API tools faq
paste
rdha1

smartctl

rdha1
Apr 1st, 2024
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.19 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.23-1-lts] (local build)
  2. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: TOSHIBA THNSNK128GCS8 SATA 128GB
  6. Serial Number: 77QB515WKLFU
  7. LU WWN Device Id: 5 00080d c008b0145
  8. Firmware Version: K8DC4101
  9. User Capacity: 128.035.676.160 bytes [128 GB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: Solid State Device
  12. Form Factor: 2.5 inches
  13. TRIM Command: Available, deterministic, zeroed
  14. Device is: Not in smartctl database 7.3/5528
  15. ATA Version is: ACS-3 (minor revision not indicated)
  16. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Mon Apr 1 15:00:42 2024 EEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 16) The self-test routine was aborted by
  29. the host.
  30. Total time to complete Offline
  31. data collection: ( 120) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 6) minutes.
  50. SCT capabilities: (0x003d) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 100
  59. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 12711
  60. 12 Power_Cycle_Count 0x0033 100 100 000 Pre-fail Always - 337
  61. 166 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
  62. 167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
  63. 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 13
  64. 173 Unknown_Attribute 0x0012 152 152 000 Old_age Always - 0
  65. 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 0
  66. 176 Erase_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 0
  67. 177 Wear_Leveling_Count 0x0033 052 052 010 Pre-fail Always - 0
  68. 178 Used_Rsvd_Blk_Cnt_Chip 0x0033 100 100 010 Pre-fail Always - 0
  69. 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 100
  70. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 100
  71. 181 Program_Fail_Cnt_Total 0x0033 100 100 010 Pre-fail Always - 100
  72. 182 Erase_Fail_Count_Total 0x0033 100 100 010 Pre-fail Always - 100
  73. 187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
  74. 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 315
  75. 194 Temperature_Celsius 0x0022 072 049 000 Old_age Always - 28 (Min/Max 18/51)
  76. 195 Hardware_ECC_Recovered 0x002b 100 100 000 Pre-fail Always - 0
  77. 199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
  78. 238 Unknown_Attribute 0x0032 052 052 010 Old_age Always - 0
  79. 241 Total_LBAs_Written 0x0013 100 100 000 Pre-fail Always - 515108
  80. 242 Total_LBAs_Read 0x0013 100 100 000 Pre-fail Always - 256916
  81.  
  82. SMART Error Log Version: 1
  83. ATA Error Count: 13 (device log contains only the most recent five errors)
  84. CR = Command Register [HEX]
  85. FR = Features Register [HEX]
  86. SC = Sector Count Register [HEX]
  87. SN = Sector Number Register [HEX]
  88. CL = Cylinder Low Register [HEX]
  89. CH = Cylinder High Register [HEX]
  90. DH = Device/Head Register [HEX]
  91. DC = Device Command Register [HEX]
  92. ER = Error register [HEX]
  93. ST = Status register [HEX]
  94. Powered_Up_Time is measured from power on, and printed as
  95. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  96. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  97.  
  98. Error 13 occurred at disk power-on lifetime: 8082 hours (336 days + 18 hours)
  99. When the command that caused the error occurred, the device was active or idle.
  100.  
  101. After command completion occurred, registers were:
  102. ER ST SC SN CL CH DH
  103. -- -- -- -- -- -- --
  104. 84 51 01 01 00 00 00
  105.  
  106. Commands leading to the command that caused the error were:
  107. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  108. -- -- -- -- -- -- -- -- ---------------- --------------------
  109. ec 00 00 00 00 00 00 00 00:02:51.770 IDENTIFY DEVICE
  110. ff ff ff ff ff ff ff ff 00:02:51.769 [VENDOR SPECIFIC]
  111. ef 90 06 00 00 00 00 00 00:02:51.718 SET FEATURES [Disable SATA feature]
  112. ec 00 00 00 00 00 00 00 00:02:51.698 IDENTIFY DEVICE
  113. ec 00 00 00 00 00 00 00 00:02:51.698 IDENTIFY DEVICE
  114.  
  115. Error 12 occurred at disk power-on lifetime: 7860 hours (327 days + 12 hours)
  116. When the command that caused the error occurred, the device was active or idle.
  117.  
  118. After command completion occurred, registers were:
  119. ER ST SC SN CL CH DH
  120. -- -- -- -- -- -- --
  121. 84 51 01 01 00 00 00
  122.  
  123. Commands leading to the command that caused the error were:
  124. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  125. -- -- -- -- -- -- -- -- ---------------- --------------------
  126. ec 00 00 00 00 00 00 00 02:47:46.565 IDENTIFY DEVICE
  127. ff ff ff ff ff ff ff ff 02:47:46.564 [VENDOR SPECIFIC]
  128. ef 90 06 00 00 00 00 00 02:47:46.513 SET FEATURES [Disable SATA feature]
  129. ec 00 00 00 00 00 00 00 02:47:46.493 IDENTIFY DEVICE
  130. ec 00 00 00 00 00 00 00 02:47:46.493 IDENTIFY DEVICE
  131.  
  132. Error 11 occurred at disk power-on lifetime: 2241 hours (93 days + 9 hours)
  133. When the command that caused the error occurred, the device was active or idle.
  134.  
  135. After command completion occurred, registers were:
  136. ER ST SC SN CL CH DH
  137. -- -- -- -- -- -- --
  138. 84 51 01 01 00 00 00
  139.  
  140. Commands leading to the command that caused the error were:
  141. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  142. -- -- -- -- -- -- -- -- ---------------- --------------------
  143. ec 00 00 00 00 00 00 00 00:00:15.305 IDENTIFY DEVICE
  144. ff ff ff ff ff ff ff ff 00:00:15.304 [VENDOR SPECIFIC]
  145. ef 90 06 00 00 00 00 00 00:00:15.253 SET FEATURES [Disable SATA feature]
  146. ec 00 00 00 00 00 00 00 00:00:15.233 IDENTIFY DEVICE
  147. ec 00 00 00 00 00 00 00 00:00:15.233 IDENTIFY DEVICE
  148.  
  149. Error 10 occurred at disk power-on lifetime: 2190 hours (91 days + 6 hours)
  150. When the command that caused the error occurred, the device was active or idle.
  151.  
  152. After command completion occurred, registers were:
  153. ER ST SC SN CL CH DH
  154. -- -- -- -- -- -- --
  155. 84 51 01 01 00 00 00
  156.  
  157. Commands leading to the command that caused the error were:
  158. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  159. -- -- -- -- -- -- -- -- ---------------- --------------------
  160. ec 00 00 00 00 00 00 00 00:00:58.007 IDENTIFY DEVICE
  161. ff ff ff ff ff ff ff ff 00:00:58.006 [VENDOR SPECIFIC]
  162. ef 90 06 00 00 00 00 00 00:00:57.955 SET FEATURES [Disable SATA feature]
  163. ec 00 00 00 00 00 00 00 00:00:57.935 IDENTIFY DEVICE
  164. ec 00 00 00 00 00 00 00 00:00:57.935 IDENTIFY DEVICE
  165.  
  166. Error 9 occurred at disk power-on lifetime: 2190 hours (91 days + 6 hours)
  167. When the command that caused the error occurred, the device was active or idle.
  168.  
  169. After command completion occurred, registers were:
  170. ER ST SC SN CL CH DH
  171. -- -- -- -- -- -- --
  172. 84 51 01 01 00 00 00
  173.  
  174. Commands leading to the command that caused the error were:
  175. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  176. -- -- -- -- -- -- -- -- ---------------- --------------------
  177. ec 00 00 00 00 00 00 00 00:46:52.456 IDENTIFY DEVICE
  178. ff ff ff ff ff ff ff ff 00:46:52.455 [VENDOR SPECIFIC]
  179. ef 90 06 00 00 00 00 00 00:46:52.404 SET FEATURES [Disable SATA feature]
  180. ec 00 00 00 00 00 00 00 00:46:52.384 IDENTIFY DEVICE
  181. ec 00 00 00 00 00 00 00 00:46:52.383 IDENTIFY DEVICE
  182.  
  183. SMART Self-test log structure revision number 1
  184. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  185. # 1 Short offline Aborted by host 00% 7014 -
  186. # 2 Short offline Aborted by host 00% 2526 -
  187. # 3 Short offline Aborted by host 00% 2243 -
  188. # 4 Short offline Completed without error 00% 2162 -
  189. # 5 Extended offline Completed without error 00% 2103 -
  190. # 6 Short offline Completed without error 00% 2103 -
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  194. 1 0 0 Not_testing
  195. 2 0 0 Not_testing
  196. 3 0 0 Not_testing
  197. 4 0 0 Not_testing
  198. 5 0 0 Not_testing
  199. Selective self-test flags (0x0):
  200. After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
  202.  
  203. The above only provides legacy SMART information - try 'smartctl -x' for more
  204.  
  205.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!