Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2018-01-07 06:31:28] [Output] : ★ Jonathan Rodriguez leans down, as he extends his right hand, grabbing the hood latch.
- [2018-01-07 06:31:39] [Output] : ★ Jonathan Rodriguez steps out of the car, as he heads towards the front end of the car.
- [2018-01-07 06:36:29] [Input] : me heads towards the workbench, as he puts on his gloves, grabbing his toolbox.
- [2018-01-07 06:36:29] [Output] : ★ Jonathan Rodriguez heads towards the workbench, as he puts on his gloves, grabbing his toolbox.
- [2018-01-07 06:36:41] [Output] : ★ Jonathan Rodriguez opens up the toolbox, as he grabs a 12mm ratchet.
- [2018-01-07 06:37:07] [Output] : ★ Jonathan Rodriguez sticks his hand deep inside the engine bay, as he finds the nuts for the right exhaust-.
- [2018-01-07 06:37:22] [Output] : ★ -..manifold, as he proceeds to start unbolting it, placing the bolts on the strut towers. ((Jonathan Rodriguez))
- [2018-01-07 06:39:04] [Output] : ★ Jonathan Rodriguez proceeds to head to the other header, as he proceeds to unbolt it aswell.
- [2018-01-07 06:39:16] [Output] : ★ Jonathan Rodriguez sticks his hand out of the engine bay, as he heads towards the lift, pressing a button as-..
- [2018-01-07 06:39:19] [Output] : ★ -..the BRZ lifts up. ((Jonathan Rodriguez))
- [2018-01-07 06:40:35] [Output] : ★ Jonathan Rodriguez heads towards the headers, as he proceeds to unbolt them from the downpipe.
- [2018-01-07 06:40:47] [Output] : ★ Jonathan Rodriguez extends both of his hands as he proceeds to unbolt the downpipe, disconnecting-..
- [2018-01-07 06:40:55] [Output] : ★ -..it from the catalytic converter, as he proceeds to throw it aside. ((Jonathan Rodriguez))
- [2018-01-07 06:41:08] [Output] : ★ Jonathan Rodriguez extends both of his hands, as he proceeds to pull out the headers from underneath the car.
- [2018-01-07 06:42:06] [Output] : ★ Jonathan Rodriguez heads towards the workbench, as he grabs the new turbo exhaust header 2-in-1 combo.
- [2018-01-07 06:45:47] [Output] : ★ Jonathan Rodriguez heads back towards the Subaru, as he proceeds to grab the new exhaust gaskets, as he-..
- [2018-01-07 06:45:54] [Output] : ★ -..then aligns them to the studs, pressing them in. ((Jonathan Rodriguez))
- [2018-01-07 06:46:34] [Output] : ★ Jonathan Rodriguez aligns the turbo manifold to both sides of the manifold, grabbing his ratchet as he holds-..
- [2018-01-07 06:46:45] [Output] : ★ -..it up with one of his hands, bolting it in with the other. ((Jonathan Rodriguez))
- [2018-01-07 06:46:56] [Output] : ★ Jonathan Rodriguez proceeds to lower the car afterwards.
- [2018-01-07 06:47:10] [Output] : ★ Jonathan Rodriguez proceeds to hit the button again to raise it as he forgot to mount the new oil pan.
- [2018-01-07 06:47:32] [Output] : ★ Jonathan Rodriguez heads towards the corner of the shop, as he grabs a barrell, placing it underneath the-..
- [2018-01-07 06:47:35] [Output] : ★ -..BRZ. ((Jonathan Rodriguez))
- [2018-01-07 06:47:42] [Output] : ★ Jonathan Rodriguez extends his right hand, proceeding to undo the drain plug.
- [2018-01-07 06:47:54] [Output] : ★ Jonathan Rodriguez extends his right hand in his back pocket, grabbing a cigarette from a pack, as he sticks-..
- [2018-01-07 06:48:05] [Output] : ★ -..it between his lips, lighting it up, taking a toke. ((Jonathan Rodriguez))
- [2018-01-07 06:49:53] [Output] : ★ Jonathan Rodriguez finishes up his cigarette as all the oil is drained.
- [2018-01-07 06:49:56] [Output] : ★ Jonathan Rodriguez pulls the barrel aside.
- [2018-01-07 06:50:06] [Output] : ★ Jonathan Rodriguez grabs an 8mm ratchet, as he proceeds to start undoing the bolts for the oil pan.
- [2018-01-07 06:51:09] [Output] : ★ Jonathan Rodriguez grabs the oil pan, as he proceeds to take it off, placing it on the ground.
- [2018-01-07 06:51:17] [Output] : ★ Jonathan Rodriguez grabs a small screwdriver, as he starts scraping off the oil pan gasket.
- [2018-01-07 06:51:29] [Output] : ★ Jonathan Rodriguez heads towards his workbench, as he proceeds to open up a box containing an oil pan-..
- [2018-01-07 06:52:08] [Output] : ★ -..with a pre-applied gasket, as he heads towards the car again. ((Jonathan Rodriguez))
- [2018-01-07 06:52:16] [Output] : ★ Jonathan Rodriguez lifts it up as he carefully aligns it, sticking two bolts onto each side.
- [2018-01-07 06:52:26] [Output] : ★ Jonathan Rodriguez proceeds to start bolting all the bolts in a cross pattern, torquing them carefully.
- [2018-01-07 06:52:40] [Output] : ★ Jonathan Rodriguez heads to the same oil pan box, as he grabs the oil feed lines for the turbocharger-..
- [2018-01-07 06:54:21] [Output] : ★ -..as he then proceeds to hastly throw it up the engine bay. ((Jonathan Rodriguez))
- [2018-01-07 06:54:26] [Output] : ★ Jonathan Rodriguez heads towards the lift, as he lowers the BRZ.
- [2018-01-07 06:54:40] [Output] : ★ Jonathan Rodriguez heads towards the turbo kit box again, as he grabs the 6266 turbocharger, as he heads-..
- [2018-01-07 06:54:43] [Output] : ★ -..back towards the car. ((Jonathan Rodriguez))
- [2018-01-07 06:54:53] [Output] : ★ Jonathan Rodriguez proceeds to place the turbocharger's gasket down onto the headers, as he then-..
- [2018-01-07 06:55:15] [Output] : ★ -..proceeds to place the turbocharger ontop, placing four studs in the holes and tightening- ((Jonathan Rodriguez))
- [2018-01-07 06:55:18] [Output] : ★ -..them with 8 nuts. ((Jonathan Rodriguez))
- [2018-01-07 06:58:06] [Output] : ★ Jonathan Rodriguez grabs the previously routed oil feed line, placing it on the turbocharger as he-..
- [2018-01-07 06:58:11] [Output] : ★ -..tightens it with a washer. ((Jonathan Rodriguez))
- [2018-01-07 06:58:26] [Output] : ★ Or actually 2 oil feed lines, cause I'm dumb* ((Jonathan Rodriguez))
- [2018-01-07 07:00:08] [Output] : ★ Jonathan Rodriguez heads towards the turbo kit box as he grabs the downpipe, heading back to the car.
- [2018-01-07 07:00:23] [Output] : ★ Jonathan Rodriguez proceeds to put the downpipe onto the turbocharger, as he then tightens it with a hose clamp
- [2018-01-07 07:00:27] [Output] : ★ Jonathan Rodriguez heads towards the lift again.
- [2018-01-07 07:00:35] [Output] : ★ Jonathan Rodriguez extends his right hand, turning the lift on, lifting the BRZ up.
- [2018-01-07 07:01:22] [Output] : ★ Jonathan Rodriguez proceeds to align the pipe with the catalytic converter, as he uses another clamp to-..
- [2018-01-07 07:01:25] [Output] : ★ -..keep them together. ((Jonathan Rodriguez))
- [2018-01-07 07:01:28] [Output] : ★ Jonathan Rodriguez heads towards the lift again.
- [2018-01-07 07:01:33] [Output] : ★ Jonathan Rodriguez extends his right hand. lowering the car.
- [2018-01-07 07:02:37] [Output] : ★ Jonathan Rodriguez heads back towards the engine bay, as he peers around the turbocharger assembly.
- [2018-01-07 07:02:50] [Output] : ★ Jonathan Rodriguez heads towards the bench, as he grabs a cone air filter for the turbocharger, as he heads-..
- [2018-01-07 07:03:01] [Output] : ★ -..towards the turbocharger, slotting it on. ((Jonathan Rodriguez))
- [2018-01-07 07:03:11] [Output] : ★ Jonathan Rodriguez grabs a hose clamp, as he tightens it.
- [2018-01-07 07:04:03] [Output] : ★ Jonathan Rodriguez proceeds to grab a screwdriver from his toolbox, as he heads towards the airbox.
- [2018-01-07 07:05:43] [Output] : ★ Jonathan Rodriguez proceeds to first disconnect it from the intake pipe, as he takes said pipe off.
- [2018-01-07 07:06:01] [Output] : ★ Jonathan Rodriguez proceeds to then head towards the airbox, as he unclamps it, throwing it off.
- [2018-01-07 07:08:07] [Output] : ★ Jonathan Rodriguez proceeds to head towards the workbench, grabbing the intercooler, as he heads to the-..
- [2018-01-07 07:08:09] [Output] : ★ -..front bumper. ((Jonathan Rodriguez))
- [2018-01-07 07:08:14] [Output] : VAT Member Zomp Ethan Price (Zomp) has closed your report.
- [2018-01-07 07:08:45] [Output] : ★ Jonathan Rodriguez grabs a 10mm ratchet, sticking his right hand inside the bumper, as he starts unbolting the
- [2018-01-07 07:08:51] [Output] : ★ -..bumper cover. ((Jonathan Rodriguez))
- [2018-01-07 07:08:59] [Output] : ★ Jonathan Rodriguez pulls off the bumper cover, as he takes a look at the bumper assembly.
- [2018-01-07 07:09:17] [Output] : ★ Jonathan Rodriguez grabs a magic marker from the toolbox, as he aligns the intercooler, marking a few spots.
- [2018-01-07 07:09:28] [Output] : ★ Jonathan Rodriguez heads towards the workbench again, grabbing a drill, as he plugs it in, heading towards-..
- [2018-01-07 07:09:30] [Output] : ★ -..the bumper again. ((Jonathan Rodriguez))
- [2018-01-07 07:09:43] [Output] : ★ Jonathan Rodriguez extends both of his hands, drilling 4 holes into the front bumper (not the cover).
- [2018-01-07 07:10:01] [Output] : ★ Jonathan Rodriguez proceeds to align the intercooler, as he grabs a few long screws, as he bolts it in using-..
- [2018-01-07 07:10:06] [Output] : ★ -..the drill ((Jonathan Rodriguez))
- [2018-01-07 07:15:31] [Output] : ★ Jonathan Rodriguez proceeds to grab a box of hoses for the kit, as he then places it next to the intercooler.
- [2018-01-07 07:15:53] [Output] : ★ Jonathan Rodriguez grabs one of the pipes, as he proceeds to place it into the intercooler, tightening a hose-.
- [2018-01-07 07:15:55] [Output] : ★ -..clamp around it. ((Jonathan Rodriguez))
- [2018-01-07 07:16:22] [Output] : ★ Jonathan Rodriguez proceeds to grab a small piece of piping, as he connects it to the turbocharger.
- [2018-01-07 07:16:57] [Output] : ★ Jonathan Rodriguez grabs a hose clamp, tightening it around the turbocharger.
- [2018-01-07 07:17:06] [Output] : ★ Jonathan Rodriguez proceeds to grab another hose, as he then directs that towards the intake.
- [2018-01-07 07:17:11] [Output] : ★ Jonathan Rodriguez tightens a hose clamp around said pipe.
- [2018-01-07 07:17:20] [Output] : ★ Jonathan Rodriguez grabs another small pipe, as that pipe would connect with the intake manifold, as he wraps-.
- [2018-01-07 07:17:23] [Output] : ★ -..a hose clamp around it. ((Jonathan Rodriguez))
- [2018-01-07 07:20:32] [Output] : ★ Jonathan Rodriguez proceeds to then grab a 10mm ratchet, as he starts unbolting the two fuel rails.
- [2018-01-07 07:20:41] [Output] : ★ Jonathan Rodriguez grabs a set of pliers, as he then disconnects the 4 wires for the injectors.
- [2018-01-07 07:20:51] [Output] : ★ Jonathan Rodriguez pulls the fuel rails slightly backwards, however not moving them much, therefore not-..
- [2018-01-07 07:20:56] [Output] : ★ -..needing to disconnect the fuel lines. ((Jonathan Rodriguez))
- [2018-01-07 07:24:08] [Output] : ★ Jonathan Rodriguez grabs the fuel injectors, slightly twisting them as he pulls on them.
- [2018-01-07 07:24:26] [Output] : ★ Jonathan Rodriguez proceeds to head to the turbo kit box again, grabbing the 1200CC injectors, as he-..
- [2018-01-07 07:24:30] [Output] : ★ -..heads towards the engine again. ((Jonathan Rodriguez))
- [2018-01-07 07:24:42] [Output] : ★ Jonathan Rodriguez proceeds to align the new seals, as he connects all four injectors in quick succession.
- [2018-01-07 07:24:50] [Output] : ★ Jonathan Rodriguez proceeds to align the rails with the same holes, as he then bolts them in.
- [2018-01-07 07:28:36] [Output] : ★ Jonathan Rodriguez extends his right hand, as he proceeds to close the hood.
- [2018-01-07 07:28:51] [Output] : ★ Jonathan Rodriguez extends his right hand, popping open the trunk, as he proceeds to lift up the mat and-..
- [2018-01-07 07:28:59] [Output] : ★ -..remove the spare wheel. ((Jonathan Rodriguez))
- [2018-01-07 07:29:12] [Output] : ★ Thus would reveal the fuel pump assembly. ((Jonathan Rodriguez))
- [2018-01-07 07:29:25] [Output] : ★ Jonathan Rodriguez heads back to the front, grabbing his toolbox, pulling it over.
- [2018-01-07 07:29:39] [Output] : ★ Jonathan Rodriguez grabs a pair of tweezers, as he proceeds to disconnect the power cable for the fuel-..
- [2018-01-07 07:29:41] [Output] : ★ -..pump. ((Jonathan Rodriguez))
- [2018-01-07 07:29:52] [Output] : ★ Jonathan Rodriguez proceeds to disconnect the vaccum lines, as he proceeds to slightly push them aside.
- [2018-01-07 07:30:07] [Output] : ★ Jonathan Rodriguez grabs a small screwdriver, as he undoes the fuel line clamps, pulling the fuel lines back.
- [2018-01-07 07:30:14] [Output] : ★ A little fuel would splash about. ((Jonathan Rodriguez))
- [2018-01-07 07:32:16] [Output] : ★ Jonathan Rodriguez grabs an 8mm ratchet, as he starts undoing the bolts for the fuel pump assembly.
- [2018-01-07 07:32:27] [Output] : ★ Jonathan Rodriguez extends both of his hands, proceeding to pull up the assembly, as he places it aside.
- [2018-01-07 07:32:35] [Output] : ★ Jonathan Rodriguez heads to the turbo kit box again, grabbing the DW45 fuel pump, heading to the back-..
- [2018-01-07 07:32:38] [Output] : ★ -..of the car again. ((Jonathan Rodriguez))
- [2018-01-07 07:32:49] [Output] : ★ Jonathan Rodriguez proceeds to carefully slot it in, as he aligns it with the holes.
- [2018-01-07 07:32:59] [Output] : ★ Jonathan Rodriguez grabs the tweezers, as he proceeds to pull out all the lines he's tucked in.
- [2018-01-07 07:33:07] [Output] : ★ Jonathan Rodriguez grabs the 8mm bolts, as he bolts them all in to spec.
- [2018-01-07 07:33:19] [Output] : ★ Jonathan Rodriguez proceeds to connect the two fuel lines, grabbing their hose clamps as he then-..
- [2018-01-07 07:33:23] [Output] : ★ -..tightens them using a screwdriver. ((Jonathan Rodriguez))
- [2018-01-07 07:35:07] [Output] : ★ Jonathan Rodriguez grabs the vaccum lines, as he slots them in, placing the appropriate washers.
- [2018-01-07 07:35:19] [Output] : ★ Jonathan Rodriguez finally grabs the power cord, as he connects it.
- [2018-01-07 07:35:41] [Output] : ★ Jonathan Rodriguez grabs the spare tire, putting it over the assembly, before throwing the mat back on.
- [2018-01-07 07:35:47] [Output] : ★ Jonathan Rodriguez closes the trunk, as he heads to the driverside door.
- [2018-01-07 07:35:56] [Output] : ★ Jonathan Rodriguez grabs a few screwdrivers with him on the way aswell, as he gets into the car.
- [2018-01-07 07:36:03] [Output] : ★ Jonathan Rodriguez turns the key in the ignition, the car fires right up.
- [2018-01-07 07:36:05] [Output] : *Jonathan Rodriguez presses on the key to lock the vehicle. ((2013 Subaru BRZ Limited))*
- [2018-01-07 07:36:17] [Output] : ★ Jonathan Rodriguez proceeds to stick it into first gear, slowly rolling it to the dyno.
- [2018-01-07 07:36:33] [Output] : ★ Jonathan Rodriguez grabs the screwdriver, as he uses it to remove the 4 bolts hiding the ECU compartiment.
- [2018-01-07 07:37:06] [Output] : ★ Jonathan Rodriguez flicks the key in the ignition, as he then proceeds to use the same screwdriver to unbolt-..
- [2018-01-07 07:37:18] [Output] : ★ -..the ECU assembly, as he then pulls it out. ((Jonathan Rodriguez))
- [2018-01-07 07:37:34] [Output] : ★ Jonathan Rodriguez gets out of the car, as he heads towards a box which has "ECUTEK" written on it-..
- [2018-01-07 07:37:41] [Output] : ★ -..as he cuts it up using a cutter, taking the new ECU out. ((Jonathan Rodriguez))
- [2018-01-07 07:37:55] [Output] : ★ Jonathan Rodriguez grabs the disk aswell, as he heads towards the BRZ.
- [2018-01-07 07:39:35] [Output] : ★ Jonathan Rodriguez steps inside of the BRZ again, as he then places the ECU back into the old spot-..
- [2018-01-07 07:39:39] [Output] : ★ -..as he proceeds to bolt it in. ((Jonathan Rodriguez))
- [2018-01-07 07:39:50] [Output] : ★ Jonathan Rodriguez heads towards the workbench, turning on his laptop.
- [2018-01-07 07:40:04] [Output] : ★ Jonathan Rodriguez extends his right hand aswell, as he turns on the dyno PC, clicking on the Mustang-..
- [2018-01-07 07:40:06] [Output] : ★ -..application. ((Jonathan Rodriguez))
- [2018-01-07 07:40:22] [Output] : ★ Jonathan Rodriguez proceeds to set the settings to the Dynojet settings, as his laptop proceeds to boot up.
- [2018-01-07 07:40:40] [Output] : ★ Jonathan Rodriguez opens the disk tray, as he inserts the disk for the ECUTEK software, as he then-..
- [2018-01-07 07:40:52] [Output] : ★ -..quickly installs it, pressing next on every message showing up. ((Jonathan Rodriguez))
- [2018-01-07 07:41:05] [Output] : ★ Jonathan Rodriguez proceeds to head towards the undercarriage of the car, as he then straps it in using-..
- [2018-01-07 07:41:16] [Output] : ★ -..the straps for the dyno, aligning them to the frame rails, tightening them. ((Jonathan Rodriguez))
- [2018-01-07 07:41:26] [Output] : ★ Jonathan Rodriguez lifts himself up, as he grabs his laptop and a USB cable, heading inside the car.
- [2018-01-07 07:41:54] [Output] : ★ Jonathan Rodriguez proceeds to connect the cable to the ECU, before connecting it to the laptop.
- [2018-01-07 07:42:06] [Output] : ★ Jonathan Rodriguez proceeds to open up the tuning suite, as it would recognize the car as the key is turned.
- [2018-01-07 07:42:11] [Output] : ★ Jonathan Rodriguez proceeds to turn on the engine.
- [2018-01-07 07:42:34] [Output] : ★ Jonathan Rodriguez clicks onto the stock turbo option, as the ECUTEK software would slap a quick and dirty-..
- [2018-01-07 07:42:37] [Output] : ★ -..tune on it. ((Jonathan Rodriguez))
- [2018-01-07 07:42:55] [Output] : ★ Jonathan Rodriguez proceeds to then row through the gears, sticking it into third gear, as he progressively-..
- [2018-01-07 07:42:57] [Output] : ★ -..gets on the throttle. ((Jonathan Rodriguez))
- [2018-01-07 07:43:14] [Output] : ★ Jonathan Rodriguez lifts off, as the engine seems stable and the dyno shows 300HP @ 7PSI.
- [2018-01-07 07:43:33] [Output] : ★ Jonathan Rodriguez nods briefly, as he proceeds to turn on the "Flex Fuel" option, as he clicks on the pump-..
- [2018-01-07 07:43:35] [Output] : ★ -..option. ((Jonathan Rodriguez))
- [2018-01-07 07:44:10] [Output] : ★ Jonathan Rodriguez proceeds to retard the timing 3 degrees, as he adds another 3PSI of boost, totalling 10.
- [2018-01-07 07:44:21] [Output] : ★ Jonathan Rodriguez proceeds to do another dyno run, as the dyno shows 320HP.
- [2018-01-07 07:44:32] [Output] : ★ Jonathan Rodriguez proceeds to then start richening up the fuel mixture, going up to 12PSI.
- [2018-01-07 07:44:39] [Output] : ★ Jonathan Rodriguez proceeds to go into third again, doing another dyno run.
- [2018-01-07 07:44:47] [Output] : ★ The fuel light would be on. ((Jonathan Rodriguez))
- [2018-01-07 07:45:02] [Output] : ★ The dyno would shows 335HP @ 12PSI. ((Jonathan Rodriguez))
- [2018-01-07 07:45:12] [Output] : ★ Jonathan Rodriguez proceeds to shut off the engine, as he leaves the laptop on the passager side-..
- [2018-01-07 07:46:47] [Output] : ★ -..getting out of the car. ((Jonathan Rodriguez))
- [2018-01-07 07:46:58] [Output] : ★ Jonathan Rodriguez heads towards the workbench, grabbing a jug of E85, as he opens up the fuel door-..
- [2018-01-07 07:47:02] [Output] : ★ -..pouring the insides in. ((Jonathan Rodriguez))
- [2018-01-07 07:47:10] [Output] : ★ Jonathan Rodriguez closes the fuel door as he proceeds to hop back into the car, turning the key.
- [2018-01-07 07:47:23] [Output] : ★ Jonathan Rodriguez grabs his laptop from the passager side, as he proceeds to then click on the E85 option-..
- [2018-01-07 07:47:39] [Output] : ★ -..as he richens up the fuel mixture quite a lot, instantly slapping 18PSI and -.. ((Jonathan Rodriguez))
- [2018-01-07 07:47:42] [Output] : ★ -..retarding the timing. ((Jonathan Rodriguez))
- [2018-01-07 07:49:29] [Output] : ★ Jonathan Rodriguez proceeds to stick it in third, as he does another dyno run, as at low RPM's the clutch-..
- [2018-01-07 07:49:32] [Output] : ★ -..would start slipping. ((Jonathan Rodriguez))
- [2018-01-07 07:49:43] [Output] : ★ Jonathan Rodriguez proceeds to lift off, as he shakes his head lightly.
- [2018-01-07 07:49:59] [Output] : ★ Jonathan Rodriguez proceeds to go into the fuel and boost delivery, as he then lowers the boost in lower-..
- [2018-01-07 07:50:12] [Output] : ★ -..RPM areas and leans the mixture, attempting to lower the peak torque number. ((Jonathan Rodriguez))
- [2018-01-07 07:53:07] [Output] : ★ Jonathan Rodriguez proceeds to advance the timing 5 degrees, as he then starts another dyno run.
- [2018-01-07 07:53:25] [Output] : ★ The dyno would show 398.5HP @ 6800RPM. ((Jonathan Rodriguez))
- [2018-01-07 07:53:33] [Output] : ★ Jonathan Rodriguez proceeds to save the tune for E85.
- [2018-01-07 07:53:46] [Output] : ★ Jonathan Rodriguez proceeds to then create another tune from the dropdown menu, labeling it "DAILY".
- [2018-01-07 07:54:04] [Output] : ★ Jonathan Rodriguez proceeds to align them in the list, as to use the feature of changing tunes on the fly-.
- [2018-01-07 07:54:11] [Output] : ★ -..offered by the ECUTEK suite. ((Jonathan Rodriguez))
- [2018-01-07 07:54:24] [Output] : ★ Jonathan Rodriguez proceeds to put 5PSI, a lean mixture and retarded timing, as he does a dyno run.
- [2018-01-07 07:54:34] [Output] : ★ This tune would show a total of 250HP. ((Jonathan Rodriguez))
- [2018-01-07 07:54:43] [Output] : ★ Jonathan Rodriguez proceeds to put it back on the E85 tune, as he does another run.
- [2018-01-07 07:54:59] [Output] : ★ It'd show 399.2HP this time, close to the 400HP target Jonathan set. ((Jonathan Rodriguez))
- [2018-01-07 07:55:11] [Output] : ★ Jonathan Rodriguez proceeds to lift off the throttle, saving all the tunes, as he disconnects his laptop.
- [2018-01-07 07:55:22] [Output] : ★ Jonathan Rodriguez grabs the panel for the ECU, as he proceeds to screw it in.
- [2018-01-07 07:55:30] [Output] : ★ Jonathan Rodriguez gets out of the car, heading towards the back of it, as he quickly unstraps it.
Advertisement
Add Comment
Please, Sign In to add comment