API tools faq
paste
Advertisement
Guest User

Beelink GT1 Ultimate boot log

a guest
Mar 15th, 2019
599
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 59.35 KB | None | 0 0
raw download clone embed print report
  1. exit_reason:0x02
  2.  
  3. set vddee to 0x03e8mv
  4.  
  5. set vdd_cpu a to 0x0460mv
  6.  
  7. set vdd_cpu a to 0x041amv
  8.  
  9. store restore gp0 pll
  10.  
  11.  
  12. gp0 pll can't lock
  13.  
  14.  
  15. read gp0_ctrl 40000000
  16.  
  17.  
  18. read gp0_ctrl2 0
  19.  
  20.  
  21. read gp0_ctrl3 0
  22.  
  23.  
  24. read gp0_ctrl4 0
  25.  
  26.  
  27. Enter ddr resume
  28.  
  29.  
  30. ddr resume time: 373us
  31.  
  32.  
  33. cfg15 3b08000
  34.  
  35.  
  36. cfg15 23b08000
  37.  
  38.  
  39. BL1:dc8b51:76f1a5;FEA▒GXM:BL1:dc8b51:76f1a5;FEAT:ADFD318C:80;POC:3;RCY:0;EMMC:0; READ:0;0.0;CHK:0;
  40.  
  41. TE: 42009
  42.  
  43.  
  44.  
  45. BL2 Built : 17:47:29, Jul 11 2017.
  46.  
  47. gxl gcb74862-dirty - jiaxing.ye@droid05
  48.  
  49.  
  50.  
  51. set vdd cpu_a to 1120 mv
  52.  
  53. set vdd cpu_b to 1050 mv
  54.  
  55. set vddee to 1000 mv
  56.  
  57. Board ID = 1
  58.  
  59. CPU clk: 1200MHz
  60.  
  61. DQS-corr enabled
  62.  
  63. DDR scramble enabled
  64.  
  65. STICKY_REG0: 0x00000000
  66.  
  67. STICKY_REG1: 0x00000000
  68.  
  69. STICKY_REG9: 0x00000000
  70.  
  71. LPDDR3 chl: Rank0+1 @ 744MHz
  72.  
  73. Rank0: 2048MB-2T-3
  74.  
  75. Rank1: 1024MB-2T-3
  76.  
  77. DataBus test pass!
  78.  
  79. AddrBus test pass!
  80.  
  81. -s
  82.  
  83. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  84.  
  85. New fip structure!
  86.  
  87. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  88.  
  89. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  90.  
  91. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00065a00
  92.  
  93. NOTICE: BL3-1: v1.0(release):35dd647
  94.  
  95. NOTICE: BL3-1: Built : 15:20:30, Feb 7 2018
  96.  
  97. NOTICE: BL31: BL33 decompress pass
  98.  
  99. mpu_config_enable:ok
  100.  
  101.  
  102. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  103.  
  104.  
  105. OPS=0x82
  106.  
  107.  
  108. wdt: reset registers!
  109.  
  110.  
  111. 1d 85 1e 60 e1 89 1c 86 0 d0 93 56 [0.279188 Inits done]
  112.  
  113.  
  114. secure task start!
  115.  
  116. high task start!
  117.  
  118. low task start!
  119.  
  120. ERROR: Error initializing runtime service opteed_fast
  121.  
  122.  
  123.  
  124.  
  125.  
  126. U-Boot 2015.01-gffa97ff (Jan 17 2019 - 19:40:34)
  127.  
  128.  
  129.  
  130. DRAM: 3 GiB
  131.  
  132. Relocation Offset is: b6eb4000
  133.  
  134. register usb cfg[0][1] = 00000000b7f5b1a8
  135.  
  136. [CANVAS]canvas init
  137.  
  138. boot_device_flag : 1
  139.  
  140. set wlan gpio pin 6.
  141.  
  142. set bluetooth gpio pin 17.
  143.  
  144. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  145.  
  146. init bus_cycle=6, bus_timing=7, system=5.0ns
  147.  
  148. reset failed
  149.  
  150. get_chip_type and ret:fffffffe
  151.  
  152. get_chip_type and ret:fffffffe
  153.  
  154. chip detect failed and ret:fffffffe
  155.  
  156. nandphy_init failed and ret=0xfffffff1
  157.  
  158. MMC: aml_priv->desc_buf = 0x00000000b3eb4790
  159.  
  160. aml_priv->desc_buf = 0x00000000b3eb6ab0
  161.  
  162. SDIO Port B: 0, SDIO Port C: 1
  163.  
  164. emmc/sd response timeout, cmd8, status=0x1ff2800
  165.  
  166. emmc/sd response timeout, cmd55, status=0x1ff2800
  167.  
  168. init_part() 293: PART_TYPE_AML
  169.  
  170. [mmc_init] mmc init success
  171.  
  172. dtb magic 5f4c4d41
  173.  
  174. Amlogic multi-dtb tool
  175.  
  176. Multi dtb detected
  177.  
  178. Multi dtb tool version: v2 .
  179.  
  180. Support 3 dtbs.
  181.  
  182. aml_dt soc: gxm platform: q201 variant: 3g
  183.  
  184. dtb 0 soc: gxm plat: q201 vari: 1g
  185.  
  186. dtb 1 soc: gxm plat: q201 vari: 2g
  187.  
  188. dtb 2 soc: gxm plat: q201 vari: 3g
  189.  
  190. Find match dtb: 2
  191.  
  192. start dts,buffer=00000000b3eb9300,dt_addr=00000000b3ed0300
  193.  
  194. Amlogic multi-dtb tool
  195.  
  196. Multi dtb detected
  197.  
  198. Multi dtb tool version: v2 .
  199.  
  200. Support 3 dtbs.
  201.  
  202. aml_dt soc: gxm platform: q201 variant: 3g
  203.  
  204. dtb 0 soc: gxm plat: q201 vari: 1g
  205.  
  206. dtb 1 soc: gxm plat: q201 vari: 2g
  207.  
  208. dtb 2 soc: gxm plat: q201 vari: 3g
  209.  
  210. Find match dtb: 2
  211.  
  212. parts: 10
  213.  
  214. 00: logo 0000000002000000 1
  215.  
  216. 01: recovery 0000000002000000 1
  217.  
  218. 02: rsv 0000000000800000 1
  219.  
  220. 03: tee 0000000000800000 1
  221.  
  222. 04: crypt 0000000002000000 1
  223.  
  224. 05: misc 0000000002000000 1
  225.  
  226. 06: boot 0000000002000000 1
  227.  
  228. 07: system 0000000080000000 1
  229.  
  230. 08: cache 0000000020000000 2
  231.  
  232. 09: data ffffffffffffffff 4
  233.  
  234. init_part() 293: PART_TYPE_AML
  235.  
  236. eMMC/TSD partition table have been checked OK!
  237.  
  238. check pattern success
  239.  
  240. mmc env offset: 0x27400000
  241.  
  242. In: serial
  243.  
  244. Out: serial
  245.  
  246. Err: serial
  247.  
  248. reboot_mode=charging
  249.  
  250. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  251.  
  252. _verify_dtb_checksum()-917: calc a5d227fd, store a5d227fd
  253.  
  254. _verify_dtb_checksum()-917: calc a5d227fd, store a5d227fd
  255.  
  256. dtb_read()-1039: total valid 2
  257.  
  258. dtb_read()-1106: do nothing
  259.  
  260. Amlogic multi-dtb tool
  261.  
  262. Multi dtb detected
  263.  
  264. Multi dtb tool version: v2 .
  265.  
  266. Support 3 dtbs.
  267.  
  268. aml_dt soc: gxm platform: q201 variant: 3g
  269.  
  270. dtb 0 soc: gxm plat: q201 vari: 1g
  271.  
  272. dtb 1 soc: gxm plat: q201 vari: 2g
  273.  
  274. dtb 2 soc: gxm plat: q201 vari: 3g
  275.  
  276. Find match dtb: 2
  277.  
  278. vpu: clk_level in dts: 7
  279.  
  280. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  281.  
  282. vpu: vpu_clk_gate_init_off
  283.  
  284. vpp: vpp_init
  285.  
  286. hpd_state=1
  287.  
  288. [1080p60hz] is invalid for cvbs.
  289.  
  290. set hdmitx VIC = 16
  291.  
  292. config HPLL = 2970000
  293.  
  294. HPLL: 0xc000027b
  295.  
  296. config HPLL done
  297.  
  298. j = 4 vid_clk_div = 1
  299.  
  300. hdmitx: set enc for VIC: 16
  301.  
  302. HDMITX-DWC addr=0x10004006 rd_data=0x40
  303.  
  304. Error: HDMITX-DWC exp_data=0xff mask=0x9f
  305.  
  306. rx version is 2.0 div=10
  307.  
  308. hdmtix: set audio
  309.  
  310. hdmitx phy setting done
  311.  
  312. saradc - saradc sub-system
  313.  
  314.  
  315.  
  316. Usage:
  317.  
  318. saradc saradc open <channel> - open a SARADC channel
  319.  
  320. saradc close - close the SARADC
  321.  
  322. saradc getval - get the value in current channel
  323.  
  324. saradc test - test the SARADC by channel-7
  325.  
  326. saradc get_in_range <min> <max> - return 0 if current value in the range of curr ent channel
  327.  
  328.  
  329.  
  330. SARADC closed.
  331.  
  332. vpp: vpp_pq_load pq val error !!!
  333.  
  334. Net: dwmac.c9410000amlkey_init() enter!
  335.  
  336. [EFUSE_MSG]keynum is 4
  337.  
  338. [BL31]: tee size: 0
  339.  
  340.  
  341.  
  342. Start read misc partition datas!
  343.  
  344. info->attemp_times = 0
  345.  
  346. info->active_slot = 0
  347.  
  348. info->slot_info[0].bootable = 1
  349.  
  350. info->slot_info[0].online = 1
  351.  
  352. info->slot_info[1].bootable = 0
  353.  
  354. info->slot_info[1].online = 0
  355.  
  356. info->attemp_times = 0
  357.  
  358. attemp_times = 0
  359.  
  360. active slot = 0
  361.  
  362. wipe_data=successful
  363.  
  364. wipe_cache=successful
  365.  
  366. upgrade_step=2
  367.  
  368. [OSD]load fb addr from dts
  369.  
  370. [OSD]fb_addr for logo: 0x7f851000
  371.  
  372. [OSD]load fb addr from dts
  373.  
  374. [OSD]fb_addr for logo: 0x7f851000
  375.  
  376. [CANVAS]addr=0x7f851000 width=5760, height=2160
  377.  
  378. amlkey_init() enter!
  379.  
  380. amlkey_init() 71: already init!
  381.  
  382. [EFUSE_MSG]keynum is 4
  383.  
  384. [BL31]: tee size: 0
  385.  
  386. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  387.  
  388. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  389.  
  390. gpio: pin GPIOAO_2 (gpio 102) value is 1
  391.  
  392. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  393.  
  394. card in
  395.  
  396. init_part() 278: PART_TYPE_DOS
  397.  
  398. [mmc_init] mmc init success
  399.  
  400. Device: SDIO Port B
  401.  
  402. Manufacturer ID: 1b
  403.  
  404. OEM: 534d
  405.  
  406. Name: 00000
  407.  
  408. Tran Speed: 50000000
  409.  
  410. Rd Block Len: 512
  411.  
  412. SD version 2.0
  413.  
  414. High Capacity: No
  415.  
  416. Capacity: 1.9 GiB
  417.  
  418. mmc clock: 40000000
  419.  
  420. Bus Width: 4-bit
  421.  
  422. reading kernel.img
  423.  
  424. 10260480 bytes read in 670 ms (14.6 MiB/s)
  425.  
  426. reading dtb.img
  427.  
  428. 44286 bytes read in 6 ms (7 MiB/s)
  429.  
  430. ee_gate_off ...
  431.  
  432. ## Booting Android Image at 0x01080000 ...
  433.  
  434. reloc_addr =b3f39550
  435.  
  436. copy done
  437.  
  438. load dtb from 0x1000000 ......
  439.  
  440. Amlogic multi-dtb tool
  441.  
  442. Single dtb detected
  443.  
  444. Uncompressing Kernel Image ... OK
  445.  
  446. kernel loaded at 0x01080000, end = 0x01baf550
  447.  
  448. Loading Ramdisk to b3a81000, end b3ea2600 ... OK
  449.  
  450. Loading Device Tree to 000000001fff2000, end 000000001ffffcfd ... OK
  451.  
  452. fdt_instaboot: no instaboot image
  453.  
  454.  
  455.  
  456. Starting kernel ...
  457.  
  458.  
  459.  
  460. uboot time: 2750006 us
  461.  
  462. [ 0.000000@0] Initializing cgroup subsys cpuset
  463.  
  464. [ 0.000000@0] Initializing cgroup subsys cpu
  465.  
  466. [ 0.000000@0] Initializing cgroup subsys cpuacct
  467.  
  468. [ 0.000000@0] Linux version 3.14.29 (adamg@zulu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro G CC 7.3-2018.05) ) #1 SMP Wed Feb 27 00:10:49 GMT 2019
  469.  
  470. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  471.  
  472. [ 0.000000@0] no prop version_code
  473.  
  474. [ 0.000000@0] bootconsole [earlycon0] enabled
  475.  
  476. [ 0.000000@0] fdt Reserved memory table:
  477.  
  478. [ 0.000000@0] linux,di: 0x00000000bd300000 - 0x00000000bf100 000 (30 MiB)
  479.  
  480. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x00000000bd 300000, size 30 MiB
  481.  
  482. [ 0.000000@0] linux,ion-dev: 0x00000000b9300000 - 0x00000000bd300 000 (64 MiB)
  483.  
  484. [ 0.000000@0] linux,vdin1_cma: 0x00000000b8000000 - 0x00000000b9000 000 (16 MiB)
  485.  
  486. [ 0.000000@0] cma: Reserved 16 MiB at b8000000, total cma pages:4096
  487.  
  488. [ 0.000000@0] linux,ppmgr: 0x00000000b9300000 - 0x00000000b9300 000 (0 MiB)
  489.  
  490. [ 0.000000@0] linux,codec_mm_cma: 0x00000000a7800000 - 0x00000000b3800 000 (192 MiB)
  491.  
  492. [ 0.000000@0] cma: Reserved 192 MiB at a7800000, total cma pages:53248
  493.  
  494. [ 0.000000@0] linux,picdec: 0x00000000b9300000 - 0x00000000b9300 000 (0 MiB)
  495.  
  496. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  497.  
  498. [ 0.000000@0] linux,codec_mm_reserved: 0x00000000b3f00000 - 0x00000000b8000 000 (65 MiB)
  499.  
  500. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  501.  
  502. [ 0.000000@0] cma: Reserved 8 MiB at a7000000, total cma pages:55296
  503.  
  504. [ 0.000000@0] psci: probing function IDs from device-tree
  505.  
  506. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0b9260000 s17536 r8192 d2 3424 u49152
  507.  
  508. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total p ages: 764504
  509.  
  510. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0, 115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ra moops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permiss ive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimo de=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 pq= androidboot.firstboot=0 jtag =apao androidboot.hardware=amlogic mac=26:6a:35:fa:7d:2b androidboot.mac=26:6a:3 5:fa:7d:2b androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_statu s=auto ssh
  511.  
  512. [ 0.000000@0] logo: osd1
  513.  
  514. [ 0.000000@0] logo: loaded
  515.  
  516. [ 0.000000@0] logo: 0x3d800000
  517.  
  518. [ 0.000000@0] logo: 1080p60hz
  519.  
  520. [ 0.000000@0] vout_serve: 1080p60hz
  521.  
  522. [ 0.000000@0] vout_serve: en: 1
  523.  
  524. [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
  525.  
  526. [ 0.000000@0] vout_serve: 1080p60hz
  527.  
  528. [ 0.000000@0] vout_serve: enable: 1
  529.  
  530. [ 0.000000@0] logo: get hdmimode: 1080p60hz
  531.  
  532. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  533.  
  534. [ 0.000000@0] tv_vout: cvbs performance line = 0
  535.  
  536. [ 0.000000@0] [amvecm] pq string error !!!
  537.  
  538. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  539.  
  540. [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 byt es)
  541.  
  542. [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes )
  543.  
  544. [ 0.000000@0] Memory: 2646120K/3125248K available (7077K kernel code, 805K rw data, 2648K rodata, 913K init, 2907K bss, 479128K reserved)
  545.  
  546. [ 0.000000@0] Virtual kernel memory layout:
  547.  
  548. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  549.  
  550. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff80441bd800 ( 65 MB)
  551.  
  552. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  553.  
  554. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0bf100000 ( 3057 MB)
  555.  
  556. [ 0.000000@0] .init : 0xffffffc001a01000 - 0xffffffc001ae5480 ( 914 kB)
  557.  
  558. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001a00774 ( 9730 kB)
  559.  
  560. [ 0.000000@0] .data : 0xffffffc001ae6000 - 0xffffffc001baf550 ( 806 kB)
  561.  
  562. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019fffff]
  563.  
  564. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
  565.  
  566. [ 0.000000@0] arch_multi_cluster:1
  567.  
  568. [ 0.000000@0] Hierarchical RCU implementation.
  569.  
  570. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  571.  
  572. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  573.  
  574. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  575.  
  576. [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 286 3311519744ns
  577.  
  578. [ 0.008247@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffff ff8000016994
  579.  
  580. [ 0.016805@0] Console: colour dummy device 80x25
  581.  
  582. [ 0.021087@0] console [tty0] enabled
  583.  
  584. [ 0.024672@0] bootconsole [earlycon0] disabled
  585.  
  586. domain-0 init dvfs: 4
  587.  
  588.  
  589. domain-1 init dvfs: 4
  590.  
  591.  
  592. [ 0.000000@0] Initializing cgroup subsys cpuset
  593.  
  594. [ 0.000000@0] Initializing cgroup subsys cpu
  595.  
  596. [ 0.000000@0] Initializing cgroup subsys cpuacct
  597.  
  598. [ 0.000000@0] Linux version 3.14.29 (adamg@zulu) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro G CC 7.3-2018.05) ) #1 SMP Wed Feb 27 00:10:49 GMT 2019
  599.  
  600. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  601.  
  602. [ 0.000000@0] no prop version_code
  603.  
  604. [ 0.000000@0] bootconsole [earlycon0] enabled
  605.  
  606. [ 0.000000@0] fdt Reserved memory table:
  607.  
  608. [ 0.000000@0] linux,di: 0x00000000bd300000 - 0x00000000bf100 000 (30 MiB)
  609.  
  610. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x00000000bd 300000, size 30 MiB
  611.  
  612. [ 0.000000@0] linux,ion-dev: 0x00000000b9300000 - 0x00000000bd300 000 (64 MiB)
  613.  
  614. [ 0.000000@0] linux,vdin1_cma: 0x00000000b8000000 - 0x00000000b9000 000 (16 MiB)
  615.  
  616. [ 0.000000@0] cma: Reserved 16 MiB at b8000000, total cma pages:4096
  617.  
  618. [ 0.000000@0] linux,ppmgr: 0x00000000b9300000 - 0x00000000b9300 000 (0 MiB)
  619.  
  620. [ 0.000000@0] linux,codec_mm_cma: 0x00000000a7800000 - 0x00000000b3800 000 (192 MiB)
  621.  
  622. [ 0.000000@0] cma: Reserved 192 MiB at a7800000, total cma pages:53248
  623.  
  624. [ 0.000000@0] linux,picdec: 0x00000000b9300000 - 0x00000000b9300 000 (0 MiB)
  625.  
  626. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  627.  
  628. [ 0.000000@0] linux,codec_mm_reserved: 0x00000000b3f00000 - 0x00000000b8000 000 (65 MiB)
  629.  
  630. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  631.  
  632. [ 0.000000@0] cma: Reserved 8 MiB at a7000000, total cma pages:55296
  633.  
  634. [ 0.000000@0] psci: probing function IDs from device-tree
  635.  
  636. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0b9260000 s17536 r8192 d2 3424 u49152
  637.  
  638. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total p ages: 764504
  639.  
  640. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0, 115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ra moops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permiss ive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimo de=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 pq= androidboot.firstboot=0 jtag =apao androidboot.hardware=amlogic mac=26:6a:35:fa:7d:2b androidboot.mac=26:6a:3 5:fa:7d:2b androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_statu s=auto ssh
  641.  
  642. [ 0.000000@0] logo: osd1
  643.  
  644. [ 0.000000@0] logo: loaded
  645.  
  646. [ 0.000000@0] logo: 0x3d800000
  647.  
  648. [ 0.000000@0] logo: 1080p60hz
  649.  
  650. [ 0.000000@0] vout_serve: 1080p60hz
  651.  
  652. [ 0.000000@0] vout_serve: en: 1
  653.  
  654. [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
  655.  
  656. [ 0.000000@0] vout_serve: 1080p60hz
  657.  
  658. [ 0.000000@0] vout_serve: enable: 1
  659.  
  660. [ 0.000000@0] logo: get hdmimode: 1080p60hz
  661.  
  662. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  663.  
  664. [ 0.000000@0] tv_vout: cvbs performance line = 0
  665.  
  666. [ 0.000000@0] [amvecm] pq string error !!!
  667.  
  668. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  669.  
  670. [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 byt es)
  671.  
  672. [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes )
  673.  
  674. [ 0.000000@0] Memory: 2646120K/3125248K available (7077K kernel code, 805K rw data, 2648K rodata, 913K init, 2907K bss, 479128K reserved)
  675.  
  676. [ 0.000000@0] Virtual kernel memory layout:
  677.  
  678. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  679.  
  680. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff80441bd800 ( 65 MB)
  681.  
  682. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  683.  
  684. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0bf100000 ( 3057 MB)
  685.  
  686. [ 0.000000@0] .init : 0xffffffc001a01000 - 0xffffffc001ae5480 ( 914 kB)
  687.  
  688. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001a00774 ( 9730 kB)
  689.  
  690. [ 0.000000@0] .data : 0xffffffc001ae6000 - 0xffffffc001baf550 ( 806 kB)
  691.  
  692. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019fffff]
  693.  
  694. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
  695.  
  696. [ 0.000000@0] arch_multi_cluster:1
  697.  
  698. [ 0.000000@0] Hierarchical RCU implementation.
  699.  
  700. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  701.  
  702. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  703.  
  704. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  705.  
  706. [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 286 3311519744ns
  707.  
  708. [ 0.008247@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffff ff8000016994
  709.  
  710. [ 0.016805@0] Console: colour dummy device 80x25
  711.  
  712. [ 0.021087@0] console [tty0] enabled
  713.  
  714. [ 0.024672@0] bootconsole [earlycon0] disabled
  715.  
  716. [ 0.032528@0] allocated 12582912 bytes of page_cgroup
  717.  
  718. [ 0.032543@0] please try 'cgroup_disable=memory' option if you don't want mem ory cgroups
  719.  
  720. [ 0.032570@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  721.  
  722. [ 0.032588@0] pid_max: default: 32768 minimum: 301
  723.  
  724. [ 0.032729@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  725.  
  726. [ 0.032746@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 byte s)
  727.  
  728. [ 0.038414@0] Initializing cgroup subsys memory
  729.  
  730. [ 0.038459@0] Initializing cgroup subsys devices
  731.  
  732. [ 0.038469@0] Initializing cgroup subsys freezer
  733.  
  734. [ 0.038479@0] Initializing cgroup subsys blkio
  735.  
  736. [ 0.038489@0] Initializing cgroup subsys net_prio
  737.  
  738. [ 0.038545@0] ftrace: allocating 23953 entries in 94 pages
  739.  
  740. [ 0.067886@0] /cpus/cpu@0: Missing clock-frequency property
  741.  
  742. [ 0.067912@0] /cpus/cpu@1: Missing clock-frequency property
  743.  
  744. [ 0.067923@0] /cpus/cpu@2: Missing clock-frequency property
  745.  
  746. [ 0.067935@0] /cpus/cpu@3: Missing clock-frequency property
  747.  
  748. [ 0.067946@0] /cpus/cpu@100: Missing clock-frequency property
  749.  
  750. [ 0.067958@0] /cpus/cpu@101: Missing clock-frequency property
  751.  
  752. [ 0.067971@0] /cpus/cpu@102: Missing clock-frequency property
  753.  
  754. [ 0.067986@0] /cpus/cpu@103: Missing clock-frequency property
  755.  
  756. [ 0.069583@0] Meson chip version = RevA (22:A - 82:0)
  757.  
  758. [ 0.070118@1] CPU1: Booted secondary processor
  759.  
  760. [ 0.070525@2] CPU2: Booted secondary processor
  761.  
  762. [ 0.070883@3] CPU3: Booted secondary processor
  763.  
  764. [ 0.071261@4] CPU4: Booted secondary processor
  765.  
  766. [ 0.071656@5] CPU5: Booted secondary processor
  767.  
  768. [ 0.072020@6] CPU6: Booted secondary processor
  769.  
  770. [ 0.072384@7] CPU7: Booted secondary processor
  771.  
  772. [ 0.072468@0] Brought up 8 CPUs
  773.  
  774. [ 0.072534@0] SMP: Total of 8 processors activated.
  775.  
  776. [ 0.073081@0] devtmpfs: initialized
  777.  
  778. [ 0.079777@2] sched: registering cpufreq notifiers for scale-invariant loads
  779.  
  780. [ 0.079824@2] instabooting: 0
  781.  
  782. [ 0.089401@0] cma: cma_init_reserved_areas, use_cma_first:1
  783.  
  784. [ 0.089498@0] pinctrl core: initialized pinctrl subsystem
  785.  
  786. [ 0.090131@2] regulator-dummy: no parameters
  787.  
  788. [ 0.090902@0] NET: Registered protocol family 16
  789.  
  790. [ 0.092313@2] ramoops: using module parameters
  791.  
  792. [ 0.092856@2] pstore: Registered ramoops as persistent store backend
  793.  
  794. [ 0.092877@2] ramoops: attached 0x100000@0x7300000, ecc: 0/0
  795.  
  796. [ 0.093721@0] aml_vdac_init: module init
  797.  
  798. [ 0.093872@3] register canvas platform driver
  799.  
  800. [ 0.093952@0] register rdma platform driver
  801.  
  802. [ 0.095175@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001af0000
  803.  
  804. [ 0.095590@0] DMA: preallocated 256 KiB pool for atomic allocations
  805.  
  806. [ 0.096737@0] software IO TLB [mem 0xa0c00000-0xa1000000] (4MB) mapped at [ff ffffc0a0c00000-ffffffc0a0ffffff]
  807.  
  808. [ 0.097176@2] aml_i2c version: 20140813
  809.  
  810. [ 0.097412@2] i2c-core: driver [pmu4] using legacy resume method
  811.  
  812. [ 0.097485@3] codec_mm:codec_mm_module_init
  813.  
  814. [ 0.097853@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  815.  
  816. [ 0.097867@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  817.  
  818. [ 0.097880@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  819.  
  820. [ 0.098093@0] clk_sys: register PLL sys_pll success done
  821.  
  822. [ 0.098112@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  823.  
  824. [ 0.098122@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  825.  
  826. [ 0.098132@0] gxl_clk: te: 2000000000Hz
  827.  
  828. [ 0.098150@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  829.  
  830. [ 0.098159@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  831.  
  832. [ 0.098169@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  833.  
  834. [ 0.098177@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  835.  
  836. [ 0.098186@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  837.  
  838. [ 0.098221@0] gxl_clk: clock initialization complete
  839.  
  840. [ 0.098417@0] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff80 0003e764
  841.  
  842. [ 0.100729@0] aml_iomap: amlogic iomap probe done
  843.  
  844. [ 0.101290@3] pinmux-gxl c1109880.pinmux: Init pinux probe!
  845.  
  846. [ 0.102466@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  847.  
  848. [ 0.102899@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type +0x0/0xc0)
  849.  
  850. [ 0.102933@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type +0x0/0xc0)
  851.  
  852. [ 0.103080@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type +0x0/0xc0)
  853.  
  854. [ 0.103104@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type +0x0/0xc0)
  855.  
  856. [ 0.105381@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
  857.  
  858. [ 0.105393@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
  859.  
  860. [ 0.105404@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
  861.  
  862. [ 0.105413@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
  863.  
  864. [ 0.105422@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
  865.  
  866. [ 0.105432@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
  867.  
  868. [ 0.105441@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000
  869.  
  870. [ 0.105452@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000
  871.  
  872. [ 0.107627@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
  873.  
  874. [ 0.107639@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
  875.  
  876. [ 0.107648@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
  877.  
  878. [ 0.107658@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
  879.  
  880. [ 0.107667@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
  881.  
  882. [ 0.107677@0] dvfs [scpi_dvfs_get_opps] - new count 5, max_freq 1000000000
  883.  
  884. [ 0.109608@3] codec_mm has 2 memory regions
  885.  
  886. [ 0.109667@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec _mm_cma ok
  887.  
  888. [ 0.109688@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec _mm_reserved ok
  889.  
  890. [ 0.109790@0] codec_mm has 2 memory regions
  891.  
  892. [ 0.109810@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec _mm_cma ok
  893.  
  894. [ 0.109827@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec _mm_reserved ok
  895.  
  896. [ 0.111741@2] vpu: driver version: v03
  897.  
  898. [ 0.111794@2] vpu: load vpu_clk: 666667000Hz(7)
  899.  
  900. [ 0.111881@2] vpu: vpu_probe OK
  901.  
  902. [ 0.113154@3] tv_vout: tvout_probe
  903.  
  904. [ 0.113180@3] tv_vout: chrdev devno 265289728 for disp
  905.  
  906. [ 0.113189@3] vout_notify: vout_register_server
  907.  
  908. [ 0.113197@3] tv_vout: register tv module server ok
  909.  
  910. [ 0.113442@2] tv_vout: create cdev tv
  911.  
  912. [ 0.113455@2] tv_vout: tvout_probe OK
  913.  
  914. [ 0.113949@2] canvas_probe reg=00000000c8838000,size=400
  915.  
  916. [ 0.113990@2] canvas maped reg_base =ffffff800009a000
  917.  
  918. [ 0.117817@0] rdma_probe
  919.  
  920. [ 0.324357@0] bio: create slab <bio-0> at 0
  921.  
  922. [ 0.325299@2] SCSI subsystem initialized
  923.  
  924. [ 0.325819@2] usbcore: registered new interface driver usbfs
  925.  
  926. [ 0.325918@3] usbcore: registered new interface driver hub
  927.  
  928. [ 0.326041@0] usbcore: registered new device driver usb
  929.  
  930. [ 0.326822@0] i2c-gpio i2c_gpio.40: using pins 172 (SDA) and 173 (SCL)
  931.  
  932. [ 0.327015@3] pps_core: LinuxPPS API ver. 1 registered
  933.  
  934. [ 0.327029@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Gio metti <[email protected]>
  935.  
  936. [ 0.327093@0] PTP clock support registered
  937.  
  938. [ 0.327585@0] hdmitx: system: amhdmitx_init
  939.  
  940. [ 0.327597@0] hdmitx: system: Ver: 2014May6
  941.  
  942. [ 0.327789@0] hdmitx: system: amhdmitx_probe
  943.  
  944. [ 0.328250@1] hdmitx: system: not find match init-data
  945.  
  946. [ 20: Mapped PHY: 0xc883c000
  947.  
  948. [ 0.328902@3] hdmitx20: Mapped PHY: 0xd0100000
  949.  
  950. [ 0.328912@3] hdmitx20: Mapped PHY: 0xda83a000
  951.  
  952. [ 0.328929@3] hdmitx: alread display in uboot 0x10
  953.  
  954. [ 0.328977@3] avmute set to 1
  955.  
  956. [ 0.329425@1] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  957.  
  958. [ 0.329445@1] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  959.  
  960. [ 0.329464@1] tv_vout: already display in uboot
  961.  
  962. [ 0.329472@1] vout_serve: vinfo mode is: 1080p60hz
  963.  
  964. [ 0.329480@1] vout_serve: init mode 1080p60hz
  965.  
  966. [ 0.329726@0] vout_serve: create_vout_fops OK
  967.  
  968. [ 0.329736@0] vout_serve: create vout attribute OK
  969.  
  970. [ 0.329744@0] vout_serve: meson_vout_probe OK
  971.  
  972. [ 0.329915@1] logo: logo_init
  973.  
  974. [ 0.330185@1] osd_rdma: osd_rdma_init: rdma_table p=0xa7041000,op=0xa7041000 , v=0xffffff800009e000
  975.  
  976. [ 0.330219@1] rdma_register, rdma_table_addr ffffff80000a9000 rdma_table_addr _phy a7042000 reg_buf ffffffc00029f000
  977.  
  978. [ 0.330233@1] rdma_register success, handle 1 table_size 4096
  979.  
  980. [ 0.330243@1] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  981.  
  982. [ 0.330267@1] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr _phy a7043000 reg_buf ffffffc0002d2000
  983.  
  984. [ 0.330280@1] rdma_register success, handle 2 table_size 4096
  985.  
  986. [ 0.330289@1] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  987.  
  988. [ 0.330733@0] Advanced Linux Sound Architecture Driver Initialized.
  989.  
  990. [ 0.332887@0] Switched to clocksource arch_sys_counter
  991.  
  992. [ 0.336034@0] hdmitx: system: irq 2
  993.  
  994. [ 0.343067@0] FS-Cache: Loaded
  995.  
  996. [ 0.351642@0] NET: Registered protocol family 2
  997.  
  998. [ 0.352122@0] TCP established hash table entries: 32768 (order: 6, 262144 byt es)
  999.  
  1000. [ 0.352352@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  1001.  
  1002. [ 0.352818@0] TCP: Hash tables configured (established 32768 bind 32768)
  1003.  
  1004. [ 0.352966@0] TCP: reno registered
  1005.  
  1006. [ 0.352999@0] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  1007.  
  1008. [ 0.353083@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  1009.  
  1010. [ 0.353407@0] NET: Registered protocol family 1
  1011.  
  1012. [ 0.353988@3] pwm: probe ok
  1013.  
  1014. [ 0.354261@3] wifi: power_on_pin_OD = 0;
  1015.  
  1016. [ 0.354278@3] aml_wifi wifi.35: [wifi_dev_probe] no power_on_pin2
  1017.  
  1018. [ 0.354318@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm phandle val= 32;pwm-channel1=4;pwm-channel2=12
  1019.  
  1020. [ 0.354333@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
  1021.  
  1022. [ 0.354346@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
  1023.  
  1024. [ 0.354358@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
  1025.  
  1026. [ 0.354371@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
  1027.  
  1028. [ 0.354383@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
  1029.  
  1030. [ 0.354395@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
  1031.  
  1032. [ 0.354408@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] wifi pwm dt ok
  1033.  
  1034. [ 0.354437@3] aml_wifi wifi.35: [pwm_double_channel_conf] wifi pwm conf ok
  1035.  
  1036. [ 0.354492@3] aml_wifi wifi.35: [wifi_dev_probe] dhd_static_buf setup
  1037.  
  1038. [ 0.354578@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allo cated
  1039.  
  1040. [ 0.354592@3] aml_wifi wifi.35: [wifi_dev_probe] interrupt_pin=241
  1041.  
  1042. [ 0.354603@3] aml_wifi wifi.35: [wifi_dev_probe] irq_num=100, irq_trigger_typ e=1
  1043.  
  1044. [ 0.354616@3] aml_wifi wifi.35: [wifi_dev_probe] power_on_pin=240
  1045.  
  1046. [ 0.354626@3] aml_wifi wifi.35: [wifi_dev_probe] clock_32k_pin=0
  1047.  
  1048. [ 0.354890@1] aml_wifi wifi.35: [wifi_setup_dt] wifi_setup_dt
  1049.  
  1050. [ 0.354931@1] aml_wifi wifi.35: [wifi_setup_dt] interrupt_pin(241)
  1051.  
  1052. [ 0.354951@1] aml_wifi wifi.35: [wifi_setup_dt] power_on_pin(240)
  1053.  
  1054. [ 0.355151@3] Unpacking initramfs...
  1055.  
  1056. [ 0.366960@3] Freeing initrd memory: 4228K (ffffffc0b3a81000 - ffffffc0b3ea20 00)
  1057.  
  1058. [ 0.369884@1] futex hash table entries: 2048 (order: 5, 131072 bytes)
  1059.  
  1060. [ 0.379391@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1061.  
  1062. [ 0.379894@3] msgmni has been set to 5608
  1063.  
  1064. [ 0.380993@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  1065.  
  1066. [ 0.381107@3] io scheduler noop registered (default)
  1067.  
  1068. [ 0.381117@3] io scheduler deadline registered
  1069.  
  1070. [ 0.381144@3] io scheduler cfq registered
  1071.  
  1072. [ 0.381996@0] meson-rng c8834000.rng: hwrng registered
  1073.  
  1074. [ 0.385816@3] loop: module loaded
  1075.  
  1076. [ 0.387647@0] tun: Universal TUN/TAP device driver, 1.6
  1077.  
  1078. [ 0.387671@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  1079.  
  1080. [ 0.512136@0] libphy: stmmac: probed
  1081.  
  1082. [ 0.512163@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  1083.  
  1084. [ 0.512174@0] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
  1085.  
  1086. [ 0.512604@3] PPP generic driver version 2.4.2
  1087.  
  1088. [ 0.512868@1] NET: Registered protocol family 24
  1089.  
  1090. [ 0.513040@3] usbcore: registered new interface driver smsc95xx
  1091.  
  1092. [ 0.513414@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  1093.  
  1094. [ 0.513547@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1095.  
  1096. [ 0.513576@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  1097.  
  1098. [ 0.513816@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1099.  
  1100. [ 0.514114@1] usbcore: registered new interface driver usb-storage
  1101.  
  1102. [ 0.514323@0] usbcore: registered new interface driver usbserial
  1103.  
  1104. [ 0.514409@1] usbcore: registered new interface driver usbserial_generic
  1105.  
  1106. [ 0.514492@3] usbserial: USB Serial support registered for generic
  1107.  
  1108. [ 0.514587@0] usbcore: registered new interface driver pl2303
  1109.  
  1110. [ 0.514668@3] usbserial: USB Serial support registered for pl2303
  1111.  
  1112. [ 0.515193@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd00 78000, iomap phy_base:0xffffff80000fa000
  1113.  
  1114. [ 0.515442@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  1115.  
  1116. [ 0.515511@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd00 78080, iomap phy_base:0xffffff80000fc080
  1117.  
  1118. [ 0.515851@0] mousedev: PS/2 mouse device common for all mice
  1119.  
  1120. [ 0.516141@0] i2c /dev entries driver
  1121.  
  1122. [ 0.517022@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  1123.  
  1124. [ 0.519275@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
  1125.  
  1126. [ 0.520536@0] arm_big_little: bL_cpufreq_register: Registered platform driver : scpi
  1127.  
  1128. [ 0.521219@3] ledtrig-cpu: registered to indicate activity on CPUs
  1129.  
  1130. [ 0.521378@0] hidraw: raw HID events driver (C) Jiri Kosina
  1131.  
  1132. [ 0.523922@1] usbcore: registered new interface driver usbhid
  1133.  
  1134. [ 0.523945@1] usbhid: USB HID core driver
  1135.  
  1136. [ 0.524138@3] ashmem: initialized
  1137.  
  1138. [ 0.524526@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fe4c0
  1139.  
  1140. [ 0.524561@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  1141.  
  1142. [ 0.524582@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  1143.  
  1144. [ 2.184518@1] console [ttyS0] enabled
  1145.  
  1146. [ 2.184588@0] hdmitx: plugin
  1147.  
  1148. [ 2.191410@3] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010a4c0
  1149.  
  1150. [ 2.198116@3] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  1151.  
  1152. [ 2.207913@3] meson-gpu-clkgen c883c000.gpu_clk: can't request region for res ource [mem 0xc883c000-0xc883cfff]
  1153.  
  1154. [ 2.217277@3] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error - 16
  1155.  
  1156. [ 2.224774@3] hdmitx: system: hdmitx_hdcp_init
  1157.  
  1158. [ 2.229579@3] aml_vrtc rtc.34: rtc core: registered aml_vrtc as rtc0
  1159.  
  1160. [ 2.235482@3] secmon has 1 memory regions
  1161.  
  1162. [ 2.239206@3] secmon: share in base: 0xffffff800011c000, share out base: 0xff ffff800011e000
  1163.  
  1164. [ 2.239651@0] EDID Parser:
  1165.  
  1166. [ 2.239855@0] hdmitx: get dtd0 vic: 95
  1167.  
  1168. [ 2.239858@0] hdmitx: get dtd1 vic: 16
  1169.  
  1170. [ 2.239881@0] hdmitx: edid: maybe invalid dv0 data
  1171.  
  1172. [ 2.239883@0] hdmitx: edid: find IEEEOUT
  1173.  
  1174. [ 2.239886@0] hdmitx: edid: check sum valid
  1175.  
  1176. [ 2.239887@0] hdmitx: edid: check sum valid
  1177.  
  1178. [ 2.239892@0] hdmitx: update rx hdr info 5 at edid parsing
  1179.  
  1180. [ 2.239895@0] hdmitx: edid: check sum valid
  1181.  
  1182. [ 2.239896@0] hdmitx: edid: check sum valid] hdmitx set channel status
  1183.  
  1184. [ 2.427832@3] secmon secmon.4: assigned reserved memory node linux,secmon ok
  1185.  
  1186. [ 2.434789@3] secmon: probe done
  1187.  
  1188. [ 2.438410@0] storage: storage in base: 0xffffff8001800000
  1189.  
  1190. [ 2.443423@0] storage: storage out base: 0xffffff8001880000
  1191.  
  1192. [ 2.448925@0] storage: storage block base: 0xffffff8001900000
  1193.  
  1194. [ 2.454664@0] storage: probe done!
  1195.  
  1196. [ 2.458537@3] aml_sd_emmc_probe: line 3594
  1197.  
  1198. [ 2.462038@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  1199.  
  1200. [ 2.471987@3] aml_sd_emmc_reg_init 1149
  1201.  
  1202. [ 2.475325@3] get property: ocr_avail, value:0x00200080
  1203.  
  1204. [ 2.481702@3] get property: f_min, value:300000
  1205.  
  1206. [ 2.487832@3] get property: f_max, value:100000000
  1207.  
  1208. [ 2.494213@3] get property: max_req_size, value:0x00020000
  1209.  
  1210. [ 2.500681@3] get property: pinname, str:emmc
  1211.  
  1212. [ 2.506462@3] get property: card_type, value:1
  1213.  
  1214. [ 2.512160@3] get property: gpio_dat3, str:
  1215.  
  1216. [ 2.517589@3] get property: hw_reset, str:
  1217.  
  1218. [ 2.523044@3] emmc:pdata->caps = c0000d47
  1219.  
  1220. [ 2.526985@3] emmc:pdata->caps2 = 18060
  1221.  
  1222. [ 2.530778@3] emmc:pdata->pm_caps = 0
  1223.  
  1224. [ 2.534417@3] storage 1, boot 1
  1225.  
  1226. [ 2.537505@3] get_storage_dev return 1
  1227.  
  1228. [ 2.572894@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1229.  
  1230. [ 2.573151@0] aml_sd_emmc_probe: line 3594
  1231.  
  1232. [ 2.577617@0] aml_sd_emmc_reg_init 1149
  1233.  
  1234. [ 2.581080@0] get property: ocr_avail, value:0x00200080
  1235.  
  1236. [ 2.587542@0] get prroperty: pinname, str:sd
  1237.  
  1238. [ 2.628820@0] get property: jtag_pin, str:
  1239.  
  1240. [ 2.634349@0] get property: card_type, value:5
  1241.  
  1242. [ 2.640017@0] get property: card_in_delay, value:400
  1243.  
  1244. [ 2.645890@0] get property: gpio_dat3, str:
  1245.  
  1246. [ 2.651341@0] sd:pdata->caps = 7
  1247.  
  1248. [ 2.654514@0] sd:pdata->caps2 = 0
  1249.  
  1250. [ 2.657712@0] sd:pdata->pm_caps = 0
  1251.  
  1252. [ 2.665566@2] emmc: BKOPS_EN bit is not set
  1253.  
  1254. [ 2.672921@2] emmc: trying cali 0-th time(s)
  1255.  
  1256. [ 2.684726@2] emmc: delay[0]= 200 padding= 4, bidx=0
  1257.  
  1258. [ 2.684749@2] emmc: delay[1]= 200 padding= 4, bidx=0
  1259.  
  1260. [ 2.689141@2] emmc: delay[2]= 200 padding= 4, bidx=0
  1261.  
  1262. [ 2.693043@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1263.  
  1264. [ 2.693094@3] aml_sd_emmc_probe: line 3594
  1265.  
  1266. [ 2.704012@2] emmc: delay[3]= 400 padding= 3, bidx=0
  1267.  
  1268. [ 2.704248@3] aml_sd_emmc_reg_init 1149
  1269.  
  1270. [ 2.704309@3] get property: ocr_avail, value:0x00200080
  1271.  
  1272. [ 2.704311@3] get property: f_min, value:400000
  1273.  
  1274. [ 2.704313@3] get property: f_max, value:200000000
  1275.  
  1276. [ 2.704315@3] get property: max_req_size, value:0x00020000
  1277.  
  1278. [ 2.704321@3] get property: pinname, str:sdio
  1279.  
  1280. [ 2.704325@3] get property: card_type, value:3
  1281.  
  1282. [ 2.704349@3] sdio:pdata->caps = 78107
  1283.  
  1284. [ 2.704352@3] sdio:pdata->caps2 = 0
  1285.  
  1286. [ 2.704354@3] sdio:pdata->pm_caps = 1
  1287.  
  1288. [ 2.742896@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  1289.  
  1290. [ 2.743233@0] ion_dev has 1 memory regions
  1291.  
  1292. [ 2.761506@1] fb: osd_init_module
  1293.  
  1294. [ 2.761651@1] fb: viu vsync irq: 35
  1295.  
  1296. [ 2.761658@1] fb: failed to init reserved memory
  1297.  
  1298. [ 2.761671@1] fb: osd_probe vinfo:ffffffc001b4ddc8
  1299.  
  1300. [ 2.761675@1] fb: init fbdev bpp is:32
  1301.  
  1302. [ 2.790070@2] emmc: delay[4]= 400 padding= 3, bidx=0
  1303.  
  1304. [ 2.795069@2] emmc: delay[5]= 400 padding= 3, bidx=0
  1305.  
  1306. [ 2.795135@1] fb: set osd0 reverse as NONE
  1307.  
  1308. [ 2.799996@0] fb: osd probe OK
  1309.  
  1310. [ 2.800241@3] ge2d: ge2d_init_module
  1311.  
  1312. [ 2.800251@3] ge2d: ge2d_dev major:242
  1313.  
  1314. [ 2.800657@3] ge2d: ge2d clock is 400 MHZ
  1315.  
  1316. [ 2.800661@3] ge2d: ge2d: pdev=ffffffc0002d5c00, irq=182, rstc=0xffffffc0a00d 3300, clk=ffffffc000328b00
  1317.  
  1318. [ 2.800716@3] ge2d: mapped phy: 0xd0160000
  1319.  
  1320. [ 2.800722@3] ge2d: ge2d start monitor
  1321.  
  1322. [ 2.800775@1] ge2d: ge2d workqueue monitor start
  1323.  
  1324. [ 2.801113@0] codec:Amlogic A/V streaming port init
  1325.  
  1326. [ 2.802637@3] codec:get gate demux control ok ffffffc0a00d3ac0
  1327.  
  1328. [ 2.802643@3] codec:get gate parser_top control ok ffffffc0a00d36c0
  1329.  
  1330. [ 2.802647@3] codec:get gate vpu_intr control ok ffffffc0a00d3400
  1331.  
  1332. [ 2.802654@3] codec:get gate vdec control ok ffffffc0a00d3040
  1333.  
  1334. [ 2.803517@3] codec:[tsync_pcr_init]init success.
  1335.  
  1336. [ 2.803667@3] codec:amvideocap_probe,amvideocap
  1337.  
  1338. [ 2.803670@3] codec:use cma buf.
  1339.  
  1340. [ 2.805838@3] codec:vdec_request_irq ffffffc001573838, vsync
  1341.  
  1342. [ 2.806057@0] codec:create_ge2d_work_queue video task ok
  1343.  
  1344. [ 2.806633@3] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr _phy a7050000 reg_buf ffffffc0a0128000
  1345.  
  1346. [ 2.806637@3] rdma_register success, handle 3 table_size 32768
  1347.  
  1348. [ 2.806639@3] video_rdma:rdma_init video rdma handle = 3.
  1349.  
  1350. [ 2.806644@3] codec:used fix clk for vdec clk source!
  1351.  
  1352. [ 2.806650@3] codec:register clk_set_setting cpu[34]
  1353.  
  1354. [ 2.807425@3] DI: di_module_init ok.
  1355.  
  1356. [ 2.807430@3] DI: di_module_init: major 238
  1357.  
  1358. [ 2.807645@0] DI: di_probe
  1359.  
  1360. [ 2.807832@3] deinterlace has 1 memory regions
  1361.  
  1362. [ 2.807884@3] deinterlace deinterlace.26: assigned reserved memory node linux ,di ok
  1363.  
  1364. [ 2.807888@3] DI-di_probe: get flag_cma error.
  1365.  
  1366. [ 2.807911@3] di_irq:78,timerc_irq:38
  1367.  
  1368. [ 2.808078@3] rdma_register, rdma_table_addr ffffff8000179000 rdma_table_addr _phy a704a000 reg_buf ffffffc0a0104000
  1369.  
  1370. [ 2.808081@3] rdma_register success, handle 4 table_size 8192
  1371.  
  1372. [ 2.808083@3] DI: di_probe allocate rdma channel 4.
  1373.  
  1374. [ 2.808087@3] DI: DI hw verit
  1375.  
  1376. [ 2.810530@0] enter bt_probe of_node
  1377.  
  1378. [ 2.810548@0] not get gpio_en
  1379.  
  1380. [ 2.810553@0] power on valid level is high
  1381.  
  1382. [ 2.810553@0] bt: power_on_pin_OD = 0;
  1383.  
  1384. [ 3.093174@4] [aml_is_card_insert] card IN
  1385.  
  1386. [ 3.159497@2] emmc: delay[6]= 400 padding= 3, bidx=0
  1387.  
  1388. [ 3.164471@2] emmc: delay[7]= 400 padding= 3, bidx=0
  1389.  
  1390. [ 3.169467@2] emmc: calibration result @ 0: max(400), min(200)
  1391.  
  1392. [ 3.175252@2] emmc: line_delay =0x111, max_cal_result =400
  1393.  
  1394. [ 3.180680@2] emmc: base_index_max 0, base_index_min 0
  1395.  
  1396. [ 3.185798@4] emmc: clk 100000000 SDR0mode tuning start
  1397.  
  1398. [ 3.194840@6] normal card in
  1399.  
  1400. [ 3.202777@2] emmc: rx_tuning_result[0] = 10
  1401.  
  1402. [ 3.203187@2] emmc: rx_tuning_result[1] = 10
  1403.  
  1404. [ 3.205997@2] emmc: rx_tuning_result[2] = 10
  1405.  
  1406. [ 3.210227@2] emmc: rx_tuning_result[3] = 10
  1407.  
  1408. [ 3.214501@2] emmc: rx_tuning_result[4] = 10
  1409.  
  1410. [ 3.218718@2] emmc: rx_tuning_result[5] = 10
  1411.  
  1412. [ 3.222948@2] emmc: rx_tuning_result[6] = 10
  1413.  
  1414. [ 3.223119@0] audio_dsp: [dsp]register dsp to char divece(257)
  1415.  
  1416. [ 3.223826@1] amaudio: amaudio: driver amaudio succuess!
  1417.  
  1418. [ 3.224417@1] [RX]-hdmirx: hdmirx_init.
  1419.  
  1420. [ 3.224419@1] ESM HLD: Initializing...
  1421.  
  1422. [ 3.224421@1] ESM HLD: Registering device range 'esm_rx'...
  1423.  
  1424. [ 3.224427@1] ESM HLD: Device range 'esm_rx' has been registered.
  1425.  
  1426. [ 3.224429@1] ESM HLD: Creating class /sys/class/elliptic_rx...
  1427.  
  1428. [ 3.224482@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
  1429.  
  1430. [ 3.224484@0] ESM HLD: Creating device 'esm_rx'...
  1431.  
  1432. [ 3.224622@1] ESM HLD: Device 'esm_rx' has been created.
  1433.  
  1434. [ 3.224623@1] ESM HLD: Done initializing the HLD driver.
  1435.  
  1436. [ 3.224624@1] module init
  1437.  
  1438. [ 3.224739@1]
  1439.  
  1440. [ 3.224739@1] VECM probe start
  1441.  
  1442. [ 3.224984@1] dolby_vision_init_receiver(dvel)
  1443.  
  1444. [ 3.224988@1] dolby_vision_init_receiver: dvel
  1445.  
  1446. [ 3.224989@1] aml_vecm_probe: ok
  1447.  
  1448. [ 3.225650@1] saradc c1108680.saradc: initialized by BL30
  1449.  
  1450. [ 3.225660@1] saradc c1108680.saradc: calibration start:
  1451.  
  1452. [ 3.225707@1] saradc c1108680.saradc: nominal=0, value=5
  1453.  
  1454. [ 3.225754@1] saradc c1108680.saradc: nominal=256, value=265
  1455.  
  1456. [ 3.225800@1] saradc c1108680.saradc: nominal=512, value=527
  1457.  
  1458. [ 3.225847@1] saradc c1108680.saradc: nominal=768, value=788
  1459.  
  1460. [ 3.225893@1] saradc c1108680.saradc: nominal=1023, value=1023
  1461.  
  1462. [ 3.225895@1] saradc c1108680.saradc: calibration end: coef=4009
  1463.  
  1464. [ 3.226026@0] remote: Driver init
  1465.  
  1466. [ 3.226259@1] gpio-key gpio_keypad.50: gpio_key: 0 name(power) pin()
  1467.  
  1468. [ 3.226263@1] gpio-key gpio_keypad.50: amlogic_gpio_name_map_num pin 0!::
  1469.  
  1470. [ 3.226276@1] gpio-key gpio_keypad.50: gpio_key: 0 power(147)
  1471.  
  1472. [ 3.226302@1] gpio-key gpio_keypad.50: start setup_timer
  1473.  
  1474. [ 3.226307@1] gpio-key gpio_keypad.50: power key(116) registed.
  1475.  
  1476. [ 3.226487@0] input: gpio_keypad as /devices/gpio_keypad.50/input/input0
  1477.  
  1478. [ 3.226654@1] gpio-key gpio_keypad.50: gpio keypad register input device comp leted.
  1479.  
  1480. [ 3.226662@1] input input0: gpio keypad major:232
  1481.  
  1482. [ 3.226973@0] cpuinfo: probe done
  1483.  
  1484. [ 3.227721@0] input: cec_input as /devices/virtual/input/input1
  1485.  
  1486. [ 3.227989@1] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  1487.  
  1488. [ 3.227991@1] cectx aocec: aml_cec_probe(): no hhi reg resource
  1489.  
  1490. [ 3.228091@1] cectx aocec: aml_cec_probe(): can't find hdmirx
  1491.  
  1492. [ 3.229218@1] cec: wake up flag:0
  1493.  
  1494. [ 3.230628@1] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  1495.  
  1496. [ 3.232155@0] aml-i2s-dai I2S.42: I2S Mic is in platform!
  1497.  
  1498. [ 3.232397@1] aml_pcm_dai: pcm mode detection =1
  1499.  
  1500. [ 3.322895@1] input input0: key 116 up
  1501.  
  1502. [ 3.443058@3] aml_snd_card: headphone detection disable=1
  1503.  
  1504. [ 3.443062@3] aml_snd_card: no spk event delay time set
  1505.  
  1506. [ 3.443743@3] aml_snd_m8_card aml_m8_snd.49: T9015-audio-hifi <-> I2S.42 mapp ing ok
  1507.  
  1508. [ 3.444180@3] aml_snd_m8_card aml_m8_snd.49: dit-hifi <-> SPDIF.43 mapping ok
  1509.  
  1510. [ 3.444211@3] aml_pcm: enter aml_pcm_new dai->name: PCM.44 dai->id: 0
  1511.  
  1512. [ 3.444318@3] aml_snd_m8_card aml_m8_snd.49: pcm2bt-pcm <-> PCM.44 mapping ok
  1513.  
  1514. [ 3.444337@3] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTL
  1515.  
  1516. [ 3.444342@3] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  1517.  
  1518. [ 3.444346@3] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTR
  1519.  
  1520. [ 3.444349@3] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  1521.  
  1522. [ 3.445745@1] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  1523.  
  1524. [ 3.446237@3] TCP: cubic registered
  1525.  
  1526. [ 3.446910@0] NET: Registered protocol family 10
  1527.  
  1528. [ 3.447535@0] NET: Registered protocol family 17
  1529.  
  1530. [ 3.447562@0] Key type dns_resolver registered
  1531.  
  1532. [ 3.448628@0] Registering SWP/SWPB emulation handler
  1533.  
  1534. [ 3.449267@3] regulator-dummy: disabling
  1535.  
  1536. [ 3.566926@2] emmc: rx_tuning_result[7] = 10
  1537.  
  1538. [ 3.567306@2] emmc: rx_tuning_result[8] = 10
  1539.  
  1540. [ 3.570145@2] emmc: rx_tuning_result[9] = 10
  1541.  
  1542. [ 3.574024@2] emmc: best_win_start =0, best_win_size =10
  1543.  
  1544. [ 3.579276@2] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x20 00
  1545.  
  1546. [ 3.586528@2] emmc: gclock =0x100024a, gdelay=0x111, gadjust=0x2000
  1547.  
  1548. [ 3.593636@2] emmc: support driver strength type 1
  1549.  
  1550. [ 3.594972@5] [aml_is_card_insert] card IN
  1551.  
  1552. [ 3.601904@2] emmc: try set sd/emmc to DDR mode
  1553.  
  1554. [ 3.606025@2] emmc: try set sd/emmc to DDR mode
  1555.  
  1556. [ 3.610965@2] emmc: new HS400 MMC card at address 0001
  1557.  
  1558. [ 3.615593@2] emmc: clock 100000000, 8-bit-bus-width
  1559.  
  1560.  
  1561.  
  1562. [ 3.621173@2] mmcblk0: emmc:0001 BS032G 28.8 GiB
  1563.  
  1564. [ 3.625576@2] mmcblk0boot0: emmc:0001 BS032G partition 1 4.00 MiB
  1565.  
  1566. [ 3.631591@2] mmcblk0boot1: emmc:0001 BS032G partition 2 4.00 MiB
  1567.  
  1568. [ 3.637644@2] mmcblk0rpmb: emmc:0001 BS032G partition 3 4.00 MiB
  1569.  
  1570. [ 3.644461@2] mmcblk0: unknown partition table
  1571.  
  1572. [ 3.648682@2] [mmc_read_partition_tbl] mmc read partition OK!
  1573.  
  1574. [ 3.653633@2] add_emmc_partition
  1575.  
  1576. [ 3.657126@2] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  1577.  
  1578. [ 3.665439@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  1579.  
  1580. [ 3.673767@2] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  1581.  
  1582. [ 3.682109@2] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  1583.  
  1584. [ 3.690487@2] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  1585.  
  1586. [ 3.698859@2] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  1587.  
  1588. [ 3.707227@2] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  1589.  
  1590. [ 3.715595@2] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  1591.  
  1592. [ 3.723975@2] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  1593.  
  1594. [ 3.732301@2] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  1595.  
  1596. [ 3.740696@2] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  1597.  
  1598. [ 3.749051@2] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  1599.  
  1600. [ 3.757420@2] [mmcblk0p13] data offset 0x0000b7400000, size 0x00067cc00000
  1601.  
  1602. [ 3.765629@2] card key: card_blk_probe.
  1603.  
  1604. [ 3.769374@2] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  1605.  
  1606. [ 3.776194@2] emmc key: emmc_key_init:552 ok.
  1607.  
  1608. [ 3.780498@2] amlmmc_dtb_init: register dtb chardev
  1609.  
  1610. [ 3.789593@2] calc a5d227fd, store a5d227fd
  1611.  
  1612. [ 3.793831@2] calc a5d227fd, store a5d227fd
  1613.  
  1614. [ 3.793854@2] total valid 2
  1615.  
  1616. [ 3.797955@2] amlmmc_dtb_init: register dtb chardev OK
  1617.  
  1618. [ 3.801738@2] Exit aml_emmc_partition_ops OK.
  1619.  
  1620. [ 3.811552@2] mmcblk0boot1: unknown partition table
  1621.  
  1622. [ 3.815575@2] mmcblk0boot0: unknown partktion table
  1623.  
  1624. [ 3.816440@2] glear_emmc_wait_flag
  1625.  
  1626. [ 3.855415@2] sd: new high speed SD card at address 0001
  1627.  
  1628. [ 3.855446@2] sd: clock 50000000, 4-bit-bus-width
  1629.  
  1630.  
  1631.  
  1632. [ 3.861136@2] mmcblk1: sd:0001 00000 1.89 GiB
  1633.  
  1634. [ 3.865958@2]
  1635. [ 4.152125@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1636.  
  1637. [ 4.152195@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1638.  
  1639. [ 4.161419@1] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  1640.  
  1641. [ 4.166190@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1642.  
  1643. [ 4.172867@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
  1644.  
  1645. [ 4.180392@1] usb usb1: Product: xHCI Host Controller
  1646.  
  1647. [ 4.185227@1] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  1648.  
  1649. [ 4.190806@1] usb usb1: SerialNumber: xhci-hcd.0.auto
  1650.  
  1651. [ 4.197965@2] hub 1-0:1.0: USB hub found
  1652.  
  1653. [ 4.199736@3] hub 1-0:1.0: 3 ports detected
  1654.  
  1655. [ 4.204236@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1656.  
  1657. [ 4.209447@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  1658.  
  1659. [ 4.217338@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  1660.  
  1661. [ 4.224115@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
  1662.  
  1663. [ 4.231430@3] usb usb2: Product: xHCI Host Controller
  1664.  
  1665. [ 4.236453@3] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  1666.  
  1667. [ 4.242038@3] usb usb2: SerialNumber: xhci-hcd.0.auto
  1668.  
  1669. [ 4.248734@2] hub 2-0:1.0: USB hub found
  1670.  
  1671. [ 4.250960@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -1 9)
  1672.  
  1673. [ 4.260952@5] console [netcon0] enabled
  1674.  
  1675. [ 4.261976@5] netconsole: network logging started
  1676.  
  1677. [ 4.267001@5] aml_vrtc rtc.34: setting system clock to 2019-03-15 20:25:05 UT C (1552681505)
  1678.  
  1679. [ 4.284962@5] gxbb_pm: enter meson_pm_probe!
  1680.  
  1681. [ 4.285348@5] gxbb_pm: meson_pm_probe done
  1682.  
  1683. [ 4.292389@5] cpucore_cooling_register, max_cpu_core_num:4
  1684.  
  1685. [ 4.294189@5] cpucore_cooling_register, max_cpu_core_num:4
  1686.  
  1687. [ 4.316469@5] aml_istbt_dev_ready NULL
  1688.  
  1689. [ 4.316772@5] ALSA device list:
  1690.  
  1691. [ 4.317802@5] #0: AML-M8AUDIO
  1692.  
  1693. [ 4.324721@5] Freeing unused kernel memory: 912K (ffffffc001a01000 - ffffffc0 01ae5000)
  1694.  
  1695. CoreELEC:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!