Guest User

Ryzehosting 9950X

a guest
Nov 3rd, 2025
197
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.12 KB | Science | 0 0
  1. Architecture: x86_64
  2. CPU op-mode(s): 32-bit, 64-bit
  3. Address sizes: 48 bits physical, 48 bits virtual
  4. Byte Order: Little Endian
  5. CPU(s): 8
  6. On-line CPU(s) list: 0-7
  7. Vendor ID: AuthenticAMD
  8. Model name: AMD Ryzen 9 9950X 16-Core Processor
  9. CPU family: 26
  10. Model: 68
  11. Thread(s) per core: 1
  12. Core(s) per socket: 8
  13. Socket(s): 1
  14. Stepping: 0
  15. BogoMIPS: 8583.83
  16. Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm rep_good nopl cpuid extd_api
  17. cid tsc_known_freq pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm cr8_legacy ab
  18. m sse4a misalignsse 3dnowprefetch osvw perfctr_core ssbd perfmon_v2 ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid avx512f avx512d
  19. q rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves avx_vnni avx512_bf16 clzero xsaveerptr wbnoinvd arat npt lbrv nr
  20. ip_save tsc_scale vmcb_clean flushbyasid pausefilter pfthreshold v_vmsave_vmload vgif vnmi avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bita
  21. lg avx512_vpopcntdq rdpid movdiri movdir64b overflow_recov succor fsrm avx512_vp2intersect flush_l1d arch_capabilities
  22. Virtualization features:
  23. Virtualization: AMD-V
  24. Hypervisor vendor: KVM
  25. Virtualization type: full
  26. Caches (sum of all):
  27. L1d: 512 KiB (8 instances)
  28. L1i: 512 KiB (8 instances)
  29. L2: 4 MiB (8 instances)
  30. L3: 128 MiB (8 instances)
  31. NUMA:
  32. NUMA node(s): 1
  33. NUMA node0 CPU(s): 0-7
  34. Vulnerabilities:
  35. Gather data sampling: Not affected
  36. Ghostwrite: Not affected
  37. Indirect target selection: Not affected
  38. Itlb multihit: Not affected
  39. L1tf: Not affected
  40. Mds: Not affected
  41. Meltdown: Not affected
  42. Mmio stale data: Not affected
  43. Reg file data sampling: Not affected
  44. Retbleed: Not affected
  45. Spec rstack overflow: Mitigation; Safe RET
  46. Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
  47. Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
  48. Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP disabled; PBRSB-eIBRS Not affected; BHI Not affected
  49. Srbds: Not affected
  50. Tsa: Not affected
  51. Tsx async abort: Not affected
  52. Vmscape: Not affected
  53.  
  54. #######################################################################################
  55.  
  56. 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
  57. 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
  58. 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
  59. 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)
  60. 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
  61. 00:02.0 VGA compatible controller: Device 1234:1111 (rev 02)
  62. 00:03.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon
  63. 00:05.0 SCSI storage controller: Red Hat, Inc. Virtio SCSI
  64. 00:08.0 Communication controller: Red Hat, Inc. Virtio console
  65. 00:12.0 Ethernet controller: Red Hat, Inc. Virtio network device
  66. 00:1e.0 PCI bridge: Red Hat, Inc. QEMU PCI-PCI bridge
  67. 00:1f.0 PCI bridge: Red Hat, Inc. QEMU PCI-PCI bridge
  68.  
  69. #######################################################################################
  70.  
  71. PING ipv4.ipv64.net (144.76.85.238) 56(84) bytes of data.
  72. 64 bytes from mail.schroederdennis.de (144.76.85.238): icmp_seq=1 ttl=55 time=11.9 ms
  73. 64 bytes from mail.schroederdennis.de (144.76.85.238): icmp_seq=2 ttl=55 time=11.8 ms
  74. 64 bytes from mail.schroederdennis.de (144.76.85.238): icmp_seq=3 ttl=55 time=11.9 ms
  75. 64 bytes from mail.schroederdennis.de (144.76.85.238): icmp_seq=4 ttl=55 time=11.9 ms
  76. 64 bytes from mail.schroederdennis.de (144.76.85.238): icmp_seq=5 ttl=55 time=12.0 ms
  77. --- ipv4.ipv64.net ping statistics ---
  78. 5 packets transmitted, 5 received, 0% packet loss, time 4007ms
  79. rtt min/avg/max/mdev = 11.833/11.889/11.976/0.050 ms
  80.  
  81. PING ipv6.ipv64.net (2a01:4f8:192:1326::bad:c0de) 56 data bytes
  82. 64 bytes from ipv64.net (2a01:4f8:192:1326::bad:c0de): icmp_seq=1 ttl=56 time=12.0 ms
  83. 64 bytes from ipv64.net (2a01:4f8:192:1326::bad:c0de): icmp_seq=2 ttl=56 time=11.9 ms
  84. 64 bytes from ipv64.net (2a01:4f8:192:1326::bad:c0de): icmp_seq=3 ttl=56 time=11.9 ms
  85. 64 bytes from ipv64.net (2a01:4f8:192:1326::bad:c0de): icmp_seq=4 ttl=56 time=11.9 ms
  86. 64 bytes from ipv64.net (2a01:4f8:192:1326::bad:c0de): icmp_seq=5 ttl=56 time=11.9 ms
  87. --- ipv6.ipv64.net ping statistics ---
  88. 5 packets transmitted, 5 received, 0% packet loss, time 4005ms
  89. rtt min/avg/max/mdev = 11.914/11.939/11.955/0.013 ms
  90.  
  91. #######################################################################################
  92.  
  93. iperf3 -c speedtest.myloc.de -p 5200 -P 10 -4
  94. [SUM] 0.00-10.00 sec 5.78 GBytes 4.97 Gbits/sec 9933 sender
  95. [SUM] 0.00-10.01 sec 5.76 GBytes 4.94 Gbits/sec receiver
  96.  
  97. iperf3 -c speedtest.myloc.de -p 5200 -P 10 -4 -R
  98. [SUM] 0.00-10.01 sec 6.98 GBytes 5.99 Gbits/sec 5146 sender
  99. [SUM] 0.00-10.00 sec 6.95 GBytes 5.97 Gbits/sec receiver
  100.  
  101. #######################################################################################
  102.  
  103. sysbench cpu run
  104. sysbench 1.0.20 (using system LuaJIT 2.1.1700206165)
  105.  
  106. Running the test with following options:
  107. Number of threads: 1
  108. Initializing random number generator from current time
  109.  
  110.  
  111. Prime numbers limit: 10000
  112.  
  113. Initializing worker threads...
  114.  
  115. Threads started!
  116.  
  117. CPU speed:
  118. events per second: 6928.13
  119.  
  120. General statistics:
  121. total time: 10.0001s
  122. total number of events: 69287
  123.  
  124. Latency (ms):
  125. min: 0.14
  126. avg: 0.14
  127. max: 1.03
  128. 95th percentile: 0.15
  129. sum: 9992.03
  130.  
  131. Threads fairness:
  132. events (avg/stddev): 69287.0000/0.00
  133. execution time (avg/stddev): 9.9920/0.00
  134.  
  135. sysbench cpu run --threads=8
  136. sysbench 1.0.20 (using system LuaJIT 2.1.1700206165)
  137.  
  138. Running the test with following options:
  139. Number of threads: 8
  140. Initializing random number generator from current time
  141.  
  142.  
  143. Prime numbers limit: 10000
  144.  
  145. Initializing worker threads...
  146.  
  147. Threads started!
  148.  
  149. CPU speed:
  150. events per second: 53563.34
  151.  
  152. General statistics:
  153. total time: 10.0001s
  154. total number of events: 535679
  155.  
  156. Latency (ms):
  157. min: 0.14
  158. avg: 0.15
  159. max: 5.14
  160. 95th percentile: 0.16
  161. sum: 79919.90
  162.  
  163. Threads fairness:
  164. events (avg/stddev): 66959.8750/728.56
  165. execution time (avg/stddev): 9.9900/0.00
  166.  
  167. sysbench memory run
  168. sysbench 1.0.20 (using system LuaJIT 2.1.1700206165)
  169.  
  170. Running the test with following options:
  171. Number of threads: 1
  172. Initializing random number generator from current time
  173.  
  174.  
  175. Running memory speed test with the following options:
  176. block size: 1KiB
  177. total size: 102400MiB
  178. operation: write
  179. scope: global
  180.  
  181. Initializing worker threads...
  182.  
  183. Threads started!
  184.  
  185. Total operations: 96971206 (9696285.55 per second)
  186.  
  187. 94698.44 MiB transferred (9469.03 MiB/sec)
  188.  
  189.  
  190. General statistics:
  191. total time: 10.0001s
  192. total number of events: 96971206
  193.  
  194. Latency (ms):
  195. min: 0.00
  196. avg: 0.00
  197. max: 0.87
  198. 95th percentile: 0.00
  199. sum: 3769.98
  200.  
  201. Threads fairness:
  202. events (avg/stddev): 96971206.0000/0.00
  203. execution time (avg/stddev): 3.7700/0.00
  204.  
  205. #######################################################################################
  206.  
  207. dd if=/dev/zero of=/root/test.iso bs=128k count=10000
  208. 10000+0 records in
  209. 10000+0 records out
  210. 1310720000 bytes (1.3 GB, 1.2 GiB) copied, 0.761334 s, 1.7 GB/s
  211.  
  212. #######################################################################################
  213.  
  214. fio --name=write-test --size=1G --filename=/root/fio-testfile --bs=128k --rw=write --direct=1 --numjobs=1 --time_based --runtime=30 --group_reporting
  215.  
  216. Run status group 0 (all jobs):
  217. WRITE: bw=2418MiB/s (2535MB/s), 2418MiB/s-2418MiB/s (2535MB/s-2535MB/s), io=70.8GiB (76.1GB), run=30001-30001msec
  218.  
  219. fio --name=read-test --size=1G --filename=/root/fio-testfile --bs=128k --rw=read --direct=1 --numjobs=1 --time_based --runtime=30 --group_reporting
  220.  
  221. Run status group 0 (all jobs):
  222. READ: bw=3428MiB/s (3594MB/s), 3428MiB/s-3428MiB/s (3594MB/s-3594MB/s), io=100GiB (108GB), run=30001-30001msec
  223.  
  224. fio --name=realistic-test --filename=/root/fio-testfile --size=2G --bs=64k --rw=randrw --rwmixread=70 --direct=1 --iodepth=16 --numjobs=4 --time_based --runtime=60 --group_reporting
  225.  
  226. Run status group 0 (all jobs):
  227. READ: bw=3476MiB/s (3644MB/s), 3476MiB/s-3476MiB/s (3644MB/s-3644MB/s), io=204GiB (219GB), run=60002-60002msec
  228. WRITE: bw=1492MiB/s (1565MB/s), 1492MiB/s-1492MiB/s (1565MB/s-1565MB/s), io=87.4GiB (93.9GB), run=60002-60002msec
  229.  
Tags: Ryzehosting
Advertisement
Add Comment
Please, Sign In to add comment