Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.6-gentoo (root@Z21X9E) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #17 SMP Thu Feb 23 08:44:33 CET 2012
- [ 0.000000] Command line: root=/dev/sdb2 video=uvesafb:1280x1024-32,mtrr:3,ywrap
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
- [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000009ae3f000 (usable)
- [ 0.000000] BIOS-e820: 000000009ae3f000 - 000000009aebf000 (reserved)
- [ 0.000000] BIOS-e820: 000000009aebf000 - 000000009afbf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000009afbf000 - 000000009afff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000009afff000 - 000000009b000000 (usable)
- [ 0.000000] BIOS-e820: 000000009b000000 - 000000009fa00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 000000025fe00000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] DMI: Sony Corporation VPCZ21X9E/VAIO, BIOS R0170H5 06/16/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-combining
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FE0000000 write-back
- [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
- [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
- [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.000000] 5 base 100000000 mask F00000000 write-back
- [ 0.000000] 6 base 200000000 mask FC0000000 write-back
- [ 0.000000] 7 base 240000000 mask FF0000000 write-back
- [ 0.000000] 8 base 250000000 mask FF0000000 write-back
- [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] last_pfn = 0x9b000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-000000009b000000
- [ 0.000000] 0000000000 - 009b000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 9b000000 @ 1fffc000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-000000025fe00000
- [ 0.000000] 0100000000 - 025fe00000 page 2M
- [ 0.000000] kernel direct mapping tables up to 25fe00000 @ 9ae34000-9ae3f000
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony)
- [ 0.000000] ACPI: XSDT 000000009affe120 000AC (v01 Sony VAIO 20110616 01000013)
- [ 0.000000] ACPI: FACP 000000009affb000 000F4 (v04 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: DSDT 000000009afef000 085DF (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: FACS 000000009af6e000 00040
- [ 0.000000] ACPI: TCPA 000000009affd000 00032 (v02 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: HPET 000000009affa000 00038 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: APIC 000000009aff9000 0008C (v02 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SLIC 000000009afee000 00176 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: WDAT 000000009afed000 00224 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afec000 00CA6 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: BOOT 000000009afea000 00028 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afe8000 0022B (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: ASPT 000000009afe5000 00034 (v07 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afe4000 00804 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afe3000 00996 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: DMAR 000000009afe2000 000E8 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afe1000 00EE8 (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afe0000 002DD (v01 Sony VAIO 20110616 ACPI 00040000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000025fe00000
- [ 0.000000] Initmem setup node 0 0000000000000000-000000025fe00000
- [ 0.000000] NODE_DATA [000000025fdfb000 - 000000025fdfffff]
- [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x0025fe00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[4] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009b
- [ 0.000000] 0: 0x00000100 -> 0x0009ae3f
- [ 0.000000] 0: 0x0009afff -> 0x0009b000
- [ 0.000000] 0: 0x00100000 -> 0x0025fe00
- [ 0.000000] On node 0 totalpages: 2075595
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 614016 pages, LIFO batch:31
- [ 0.000000] Normal zone: 22520 pages used for memmap
- [ 0.000000] Normal zone: 1418760 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 000000009ae3f000 - 000000009aebf000
- [ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
- [ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
- [ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
- [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
- [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
- [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
- [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
- [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
- [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
- [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88025fa00000 s76224 r8192 d22080 u524288
- [ 0.000000] pcpu-alloc: s76224 r8192 d22080 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036686
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/sdb2 video=uvesafb:1280x1024-32,mtrr:3,ywrap
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 8089876k/9959424k available (7378k kernel code, 1657044k absent, 212504k reserved, 5567k data, 756k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.001000] Detected 2693.913 MHz processor.
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.82 BogoMIPS (lpj=2693913)
- [ 0.000147] pid_max: default: 32768 minimum: 301
- [ 0.000230] Security Framework initialized
- [ 0.000311] SELinux: Initializing.
- [ 0.000385] SELinux: Starting in permissive mode
- [ 0.000934] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.002571] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.003293] Mount-cache hash table entries: 256
- [ 0.003451] Initializing cgroup subsys cpuacct
- [ 0.003524] Initializing cgroup subsys freezer
- [ 0.003615] CPU: Physical Processor ID: 0
- [ 0.003685] CPU: Processor Core ID: 0
- [ 0.003758] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.003759] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.003908] mce: CPU supports 7 MCE banks
- [ 0.003988] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004065] using mwait in idle threads.
- [ 0.004205] ACPI: Core revision 20110623
- [ 0.020738] DMAR: Host address width 36
- [ 0.020809] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.020886] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
- [ 0.020987] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.021063] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
- [ 0.021163] DMAR: RMRR base: 0x0000009ae9c000 end: 0x0000009aebbfff
- [ 0.021247] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009f9fffff
- [ 0.021844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.031916] CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07
- [ 0.133204] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
- [ 0.133423] PEBS disabled due to CPU errata.
- [ 0.133495] ... version: 3
- [ 0.133565] ... bit width: 48
- [ 0.133636] ... generic registers: 4
- [ 0.133707] ... value mask: 0000ffffffffffff
- [ 0.133780] ... max period: 000000007fffffff
- [ 0.133853] ... fixed-purpose events: 3
- [ 0.133922] ... event mask: 000000070000000f
- [ 0.134099] Booting Node 0, Processors #1
- [ 0.134185] smpboot cpu 1: start_ip = 96000
- [ 0.225327] #2
- [ 0.225371] smpboot cpu 2: start_ip = 96000
- [ 0.316277] #3 Ok.
- [ 0.316347] smpboot cpu 3: start_ip = 96000
- [ 0.407140] Brought up 4 CPUs
- [ 0.407211] Total of 4 processors activated (21549.04 BogoMIPS).
- [ 0.410400] PM: Registering ACPI NVS region at 9aebf000 (1048576 bytes)
- [ 0.410558] RTC time: 9:28:09, date: 02/23/12
- [ 0.410650] NET: Registered protocol family 16
- [ 0.410787] kworker/u:0 used greatest stack depth: 5496 bytes left
- [ 0.411058] ACPI: bus type pci registered
- [ 0.411206] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.411312] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.444457] PCI: Using configuration type 1 for base access
- [ 0.450631] bio: create slab <bio-0> at 0
- [ 0.450795] ACPI: Added _OSI(Module Device)
- [ 0.450867] ACPI: Added _OSI(Processor Device)
- [ 0.450938] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.451011] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.452351] ACPI: EC: Look up EC in DSDT
- [ 0.453606] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.459141] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.463870] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.464377] ACPI: Dynamic OEM Table Load:
- [ 0.464526] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.468328] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.468853] ACPI: Dynamic OEM Table Load:
- [ 0.469001] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.474220] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.474716] ACPI: Dynamic OEM Table Load:
- [ 0.474865] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20110616 INTL 20100121)
- [ 0.883161] ACPI: Interpreter enabled
- [ 0.883233] ACPI: (supports S0 S3 S4 S5)
- [ 0.883475] ACPI: Using IOAPIC for interrupt routing
- [ 0.894084] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 0.894194] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.894532] \_SB_.PCI0:_OSC invalid UUID
- [ 0.894533] _OSC request data:1 8 1f
- [ 0.894536] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.895025] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.895101] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.895176] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.895278] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
- [ 0.895387] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
- [ 0.895421] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
- [ 0.895430] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
- [ 0.895435] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 0.895439] pci 0000:00:02.0: reg 20: [io 0xa000-0xa03f]
- [ 0.895488] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
- [ 0.895511] pci 0000:00:16.0: reg 10: [mem 0xd9404000-0xd940400f 64bit]
- [ 0.895585] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.895589] pci 0000:00:16.0: PME# disabled
- [ 0.895619] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
- [ 0.895921] pci 0000:00:1a.0: reg 10: [mem 0xd9409000-0xd94093ff]
- [ 0.897677] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.897682] pci 0000:00:1a.0: PME# disabled
- [ 0.897706] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
- [ 0.897721] pci 0000:00:1b.0: reg 10: [mem 0xd9400000-0xd9403fff 64bit]
- [ 0.897786] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.897790] pci 0000:00:1b.0: PME# disabled
- [ 0.897810] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
- [ 0.897889] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.897893] pci 0000:00:1c.0: PME# disabled
- [ 0.897915] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
- [ 0.897994] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.897999] pci 0000:00:1c.1: PME# disabled
- [ 0.898025] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
- [ 0.898103] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.898107] pci 0000:00:1c.2: PME# disabled
- [ 0.898130] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
- [ 0.898204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.898208] pci 0000:00:1c.3: PME# disabled
- [ 0.898238] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
- [ 0.898369] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.898374] pci 0000:00:1c.6: PME# disabled
- [ 0.898409] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
- [ 0.898709] pci 0000:00:1d.0: reg 10: [mem 0xd9408000-0xd94083ff]
- [ 0.900472] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.900476] pci 0000:00:1d.0: PME# disabled
- [ 0.900499] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601
- [ 0.900620] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
- [ 0.900638] pci 0000:00:1f.2: reg 10: [io 0xa088-0xa08f]
- [ 0.900646] pci 0000:00:1f.2: reg 14: [io 0xa094-0xa097]
- [ 0.900653] pci 0000:00:1f.2: reg 18: [io 0xa080-0xa087]
- [ 0.900661] pci 0000:00:1f.2: reg 1c: [io 0xa090-0xa093]
- [ 0.900669] pci 0000:00:1f.2: reg 20: [io 0xa060-0xa07f]
- [ 0.900677] pci 0000:00:1f.2: reg 24: [mem 0xd9407000-0xd94077ff]
- [ 0.900720] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.900724] pci 0000:00:1f.2: PME# disabled
- [ 0.900741] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
- [ 0.900755] pci 0000:00:1f.3: reg 10: [mem 0xd9405000-0xd94050ff 64bit]
- [ 0.900776] pci 0000:00:1f.3: reg 20: [io 0xa040-0xa05f]
- [ 0.901004] pci 0000:02:00.0: [8086:0091] type 0 class 0x000280
- [ 0.901151] pci 0000:02:00.0: reg 10: [mem 0xd8400000-0xd8401fff 64bit]
- [ 0.901823] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.901859] pci 0000:02:00.0: PME# disabled
- [ 0.904008] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.904084] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
- [ 0.904088] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
- [ 0.904094] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.904166] pci 0000:03:00.0: [10ec:5209] type 0 class 0x00ff00
- [ 0.904192] pci 0000:03:00.0: reg 10: [mem 0xd7400000-0xd7400fff]
- [ 0.904374] pci 0000:03:00.0: supports D1 D2
- [ 0.904376] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
- [ 0.904381] pci 0000:03:00.0: PME# disabled
- [ 0.905886] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 0.905998] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
- [ 0.906003] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
- [ 0.906010] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.906077] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
- [ 0.906103] pci 0000:04:00.0: reg 10: [mem 0xd6400000-0xd6401fff 64bit]
- [ 0.906234] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
- [ 0.906239] pci 0000:04:00.0: PME# disabled
- [ 0.907884] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 0.907996] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
- [ 0.908000] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
- [ 0.908006] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
- [ 0.908129] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
- [ 0.908191] pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff]
- [ 0.908309] pci 0000:05:00.0: reg 18: [mem 0xd3404000-0xd3404fff 64bit pref]
- [ 0.908383] pci 0000:05:00.0: reg 20: [mem 0xd3400000-0xd3403fff 64bit pref]
- [ 0.908706] pci 0000:05:00.0: supports D1 D2
- [ 0.908707] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.908722] pci 0000:05:00.0: PME# disabled
- [ 0.910922] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
- [ 0.911022] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
- [ 0.911026] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
- [ 0.911032] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
- [ 0.911103] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
- [ 0.911178] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
- [ 0.911183] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
- [ 0.911192] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
- [ 0.911219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.911269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.911292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.911314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
- [ 0.911335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
- [ 0.911356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
- [ 0.911416] \_SB_.PCI0:_OSC invalid UUID
- [ 0.911417] _OSC request data:1 1f 1f
- [ 0.911420] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.911515] \_SB_.PCI0:_OSC invalid UUID
- [ 0.911516] _OSC request data:1 0 1d
- [ 0.911519] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
- [ 0.911622] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.913961] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
- [ 0.914604] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
- [ 0.915180] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
- [ 0.915752] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- [ 0.916326] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
- [ 0.916966] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.917639] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- [ 0.918218] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- [ 0.918835] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.918944] vgaarb: loaded
- [ 0.919013] vgaarb: bridge control possible 0000:00:02.0
- [ 0.919176] SCSI subsystem initialized
- [ 0.919310] libata version 3.00 loaded.
- [ 0.919361] usbcore: registered new interface driver usbfs
- [ 0.919458] usbcore: registered new interface driver hub
- [ 0.919558] usbcore: registered new device driver usb
- [ 0.919781] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.919859] PCI: Using ACPI for IRQ routing
- [ 0.926801] PCI: pci_cache_line_size set to 64 bytes
- [ 0.926929] reserve RAM buffer: 000000000009b800 - 000000000009ffff
- [ 0.926931] reserve RAM buffer: 000000009ae3f000 - 000000009bffffff
- [ 0.926933] reserve RAM buffer: 000000009b000000 - 000000009bffffff
- [ 0.926934] reserve RAM buffer: 000000025fe00000 - 000000025fffffff
- [ 0.927062] Bluetooth: Core ver 2.16
- [ 0.927154] NET: Registered protocol family 31
- [ 0.927225] Bluetooth: HCI device and connection manager initialized
- [ 0.927301] Bluetooth: HCI socket layer initialized
- [ 0.927431] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.927611] NetLabel: Initializing
- [ 0.927682] NetLabel: domain hash size = 128
- [ 0.927752] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.927834] NetLabel: unlabeled traffic allowed by default
- [ 0.927965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.928389] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.930475] Switching to clocksource hpet
- [ 0.934645] pnp: PnP ACPI init
- [ 0.934726] ACPI: bus type pnp registered
- [ 0.935017] pnp 00:00: [bus 00-fe]
- [ 0.935019] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.935021] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.935022] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.935024] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.935025] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 0.935027] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 0.935028] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 0.935029] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 0.935031] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 0.935032] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 0.935035] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 0.935036] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 0.935038] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 0.935039] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 0.935040] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 0.935042] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 0.935043] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 0.935045] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
- [ 0.935130] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.935185] pnp 00:01: [io 0x0000-0x001f]
- [ 0.935186] pnp 00:01: [io 0x0081-0x0091]
- [ 0.935187] pnp 00:01: [io 0x0093-0x009f]
- [ 0.935189] pnp 00:01: [io 0x00c0-0x00df]
- [ 0.935190] pnp 00:01: [dma 4]
- [ 0.935231] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.935237] pnp 00:02: [mem 0xff000000-0xffffffff]
- [ 0.935279] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.935334] pnp 00:03: [mem 0xfed00000-0xfed003ff]
- [ 0.935373] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.935381] pnp 00:04: [io 0x00f0]
- [ 0.935389] pnp 00:04: [irq 13]
- [ 0.935429] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.935438] pnp 00:05: [io 0x002e-0x002f]
- [ 0.935439] pnp 00:05: [io 0x004e-0x004f]
- [ 0.935440] pnp 00:05: [io 0x0061]
- [ 0.935441] pnp 00:05: [io 0x0063]
- [ 0.935442] pnp 00:05: [io 0x0065]
- [ 0.935444] pnp 00:05: [io 0x0067]
- [ 0.935445] pnp 00:05: [io 0x0070]
- [ 0.935446] pnp 00:05: [io 0x0080]
- [ 0.935447] pnp 00:05: [io 0x0092]
- [ 0.935448] pnp 00:05: [io 0x00b2-0x00b3]
- [ 0.935449] pnp 00:05: [io 0x0680-0x069f]
- [ 0.935450] pnp 00:05: [io 0x1000-0x100f]
- [ 0.935452] pnp 00:05: [io 0xffff]
- [ 0.935453] pnp 00:05: [io 0xffff]
- [ 0.935454] pnp 00:05: [io 0x0400-0x0453]
- [ 0.935455] pnp 00:05: [io 0x0458-0x047f]
- [ 0.935456] pnp 00:05: [io 0x0500-0x057f]
- [ 0.935457] pnp 00:05: [io 0x164e-0x164f]
- [ 0.935458] pnp 00:05: [io 0x2000]
- [ 0.935460] pnp 00:05: [io 0x2004]
- [ 0.935523] system 00:05: [io 0x0680-0x069f] has been reserved
- [ 0.935598] system 00:05: [io 0x1000-0x100f] has been reserved
- [ 0.935678] system 00:05: [io 0xffff] has been reserved
- [ 0.935751] system 00:05: [io 0xffff] has been reserved
- [ 0.935824] system 00:05: [io 0x0400-0x0453] has been reserved
- [ 0.935899] system 00:05: [io 0x0458-0x047f] has been reserved
- [ 0.935972] system 00:05: [io 0x0500-0x057f] has been reserved
- [ 0.936047] system 00:05: [io 0x164e-0x164f] has been reserved
- [ 0.936121] system 00:05: [io 0x2000] has been reserved
- [ 0.936194] system 00:05: [io 0x2004] has been reserved
- [ 0.936269] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.936276] pnp 00:06: [io 0x0070-0x0077]
- [ 0.936280] pnp 00:06: [irq 8]
- [ 0.936320] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.936336] pnp 00:07: [io 0x0454-0x0457]
- [ 0.936388] system 00:07: [io 0x0454-0x0457] has been reserved
- [ 0.936463] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.936474] pnp 00:08: [io 0x0060]
- [ 0.936475] pnp 00:08: [io 0x0064]
- [ 0.936481] pnp 00:08: [irq 1]
- [ 0.936521] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.936534] pnp 00:09: [irq 12]
- [ 0.936577] pnp 00:09: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active)
- [ 0.936596] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
- [ 0.936639] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 0.936724] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
- [ 0.936726] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
- [ 0.936727] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
- [ 0.936728] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
- [ 0.936730] pnp 00:0b: [mem 0xe0000000-0xefffffff]
- [ 0.936731] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
- [ 0.936732] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
- [ 0.936733] pnp 00:0b: [mem 0xff000000-0xffffffff]
- [ 0.936735] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
- [ 0.936736] pnp 00:0b: [mem 0x9fa00000-0x9fa00fff]
- [ 0.936792] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.936868] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.936943] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.937019] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.937093] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.937168] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.937243] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.937319] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.937394] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.937470] system 00:0b: [mem 0x9fa00000-0x9fa00fff] has been reserved
- [ 0.937545] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.937995] pnp 00:0c: [mem 0x20000000-0x201fffff]
- [ 0.937997] pnp 00:0c: [mem 0x40000000-0x401fffff]
- [ 0.938067] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
- [ 0.938143] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
- [ 0.938220] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.938233] pnp: PnP ACPI: found 13 devices
- [ 0.938304] ACPI: ACPI bus type pnp unregistered
- [ 0.942968] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.943009] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 0.943083] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
- [ 0.943160] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff]
- [ 0.943237] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.943343] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 0.943417] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
- [ 0.943495] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff]
- [ 0.943573] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.943688] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 0.943763] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
- [ 0.943839] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff]
- [ 0.943916] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
- [ 0.944022] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
- [ 0.944096] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
- [ 0.944173] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff]
- [ 0.944250] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref]
- [ 0.944355] pci 0000:00:1c.6: PCI bridge to [bus 08-20]
- [ 0.944429] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff]
- [ 0.944509] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff]
- [ 0.944587] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref]
- [ 0.944719] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.944798] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.944807] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.944883] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.944891] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.944968] pci 0000:00:1c.2: setting latency timer to 64
- [ 0.944976] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.945053] pci 0000:00:1c.3: setting latency timer to 64
- [ 0.945060] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.945139] pci 0000:00:1c.6: setting latency timer to 64
- [ 0.945142] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.945144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.945145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.945147] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
- [ 0.945149] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
- [ 0.945150] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff]
- [ 0.945152] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.945154] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
- [ 0.945155] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff]
- [ 0.945157] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.945158] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
- [ 0.945160] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff]
- [ 0.945161] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
- [ 0.945163] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
- [ 0.945164] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff]
- [ 0.945166] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref]
- [ 0.945167] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff]
- [ 0.945169] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff]
- [ 0.945170] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref]
- [ 0.945191] NET: Registered protocol family 2
- [ 0.945434] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.946304] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.947497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.947708] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.947784] TCP reno registered
- [ 0.947865] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.947969] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.948114] NET: Registered protocol family 1
- [ 0.948253] RPC: Registered named UNIX socket transport module.
- [ 0.948328] RPC: Registered udp transport module.
- [ 0.948400] RPC: Registered tcp transport module.
- [ 0.948471] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.948553] pci 0000:00:02.0: Boot video device
- [ 0.948574] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.959788] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.989475] PCI: CLS 64 bytes, default 64
- [ 0.989617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.989704] Placing 64MB software IO TLB between ffff880096e34000 - ffff88009ae34000
- [ 0.989807] software IO TLB at phys 0x96e34000 - 0x9ae34000
- [ 0.989889] Simple Boot Flag at 0x44 set to 0x1
- [ 0.991167] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
- [ 0.991246] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
- [ 0.991321] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
- [ 0.991402] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
- [ 0.991511] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.991847] audit: initializing netlink socket (disabled)
- [ 0.991930] type=2000 audit(1329989289.820:1): initialized
- [ 1.014220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.017146] VFS: Disk quotas dquot_6.5.2
- [ 1.017277] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.018069] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.018336] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.019035] fuse init (API version 7.17)
- [ 1.019233] msgmni has been set to 15800
- [ 1.019378] SELinux: Registering netfilter hooks
- [ 1.019767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.019870] io scheduler noop registered
- [ 1.019940] io scheduler deadline registered
- [ 1.020055] io scheduler cfq registered (default)
- [ 1.020560] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.090133] Non-volatile memory driver v1.3
- [ 1.090206] Linux agpgart interface v0.103
- [ 1.090321] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
- [ 1.090477] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 1.091681] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
- [ 1.091866] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
- [ 1.091991] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102
- [ 1.092427] v86d used greatest stack depth: 5480 bytes left
- [ 1.092630] uvesafb: Intel Corporation, Intel(R)Sandybridge Mobile Graphics Controller, Hardware Version 0.0, OEM: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS, VBE v3.0
- [ 1.142413] uvesafb: VBIOS/hardware supports DDC2 transfers
- [ 1.145428] uvesafb: monitor limits: vf = 61 Hz, hf = 55 kHz, clk = 110 MHz
- [ 1.145547] uvesafb: scrolling: redraw
- [ 1.145628] mtrr: no more MTRRs available
- [ 1.147337] fbcon: VESA VGA (fb0) is primary device
- [ 1.340864] Console: switching to colour frame buffer device 200x56
- [ 1.343451] uvesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011b80000, using 11250k, total 65472k
- [ 1.343483] fb0: VESA VGA frame buffer device
- [ 1.343605] ACPI: AC Adapter [ADP1] (on-line)
- [ 1.343762] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 1.343801] ACPI: Lid Switch [LID0]
- [ 1.343865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 1.343895] ACPI: Power Button [PWRB]
- [ 1.344246] Monitor-Mwait will be used to enter C-1 state
- [ 1.344273] Monitor-Mwait will be used to enter C-3 state
- [ 1.344288] ACPI: acpi_idle registered with cpuidle
- [ 1.346947] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.346970] ACPI: Thermal Zone [TZ01] (53 C)
- [ 1.347099] [drm] Initialized drm 1.1.0 20060810
- [ 1.349079] brd: module loaded
- [ 1.350164] loop: module loaded
- [ 1.350501] ahci 0000:00:1f.2: version 3.0
- [ 1.350549] ahci 0000:00:1f.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.350630] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
- [ 1.350674] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
- [ 1.350703] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst
- [ 1.350733] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.351581] ACPI: Battery Slot [BAT1] (battery present)
- [ 1.351628] ACPI: Battery Slot [BAT2] (battery absent)
- [ 1.351683] scsi0 : ahci
- [ 1.351799] scsi1 : ahci
- [ 1.351889] scsi2 : ahci
- [ 1.351979] scsi3 : ahci
- [ 1.352068] scsi4 : ahci
- [ 1.352160] scsi5 : ahci
- [ 1.352403] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 40
- [ 1.352431] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 40
- [ 1.352457] ata3: DUMMY
- [ 1.353275] ata4: DUMMY
- [ 1.354072] ata5: DUMMY
- [ 1.354844] ata6: DUMMY
- [ 1.355863] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.356659] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.357469] r8169 0000:05:00.0: setting latency timer to 64
- [ 1.357559] r8169 0000:05:00.0: irq 41 for MSI/MSI-X
- [ 1.357778] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c76000, 54:42:49:99:19:ef, XID 0c900800 IRQ 41
- [ 1.358583] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 1.359416] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
- [ 1.360238] Copyright(c) 2003-2011 Intel Corporation
- [ 1.361106] iwlwifi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.361956] iwlwifi 0000:02:00.0: setting latency timer to 64
- [ 1.361989] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
- [ 1.362794] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000c78000
- [ 1.363591] iwlwifi 0000:02:00.0: HW Revision ID = 0x34
- [ 1.364688] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
- [ 1.364795] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
- [ 1.365728] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
- [ 1.383880] iwlwifi 0000:02:00.0: device EEPROM VER=0x716, CALIB=0x6
- [ 1.384668] iwlwifi 0000:02:00.0: Device SKU: 0X1f0
- [ 1.385433] iwlwifi 0000:02:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
- [ 1.386214] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
- [ 1.387195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.387985] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 1.388000] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.388802] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.388805] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 1.389614] drivers/usb/core/inode.c: creating file 'devices'
- [ 1.389616] drivers/usb/core/inode.c: creating file '001'
- [ 1.389655] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.390472] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 1.390476] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 1.390487] ehci_hcd 0000:00:1a.0: support lpm
- [ 1.390497] ehci_hcd 0000:00:1a.0: debug port 2
- [ 1.391307] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.395204] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.395205] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
- [ 1.395216] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xd9409000
- [ 1.396011] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.399898] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 1.405538] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.406418] usb usb1: default language 0x0409
- [ 1.406422] usb usb1: udev 1, busnum 1, minor = 0
- [ 1.406424] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.407217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.408007] usb usb1: Product: EHCI Host Controller
- [ 1.408782] usb usb1: Manufacturer: Linux 3.2.6-gentoo ehci_hcd
- [ 1.409551] usb usb1: SerialNumber: 0000:00:1a.0
- [ 1.410358] usb usb1: usb_probe_device
- [ 1.410360] usb usb1: configuration #1 chosen from 1 choice
- [ 1.410365] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 1.410406] hub 1-0:1.0: usb_probe_interface
- [ 1.410408] hub 1-0:1.0: usb_probe_interface - got id
- [ 1.410409] hub 1-0:1.0: USB hub found
- [ 1.411162] hub 1-0:1.0: 2 ports detected
- [ 1.411909] hub 1-0:1.0: standalone hub
- [ 1.411910] hub 1-0:1.0: no power switching (usb 1.0)
- [ 1.411911] hub 1-0:1.0: individual port over-current protection
- [ 1.411913] hub 1-0:1.0: power on to power good time: 20ms
- [ 1.411915] hub 1-0:1.0: local power source is good
- [ 1.411917] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 1.411931] drivers/usb/core/inode.c: creating file '001'
- [ 1.411960] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.412734] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.412737] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 1.413490] drivers/usb/core/inode.c: creating file '002'
- [ 1.413544] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.414319] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 1.414322] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 1.414331] ehci_hcd 0000:00:1d.0: support lpm
- [ 1.414340] ehci_hcd 0000:00:1d.0: debug port 2
- [ 1.415104] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.418997] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.418998] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 1.419012] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd9408000
- [ 1.419777] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.423663] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 1.429531] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.430371] usb usb2: default language 0x0409
- [ 1.430375] usb usb2: udev 1, busnum 2, minor = 128
- [ 1.430376] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.431125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.431885] usb usb2: Product: EHCI Host Controller
- [ 1.432637] usb usb2: Manufacturer: Linux 3.2.6-gentoo ehci_hcd
- [ 1.433395] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.434223] usb usb2: usb_probe_device
- [ 1.434225] usb usb2: configuration #1 chosen from 1 choice
- [ 1.434229] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 1.434267] hub 2-0:1.0: usb_probe_interface
- [ 1.434268] hub 2-0:1.0: usb_probe_interface - got id
- [ 1.434270] hub 2-0:1.0: USB hub found
- [ 1.435055] hub 2-0:1.0: 2 ports detected
- [ 1.435844] hub 2-0:1.0: standalone hub
- [ 1.435846] hub 2-0:1.0: no power switching (usb 1.0)
- [ 1.435847] hub 2-0:1.0: individual port over-current protection
- [ 1.435848] hub 2-0:1.0: power on to power good time: 20ms
- [ 1.435851] hub 2-0:1.0: local power source is good
- [ 1.435852] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 1.435867] drivers/usb/core/inode.c: creating file '001'
- [ 1.435917] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.436724] ohci_hcd: block sizes: ed 80 td 96
- [ 1.436760] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.437611] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.438428] xhci_hcd 0000:04:00.0: setting latency timer to 64
- [ 1.438432] xhci_hcd 0000:04:00.0: xHCI Host Controller
- [ 1.439231] drivers/usb/core/inode.c: creating file '003'
- [ 1.439274] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
- [ 1.440242] xhci_hcd 0000:04:00.0: supports USB remote wakeup
- [ 1.440254] xhci_hcd 0000:04:00.0: irq 18, io mem 0xd6400000
- [ 1.441134] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
- [ 1.441138] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
- [ 1.441141] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
- [ 1.441145] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
- [ 1.441148] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
- [ 1.441236] usb usb3: default language 0x0409
- [ 1.441240] usb usb3: udev 1, busnum 3, minor = 256
- [ 1.441241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.442081] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.442913] usb usb3: Product: xHCI Host Controller
- [ 1.443738] usb usb3: Manufacturer: Linux 3.2.6-gentoo xhci_hcd
- [ 1.444558] usb usb3: SerialNumber: 0000:04:00.0
- [ 1.445409] usb usb3: usb_probe_device
- [ 1.445411] usb usb3: configuration #1 chosen from 1 choice
- [ 1.445413] xHCI xhci_add_endpoint called for root hub
- [ 1.445414] xHCI xhci_check_bandwidth called for root hub
- [ 1.445418] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 1.445457] hub 3-0:1.0: usb_probe_interface
- [ 1.445458] hub 3-0:1.0: usb_probe_interface - got id
- [ 1.445460] hub 3-0:1.0: USB hub found
- [ 1.446254] hub 3-0:1.0: 2 ports detected
- [ 1.447031] hub 3-0:1.0: standalone hub
- [ 1.447032] hub 3-0:1.0: individual port power switching
- [ 1.447033] hub 3-0:1.0: individual port over-current protection
- [ 1.447034] hub 3-0:1.0: Single TT
- [ 1.447035] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.447037] hub 3-0:1.0: power on to power good time: 20ms
- [ 1.447040] hub 3-0:1.0: local power source is good
- [ 1.447041] hub 3-0:1.0: enabling power on all ports
- [ 1.447062] drivers/usb/core/inode.c: creating file '001'
- [ 1.447080] xhci_hcd 0000:04:00.0: xHCI Host Controller
- [ 1.447857] drivers/usb/core/inode.c: creating file '004'
- [ 1.447899] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
- [ 1.448687] xhci_hcd 0000:04:00.0: supports USB remote wakeup
- [ 1.448702] usb usb4: skipped 1 descriptor after endpoint
- [ 1.448706] usb usb4: default language 0x0409
- [ 1.448709] usb usb4: udev 1, busnum 4, minor = 384
- [ 1.448711] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.449508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.450292] usb usb4: Product: xHCI Host Controller
- [ 1.451074] usb usb4: Manufacturer: Linux 3.2.6-gentoo xhci_hcd
- [ 1.451859] usb usb4: SerialNumber: 0000:04:00.0
- [ 1.452698] usb usb4: usb_probe_device
- [ 1.452700] usb usb4: configuration #1 chosen from 1 choice
- [ 1.452701] xHCI xhci_add_endpoint called for root hub
- [ 1.452702] xHCI xhci_check_bandwidth called for root hub
- [ 1.452706] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 1.452745] hub 4-0:1.0: usb_probe_interface
- [ 1.452747] hub 4-0:1.0: usb_probe_interface - got id
- [ 1.452748] hub 4-0:1.0: USB hub found
- [ 1.453533] hub 4-0:1.0: 2 ports detected
- [ 1.454294] hub 4-0:1.0: standalone hub
- [ 1.454295] hub 4-0:1.0: individual port power switching
- [ 1.454296] hub 4-0:1.0: individual port over-current protection
- [ 1.454298] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.454299] hub 4-0:1.0: power on to power good time: 20ms
- [ 1.454301] hub 4-0:1.0: local power source is good
- [ 1.454303] hub 4-0:1.0: enabling power on all ports
- [ 1.454325] drivers/usb/core/inode.c: creating file '001'
- [ 1.476650] usbcore: registered new interface driver usblp
- [ 1.477417] Initializing USB Mass Storage driver...
- [ 1.478225] usbcore: registered new interface driver usb-storage
- [ 1.478994] USB Mass Storage support registered.
- [ 1.479797] usbcore: registered new interface driver libusual
- [ 1.480655] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.483655] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.484438] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.485321] mousedev: PS/2 mouse device common for all mice
- [ 1.486288] rtc_cmos 00:06: RTC can wake from S4
- [ 1.487169] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 1.487977] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.488817] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 1.489613] ACPI: resource 0000:00:1f.3 [io 0xa040-0xa05f] conflicts with ACPI region SMBI [io 0xa040-0xa04f]
- [ 1.490423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 1.491361] lirc_dev: IR Remote Control driver registered, major 251
- [ 1.492202] IR NEC protocol handler initialized
- [ 1.493031] IR RC5(x) protocol handler initialized
- [ 1.493870] IR RC6 protocol handler initialized
- [ 1.494690] IR JVC protocol handler initialized
- [ 1.495502] IR Sony protocol handler initialized
- [ 1.496320] IR RC5 (streamzap) protocol handler initialized
- [ 1.497131] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.497949] IR LIRC bridge handler initialized
- [ 1.498766] Linux video capture interface: v2.00
- [ 1.499653] usbcore: registered new interface driver uvcvideo
- [ 1.500462] USB Video Class driver (1.1.1)
- [ 1.501304] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- [ 1.502226] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
- [ 1.503074] iTCO_vendor_support: vendor-support=0
- [ 1.504014] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.504975] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 1.505864] usbcore: registered new interface driver btusb
- [ 1.506810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 1.507144] cpuidle: using governor ladder
- [ 1.509828] cpuidle: using governor menu
- [ 1.510694] EFI Variables Facility v0.08 2004-May-17
- [ 1.511495] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.511498] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 1.512390] usbcore: registered new interface driver usbhid
- [ 1.513258] usbhid: USB HID core driver
- [ 1.514119] Initializing Realtek PCIE storage driver...
- [ 1.514998] rts_pstor 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.515937] Resource length: 0x1000
- [ 1.516862] Original address: 0xd7400000, remapped address: 0xffffc900117c6000
- [ 1.517762] pci->irq = 17
- [ 1.518648] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 17
- [ 1.519566] rts_pstor 0000:03:00.0: setting latency timer to 64
- [ 1.535516] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.535529] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 1.546564] hub 3-0:1.0: port 2: status 0101 change 0001
- [ 1.553543] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 1.611543] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 1.611568] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.660525] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.661885] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.662716] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.662719] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.669284] ata1.00: ATA-8: SAMSUNG MZRPA256HMDR-000SO, AXM0BS1Q, max UDMA/133
- [ 1.670253] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.671162] ata2.00: ATA-8: SAMSUNG MZRPA256HMDR-000SO, AXM0BS1Q, max UDMA/133
- [ 1.672078] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.675002] ata1.00: configured for UDMA/133
- [ 1.676015] ata2.00: configured for UDMA/133
- [ 1.676070] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPA256 AXM0 PQ: 0 ANSI: 5
- [ 1.676272] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 1.676368] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.676371] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.676373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.676392] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.676914] sda: sda1 sda2
- [ 1.682517] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPA256 AXM0 PQ: 0 ANSI: 5
- [ 1.683826] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.683836] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 1.683911] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.683924] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.683926] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.683945] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.688552] sdb: sdb1 sdb2 sdb3
- [ 1.689863] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.713498] usb 1-1: new high-speed USB device number 2 using ehci_hcd
- [ 1.720728] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
- [ 1.721886] rts_pstor: waiting for device to settle before scanning
- [ 1.722267] ALSA device list:
- [ 1.722268] No soundcards found.
- [ 1.722344] Netfilter messages via NETLINK v0.30.
- [ 1.722357] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.722625] ctnetlink v0.93: registering with nfnetlink.
- [ 1.723031] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.723063] TCP cubic registered
- [ 1.723065] Initializing XFRM netlink socket
- [ 1.723341] NET: Registered protocol family 10
- [ 1.724135] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.724187] IPv6 over IPv4 tunneling driver
- [ 1.724757] NET: Registered protocol family 17
- [ 1.724761] Registering the dns_resolver key type
- [ 1.724958] PM: Checking hibernation image partition /dev/sdb1
- [ 1.724967] PM: Hibernation image partition 8:17 present
- [ 1.724968] PM: Looking for hibernation image.
- [ 1.725270] PM: Image not found (code -22)
- [ 1.725272] PM: Hibernation image not present or could not be loaded.
- [ 1.725281] registered taskstats version 1
- [ 1.725630] Magic number: 0:582:475
- [ 1.737430] console [netcon0] enabled
- [ 1.738297] netconsole: network logging started
- [ 1.765686] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.765699] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.828782] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
- [ 1.828793] ehci_hcd 0000:00:1a.0: LPM: no device attached
- [ 1.829086] usb 1-1: udev 2, busnum 1, minor = 1
- [ 1.829094] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.831903] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.835143] usb 1-1: usb_probe_device
- [ 1.835154] usb 1-1: configuration #1 chosen from 1 choice
- [ 1.835421] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 1.835752] hub 1-1:1.0: usb_probe_interface
- [ 1.835761] hub 1-1:1.0: usb_probe_interface - got id
- [ 1.835766] hub 1-1:1.0: USB hub found
- [ 1.838685] hub 1-1:1.0: 6 ports detected
- [ 1.841444] hub 1-1:1.0: standalone hub
- [ 1.841448] hub 1-1:1.0: individual port power switching
- [ 1.841452] hub 1-1:1.0: individual port over-current protection
- [ 1.841456] hub 1-1:1.0: Single TT
- [ 1.841460] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.841465] hub 1-1:1.0: power on to power good time: 100ms
- [ 1.841899] hub 1-1:1.0: local power source is good
- [ 1.841909] hub 1-1:1.0: enabling power on all ports
- [ 1.842847] drivers/usb/core/inode.c: creating file '002'
- [ 1.842899] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 1.842913] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.893769] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.893782] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.942586] hub 1-1:1.0: port 1: status 0101 change 0001
- [ 1.943120] hub 1-1:1.0: port 2: status 0101 change 0001
- [ 1.943617] hub 1-1:1.0: port 3: status 0101 change 0001
- [ 1.943901] hub 1-1:1.0: port 4: status 0101 change 0001
- [ 1.944408] usb 2-1: new high-speed USB device number 2 using ehci_hcd
- [ 1.990416] Refined TSC clocksource calibration: 2693.880 MHz.
- [ 1.993170] Switching to clocksource tsc
- [ 1.997605] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.997608] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.043347] usb 1-1: link qh256-0001/ffff880255380300 start 1 [1/0 us]
- [ 2.060538] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
- [ 2.060548] ehci_hcd 0000:00:1d.0: LPM: no device attached
- [ 2.061069] usb 2-1: udev 2, busnum 2, minor = 129
- [ 2.061078] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 2.063828] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.066962] usb 2-1: usb_probe_device
- [ 2.066973] usb 2-1: configuration #1 chosen from 1 choice
- [ 2.067193] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 2.067524] hub 2-1:1.0: usb_probe_interface
- [ 2.067533] hub 2-1:1.0: usb_probe_interface - got id
- [ 2.067538] hub 2-1:1.0: USB hub found
- [ 2.070730] hub 2-1:1.0: 8 ports detected
- [ 2.073577] hub 2-1:1.0: standalone hub
- [ 2.073581] hub 2-1:1.0: individual port power switching
- [ 2.073585] hub 2-1:1.0: individual port over-current protection
- [ 2.073589] hub 2-1:1.0: Single TT
- [ 2.073594] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 2.073598] hub 2-1:1.0: power on to power good time: 100ms
- [ 2.073930] hub 2-1:1.0: local power source is good
- [ 2.073940] hub 2-1:1.0: enabling power on all ports
- [ 2.075132] drivers/usb/core/inode.c: creating file '002'
- [ 2.075175] hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0000
- [ 2.075190] hub 3-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 2.175328] usb 2-1: link qh256-0001/ffff880255380500 start 1 [1/0 us]
- [ 2.177316] usb 3-2: new low-speed USB device number 2 using xhci_hcd
- [ 2.209669] usb 3-2: skipped 1 descriptor after interface
- [ 2.211644] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
- [ 2.214420] usb 3-2: default language 0x0409
- [ 2.219527] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
- [ 2.225626] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
- [ 2.228302] usb 3-2: udev 2, busnum 3, minor = 257
- [ 2.228308] usb 3-2: New USB device found, idVendor=046d, idProduct=c016
- [ 2.230998] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.233663] usb 3-2: Product: Optical USB Mouse
- [ 2.236270] usb 3-2: Manufacturer: Logitech
- [ 2.238870] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x850300/0x120c00
- [ 2.239152] usb 3-2: usb_probe_device
- [ 2.239160] usb 3-2: configuration #1 chosen from 1 choice
- [ 2.239175] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2.244295] usb 3-2: Successful Endpoint Configure command
- [ 2.245661] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
- [ 2.246002] usbhid 3-2:1.0: usb_probe_interface
- [ 2.246011] usbhid 3-2:1.0: usb_probe_interface - got id
- [ 2.257119] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/usb3/3-2/3-2:1.0/input/input3
- [ 2.260294] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:04:00.0-2/input0
- [ 2.263155] drivers/usb/core/inode.c: creating file '002'
- [ 2.263193] hub 1-1:1.0: state 7 ports 6 chg 001e evt 0000
- [ 2.263356] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 2.274485] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 2.279088] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
- [ 2.286678] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibilities
- [ 2.304697] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibilities
- [ 2.323004] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
- [ 2.325857] EXT4-fs (sdb2): write access will be enabled during recovery
- [ 2.336418] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
- [ 2.344058] EXT4-fs (sdb2): orphan cleanup on readonly fs
- [ 2.344766] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 946484
- [ 2.344793] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 946483
- [ 2.344801] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 922290
- [ 2.344809] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 922289
- [ 2.344817] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 922287
- [ 2.344824] EXT4-fs (sdb2): 5 orphan inodes deleted
- [ 2.346065] EXT4-fs (sdb2): recovery complete
- [ 2.348391] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 2.373806] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.376021] VFS: Mounted root (ext4 filesystem) readonly on device 8:18.
- [ 2.377547] Freeing unused kernel memory: 756k freed
- [ 2.378291] Write protecting the kernel read-only data: 12288k
- [ 2.380531] Freeing unused kernel memory: 792k freed
- [ 2.384655] Freeing unused kernel memory: 1948k freed
- [ 2.422219] usb 1-1.1: ep0 maxpacket = 8
- [ 2.423988] usb 1-1.1: default language 0x0409
- [ 2.424315] usb 1-1.1: udev 3, busnum 1, minor = 2
- [ 2.424324] usb 1-1.1: New USB device found, idVendor=08ff, idProduct=168f
- [ 2.427060] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.429821] usb 1-1.1: Product: Fingerprint Sensor
- [ 2.432741] usb 1-1.1: usb_probe_device
- [ 2.432750] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 2.432889] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 2.433079] drivers/usb/core/inode.c: creating file '003'
- [ 2.433238] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 2.489941] kbd_mode used greatest stack depth: 5408 bytes left
- [ 2.494281] loadkeys used greatest stack depth: 4960 bytes left
- [ 2.495587] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
- [ 2.495870] init-early.sh used greatest stack depth: 4432 bytes left
- [ 2.512402] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
- [ 2.539109] mount used greatest stack depth: 4144 bytes left
- [ 2.590073] usb 1-1.2: udev 4, busnum 1, minor = 3
- [ 2.590082] usb 1-1.2: New USB device found, idVendor=8086, idProduct=0189
- [ 2.593119] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.596183] usb 1-1.2: usb_probe_device
- [ 2.596185] usb 1-1.2: configuration #1 chosen from 1 choice
- [ 2.596767] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
- [ 2.596814] btusb 1-1.2:1.0: usb_probe_interface
- [ 2.596816] btusb 1-1.2:1.0: usb_probe_interface - got id
- [ 2.596921] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
- [ 2.596925] usb 1-1.2: link qh1-0601/ffff8802551ddc00 start 0 [1/2 us]
- [ 2.597005] drivers/usb/core/inode.c: creating file '004'
- [ 2.597189] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 2.608327] hub 1-1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.670301] usb 1-1.3: new high-speed USB device number 5 using ehci_hcd
- [ 2.698324] hub 1-1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.736265] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
- [ 2.739999] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 2.740205] sd 6:0:0:0: [sdc] Attached SCSI removable disk
- [ 2.746119] Bad target number (1:0)
- [ 2.746204] Bad target number (2:0)
- [ 2.746271] Bad target number (3:0)
- [ 2.746335] Bad target number (4:0)
- [ 2.746402] Bad target number (5:0)
- [ 2.746466] Bad target number (6:0)
- [ 2.746528] Bad target number (7:0)
- [ 2.746555] rts_pstor: device scan complete
- [ 2.787807] usb 1-1.3: skipped 1 descriptor after configuration
- [ 2.787816] usb 1-1.3: skipped 5 descriptors after interface
- [ 2.787823] usb 1-1.3: skipped 1 descriptor after endpoint
- [ 2.787829] usb 1-1.3: skipped 17 descriptors after interface
- [ 2.788144] usb 1-1.3: default language 0x0409
- [ 2.789888] usb 1-1.3: udev 5, busnum 1, minor = 4
- [ 2.789899] usb 1-1.3: New USB device found, idVendor=05c8, idProduct=0318
- [ 2.793508] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.793518] usb 1-1.3: Product: USB2.0 Camera
- [ 2.793524] usb 1-1.3: Manufacturer: Ricoh Company Ltd.
- [ 2.793530] usb 1-1.3: SerialNumber: 145839811AP0B00003KBH678X
- [ 2.793837] usb 1-1.3: usb_probe_device
- [ 2.793846] usb 1-1.3: configuration #1 chosen from 1 choice
- [ 2.794012] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
- [ 2.794708] uvcvideo 1-1.3:1.0: usb_probe_interface
- [ 2.794716] uvcvideo 1-1.3:1.0: usb_probe_interface - got id
- [ 2.794747] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318)
- [ 2.797010] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
- [ 2.797219] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1)
- [ 2.797445] drivers/usb/core/inode.c: creating file '005'
- [ 2.797621] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
- [ 2.808248] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
- [ 2.870293] usb 1-1.4: new high-speed USB device number 6 using ehci_hcd
- [ 2.885231] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
- [ 2.967445] usb 1-1.4: default language 0x0409
- [ 2.971939] usb 1-1.4: udev 6, busnum 1, minor = 5
- [ 2.971948] usb 1-1.4: New USB device found, idVendor=12d1, idProduct=14f1
- [ 2.971954] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
- [ 2.971960] usb 1-1.4: Product: Huawei EM680 w/Gobi Technology
- [ 2.971965] usb 1-1.4: Manufacturer: HUAWEI Incorporated
- [ 2.972205] usb 1-1.4: usb_probe_device
- [ 2.972213] usb 1-1.4: configuration #1 chosen from 1 choice
- [ 2.982325] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
- [ 2.982684] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
- [ 2.982977] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
- [ 2.983314] drivers/usb/core/inode.c: creating file '006'
- [ 2.983370] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
- [ 2.983381] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010
- [ 3.078374] udevd[1297]: starting version 171
- [ 3.168376] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
- [ 3.168565] Registered led device: phy0-led
- [ 3.168615] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 3.189884] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.189940] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
- [ 3.189969] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 3.228288] sony_laptop: Sony Notebook Control Driver v0.9np8
- [ 3.228331] sony_laptop: acpi_callreadfunc failed
- [ 3.228333] sony_laptop: Determined GFX switch ACPI path as \_SB.PCI0.OVGA._DSM.
- [ 3.228336] sony_laptop: acpi_callreadfunc failed
- [ 3.228341] \_SB.PCI0.OVGA._DSM failed: 5, func 3, para, 2.
- [ 3.228345] \_SB.PCI0.OVGA._DSM failed: 5, func 2, para, 17.
- [ 3.228666] sony_laptop: found Vaio model ID: 18485
- [ 3.242335] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input6
- [ 3.242385] input: Sony Vaio Jogdial as /devices/virtual/input/input7
- [ 3.242535] sony_laptop: brightness ignored, must be controlled by ACPI video driver
- [ 3.268775] usb 1-1.3: link qh16-0001/ffff880254d04700 start 3 [1/0 us]
- [ 3.268797] usb 1-1.3: unlink qh16-0001/ffff880254d04700 start 3 [1/0 us]
- [ 3.713717] hda_codec: ALC275: SKU not ready 0x411111f0
- [ 3.721338] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 3.722280] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.722296] i915 0000:00:02.0: setting latency timer to 64
- [ 3.856139] mtrr: no more MTRRs available
- [ 3.856146] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 3.856624] i915 0000:00:02.0: irq 49 for MSI/MSI-X
- [ 3.856635] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 3.856638] [drm] Driver supports precise vblank timestamp query.
- [ 3.857013] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 4.892244] usb 1-1.2: unlink qh1-0601/ffff8802551ddc00 start 0 [1/2 us]
- [ 4.892483] usb 1-1: clear tt buffer port 2, a4 ep2 t04048d80
- [ 5.774817] fb1: inteldrmfb frame buffer device
- [ 5.774820] drm: registered panic notifier
- [ 5.775018] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775024] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775030] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775035] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775040] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775046] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.775051] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [ 5.776073] acpi device:3e: registered as cooling_device4
- [ 5.776292] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input8
- [ 5.776322] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 5.776351] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 5.776846] modprobe used greatest stack depth: 3856 bytes left
- [ 6.921976] EXT4-fs (sdb2): re-mounted. Opts: discard
- [ 7.033335] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard
- [ 8.485708] Adding 1048572k swap on /dev/sdb1. Priority:-1 extents:1 across:1048572k SS
- [ 16.534337] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
- [ 16.541221] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
- [ 16.830205] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
- [ 16.837132] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
- [ 16.943913] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 22.190412] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
- [ 22.196863] r8169 0000:05:00.0: eth0: link down
- [ 22.198366] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 24.849753] ata1.00: configured for UDMA/133
- [ 24.849758] ata1: EH complete
- [ 24.856320] ata2.00: configured for UDMA/133
- [ 24.856325] ata2: EH complete
- [ 24.892031] EXT4-fs (sdb2): re-mounted. Opts: discard,commit=0
- [ 24.936457] EXT4-fs (sdb3): re-mounted. Opts: discard,commit=0
- [ 27.472591] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
- [ 27.479506] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
- [ 27.593334] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 27.659161] r8169 0000:05:00.0: eth0: link down
- [ 27.660652] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 27.695587] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
- [ 27.702499] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
- [ 27.813265] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 33.147499] wlan0: authenticate with 00:22:3f:4d:bc:12 (try 1)
- [ 33.149730] wlan0: authenticated
- [ 33.150036] wlan0: associate with 00:22:3f:4d:bc:12 (try 1)
- [ 33.154147] wlan0: RX AssocResp from 00:22:3f:4d:bc:12 (capab=0x411 status=0 aid=2)
- [ 33.154156] wlan0: associated
- [ 33.162938] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 38.546328] ehci_hcd 0000:00:1a.0: reused qh ffff880254d04700 schedule
- [ 38.546332] usb 1-1.3: link qh16-0001/ffff880254d04700 start 3 [1/0 us]
- [ 38.546376] usb 1-1.3: unlink qh16-0001/ffff880254d04700 start 3 [1/0 us]
- [ 43.519151] wlan0: no IPv6 routers present
- [ 57.713903] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 00:22:3f:4d:bc:12 tid = 0
- [ 326.144545] ehci_hcd 0000:00:1a.0: reused qh ffff880254d04700 schedule
- [ 326.144550] usb 1-1.3: link qh16-0001/ffff880254d04700 start 3 [1/0 us]
- [ 326.144590] usb 1-1.3: unlink qh16-0001/ffff880254d04700 start 3 [1/0 us]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement