Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- S.M.A.R.T data
- HD1
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.6-040906-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD40EFRX-68WT0N0
- Serial Number: WD-WCC4E0995832
- LU WWN Device Id: 5 0014ee 2b4734ad3
- Firmware Version: 80.00A80
- User Capacity: 4 000 787 030 016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Feb 10 08:58:12 2017 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (51540) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 515) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 178 176 021 Pre-fail Always - 8058
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 112
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 24385
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 112
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 111
- 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2886
- 194 Temperature_Celsius 0x0022 108 099 000 Old_age Always - 44
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 7007 -
- # 2 Short offline Completed without error 00% 6983 -
- # 3 Short offline Completed without error 00% 6959 -
- # 4 Short offline Completed without error 00% 6935 -
- # 5 Short offline Completed without error 00% 6911 -
- # 6 Extended offline Completed without error 00% 6898 -
- # 7 Short offline Completed without error 00% 6887 -
- # 8 Short offline Completed without error 00% 6863 -
- # 9 Short offline Completed without error 00% 6839 -
- #10 Short offline Completed without error 00% 6815 -
- #11 Short offline Completed without error 00% 6791 -
- #12 Short offline Completed without error 00% 6767 -
- #13 Short offline Completed without error 00% 6743 -
- #14 Extended offline Completed without error 00% 6730 -
- #15 Short offline Completed without error 00% 6719 -
- #16 Short offline Completed without error 00% 6696 -
- #17 Short offline Completed without error 00% 6672 -
- #18 Short offline Completed without error 00% 6648 -
- #19 Short offline Completed without error 00% 6624 -
- #20 Short offline Completed without error 00% 6600 -
- #21 Short offline Completed without error 00% 6576 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- -------------------------------------------------------------------------------
- HD2
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD40EFRX-68WT0N0
- Serial Number: WD-WCC4E0523582
- LU WWN Device Id: 5 0014ee 20984f686
- Firmware Version: 80.00A80
- User Capacity: 4 000 787 030 016 bytes [4,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Feb 10 08:57:33 2017 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (55740) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 557) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 182 179 021 Pre-fail Always - 7900
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 131
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 26478
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 131
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 130
- 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1302378
- 194 Temperature_Celsius 0x0022 109 098 000 Old_age Always - 43
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 9100 -
- # 2 Short offline Completed without error 00% 9076 -
- # 3 Short offline Completed without error 00% 9052 -
- # 4 Short offline Completed without error 00% 9028 -
- # 5 Short offline Completed without error 00% 9004 -
- # 6 Extended offline Completed without error 00% 8992 -
- # 7 Short offline Completed without error 00% 8981 -
- # 8 Short offline Completed without error 00% 8957 -
- # 9 Short offline Completed without error 00% 8933 -
- #10 Short offline Completed without error 00% 8909 -
- #11 Short offline Completed without error 00% 8885 -
- #12 Short offline Completed without error 00% 8861 -
- #13 Short offline Completed without error 00% 8837 -
- #14 Extended offline Completed without error 00% 8824 -
- #15 Short offline Completed without error 00% 8813 -
- #16 Short offline Completed without error 00% 8789 -
- #17 Short offline Completed without error 00% 8765 -
- #18 Short offline Completed without error 00% 8741 -
- #19 Short offline Completed without error 00% 8717 -
- #20 Short offline Completed without error 00% 8693 -
- #21 Short offline Completed without error 00% 8669 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment