API tools faq
paste
Advertisement
hay004ero

wzr1750dhp-r23503.flash_to_bootlog

hay004ero
Feb 19th, 2020
398
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.63 KB | None | 0 0
raw download clone embed print report
  1. BUFFALO CFE Version 1.00 [DDRCLK:333]
  2. decompressing
  3. Decompressing...done
  4. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  5. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  6.  
  7. DDR clock change and Calibrate... [333->533]
  8.  
  9.  
  10. BUFFALO CFE Version 1.00 [DDRCLK:533]
  11. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  12. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  13. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  14. Fill test patnum:2
  15. fill Pattern 5555AAAA Writing... Reading...
  16. fill Pattern AAAA5555 Writing... Reading...
  17. decompressing
  18. Decompressing...done
  19. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  20.  
  21.  
  22. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  23. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  24. Copyright (C) 2000-2008 Broadcom Corporation.
  25.  
  26. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  27. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  28. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  29. Fill test patnum:2
  30. fill Pattern 5555AAAA Writing... Reading...
  31. fill Pattern AAAA5555 Writing... Reading...
  32. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  33. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  34. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  35. Fill test patnum:2
  36. fill Pattern 5555AAAA Writing... Reading...
  37. fill Pattern AAAA5555 Writing... Reading...
  38. Init Arena
  39. Init Devs.
  40. Boot partition size = 262144(0x40000)
  41. Found a Esmt NAND flash:
  42. Total size: 128MB
  43. Block size: 128KB
  44. Page Size: 2048B
  45. OOB Size: 64B
  46. Sector size: 512B
  47. Spare size: 16B
  48. ECC level: 8-bit
  49. Device ID: 0x92 0xf1 0x80 0x95 0x40
  50. DDR Clock: 533 MHz
  51. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  52. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  53. CPU type 0x0: 800MHz
  54. Tot mem: 524288 KBytes
  55.  
  56. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  57. Data: 0x07E53480 - 0x07E53948 (1224)
  58. BSS: 0x07E53958 - 0x07E98984 (282668)
  59. Heap: 0x07E98984 - 0x07F98984 (1048576)
  60. Stack: 0x07F98984 - 0x07F9A984 (8192)
  61. Text: 0x07E00000 - 0x07E488F0 (297200)
  62. Boot: 0x07F9B000 - 0x07FDB000
  63. Reloc: I:00000000 - D:00000000
  64.  
  65. Device eth0: hwaddr B2-C7-45-XX-XX-XX, ipaddr 192.168.11.1, mask 255.255.255.0
  66. gateway not set, nameserver not set
  67. Startup canceled
  68. CFE> ^C
  69. CFE> flash -noheader 192.168.11.2:buffalo-wzr-1750dhp-webflash.bin nflash1.trx
  70. Reading 192.168.11.2:buffalo-wzr-1750dhp-webflash.bin: Done. 24272896 bytes read
  71. Programming...done. 24272896 bytes written
  72. *** command status = 0
  73. CFE> nvram erase
  74. *** command status = 0
  75. FE> reboot
  76.  
  77. BUFFALO CFE Version 1.00 [DDRCLK:333]
  78. decompressing
  79. Decompressing...done
  80. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  81. Corrupt NVRAM found, trying embedded NVRAM next.
  82.  
  83.  
  84. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  85. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  86. Copyright (C) 2000-2008 Broadcom Corporation.
  87.  
  88. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  89. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  90. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  91. Fill test patnum:2
  92. fill Pattern 5555AAAA Writing... Reading...
  93. fill Pattern AAAA5555 Writing... Reading...
  94. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  95. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  96. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  97. Fill test patnum:2
  98. fill Pattern 5555AAAA Writing... Reading...
  99. fill Pattern AAAA5555 Writing... Reading...
  100. Init Arena
  101. Init Devs.
  102. Boot partition size = 262144(0x40000)
  103. Found a Esmt NAND flash:
  104. Total size: 128MB
  105. Block size: 128KB
  106. Page Size: 2048B
  107. OOB Size: 64B
  108. Sector size: 512B
  109. Spare size: 16B
  110. ECC level: 8-bit
  111. Device ID: 0x92 0xf1 0x80 0x95 0x40
  112. DDR Clock: 333 MHz
  113. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  114. Warning: invalid DDR setting of 533 MHz ignored. DDR frequency will be set to 333 MHz.
  115. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  116. CPU type 0x0: 800MHz
  117. Tot mem: 524288 KBytes
  118.  
  119. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  120. Data: 0x07E53480 - 0x07E53948 (1224)
  121. BSS: 0x07E53958 - 0x07E98984 (282668)
  122. Heap: 0x07E98984 - 0x07F98984 (1048576)
  123. Stack: 0x07F98984 - 0x07F9A984 (8192)
  124. Text: 0x07E00000 - 0x07E488F0 (297200)
  125. Boot: 0x07F9B000 - 0x07FDB000
  126. Reloc: I:00000000 - D:00000000
  127.  
  128. initializing nvram...Corrupt NVRAM found, trying embedded NVRAM next.
  129. done
  130. commiting nvram...done
  131. now rebooting
  132.  
  133. BUFFALO CFE Version 1.00 [DDRCLK:333]
  134. decompressing
  135. Decompressing...done
  136. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  137. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  138.  
  139. DDR clock change and Calibrate... [333->533]
  140.  
  141.  
  142. BUFFALO CFE Version 1.00 [DDRCLK:533]
  143. Memory Test start(0x07E00000) end(0x08000000) size(2097152)
  144. Data line test start:0x07e00000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  145. Address line test start:0x07e00000 len:0x200000 pattern 0xAAAAAAAA 0x55555555
  146. Fill test patnum:2
  147. fill Pattern 5555AAAA Writing... Reading...
  148. fill Pattern AAAA5555 Writing... Reading...
  149. decompressing
  150. Decompressing...done
  151. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  152.  
  153.  
  154. CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
  155. Build Date: Fri Jan 18 16:22:36 JST 2013 (root@fc17.localdomain)
  156. Copyright (C) 2000-2008 Broadcom Corporation.
  157.  
  158. Memory Test start(0x00000000) end(0x07E00000) size(132120576)
  159. Data line test start:0x00000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  160. Address line test start:0x00000000 len:0x7e00000 pattern 0xAAAAAAAA 0x55555555
  161. Fill test patnum:2
  162. fill Pattern 5555AAAA Writing... Reading...
  163. fill Pattern AAAA5555 Writing... Reading...
  164. Memory Test start(0x88000000) end(0xA0000000) size(402653184)
  165. Data line test start:0x88000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
  166. Address line test start:0x88000000 len:0x18000000 pattern 0xAAAAAAAA 0x55555555
  167. Fill test patnum:2
  168. fill Pattern 5555AAAA Writing... Reading...
  169. fill Pattern AAAA5555 Writing... Reading...
  170. Init Arena
  171. Init Devs.
  172. Boot partition size = 262144(0x40000)
  173. Found a Esmt NAND flash:
  174. Total size: 128MB
  175. Block size: 128KB
  176. Page Size: 2048B
  177. OOB Size: 64B
  178. Sector size: 512B
  179. Spare size: 16B
  180. ECC level: 8-bit
  181. Device ID: 0x92 0xf1 0x80 0x95 0x40
  182. DDR Clock: 533 MHz
  183. Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored.
  184. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
  185. CPU type 0x0: 800MHz
  186. Tot mem: 524288 KBytes
  187.  
  188. CFE mem: 0x07E00000 - 0x07F9A984 (1681796)
  189. Data: 0x07E53480 - 0x07E53948 (1224)
  190. BSS: 0x07E53958 - 0x07E98984 (282668)
  191. Heap: 0x07E98984 - 0x07F98984 (1048576)
  192. Stack: 0x07F98984 - 0x07F9A984 (8192)
  193. Text: 0x07E00000 - 0x07E488F0 (297200)
  194. Boot: 0x07F9B000 - 0x07FDB000
  195. Reloc: I:00000000 - D:00000000
  196.  
  197. Committing NVRAM...done
  198. Device eth0: hwaddr B2-C7-45-XX-XX-XX, ipaddr 192.168.11.1, mask 255.255.255.0
  199. gateway not set, nameserver not set
  200. check_trx: start nflash1.trx
  201. check_trx: exit nflash1.trx
  202. Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
  203. Loading: .. 1283832 bytes read
  204. Entry at 0x00008000
  205. Closing network.
  206. Starting program at 0x00008000
  207. Uncompressing Linux... done, booting the kernel.
  208. Booting Linux on physical CPU 0x0
  209. Linux version 3.10.28 (root@dd-wrt.buildserver) (gcc version 4.8.2 (OpenWrt/Linaro GCC 4.8-2013.10 r38451) ) #1228 SMP Tue Feb 4 04:40:54 CET 2014
  210. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  211. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  212. Machine: Northstar Prototype
  213. Ignoring unrecognised tag 0x00000000
  214. Memory policy: ECC disabled, Data cache writealloc
  215. map io
  216. MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
  217. PERCPU: Embedded 7 pages/cpu @c1804000 s7040 r8192 d13440 u32768
  218. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130816
  219. Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
  220. PID hash table entries: 512 (order: -1, 2048 bytes)
  221. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  222. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  223. Memory: 128MB 384MB = 512MB total
  224. Memory: 515908k/515908k available, 8380k reserved, 393216K highmem
  225. Virtual kernel memory layout:
  226. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  227. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  228. vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  229. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  230. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  231. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  232. .text : 0xc0008000 - 0xc031dda4 (3160 kB)
  233. .init : 0xc031e000 - 0xc0357b80 ( 231 kB)
  234. .data : 0xc0358000 - 0xc03947fc ( 242 kB)
  235. .bss : 0xc03947fc - 0xc03f4e18 ( 386 kB)
  236. Hierarchical RCU implementation.
  237. CONFIG_RCU_FANOUT set to non-default value of 2
  238. NR_IRQS:256
  239. MPCORE GIC init
  240. External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
  241. MPCORE Global Timer Clock 400000000Hz on IRQ 27
  242. sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
  243. register local timer
  244. smp_twd: clock not found -2
  245. Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
  246. pid_max: default: 32768 minimum: 301
  247. Mount-cache hash table entries: 512
  248. CPU: Testing write buffer coherency: ok
  249. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  250. Calibrating local timer... 399.68MHz.
  251. 2 cores has been found
  252. Setting up static identity map for 0xc0012440 - 0xc0012474
  253. L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
  254. CPU1: Booted secondary processor
  255. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  256. Brought up 2 CPUs
  257. SMP: Total of 2 processors activated (3188.32 BogoMIPS).
  258. NET: Registered protocol family 16
  259. DMA: preallocated 256 KiB pool for atomic coherent allocations
  260. Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total size 1MB
  261. CCA UART Clock Config: Sel=1 Ovr=1 Div=48
  262. CCA UART Clock rate 100000000Hz
  263. bio: create slab <bio-0> at 0
  264. Switching to clocksource mpcore_gtimer
  265. NET: Registered protocol family 2
  266. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  267. TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  268. TCP: Hash tables configured (established 1024 bind 1024)
  269. TCP: reno registered
  270. UDP hash table entries: 256 (order: 1, 8192 bytes)
  271. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  272. NET: Registered protocol family 1
  273. init gpio code
  274. Buffalo WZR-1750DHP
  275. PCI: no core
  276. PCI: no core
  277. PCI: scanning bus 0
  278. PCI host bridge to bus 0000:00
  279. pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
  280. pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  281. pci_bus 0000:00: root bus resource [bus 00-ff]
  282. PCI: Fixing up bus 0
  283. PCIE1 link=1
  284. PCIE1 switching to GEN2
  285. PCIE1 link=1
  286. PCI host bridge to bus 0001:00
  287. pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
  288. pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  289. PCI: Fixing up bus 0
  290. PCI: bus0: Fast back to back transfers disabled
  291. PCI: Fixing up bus 1
  292. PCI: bus1: Fast back to back transfers disabled
  293. pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  294. pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  295. pci 0001:00:00.0: PCI bridge to [bus 01]
  296. pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  297. PCIE2 link=1
  298. PCIE2 switching to GEN2
  299. PCIE2 link=1
  300. PCI host bridge to bus 0002:00
  301. pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
  302. pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
  303. PCI: Fixing up bus 0
  304. PCI: bus0: Fast back to back transfers disabled
  305. PCI: Fixing up bus 2
  306. PCI: bus2: Fast back to back transfers disabled
  307. pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  308. pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit]
  309. pci 0002:00:00.0: PCI bridge to [bus 02]
  310. pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  311. PCIE3 link=0
  312. Error creating gpio class
  313. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  314. msgmni has been set to 239
  315. alg: No test for stdrng (krng)
  316. io scheduler noop registered (default)
  317. io scheduler cfq registered
  318. Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  319. serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
  320. console [ttyS0] enabled
  321. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
  322. brd: module loaded
  323. loop: module loaded
  324. Boot partition size = 262144(0x40000)
  325. Creating 2 MTD partitions on "bcmsflash":
  326. 0x000000000000-0x000000040000 : "boot"
  327. 0x0000000f0000-0x000000100000 : "nvram"
  328. Found a Esmt NAND flash:
  329. Total size: 128MB
  330. Block size: 128KB
  331. Page Size: 2048B
  332. OOB Size: 64B
  333. Sector size: 512B
  334. Spare size: 16B
  335. ECC level: 8 (8-bit)
  336. Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
  337. lookup_nflash_rootfs_offset: offset = 0x0, 0x20000
  338. found TRX Header on nflash!
  339. nflash: squash filesystem with lzma found at block 10
  340. Creating 2 MTD partitions on "nflash":
  341. 0x000000000000-0x000002000000 : "linux"
  342. 0x000000140000-0x000002000000 : "rootfs"
  343. tun: Universal TUN/TAP device driver, 1.6
  344. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  345. PPP generic driver version 2.4.2
  346. PPP BSD Compression module registered
  347. PPP Deflate Compression module registered
  348. PPP MPPE Compression module registered
  349. NET: Registered protocol family 24
  350. GACT probability NOT on
  351. Mirror/redirect action on
  352. Failed to load ipt action
  353. Simple TC action Loaded
  354. netem: version 1.3
  355. u32 classifier
  356. Performance counters on
  357. input device check on
  358. Actions configured
  359. Netfilter messages via NETLINK v0.30.
  360. nf_conntrack version 0.5.0 (8061 buckets, 32244 max)
  361. nf_conntrack_rtsp v0.6.21 loading
  362. xt_time: kernel timezone is -0000
  363. ip_set: protocol 6
  364. gre: GRE over IPv4 demultiplexor driver
  365. nf_nat_rtsp v0.6.21 loading
  366. ip_tables: (C) 2000-2006 Netfilter Core Team
  367. TCP: bic registered
  368. TCP: cubic registered
  369. TCP: westwood registered
  370. TCP: highspeed registered
  371. TCP: hybla registered
  372. TCP: htcp registered
  373. TCP: vegas registered
  374. TCP: veno registered
  375. TCP: scalable registered
  376. TCP: lp registered
  377. TCP: yeah registered
  378. TCP: illinois registered
  379. NET: Registered protocol family 17
  380. Bridge firewalling registered
  381. 8021q: 802.1Q VLAN Support v1.8
  382. Key type encrypted registered
  383. Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
  384. NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Eon NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  385. Spare area=64 eccbytes 56, ecc bytes located at:
  386. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
  387. Available 7 bytes at (off,len):
  388. (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
  389. Driver must set ecc.strength when using hardware ECC
  390. Scanning device for bad blocks
  391. Options: NO_SUBPAGE_WRITE,
  392. Creating 1 MTD partitions on "brcmnand":
  393. 0x000002000000-0x000008000000 : "ddwrt"
  394. VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  395. Freeing unused kernel memory: 228K (c031e000 - c0357000)
  396. start service
  397. starting Architecture code for northstar
  398. starting hotplug
  399. Jan 1 00:00:04 udevtrigger[306]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
  400. start MSTP Daemon
  401. 1970-01-01 00:00:05 main: Sanity checks succeeded
  402. done
  403. softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
  404. try modules for ethernet adapters
  405. insmod: ctf.ko: module not found
  406. et: module license 'Proprietary' taints kernel.
  407. Disabling lock debugging due to kernel taint
  408. et_module_init: passivemode set to 0x0
  409. et_module_init: txworkq set to 0x0
  410. et_module_init: et_txq_thresh set to 0x400
  411. et0: online cpus 2
  412. eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.62 (r437318)
  413. roboswitch: Probing device 'eth0'
  414. roboswitch: trying a 53011! at eth0
  415. roboswitch: found a 53011! at eth0
  416. PCI: Enabling device 0002:02:00.0 (0140 -> 0142)
  417. [USB] checking...
  418. umount: can't umount /mnt: No such file or directory
  419. rmmod: usblp: No such file or directory
  420. rmmod: printer: No such file or directory
  421. rmmod: usb-storage: No such file or directory
  422. rmmod: sr_mod: No such file or directory
  423. rmmod: cdrom: No such file or directory
  424. rmmod: sd_mod: No such file or directory
  425. rmmod: scsi_wait_scan: No such file or directory
  426. rmmod: scsi_mod: No such file or directory
  427. rmmod: usbmisc_imx: No such file or directory
  428. rmmod: ci13xxx_imx: No such file or directory
  429. rmmod: ci_hdrc: No such file or directory
  430. rmmod: phy-mxs-usb: No such file or directory
  431. rmmod: fsl-mph-dr-of: No such file or directory
  432. rmmod: usb-libusual: No such file or directory
  433. rmmod: dwc_otg: No such file or directory
  434. rmmod: xhci-hcd: No such file or directory
  435. rmmod: usb-ohci: No such file or directory
  436. rmmod: ohci-hcd: No such file or directory
  437. rmmod: uhci-hcd: No such file or directory
  438. rmmod: usb-uhci: No such file or directory
  439. rmmod: ehci-pci: No such file or directory
  440. rmmod: ehci-platform: No such file or directory
  441. rmmod: ehci-hcd: No such file or directory
  442. rmmod: fsl-mph-dr-of: No such file or directory
  443. rmmod: usbcore: No such file or directory
  444. rmmod: usb-common: No such file or directory
  445. rmmod: xfs: No such file or directory
  446. rmmod: msdos: No such file or directory
  447. rmmod: vfat: No such file or directory
  448. rmmod: fat: No such file or directory
  449. rmmod: nls_utf8: No such file or directory
  450. rmmod: nls_iso8859-2: No such file or directory
  451. rmmod: nls_iso8859-1: No such file or directory
  452. rmmod: nls_cp437: No such file or directory
  453. rmmod: nls_cp932: No such file or directory
  454. rmmod: nls_cp936: No such file or directory
  455. rmmod: nls_cp950: No such file or directory
  456. rmmod: nls_base: No such file or directory
  457. rmmod: ext3: No such file or directory
  458. rmmod: jbd: No such file or directory
  459. rmmod: ext2: No such file or directory
  460. rmmod: mbcache: No such file or directory
  461. rmmod: fuse: No such file or directory
  462. deadlock detected, try to fix it
  463. vconfig: ioctl error for add: File exists
  464. vconfig: ioctl error for add: File exists
  465. eth0: mixed HW and IP checksum settings.
  466. eth1: Operation not supported
  467. wl0.1: No such device
  468. wl0.2: No such device
  469. wl0.3: No such device
  470. eth1: Operation not permitted
  471. nbw = 20
  472. channel 6, val 20
  473. C000, 1000, 0, 6
  474. spec D006
  475. eth1: Invalid argument
  476. eth1: Operation not supported
  477. eth1: Operation not supported
  478. eth1: Operation not supported
  479. eth1: Operation not supported
  480. eth1: Operation not supported
  481. eth1: Operation not supported
  482. eth1: Operation not supported
  483. eth1: Operation not supported
  484. eth1: Operation not supported
  485. eth1: Operation not supported
  486. eth1: Operation not supported
  487. eth1: Operation not supported
  488. eth1: Operation not supported
  489. eth1: Operation not supported
  490. eth1: Operation not supported
  491. eth1: Operation not supported
  492. eth1: Operation not supported
  493. eth1: Operation not supported
  494. eth1: Operation not supported
  495. eth1: Operation not supported
  496. eth1: Operation not supported
  497. eth1: Operation not supported
  498. eth1: Operation not supported
  499. eth1: Operation not supported
  500. eth1: Operation not supported
  501. eth1: Operation not supported
  502. eth1: Operation not supported
  503. eth1: Operation not supported
  504. eth1: Operation not supported
  505. eth1: Operation not supported
  506. eth1: Operation not supported
  507. wl: Unsupported
  508. wl: Not up
  509. eth2: Operation not supported
  510. wl1.1: No such device
  511. wl1.2: No such device
  512. wl1.3: No such device
  513. eth2: Operation not permitted
  514. eth2: Argument list too long
  515. eth2: Operation not supported
  516. eth2: Operation not supported
  517. eth2: Operation not supported
  518. eth2: Operation not supported
  519. eth2: Operation not supported
  520. eth2: Operation not supported
  521. eth2: Operation not supported
  522. eth2: Operation not supported
  523. eth2: Operation not supported
  524. eth2: Operation not supported
  525. eth2: Operation not supported
  526. eth2: Operation not supported
  527. eth2: Operation not supported
  528. eth2: Operation not supported
  529. eth2: Operation not supported
  530. eth2: Operation not supported
  531. eth2: Operation not supported
  532. eth2: Operation not supported
  533. eth2: Operation not supported
  534. eth2: Operation not supported
  535. eth2: Operation not supported
  536. eth2: Operation not supported
  537. eth2: Operation not supported
  538. eth2: Operation not supported
  539. eth2: Operation not supported
  540. eth2: Operation not supported
  541. eth2: Operation not supported
  542. eth2: Operation not supported
  543. eth2: Operation not supported
  544. eth2: Operation not supported
  545. eth2: Operation not supported
  546. wl: Unsupported
  547. device br0 entered promiscuous mode
  548. CTL_set_cist_bridge_config: Got return code 0, -1
  549.  
  550. Couldn't change bridge bridge_forward_delay
  551. killall: ead: no process killed
  552. br0: Invalid argument
  553. device vlan1 entered promiscuous mode
  554. device eth0 entered promiscuous mode
  555. eth1: Operation not supported
  556. wl0.1: No such device
  557. wl0.2: No such device
  558. wl0.3: No such device
  559. eth1: Operation not permitted
  560. eth1: Invalid argument
  561. nbw = 20
  562. channel 6, val 20
  563. C000, 1000, 0, 6
  564. spec D006
  565. eth1: Invalid argument
  566. eth1: Operation not supported
  567. eth1: Operation not supported
  568. eth1: Operation not supported
  569. eth1: Operation not supported
  570. eth1: Operation not supported
  571. eth1: Operation not supported
  572. eth1: Operation not supported
  573. eth1: Operation not supported
  574. eth1: Operation not supported
  575. eth1: Operation not supported
  576. eth1: Operation not supported
  577. eth1: Operation not supported
  578. eth1: Operation not supported
  579. eth1: Operation not supported
  580. eth1: Operation not supported
  581. eth1: Operation not supported
  582. eth1: Operation not supported
  583. eth1: Operation not supported
  584. eth1: Operation not supported
  585. eth1: Operation not supported
  586. eth1: Operation not supported
  587. eth1: Operation not supported
  588. eth1: Operation not supported
  589. eth1: Operation not supported
  590. eth1: Operation not supported
  591. eth1: Operation not supported
  592. eth1: Operation not supported
  593. eth1: Operation not supported
  594. eth1: Operation not supported
  595. eth1: Operation not supported
  596. eth1: Operation not supported
  597. wl: Unsupported
  598. device eth1 entered promiscuous mode
  599. br0: Invalid argument
  600. eth2: Operation not supported
  601. wl1.1: No such device
  602. wl1.2: No such device
  603. wl1.3: No such device
  604. eth2: Operation not permitted
  605. eth2: Invalid argument
  606. eth2: Argument list too long
  607. eth2: Operation not supported
  608. eth2: Operation not supported
  609. eth2: Operation not supported
  610. eth2: Operation not supported
  611. eth2: Operation not supported
  612. eth2: Operation not supported
  613. eth2: Operation not supported
  614. eth2: Operation not supported
  615. eth2: Operation not supported
  616. eth2: Operation not supported
  617. eth2: Operation not supported
  618. eth2: Operation not supported
  619. eth2: Operation not supported
  620. eth2: Operation not supported
  621. eth2: Operation not supported
  622. eth2: Operation not supported
  623. eth2: Operation not supported
  624. eth2: Operation not supported
  625. eth2: Operation not supported
  626. eth2: Operation not supported
  627. eth2: Operation not supported
  628. eth2: Operation not supported
  629. eth2: Operation not supported
  630. eth2: Operation not supported
  631. eth2: Operation not supported
  632. eth2: Operation not supported
  633. eth2: Operation not supported
  634. eth2: Operation not supported
  635. eth2: Operation not supported
  636. eth2: Operation not supported
  637. eth2: Operation not supported
  638. wl: Unsupported
  639. device eth2 entered promiscuous mode
  640. /bin/sh: eadbr0: port 3(eth2) entered forwarding state
  641. : nbr0: port 3(eth2) entered forwarding state
  642. ot br0: port 2(eth1) entered forwarding state
  643. foubr0: port 2(eth1) entered forwarding state
  644. br0: port 1(vlan1) entered forwarding state
  645.  
  646. br0: port 1(vlan1) entered forwarding state
  647. device br0 left promiscuous mode
  648. device br0 entered promiscuous mode
  649. ifconfig: ioctl 0x8914 failed: Cannot assign requested address
  650. device br0 left promiscuous mode
  651. rmmod: bonding: No such file or directory
  652. function start_hwmon not found
  653. cp: can't stat '/tmp/mycron.d/*': No such file or directory
  654. cp: can't stat '/jffs/mycron.d/*': No such file or directory
  655. cp: can't stat '/mmc/mycron.d/*': No such file or directory
  656. rmmod: n_hdlc: No such file or directory
  657. device vlan2 entered promiscuous mode
  658. device vlan2 left promiscuous mode
  659. udhcpc (v1.22.1) started
  660. SIOCGIFFLAGS: No such device
  661. Sending discover...
  662. /bin/sh: /opt/etc/init.d/rcS: not found
  663. /bin/sh: /jffs/etc/init.d/rcS: not found
  664. /bin/sh: /mmc/etc/init.d/rcS: not found
  665. nvram was changed, needs commit, waiting 10 sec.
  666. deadlock detected, try to fix it
  667. rmmod: ipt_webstr: No such file or directory
  668. rmmod: ipt_layer7: No such file or directory
  669. rmmod: xt_layer7: No such file or directory
  670. rmmod: ipt_ipp2p: No such file or directory
  671. rmmod: xt_ipp2p: No such file or directory
  672. The Milkfish Router Services
  673. ERROR: Necessary service setting not found: milkfish_username - aborting.
  674. rmmod: xt_physdev: No such file or directory
  675. rmmod: xt_IMQ: No such file or directory
  676. rmmod: ipt_IMQ: No such file or directory
  677. rmmod: imq: No such file or directory
  678. rmmod: sch_codel: No such file or directory
  679. rmmod: sch_fq_codel: No such file or directory
  680. The Milkfish Router Services
  681. Restoring SIP ddsubscriber database from NVRAM...
  682. Empty.
  683. The Milkfish Router Services
  684. Restoring SIP ddaliases database from NVRAM...
  685. Empty.
  686. killall: proxywatchdog.sh: no process killed
  687. umount: can't umount /mnt/smbshare: No such file or directory
  688. rmmod: cifs: No such file or directory
  689. rmmod: fscache: No such file or directory
  690. killall: schedulerb.sh: no process killed
  691. killall: shatd: no process killed
  692. killall: wdswatchdog.sh: no process killed
  693. Sending discover...
  694. Sending discover...
  695. br0: port 3(eth2) entered forwarding state
  696. br0: port 2(eth1) entered forwarding state
  697. br0: port 1(vlan1) entered forwarding state
  698. Sending discover...
  699. Sending discover...
  700. Sending discover...
  701. Sending discover...
  702. Sending discover...
  703. Sending discover...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!