Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-37-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD10JPVX-00JC3T0
- Serial Number: WD-WX31AC46XN5E
- LU WWN Device Id: 5 0014ee 60560e714
- Firmware Version: 01.01A01
- User Capacity: 1.000.204.886.016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Oct 4 10:29:47 2021 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: Incomplete response, ATA output registers missing
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (18900) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 211) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3
- 3 Spin_Up_Time POS--K 175 171 021 - 2225
- 4 Start_Stop_Count -O--CK 099 099 000 - 1095
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
- 9 Power_On_Hours -O--CK 097 097 000 - 2353
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 099 099 000 - 1035
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 94
- 193 Load_Cycle_Count -O--CK 184 184 000 - 50431
- 194 Temperature_Celsius -O---K 115 102 000 - 32
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 5
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 38 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 22
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 22 [21] occurred at disk power-on lifetime: 2345 hours (97 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 02 f1 00 40 00 Error: UNC at LBA = 0x0102f100 = 16969984
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 00 00 00 01 02 f1 00 40 80 00:30:02.548 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 f0 00 40 80 00:30:02.547 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 ef 00 40 80 00:30:02.537 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 ee 00 40 80 00:30:02.533 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 ed 00 40 80 00:30:02.530 READ FPDMA QUEUED
- Error 21 [20] occurred at disk power-on lifetime: 2345 hours (97 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 fe 8c 70 40 00 Error: UNC at LBA = 0x00fe8c70 = 16682096
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 08 00 00 00 fe 8b 88 40 80 00:28:30.122 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 00 fe 8a 88 40 80 00:28:30.120 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 1a 38 40 80 00:28:30.111 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 19 38 40 80 00:28:30.107 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 18 38 40 80 00:28:30.104 READ FPDMA QUEUED
- Error 20 [19] occurred at disk power-on lifetime: 2345 hours (97 days + 17 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 02 56 00 40 00 Error: UNC at LBA = 0x01025600 = 16930304
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 08 00 00 01 02 57 00 40 80 00:28:20.795 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 56 00 40 80 00:28:20.789 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 55 00 40 80 00:28:20.784 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 54 00 40 80 00:28:20.777 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 02 53 00 40 80 00:28:20.775 READ FPDMA QUEUED
- Error 19 [18] occurred at disk power-on lifetime: 2344 hours (97 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 66 b1 f0 40 00 Error: UNC at LBA = 0x0166b1f0 = 23507440
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 08 00 00 01 66 b2 f0 40 80 00:26:27.257 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 66 b1 f0 40 80 00:26:27.254 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 66 b0 f0 40 80 00:26:27.250 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 66 af f0 40 80 00:26:27.247 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 01 66 ae f0 40 80 00:26:27.243 READ FPDMA QUEUED
- Error 18 [17] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 40 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000840 = 2112
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:00:09.746 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:00:09.745 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:09.744 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 38 40 00 00:00:09.743 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:01.716 FLUSH CACHE EXT
- Error 17 [16] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 30 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000830 = 2096
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:00:09.745 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:09.744 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 38 40 00 00:00:09.743 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:01.716 FLUSH CACHE EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.716 READ DMA EXT
- Error 16 [15] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 00 00 00 00 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:09.744 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 38 40 00 00:00:09.743 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:01.716 FLUSH CACHE EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.716 READ DMA EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.715 READ DMA EXT
- Error 15 [14] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 38 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000838 = 2104
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 38 40 00 00:00:09.743 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:01.716 FLUSH CACHE EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.716 READ DMA EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.715 READ DMA EXT
- 25 00 00 00 08 00 00 00 03 09 90 40 00 00:00:01.710 READ DMA EXT
- Error 14 [13] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 00 00 00 00 00 08 50 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:01.716 FLUSH CACHE EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.716 READ DMA EXT
- 25 00 00 00 08 00 00 00 01 08 d8 40 00 00:00:01.715 READ DMA EXT
- 25 00 00 00 08 00 00 00 03 09 90 40 00 00:00:01.710 READ DMA EXT
- 35 00 00 00 08 00 00 00 00 08 50 40 00 00:00:01.710 WRITE DMA EXT
- Error 13 [12] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 03 09 a0 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x000309a0 = 199072
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 08 00 00 00 03 09 a0 40 00 00:01:37.376 READ DMA EXT
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.365 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 18 40 00 00:01:37.357 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.355 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.353 WRITE DMA EXT
- Error 12 [11] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 01 09 20 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00010920 = 67872
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.365 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 18 40 00 00:01:37.357 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.355 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:37.353 WRITE DMA EXT
- Error 11 [10] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 18 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000818 = 2072
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 18 40 00 00:01:37.357 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.355 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.352 WRITE DMA EXT
- Error 10 [9] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 00 00 00 00 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.355 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.352 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 79 40 00 00:01:37.351 WRITE DMA EXT
- Error 9 [8] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 48 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000848 = 2120
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.352 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 79 40 00 00:01:37.351 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:01:37.350 WRITE DMA EXT
- Error 8 [7] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 40 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000840 = 2112
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:37.353 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.352 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 79 40 00 00:01:37.351 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:01:37.350 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.350 FLUSH CACHE EXT
- Error 7 [6] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 01 09 20 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00010920 = 67872
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 01 09 20 40 00 00:01:37.352 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 79 40 00 00:01:37.351 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:01:37.350 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.350 FLUSH CACHE EXT
- 25 00 00 00 40 00 00 00 09 b2 a0 40 00 00:01:37.349 READ DMA EXT
- Error 6 [5] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 3d 00 00 00 00 19 79 40 00 Device Fault; Error: ABRT 61 sectors at LBA = 0x00001979 = 6521
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 3d 00 00 00 00 19 79 40 00 00:01:37.351 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:01:37.350 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.350 FLUSH CACHE EXT
- 25 00 00 00 40 00 00 00 09 b2 a0 40 00 00:01:37.349 READ DMA EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.349 WRITE DMA EXT
- Error 5 [4] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 30 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000830 = 2096
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 30 40 00 00:01:37.350 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.350 FLUSH CACHE EXT
- 25 00 00 00 40 00 00 00 09 b2 a0 40 00 00:01:37.349 READ DMA EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.349 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:06.819 FLUSH CACHE EXT
- Error 4 [3] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 00 00 00 00 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:37.350 FLUSH CACHE EXT
- 25 00 00 00 40 00 00 00 09 b2 a0 40 00 00:01:37.349 READ DMA EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.349 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:06.819 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:06.818 WRITE DMA EXT
- Error 3 [2] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 40 00 00 00 09 b2 a0 40 00 Device Fault; Error: ABRT 64 sectors at LBA = 0x0009b2a0 = 635552
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 40 00 00 00 09 b2 a0 40 00 00:01:37.349 READ DMA EXT
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.349 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:06.819 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:06.818 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 18 b0 40 00 00:01:06.818 WRITE DMA EXT
- Error 2 [1] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 08 00 00 00 00 08 48 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000848 = 2120
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 00 00 08 00 00 00 00 08 48 40 00 00:01:37.349 WRITE DMA EXT
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:06.819 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:06.818 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 18 b0 40 00 00:01:06.818 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 3c 40 00 00:01:06.816 WRITE DMA EXT
- Error 1 [0] occurred at disk power-on lifetime: 2339 hours (97 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 61 00 00 00 00 00 00 18 b0 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:01:06.819 FLUSH CACHE EXT
- 35 00 00 00 08 00 00 00 00 08 40 40 00 00:01:06.818 WRITE DMA EXT
- 35 00 00 00 08 00 00 00 00 18 b0 40 00 00:01:06.818 WRITE DMA EXT
- 35 00 00 00 3d 00 00 00 00 19 3c 40 00 00:01:06.816 WRITE DMA EXT
- 25 00 00 00 3d 00 00 13 a6 9b 70 40 00 00:00:57.989 READ DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Interrupted (host reset) 90% 2184 -
- # 2 Short offline Completed without error 00% 320 -
- # 3 Short offline Completed without error 00% 75 -
- # 4 Short offline Aborted by host 20% 74 -
- # 5 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 32 Celsius
- Power Cycle Min/Max Temperature: 32/32 Celsius
- Lifetime Min/Max Temperature: 16/46 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 128 (70)
- Index Estimated Time Temperature Celsius
- 71 2021-10-04 08:22 36 *****************
- 72 2021-10-04 08:23 35 ****************
- ... ..( 5 skipped). .. ****************
- 78 2021-10-04 08:29 35 ****************
- 79 2021-10-04 08:30 34 ***************
- ... ..( 7 skipped). .. ***************
- 87 2021-10-04 08:38 34 ***************
- 88 2021-10-04 08:39 33 **************
- ... ..( 3 skipped). .. **************
- 92 2021-10-04 08:43 33 **************
- 93 2021-10-04 08:44 32 *************
- ... ..( 8 skipped). .. *************
- 102 2021-10-04 08:53 32 *************
- 103 2021-10-04 08:54 31 ************
- ... ..( 16 skipped). .. ************
- 120 2021-10-04 09:11 31 ************
- 121 2021-10-04 09:12 ? -
- 122 2021-10-04 09:13 31 ************
- 123 2021-10-04 09:14 ? -
- 124 2021-10-04 09:15 31 ************
- 125 2021-10-04 09:16 31 ************
- 126 2021-10-04 09:17 ? -
- 127 2021-10-04 09:18 28 *********
- 0 2021-10-04 09:19 28 *********
- 1 2021-10-04 09:20 29 **********
- 2 2021-10-04 09:21 ? -
- 3 2021-10-04 09:22 29 **********
- 4 2021-10-04 09:23 29 **********
- 5 2021-10-04 09:24 30 ***********
- ... ..( 11 skipped). .. ***********
- 17 2021-10-04 09:36 30 ***********
- 18 2021-10-04 09:37 31 ************
- ... ..( 29 skipped). .. ************
- 48 2021-10-04 10:07 31 ************
- 49 2021-10-04 10:08 32 *************
- ... ..( 4 skipped). .. *************
- 54 2021-10-04 10:13 32 *************
- 55 2021-10-04 10:14 33 **************
- ... ..( 11 skipped). .. **************
- 67 2021-10-04 10:26 33 **************
- 68 2021-10-04 10:27 ? -
- 69 2021-10-04 10:28 32 *************
- 70 2021-10-04 10:29 32 *************
- SCT Error Recovery Control command not supported
- Device Statistics (GP/SMART Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 91 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement