Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@untest:~# sensors-detect
- # sensors-detect version 3.6.0
- # System: ASUS All Series
- # Board: ASUSTeK COMPUTER INC. X99-E WS
- # Kernel: 5.10.1-Unraid x86_64
- # Processor: Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz (6/63/2)
- This program will help you determine which kernel modules you need
- to load to use lm_sensors most effectively. It is generally safe
- and recommended to accept the default answers to all questions,
- unless you know what you're doing.
- Some south bridges, CPUs or memory controllers contain embedded sensors.
- Do you want to scan for them? This is totally safe. (YES/no):
- Silicon Integrated Systems SIS5595... No
- VIA VT82C686 Integrated Sensors... No
- VIA VT8231 Integrated Sensors... No
- AMD K8 thermal sensors... No
- AMD Family 10h thermal sensors... No
- AMD Family 11h thermal sensors... No
- AMD Family 12h and 14h thermal sensors... No
- AMD Family 15h thermal sensors... No
- AMD Family 16h thermal sensors... No
- AMD Family 17h thermal sensors... No
- AMD Family 15h power sensors... No
- AMD Family 16h power sensors... No
- Hygon Family 18h thermal sensors... No
- Intel digital thermal sensor... Success!
- (driver `coretemp')
- Intel AMB FB-DIMM thermal sensor... No
- Intel 5500/5520/X58 thermal sensor... No
- VIA C7 thermal sensor... No
- VIA Nano thermal sensor... No
- Some Super I/O chips contain embedded sensors. We have to write to
- standard I/O ports to probe them. This is usually safe.
- Do you want to scan for Super I/O sensors? (YES/no):
- Probing for Super-I/O at 0x2e/0x2f
- Trying family `National Semiconductor/ITE'... No
- Trying family `SMSC'... No
- Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
- Found `Nuvoton NCT6791D Super IO Sensors' Success!
- (address 0x290, driver `nct6775')
- Probing for Super-I/O at 0x4e/0x4f
- Trying family `National Semiconductor/ITE'... No
- Trying family `SMSC'... No
- Trying family `VIA/Winbond/Nuvoton/Fintek'... No
- Trying family `ITE'... No
- Some systems (mainly servers) implement IPMI, a set of common interfaces
- through which system health data may be retrieved, amongst other things.
- We first try to get the information from SMBIOS. If we don't find it
- there, we have to read from arbitrary I/O ports to probe for such
- interfaces. This is normally safe. Do you want to scan for IPMI
- interfaces? (YES/no):
- Probing for `IPMI BMC KCS' at 0xca0... No
- Probing for `IPMI BMC SMIC' at 0xca8... No
- Some hardware monitoring chips are accessible through the ISA I/O ports.
- We have to write to arbitrary I/O ports to probe them. This is usually
- safe though. Yes, you do have ISA I/O ports even if you do not have any
- ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes
- Probing for `National Semiconductor LM78' at 0x290... No
- Probing for `National Semiconductor LM79' at 0x290... No
- Probing for `Winbond W83781D' at 0x290... No
- Probing for `Winbond W83782D' at 0x290... No
- Lastly, we can probe the I2C/SMBus adapters for connected hardware
- monitoring devices. This is the most risky part, and while it works
- reasonably well on most systems, it has been reported to cause trouble
- on some systems.
- Do you want to probe the I2C/SMBus adapters now? (YES/no):
- Using driver `i2c-i801' for device 0000:00:1f.3: Wellsburg (PCH)
- Module i2c-dev loaded successfully.
- Next adapter: SMBus I801 adapter at 0580 (i2c-0)
- Do you want to scan it? (YES/no/selectively):
- Now follows a summary of the probes I have just done.
- Just press ENTER to continue:
- Driver `nct6775':
- * ISA bus, address 0x290
- Chip `Nuvoton NCT6791D Super IO Sensors' (confidence: 9)
- Driver `coretemp':
- * Chip `Intel digital thermal sensor' (confidence: 9)
- Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yes
- Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
- for initialization at boot time.
- You should now start the lm_sensors service to load the required
- kernel modules.
- Unloading i2c-dev... OK
Add Comment
Please, Sign In to add comment