Arduino G35 Color Effects CandyCane Pattern 2015

/*
  G35: An Arduino library for GE Color Effects G-35 holiday lights.
  Copyright © 2011 The G35 Authors. Use, modification, and distribution are
  subject to the BSD license as described in the accompanying LICENSE file.

  See README for complete attributions.
*/

#include <MyG35String.h>

// Total # of lights on string (usually 25 - 50). Maximum is 63, because
// the protocol uses 6-bit addressing and bulb #63 is reserved for broadcast
// messages.
#define LIGHT_COUNT (25)

// Arduino pin number. Pin 13 will blink the on-board LED.
#define G35_PIN (13)

G35String lights(G35_PIN, LIGHT_COUNT);

void setup() {
  lights.enumerate();
  lights.do_test_patterns();
  delay(1000);

  candycane();
  delay(5000);

  pileup();
  delay(5000);
}

void loop() {
  lights.fill_color(0, LIGHT_COUNT, G35::MAX_INTENSITY, COLOR_RED);
  delay(1000);

  lights.fill_color(0, LIGHT_COUNT, G35::MAX_INTENSITY, COLOR_GREEN);
  delay(1000);

  candycane();
  delay(5000);

  pileup();
  delay(5000);

  static uint16_t c;
  lights.fill_color(0, LIGHT_COUNT, G35::MAX_INTENSITY, G35::rainbow_color(c++));
  delay(1000);

}


void test_pattern() {
  // Tickle the ends. You should see three reds at the start, and three greens
  // at the end. This confirms that you've properly configured the strand
  // lengths and directions.
  uint8_t last_light = LIGHT_COUNT - 1;
  uint8_t BROADCAST_BULB = 63;
  uint8_t MAX_INTENSITY = 255;
  for (int i = 0; i < 8; ++i) {
    for (int j = 0; j < 3; ++j) {
      lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);
      lights.set_color(j, MAX_INTENSITY, COLOR_RED);
      lights.set_color(last_light - j, MAX_INTENSITY, COLOR_GREEN);
      delay(250);
    }
  }
}

void pileup() {
  // LEDs Converge on the center from both ends
  uint8_t last_light = LIGHT_COUNT - 1;
  uint8_t BROADCAST_BULB = 63;
  uint8_t MAX_INTENSITY = 255;

  for (int sequence = 0; sequence < 30; ++ sequence) {
    lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);
    for (int frame = 0; frame < last_light; ++frame) {
      lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);
      for (int j = 0; j < last_light / 2; ++j) {
        //        lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);
        lights.set_color(j, MAX_INTENSITY, COLOR_GREEN); // SET COLOR FROM BEGINNING;
        lights.set_color(last_light - j, MAX_INTENSITY, COLOR_RED); // SET COLOR FROM THE END;
        delay (100); // PAUSE BETWEEN ITEMS;
      }
      lights.set_color(last_light / 2, MAX_INTENSITY, COLOR_WHITE); // SET COLOR IN MIDDLE;
      delay(500); // PAUSE BETWEEN FRAMES;
    }
  } // COUNT NUMBER OF SEQUENCES;
}

void candycane() {
  // LED Movine Stripes
  uint8_t last_light = LIGHT_COUNT - 1;
  uint8_t BROADCAST_BULB = 63;
  uint8_t MAX_INTENSITY = 255;

  uint8_t numPixels = LIGHT_COUNT;
  int num_sets = 30;
  int Width = 4;
  int L = 0;

  for (int set = 0; set < num_sets; ++ set) {
    //    lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);// RESET ALL LEDs OFF

    for (int frame = 0; frame < last_light; ++frame) {
      //      lights.set_color(BROADCAST_BULB, 0, COLOR_BLACK);

      for (int i = 0; i < numPixels; i++) {
        L = numPixels - i - 1; // Which Pixel to Update;
        if ( ((frame + i) % ((Width * 2)) ) < (Width) ) {
          lights.set_color(L, MAX_INTENSITY, COLOR_RED); // SET PIXEL L COLOR TO RED
        } else {
          lights.set_color(L, MAX_INTENSITY, COLOR_GREEN); // SET PIXEL L COLOR TO WHITE
        }
        delay (10); // PAUSE BETWEEN ITEMS;
      }
      delay(10); // PAUSE BETWEEN FRAMES;    }
    }
  } // COUNT NUMBER OF SETS;
} // END FUNCTION CANDYCANE