[2018-08-22 18:39:15] [Output] : ★ Phil Smith reaches for a shovel as he begins to dick into the ground, throwing the soil next to the -
[2018-08-22 18:39:20] [Output] : ★ hole.      ((Phil Smith))
[2018-08-22 18:40:04] [Output] : ★ Phil Smith continues to dig the hole until he reaches a depth of about 3 or 4 feet.
[2018-08-22 18:40:51] [Output] : ★ Phil Smith reaches for a flat paver as he would drop it down at the bottom of the hole.
[2018-08-22 18:41:34] [Output] : ★ Phil Smith begins to draw a straight line onto the ground to indicate where the position of the
[2018-08-22 18:41:40] [Output] : ★ gate should be.      ((Phil Smith))
[2018-08-22 18:42:06] [Output] : ★ an orange straight line would be visible on the ground.      ((Phil Smith))
[2018-08-22 18:43:22] [Output] : ★ Phil Smith walks over to the position of the gate's operator as he begins to dig a square
[2018-08-22 18:43:27] [Output] : ★ hole there.      ((Phil Smith))
[2018-08-22 18:43:46] [Output] : ★ Phil Smith reaches for a square wooden mold which he places into the hole, as he squares it on
[2018-08-22 18:43:52] [Output] : ★ all edges.      ((Phil Smith))
[2018-08-22 18:44:23] [Output] : ★ a cement truck would appear as it approaches the hole, dropping some cement into the mold      ((Phil Smith))
[2018-08-22 18:44:37] [Output] : ★ in order to create a square concrete piece in the ground.      ((Phil Smith))
[2018-08-22 18:45:02] [Output] : ★ Phil Smith checks if the cement has dried and takes the mold out of the soil, leaving a square piece
[2018-08-22 18:45:06] [Output] : ★ of concrete behind.      ((Phil Smith))
[2018-08-22 18:46:21] [Output] : ★ Phil Smith reaches for a metal pole as he would use his metal saw to cut off the unnecessary part
[2018-08-22 18:46:24] [Output] : ★ of the pole.      ((Phil Smith))
[2018-08-22 18:46:39] [Output] : ★ Phil Smith lifts up the pole as he places it into the hole, in between the wooden mold.
[2018-08-22 18:47:39] [Output] : ★ Phil Smith reaches for a metal post as he would cut it in the required length using a metal saw.
[2018-08-22 18:47:57] [Output] : ★ Phil Smith lifts up the metal post as he would drop it into the hole he digged earlier, dropping it -
[2018-08-22 18:48:02] [Output] : ★ around 3 or 4 feet into the hole.      ((Phil Smith))
[2018-08-22 19:31:51] [Output] : ★ Phil Smith drives some stakes into the ground in order to level the metal post.
[2018-08-22 19:32:58] [Output] : ★ Phil Smith reaches for another metal post as he drops it on the other edge of teh hole, driving some -
[2018-08-22 19:33:04] [Output] : ★ stakes in the ground to level it out again.      ((Phil Smith))
[2018-08-22 19:33:41] [Output] : ★ Phil Smith reaches for the gate as he places it in between the two metal posts, attaching as he takes
[2018-08-22 19:34:05] [Output] : ★ a few wheels, installing them in the post in order to have the gate roll open and close      ((Phil Smith))
[2018-08-22 19:35:50] [Output] : ★ Phil Smith reaches for an electric rotating motor along with a wireless received as he would install it
[2018-08-22 19:35:55] [Output] : ★ at the backside of the metal post.      ((Phil Smith))
[2018-08-22 19:36:49] [Output] : ★ Phil Smith attaches the motor to the gate as he would install the motor onto the electric
[2018-08-22 19:36:58] [Output] : ★ installation of the building, turning it on.      ((Phil Smith))
[2018-08-22 19:37:10] [Output] : ★ Phil Smith reaches for the wireless remote of the gate as he would attempt to press the button
[2018-08-22 19:37:12] [Output] : ★ to open the gate.      ((Phil Smith))
[2018-08-22 19:38:08] [Output] : ★ the gate would open slowly, as Phil sighs.      ((Phil Smith))
[2018-08-22 19:38:29] [Output] : ★ Phil Smith reaches down for the motor as he would start to calibrate the motor in order for the
[2018-08-22 19:38:36] [Output] : ★ gate to open at the desired speed.      ((Phil Smith))