vestibule d1

binary_sensor:
  - platform: gpio
    pin:
      number: D2
#      mode: INPUT_PULLUP
      mode: INPUT
      inverted: true
    name: "Street door"
    device_class: door
  - platform: gpio
    pin:
      number: D7
#      mode: INPUT_PULLDOWN
    name: "Motion sensor vestibule"
    device_class: motion
    filters:
      - delayed_on: 100ms
      - delayed_off: 60000ms
  - platform: gpio
    pin:
      number: RX
      mode: INPUT_PULLUP
#      mode: INPUT
      inverted: true
    name: "Street call"
    device_class: plug

switch:
  - platform: gpio
    pin: D8
    id: relay1
    name: "Street door remote"
    icon: "mdi:gate"
    on_turn_on:
    - delay: 500ms
    - switch.turn_off: relay1
    restore_mode:
      ALWAYS_OFF


  - platform: gpio
    pin: D1
    id: relay2
    name: "Relay"

  - platform: uart
    name: Pzem_Energy_Reset_UART
    data: [0x01, 0x42, 0x80, 0x11]
    uart_id: pzem_uart

uart:
  rx_pin: D5
  tx_pin: D6
  baud_rate: 9600
  stop_bits: 1
  id: pzem_uart

sensor:
  - platform: wifi_signal
    name: "Street door WiFi Signal"
  - platform: pzemac
    current:
      name: "PZEM-004T V3 Current"
    voltage:
      name: "PZEM-004T V3 Voltage"
    energy:
      name: "PZEM-004T V3 Energy"
    power:
      name: "PZEM-004T V3 Power"
    frequency:
      name: "PZEM-004T V3 Frequency"
    power_factor:
      name: "PZEM-004T V3 Power Factor"
    update_interval: 30s
  - platform: uptime
    name: Uptime Sensor