ENDSL-A2+WIGX2 Features
 General
 Availability:	currently available
 Street price:	$49
 LAN / WAN Connectivity
 WAN throughput:	24 Mbps
 WAN throughput upstream:	1 Mbps
 WAN ports:	1
 WAN port(s) type:	DSL/ISDN/POTS connector (RJ-11)
 LAN ports:	4
 LAN ports type:	10/100 Base-TX (RJ-45)
 LAN ports auto cross-over:
 Router
 NAT routing:
 Multihomed:
 DMZ:
 Port forwarding:
 DHCP server:
 DHCP client:
 DHCP relay:
 DNS proxy:
 Dynamic DNS client:
 QoS:
 UPnP:
 Transparent Bridging (IEEE 802.1d):
 Routing Protocols:	RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance:	ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client:
 PPPoA client:
 Wireless
 Maximum Wireless Speed:	54 Mbps
 WiFi standards supported:	802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication:	WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes:	Access point
 external antenna(s):	1
 ext antenna(s) removable ?:
 Antenna connector:	RP-SMA (Reverse SMA)
 Transmit Power:	+15 dBm
 Receiver Sensitivity:	-60 dBm
 Multiple SSID:
 WMM (QoS):
 VPN
 	IPSec
 IPSec passthrough:
 	L2TP
 L2TP passthrough:
 	PPTP
 PPTP passthrough:
 Firewall
 SPI firewall:
 DoS / DDoS protection:
 Filtering:	IP Address filtering
 Device Management
 Default IP address:	192.168.1.1

 Default admin username:	admin
 Default admin password:	trendchip
 Administration:	Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
TFTP (RFC 1350)
 Firmware upgradeable:
 Event log:
 Usage Statistics:
 Diagnostic functions:
 Misc hardware info
 SNMP support:	SNMP v.1, SNMP v.2
 NTP client: