Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2017.09 (Jan 04 2018 - 15:05:56)
- Trying to boot from MMC1
- reading u-boot.img
- reading u-boot.img
- U-Boot 2017.09 (Jan 04 2018 - 15:05:56 +0530)
- CPU : AM335X-GP rev 2.1
- I2C: ready
- DRAM: 512 MiB
- No match for driver 'omap_hsmmc'
- No match for driver 'omap_hsmmc'
- Some drivers were not found
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Net: cpsw, usb_ether
- Press SPACE to abort autoboot in 2 seconds
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- reading boot.scr
- ** Unable to read file boot.scr **
- reading uEnv.txt
- ** Unable to read file uEnv.txt **
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- 4035768 bytes read in 318 ms (12.1 MiB/s)
- 88643 bytes read in 26 ms (3.3 MiB/s)
- ## Flattened Device Tree blob at 88000000
- Booting using the fdt blob at 0x88000000
- Loading Device Tree to 8ffe7000, end 8ffffa42 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.73 (oe-user@oe-host) (gcc version 7.2.0 (GCC) ) #1 SMP Wed Jan 24 09:53:22 IST 2018
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone
- [ 0.000000] cma: Reserved 16 MiB at 0x9e800000
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] AM335X ES2.1 (sgx neon)
- [ 0.000000] percpu: Embedded 15 pages/cpu @df903000 s31592 r8192 d21656 u61440
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129412
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=3155ca9a-02 rw rootfstype=ext4 rootwait
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 479056K/522240K available (8192K kernel code, 783K rwdata, 2584K rodata, 1024K init, 8126K bss, 26800K reserved, 16384K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB)
- [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB)
- [ 0.000000] .data : 0xc0d00000 - 0xc0dc3cd4 ( 784 kB)
- [ 0.000000] .bss : 0xc0dc5000 - 0xc15b48f0 (8127 kB)
- [ 0.000000] Running RCU self tests
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU lockdep checking is enabled.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
- [ 0.000022] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.000051] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000116] OMAP clocksource: timer1 at 24000000 Hz
- [ 0.001498] clocksource_probe: no matching clocksources found
- [ 0.002471] Console: colour dummy device 80x30
- [ 0.002527] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.002536] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.002544] ... MAX_LOCK_DEPTH: 48
- [ 0.002551] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.002559] ... CLASSHASH_SIZE: 4096
- [ 0.002567] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.002574] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.002581] ... CHAINHASH_SIZE: 32768
- [ 0.002589] memory used by lock dependency info: 5167 kB
- [ 0.002596] per task-struct memory footprint: 1536 bytes
- [ 0.002632] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
- [ 0.076169] pid_max: default: 32768 minimum: 301
- [ 0.076664] Security Framework initialized
- [ 0.076807] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.076820] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.080296] CPU: Testing write buffer coherency: ok
- [ 0.081799] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.081869] Setting up static identity map for 0x80100000 - 0x80100070
- [ 0.086240] Brought up 1 CPUs
- [ 0.086263] SMP: Total of 1 processors activated (996.14 BogoMIPS).
- [ 0.086272] CPU: All CPU(s) started in SVC mode.
- [ 0.090143] devtmpfs: initialized
- [ 0.191818] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.192729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.192794] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.194430] pinctrl core: initialized pinctrl subsystem
- [ 0.199500] NET: Registered protocol family 16
- [ 0.205340] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.373653] omap_hwmod: debugss: _wait_target_disable failed
- [ 0.429915] cpuidle: using governor menu
- [ 0.448985] OMAP GPIO hardware version 0.1
- [ 0.505784] No ATAGs?
- [ 0.505816] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.506862] omap4_sram_init:Unable to allocate sram needed to handle errata I688
- [ 0.506890] omap4_sram_init:Unable to get sram pool needed to handle errata I688
- [ 0.557036] edma 49000000.edma: TI EDMA DMA engine driver
- [ 0.564506] SCSI subsystem initialized
- [ 0.566473] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
- [ 0.570062] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
- [ 0.570669] pps_core: LinuxPPS API ver. 1 registered
- [ 0.570682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.570735] PTP clock support registered
- [ 0.575182] clocksource: Switched to clocksource timer1
- [ 0.679531] VFS: Disk quotas dquot_6.6.0
- [ 0.679719] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.711141] NET: Registered protocol family 2
- [ 0.713073] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.713170] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
- [ 0.714333] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.714540] UDP hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.714708] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.715675] NET: Registered protocol family 1
- [ 0.717802] RPC: Registered named UNIX socket transport module.
- [ 0.717827] RPC: Registered udp transport module.
- [ 0.717837] RPC: Registered tcp transport module.
- [ 0.717847] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.720940] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
- [ 0.726151] audit: initializing netlink subsys (disabled)
- [ 0.726404] audit: type=2000 audit(0.720:1): initialized
- [ 0.730329] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 0.733246] NFS: Registering the id_resolver key type
- [ 0.733579] Key type id_resolver registered
- [ 0.733593] Key type id_legacy registered
- [ 0.733748] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
- [ 0.739358] io scheduler noop registered
- [ 0.739385] io scheduler deadline registered
- [ 0.739505] io scheduler cfq registered (default)
- [ 0.741880] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 0.747072] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
- [ 0.754859] omap_uart 44e09000.serial: no wakeirq for uart0
- [ 0.755739] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0
- [ 1.437937] console [ttyO0] enabled
- [ 1.443525] [drm] Initialized
- [ 1.454753] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.461846] [drm] No driver support for vblank timestamp query.
- [ 1.498571] Console: switching to colour frame buffer device 60x34
- [ 1.506665] tilcdc 4830e000.lcdc: fb0: frame buffer device
- [ 1.512572] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
- [ 1.558633] brd: module loaded
- [ 1.586619] loop: module loaded
- [ 1.592875] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 1.602965] libphy: Fixed MDIO Bus: probed
- [ 1.685176] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
- [ 1.691554] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- [ 1.701431] libphy: 4a101000.mdio: probed
- [ 1.705788] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- [ 1.717041] cpsw 4a100000.ethernet: Detected MACID = 38:d2:69:93:aa:20
- [ 1.731227] mousedev: PS/2 mouse device common for all mice
- [ 1.737189] i2c /dev entries driver
- [ 1.745878] omap_hsmmc 48060000.mmc: Got CD GPIO
- [ 1.754322] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.761774] oprofile: using arm/armv7
- [ 1.766538] Initializing XFRM netlink socket
- [ 1.771360] NET: Registered protocol family 10
- [ 1.779405] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 1.788333] NET: Registered protocol family 17
- [ 1.793056] NET: Registered protocol family 15
- [ 1.798168] Key type dns_resolver registered
- [ 1.802862] omap_voltage_late_init: Voltage driver support not added
- [ 1.809595] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize
- [ 1.818069] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize
- [ 1.827298] ThumbEE CPU extension supported.
- [ 1.831781] Registering SWP/SWPB emulation handler
- [ 1.836858] SmartReflex Class3 initialized
- [ 1.903721] random: fast init done
- [ 1.919744] tps65217 0-0024: TPS65217 ID 0xe version 1.2
- [ 1.925970] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [ 1.933382] omap_hsmmc 48060000.mmc: Got CD GPIO
- [ 1.998410] hctosys: unable to open rtc device (rtc0)
- [ 2.003773] sr_init: No PMIC hook to init smartreflex
- [ 2.009458] sr_init: platform driver register failed for SR
- [ 2.016375] vmmcsd_fixed: disabling
- [ 2.027032] Waiting for root device PARTUUID=3155ca9a-02...
- [ 2.134614] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 2.147693] mmc0: new high speed SDHC card at address e624
- [ 2.157270] mmcblk0: mmc0:e624 SU08G 7.40 GiB
- [ 2.170496] mmcblk0: p1 p2
- [ 2.485724] EXT4-fs (mmcblk0p2): recovery complete
- [ 2.494607] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.503409] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 2.522991] devtmpfs: mounted
- [ 2.528270] Freeing unused kernel memory: 1024K
- INIT: version 2.88 booting
- Starting udev
- [ 3.515760] udevd[100]: starting version 3.2.2
- [ 3.679961] udevd[101]: starting eudev-3.2.2
- [ 4.057940] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 4.181439] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1000000 KHz
- [ 4.189641] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1000000000 (-34)
- [ 4.236439] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 4.379052] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
- [ 4.406426] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 720000 KHz
- [ 4.649809] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
- [ 5.187033] omap_i2c 4819c000.i2c: timeout waiting for bus ready
- [ 5.523528] TI-am335x-tsc TI-am335x-tsc: ti,charge-delay not specified
- [ 5.532233] input: ti-tsc as /devices/platform/ocp/44e0d000.tscadc/TI-am335x-tsc/input/input1
- [ 6.255513] omap_i2c 4819c000.i2c: timeout waiting for bus ready
- [ 7.305460] omap_i2c 4819c000.i2c: timeout waiting for bus ready
- [ 8.250837] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 8.365535] omap_i2c 4819c000.i2c: timeout waiting for bus ready
- [ 8.399084] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 10.198423] 47401300.usb-phy supply vcc not found, using dummy regulator
- [ 10.208514] 47401b00.usb-phy supply vcc not found, using dummy regulator
- [ 10.272408] usbcore: registered new interface driver usbfs
- [ 10.279117] usbcore: registered new interface driver hub
- [ 10.285187] usbcore: registered new device driver usb
- [ 10.602696] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- [ 10.610102] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
- [ 10.982403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 10.989778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 10.997385] usb usb1: Product: MUSB HDRC host driver
- [ 11.002601] usb usb1: Manufacturer: Linux 4.9.73 musb-hcd
- [ 11.008290] usb usb1: SerialNumber: musb-hdrc.1.auto
- [ 11.111053] hub 1-0:1.0: USB hub found
- [ 11.120394] hub 1-0:1.0: 1 port detected
- [ 11.318263] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
- Sat Jan 27 11:13:33 UTC 2018
- ALSA: Restoring mixer settings...
- /usr/sbin/alsactl: load_state:1735: No soundcards found...
- INIT: Entering runlevel: 5
- Configuring network interfaces... [ 13.585616] usb 1-1: new low-speed USB device number 2 using musb-hdrc
- [ 13.749978] net eth0: initializing cpsw version 1.12 (0)
- [ 13.796142] usb 1-1: New USB device found, idVendor=1a2c, idProduct=0023
- [ 13.803185] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 13.810800] usb 1-1: Product: USB Keykoard
- [ 13.815128] usb 1-1: Manufacturer: USB
- [ 13.856394] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
- [ 13.889578] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.936412] usbcore: registered new interface driver usbhid
- [ 13.942270] usbhid: USB HID core driver
- [ 13.980946] input: USB USB Keykoard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.0/0003:1A2C:0023.0001/input/input2
- done.
- [ 14.068073] hid-generic 0003:1A2C:0023.0001: input: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-musb-hdrc.1.auto-1/input0
- [ 14.081805] usbcore: registered new interface driver usbkbd
- [ 14.112893] input: USB USB Keykoard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.1/0003:1A2C:0023.0002/input/input3
- [ 14.198440] hid-generic 0003:1A2C:0023.0002: input: USB HID v1.10 Device [USB USB Keykoard] on usb-musb-hdrc.1.auto-1/input1
- Starting system message bus: dbus.
- Starting Connection Manager
- Starting Xserver
- Starting Dropbear SSH server:
- dropbear.
- Starting rpcbind daemon...
- X.Org X Server 1.19.3
- Release Date: 2017-03-15
- X Protocol Version 11, Revision 0
- Build Operating System: Linux 4.14.9-1-ARCH x86_64
- Current Operating System: Linux beaglebone 4.9.73 #1 SMP Wed Jan 24 09:53:22 IST 2018 armv7l
- Kernel command line: console=ttyO0,115200n8 root=PARTUUID=3155ca9a-02 rw rootfstype=ext4 rootwait
- Build Date: 04 January 2018 05:24:11AM
- Current version of pixman: 0.34.0
- Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 27 11:13:37 2018
- (==) Using config file: "/etc/X11/xorg.conf"
- (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- done.
- Starting bluetooth: gbm: failed to open any driver (search paths /usr/lib/dri)
- gbm: Last dlopen error: /usr/lib/dri/tilcdc_dri.so: cannot open shared object file: No such file or directory
- failed to load driver: tilcdc
- gbm: failed to open any driver (search paths /usr/lib/dri)
- gbm: Last dlopen error: /usr/lib/dri/kms_swrast_dri.so: cannot open shared object file: No such file or directory
- failed to load driver: kms_swrast
- bluetoothd.
- Starting syslogd/klogd: [ 16.659351] Bluetooth: Core ver 2.22
- [ 16.663422] NET: Registered protocol family 31
- [ 16.668209] Bluetooth: HCI device and connection manager initialized
- [ 16.675676] Bluetooth: HCI socket layer initialized
- [ 16.680857] Bluetooth: L2CAP socket layer initialized
- [ 16.686701] Bluetooth: SCO socket layer initialized
- done
- EGL_MESA_drm_image required.
- * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
- [ 17.103394] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 17.109220] Bluetooth: BNEP filters: protocol multicast
- [ 17.114809] Bluetooth: BNEP socket layer initialized
- ...done.
- Starting Telephony daemon
- Starting Linux NFC daemon
- D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-WEJDFIkvPY,guid=4fa5612a3db7ee6ab6d4a50b5a6c5ee4
- Poky (Yocto Project Reference Distro) 2.4.1 beaglebone /dev/ttyO0
- beaglebone login: INFO: width=480, height=272
- rmatchbox: Cant find a keycode for keysym 269025056
- matchbox: ignoring key shortcut XF86Calendar=!$contacts
- matchbox: Cant find a keycode for keysym 2809
- matchbox: ignoring key shortcut telephone=!$dates
- matchbox: Cant find a keycode for keysym 269025050
- matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
- Activating service name='org.a11y.atspi.Registry'
- Poky (Yocto Project Reference Distro) 2.4.1 beaglebone /dev/ttyO0
- beaglebone login:
- Poky (Yocto Project Reference Distro) 2.4.1 beaglebone /dev/ttyO0
- beaglebone login:
- Poky (Yocto Project Reference Distro) 2.4.1 beaglebone /dev/ttyO0
- beaglebone login: Successfully activated service 'org.a11y.atspi.Registry'
- SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
- [settings daemon] Forking. run with -n to prevent fork
- Connection failure: Connection refused
- pa_context_connect() failed: Connection refused
- ** (matchbox-panel:547): WARNING **: Failed to load applet "battery" (/usr/lib/matchbox-panel/libbattery.so: cannot open shared object file: No such file or directory).
- matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
- [ 29.369478] random: crng init done
- Poky (Yocto Project Reference Distro) 2.4.1 beaglebone /dev/ttyO0
- beaglebone login: root
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement