bobstro

Prusa Filament Profiles

Dec 6th, 2020 (edited)
517
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # Prusa filament profiles
  2. # Extracted from PrusaSlicer 20201201
  3. # XXXXXXxxXXXXXXXXXXXXXX
  4. # XXX--- filament ---XXX
  5. # XXXXXXXXxxXXXXXXXXXXXX
  6.  
  7. [filament:*common*]
  8. cooling = 1
  9. compatible_printers =
  10. # For now, all but selected filaments are disabled for the MMU 2.0
  11. compatible_printers_condition =
  12. end_filament_gcode = "; Filament-specific end gcode"
  13. extrusion_multiplier = 1
  14. filament_loading_speed = 28
  15. filament_loading_speed_start = 3
  16. filament_unloading_speed = 90
  17. filament_unloading_speed_start = 100
  18. filament_toolchange_delay = 0
  19. filament_cooling_moves = 4
  20. filament_cooling_initial_speed = 2.2
  21. filament_cooling_final_speed = 3.4
  22. filament_load_time = 0
  23. filament_unload_time = 0
  24. filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  25. filament_minimal_purge_on_wipe_tower = 15
  26. filament_cost = 0
  27. filament_density = 0
  28. filament_diameter = 1.75
  29. filament_notes = ""
  30. filament_settings_id = ""
  31. filament_soluble = 0
  32. min_print_speed = 15
  33. slowdown_below_layer_time = 20
  34. start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"
  35.  
  36. [filament:*PLA*]
  37. inherits = *common*
  38. bed_temperature = 65
  39. bridge_fan_speed = 100
  40. disable_fan_first_layers = 1
  41. fan_always_on = 1
  42. fan_below_layer_time = 100
  43. filament_colour = #FF8000
  44. filament_max_volumetric_speed = 15
  45. filament_type = PLA
  46. first_layer_bed_temperature = 60
  47. first_layer_temperature = 215
  48. max_fan_speed = 100
  49. min_fan_speed = 100
  50. temperature = 200
  51. start_filament_gcode = "M900 K0.05; Filament gcode LA 1.5\n"
  52.  
  53. [filament:*PET*]
  54. inherits = *common*
  55. bed_temperature = 80
  56. bridge_fan_speed = 50
  57. disable_fan_first_layers = 3
  58. fan_always_on = 1
  59. fan_below_layer_time = 20
  60. filament_colour = #FF8000
  61. filament_max_volumetric_speed = 8
  62. filament_type = PETG
  63. first_layer_bed_temperature = 85
  64. first_layer_temperature = 230
  65. max_fan_speed = 50
  66. min_fan_speed = 30
  67. start_filament_gcode = "M900 K0.08; Filament gcode LA 1.5\n"
  68. temperature = 240
  69. filament_retract_length = 1.4
  70. filament_retract_lift = 0.2
  71. compatible_printers_condition =
  72.  
  73. [filament:*ABS*]
  74. inherits = *common*
  75. bed_temperature = 110
  76. bridge_fan_speed = 25
  77. cooling = 0
  78. disable_fan_first_layers = 3
  79. fan_always_on = 0
  80. fan_below_layer_time = 20
  81. filament_colour = #FFF2EC
  82. filament_max_volumetric_speed = 11
  83. filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  84. filament_type = ABS
  85. first_layer_bed_temperature = 100
  86. first_layer_temperature = 255
  87. max_fan_speed = 30
  88. min_fan_speed = 20
  89. temperature = 255
  90. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  91. compatible_printers_condition =
  92.  
  93. [filament:*ABSC*]
  94. inherits = *common*
  95. bed_temperature = 110
  96. bridge_fan_speed = 25
  97. cooling = 1
  98. disable_fan_first_layers = 4
  99. fan_always_on = 0
  100. fan_below_layer_time = 30
  101. slowdown_below_layer_time = 20
  102. filament_colour = #FFF2EC
  103. filament_max_volumetric_speed = 11
  104. filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  105. filament_type = ABS
  106. first_layer_bed_temperature = 100
  107. first_layer_temperature = 255
  108. max_fan_speed = 15
  109. min_fan_speed = 15
  110. min_print_speed = 15
  111. temperature = 255
  112. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  113. compatible_printers_condition =
  114.  
  115. [filament:*FLEX*]
  116. inherits = *common*
  117. bed_temperature = 50
  118. bridge_fan_speed = 80
  119. # For now, all but selected filaments are disabled for the MMU 2.0
  120. compatible_printers_condition =
  121. cooling = 0
  122. disable_fan_first_layers = 3
  123. extrusion_multiplier = 1.15
  124. fan_always_on = 0
  125. fan_below_layer_time = 100
  126. filament_colour = #008000
  127. filament_max_volumetric_speed = 1.5
  128. filament_type = FLEX
  129. first_layer_bed_temperature = 50
  130. first_layer_temperature = 240
  131. max_fan_speed = 90
  132. min_fan_speed = 70
  133. start_filament_gcode = "M900 K0"; Filament gcode"
  134. temperature = 240
  135. filament_retract_length = 0.8
  136. filament_deretract_speed = 25
  137. filament_retract_lift = 0
  138. filament_wipe = 0
  139.  
  140. [filament:ColorFabb bronzeFill (Prusa)]
  141. inherits = *PLA*
  142. filament_vendor = ColorFabb
  143. compatible_printers_condition =
  144. extrusion_multiplier = 1.2
  145. filament_cost = 49.99
  146. filament_density = 3.9
  147. filament_colour = #804040
  148. filament_max_volumetric_speed = 9
  149.  
  150. [filament:ColorFabb steelFill (Prusa)]
  151. inherits = *PLA*
  152. filament_vendor = ColorFabb
  153. compatible_printers_condition =
  154. extrusion_multiplier = 1.2
  155. filament_cost = 49.99
  156. filament_density = 3.13
  157. filament_colour = #808080
  158. filament_max_volumetric_speed = 8
  159.  
  160. [filament:ColorFabb copperFill (Prusa)]
  161. inherits = *PLA*
  162. filament_vendor = ColorFabb
  163. compatible_printers_condition =
  164. extrusion_multiplier = 1.2
  165. filament_cost = 72.89
  166. filament_density = 3.9
  167. filament_colour = #82603E
  168. filament_max_volumetric_speed = 9
  169.  
  170. [filament:ColorFabb HT (Prusa)]
  171. inherits = *PET*
  172. filament_vendor = ColorFabb
  173. bed_temperature = 110
  174. bridge_fan_speed = 30
  175. cooling = 1
  176. disable_fan_first_layers = 3
  177. fan_always_on = 0
  178. fan_below_layer_time = 10
  179. filament_cost = 65.66
  180. filament_density = 1.18
  181. first_layer_bed_temperature = 105
  182. first_layer_temperature = 270
  183. max_fan_speed = 20
  184. min_fan_speed = 10
  185. start_filament_gcode = "M900 K0.08; Filament gcode LA 1.5\n"
  186. temperature = 270
  187.  
  188. [filament:ColorFabb PLA-PHA (Prusa)]
  189. inherits = *PLA*
  190. filament_vendor = ColorFabb
  191. filament_cost = 52.46
  192. filament_density = 1.24
  193.  
  194. [filament:ColorFabb woodFill (Prusa)]
  195. inherits = *PLA*
  196. filament_vendor = ColorFabb
  197. compatible_printers_condition =
  198. extrusion_multiplier = 1.1
  199. filament_cost = 38.99
  200. filament_density = 1.15
  201. filament_colour = #dfc287
  202. filament_max_volumetric_speed = 9
  203. first_layer_temperature = 200
  204. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  205. temperature = 200
  206. filament_retract_lift = 0.2
  207.  
  208. [filament:ColorFabb corkFill (Prusa)]
  209. inherits = *PLA*
  210. filament_vendor = ColorFabb
  211. compatible_printers_condition =
  212. extrusion_multiplier = 1.1
  213. filament_cost = 38.99
  214. filament_density = 1.18
  215. filament_colour = #634d33
  216. filament_max_volumetric_speed = 6
  217. first_layer_temperature = 220
  218. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  219. temperature = 220
  220. filament_retract_lift = 0.2
  221.  
  222. [filament:ColorFabb XT (Prusa)]
  223. inherits = *PET*
  224. filament_vendor = ColorFabb
  225. filament_cost = 38.99
  226. filament_density = 1.27
  227. first_layer_bed_temperature = 90
  228. first_layer_temperature = 260
  229. temperature = 270
  230.  
  231. [filament:ColorFabb XT-CF20 (Prusa)]
  232. inherits = *PET*
  233. filament_vendor = ColorFabb
  234. extrusion_multiplier = 1.05
  235. filament_cost = 49.99
  236. filament_density = 1.35
  237. filament_colour = #804040
  238. filament_max_volumetric_speed = 2
  239. first_layer_bed_temperature = 90
  240. first_layer_temperature = 260
  241. start_filament_gcode = "M900 K0.06; Filament gcode LA 1.5\n"
  242. temperature = 260
  243. filament_retract_length = nil
  244. filament_retract_lift = 0.4
  245.  
  246. [filament:ColorFabb nGen (Prusa)]
  247. inherits = *PET*
  248. filament_vendor = ColorFabb
  249. filament_cost = 52.46
  250. filament_density = 1.2
  251. bridge_fan_speed = 40
  252. fan_always_on = 0
  253. fan_below_layer_time = 10
  254. filament_type = NGEN
  255. first_layer_temperature = 240
  256. max_fan_speed = 35
  257. min_fan_speed = 20
  258.  
  259. [filament:ColorFabb nGen flex (Prusa)]
  260. inherits = *FLEX*
  261. filament_vendor = ColorFabb
  262. filament_cost = 58.30
  263. filament_density = 1
  264. bed_temperature = 85
  265. bridge_fan_speed = 40
  266. cooling = 1
  267. disable_fan_first_layers = 3
  268. extrusion_multiplier = 1
  269. fan_below_layer_time = 10
  270. filament_max_volumetric_speed = 5
  271. first_layer_bed_temperature = 85
  272. first_layer_temperature = 260
  273. max_fan_speed = 35
  274. min_fan_speed = 20
  275. temperature = 260
  276. filament_retract_length = nil
  277. filament_retract_lift = 0
  278. compatible_printers_condition =
  279.  
  280. [filament:Kimya PETG Carbon (Prusa)]
  281. inherits = *PET*
  282. filament_vendor = Kimya
  283. extrusion_multiplier = 1.05
  284. filament_cost = 150
  285. filament_density = 1.317
  286. filament_colour = #804040
  287. filament_max_volumetric_speed = 6
  288. first_layer_bed_temperature = 85
  289. first_layer_temperature = 240
  290. temperature = 240
  291. filament_retract_length = nil
  292. filament_retract_lift = 0.3
  293. start_filament_gcode = "M900 K0.06; Filament gcode LA 1.5\n"
  294.  
  295. [filament:Kimya ABS Carbon (Prusa)]
  296. inherits = *ABSC*
  297. filament_vendor = Kimya
  298. filament_cost = 140.4
  299. filament_density = 1.032
  300. filament_colour = #804040
  301. filament_max_volumetric_speed = 6
  302. first_layer_temperature = 260
  303. temperature = 260
  304.  
  305. [filament:Kimya ABS Kevlar (Prusa)]
  306. inherits = *ABSC*
  307. filament_vendor = Kimya
  308. filament_cost = 140.4
  309. filament_density = 1.037
  310. filament_colour = #804040
  311. filament_max_volumetric_speed = 6
  312. first_layer_temperature = 260
  313. temperature = 260
  314.  
  315. [filament:E3D Edge (Prusa)]
  316. inherits = *PET*
  317. filament_vendor = E3D
  318. filament_cost = 56.9
  319. filament_density = 1.26
  320. filament_type = EDGE
  321. compatible_printers_condition =
  322.  
  323. [filament:E3D PC-ABS (Prusa)]
  324. inherits = *ABS*
  325. filament_vendor = E3D
  326. filament_cost = 0
  327. filament_type = PC
  328. filament_density = 1.05
  329. first_layer_temperature = 270
  330. temperature = 270
  331.  
  332. [filament:Fillamentum PLA (Prusa)]
  333. inherits = *PLA*
  334. filament_vendor = Fillamentum
  335. filament_cost = 21.99
  336. filament_density = 1.24
  337. filament_spool_weight = 230
  338.  
  339. [filament:Fillamentum ABS (Prusa)]
  340. inherits = *ABSC*
  341. filament_vendor = Fillamentum
  342. filament_cost = 32.4
  343. filament_density = 1.04
  344. filament_spool_weight = 230
  345. first_layer_temperature = 240
  346. temperature = 240
  347.  
  348. [filament:Fillamentum ASA (Prusa)]
  349. inherits = *ABS*
  350. filament_vendor = Fillamentum
  351. filament_cost = 38.7
  352. filament_density = 1.07
  353. filament_spool_weight = 230
  354. fan_always_on = 1
  355. cooling = 1
  356. min_fan_speed = 20
  357. max_fan_speed = 20
  358. min_print_speed = 15
  359. slowdown_below_layer_time = 15
  360. first_layer_temperature = 265
  361. temperature = 265
  362. filament_type = ASA
  363.  
  364. [filament:Prusament ASA (Prusa)]
  365. inherits = *ABS*
  366. filament_vendor = Prusa Polymers
  367. filament_cost = 35.28
  368. filament_density = 1.07
  369. filament_spool_weight = 201
  370. fan_always_on = 1
  371. first_layer_temperature = 260
  372. first_layer_bed_temperature = 105
  373. temperature = 260
  374. bed_temperature = 110
  375. cooling = 1
  376. min_fan_speed = 20
  377. max_fan_speed = 20
  378. bridge_fan_speed = 30
  379. min_print_speed = 15
  380. slowdown_below_layer_time = 15
  381. disable_fan_first_layers = 4
  382. filament_type = ASA
  383. filament_colour = #FFF2EC
  384. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  385.  
  386. [filament:Prusament PC Blend (Prusa)]
  387. inherits = *ABS*
  388. filament_vendor = Prusa Polymers
  389. filament_cost = 49.99
  390. filament_density = 1.22
  391. filament_spool_weight = 201
  392. fan_always_on = 0
  393. first_layer_temperature = 275
  394. first_layer_bed_temperature = 110
  395. temperature = 275
  396. bed_temperature = 115
  397. cooling = 1
  398. min_fan_speed = 20
  399. max_fan_speed = 20
  400. bridge_fan_speed = 30
  401. min_print_speed = 15
  402. slowdown_below_layer_time = 20
  403. disable_fan_first_layers = 4
  404. fan_below_layer_time = 30
  405. filament_type = PC
  406. filament_colour = #DEE0E6
  407. filament_max_volumetric_speed = 8
  408. filament_retract_length = 1
  409. filament_retract_lift = 0.2
  410. compatible_printers_condition =
  411. start_filament_gcode = "M900 K0.07; Filament gcode LA 1.5\n"
  412.  
  413. [filament:Prusament PC Blend @MK2 (Prusa)]
  414. inherits = *ABS*
  415. filament_vendor = Prusa Polymers
  416. filament_cost = 49.99
  417. filament_density = 1.22
  418. filament_spool_weight = 201
  419. fan_always_on = 0
  420. first_layer_temperature = 275
  421. first_layer_bed_temperature = 105
  422. temperature = 275
  423. bed_temperature = 110
  424. cooling = 1
  425. min_fan_speed = 20
  426. max_fan_speed = 20
  427. min_print_speed = 15
  428. bridge_fan_speed = 30
  429. slowdown_below_layer_time = 20
  430. disable_fan_first_layers = 6
  431. fan_below_layer_time = 30
  432. filament_type = PC
  433. filament_colour = #DEE0E6
  434. filament_max_volumetric_speed = 8
  435. filament_retract_length = 1
  436. filament_retract_lift = 0.2
  437. compatible_printers_condition =
  438. start_filament_gcode = "M900 K0.07; Filament gcode LA 1.5\n"
  439.  
  440. [filament:Prusament PC Blend @MK2MMU1 (Prusa)]
  441. inherits = Prusament PC Blend @MK2
  442. filament_retract_length = nil
  443. filament_retract_lift = 0.2
  444. compatible_printers_condition =
  445. start_filament_gcode = "M900 K200 ; Filament gcode LA 1.0"
  446.  
  447. [filament:Fillamentum CPE (Prusa)]
  448. inherits = *PET*
  449. filament_vendor = Fillamentum
  450. filament_cost = 34.99
  451. filament_density = 1.25
  452. filament_spool_weight = 230
  453. filament_type = CPE
  454. first_layer_bed_temperature = 90
  455. first_layer_temperature = 275
  456. max_fan_speed = 50
  457. min_fan_speed = 50
  458. temperature = 275
  459. start_filament_gcode = "M900 K0.07; Filament gcode LA 1.5\n"
  460.  
  461. [filament:Fillamentum Timberfill (Prusa)]
  462. inherits = *PLA*
  463. filament_vendor = Fillamentum
  464. compatible_printers_condition =
  465. extrusion_multiplier = 1.1
  466. filament_cost = 68
  467. filament_density = 1.15
  468. filament_spool_weight = 230
  469. filament_colour = #804040
  470. filament_max_volumetric_speed = 10
  471. first_layer_temperature = 190
  472. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  473. temperature = 190
  474. filament_retract_lift = 0.2
  475.  
  476. [filament:Smartfil Wood (Prusa)]
  477. inherits = *PLA*
  478. filament_vendor = Smart Materials 3D
  479. compatible_printers_condition =
  480. extrusion_multiplier = 1.1
  481. filament_cost = 68
  482. filament_density = 1.58
  483. filament_colour = #804040
  484. filament_max_volumetric_speed = 9
  485. first_layer_temperature = 220
  486. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  487. temperature = 220
  488. filament_retract_lift = 0.2
  489.  
  490. [filament:Generic ABS (Prusa)]
  491. inherits = *ABSC*
  492. filament_vendor = Generic
  493. filament_cost = 27.82
  494. filament_density = 1.04
  495.  
  496. [filament:Esun ABS (Prusa)]
  497. inherits = *ABSC*
  498. filament_vendor = Esun
  499. filament_cost = 27.82
  500. filament_density = 1.04
  501.  
  502. [filament:Hatchbox ABS (Prusa)]
  503. inherits = *ABSC*
  504. filament_vendor = Hatchbox
  505. filament_cost = 27.82
  506. filament_density = 1.04
  507. filament_spool_weight = 225
  508.  
  509. [filament:Plasty Mladec ABS (Prusa)]
  510. inherits = *ABSC*
  511. filament_vendor = Plasty Mladec
  512. filament_cost = 27.82
  513. filament_density = 1.08
  514. filament_spool_weight = 230
  515.  
  516. [filament:Verbatim ABS (Prusa)]
  517. inherits = *ABSC*
  518. filament_vendor = Verbatim
  519. filament_cost = 25.87
  520. filament_density = 1.05
  521. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  522.  
  523. [filament:Generic PETG (Prusa)]
  524. inherits = *PET*
  525. renamed_from = "Generic PET"
  526. filament_vendor = Generic
  527. filament_cost = 27.82
  528. filament_density = 1.27
  529.  
  530. [filament:Plasty Mladec PETG (Prusa)]
  531. inherits = *PET*
  532. filament_vendor = Plasty Mladec
  533. filament_cost = 27.82
  534. filament_density = 1.27
  535. filament_spool_weight = 230
  536.  
  537. [filament:Generic PLA (Prusa)]
  538. inherits = *PLA*
  539. filament_vendor = Generic
  540. filament_cost = 25.4
  541. filament_density = 1.24
  542.  
  543. [filament:Devil Design PLA (Prusa)]
  544. inherits = *PLA*
  545. filament_vendor = Devil Design
  546. filament_cost = 20.99
  547. filament_density = 1.24
  548.  
  549. [filament:Devil Design PETG (Prusa)]
  550. inherits = *PET*
  551. filament_vendor = Devil Design
  552. filament_cost = 20.99
  553. filament_density = 1.23
  554. first_layer_temperature = 230
  555. first_layer_bed_temperature = 85
  556. temperature = 230
  557. bed_temperature = 90
  558.  
  559. [filament:Spectrum PLA (Prusa)]
  560. inherits = *PLA*
  561. filament_vendor = Spectrum
  562. filament_cost = 21.50
  563. filament_density = 1.24
  564.  
  565. [filament:Generic FLEX (Prusa)]
  566. inherits = *FLEX*
  567. filament_vendor = Generic
  568. filament_cost = 82
  569. filament_density = 1.22
  570. filament_max_volumetric_speed = 1.2
  571. filament_retract_length = 0
  572. filament_retract_speed = nil
  573. filament_retract_lift = nil
  574.  
  575. [filament:Fillamentum Flexfill 92A (Prusa)]
  576. inherits = *FLEX*
  577. filament_vendor = Fillamentum
  578. filament_cost = 33.99
  579. filament_density = 1.20
  580. filament_spool_weight = 230
  581. filament_max_volumetric_speed = 1.2
  582. filament_retract_length = 0
  583. filament_retract_speed = nil
  584. filament_retract_lift = nil
  585. fan_always_on = 1
  586. cooling = 0
  587. max_fan_speed = 50
  588. min_fan_speed = 50
  589. disable_fan_first_layers = 5
  590.  
  591. [filament:SainSmart TPU (Prusa)]
  592. inherits = *FLEX*
  593. filament_vendor = SainSmart
  594. fan_always_on = 1
  595. filament_max_volumetric_speed = 2.5
  596. extrusion_multiplier = 1.1
  597. first_layer_temperature = 230
  598. first_layer_bed_temperature = 50
  599. temperature = 230
  600. bed_temperature = 50
  601. bridge_fan_speed = 100
  602. max_fan_speed = 80
  603. min_fan_speed = 80
  604. filament_retract_before_travel = 3
  605. filament_cost = 32.99
  606. filament_density = 1.21
  607. filament_retract_length = 1
  608. filament_retract_speed = nil
  609. filament_deretract_speed = 25
  610. filament_retract_lift = 0
  611. filament_wipe = 0
  612. disable_fan_first_layers = 3
  613. min_print_speed = 15
  614. slowdown_below_layer_time = 10
  615. cooling = 1
  616.  
  617. [filament:Filatech FilaFlex40 (Prusa)]
  618. inherits = *FLEX*
  619. filament_vendor = Filatech
  620. fan_always_on = 1
  621. filament_max_volumetric_speed = 2.5
  622. extrusion_multiplier = 1.1
  623. first_layer_temperature = 230
  624. first_layer_bed_temperature = 50
  625. temperature = 230
  626. bed_temperature = 50
  627. bridge_fan_speed = 100
  628. max_fan_speed = 50
  629. min_fan_speed = 50
  630. filament_retract_before_travel = 3
  631. filament_cost = 34.99
  632. filament_density = 1.22
  633. filament_retract_length = 2
  634. filament_retract_speed = 50
  635. filament_deretract_speed = 25
  636. filament_retract_lift = 0
  637. filament_wipe = 0
  638. disable_fan_first_layers = 3
  639. min_print_speed = 15
  640. slowdown_below_layer_time = 10
  641. cooling = 1
  642.  
  643. [filament:Polymaker PC-Max (Prusa)]
  644. inherits = *ABS*
  645. filament_vendor = Polymaker
  646. filament_cost = 77.3
  647. filament_density = 1.20
  648. filament_type = PC
  649. bed_temperature = 115
  650. filament_colour = #FFF2EC
  651. first_layer_bed_temperature = 100
  652. first_layer_temperature = 270
  653. temperature = 270
  654. bridge_fan_speed = 0
  655. filament_max_volumetric_speed = 8
  656.  
  657. [filament:PrimaSelect PVA+ (Prusa)]
  658. inherits = *PLA*
  659. filament_vendor = PrimaSelect
  660. filament_cost = 45.01
  661. filament_density = 1.23
  662. cooling = 0
  663. fan_always_on = 0
  664. filament_colour = #FFFFD7
  665. filament_max_volumetric_speed = 3.8
  666. filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  667. filament_soluble = 1
  668. filament_type = PVA
  669. first_layer_temperature = 195
  670. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  671. temperature = 195
  672.  
  673. [filament:Prusa ABS (Prusa)]
  674. inherits = *ABSC*
  675. filament_vendor = Made for Prusa
  676. filament_cost = 22.99
  677. filament_density = 1.08
  678. filament_spool_weight = 230
  679.  
  680. [filament:Prusa HIPS (Prusa)]
  681. inherits = *ABS*
  682. filament_vendor = Made for Prusa
  683. filament_cost = 27.3
  684. filament_density = 1.04
  685. filament_spool_weight = 230
  686. bridge_fan_speed = 50
  687. cooling = 1
  688. extrusion_multiplier = 1
  689. fan_always_on = 1
  690. fan_below_layer_time = 10
  691. filament_colour = #FFFFD7
  692. filament_soluble = 1
  693. filament_type = HIPS
  694. first_layer_temperature = 220
  695. max_fan_speed = 20
  696. min_fan_speed = 20
  697. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  698. temperature = 220
  699.  
  700. [filament:Generic HIPS (Prusa)]
  701. inherits = *ABS*
  702. filament_vendor = Generic
  703. filament_cost = 27.3
  704. filament_density = 1.04
  705. bridge_fan_speed = 50
  706. cooling = 1
  707. extrusion_multiplier = 1
  708. fan_always_on = 1
  709. fan_below_layer_time = 10
  710. filament_colour = #FFFFD7
  711. filament_soluble = 1
  712. filament_type = HIPS
  713. first_layer_temperature = 230
  714. max_fan_speed = 20
  715. min_fan_speed = 20
  716. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  717. temperature = 230
  718.  
  719. [filament:Prusa PETG (Prusa)]
  720. inherits = *PET*
  721. renamed_from = "Prusa PET"
  722. filament_vendor = Made for Prusa
  723. filament_cost = 22.99
  724. filament_density = 1.27
  725. filament_spool_weight = 230
  726. compatible_printers_condition =
  727.  
  728. [filament:Verbatim PETG (Prusa)]
  729. inherits = *PET*
  730. filament_vendor = Verbatim
  731. filament_cost = 27.90
  732. filament_density = 1.27
  733. compatible_printers_condition =
  734.  
  735. [filament:Fiberlogy PETG (Prusa)]
  736. inherits = *PET*
  737. filament_vendor = Fiberlogy
  738. filament_cost = 21.50
  739. filament_density = 1.27
  740. compatible_printers_condition =
  741.  
  742. [filament:Prusament PETG (Prusa)]
  743. inherits = *PET*
  744. filament_vendor = Prusa Polymers
  745. first_layer_temperature = 240
  746. temperature = 250
  747. filament_cost = 29.99
  748. filament_density = 1.27
  749. filament_spool_weight = 201
  750. filament_type = PETG
  751. compatible_printers_condition =
  752.  
  753. [filament:Prusa PLA (Prusa)]
  754. inherits = *PLA*
  755. filament_vendor = Made for Prusa
  756. filament_cost = 20.99
  757. filament_density = 1.24
  758. filament_spool_weight = 230
  759.  
  760. [filament:Fiberlogy PLA (Prusa)]
  761. inherits = *PLA*
  762. filament_vendor = Fiberlogy
  763. filament_cost = 25.4
  764. filament_density = 1.24
  765.  
  766. [filament:Plasty Mladec PLA (Prusa)]
  767. inherits = *PLA*
  768. filament_vendor = Plasty Mladec
  769. filament_cost = 25.4
  770. filament_density = 1.24
  771. filament_spool_weight = 230
  772.  
  773. [filament:AmazonBasics PLA (Prusa)]
  774. inherits = *PLA*
  775. filament_vendor = AmazonBasics
  776. filament_cost = 25.4
  777. filament_density = 1.24
  778.  
  779. [filament:Hatchbox PLA (Prusa)]
  780. inherits = *PLA*
  781. filament_vendor = Hatchbox
  782. filament_cost = 25.4
  783. filament_density = 1.24
  784. filament_spool_weight = 225
  785.  
  786. [filament:Esun PLA (Prusa)]
  787. inherits = *PLA*
  788. filament_vendor = Esun
  789. filament_cost = 25.4
  790. filament_density = 1.24
  791.  
  792. [filament:Das Filament PLA (Prusa)]
  793. inherits = *PLA*
  794. filament_vendor = Das Filament
  795. filament_cost = 25.4
  796. filament_density = 1.24
  797.  
  798. [filament:EUMAKERS PLA (Prusa)]
  799. inherits = *PLA*
  800. filament_vendor = EUMAKERS
  801. filament_cost = 25.4
  802. filament_density = 1.24
  803.  
  804. [filament:Floreon3D PLA (Prusa)]
  805. inherits = *PLA*
  806. filament_vendor = Floreon3D
  807. filament_cost = 25.4
  808. filament_density = 1.24
  809.  
  810. [filament:Prusament PLA (Prusa)]
  811. inherits = *PLA*
  812. filament_vendor = Prusa Polymers
  813. temperature = 215
  814. filament_cost = 24.99
  815. filament_density = 1.24
  816. filament_spool_weight = 201
  817. filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
  818.  
  819. [filament:SemiFlex or Flexfill 98A (Prusa)]
  820. inherits = *FLEX*
  821. filament_vendor = Generic
  822. filament_cost = 33.99
  823. filament_density = 1.22
  824. filament_max_volumetric_speed = 1.35
  825.  
  826. [filament:Fillamentum Flexfill 98A (Prusa)]
  827. inherits = *FLEX*
  828. filament_vendor = Fillamentum
  829. filament_cost = 33.99
  830. filament_density = 1.23
  831. filament_spool_weight = 230
  832. filament_max_volumetric_speed = 1.35
  833. fan_always_on = 1
  834. cooling = 0
  835. max_fan_speed = 50
  836. min_fan_speed = 50
  837. disable_fan_first_layers = 5
  838.  
  839. [filament:Taulman Bridge (Prusa)]
  840. inherits = *common*
  841. filament_vendor = Taulman
  842. filament_cost = 40
  843. filament_density = 1.13
  844. bed_temperature = 90
  845. bridge_fan_speed = 40
  846. cooling = 0
  847. disable_fan_first_layers = 3
  848. fan_always_on = 0
  849. fan_below_layer_time = 20
  850. filament_colour = #DEE0E6
  851. filament_max_volumetric_speed = 7
  852. filament_soluble = 0
  853. filament_type = NYLON
  854. first_layer_bed_temperature = 60
  855. first_layer_temperature = 240
  856. max_fan_speed = 0
  857. min_fan_speed = 0
  858. start_filament_gcode = "M900 K0.08; Filament gcode LA 1.5\n"
  859. temperature = 250
  860.  
  861. [filament:Fillamentum Nylon FX256 (Prusa)]
  862. inherits = *common*
  863. filament_vendor = Fillamentum
  864. filament_cost = 56.99
  865. filament_density = 1.01
  866. filament_spool_weight = 230
  867. bed_temperature = 90
  868. bridge_fan_speed = 30
  869. cooling = 1
  870. disable_fan_first_layers = 6
  871. fan_always_on = 0
  872. fan_below_layer_time = 20
  873. min_print_speed = 15
  874. slowdown_below_layer_time = 20
  875. filament_colour = #DEE0E6
  876. filament_max_volumetric_speed = 6
  877. filament_soluble = 0
  878. filament_type = NYLON
  879. first_layer_bed_temperature = 90
  880. first_layer_temperature = 250
  881. max_fan_speed = 0
  882. min_fan_speed = 0
  883. start_filament_gcode = "M900 K0.1; Filament gcode LA 1.5\n"
  884. temperature = 250
  885.  
  886. [filament:Taulman T-Glase (Prusa)]
  887. inherits = *PET*
  888. filament_vendor = Taulman
  889. filament_cost = 40
  890. filament_density = 1.27
  891. bridge_fan_speed = 40
  892. cooling = 0
  893. fan_always_on = 0
  894. first_layer_bed_temperature = 90
  895. first_layer_temperature = 240
  896. max_fan_speed = 5
  897. min_fan_speed = 0
  898. start_filament_gcode = "M900 K0.06; Filament gcode LA 1.5\n"
  899.  
  900. [filament:Verbatim PLA (Prusa)]
  901. inherits = *PLA*
  902. filament_vendor = Verbatim
  903. filament_cost = 42.99
  904. filament_density = 1.24
  905.  
  906. [filament:Verbatim BVOH (Prusa)]
  907. inherits = *common*
  908. filament_vendor = Verbatim
  909. filament_cost = 79.99
  910. filament_density = 1.23
  911. bed_temperature = 60
  912. bridge_fan_speed = 100
  913. cooling = 0
  914. disable_fan_first_layers = 1
  915. extrusion_multiplier = 1
  916. fan_always_on = 0
  917. fan_below_layer_time = 100
  918. filament_colour = #FFFFD7
  919. filament_max_volumetric_speed = 4
  920. filament_soluble = 1
  921. filament_type = PVA
  922. first_layer_bed_temperature = 60
  923. first_layer_temperature = 215
  924. max_fan_speed = 100
  925. min_fan_speed = 100
  926. start_filament_gcode = "M900 K0.04; Filament gcode LA 1.5\n"
  927. temperature = 210
  928.  
  929. [filament:Verbatim PP (Prusa)]
  930. inherits = *common*
  931. filament_vendor = Verbatim
  932. filament_cost = 72
  933. filament_density = 0.89
  934. bed_temperature = 100
  935. bridge_fan_speed = 100
  936. cooling = 1
  937. disable_fan_first_layers = 2
  938. extrusion_multiplier = 1
  939. fan_always_on = 1
  940. fan_below_layer_time = 100
  941. filament_colour = #DEE0E6
  942. filament_max_volumetric_speed = 5
  943. filament_type = PP
  944. first_layer_bed_temperature = 100
  945. first_layer_temperature = 220
  946. max_fan_speed = 100
  947. min_fan_speed = 100
  948. start_filament_gcode = "M900 K0 ; Filament gcode"
  949. temperature = 220
  950.  
  951.  
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×