Guest User

Untitled

a guest
Jun 26th, 2019
193
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.52 KB | None | 0 0
  1. U-Boot SPL 2019.07-rc4 (Jun 26 2019 - 18:51:15 +0200)
  2. DRAM: 2048 MiB
  3. Trying to boot from MMC1
  4. NOTICE: BL31: v2.1(release):2019.05-420-g86f275ef22
  5. NOTICE: BL31: Built : 18:47:40, Jun 26 2019
  6. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  7. NOTICE: BL31: Found U-Boot DTB at 0xc07e9c0, model: Beelink GS1
  8. NOTICE: PMIC: Probing AXP805
  9. NOTICE: PMIC: AXP805 detected
  10.  
  11.  
  12. U-Boot 2019.07-rc4 (Jun 26 2019 - 18:51:15 +0200) Allwinner Technology
  13.  
  14. CPU: Allwinner H6 (SUN50I)
  15. Model: Beelink GS1
  16. DRAM: 2 GiB
  17. MMC: mmc@4020000: 0, mmc@4022000: 1
  18. Loading Environment from FAT... Unable to use mmc 1:1... In: serial@5000000
  19. Out: serial@5000000
  20. Err: serial@5000000
  21. Net: No ethernet found.
  22. starting USB...
  23. Bus usb@5101000: USB EHCI 1.00
  24. Bus usb@5101400: USB OHCI 1.0
  25. scanning bus usb@5101000 for devices... 1 USB Device(s) found
  26. scanning bus usb@5101400 for devices... 1 USB Device(s) found
  27. scanning usb for storage devices... 0 Storage Device(s) found
  28. Hit any key to stop autoboot: 0
  29. switch to partitions #0, OK
  30. mmc0 is current device
  31. Scanning mmc 0:1...
  32. Found /extlinux/extlinux.conf
  33. Retrieving file: /extlinux/extlinux.conf
  34. 139 bytes read in 0 ms
  35. 1: linux
  36. Retrieving file: /Image
  37. 21008896 bytes read in 2106 ms (9.5 MiB/s)
  38. append: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
  39. Retrieving file: /sun50i-h6-beelink-gs1.dtb
  40. 15810 bytes read in 5 ms (3 MiB/s)
  41. ## Flattened Device Tree blob at 4fa00000
  42. Booting using the fdt blob at 0x4fa00000
  43. EHCI failed to shut down host controller.
  44. Loading Device Tree to 0000000049ff9000, end 0000000049fffdc1 ... OK
  45.  
  46. Starting kernel ...
  47.  
  48. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  49. [ 0.000000] Linux version 5.2.0-rc6 (clement@clement-Latitude-7490) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Wed Jun 26 23:47:41 CES9
  50. [ 0.000000] Machine model: Beelink GS1
  51. [ 0.000000] efi: Getting EFI parameters from FDT:
  52. [ 0.000000] efi: UEFI not found.
  53. [ 0.000000] cma: Reserved 32 MiB at 0x00000000be000000
  54. [ 0.000000] NUMA: No NUMA configuration found
  55. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
  56. [ 0.000000] NUMA: NODE_DATA [mem 0xbdbe5840-0xbdbe6fff]
  57. [ 0.000000] Zone ranges:
  58. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff]
  59. [ 0.000000] Normal empty
  60. [ 0.000000] Movable zone start for each node
  61. [ 0.000000] Early memory node ranges
  62. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
  63. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
  64. [ 0.000000] psci: probing for conduit method from DT.
  65. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  66. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  67. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  68. [ 0.000000] psci: SMC Calling Convention v1.1
  69. [ 0.000000] percpu: Embedded 23 pages/cpu s56728 r8192 d29288 u94208
  70. [ 0.000000] Detected VIPT I-cache on CPU0
  71. [ 0.000000] CPU features: detected: ARM erratum 845719
  72. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  73. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
  74. [ 0.000000] Policy zone: DMA32
  75. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
  76. [ 0.000000] Memory: 2005924K/2097152K available (11324K kernel code, 1764K rwdata, 5888K rodata, 1472K init, 446K bss, 58460K reserved, 32768K cma-reserved)
  77. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  78. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  79. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  80. [ 0.000000] Tasks RCU enabled.
  81. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  82. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  83. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  84. [ 0.000000] GIC: Using split EOI/Deactivate mode
  85. [ 0.000000] random: get_random_bytes called from start_kernel+0x2c0/0x468 with crng_init=0
  86. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  87. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  88. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  89. [ 0.000464] Console: colour dummy device 80x25
  90. [ 0.000543] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  91. [ 0.000555] pid_max: default: 32768 minimum: 301
  92. [ 0.000637] LSM: Security Framework initializing
  93. [ 0.001492] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  94. [ 0.001919] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  95. [ 0.001958] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  96. [ 0.001979] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  97. [ 0.002406] *** VALIDATE proc ***
  98. [ 0.002593] *** VALIDATE cgroup1 ***
  99. [ 0.002602] *** VALIDATE cgroup2 ***
  100. [ 0.024040] ASID allocator initialised with 32768 entries
  101. [ 0.032035] rcu: Hierarchical SRCU implementation.
  102. [ 0.041188] EFI services will not be available.
  103. [ 0.048068] smp: Bringing up secondary CPUs ...
  104. [ 0.080516] Detected VIPT I-cache on CPU1
  105. [ 0.080569] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  106. [ 0.112447] Detected VIPT I-cache on CPU2
  107. [ 0.112478] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  108. [ 0.144505] Detected VIPT I-cache on CPU3
  109. [ 0.144533] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  110. [ 0.144604] smp: Brought up 1 node, 4 CPUs
  111. [ 0.144623] SMP: Total of 4 processors activated.
  112. [ 0.144630] CPU features: detected: 32-bit EL0 Support
  113. [ 0.144637] CPU features: detected: CRC32 instructions
  114. [ 0.145094] CPU: All CPU(s) started at EL2
  115. [ 0.145114] alternatives: patching kernel code
  116. [ 0.146845] devtmpfs: initialized
  117. [ 0.150485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  118. [ 0.150514] futex hash table entries: 1024 (order: 4, 65536 bytes)
  119. [ 0.151865] pinctrl core: initialized pinctrl subsystem
  120. [ 0.152954] DMI not present or invalid.
  121. [ 0.153326] NET: Registered protocol family 16
  122. [ 0.153751] audit: initializing netlink subsys (disabled)
  123. [ 0.153938] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
  124. [ 0.154930] cpuidle: using governor menu
  125. [ 0.155180] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  126. [ 0.157552] DMA: preallocated 256 KiB pool for atomic allocations
  127. [ 0.158575] Serial: AMBA PL011 UART driver
  128. [ 0.174460] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  129. [ 0.174472] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  130. [ 0.174480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  131. [ 0.174488] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  132. [ 0.176430] cryptd: max_cpu_qlen set to 1000
  133. [ 0.179883] ACPI: Interpreter disabled.
  134. [ 0.181286] vgaarb: loaded
  135. [ 0.181543] SCSI subsystem initialized
  136. [ 0.181880] usbcore: registered new interface driver usbfs
  137. [ 0.181921] usbcore: registered new interface driver hub
  138. [ 0.181980] usbcore: registered new device driver usb
  139. [ 0.182554] pps_core: LinuxPPS API ver. 1 registered
  140. [ 0.182561] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  141. [ 0.182576] PTP clock support registered
  142. [ 0.182678] EDAC MC: Ver: 3.0.0
  143. [ 0.183562] FPGA manager framework
  144. [ 0.183640] Advanced Linux Sound Architecture Driver Initialized.
  145. [ 0.184291] clocksource: Switched to clocksource arch_sys_counter
  146. [ 0.184464] VFS: Disk quotas dquot_6.6.0
  147. [ 0.184525] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  148. [ 0.184570] *** VALIDATE hugetlbfs ***
  149. [ 0.184761] pnp: PnP ACPI: disabled
  150. [ 0.190678] NET: Registered protocol family 2
  151. [ 0.191066] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  152. [ 0.191139] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  153. [ 0.191324] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  154. [ 0.191600] TCP: Hash tables configured (established 16384 bind 16384)
  155. [ 0.191706] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  156. [ 0.191771] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  157. [ 0.191924] NET: Registered protocol family 1
  158. [ 0.192385] RPC: Registered named UNIX socket transport module.
  159. [ 0.192392] RPC: Registered udp transport module.
  160. [ 0.192398] RPC: Registered tcp transport module.
  161. [ 0.192403] RPC: Registered tcp NFSv4.1 backchannel transport module.
  162. [ 0.192415] PCI: CLS 0 bytes, default 64
  163. [ 0.193094] kvm [1]: IPA Size Limit: 40bits
  164. [ 0.193817] kvm [1]: vgic interrupt IRQ1
  165. [ 0.193931] kvm [1]: Hyp mode initialized successfully
  166. [ 0.199833] Initialise system trusted keyrings
  167. [ 0.199970] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  168. [ 0.206759] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  169. [ 0.207443] NFS: Registering the id_resolver key type
  170. [ 0.207468] Key type id_resolver registered
  171. [ 0.207474] Key type id_legacy registered
  172. [ 0.207487] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  173. [ 0.207649] 9p: Installing v9fs 9p2000 file system support
  174. [ 0.209139] Key type asymmetric registered
  175. [ 0.209148] Asymmetric key parser 'x509' registered
  176. [ 0.209182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  177. [ 0.209190] io scheduler mq-deadline registered
  178. [ 0.209196] io scheduler kyber registered
  179. [ 0.210642] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
  180. [ 0.211405] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
  181. [ 0.218072] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  182. [ 0.221198] EINJ: ACPI disabled.
  183. [ 0.233131] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  184. [ 0.235248] SuperH (H)SCI(F) driver initialized
  185. [ 0.235739] msm_serial: driver initialized
  186. [ 0.236629] cacheinfo: Unable to detect cache hierarchy for CPU 0
  187. [ 0.242893] loop: module loaded
  188. [ 0.246886] libphy: Fixed MDIO Bus: probed
  189. [ 0.247170] tun: Universal TUN/TAP device driver, 1.6
  190. [ 0.247871] thunder_xcv, ver 1.0
  191. [ 0.247909] thunder_bgx, ver 1.0
  192. [ 0.247948] nicpf, ver 1.0
  193. [ 0.248496] hclge is initializing
  194. [ 0.248503] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  195. [ 0.248509] hns3: Copyright (c) 2017 Huawei Corporation.
  196. [ 0.248571] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  197. [ 0.248576] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  198. [ 0.248613] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  199. [ 0.248619] igb: Copyright (c) 2007-2014 Intel Corporation.
  200. [ 0.248656] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  201. [ 0.248661] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  202. [ 0.248951] sky2: driver version 1.30
  203. [ 0.249549] VFIO - User Level meta-driver version: 0.3
  204. [ 0.250919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  205. [ 0.250926] ehci-pci: EHCI PCI platform driver
  206. [ 0.250959] ehci-platform: EHCI generic platform driver
  207. [ 0.251180] ehci-platform 5101000.usb: EHCI Host Controller
  208. [ 0.251203] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
  209. [ 0.251856] ehci-platform 5101000.usb: irq 22, io mem 0x05101000
  210. [ 0.264298] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  211. [ 0.264892] hub 1-0:1.0: USB hub found
  212. [ 0.264922] hub 1-0:1.0: 1 port detected
  213. [ 0.265261] ehci-orion: EHCI orion driver
  214. [ 0.265425] ehci-exynos: EHCI EXYNOS driver
  215. [ 0.265512] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  216. [ 0.265535] ohci-pci: OHCI PCI platform driver
  217. [ 0.265600] ohci-platform: OHCI generic platform driver
  218. [ 0.265789] ohci-platform 5101400.usb: Generic Platform OHCI controller
  219. [ 0.265809] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
  220. [ 0.266007] ohci-platform 5101400.usb: irq 23, io mem 0x05101400
  221. [ 0.328940] hub 2-0:1.0: USB hub found
  222. [ 0.328970] hub 2-0:1.0: 1 port detected
  223. [ 0.329295] ohci-exynos: OHCI EXYNOS driver
  224. [ 0.329828] usbcore: registered new interface driver usb-storage
  225. [ 0.332341] i2c /dev entries driver
  226. [ 0.332810] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator
  227. [ 0.333484] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  228. [ 0.338230] dcdca: supplied by vcc-5v
  229. [ 0.339274] dcdcc: supplied by vcc-5v
  230. [ 0.339863] dcdcd: supplied by vcc-5v
  231. [ 0.340314] vdd-sys: Bringing 900000uV into 960000-960000uV
  232. [ 0.340792] dcdce: supplied by vcc-5v
  233. [ 0.341360] aldo1: supplied by vcc-5v
  234. [ 0.341950] aldo2: supplied by vcc-5v
  235. [ 0.342395] vcc-ac200: Bringing 700000uV into 3300000-3300000uV
  236. [ 0.342854] aldo3: supplied by vcc-5v
  237. [ 0.343304] vcc25-dram: Bringing 700000uV into 3300000-3300000uV
  238. [ 0.344053] bldo1: supplied by vcc-5v
  239. [ 0.345044] bldo2: supplied by vcc-5v
  240. [ 0.345645] bldo3: supplied by vcc-5v
  241. [ 0.346092] vcc-dcxoio: Bringing 700000uV into 1800000-1800000uV
  242. [ 0.346836] bldo4: supplied by vcc-5v
  243. [ 0.347414] cldo1: supplied by vcc-5v
  244. [ 0.348017] cldo2: supplied by vcc-5v
  245. [ 0.348465] vcc-wifi-1: Bringing 700000uV into 3300000-3300000uV
  246. [ 0.348908] cldo3: supplied by vcc-5v
  247. [ 0.349359] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
  248. [ 0.349822] sw: supplied by regulator-dummy
  249. [ 0.349977] axp20x-i2c 0-0036: AXP20X driver loaded
  250. [ 0.354065] sdhci: Secure Digital Host Controller Interface driver
  251. [ 0.354073] sdhci: Copyright(c) Pierre Ossman
  252. [ 0.354436] Synopsys Designware Multimedia Card Interface Driver
  253. [ 0.355326] sdhci-pltfm: SDHCI platform and OF driver helper
  254. [ 0.356878] ledtrig-cpu: registered to indicate activity on CPUs
  255. [ 0.358046] usbcore: registered new interface driver usbhid
  256. [ 0.358052] usbhid: USB HID core driver
  257. [ 0.360911] NET: Registered protocol family 17
  258. [ 0.361083] 9pnet: Installing 9P2000 support
  259. [ 0.361138] Key type dns_resolver registered
  260. [ 0.361703] registered taskstats version 1
  261. [ 0.361709] Loading compiled-in X.509 certificates
  262. [ 0.378083] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  263. [ 0.378994] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
  264. [ 0.379465] printk: console [ttyS0] disabled
  265. [ 0.400404] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 15, base_baud = 1500000) is a 16550A
  266. [ 1.567875] printk: console [ttyS0] enabled
  267. [ 1.573752] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  268. [ 1.585003] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  269. [ 1.590763] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
  270. [ 1.599136] hub 3-0:1.0: USB hub found
  271. [ 1.602924] hub 3-0:1.0: 1 port detected
  272. [ 1.608750] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
  273. [ 1.619417] sunxi-mmc 4020000.mmc: Got CD GPIO
  274. [ 1.649262] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  275. [ 1.659842] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator
  276. [ 1.694094] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  277. [ 1.703323] hctosys: unable to open rtc device (rtc0)
  278. [ 1.708732] vdd-gpu: disabling
  279. [ 1.712111] ALSA device list:
  280. [ 1.714295] mmc0: host does not support reading read-only switch, assuming write-enable
  281. [ 1.715090] No soundcards found.
  282. [ 1.726808] Waiting for root device /dev/mmcblk0p2...
  283. [ 1.728489] mmc0: new high speed SDHC card at address aaaa
  284. [ 1.738449] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  285. [ 1.752102] mmcblk0: p1 p2
  286. [ 1.768932] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  287. [ 1.776257] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  288. [ 1.780646] random: fast init done
  289. [ 1.813515] mmc1: new DDR MMC card at address 0001
  290. [ 1.819218] EXT4-fs (mmcblk0p2): recovery complete
  291. [ 1.823420] mmcblk1: mmc1:0001 NCard 14.5 GiB
  292. [ 1.829282] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
  293. [ 1.829946] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  294. [ 1.832317] usb 1-1: new high-speed USB device number 2 using ehci-platform
  295. [ 1.835931] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
  296. [ 1.843357] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  297. [ 1.851438] mmcblk1: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
  298. [ 1.859423] devtmpfs: mounted
  299. [ 1.862972] mmcblk1: p1 size 25026560 extends beyond EOD, truncated
  300. [ 1.870771] Freeing unused kernel memory: 1472K
  301. [ 1.896342] Run /sbin/init as init process
  302. [ 1.990025] usb-storage 1-1:1.0: USB Mass Storage device detected
  303. [ 1.997167] scsi host0: usb-storage 1-1:1.0
  304. [ 2.029430] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  305. Starting syslogd: OK
  306. Starting klogd: OK
  307. Populating /dev using udev: [ 2.129315] udevd[201]: starting version 3.2.8
  308. [ 2.151544] random: udevd: uninitialized urandom read (16 bytes read)
  309. [ 2.161601] random: udevd: uninitialized urandom read (16 bytes read)
  310. [ 2.168095] random: udevd: uninitialized urandom read (16 bytes read)
  311. [ 2.189768] udevd[201]: specified group 'kvm' unknown
  312. [ 2.210607] udevd[202]: starting eudev-3.2.8
  313. [ 2.418220] sun4i-i2s 508f000.i2s: Could not register PCM
  314. [ 2.430180] sun4i-i2s 508f000.i2s: Could not register PCM
  315. [ 2.436602] sun4i-i2s 5090000.i2s: Could not register PCM
  316. [ 2.442420] sun4i-i2s 5091000.i2s: Could not register PCM
  317. [ 2.448771] sun4i-i2s 5092000.i2s: Could not register PCM
  318. [ 2.466875] sun4i-i2s 508f000.i2s: Could not register PCM
  319. [ 2.474359] sun4i-i2s 5090000.i2s: Could not register PCM
  320. [ 2.481776] sun4i-i2s 5091000.i2s: Could not register PCM
  321. [ 2.489671] sun4i-i2s 5092000.i2s: Could not register PCM
  322. [ 2.497330] sun4i-i2s 508f000.i2s: Could not register PCM
  323. [ 2.511295] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  324. [ 2.531051] sun4i-i2s 5090000.i2s: Could not register PCM
  325. [ 2.538426] sun4i-i2s 5091000.i2s: Could not register PCM
  326. [ 2.564440] sun4i-i2s 5092000.i2s: Could not register PCM
  327. [ 2.565540] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
  328. [ 2.571744] sun4i-i2s 508f000.i2s: Could not register PCM
  329. [ 2.578828] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops [sun8i_tcon_top])
  330. [ 2.593718] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
  331. [ 2.603141] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
  332. [ 2.612655] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  333. [ 2.623089] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  334. [ 2.631050] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0)
  335. [ 2.632250] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
  336. [ 2.640196] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  337. [ 2.649053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  338. [ 2.656312] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  339. [ 2.662884] [drm] No driver support for vblank timestamp query.
  340. [ 2.670154] dwmac-sun8i 5020000.ethernet: COE Type 2
  341. [ 2.677101] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  342. [ 2.681139] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  343. [ 2.695780] dwmac-sun8i 5020000.ethernet: Normal descriptors
  344. [ 2.701528] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  345. [ 2.707533] libphy: stmmac: probed
  346. [ 2.741885] Console: switching to colour frame buffer device 128x48
  347. [ 2.744442] sun4i-i2s 5090000.i2s: Could not register PCM
  348. [ 2.746687] sun4i-i2s 5091000.i2s: Could not register PCM
  349. [ 2.748995] sun4i-i2s 5092000.i2s: Could not register PCM
  350. [ 2.751630] sun4i-i2s 508f000.i2s: Could not register PCM
  351. [ 2.756652] sun4i-i2s 5090000.i2s: Could not register PCM
  352. [ 2.819545] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
  353. [ 2.862153] sun4i-i2s 5091000.i2s: Could not register PCM
  354. [ 2.869493] sun4i-i2s 5092000.i2s: Could not register PCM
  355. [ 2.876698] sun4i-i2s 508f000.i2s: Could not register PCM
  356. [ 2.885495] sun4i-i2s 5090000.i2s: Could not register PCM
  357. done
  358. Initializing random number generator... done.
  359. Starting network: [ 2.964444] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  360. [ 2.979016] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
  361. [ 2.986371] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
  362. [ 2.994093] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
  363. udhcpc: started, v1.31.0
  364. [ 3.013618] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
  365. [ 3.023608] sd 0:0:0:0: [sda] 30464000 512-byte logical blocks: (15.6 GB/14.5 GiB)
  366. [ 3.024488] sun4i-i2s 5091000.i2s: Could not register PCM
  367. [ 3.037612] sd 0:0:0:0: [sda] Write Protect is off
  368. [ 3.039258] sun4i-i2s 5092000.i2s: Could not register PCM
  369. [ 3.048838] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  370. [ 3.049846] sun4i-i2s 508f000.i2s: Could not register PCM
  371. [ 3.067064] sun4i-i2s 5090000.i2s: Could not register PCM
  372. [ 3.077821] sda: sda1
  373. [ 3.083815] sd 0:0:0:0: [sda] Attached SCSI removable disk
  374. udhcpc: sending discover
  375. udhcpc: sending discover
  376. [ 7.076851] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  377. udhcpc: sending discover
  378. udhcpc: sending select for 192.168.1.115
  379. udhcpc: lease of 192.168.1.115 obtained, lease time 43200
  380. deleting routers
  381. adding dns 1.1.1.1
  382. adding dns 1.0.0.1
  383. OK
  384. Starting dropbear sshd: [ 11.531866] urandom_read: 4 callbacks suppressed
  385. [ 11.531874] random: dropbear: uninitialized urandom read (32 bytes read)
  386. [ 11.599332] NET: Registered protocol family 10
  387. [ 11.605213] Segment Routing with IPv6
  388. OK
  389.  
  390. Welcome to Beelink GS1
  391. buildroot login:
Advertisement
Add Comment
Please, Sign In to add comment