Guest User

Untitled

a guest
Mar 29th, 2021
77
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.57 KB | None | 0 0
  1. 1
  2. 2 ### No more available zram devices ()
  3. 3
  4. 4
  5. 5 ### No more available zram devices ()
  6. 6
  7. 7
  8. 8 Mon 29 Mar 2021 10:31:13 PM UTC | MicroZed | 21.05.0-trunk | armhf | armv7l | 5.4.0-zynq-zynq-g93dc4dbd1-dirty
  9. 9
  10. 10 ### dmesg:
  11. 11
  12. 12 [ 0.000714] pid_max: default: 32768 minimum: 301
  13. 13 [ 0.000924] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  14. 14 [ 0.000938] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  15. 15 [ 0.001689] CPU: Testing write buffer coherency: ok
  16. 16 [ 0.001725] CPU0: Spectre v2: using BPIALL workaround
  17. 17 [ 0.001962] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  18. 18 [ 0.060238] Setting up static identity map for 0x100000 - 0x100060
  19. 19 [ 0.080188] rcu: Hierarchical SRCU implementation.
  20. 20 [ 0.120186] smp: Bringing up secondary CPUs ...
  21. 21 [ 0.200579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  22. 22 [ 0.200588] CPU1: Spectre v2: using BPIALL workaround
  23. 23 [ 0.200733] smp: Brought up 1 node, 2 CPUs
  24. 24 [ 0.200744] SMP: Total of 2 processors activated (1333.33 BogoMIPS).
  25. 25 [ 0.200750] CPU: All CPU(s) started in SVC mode.
  26. 26 [ 0.201331] devtmpfs: initialized
  27. 27 [ 0.204844] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  28. 28 [ 0.205251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  29. 29 [ 0.205271] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  30. 30 [ 0.206450] pinctrl core: initialized pinctrl subsystem
  31. 31 [ 0.207384] NET: Registered protocol family 16
  32. 32 [ 0.209622] DMA: preallocated 256 KiB pool for atomic coherent allocations
  33. 33 [ 0.220232] cpuidle: using governor menu
  34. 34 [ 0.228034] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  35. 35 [ 0.228043] hw-breakpoint: maximum watchpoint size is 4 bytes.
  36. 36 [ 0.228186] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
  37. 37 [ 0.228793] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 24, base_baud = 3125000) is a xuartps
  38. 38 [ 0.228880] printk: console [ttyPS0] enabled
  39. 39 [ 0.238998] vgaarb: loaded
  40. 40 [ 0.239382] SCSI subsystem initialized
  41. 41 [ 0.239625] usbcore: registered new interface driver usbfs
  42. 42 [ 0.239681] usbcore: registered new interface driver hub
  43. 43 [ 0.239753] usbcore: registered new device driver usb
  44. 44 [ 0.239939] usb_phy_generic phy0: phy0 supply vcc not found, using dummy regulator
  45. 45 [ 0.240140] mc: Linux media interface: v0.10
  46. 46 [ 0.240236] videodev: Linux video capture interface: v2.00
  47. 47 [ 0.240277] pps_core: LinuxPPS API ver. 1 registered
  48. 48 [ 0.240284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  49. 49 [ 0.240305] PTP clock support registered
  50. 50 [ 0.240341] EDAC MC: Ver: 3.0.0
  51. 51 [ 0.240814] FPGA manager framework
  52. 52 [ 0.241055] Advanced Linux Sound Architecture Driver Initialized.
  53. 53 [ 0.242033] clocksource: Switched to clocksource arm_global_timer
  54. 54 [ 0.252025] thermal_sys: Registered thermal governor 'step_wise'
  55. 55 [ 0.252340] NET: Registered protocol family 2
  56. 56 [ 0.253006] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  57. 57 [ 0.253042] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  58. 58 [ 0.253131] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  59. 59 [ 0.253280] TCP: Hash tables configured (established 8192 bind 8192)
  60. 60 [ 0.253380] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  61. 61 [ 0.253433] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  62. 62 [ 0.253658] NET: Registered protocol family 1
  63. 63 [ 0.254231] RPC: Registered named UNIX socket transport module.
  64. 64 [ 0.254238] RPC: Registered udp transport module.
  65. 65 [ 0.254243] RPC: Registered tcp transport module.
  66. 66 [ 0.254248] RPC: Registered tcp NFSv4.1 backchannel transport module.
  67. 67 [ 0.254262] PCI: CLS 0 bytes, default 64
  68. 68 [ 0.254500] Trying to unpack rootfs image as initramfs...
  69. 69 [ 0.644832] Freeing initrd memory: 5660K
  70. 70 [ 0.645279] hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
  71. 71 [ 0.645533] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  72. 72 [ 0.647000] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  73. 73 [ 0.647965] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  74. 74 [ 0.648225] bounce: pool size: 64 pages
  75. 75 [ 0.648244] io scheduler mq-deadline registered
  76. 76 [ 0.648250] io scheduler kyber registered
  77. 77 [ 0.648565] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
  78. 78 [ 0.651235] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
  79. 79 [ 0.651250] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  80. 80 [ 0.661186] brd: module loaded
  81. 81 [ 0.667312] loop: module loaded
  82. 82 [ 0.668523] libphy: Fixed MDIO Bus: probed
  83. 83 [ 0.669521] CAN device driver interface
  84. 84 [ 0.670010] macb e000b000.ethernet: invalid hw address, using random
  85. 85 [ 0.670848] libphy: MACB_mii_bus: probed
  86. 86 [ 0.750225] Marvell 88E1510 e000b000.ethernet-ffffffff:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=e000b000.ethernet-ffffffff:00, irq=POLL)
  87. 87 [ 0.750247] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 25 (0a:9a:3d:fe:11:ee)
  88. 88 [ 0.750490] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  89. 89 [ 0.750495] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  90. 90 [ 0.751170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  91. 91 [ 0.751176] ehci-pci: EHCI PCI platform driver
  92. 92 [ 0.751277] usbcore: registered new interface driver usb-storage
  93. 93 [ 0.751747] chipidea-usb2 e0002000.usb: e0002000.usb supply vbus not found, using dummy regulator
  94. 94 [ 0.760900] ci_hdrc ci_hdrc.0: EHCI Host Controller
  95. 95 [ 0.760937] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
  96. 96 [ 0.790605] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  97. 97 [ 0.791455] hub 1-0:1.0: USB hub found
  98. 98 [ 0.791500] hub 1-0:1.0: 1 port detected
  99. 99 [ 0.793199] i2c /dev entries driver
  100. 100 [ 0.794727] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
  101. 101 [ 0.795007] EDAC MC: ECC not enabled
  102. 102 [ 0.795156] Xilinx Zynq CpuIdle Driver started
  103. 103 [ 0.795576] sdhci: Secure Digital Host Controller Interface driver
  104. 104 [ 0.795582] sdhci: Copyright(c) Pierre Ossman
  105. 105 [ 0.795587] sdhci-pltfm: SDHCI platform and OF driver helper
  106. 106 [ 0.830230] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
  107. 107 [ 0.830625] ledtrig-cpu: registered to indicate activity on CPUs
  108. 108 [ 0.830838] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  109. 109 [ 0.830920] timer #0 at (ptrval), irq=38
  110. 110 [ 0.831339] usbcore: registered new interface driver usbhid
  111. 111 [ 0.831345] usbhid: USB HID core driver
  112. 112 [ 0.833187] fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
  113. 113 [ 0.834622] NET: Registered protocol family 10
  114. 114 [ 0.835804] Segment Routing with IPv6
  115. 115 [ 0.835902] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  116. 116 [ 0.836617] NET: Registered protocol family 17
  117. 117 [ 0.836635] can: controller area network core (rev 20170425 abi 9)
  118. 118 [ 0.836698] NET: Registered protocol family 29
  119. 119 [ 0.836707] can: raw protocol (rev 20170425)
  120. 120 [ 0.836714] can: broadcast manager protocol (rev 20170425 t)
  121. 121 [ 0.836726] can: netlink gateway (rev 20190810) max_hops=1
  122. 122 [ 0.837134] Registering SWP/SWPB emulation handler
  123. 123 [ 0.837572] of-fpga-region fpga-full: FPGA Region probed
  124. 124 [ 0.837810] hctosys: unable to open rtc device (rtc0)
  125. 125 [ 0.837817] of_cfs_init
  126. 126 [ 0.837902] of_cfs_init: OK
  127. 127 [ 0.838175] ALSA device list:
  128. 128 [ 0.838183] No soundcards found.
  129. 129 [ 0.841680] Freeing unused kernel memory: 1024K
  130. 130 [ 0.862327] Run /init as init process
  131. 131 [ 0.871333] mmc0: new high speed SDXC card at address 0001
  132. 132 [ 0.871996] mmcblk0: mmc0:0001 EE8QT 239 GiB
  133. 133 [ 0.874104] mmcblk0: p1 p2
  134. 134 [ 1.502617] random: fast init done
  135. 135 [ 231.361628] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: (null)
  136. 136 [ 232.406398] systemd[1]: System time before build time, advancing clock.
  137. 137 [ 232.408728] systemd[1]: Failed to find module 'autofs4'
  138. 138 [ 232.454460] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  139. 139 [ 232.455119] systemd[1]: Detected architecture arm.
  140. 140 [ 232.513141] systemd[1]: Set hostname to <microzed>.
  141. 141 [ 233.141280] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
  142. 142 [ 233.634023] random: systemd: uninitialized urandom read (16 bytes read)
  143. 143 [ 233.634310] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  144. 144 [ 233.634334] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  145. 145 [ 233.635473] systemd[1]: Created slice system-modprobe.slice.
  146. 146 [ 233.662248] random: systemd: uninitialized urandom read (16 bytes read)
  147. 147 [ 233.662977] systemd[1]: Created slice system-serial\x2dgetty.slice.
  148. 148 [ 233.692216] random: systemd: uninitialized urandom read (16 bytes read)
  149. 149 [ 233.692793] systemd[1]: Created slice User and Session Slice.
  150. 150 [ 233.722267] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
  151. 151 [ 233.722753] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  152. 152 [ 233.752377] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  153. 153 [ 233.752684] systemd[1]: Reached target Local Encrypted Volumes.
  154. 154 [ 233.782582] systemd[1]: Reached target Remote File Systems.
  155. 155 [ 233.812267] systemd[1]: Reached target Slices.
  156. 156 [ 233.842340] systemd[1]: Reached target Swap.
  157. 157 [ 233.872287] systemd[1]: Reached target System Time Set.
  158. 158 [ 233.902942] systemd[1]: Listening on Syslog Socket.
  159. 159 [ 233.932867] systemd[1]: Listening on fsck to fsckd communication Socket.
  160. 160 [ 233.962623] systemd[1]: Listening on initctl Compatibility Named Pipe.
  161. 161 [ 234.001546] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  162. 162 [ 234.002517] systemd[1]: Listening on Journal Socket (/dev/log).
  163. 163 [ 234.043065] systemd[1]: Listening on Journal Socket.
  164. 164 [ 234.073000] systemd[1]: Listening on udev Control Socket.
  165. 165 [ 234.102811] systemd[1]: Listening on udev Kernel Socket.
  166. 166 [ 234.132830] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  167. 167 [ 234.133357] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
  168. 168 [ 234.133935] systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
  169. 169 [ 234.134428] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  170. 170 [ 234.140112] systemd[1]: Starting Restore / save the current clock...
  171. 171 [ 234.176305] systemd[1]: Starting Set the console keyboard layout...
  172. 172 [ 234.212701] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  173. 173 [ 234.213052] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  174. 174 [ 234.217238] systemd[1]: Started Nameserver information manager.
  175. 175 [ 234.262952] systemd[1]: Reached target Network (Pre).
  176. 176 [ 234.295256] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  177. 177 [ 234.295496] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  178. 178 [ 234.302475] systemd[1]: Starting Load Kernel Modules...
  179. 179 [ 234.335750] systemd[1]: Starting Remount Root and Kernel File Systems...
  180. 180 [ 234.366925] systemd[1]: Starting udev Coldplug all Devices...
  181. 181 [ 234.402288] systemd[1]: Finished Restore / save the current clock.
  182. 182 [ 234.436270] systemd[1]: Finished Load Kernel Modules.
  183. 183 [ 234.436542] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
  184. 184 [ 234.482821] systemd[1]: Finished Remount Root and Kernel File Systems.
  185. 185 [ 234.513983] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  186. 186 [ 234.517705] systemd[1]: Mounting Kernel Configuration File System...
  187. 187 [ 234.554858] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  188. 188 [ 234.555171] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  189. 189 [ 234.558748] systemd[1]: Starting Load/Save Random Seed...
  190. 190 [ 234.585922] systemd[1]: Starting Apply Kernel Variables...
  191. 191 [ 234.615942] systemd[1]: Starting Create System Users...
  192. 192 [ 234.664544] systemd[1]: Mounted Kernel Configuration File System.
  193. 193 [ 234.694731] systemd[1]: Finished Apply Kernel Variables.
  194. 194 [ 234.736307] systemd[1]: Finished Create System Users.
  195. 195 [ 234.766436] systemd[1]: Starting Create Static Device Nodes in /dev...
  196. 196 [ 234.804166] systemd[1]: Finished Set the console keyboard layout.
  197. 197 [ 234.850653] systemd[1]: Finished Create Static Device Nodes in /dev.
  198. 198 [ 234.883012] systemd[1]: Reached target Local File Systems (Pre).
  199. 199 [ 234.916565] systemd[1]: Mounting /tmp...
  200. 200 [ 234.955836] systemd[1]: Starting udev Kernel Device Manager...
  201. 201 [ 234.970360] systemd[171]: systemd-udevd.service: ProtectHostname=yes is configured, but the kernel does not support UTS namespaces, ignoring namespace setup.
  202. 202 [ 234.988531] systemd[1]: Finished udev Coldplug all Devices.
  203. 203 [ 235.023547] systemd[1]: Mounted /tmp.
  204. 204 [ 235.057838] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  205. 205 [ 235.086983] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  206. 206 [ 235.138198] systemd[1]: Started udev Kernel Device Manager.
  207. 207 [ 235.495473] systemd[1]: Found device /dev/ttyPS0.
  208. 208 [ 236.084699] systemd[1]: Found device /dev/disk/by-uuid/5ACB-E525.
  209. 209 [ 236.164796] systemd[1]: Mounting /boot...
  210. 210 [ 236.190660] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  211. 211 [ 236.200501] systemd[1]: Mounted /boot.
  212. 212 [ 236.222872] systemd[1]: Reached target Local File Systems.
  213. 213 [ 236.255834] systemd[1]: Starting Armbian ZRAM config...
  214. 214 [ 236.286471] systemd[1]: Starting Set console font and keymap...
  215. 215 [ 236.317454] systemd[1]: Starting Raise network interfaces...
  216. 216 [ 236.342484] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  217. 217 [ 236.349052] systemd[1]: Finished Set console font and keymap.
  218. 218 [ 236.769600] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
  219. 219 [ 236.770535] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
  220. 220 [ 236.771577] systemd[1]: Failed to start Armbian ZRAM config.
  221. 221 [ 236.836509] systemd[1]: Starting Armbian memory supported logging...
  222. 222 [ 236.874105] systemd[1]: Finished Raise network interfaces.
  223. 223 [ 238.122091] random: crng init done
  224. 224 [ 238.122105] random: 7 urandom warning(s) missed due to ratelimiting
  225. 225 [ 238.136028] systemd[1]: Finished Load/Save Random Seed.
  226. 226 [ 238.172950] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  227. 227 [ 241.740803] systemd[1]: Finished Armbian memory supported logging.
  228. 228 [ 241.776894] systemd[1]: Starting Journal Service...
  229. 229 [ 241.864231] systemd[1]: Started Journal Service.
  230. 230 [ 241.940757] systemd-journald[306]: Received client request to flush runtime journal.
  231. 231
  232. 232 ### armbian-release:
  233. 233
  234. 234 # PLEASE DO NOT EDIT THIS FILE
  235. 235 BOARD=microzed
  236. 236 BOARD_NAME="MicroZed"
  237. 237 BOARDFAMILY=zynq
  238. 238 BUILD_REPOSITORY_URL=git@github.com:tparys/build.git
  239. 239 BUILD_REPOSITORY_COMMIT=3ab0a9997-dirty
  240. 240 DISTRIBUTION_CODENAME=focal
  241. 241 DISTRIBUTION_STATUS=supported
  242. 242 VERSION=21.05.0-trunk
  243. 243 LINUXFAMILY=zynq
  244. 244 BRANCH=legacy
  245. 245 ARCH=arm
  246. 246 IMAGE_TYPE=user-built
  247. 247 BOARD_TYPE=wip
  248. 248 INITRD_ARCH=arm
  249. 249 KERNEL_IMAGE_TYPE=Image
  250. 250
  251. 251 ### boot environment:
  252. 252
  253. 253 verbosity=1
  254. 254 fdtfile=zynq-microzed.dtb
  255. 255 overlay_prefix=zynq
  256. 256 rootdev=/dev/mmcblk0p2
  257. 257 rootfstype=ext4
  258. 258 extraargs=break=premount
  259. 259
  260. 260
  261. 261 ### lsusb:
  262. 262
  263. 263 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  264. 264
  265. 265 ### lscpu:
  266. 266
  267. 267 Architecture: armv7l
  268. 268 Byte Order: Little Endian
  269. 269 CPU(s): 2
  270. 270 On-line CPU(s) list: 0,1
  271. 271 Thread(s) per core: 1
  272. 272 Core(s) per socket: 2
  273. 273 Socket(s): 1
  274. 274 Vendor ID: ARM
  275. 275 Model: 0
  276. 276 Model name: Cortex-A9
  277. 277 Stepping: r3p0
  278. 278 BogoMIPS: 666.66
  279. 279 Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
  280. 280
  281. 281 ### cpuinfo:
  282. 282
  283. 283 processor : 0
  284. 284 model name : ARMv7 Processor rev 0 (v7l)
  285. 285 BogoMIPS : 666.66
  286. 286 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
  287. 287 CPU implementer : 0x41
  288. 288 CPU architecture: 7
  289. 289 CPU variant : 0x3
  290. 290 CPU part : 0xc09
  291. 291 CPU revision : 0
  292. 292
  293. 293 processor : 1
  294. 294 model name : ARMv7 Processor rev 0 (v7l)
  295. 295 BogoMIPS : 666.66
  296. 296 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
  297. 297 CPU implementer : 0x41
  298. 298 CPU architecture: 7
  299. 299 CPU variant : 0x3
  300. 300 CPU part : 0xc09
  301. 301 CPU revision : 0
  302. 302
  303. 303 Hardware : Xilinx Zynq Platform
  304. 304 Revision : 0003
  305. 305 Serial : 0000000000000000
  306. 306
  307. 307 ### meminfo:
  308. 308
  309. 309 MemTotal: 1030384 kB
  310. 310 MemFree: 979764 kB
  311. 311 MemAvailable: 990528 kB
  312. 312 Buffers: 5440 kB
  313. 313 Cached: 24876 kB
  314. 314 SwapCached: 0 kB
  315. 315 Active: 24444 kB
  316. 316 Inactive: 12960 kB
  317. 317 Active(anon): 7256 kB
  318. 318 Inactive(anon): 1964 kB
  319. 319 Active(file): 17188 kB
  320. 320 Inactive(file): 10996 kB
  321. 321 Unevictable: 0 kB
  322. 322 Mlocked: 0 kB
  323. 323 HighTotal: 262144 kB
  324. 324 HighFree: 228588 kB
  325. 325 LowTotal: 768240 kB
  326. 326 LowFree: 751176 kB
  327. 327 SwapTotal: 0 kB
  328. 328 SwapFree: 0 kB
  329. 329 Dirty: 0 kB
  330. 330 Writeback: 0 kB
  331. 331 AnonPages: 7132 kB
  332. 332 Mapped: 9968 kB
  333. 333 Shmem: 2088 kB
  334. 334 KReclaimable: 2596 kB
  335. 335 Slab: 7316 kB
  336. 336 SReclaimable: 2596 kB
  337. 337 SUnreclaim: 4720 kB
  338. 338 KernelStack: 528 kB
  339. 339 PageTables: 288 kB
  340. 340 NFS_Unstable: 0 kB
  341. 341 Bounce: 0 kB
  342. 342 WritebackTmp: 0 kB
  343. 343 CommitLimit: 515192 kB
  344. 344 Committed_AS: 13668 kB
  345. 345 VmallocTotal: 245760 kB
  346. 346 VmallocUsed: 328 kB
  347. 347 VmallocChunk: 0 kB
  348. 348 Percpu: 208 kB
  349. 349 CmaTotal: 16384 kB
  350. 350 CmaFree: 16108 kB
  351. 351
  352. 352 ### virtual memory:
  353. 353
  354. 354 vm.admin_reserve_kbytes = 8192
  355. 355 Mon 29 Mar 2021 10:31:13 PM UTC | MicroZed | 21.05.0-trunk | armhf | armv7l | 5.4.0-zynq-zynq-g93dc4dbd1-dirty
  356. 356 vm.block_dump = 0
  357. 357 vm.dirty_background_bytes = 0
  358. 358 vm.dirty_background_ratio = 10
  359. 359 vm.dirty_bytes = 0
  360. 360 vm.dirty_expire_centisecs = 3000
  361. 361 vm.dirty_ratio = 20
  362. 362 vm.dirtytime_expire_seconds = 43200
  363. 363 vm.dirty_writeback_centisecs = 500
  364. 364 vm.drop_caches = 0
  365. 365 vm.highmem_is_dirtyable = 0
  366. 366 vm.laptop_mode = 0
  367. 367 vm.legacy_va_layout = 0
  368. 368 vm.lowmem_reserve_ratio = 32 0 0
  369. 369 vm.max_map_count = 65530
  370. 370 vm.min_free_kbytes = 3490
  371. 371 vm.mmap_min_addr = 32768
  372. 372 vm.mmap_rnd_bits = 8
  373. 373 vm.oom_dump_tasks = 1
  374. 374 vm.oom_kill_allocating_task = 0
  375. 375 vm.overcommit_kbytes = 0
  376. 376 vm.overcommit_memory = 0
  377. 377 vm.overcommit_ratio = 50
  378. 378 vm.page-cluster = 3
  379. 379 vm.panic_on_oom = 0
  380. 380 vm.percpu_pagelist_fraction = 0
  381. 381 vm.stat_interval = 1
  382. 382 vm.swappiness = 100
  383. 383 vm.user_reserve_kbytes = 31926
  384. 384 vm.vfs_cache_pressure = 100
  385. 385 vm.watermark_boost_factor = 15000
  386. 386 vm.watermark_scale_factor = 10
  387. 387
  388. 388 ### ip addr:
  389. 389
  390. 390
  391. 391 ### [resize2fs] Leaving 1% spare area. Start resizing partition /dev/mmcblk0p2 now:
  392. 392
  393. 393 major minor #blocks name
  394. 394
  395. 395 1 0 16384 ram0
  396. 396 1 1 16384 ram1
  397. 397 1 2 16384 ram2
  398. 398 1 3 16384 ram3
  399. 399 1 4 16384 ram4
  400. 400 1 5 16384 ram5
  401. 401 1 6 16384 ram6
  402. 402 1 7 16384 ram7
  403. 403 1 8 16384 ram8
  404. 404 1 9 16384 ram9
  405. 405 1 10 16384 ram10
  406. 406 1 11 16384 ram11
  407. 407 1 12 16384 ram12
  408. 408 1 13 16384 ram13
  409. 409 1 14 16384 ram14
  410. 410 1 15 16384 ram15
  411. 411 179 0 250085376 mmcblk0
  412. 412 179 1 131072 mmcblk0p1
  413. 413 179 2 247449344 mmcblk0p2
  414. 414
  415. 415 Executing fdisk, fsck and partprobe:
  416. 416 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  417. 417 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  418. 418 inet XXX.XXX.0.1/8 scope host lo
  419. 419 valid_lft forever preferred_lft forever
  420. 420 inet6 ::1/128 scope host
  421. 421 valid_lft forever preferred_lft forever
  422. 422 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  423. 423 link/ether 0a:9a:3d:fe:11:ee brd ff:ff:ff:ff:ff:ff
  424. 424 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
  425. 425 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0
  426. 426
  427. 427 ### partitions:
  428. 428
  429. 429 major minor #blocks name
  430. 430
  431. 431 179 0 250085376 mmcblk0
  432. 432 179 1 131072 mmcblk0p1
  433. 433 179 2 247449344 mmcblk0p2
  434. 434
  435. 435 ### df:
  436. 436
  437. 437 udev 492M 0 492M 0% /dev
  438. 438 tmpfs 101M 1.7M 100M 2% /run
  439. 439 /dev/mmcblk0p2 177G 469M 175G 1% /
  440. 440 tmpfs 504M 0 504M 0% /dev/shm
  441. 441 tmpfs 5.0M 0 5.0M 0% /run/lock
  442. 442 tmpfs 504M 0 504M 0% /sys/fs/cgroup
  443. 443 tmpfs 504M 4.0K 504M 1% /tmp
  444. 444 /dev/mmcblk0p1 128M 24M 104M 19% /boot
  445. 445
  446. 446 ### lsblk:
  447. 447
  448. 448
  449. 449 Welcome to fdisk (util-linux 2.34).
  450. 450 Changes will remain in memory only, until you decide to write them.
  451. 451 Be careful before using the write command.
  452. 452
  453. 453
  454. 454 Command (m for help): Partition number (1,2, default 2):
  455. 455 Partition 2 has been deleted.
  456. 456
  457. 457 Command (m for help): Partition type
  458. 458 p primary (1 primary, 0 extended, 3 free)
  459. 459 e extended (container for logical partitions)
  460. 460 Select (default p): Partition number (2-4, default 2): First sector (2048-500170751, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (270336-500170751, default 500170751): NAME FSTYPE SIZE MOUNTPOINT UUID
  461. 461 mmcblk0 238.5G
  462. 462 ├─mmcblk0p1 vfat 128M /boot 5ACB-E525
  463. 463 └─mmcblk0p2 ext4 236G / 1f71c790-52b3-441e-a8bc-e81a5f38f167
  464. 464
  465. 465 ### zramctl:
  466. 466
  467. 467
  468. 468
  469. 469 ### mtab:
  470. 470
  471. 471
  472. 472 Created a new partition 2 of type 'Linux' and of size 236 GiB.
  473. 473 Partition #2 contains a ext4 signature.
  474. 474
  475. 475 Command (m for help): /dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0
  476. 476 /dev/mmcblk0p2 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  477. 477 /dev/mmcblk0p2 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  478. 478
  479. 479 The partition table has been altered.
  480. 480 Syncing disks.
  481. 481
  482. 482 New partition table:
  483. 483
  484. 484
  485. 485 ### mmc0:0001 info:
  486. 486
  487. 487 major minor #blocks name
  488. 488
  489. 489 1 0 16384 ram0
  490. 490 1 1 16384 ram1
  491. 491 1 2 16384 ram2
  492. 492 1 3 16384 ram3
  493. 493 1 4 16384 ram4
  494. 494 1 5 16384 ram5
  495. 495 1 6 16384 ram6
  496. 496 1 7 16384 ram7
  497. 497 1 8 16384 ram8
  498. 498 1 9 16384 ram9
  499. 499 1 10 16384 ram10
  500. 500 1 11 16384 ram11
  501. 501 1 12 16384 ram12
  502. 502 1 13 16384 ram13
  503. 503 1 14 16384 ram14
  504. 504 1 15 16384 ram15
  505. 505 179 0 250085376 mmcblk0
  506. 506 179 1 131072 mmcblk0p1
  507. 507 179 2 247449344 mmcblk0p2
  508. 508
  509. 509 Now trying to resize ext4 filesystem on /dev/mmcblk0p2 to the limits:
  510. 510
  511. 511 manfid: 0x00001b
  512. 512 resize2fs 1.45.5 (07-Jan-2020)
  513. 513 cid: 1b534d45453851543099535703011600
  514. 514 fwrev: 0x0
  515. 515 rca: 0x0001
  516. 516 csd: 400e00325b59000773ff7f800a404000
  517. 517 ocr: 0x00200000
  518. 518 type: SD
  519. 519 date: 06/2017
  520. 520 hwrev: 0x3
  521. 521 dsr: 0x404
  522. 522 serial: 0x99535703
  523. 523 erase_size: 512
  524. 524 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=EE8QT MODALIAS=mmc:block
  525. 525 ssr: 00000000080000000400c0000f053c00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  526. 526 scr: 02c5800300000000
  527. 527 oemid: 0x534d
  528. 528 preferred_erase_size: 16777216
  529. 529 name: EE8QT
  530. 530
  531. 531 ### Boot system health:
  532. 532
  533. 533 Time CPU n/a load %cpu %sys %usr %nice %io %irq CPU
  534. 534 22:31:17: --- 0.99 4% 2% 1% 0% 0% 0% 39.0°C
  535. 535 22:31:18: --- 0.99 77% 6% 0% 1% 69% 0% 39.0°C
  536. 536 22:31:18: --- 0.99 36% 10% 0% 1% 24% 0% 39.0°C
  537. 537 22:31:19: --- 0.99 13% 9% 0% 2% 1% 0% 39.0°C
  538. 538 22:31:19: --- 0.99 22% 12% 0% 3% 6% 0% 39.0°C
  539. 539 Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
  540. 540 old_desc_blocks = 12, new_desc_blocks = 15
  541. 541 The filesystem on /dev/mmcblk0p2 is now 61862336 (4k) blocks long.
  542. 542
  543. 543
  544. 544 ### [resize2fs] Start resizing ext4 partition /dev/mmcblk0p2 now
  545. 545
  546. 546 resize2fs 1.45.5 (07-Jan-2020)
  547. 547 The filesystem is already 61862336 (4k) blocks long. Nothing to do!
  548. 548
  549. 549
  550. 550 ### quick iozone test: 4 278 1503 5032 5252 5216 2859
  551. 551
  552. 552 ### [firstrun] Recreated SSH keys (entropy: 11 25)
  553. 553
  554. 554 ### lsusb:
  555. 555
  556. 556 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  557. 557
  558. 558 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ci_hdrc/1p, 480M
  559. 559
  560. 560 ### Installed packages:
  561. 561
  562. 562 ii armbian-firmware 21.05.0-trunk all Linux firmware
  563. 563 ii hostapd 3:2.9-102~armbian20.05.2+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
  564. 564 ii htop 3.1.0-0~armbian20.08.2+1 armhf interactive processes viewer
  565. 565 ii linux-base 4.5ubuntu3.1 all Linux image base package
  566. 566 ii linux-dtb-legacy-zynq 21.05.0-trunk armhf Linux DTB, version 5.4.0-zynq-zynq-g93dc4dbd1-dirty
  567. 567 ii linux-focal-root-legacy-microzed 21.05.0-trunk armhf Armbian tweaks for focal on microzed (legacy branch)
  568. 568 ii linux-image-legacy-zynq 21.05.0-trunk armhf Linux kernel, version 5.4.0-zynq-zynq-g93dc4dbd1-dirty
  569. 569 ii linux-u-boot-microzed-legacy 21.05.0-trunk armhf Uboot loader 2020.01
  570. 570
  571. 571 ### Loaded modules:
  572. 572
  573. 573 Module Size Used by
  574. 574
  575. 575 ### Current system health:
  576. 576
  577. 577 Time CPU n/a load %cpu %sys %usr %nice %io %irq CPU
  578. 578 00:37:54: --- 0.06 1% 0% 0% 0% 0% 0% 41.0°C
  579. 579 00:37:54: --- 0.06 12% 10% 0% 2% 0% 0% 41.0°C
  580. 580 00:37:55: --- 0.06 11% 9% 0% 2% 0% 0% 41.0°C
  581. 581 00:37:55: --- 0.06 12% 7% 0% 5% 0% 0% 41.0°C
  582. 582 00:37:55: --- 0.06 11% 7% 0% 3% 0% 0% 41.0°C
  583. 583 00:37:56: --- 0.06 1% 0% 0% 0% 0% 0% 41.0°C
  584. 584 00:37:56: --- 0.06 13% 8% 0% 5% 0% 0% 41.0°C
  585. 585 00:37:57: --- 0.06 12% 10% 0% 2% 0% 0% 41.0°C
  586. 586 00:37:57: --- 0.06 11% 10% 0% 1% 0% 0% 41.0°C
  587. 587 00:37:58: --- 0.06 11% 10% 0% 1% 0% 0% 41.0°C
  588. 588
  589. 589 ### resolv.conf
  590. 590
  591. 591 -rw-r--r-- 1 root root 51 Mar 29 22:36 /etc/resolv.conf
  592. 592 # Generated by NetworkManager
  593. 593 nameserver XXX.XXX.0.1
  594. 594
  595. 595 ### Current sysinfo:
  596. 596
  597. 597 Linux 5.4.0-zynq-zynq-g93dc4dbd1-dirty (microzed) 03/30/2021 _armv7l_ (2 CPU)
  598. 598
  599. 599 avg-cpu: %user %nice %system %iowait %steal %idle
  600. 600 0.93 0.03 0.49 0.35 0.00 98.19
  601. 601
  602. 602 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd
  603. 603 ram0 0.00 0.00 0.00 0.00 0 0 0
  604. 604 ram1 0.00 0.00 0.00 0.00 0 0 0
  605. 605 ram2 0.00 0.00 0.00 0.00 0 0 0
  606. 606 ram3 0.00 0.00 0.00 0.00 0 0 0
  607. 607 ram4 0.00 0.00 0.00 0.00 0 0 0
  608. 608 ram5 0.00 0.00 0.00 0.00 0 0 0
  609. 609 ram6 0.00 0.00 0.00 0.00 0 0 0
  610. 610 ram7 0.00 0.00 0.00 0.00 0 0 0
  611. 611 ram8 0.00 0.00 0.00 0.00 0 0 0
  612. 612 ram9 0.00 0.00 0.00 0.00 0 0 0
  613. 613 ram10 0.00 0.00 0.00 0.00 0 0 0
  614. 614 ram11 0.00 0.00 0.00 0.00 0 0 0
  615. 615 ram12 0.00 0.00 0.00 0.00 0 0 0
  616. 616 ram13 0.00 0.00 0.00 0.00 0 0 0
  617. 617 ram14 0.00 0.00 0.00 0.00 0 0 0
  618. 618 ram15 0.00 0.00 0.00 0.00 0 0 0
  619. 619 mmcblk0 2.23 26.05 569.54 0.00 120756 2640067 0
  620. 620 mmcblk0p1 0.05 0.70 0.00 0.00 3267 7 0
  621. 621 mmcblk0p2 2.14 23.90 569.53 0.00 110801 2640056 0
  622. 622
  623. 623 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu--------
  624. 624 r b swpd free buff cache si so bi bo in cs us sy id wa st
  625. 625 0 0 0 880016 12460 108692 0 0 13 285 23 36 1 0 98 0 0
  626. 626
  627. 627 total used free shared buff/cache available
  628. 628 Mem: 1.0Gi 28Mi 859Mi 3.0Mi 118Mi 952Mi
  629. 629 Swap: 0B 0B 0B
  630. 630
  631. 631
  632. 632
  633. 633 00:38:17 up 1:17, 1 user, load average: 0.04, 0.01, 0.00
  634. 634
  635. 635 [ 0.238998] vgaarb: loaded
  636. 636 [ 0.239382] SCSI subsystem initialized
  637. 637 [ 0.239625] usbcore: registered new interface driver usbfs
  638. 638 [ 0.239681] usbcore: registered new interface driver hub
  639. 639 [ 0.239753] usbcore: registered new device driver usb
  640. 640 [ 0.239939] usb_phy_generic phy0: phy0 supply vcc not found, using dummy regulator
  641. 641 [ 0.240140] mc: Linux media interface: v0.10
  642. 642 [ 0.240236] videodev: Linux video capture interface: v2.00
  643. 643 [ 0.240277] pps_core: LinuxPPS API ver. 1 registered
  644. 644 [ 0.240284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  645. 645 [ 0.240305] PTP clock support registered
  646. 646 [ 0.240341] EDAC MC: Ver: 3.0.0
  647. 647 [ 0.240814] FPGA manager framework
  648. 648 [ 0.241055] Advanced Linux Sound Architecture Driver Initialized.
  649. 649 [ 0.242033] clocksource: Switched to clocksource arm_global_timer
  650. 650 [ 0.252025] thermal_sys: Registered thermal governor 'step_wise'
  651. 651 [ 0.252340] NET: Registered protocol family 2
  652. 652 [ 0.253006] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  653. 653 [ 0.253042] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  654. 654 [ 0.253131] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  655. 655 [ 0.253280] TCP: Hash tables configured (established 8192 bind 8192)
  656. 656 [ 0.253380] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  657. 657 [ 0.253433] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  658. 658 [ 0.253658] NET: Registered protocol family 1
  659. 659 [ 0.254231] RPC: Registered named UNIX socket transport module.
  660. 660 [ 0.254238] RPC: Registered udp transport module.
  661. 661 [ 0.254243] RPC: Registered tcp transport module.
  662. 662 [ 0.254248] RPC: Registered tcp NFSv4.1 backchannel transport module.
  663. 663 [ 0.254262] PCI: CLS 0 bytes, default 64
  664. 664 [ 0.254500] Trying to unpack rootfs image as initramfs...
  665. 665 [ 0.644832] Freeing initrd memory: 5660K
  666. 666 [ 0.645279] hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
  667. 667 [ 0.645533] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  668. 668 [ 0.647000] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  669. 669 [ 0.647965] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  670. 670 [ 0.648225] bounce: pool size: 64 pages
  671. 671 [ 0.648244] io scheduler mq-deadline registered
  672. 672 [ 0.648250] io scheduler kyber registered
  673. 673 [ 0.648565] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
  674. 674 [ 0.651235] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
  675. 675 [ 0.651250] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  676. 676 [ 0.661186] brd: module loaded
  677. 677 [ 0.667312] loop: module loaded
  678. 678 [ 0.668523] libphy: Fixed MDIO Bus: probed
  679. 679 [ 0.669521] CAN device driver interface
  680. 680 [ 0.670010] macb e000b000.ethernet: invalid hw address, using random
  681. 681 [ 0.670848] libphy: MACB_mii_bus: probed
  682. 682 [ 0.750225] Marvell 88E1510 e000b000.ethernet-ffffffff:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=e000b000.ethernet-ffffffff:00, irq=POLL)
  683. 683 [ 0.750247] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 25 (0a:9a:3d:fe:11:ee)
  684. 684 [ 0.750490] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  685. 685 [ 0.750495] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  686. 686 [ 0.751170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  687. 687 [ 0.751176] ehci-pci: EHCI PCI platform driver
  688. 688 [ 0.751277] usbcore: registered new interface driver usb-storage
  689. 689 [ 0.751747] chipidea-usb2 e0002000.usb: e0002000.usb supply vbus not found, using dummy regulator
  690. 690 [ 0.760900] ci_hdrc ci_hdrc.0: EHCI Host Controller
  691. 691 [ 0.760937] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
  692. 692 [ 0.790605] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
  693. 693 [ 0.791455] hub 1-0:1.0: USB hub found
  694. 694 [ 0.791500] hub 1-0:1.0: 1 port detected
  695. 695 [ 0.793199] i2c /dev entries driver
  696. 696 [ 0.794727] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
  697. 697 [ 0.795007] EDAC MC: ECC not enabled
  698. 698 [ 0.795156] Xilinx Zynq CpuIdle Driver started
  699. 699 [ 0.795576] sdhci: Secure Digital Host Controller Interface driver
  700. 700 [ 0.795582] sdhci: Copyright(c) Pierre Ossman
  701. 701 [ 0.795587] sdhci-pltfm: SDHCI platform and OF driver helper
  702. 702 [ 0.830230] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
  703. 703 [ 0.830625] ledtrig-cpu: registered to indicate activity on CPUs
  704. 704 [ 0.830838] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
  705. 705 [ 0.830920] timer #0 at (ptrval), irq=38
  706. 706 [ 0.831339] usbcore: registered new interface driver usbhid
  707. 707 [ 0.831345] usbhid: USB HID core driver
  708. 708 [ 0.833187] fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
  709. 709 [ 0.834622] NET: Registered protocol family 10
  710. 710 [ 0.835804] Segment Routing with IPv6
  711. 711 [ 0.835902] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  712. 712 [ 0.836617] NET: Registered protocol family 17
  713. 713 [ 0.836635] can: controller area network core (rev 20170425 abi 9)
  714. 714 [ 0.836698] NET: Registered protocol family 29
  715. 715 [ 0.836707] can: raw protocol (rev 20170425)
  716. 716 [ 0.836714] can: broadcast manager protocol (rev 20170425 t)
  717. 717 [ 0.836726] can: netlink gateway (rev 20190810) max_hops=1
  718. 718 [ 0.837134] Registering SWP/SWPB emulation handler
  719. 719 [ 0.837572] of-fpga-region fpga-full: FPGA Region probed
  720. 720 [ 0.837810] hctosys: unable to open rtc device (rtc0)
  721. 721 [ 0.837817] of_cfs_init
  722. 722 [ 0.837902] of_cfs_init: OK
  723. 723 [ 0.838175] ALSA device list:
  724. 724 [ 0.838183] No soundcards found.
  725. 725 [ 0.841680] Freeing unused kernel memory: 1024K
  726. 726 [ 0.862327] Run /init as init process
  727. 727 [ 0.871333] mmc0: new high speed SDXC card at address 0001
  728. 728 [ 0.871996] mmcblk0: mmc0:0001 EE8QT 239 GiB
  729. 729 [ 0.874104] mmcblk0: p1 p2
  730. 730 [ 1.502617] random: fast init done
  731. 731 [ 231.361628] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: (null)
  732. 732 [ 232.406398] systemd[1]: System time before build time, advancing clock.
  733. 733 [ 232.408728] systemd[1]: Failed to find module 'autofs4'
  734. 734 [ 232.454460] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  735. 735 [ 232.455119] systemd[1]: Detected architecture arm.
  736. 736 [ 232.513141] systemd[1]: Set hostname to <microzed>.
  737. 737 [ 233.141280] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
  738. 738 [ 233.634023] random: systemd: uninitialized urandom read (16 bytes read)
  739. 739 [ 233.634310] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  740. 740 [ 233.634334] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  741. 741 [ 233.635473] systemd[1]: Created slice system-modprobe.slice.
  742. 742 [ 233.662248] random: systemd: uninitialized urandom read (16 bytes read)
  743. 743 [ 233.662977] systemd[1]: Created slice system-serial-getty.slice.
  744. 744 [ 233.692216] random: systemd: uninitialized urandom read (16 bytes read)
  745. 745 [ 233.692793] systemd[1]: Created slice User and Session Slice.
  746. 746 [ 233.722267] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
  747. 747 [ 233.722753] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  748. 748 [ 233.752377] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  749. 749 [ 233.752684] systemd[1]: Reached target Local Encrypted Volumes.
  750. 750 [ 233.782582] systemd[1]: Reached target Remote File Systems.
  751. 751 [ 233.812267] systemd[1]: Reached target Slices.
  752. 752 [ 233.842340] systemd[1]: Reached target Swap.
  753. 753 [ 233.872287] systemd[1]: Reached target System Time Set.
  754. 754 [ 233.902942] systemd[1]: Listening on Syslog Socket.
  755. 755 [ 233.932867] systemd[1]: Listening on fsck to fsckd communication Socket.
  756. 756 [ 233.962623] systemd[1]: Listening on initctl Compatibility Named Pipe.
  757. 757 [ 234.001546] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  758. 758 [ 234.002517] systemd[1]: Listening on Journal Socket (/dev/log).
  759. 759 [ 234.043065] systemd[1]: Listening on Journal Socket.
  760. 760 [ 234.073000] systemd[1]: Listening on udev Control Socket.
  761. 761 [ 234.102811] systemd[1]: Listening on udev Kernel Socket.
  762. 762 [ 234.132830] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  763. 763 [ 234.133357] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
  764. 764 [ 234.133935] systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
  765. 765 [ 234.134428] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  766. 766 [ 234.140112] systemd[1]: Starting Restore / save the current clock...
  767. 767 [ 234.176305] systemd[1]: Starting Set the console keyboard layout...
  768. 768 [ 234.212701] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  769. 769 [ 234.213052] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  770. 770 [ 234.217238] systemd[1]: Started Nameserver information manager.
  771. 771 [ 234.262952] systemd[1]: Reached target Network (Pre).
  772. 772 [ 234.295256] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  773. 773 [ 234.295496] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  774. 774 [ 234.302475] systemd[1]: Starting Load Kernel Modules...
  775. 775 [ 234.335750] systemd[1]: Starting Remount Root and Kernel File Systems...
  776. 776 [ 234.366925] systemd[1]: Starting udev Coldplug all Devices...
  777. 777 [ 234.402288] systemd[1]: Finished Restore / save the current clock.
  778. 778 [ 234.436270] systemd[1]: Finished Load Kernel Modules.
  779. 779 [ 234.436542] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
  780. 780 [ 234.482821] systemd[1]: Finished Remount Root and Kernel File Systems.
  781. 781 [ 234.513983] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  782. 782 [ 234.517705] systemd[1]: Mounting Kernel Configuration File System...
  783. 783 [ 234.554858] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  784. 784 [ 234.555171] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  785. 785 [ 234.558748] systemd[1]: Starting Load/Save Random Seed...
  786. 786 [ 234.585922] systemd[1]: Starting Apply Kernel Variables...
  787. 787 [ 234.615942] systemd[1]: Starting Create System Users...
  788. 788 [ 234.664544] systemd[1]: Mounted Kernel Configuration File System.
  789. 789 [ 234.694731] systemd[1]: Finished Apply Kernel Variables.
  790. 790 [ 234.736307] systemd[1]: Finished Create System Users.
  791. 791 [ 234.766436] systemd[1]: Starting Create Static Device Nodes in /dev...
  792. 792 [ 234.804166] systemd[1]: Finished Set the console keyboard layout.
  793. 793 [ 234.850653] systemd[1]: Finished Create Static Device Nodes in /dev.
  794. 794 [ 234.883012] systemd[1]: Reached target Local File Systems (Pre).
  795. 795 [ 234.916565] systemd[1]: Mounting /tmp...
  796. 796 [ 234.955836] systemd[1]: Starting udev Kernel Device Manager...
  797. 797 [ 234.970360] systemd[171]: systemd-udevd.service: ProtectHostname=yes is configured, but the kernel does not support UTS namespaces, ignoring namespace setup.
  798. 798 [ 234.988531] systemd[1]: Finished udev Coldplug all Devices.
  799. 799 [ 235.023547] systemd[1]: Mounted /tmp.
  800. 800 [ 235.057838] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  801. 801 [ 235.086983] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  802. 802 [ 235.138198] systemd[1]: Started udev Kernel Device Manager.
  803. 803 [ 235.495473] systemd[1]: Found device /dev/ttyPS0.
  804. 804 [ 236.084699] systemd[1]: Found device /dev/disk/by-uuid/5ACB-E525.
  805. 805 [ 236.164796] systemd[1]: Mounting /boot...
  806. 806 [ 236.190660] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  807. 807 [ 236.200501] systemd[1]: Mounted /boot.
  808. 808 [ 236.222872] systemd[1]: Reached target Local File Systems.
  809. 809 [ 236.255834] systemd[1]: Starting Armbian ZRAM config...
  810. 810 [ 236.286471] systemd[1]: Starting Set console font and keymap...
  811. 811 [ 236.317454] systemd[1]: Starting Raise network interfaces...
  812. 812 [ 236.342484] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  813. 813 [ 236.349052] systemd[1]: Finished Set console font and keymap.
  814. 814 [ 236.769600] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
  815. 815 [ 236.770535] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
  816. 816 [ 236.771577] systemd[1]: Failed to start Armbian ZRAM config.
  817. 817 [ 236.836509] systemd[1]: Starting Armbian memory supported logging...
  818. 818 [ 236.874105] systemd[1]: Finished Raise network interfaces.
  819. 819 [ 238.122091] random: crng init done
  820. 820 [ 238.122105] random: 7 urandom warning(s) missed due to ratelimiting
  821. 821 [ 238.136028] systemd[1]: Finished Load/Save Random Seed.
  822. 822 [ 238.172950] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  823. 823 [ 241.740803] systemd[1]: Finished Armbian memory supported logging.
  824. 824 [ 241.776894] systemd[1]: Starting Journal Service...
  825. 825 [ 241.864231] systemd[1]: Started Journal Service.
  826. 826 [ 241.940757] systemd-journald[306]: Received client request to flush runtime journal.
  827. 827 [ 244.490853] EXT4-fs (mmcblk0p2): resizing filesystem from 48758784 to 61862336 blocks
  828. 828 [ 255.145681] EXT4-fs (mmcblk0p2): resized to 49283072 blocks
  829. 829 [ 266.429307] EXT4-fs (mmcblk0p2): resized to 49807360 blocks
  830. 830 [ 278.278401] EXT4-fs (mmcblk0p2): resized to 50331648 blocks
  831. 831 [ 289.271107] EXT4-fs (mmcblk0p2): resized to 50855936 blocks
  832. 832 [ 300.639067] EXT4-fs (mmcblk0p2): resized to 51380224 blocks
  833. 833 [ 311.175556] EXT4-fs (mmcblk0p2): resized to 51904512 blocks
  834. 834 [ 321.728192] EXT4-fs (mmcblk0p2): resized to 52428800 blocks
  835. 835 [ 332.674979] EXT4-fs (mmcblk0p2): resized to 52953088 blocks
  836. 836 [ 343.221953] EXT4-fs (mmcblk0p2): resized to 53477376 blocks
  837. 837 [ 354.754817] EXT4-fs (mmcblk0p2): resized to 54001664 blocks
  838. 838 [ 365.235274] EXT4-fs (mmcblk0p2): resized to 54525952 blocks
  839. 839 [ 377.045594] EXT4-fs (mmcblk0p2): resized to 55050240 blocks
  840. 840 [ 388.738606] EXT4-fs (mmcblk0p2): resized to 55574528 blocks
  841. 841 [ 400.887609] EXT4-fs (mmcblk0p2): resized to 56098816 blocks
  842. 842 [ 412.838511] EXT4-fs (mmcblk0p2): resized to 56623104 blocks
  843. 843 [ 423.367021] EXT4-fs (mmcblk0p2): resized to 57147392 blocks
  844. 844 [ 433.911702] EXT4-fs (mmcblk0p2): resized to 57671680 blocks
  845. 845 [ 444.441410] EXT4-fs (mmcblk0p2): resized to 58195968 blocks
  846. 846 [ 455.277013] EXT4-fs (mmcblk0p2): resized to 58720256 blocks
  847. 847 [ 466.000067] EXT4-fs (mmcblk0p2): resized to 59244544 blocks
  848. 848 [ 478.744547] EXT4-fs (mmcblk0p2): resized to 59768832 blocks
  849. 849 [ 489.346193] EXT4-fs (mmcblk0p2): resized to 60293120 blocks
  850. 850 [ 499.899436] EXT4-fs (mmcblk0p2): resized to 60817408 blocks
  851. 851 [ 510.410557] EXT4-fs (mmcblk0p2): resized to 61341696 blocks
  852. 852 [ 521.121852] EXT4-fs (mmcblk0p2): resized filesystem to 61862336
  853. 853 [ 533.122709] macb e000b000.ethernet eth0: link up (1000/Full)
  854. 854 [ 533.122746] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  855. 855
  856. 856
  857. 857 vm.admin_reserve_kbytes = 8192
  858. 858 vm.block_dump = 0
  859. 859 vm.dirty_background_bytes = 0
  860. 860 vm.dirty_background_ratio = 10
  861. 861 vm.dirty_bytes = 0
  862. 862 vm.dirty_expire_centisecs = 3000
  863. 863 vm.dirty_ratio = 20
  864. 864 vm.dirtytime_expire_seconds = 43200
  865. 865 vm.dirty_writeback_centisecs = 500
  866. 866 vm.drop_caches = 0
  867. 867 vm.highmem_is_dirtyable = 0
  868. 868 vm.laptop_mode = 0
  869. 869 vm.legacy_va_layout = 0
  870. 870 vm.lowmem_reserve_ratio = 32 0 0
  871. 871 vm.max_map_count = 65530
  872. 872 vm.min_free_kbytes = 3490
  873. 873 vm.mmap_min_addr = 32768
  874. 874 vm.oom_dump_tasks = 1
  875. 875 vm.oom_kill_allocating_task = 0
  876. 876 vm.overcommit_kbytes = 0
  877. 877 vm.overcommit_memory = 0
  878. 878 vm.overcommit_ratio = 50
  879. 879 vm.page-cluster = 3
  880. 880 vm.panic_on_oom = 0
  881. 881 vm.percpu_pagelist_fraction = 0
  882. 882 vm.stat_interval = 1
  883. 883 vm.swappiness = 100
  884. 884 vm.user_reserve_kbytes = 31926
  885. 885 vm.vfs_cache_pressure = 100
  886. 886 vm.watermark_boost_factor = 15000
  887. 887 vm.watermark_scale_factor = 10
  888. 888
  889. 889 ### interrupts:
  890. 890 CPU0 CPU1
  891. 891 16: 0 0 GIC-0 27 Edge gt
  892. 892 17: 118721 17013 GIC-0 29 Edge twd
  893. 893 18: 0 0 GIC-0 37 Level arm-pmu
  894. 894 19: 0 0 GIC-0 38 Level arm-pmu
  895. 895 20: 43 0 GIC-0 39 Level f8007100.adc
  896. 896 23: 0 0 GIC-0 35 Level f800c000.ocmc
  897. 897 24: 2684 0 GIC-0 82 Level xuartps
  898. 898 25: 4292 0 GIC-0 54 Level eth0
  899. 899 26: 37528 0 GIC-0 56 Level mmc0
  900. 900 27: 0 0 GIC-0 45 Level f8003000.dmac
  901. 901 28: 0 0 GIC-0 46 Level f8003000.dmac
  902. 902 29: 0 0 GIC-0 47 Level f8003000.dmac
  903. 903 30: 0 0 GIC-0 48 Level f8003000.dmac
  904. 904 31: 0 0 GIC-0 49 Level f8003000.dmac
  905. 905 32: 0 0 GIC-0 72 Level f8003000.dmac
  906. 906 33: 0 0 GIC-0 73 Level f8003000.dmac
  907. 907 34: 0 0 GIC-0 74 Level f8003000.dmac
  908. 908 35: 0 0 GIC-0 75 Level f8003000.dmac
  909. 909 36: 0 0 GIC-0 40 Level f8007000.devcfg
  910. 910 38: 0 0 GIC-0 43 Level ttc_clockevent
  911. 911 43: 0 0 GIC-0 53 Level e0002000.usb
  912. 912 44: 0 0 GIC-0 41 Edge f8005000.watchdog
  913. 913 IPI1: 0 0 Timer broadcast interrupts
  914. 914 IPI2: 9201 22921 Rescheduling interrupts
  915. 915 IPI3: 7 20 Function call interrupts
  916. 916 IPI4: 0 0 CPU stop interrupts
  917. 917 IPI5: 0 0 IRQ work interrupts
  918. 918 IPI6: 0 0 completion interrupts
  919. 919 Err: 0
  920.  
  921. Please upload the whole output above to an online pasteboard service
  922. and provide the URL in the forum where you have been asked for this.
  923.  
  924.  
Add Comment
Please, Sign In to add comment