API tools faq
paste
xlazom00

Untitled

xlazom00
Feb 16th, 2023
294
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.62 KB | None | 0 0
raw download clone embed print report
  1. ▒DDR V1.09 a930779e06 typ 22/11/21-17:50:56
  2. LPDDR4X, 2112MHz
  3. channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  4. channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  5. channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  6. channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  7. Manufacturer ID:0xff
  8. CH0 RX Vref:29.7%, TX Vref:20.8%,0.0%
  9. CH1 RX Vref:30.7%, TX Vref:21.8%,0.0%
  10. CH2 RX Vref:28.7%, TX Vref:20.8%,0.0%
  11. CH3 RX Vref:29.7%, TX Vref:20.8%,0.0%
  12. change to F1: 528MHz
  13. change to F2: 1068MHz
  14. change to F3: 1560MHz
  15. change to F0: 2112MHz
  16. out
  17. U-Boot SPL board init
  18. U-Boot SPL 2017.09-armbian (Feb 09 2023 - 22:59:10)
  19. Trying to boot from MMC2
  20. spl: partition error
  21. Trying fit image at 0x4000 sector
  22. ## Verified-boot: 0
  23. ## Checking atf-1 0x00040000 ... sha256(909ea14106...) + OK
  24. ## Checking uboot 0x00200000 ... sha256(a99a37148b...) + OK
  25. ## Checking fdt 0x0031a8a8 ... sha256(1245389642...) + OK
  26. ## Checking atf-2 0x000f0000 ... sha256(6a970ae6b4...) + OK
  27. ## Checking atf-3 0xff100000 ... sha256(3ea8cf0d7e...) + OK
  28. Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
  29. Total: 600.817 ms
  30.  
  31. INFO: Preloader serial: 2
  32. NOTICE: BL31: v2.3():v2.3-468-ge529a2760:derrick.huang
  33. NOTICE: BL31: Built : 09:59:49, Nov 21 2022
  34. INFO: spec: 0x1
  35. INFO: ext 32k is not valid
  36. INFO: ddr: stride-en 4CH
  37. INFO: GICv3 without legacy support detected.
  38. INFO: ARM GICv3 driver initialized in EL3
  39. INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
  40. INFO: system boots from cpu-hwid-0
  41. INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
  42. INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
  43. INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
  44. INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
  45. INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
  46. INFO: BL31: Initialising Exception Handling Framework
  47. INFO: BL31: Initializing runtime services
  48. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  49. ERROR: Error initializing runtime service opteed_fast
  50. INFO: BL31: Preparing for EL3 exit to normal world
  51. INFO: Entry point address = 0x200000
  52. INFO: SPSR = 0x3c9
  53.  
  54.  
  55. U-Boot 2017.09-armbian (Feb 09 2023 - 22:59:10 +0100)
  56.  
  57. Model: Radxa ROCK 5B
  58. PreSerial: 2, raw, 0xfeb50000
  59. DRAM: 4 GiB
  60. Sysmem: init
  61. Relocation Offset: eda43000
  62. Relocation fdt: eb9f9578 - eb9fecd0
  63. CR: M/C/I
  64. Using default environment
  65.  
  66. no mmc device at slot 1
  67. mmc@fe2c0000: 1 (SD), mmc@fe2e0000: 0
  68. Bootdev(atags): mmc 1
  69. MMC1: Legacy, 52Mhz
  70. PartType: EFI
  71. DM: v2
  72. No misc partition
  73. boot mode: None
  74. FIT: No boot partition
  75. No resource partition
  76. No resource partition
  77. Failed to load DTB, ret=-19
  78. No find valid DTB, ret=-22
  79. Failed to get kernel dtb, ret=-22
  80. Model: Radxa ROCK 5B
  81. rockchip_set_serialno: could not find efuse/otp device
  82. CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  83. b0pll 24000 KHz
  84. b1pll 24000 KHz
  85. lpll 24000 KHz
  86. v0pll 24000 KHz
  87. aupll 24000 KHz
  88. cpll 1500000 KHz
  89. gpll 1188000 KHz
  90. npll 24000 KHz
  91. ppll 1100000 KHz
  92. aclk_center_root 702000 KHz
  93. pclk_center_root 100000 KHz
  94. hclk_center_root 396000 KHz
  95. aclk_center_low_root 500000 KHz
  96. aclk_top_root 750000 KHz
  97. pclk_top_root 100000 KHz
  98. aclk_low_top_root 396000 KHz
  99. No misc partition
  100. Net: No ethernet found.
  101. Hit key to stop autoboot('CTRL+C'): 0
  102. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  103. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  104. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  105. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  106. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  107. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  108. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  109. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  110. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  111. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  112. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  113. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  114. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  115. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  116. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  117. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  118. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  119. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  120. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  121. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  122. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  123. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  124. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  125. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  126. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  127. pcie@fe150000: PCIe Linking... LTSSM is 0x1
  128. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  129. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  130. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  131. pcie@fe150000: PCIe Linking... LTSSM is 0x1
  132. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  133. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  134. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  135. pcie@fe150000: PCIe Linking... LTSSM is 0x1
  136. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  137. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  138. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  139. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  140. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  141. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  142. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  143. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  144. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  145. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  146. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  147. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  148. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  149. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  150. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  151. pcie@fe150000: PCIe Linking... LTSSM is 0x0
  152. pcie@fe150000: PCIe-0 Link Fail
  153.  
  154. Device 0: unknown device
  155. switch to partitions #0, OK
  156. mmc1 is current device
  157. Scanning mmc 1:1...
  158. Found U-Boot script /boot.scr
  159. 3252 bytes read in 11 ms (288.1 KiB/s)
  160. ## Executing script at 00500000
  161. Boot script loaded from mmc 1
  162. 160 bytes read in 9 ms (16.6 KiB/s)
  163. 27310683 bytes read in 2228 ms (11.7 MiB/s)
  164. 33387008 bytes read in 2706 ms (11.8 MiB/s)
  165. 99530 bytes read in 79 ms (1.2 MiB/s)
  166. ** File not found /dtb/rockchip/overlay/rockchip-rk3588-fixup.scr **
  167. Unknown command 'kaslrseed' - try 'help'
  168. Fdt Ramdisk skip relocation
  169. No misc partition
  170. ## Loading init Ramdisk from Legacy Image at 0a200000 ...
  171. Image Name: uInitrd
  172. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  173. Data Size: 27310619 Bytes = 26 MiB
  174. Load Address: 00000000
  175. Entry Point: 00000000
  176. Verifying Checksum ... OK
  177. ## Flattened Device Tree blob at 0x08300000
  178. Booting using the fdt blob at 0x08300000
  179. reserving fdt memory region: addr=8300000 size=7e000
  180. 'reserved-memory' ramoops@110000: addr=110000 size=f0000
  181. Using Device Tree in place at 0000000008300000, end 0000000008380fff
  182. can't get otp device, ret=-19
  183. can't found rockchip,drm-logo, use rockchip,fb-logo
  184. WARNING: could not set reg FDT_ERR_BADOFFSET.
  185. failed to reserve fb-loader-logo memory
  186. Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
  187. Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
  188. Total: 6299.483 ms
  189.  
  190. Starting kernel ...
  191.  
  192. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  193. [ 0.000000] Linux version 6.2.0-rc1-rockchip-rk3588 (root@misko-virtual-machine) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP PREEMPT Thu Feb 9 23:14:20 CET 2023
  194. [ 0.000000] Machine model: Radxa ROCK 5 Model B
  195. [ 0.000000] efi: UEFI not found.
  196. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e0000000, size 256 MiB
  197. [ 0.000000] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
  198. [ 0.000000] NUMA: No NUMA configuration found
  199. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000001ffffffff]
  200. [ 0.000000] NUMA: NODE_DATA [mem 0x1ff761480-0x1ff763fff]
  201. [ 0.000000] Zone ranges:
  202. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
  203. [ 0.000000] DMA32 empty
  204. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  205. [ 0.000000] Movable zone start for each node
  206. [ 0.000000] Early memory node ranges
  207. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
  208. [ 0.000000] node 0: [mem 0x00000001f0000000-0x00000001ffffffff]
  209. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
  210. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  211. [ 0.000000] psci: probing for conduit method from DT.
  212. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  213. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  214. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  215. [ 0.000000] psci: SMC Calling Convention v1.2
  216. [ 0.000000] percpu: Embedded 30 pages/cpu s84200 r8192 d30488 u122880
  217. [ 0.000000] pcpu-alloc: s84200 r8192 d30488 u122880 alloc=30*4096
  218. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  219. [ 0.000000] Detected VIPT I-cache on CPU0
  220. [ 0.000000] CPU features: detected: GIC system register CPU interface
  221. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  222. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  223. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  224. [ 0.000000] alternatives: applying boot alternatives
  225. [ 0.000000] Fallback order for Node 0: 0
  226. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031688
  227. [ 0.000000] Policy zone: Normal
  228. [ 0.000000] Kernel command line: root=UUID=9b7fe351-4f5a-4e3a-ab5e-49de185e8066 rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=9 ubootpart=89c2b117-cab7-a048-92e7-1e1ec0ed93b7 usb-storage.quirks= cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  229. [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to [email protected] if you depend on this functionality.
  230. [ 0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=89c2b117-cab7-a048-92e7-1e1ec0ed93b7 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  231. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  232. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  233. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  234. [ 0.000000] software IO TLB: area num 8.
  235. [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
  236. [ 0.000000] Memory: 3722156K/4192256K available (17856K kernel code, 2844K rwdata, 7108K rodata, 4672K init, 744K bss, 207956K reserved, 262144K cma-reserved)
  237. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  238. [ 0.000000] trace event string verifier disabled
  239. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  240. [ 0.000000] rcu: RCU event tracing is enabled.
  241. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
  242. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  243. [ 0.000000] Tracing variant of Tasks RCU enabled.
  244. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  245. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  246. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  247. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  248. [ 0.000000] GICv3: 480 SPIs implemented
  249. [ 0.000000] GICv3: 0 Extended SPIs implemented
  250. [ 0.000000] GICv3: MBI range [424:479]
  251. [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000
  252. [ 0.000000] Root IRQ handler: gic_handle_irq
  253. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  254. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  255. [ 0.000000] /interrupt-controller@fe600000/msi-controller@fe640000: no regs?
  256. [ 0.000000] /interrupt-controller@fe600000/msi-controller@fe660000: no regs?
  257. [ 0.000000] ITS: No ITS available, not enabling LPIs
  258. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
  259. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
  260. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  261. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  262. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  263. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  264. [ 0.000702] Console: colour dummy device 80x25
  265. [ 0.000711] printk: console [tty1] enabled
  266. [ 0.001378] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  267. [ 0.001403] pid_max: default: 32768 minimum: 301
  268. [ 0.001570] LSM: initializing lsm=lockdown,capability,yama,integrity,apparmor
  269. [ 0.001640] Yama: becoming mindful.
  270. [ 0.001752] AppArmor: AppArmor initialized
  271. [ 0.001878] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  272. [ 0.001905] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  273. [ 0.004194] cblist_init_generic: Setting adjustable number of callback queues.
  274. [ 0.004221] cblist_init_generic: Setting shift to 3 and lim to 1.
  275. [ 0.004322] cblist_init_generic: Setting shift to 3 and lim to 1.
  276. [ 0.004544] rcu: Hierarchical SRCU implementation.
  277. [ 0.004558] rcu: Max phase no-delay instances is 1000.
  278. [ 0.005782] msi-controller@fe640000: unable to locate ITS domain
  279. [ 0.005803] msi-controller@fe660000: unable to locate ITS domain
  280. [ 0.005994] msi-controller@fe640000: Unable to locate ITS domain
  281. [ 0.006011] msi-controller@fe660000: Unable to locate ITS domain
  282. [ 0.007746] EFI services will not be available.
  283. [ 0.008295] smp: Bringing up secondary CPUs ...
  284. [ 0.008918] Detected VIPT I-cache on CPU1
  285. [ 0.009006] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  286. [ 0.009038] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  287. [ 0.009739] Detected VIPT I-cache on CPU2
  288. [ 0.009820] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  289. [ 0.009845] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  290. [ 0.010474] Detected VIPT I-cache on CPU3
  291. [ 0.010554] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  292. [ 0.010578] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  293. [ 0.011226] CPU features: detected: Spectre-v4
  294. [ 0.011230] CPU features: detected: Spectre-BHB
  295. [ 0.011234] Detected PIPT I-cache on CPU4
  296. [ 0.011279] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  297. [ 0.011291] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  298. [ 0.011887] Detected PIPT I-cache on CPU5
  299. [ 0.011937] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  300. [ 0.011950] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  301. [ 0.012549] Detected PIPT I-cache on CPU6
  302. [ 0.012598] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  303. [ 0.012610] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  304. [ 0.013210] Detected PIPT I-cache on CPU7
  305. [ 0.013260] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
  306. [ 0.013271] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
  307. [ 0.013333] smp: Brought up 1 node, 8 CPUs
  308. [ 0.013512] SMP: Total of 8 processors activated.
  309. [ 0.013523] CPU features: detected: 32-bit EL0 Support
  310. [ 0.013534] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  311. [ 0.013549] CPU features: detected: Common not Private translations
  312. [ 0.013561] CPU features: detected: CRC32 instructions
  313. [ 0.013573] CPU features: detected: RCpc load-acquire (LDAPR)
  314. [ 0.013584] CPU features: detected: LSE atomic instructions
  315. [ 0.013595] CPU features: detected: Privileged Access Never
  316. [ 0.013606] CPU features: detected: RAS Extension Support
  317. [ 0.013618] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  318. [ 0.013699] CPU: All CPU(s) started at EL2
  319. [ 0.013711] alternatives: applying system-wide alternatives
  320. [ 0.018310] devtmpfs: initialized
  321. [ 0.025327] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  322. [ 0.025349] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  323. [ 0.026907] pinctrl core: initialized pinctrl subsystem
  324. [ 0.027121] DMI not present or invalid.
  325. [ 0.027414] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  326. [ 0.028171] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  327. [ 0.028353] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  328. [ 0.028492] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  329. [ 0.028518] audit: initializing netlink subsys (disabled)
  330. [ 0.028632] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
  331. [ 0.029381] thermal_sys: Registered thermal governor 'fair_share'
  332. [ 0.029384] thermal_sys: Registered thermal governor 'bang_bang'
  333. [ 0.029389] thermal_sys: Registered thermal governor 'step_wise'
  334. [ 0.029393] thermal_sys: Registered thermal governor 'user_space'
  335. [ 0.029397] thermal_sys: Registered thermal governor 'power_allocator'
  336. [ 0.029416] cpuidle: using governor ladder
  337. [ 0.029430] cpuidle: using governor menu
  338. [ 0.029588] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  339. [ 0.029698] ASID allocator initialised with 65536 entries
  340. [ 0.030271] Serial: AMBA PL011 UART driver
  341. [ 0.051815] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  342. [ 0.051987] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
  343. [ 0.052094] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  344. [ 0.052196] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
  345. [ 0.052306] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  346. [ 0.052409] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
  347. [ 0.052547] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  348. [ 0.052645] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
  349. [ 0.052769] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  350. [ 0.052884] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
  351. [ 0.058941] platform fde50000.dp: Fixing up cyclic dependency with fdd90000.vop
  352. [ 0.059255] platform fde80000.hdmi: Fixing up cyclic dependency with fdd90000.vop
  353. [ 0.061187] platform fdea0000.hdmi: Fixing up cyclic dependency with fdd90000.vop
  354. [ 0.063627] KASLR disabled due to lack of seed
  355. [ 0.064052] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  356. [ 0.064059] HugeTLB: 16380 KiB vmemmap can be fArmor: AppArmor Filesystem Enabled
  357. [ 0.744899] pnp: PnP ACPI: disabled
  358. [ 0.749377] NET: Registered PF_INET protocol family
  359. [ 0.749473] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  360. [ 0.750948] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  361. [ 0.750992] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  362. [ 0.751039] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  363. [ 0.751259] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  364. [ 0.751852] TCP: Hash tables configured (established 32768 bind 32768)
  365. [ 0.751916] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  366. [ 0.751983] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  367. [ 0.752123] NET: Registered PF_UNIX/PF_LOCAL protocol family
  368. [ 0.752143] NET: Registered PF_XDP protocol family
  369. [ 0.752150] PCI: CLS 0 bytes, default 64
  370. [ 0.752340] Trying to unpack rootfs image as initramfs...
  371. [ 0.761105] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  372. [ 0.761360] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
  373. [ 0.761827] kvm [1]: IPA Size Limit: 40 bits
  374. [ 0.761841] kvm [1]: GICv3: no GICV resource entry
  375. [ 0.761845] kvm [1]: disabling GICv2 emulation
  376. [ 0.761858] kvm [1]: GIC system register CPU interface enabled
  377. [ 0.761972] kvm [1]: vgic interrupt IRQ18
  378. [ 0.762100] kvm [1]: VHE mode initialized successfully
  379. [ 0.762988] Initialise system trusted keyrings
  380. [ 0.763011] Key type blacklist registered
  381. [ 0.763150] workingset: timestamp_bits=42 max_order=20 bucket_order=0
  382. [ 0.763188] zbud: loaded
  383. [ 0.763484] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  384. [ 0.763695] fuse: init (API version 7.38)
  385. [ 0.764530] integrity: Platform Keyring initialized
  386. [ 0.783394] xor: measuring software checksum speed
  387. [ 0.784540] 8regs : 8642 MB/sec
  388. [ 0.785704] 32regs : 8491 MB/sec
  389. [ 0.786660] arm64_neon : 10345 MB/sec
  390. [ 0.786664] xor: using function: arm64_neon (10345 MB/sec)
  391. [ 0.786671] Key type asymmetric registered
  392. [ 0.786675] Asymmetric key parser 'x509' registered
  393. [ 0.786711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  394. [ 0.786820] io scheduler mq-deadline registered
  395. [ 0.786826] io scheduler kyber registered
  396. [ 0.786849] io scheduler bfq registered
  397. [ 0.792974] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
  398. [ 0.793183] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
  399. [ 0.795610] EINJ: ACPI disabled.
  400. [ 0.800609] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
  401. [ 0.800617] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  402. [ 0.801168] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
  403. [ 0.801175] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  404. [ 0.801712] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
  405. [ 0.801719] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  406. [ 0.805049] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
  407. [ 0.806140] printk: console [ttyS2] disabled
  408. [ 0.806164] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 42, base_baud = 1500000) is a 16550A
  409. [ 0.806236] printk: console [ttyS2] enabled
  410. [ 0.944656] Serial: AMBA driver
  411. [ 0.952044] brd: module loaded
  412. [ 0.955025] loop: module loaded
  413. [ 0.958238] rk8xx-spi spi2.0: chip id: 0x8060
  414. [ 0.960443] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
  415. [ 0.961041] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
  416. [ 0.965094] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV
  417. [ 0.966281] vcc_3v3_s3: Bringing 3275000uV into 3300000-3300000uV
  418. [ 0.967720] vcc_1v8_s3: Bringing 1775000uV into 1800000-1800000uV
  419. [ 0.969581] avdd_0v75_s0: Bringing 750000uV into 837500-837500uV
  420. [ 0.974973] thunder_xcv, ver 1.0
  421. [ 0.975269] thunder_bgx, ver 1.0
  422. [ 0.975558] nicpf, ver 1.0
  423. [ 0.976156] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  424. [ 0.976796] hns3: Copyright (c) 2017 Huawei Corporation.
  425. [ 0.977277] hclge is initializing
  426. [ 0.978411] VFIO - User Level meta-driver version: 0.3
  427. [ 0.986857] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  428. [ 0.987346] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  429. [ 0.988070] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  430. [ 0.988916] xhci-hcd xhci-hcd.3.auto: irq 61, io mem 0xfcd00000
  431. [ 0.989497] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  432. [ 0.989880] ehci-platform fc800000.usb: EHCI Host Controller
  433. [ 0.989896] ohci-platform fc840000.usb: Generic Platform OHCI controller
  434. [ 0.989912] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 2
  435. [ 0.989977] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3
  436. [ 0.989983] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 4
  437. [ 0.990027] ohci-platform fc840000.usb: irq 65, io mem 0xfc840000
  438. [ 0.990475] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  439. [ 0.990529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
  440. [ 0.991104] ehci-platform fc800000.usb: irq 63, io mem 0xfc800000
  441. [ 0.991459] ehci-platform fc880000.usb: EHCI Host Controller
  442. [ 0.991473] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
  443. [ 0.991738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  444. [ 0.997137] usb usb1: Product: xHCI Host Controller
  445. [ 0.997563] usb usb1: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 xhci-hcd
  446. [ 0.998176] usb usb1: SerialNumber: xhci-hcd.3.auto
  447. [ 0.998840] hub 1-0:1.0: USB hub found
  448. [ 0.999177] hub 1-0:1.0: 1 port detected
  449. [ 0.999623] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  450. [ 1.000355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
  451. [ 1.001083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  452. [ 1.001713] usb usb3: Product: xHCI Host Controller
  453. [ 1.002139] usb usb3: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 xhci-hcd
  454. [ 1.002753] usb usb3: SerialNumber: xhci-hcd.3.auto
  455. [ 1.003349] hub 3-0:1.0: USB hub found
  456. [ 1.003684] hub 3-0:1.0: 1 port detected
  457. [ 1.004121] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 5
  458. [ 1.004132] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 6
  459. [ 1.004181] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  460. [ 1.004248] ehci-platform fc880000.usb: irq 64, io mem 0xfc880000
  461. [ 1.004387] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
  462. [ 1.004569] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
  463. [ 1.004579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  464. [ 1.004585] usb usb4: Product: EHCI Host Controller
  465. [ 1.004590] usb usb4: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 ehci_hcd
  466. [ 1.004595] usb usb4: SerialNumber: fc800000.usb
  467. [ 1.004951] hub 4-0:1.0: USB hub found
  468. [ 1.004996] ohci-platform fc8c0000.usb: irq 66, io mem 0xfc8c0000
  469. [ 1.010722] hub 4-0:1.0: 1 port detected
  470. [ 1.011174] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 7
  471. [ 1.011917] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  472. [ 1.012758] xhci-hcd xhci-hcd.4.auto: irq 62, io mem 0xfc400000
  473. [ 1.013342] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  474. [ 1.013823] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 8
  475. [ 1.014491] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
  476. [ 1.015097] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
  477. [ 1.015818] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  478. [ 1.016452] usb usb7: Product: xHCI Host Controller
  479. [ 1.016877] usb usb7: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 xhci-hcd
  480. [ 1.017491] usb usb7: SerialNumber: xhci-hcd.4.auto
  481. [ 1.018084] hub 7-0:1.0: USB hub found
  482. [ 1.018424] hub 7-0:1.0: 1 port detected
  483. [ 1.018864] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  484. [ 1.019600] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
  485. [ 1.020320] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 1.020396] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
  487. [ 1.020958] usb usb8: Product: xHCI Host Controller
  488. [ 1.021923] usb usb8: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 xhci-hcd
  489. [ 1.022538] usb usb8: SerialNumber: xhci-hcd.4.auto
  490. [ 1.023131] hub 8-0:1.0: USB hub found
  491. [ 1.023467] hub 8-0:1.0: 1 port detected
  492. [ 1.023927] usbcore: registered new interface driver usb-storage
  493. [ 1.024024] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
  494. [ 1.025204] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  495. [ 1.025454] mousedev: PS/2 mouse device common for all mice
  496. [ 1.025848] usb usb5: Product: EHCI Host Controller
  497. [ 1.026769] usb usb5: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 ehci_hcd
  498. [ 1.027237] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
  499. [ 1.027393] usb usb5: SerialNumber: fc880000.usb
  500. [ 1.027786] hub 5-0:1.0: USB hub found
  501. [ 1.028622] i2c_dev: i2c /dev entries driver
  502. [ 1.028796] hub 5-0:1.0: 1 port detected
  503. [ 1.042271] i2c 4-0022: Fixing up cyclic dependency with fc000000.usb
  504. [ 1.044248] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
  505. [ 1.045820] ghes_edac: GHES probing device list is empty
  506. [ 1.046442] sdhci: Secure Digital Host Controller Interface driver
  507. [ 1.047443] sdhci: Copyright(c) Pierre Ossman
  508. [ 1.048076] Synopsys Designware Multimedia Card Interface Driver
  509. [ 1.049162] sdhci-pltfm: SDHCI platform and OF driver helper
  510. [ 1.049626] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  511. [ 1.050296] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  512. [ 1.050889] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  513. [ 1.051419] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 70,32 bit host data width,256 deep fifo
  514. [ 1.052537] ledtrig-cpu: registered to indicate activity on CPUs
  515. [ 1.052576] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
  516. [ 1.053252] No iBFT detected.
  517. [ 1.053797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  518. [ 1.054154] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  519. [ 1.054695] usb usb2: Product: Generic Platform OHCI controller
  520. [ 1.055293] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
  521. [ 1.055801] usb usb2: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 ohci_hcd
  522. [ 1.056553] hid: raw HID events driver (C) Jiri Kosina
  523. [ 1.057129] usb usb2: SerialNumber: fc840000.usb
  524. [ 1.057600] usbcore: registered new interface driver usbhid
  525. [ 1.058418] hub 2-0:1.0: USB hub found
  526. [ 1.058472] usbhid: USB HID core driver
  527. [ 1.059177] hub 2-0:1.0: 1 port detected
  528. [ 1.059848] optee: probing for conduit method.
  529. [ 1.060239] optee: api uid mismatch
  530. [ 1.060552] optee: probe of firmware:optee failed with error -22
  531. [ 1.061700] NET: Registered PF_INET6 protocol family
  532. [ 1.064478] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  533. [ 1.068657] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02
  534. [ 1.069399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  535. [ 1.070044] usb usb6: Product: Generic Platform OHCI controller
  536. [ 1.070572] usb usb6: Manufacturer: Linux 6.2.0-rc1-rockchip-rk3588 ohci_hcd
  537. [ 1.071199] usb usb6: SerialNumber: fc8c0000.usb
  538. [ 1.072084] hub 6-0:1.0: USB hub found
  539. [ 1.072468] hub 6-0:1.0: 1 port detected
  540. [ 1.080483] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
  541. [ 1.153229] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
  542. [ 1.264429] usb 4-1: new high-speed USB device number 2 using ehci-platform
  543. [ 1.333381] Freeing initrd memory: 26664K
  544. [ 1.358407] Segment Routing with IPv6
  545. [ 1.358759] In-situ OAM (IOAM) with IPv6
  546. [ 1.359151] NET: Registered PF_PACKET protocol family
  547. [ 1.359783] 8021q: 802.1Q VLAN Support v1.8
  548. [ 1.360186] Key type dns_resolver registered
  549. [ 1.364537] registered taskstats version 1
  550. [ 1.364979] Loading compiled-in X.509 certificates
  551. [ 1.366640] Loaded X.509 cert 'Build time autogenerated kernel key: 5fe6e71c9b2a0e607831e6579598de728ae35cce'
  552. [ 1.370431] zswap: loaded using pool zstd/z3fold
  553. [ 1.370777] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 246
  554. [ 1.371820] mmc1: new ultra high speed SDR104 SDXC card at address aaaa
  555. [ 1.373302] mmcblk1: mmc1:aaaa SR64G 59.5 GiB
  556. [ 1.373942] Key type .fscrypt registered
  557. [ 1.374288] Key type fscrypt-provisioning registered
  558. [ 1.375445] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  559. [ 1.376092] Key type encrypted registered
  560. [ 1.376453] AppArmor: AppArmor sha1 policy hashing enabled
  561. [ 1.376941] ima: No TPM chip found, activating TPM-bypass!
  562. [ 1.377429] ima: Allocated hash algorithm: sha1
  563. [ 1.377835] ima: No architecture policies found
  564. [ 1.378248] evm: Initialising EVM extended attributes:
  565. [ 1.378696] evm: security.selinux
  566. [ 1.378987] evm: security.SMACK64
  567. [ 1.379277] evm: security.SMACK64EXEC
  568. [ 1.379597] evm: security.SMACK64TRANSMUTE
  569. [ 1.379771] mmcblk1: p1 p2
  570. [ 1.379953] evm: security.SMACK64MMAP
  571. [ 1.379954] evm: security.apparmor
  572. [ 1.379955] evm: security.ima
  573. [ 1.379956] evm: security.capability
  574. [ 1.381396] evm: HMAC attrs: 0x1
  575. [ 1.402058] dw-pcie a41000000.pcie: host bridge /pcie@fe190000 ranges:
  576. [ 1.402688] dw-pcie a41000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
  577. [ 1.403427] dw-pcie a41000000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
  578. [ 1.404148] dw-pcie a41000000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
  579. [ 1.425585] usb 4-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  580. [ 1.426321] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  581. [ 1.426956] usb 4-1: Product: USB 2.0 Hub
  582. [ 1.427877] hub 4-1:1.0: USB hub found
  583. [ 1.428420] hub 4-1:1.0: 4 ports detected
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!