745009] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  906. [ 4.745010] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  907. [ 4.745011] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  908. [ 4.745012] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  909. [ 4.745014] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
  910. [ 4.745015] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  911. [ 4.745016] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  912. [ 4.868348] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
  913. [ 4.878227] systemd-udevd[1339]: renamed network interface wlan0 to wlp9s0
  914. [ 5.242084] nvidia: module license 'NVIDIA' taints kernel.
  915. [ 5.242087] Disabling lock debugging due to kernel taint
  916. [ 5.248959] nvidia 0000:07:00.0: enabling device (0006 -> 0007)
  917. [ 5.249366] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:07:00.0 on minor 1
  918. [ 5.249371] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 343.36 Mon Dec 1 16:18:58 PST 2014
  919. [ 5.278966] nvidia 0000:07:00.0: irq 50 for MSI/MSI-X
  920. [ 5.283207] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  921. [ 5.283240] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  922. [ 5.283257] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  923. [ 5.283284] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  924. [ 5.283299] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  925. [ 5.283314] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  926. [ 5.283347] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  927. [ 5.283362] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  928. [ 5.980291] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  929. [ 6.388252] nvidia-smi (1382) used greatest stack depth: 4192 bytes left
  930. [ 6.535067] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  931. [ 7.791070] EXT4-fs (sda7): re-mounted. Opts: (null)
  932. [ 7.798913] EXT4-fs (sda5): re-mounted. Opts: (null)
  933. [ 7.876437] Adding 8388604k swap on /dev/sda6. Priority:-1 extents:1 across:8388604k
  934. [ 9.417667] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  935. [ 9.417897] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  936. [ 9.429064] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
  937. [ 11.640327] type=1006 audit(1422542248.894:2): pid=2195 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
  938. [ 15.237673] r8169 0000:08:00.0 enp8s0: link down
  939. [ 15.237686] r8169 0000:08:00.0 enp8s0: link down
  940. [ 15.237701] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
  941. [ 16.804586] r8169 0000:08:00.0 enp8s0: link up
  942. [ 16.804591] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
  943. [ 17.272924] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  944. [ 17.273152] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
  945. [ 17.285390] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
  946. [ 17.484230] r8169 0000:08:00.0 enp8s0: link down
  947. [ 17.484246] r8169 0000:08:00.0 enp8s0: link down
  948. [ 17.484252] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
  949. [ 17.678104] r8169 0000:08:00.0 enp8s0: link down
  950. [ 17.678123] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
  951. [ 19.234495] r8169 0000:08:00.0 enp8s0: link up
  952. [ 19.234501] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
  953. [ 21.552935] type=1006 audit(1422542258.814:3): pid=2362 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
RAW Paste Data