API tools faq
paste
reisei

Untitled

reisei
Jan 27th, 2012
137
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.18 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.0.13 (chapkinav@t-chapkin) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #0 SMP PREEMPT Wed Jan 25 13:16:31 MSK 2012 ()
  2. [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d
  3. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  4. [ 0.000000] Machine: OMAP4 Panda board
  5. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  6. [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  8. [ 0.000000] OMAP4430 ES2.1
  9. [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
  10. [ 0.000000] On node 0 totalpages: 239616
  11. [ 0.000000] free_area_init_node: node 0, pgdat c07ae340, node_mem_map c0bfd000
  12. [ 0.000000] Normal zone: 1536 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 180736 pages, LIFO batch:31
  15. [ 0.000000] HighMem zone: 512 pages used for memmap
  16. [ 0.000000] HighMem zone: 56832 pages, LIFO batch:15
  17. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c140d000 s6976 r8192 d13504 u32768
  18. [ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  20. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 237568
  21. [ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 omapdss.def_disp=dvi omapfb.mode=1280x800-32@60 psplash=false consoleblank=0 mem=456M@0x80000000 mem=512M@0xA0000000 omapdss.debug=y omapfb.debug=y drm.debug=7
  22. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 456MB 480MB = 936MB total
  26. [ 0.000000] Memory: 937528k/937528k available, 53704k reserved, 229376K highmem
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  30. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  31. [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
  32. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  33. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  34. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  35. [ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
  36. [ 0.000000] .text : 0xc004d000 - 0xc0725e2c (7012 kB)
  37. [ 0.000000] .data : 0xc0726000 - 0xc07afc20 ( 552 kB)
  38. [ 0.000000] .bss : 0xc07afc44 - 0xc0bfcc6c (4405 kB)
  39. [ 0.000000] Preemptible hierarchical RCU implementation.
  40. [ 0.000000] NR_IRQS:410
  41. [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  42. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  43. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  44. [ 0.000000] Console: colour dummy device 80x30
  45. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  46. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  47. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  48. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  49. [ 0.000000] ... CLASSHASH_SIZE: 4096
  50. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  51. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  52. [ 0.000000] ... CHAINHASH_SIZE: 16384
  53. [ 0.000000] memory used by lock dependency info: 3679 kB
  54. [ 0.000000] per task-struct memory footprint: 1152 bytes
  55. [ 0.000000] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
  56. [ 0.070373] pid_max: default: 32768 minimum: 301
  57. [ 0.070770] Security Framework initialized
  58. [ 0.070983] Mount-cache hash table entries: 512
  59. [ 0.070983] CPU: Testing write buffer coherency: ok
  60. [ 0.073150] twd_timer_setup: no clock found
  61. [ 0.073364] Calibrating local timer... 491.68MHz.
  62. [ 0.117492] L310 cache controller enabled
  63. [ 0.117492] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
  64. [ 0.194122] CPU1: Booted secondary processor
  65. [ 0.262420] Brought up 2 CPUs
  66. [ 0.262420] SMP: Total of 2 processors activated (3972.37 BogoMIPS).
  67. [ 0.262756] devtmpfs: initialized
  68. [ 0.270477] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
  69. [ 0.270599] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
  70. [ 0.270599] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
  71. [ 0.270629] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
  72. [ 0.270629] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
  73. [ 0.270629] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
  74. [ 0.270629] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  75. [ 0.270690] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  76. [ 0.270690] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
  77. [ 0.270721] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
  78. [ 0.270782] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
  79. [ 0.271026] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  80. [ 0.287780] omap_hwmod: ipu: failed to hardreset
  81. [ 0.293731] omap_hwmod: mcpdm: cannot be enabled (3)
  82. [ 0.296936] print_constraints: dummy:
  83. [ 0.296936] NET: Registered protocol family 16
  84. [ 0.298095] GPMC revision 6.0
  85. [ 0.303405] omap_device: omap_gpio.0: new worst case activate latency 0: 122070
  86. [ 0.304077] OMAP GPIO hardware version 0.1
  87. [ 0.304656] OMAP GPIO hardware version 0.1
  88. [ 0.304992] OMAP GPIO hardware version 0.1
  89. [ 0.305297] omap_device: omap_gpio.3: new worst case activate latency 0: 305175
  90. [ 0.305816] OMAP GPIO hardware version 0.1
  91. [ 0.306121] OMAP GPIO hardware version 0.1
  92. [ 0.306701] OMAP GPIO hardware version 0.1
  93. [ 0.309967] omap_mux_init: Add partition: #1: core, flags: 2
  94. [ 0.310974] omap_mux_init: Add partition: #2: wkup, flags: 2
  95. [ 0.314086] omap_device: omap_uart.0: new worst case activate latency 0: 61035
  96. [ 0.314636] omap_device: omap_uart.1: new worst case activate latency 0: 122070
  97. [ 0.315795] omap_device: omap_uart.3: new worst case deactivate latency 0: 30517
  98. [ 0.331970] pm_dbg_init: only OMAP3 supported
  99. [ 0.332305] omap_ipussdev_init: could not look up iss
  100. [ 0.334533] OMAP DMA hardware revision 0.0
  101. [ 0.367187] bio: create slab <bio-0> at 0
  102. [ 0.368682] print_constraints: vwl1271: 1800 mV
  103. [ 0.371765] SCSI subsystem initialized
  104. [ 0.372039] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
  105. [ 0.372497] omap_device: omap2_mcspi.2: new worst case activate latency 0: 183105
  106. [ 0.373168] omap_device: omap2_mcspi.3: new worst case deactivate latency 0: 30517
  107. [ 0.374847] usbcore: registered new interface driver usbfs
  108. [ 0.375274] usbcore: registered new interface driver hub
  109. [ 0.375579] usbcore: registered new device driver usb
  110. [ 0.377899] omap_device: omap_i2c.1: new worst case activate latency 0: 91552
  111. [ 0.391906] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
  112. [ 0.393707] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  113. [ 0.394195] twl6030: PIH (irq 39) chaining IRQs 368..387
  114. [ 0.395629] print_constraints: VUSB: 3300 mV normal standby
  115. [ 0.594238] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  116. [ 0.594299] twl6030: Interrupt status 0x040000
  117. [ 0.595581] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  118. [ 0.596527] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  119. [ 0.597290] print_constraints: VCXIO: 1800 mV normal standby
  120. [ 0.598022] print_constraints: VDAC: 1800 mV normal standby
  121. [ 0.598937] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  122. [ 0.599761] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  123. [ 0.600555] print_constraints: CLK32KG:
  124. [ 0.601287] print_constraints: VANA: 2100 mV normal standby
  125. [ 0.601501] omap_device: omap_i2c.2: new worst case activate latency 0: 213623
  126. [ 0.612884] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  127. [ 0.620971] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  128. [ 0.643432] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
  129. [ 0.645202] Advanced Linux Sound Architecture Driver Version 1.0.24.
  130. [ 0.647613] cfg80211: Calling CRDA to update world regulatory domain
  131. [ 0.649414] Switching to clocksource 32k_counter
  132. [ 0.651000] Switched to NOHz mode on CPU #0
  133. [ 0.651458] Switched to NOHz mode on CPU #1
  134. [ 0.694305] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
  135. [ 0.694488] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
  136. [ 0.694519] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  137. [ 0.694641] musb-hdrc: MHDRC RTL version 2.0
  138. [ 0.694641] musb-hdrc: setup fifo_mode 4
  139. [ 0.694671] musb-hdrc: 28/31 max ep, 16384/16384 memory
  140. [ 0.694671] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  141. [ 0.695159] NET: Registered protocol family 2
  142. [ 0.695678] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  143. [ 0.695678] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  144. [ 0.699493] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
  145. [ 0.699493] TCP: Hash tables configured (established 131072 bind 65536)
  146. [ 0.708038] TCP reno registered
  147. [ 0.708038] UDP hash table entries: 512 (order: 3, 49152 bytes)
  148. [ 0.708038] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
  149. [ 0.708679] NET: Registered protocol family 1
  150. [ 0.709838] RPC: Registered named UNIX socket transport module.
  151. [ 0.709838] RPC: Registered udp transport module.
  152. [ 0.709869] RPC: Registered tcp transport module.
  153. [ 0.709869] RPC: Registered tcp NFSv4.1 backchannel transport module.
  154. [ 0.709869] NetWinder Floating Point Emulator V0.97 (double precision)
  155. [ 0.792755] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
  156. [ 0.792755] ipu-power initialized ipu, major: 253, minor: 0
  157. [ 0.793426] omap-iommu omap-iommu.0: ducati registered
  158. [ 0.793426] omap-iommu omap-iommu.1: tesla registered
  159. [ 0.794464] iovmm-omap initialized ducati, major: 252, base-minor: 0
  160. [ 0.794952] iovmm-omap initialized tesla, major: 252, base-minor: 1
  161. [ 0.795623] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
  162. [ 0.796020] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 251, base-minor: 0
  163. [ 0.796020] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
  164. [ 0.796508] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 251, base-minor: 1
  165. [ 0.796569] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
  166. [ 0.796936] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 251, base-minor: 2
  167. [ 0.935760] highmem bounce pool size: 64 pages
  168. [ 0.936065] VFS: Disk quotas dquot_6.5.2
  169. [ 0.936187] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  170. [ 0.937347] Installing knfsd (copyright (C) 1996 [email protected]).
  171. [ 0.937347] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  172. [ 0.937347] ROMFS MTD (C) 2007 Red Hat, Inc.
  173. [ 0.938171] msgmni has been set to 1383
  174. [ 0.940093] io scheduler noop registered
  175. [ 0.940216] io scheduler deadline registered
  176. [ 0.940307] io scheduler cfq registered (default)
  177. [ 0.942077] omapdss DSS: clk ick, rate 200000000
  178. [ 0.942077] omapdss DSS: clk fck, rate 170666666
  179. [ 0.942108] omapdss DSS: clk sys_clk, rate 38400000
  180. [ 0.942138] omapdss DSS: clk tv_clk, rate 59000000
  181. [ 0.942138] omapdss DSS: clk video_clk, rate 48000000
  182. [ 0.942199] omapdss DSS: initial ctx id 0
  183. [ 1.008422] OMAP DSS rev 4.0
  184. [ 1.010711] omapdss CORE: bus_match. dev display0/hdmi_panel, drv generic_dpi_panel
  185. [ 1.010711] omapdss CORE: bus_match. dev display1/generic_dpi_panel, drv generic_dpi_panel
  186. [ 1.010711] omapdss CORE: driver_probe: dev display1/generic_dpi_panel, drv generic_dpi_panel
  187. [ 1.010772] omapdss DPI: init_display
  188. [ 1.010925] omapdss CORE: probe done for device display1
  189. [ 1.011138] omapdss CORE: bus_match. dev display0/hdmi_panel, drv taal
  190. [ 1.011199] omapdss CORE: bus_match. dev display1/generic_dpi_panel, drv taal
  191. [ 1.011871] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  192. [ 1.501464] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  193. [ 1.631347] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  194. [ 1.751464] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  195. [ 2.795593] console [ttyO2] enabled
  196. [ 2.884002] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  197. [ 3.033020] [drm] Initialized drm 1.1.0 20060810
  198. [ 3.054107] brd: module loaded
  199. [ 3.065826] loop: module loaded
  200. [ 3.069732] omap_device: omap_i2c.1: new worst case activate latency 0: 274658
  201. [ 3.078125] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  202. [ 3.086395] omap_device: omap_i2c.1: new worst case deactivate latency 0: 91552
  203. [ 3.096954] mtdoops: mtd device (mtddev=name/number) must be supplied
  204. [ 3.104278] omap2-nand driver initializing
  205. [ 3.108886] OneNAND driver initializing
  206. [ 3.116516] usbcore: registered new interface driver asix
  207. [ 3.122650] usbcore: registered new interface driver cdc_ether
  208. [ 3.129058] usbcore: registered new interface driver smsc95xx
  209. [ 3.135314] usbcore: registered new interface driver net1080
  210. [ 3.141479] usbcore: registered new interface driver cdc_subset
  211. [ 3.147918] usbcore: registered new interface driver zaurus
  212. [ 3.153778] cdc_ncm: 04-Aug-2011
  213. [ 3.157562] usbcore: registered new interface driver cdc_ncm
  214. [ 3.164123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  215. [ 3.171142] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
  216. [ 3.179748] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  217. [ 3.186676] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  218. [ 3.194427] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
  219. [ 3.212677] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  220. [ 3.218994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  221. [ 3.226104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  222. [ 3.233673] usb usb1: Product: OMAP-EHCI Host Controller
  223. [ 3.239257] usb usb1: Manufacturer: Linux 3.0.13 ehci_hcd
  224. [ 3.244964] usb usb1: SerialNumber: ehci-omap.0
  225. [ 3.251220] hub 1-0:1.0: USB hub found
  226. [ 3.251220] hub 1-0:1.0: 3 ports detected
  227. [ 3.498229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  228. [ 3.504852] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
  229. [ 3.511627] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
  230. [ 3.519561] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
  231. [ 3.622039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  232. [ 3.629150] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  233. [ 3.636749] usb usb2: Product: OMAP3 OHCI Host Controller
  234. [ 3.636749] usb usb2: Manufacturer: Linux 3.0.13 ohci_hcd
  235. [ 3.636749] usb usb2: SerialNumber: ohci-omap3.0
  236. [ 3.653991] hub 2-0:1.0: USB hub found
  237. [ 3.658264] hub 2-0:1.0: 3 ports detected
  238. [ 3.663696] usbcore: registered new interface driver cdc_wdm
  239. [ 3.669616] Initializing USB Mass Storage driver...
  240. [ 3.675048] usbcore: registered new interface driver usb-storage
  241. [ 3.681396] USB Mass Storage support registered.
  242. [ 3.686614] usbcore: registered new interface driver libusual
  243. [ 3.729888] usb 1-1: new high speed USB device number 2 using ehci-omap
  244. [ 3.907287] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  245. [ 3.914306] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  246. [ 3.922851] hub 1-1:1.0: USB hub found
  247. [ 3.927001] hub 1-1:1.0: 5 ports detected
  248. [ 3.933197] usbcore: registered new interface driver usbtest
  249. [ 3.939971] mousedev: PS/2 mouse device common for all mice
  250. [ 3.948364] omap_device: omap_i2c.1: new worst case activate latency 0: 335693
  251. [ 3.956970] omap_device: omap_i2c.1: new worst case deactivate latency 0: 183105
  252. [ 3.965148] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  253. [ 3.971862] twl_rtc twl_rtc: Power up reset detected.
  254. [ 3.977172] omap_device: omap_i2c.1: new worst case activate latency 0: 3082275
  255. [ 3.985931] twl_rtc twl_rtc: Enabling TWL-RTC.
  256. [ 3.990600] omap_device: omap_i2c.1: new worst case activate latency 0: 4669189
  257. [ 3.998748] i2c /dev entries driver
  258. [ 4.004882] lirc_dev: IR Remote Control driver registered, major 248
  259. [ 4.011627] IR NEC protocol handler initialized
  260. [ 4.016448] IR RC5(x) protocol handler initialized
  261. [ 4.017578] IR RC6 protocol handler initialized
  262. [ 4.024353] IR JVC protocol handler initialized
  263. [ 4.030975] IR Sony protocol handler initialized
  264. [ 4.035858] IR RC5 (streamzap) protocol handler initialized
  265. [ 4.041778] IR LIRC bridge handler initialized
  266. [ 4.046447] Linux video capture interface: v2.00
  267. [ 4.054779] Driver for 1-wire Dallas network protocol.
  268. [ 4.061065] omap_device: omap_wdt.-1: new worst case activate latency 0: 213623
  269. [ 4.069396] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  270. [ 4.075744] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 3204345
  271. [ 4.084228] cpuidle: using governor ladder
  272. [ 4.088623] cpuidle: using governor menu
  273. [ 4.095733] twl6030: Interrupt status 0x000800
  274. [ 4.100677] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
  275. [ 4.111389] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
  276. [ 4.121978] usbcore: registered new interface driver usbhid
  277. [ 4.127838] usbhid: USB HID core driver
  278. [ 4.134033] proc4430_drv_initializeModule
  279. [ 4.139709] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
  280. [ 4.148834] omap-devh initialized Tesla, major: 242, base-minor: 0
  281. [ 4.156066] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
  282. [ 4.164916] omap-devh initialized SysM3, major: 242, base-minor: 1
  283. [ 4.172088] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
  284. [ 4.184082] omap-devh initialized AppM3, major: 242, base-minor: 2
  285. [ 4.196289] SDP4430 SoC init
  286. [ 4.201263] omap_device: aess.-1: new worst case activate latency 0: 30517
  287. [ 4.237152] omap_device: omap-mcpdm.-1: new worst case activate latency 0: 30517
  288. [ 4.245025] omap_device: omap-mcpdm.-1: new worst case deactivate latency 0: 91552
  289. [ 4.249084] usb 1-1.1: new high speed USB device number 3 using ehci-omap
  290. [ 4.260742] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  291. [ 4.268188] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  292. [ 4.276184] asoc: null-codec-dai <-> Voice mapping ok
  293. [ 4.282653] asoc: null-codec-dai <-> Tones mapping ok
  294. [ 4.288818] asoc: null-codec-dai <-> Vibra mapping ok
  295. [ 4.295593] asoc: null-codec-dai <-> MODEM mapping ok
  296. [ 4.301788] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
  297. [ 4.308654] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  298. [ 4.316314] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
  299. [ 4.323638] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
  300. [ 4.332580] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
  301. [ 4.342498] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
  302. [ 4.348846] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
  303. [ 4.355041] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
  304. [ 4.361480] asoc: twl6040-vib <-> mcpdm-vib mapping ok
  305. [ 4.367492] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
  306. [ 4.374481] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
  307. [ 4.380523] mmc0: host does not support reading read-only switch. assuming write-enable.
  308. [ 4.389160] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  309. [ 4.389221] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
  310. [ 4.390228] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
  311. [ 4.391143] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
  312. [ 4.392120] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
  313. [ 4.398498] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0
  314. [ 4.406036] ALSA device list:
  315. [ 4.406097] #0: TI OMAP4 Board
  316. [ 4.406097] oprofile: hardware counters not available
  317. [ 4.406097] oprofile: using timer interrupt.
  318. [ 4.444976] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  319. [ 4.444976] TCP cubic registered
  320. [ 4.445220] Initializing XFRM netlink socket
  321. [ 4.445220] NET: Registered protocol family 17
  322. [ 4.445220] NET: Registered protocol family 15
  323. [ 4.445526] lib80211: common routines for IEEE802.11 drivers
  324. [ 4.445526] lib80211_crypt: registered algorithm 'NULL'
  325. [ 4.445587] Registering the dns_resolver key type
  326. [ 4.445587] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  327. [ 4.483520] mmc0: new SD card at address e624
  328. [ 4.493286] ThumbEE CPU extension supported.
  329. [ 4.493347] Registering SWP/SWPB emulation handler
  330. [ 4.503601] mmcblk0: mmc0:e624 SU02G 1.84 GiB
  331. [ 4.507934] smsc95xx v1.0.4
  332. [ 4.509460] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
  333. [ 4.509552] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
  334. [ 4.509552]
  335. [ 4.511657] Power Management for TI OMAP4.
  336. [ 4.511901] sr_init: No PMIC hook to init smartreflex
  337. [ 4.512237] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  338. [ 4.512237] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  339. [ 4.512664] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
  340. [ 4.513061] SmartReflex Class3 initialized
  341. [ 4.566894] regulator_init_complete: VANA: incomplete constraints, leaving on
  342. [ 4.575164] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
  343. [ 4.583190] mmcblk0: p1 p2
  344. [ 4.584014] regulator_init_complete: VDAC: incomplete constraints, leaving on
  345. [ 4.584381] regulator_init_complete: VCXIO: incomplete constraints, leaving on
  346. [ 4.585083] regulator_init_complete: VUSB: incomplete constraints, leaving on
  347. [ 4.608612] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  348. [ 4.617279] [drm:omap_drm_init], init
  349. [ 4.617675] [drm:pdev_probe], omapdrm
  350. [ 4.617675] [drm:drm_platform_init],
  351. [ 4.617706] [drm:drm_get_platform_dev],
  352. [ 4.617889] [drm:drm_get_minor],
  353. [ 4.641235] [drm:drm_get_minor], new minor assigned 64
  354. [ 4.641357] [drm:drm_get_minor],
  355. [ 4.641906] [drm:drm_get_minor], new minor assigned 0
  356. [ 4.641937] [drm:dev_load], load: dev=ef1a6800
  357. [ 4.642242] [drm:omap_encoder_init], lcd
  358. [ 4.642272] omapdss MANAGER: omap_dss_mgr_apply(lcd)
  359. [ 4.642272] omapdss MANAGER: configure_manager(2)
  360. [ 4.642486] [drm:omap_encoder_init], tv
  361. [ 4.642486] omapdss MANAGER: omap_dss_mgr_apply(tv)
  362. [ 4.642547] [drm:omap_encoder_init], lcd2
  363. [ 4.642547] omapdss MANAGER: omap_dss_mgr_apply(lcd2)
  364. [ 4.642578] omapdss MANAGER: configure_manager(2)
  365. [ 4.642700] omapdrm omapdrm.0: hdmi has no driver.. skipping it
  366. [ 4.648956] [drm:omap_connector_init], dvi
  367. [ 4.649017] [drm:drm_sysfs_connector_add], adding "DVI-D-1" to sysfs
  368. [ 4.649291] [drm:drm_sysfs_hotplug_event], generating hotplug event
  369. [ 4.649688] omapdss DISPC: onoff 0 rf 0 ieo 0 ipc 0 ihs 0 ivs 0 acbi 0 acb 0
  370. [ 4.649688] omapdss DSS: dpll4_m4 = 1536000000
  371. [ 4.649688] omapdss DSS: fck = 69818181 (22)
  372. [ 4.649749] omapdss DISPC: lck = 69818181 (1)
  373. [ 4.649749] omapdss DISPC: pck = 69818181 (1)
  374. [ 4.649749] omapdss DPI: Could not find exact pixel clock. Requested 68930 kHz, got 69818 kHz
  375. [ 4.658782] omapdss DISPC: channel 2 xres 1280 yres 800
  376. [ 4.658782] omapdss DISPC: pck 69818
  377. [ 4.658813] omapdss DISPC: hsw 40 hfp 48 hbp 80 vsw 10 vfp 3 vbp 3
  378. [ 4.658813] omapdss DISPC: hsync 48216Hz, vsync 59Hz
  379. [ 4.663269] [drm:create_crtc], disconnecting gfx from lcd2
  380. [ 4.663299] [drm:omap_connector_attached_encoder], dvi: found lcd2
  381. [ 4.663299] [drm:create_crtc], connecting gfx to lcd2
  382. [ 4.663330] [drm:omap_crtc_init], gfx
  383. [ 4.663330] [drm:omap_modeset_init], lcd: possible_crtcs=00000000
  384. [ 4.663360] [drm:omap_modeset_init], tv: possible_crtcs=00000000
  385. [ 4.663360] [drm:omap_modeset_init], lcd2: possible_crtcs=00000001
  386. [ 4.663391] [drm:dump_video_chains], dumping video chains:
  387. [ 4.663391] [drm:dump_video_chains], 0: gfx -> lcd2 -> dvi
  388. [ 4.663391] [drm:dump_video_chains], 1: vid1 -> lcd2 -> dvi
  389. [ 4.663421] [drm:dump_video_chains], 2: vid2 -> lcd2 -> dvi
  390. [ 4.663421] [drm:omap_encoder_dpms], lcd: 3
  391. [ 4.663452] [drm:omap_encoder_dpms], tv: 3
  392. [ 4.663452] [drm:omap_encoder_dpms], lcd2: 3
  393. [ 4.663482] [drm:omap_crtc_dpms], gfx: 3
  394. [ 4.663482] [drm:commit], gfx
  395. [ 4.663482] [drm:commit], 0x0 -> 0x0 (0)
  396. [ 4.663513] [drm:commit], 0,0 (null) 00000000
  397. [ 4.663513] omapdss MANAGER: omap_dss_mgr_apply(lcd2)
  398. [ 4.663513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:DVI-D-1]
  399. [ 4.663787] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0e:40:6f:f9:6c:0a
  400. [ 4.676361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:6:DVI-D-1] disconnected
  401. [ 4.676391] No connectors reported connected with modes
  402. [ 4.681488] [drm:drm_setup_crtcs],
  403. [ 4.681884] [drm:drm_enable_connectors], connector 6 enabled? no
  404. [ 4.681884] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
  405. [ 4.681915] [drm] Cannot find any crtc or sizes - going 1024x768
  406. [ 4.688415] [drm:omap_fbdev_create], create fbdev: 1024x768@32
  407. [ 4.688446] [drm:omap_fbdev_create], fbi=ef1ac000, dev=ef1a6800
  408. [ 4.688446] [drm:omap_framebuffer_init], create framebuffer: dev=ef1a6800, mode_cmd=ef833e00 (1024x768)
  409. [ 4.688476] [drm:omap_framebuffer_init], create: FB ID: 8 (ef1a7e00)
  410. [ 4.688537] [drm:omap_framebuffer_init], allocating 3145728 bytes for fb 0
  411. [ 4.720916] [drm:omap_fbdev_create], par=ef1a9c20, 1024x768
  412. [ 4.720916] [drm:omap_fbdev_create], allocated 1024x768 fb
  413. [ 4.721984] [drm:drm_crtc_helper_set_config],
  414. [ 4.722045] [drm:drm_crtc_helper_set_config], [CRTC:7] [NOFB]
  415. [ 4.722045] [drm:omap_crtc_load_lut], gfx
  416. [ 4.722045] [drm:omap_crtc_load_lut], gfx
  417. [ 4.729370] Console: switching to colour frame buffer device 128x96
  418. [ 4.729370] [drm:omap_crtc_load_lut], gfx
  419. [ 4.736816] [drm:omap_crtc_load_lut], gfx
  420. [ 4.749694] fb0: omapdrm frame buffer device
  421. [ 4.754150] drm: registered panic notifier
  422. [ 4.758514] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  423. [ 4.765441] [drm] No driver support for vblank timestamp query.
  424. [ 4.771697] [drm] Initialized omapdrm 1.0.0 20110403 on minor 0
  425. [ 4.778350] mmc1: card claims to support voltages below the defined range. These will be ignored.
  426. [ 4.796112] EXT3-fs: barriers not enabled
  427. [ 4.814880] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  428. [ 4.821777] mmc1: new SDIO card at address 0001
  429. [ 4.994659] kjournald starting. Commit interval 5 seconds
  430. [ 4.994750] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
  431. [ 4.999298] EXT3-fs (mmcblk0p2): using internal journal
  432. [ 4.999359] EXT3-fs (mmcblk0p2): recovery complete
  433. [ 5.005035] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  434. [ 5.005035] VFS: Mounted root (ext3 filesystem) on device 179:2.
  435. [ 5.009246] devtmpfs: mounted
  436. [ 5.009613] Freeing init memory: 276K
  437. [ 6.847229] wl1271: ERROR could not get nvs file: -2
  438. [ 6.852752] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  439. [ 6.852752] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  440. [ 6.852783] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  441. [ 6.852783] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  442. [ 6.852813] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  443. [ 6.852813] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  444. [ 6.852844] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  445. [ 6.852844] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  446. [ 6.852874] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  447. [ 6.852874] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  448. [ 6.852874] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  449. [ 6.852905] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  450. [ 6.852905] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  451. [ 6.852935] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  452. [ 6.852935] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  453. [ 6.852966] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  454. [ 6.852966] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  455. [ 6.852996] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  456. [ 6.852996] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  457. [ 6.852996] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  458. [ 6.853027] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  459. [ 6.853027] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
  460. [ 6.853057] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  461. [ 6.853057] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
  462. [ 6.853057] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  463. [ 6.853088] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
  464. [ 6.853088] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  465. [ 6.853118] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
  466. [ 6.853118] cfg80211: Disabling freq 5035 MHz
  467. [ 6.853118] cfg80211: Disabling freq 5040 MHz
  468. [ 6.853149] cfg80211: Disabling freq 5045 MHz
  469. [ 6.853149] cfg80211: Disabling freq 5055 MHz
  470. [ 6.853149] cfg80211: Disabling freq 5060 MHz
  471. [ 6.853179] cfg80211: Disabling freq 5080 MHz
  472. [ 6.853179] cfg80211: Disabling freq 5170 MHz
  473. [ 6.853179] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
  474. [ 6.853210] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  475. [ 6.853210] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
  476. [ 6.853240] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  477. [ 6.853240] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
  478. [ 6.853271] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  479. [ 6.853271] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
  480. [ 6.853271] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  481. [ 6.853302] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
  482. [ 6.853302] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  483. [ 6.853332] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
  484. [ 6.853332] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  485. [ 6.853363] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
  486. [ 6.853363] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm)
  487. [ 6.853363] cfg80211: Disabling freq 5260 MHz
  488. [ 6.853393] cfg80211: Disabling freq 5280 MHz
  489. [ 6.853393] cfg80211: Disabling freq 5300 MHz
  490. [ 6.853393] cfg80211: Disabling freq 5320 MHz
  491. [ 6.853424] cfg80211: Disabling freq 5500 MHz
  492. [ 6.853424] cfg80211: Disabling freq 5520 MHz
  493. [ 6.853424] cfg80211: Disabling freq 5540 MHz
  494. [ 6.853454] cfg80211: Disabling freq 5560 MHz
  495. [ 6.853454] cfg80211: Disabling freq 5580 MHz
  496. [ 6.853454] cfg80211: Disabling freq 5600 MHz
  497. [ 6.853454] cfg80211: Disabling freq 5620 MHz
  498. [ 6.853485] cfg80211: Disabling freq 5640 MHz
  499. [ 6.853485] cfg80211: Disabling freq 5660 MHz
  500. [ 6.853485] cfg80211: Disabling freq 5680 MHz
  501. [ 6.853515] cfg80211: Disabling freq 5700 MHz
  502. [ 6.853515] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
  503. [ 6.853546] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
  504. [ 6.853546] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
  505. [ 6.853546] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
  506. [ 6.853576] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
  507. [ 6.853576] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
  508. [ 6.853607] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
  509. [ 6.853607] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
  510. [ 6.853637] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
  511. [ 6.853637] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm)
  512. [ 6.858154] wl1271: loaded
  513. [ 6.860290] wl1271: initialized
  514. [ 7.629486] omap_device: aess.-1: new worst case activate latency 0: 640869
  515. [ 7.637023] omap_device: aess.-1: new worst case deactivate latency 0: 30517
  516. [ 9.326171] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!