Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:16:21 CET 2014
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8dfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bff8e000-0x00000000bffdffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: System manufacturer Maximus Formula/Maximus Formula, BIOS 1403 09/10/2009
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0xbff80 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-DFFFF write-protect
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
- [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
- [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
- [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
- [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
- [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
- [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
- [ 0.000000] BRK [0x017ae000, 0x017aefff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x378ec000-0x37c6dfff]
- [ 0.000000] Allocated new RAMDISK: [mem 0x3747c000-0x377fd8bb]
- [ 0.000000] Move RAMDISK from [mem 0x378ec000-0x37c6d8bb] to [mem 0x3747c000-0x377fd8bb]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x000FBE70 000014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 0xBFF80000 00003C (v01 A_M_I_ OEMRSDT 09000910 MSFT 00000097)
- [ 0.000000] ACPI: FACP 0xBFF80200 000084 (v02 A_M_I_ OEMFACP 09000910 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 0xBFF80440 00A176 (v01 A0875 A0875002 00000002 INTL 20060113)
- [ 0.000000] ACPI: FACS 0xBFF8E000 000040
- [ 0.000000] ACPI: APIC 0xBFF80390 00006C (v01 A_M_I_ OEMAPIC 09000910 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 0xBFF80400 00003C (v01 A_M_I_ OEMMCFG 09000910 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 0xBFF8E040 000081 (v01 A_M_I_ AMI_OEM 09000910 MSFT 00000097)
- [ 0.000000] ACPI: HPET 0xBFF8A5C0 000038 (v01 A_M_I_ OEMHPET 09000910 MSFT 00000097)
- [ 0.000000] ACPI: OSFR 0xBFF8A600 0000B0 (v01 A_M_I_ OEMOSFR 09000910 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2183MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] BRK [0x017af000, 0x017affff] PGTABLE
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
- [ 0.000000] HighMem [mem 0x377fe000-0xbff7ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
- [ 0.000000] node 0: [mem 0x00100000-0xbff7ffff]
- [ 0.000000] On node 0 totalpages: 786205
- [ 0.000000] free_area_init_node: node 0, pgdat c162b2c0, node_mem_map f5c7c020
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4368 pages used for memmap
- [ 0.000000] HighMem zone: 558978 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
- [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f5c32000 s33536 r0 d23808 u57344
- [ 0.000000] pcpu-alloc: s33536 r0 d23808 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784429
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7be04356-440e-447b-ab92-6f33a92043ce rw quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 6290424 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff80)
- [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
- [ 0.000000] Memory: 3101468K/3144820K available (4550K kernel code, 492K rwdata, 1344K rodata, 580K init, 832K bss, 43352K reserved, 2235912K highmem)
- [ 0.000000] virtual kernel memory layout:
- fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc1640000 - 0xc16d1000 ( 580 kB)
- .data : 0xc1471c68 - 0xc163e2c0 (1841 kB)
- .text : 0xc1000000 - 0xc1471c68 (4551 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:2304 nr_irqs:456 0
- [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2838.382 MHz processor
- [ 0.003342] Calibrating delay loop (skipped), value calculated using timer frequency.. 5679.29 BogoMIPS (lpj=9461273)
- [ 0.003344] pid_max: default: 32768 minimum: 301
- [ 0.003350] ACPI: Core revision 20140724
- [ 0.011758] ACPI: All ACPI Tables successfully acquired
- [ 0.013353] Security Framework initialized
- [ 0.013359] Yama: becoming mindful.
- [ 0.013370] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.013372] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.013568] Initializing cgroup subsys memory
- [ 0.013574] Initializing cgroup subsys devices
- [ 0.013576] Initializing cgroup subsys freezer
- [ 0.013579] Initializing cgroup subsys net_cls
- [ 0.013581] Initializing cgroup subsys blkio
- [ 0.013599] CPU: Physical Processor ID: 0
- [ 0.013600] CPU: Processor Core ID: 0
- [ 0.013605] mce: CPU supports 6 MCE banks
- [ 0.013611] CPU0: Thermal monitoring enabled (TM2)
- [ 0.013618] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
- [ 0.013709] Freeing SMP alternatives memory: 20K (c16d1000 - c16d6000)
- [ 0.014281] ftrace: allocating 19545 entries in 39 pages
- [ 0.020044] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.020390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.059743] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (fam: 06, model: 17, stepping: 07)
- [ 0.059999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
- [ 0.059999] ... version: 2
- [ 0.059999] ... bit width: 40
- [ 0.059999] ... generic registers: 2
- [ 0.059999] ... value mask: 000000ffffffffff
- [ 0.059999] ... max period: 000000007fffffff
- [ 0.059999] ... fixed-purpose events: 3
- [ 0.059999] ... event mask: 0000000700000003
- [ 0.073447] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.076717] CPU 1 irqstacks, hard=f516a000 soft=f516c000
- [ 0.076719] x86: Booting SMP configuration:
- [ 0.076720] .... node #0, CPUs: #1
- [ 0.006666] Initializing CPU#1
- [ 0.093384] CPU 2 irqstacks, hard=f5198000 soft=f519a000
- [ 0.093387] #2
- [ 0.006666] Initializing CPU#2
- [ 0.106715] CPU 3 irqstacks, hard=f51e2000 soft=f51e4000
- [ 0.106717] #3
- [ 0.006666] Initializing CPU#3
- [ 0.119840] x86: Booted up 1 node, 4 CPUs
- [ 0.119843] smpboot: Total of 4 processors activated (22716.18 BogoMIPS)
- [ 0.120127] devtmpfs: initialized
- [ 0.120176] PM: Registering ACPI NVS region [mem 0xbff8e000-0xbffdffff] (335872 bytes)
- [ 0.123632] pinctrl core: initialized pinctrl subsystem
- [ 0.123668] RTC time: 13:13:59, date: 12/10/14
- [ 0.123755] NET: Registered protocol family 16
- [ 0.123860] cpuidle: using governor ladder
- [ 0.123863] cpuidle: using governor menu
- [ 0.123919] ACPI: bus type PCI registered
- [ 0.123922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.123992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.123995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.123996] PCI: Using MMCONFIG for extended config space
- [ 0.123997] PCI: Using configuration type 1 for base access
- [ 0.124120] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.124122] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.124123] mtrr: corrected configuration.
- [ 0.140060] ACPI: Added _OSI(Module Device)
- [ 0.140060] ACPI: Added _OSI(Processor Device)
- [ 0.140060] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.140060] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.141777] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.146871] ACPI: Dynamic OEM Table Load:
- [ 0.146877] ACPI: SSDT 0xF527A800 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.147258] ACPI: Dynamic OEM Table Load:
- [ 0.147262] ACPI: SSDT 0xF527AA00 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.147634] ACPI: Dynamic OEM Table Load:
- [ 0.147638] ACPI: SSDT 0xF527AC00 000143 (v01 AMI CPU3PM 00000001 INTL 20060113)
- [ 0.148013] ACPI: Dynamic OEM Table Load:
- [ 0.148017] ACPI: SSDT 0xF527AE00 000143 (v01 AMI CPU4PM 00000001 INTL 20060113)
- [ 0.148375] ACPI: Interpreter enabled
- [ 0.148392] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
- [ 0.148404] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.148405] ACPI: Using IOAPIC for interrupt routing
- [ 0.148433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.154421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.154426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.154430] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 0.154669] PCI host bridge to bus 0000:00
- [ 0.154672] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.154674] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.154676] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.154678] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.154679] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.154681] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
- [ 0.154689] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
- [ 0.154780] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
- [ 0.154813] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.154851] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.154915] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
- [ 0.154951] pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f]
- [ 0.155029] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.155076] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
- [ 0.155111] pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f]
- [ 0.155189] pci 0000:00:1a.1: System wakeup disabled by ACPI
- [ 0.155234] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
- [ 0.155270] pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f]
- [ 0.155349] pci 0000:00:1a.2: System wakeup disabled by ACPI
- [ 0.155401] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
- [ 0.155419] pci 0000:00:1a.7: reg 0x10: [mem 0xfafffc00-0xfaffffff]
- [ 0.155496] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.155539] pci 0000:00:1a.7: System wakeup disabled by ACPI
- [ 0.155588] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
- [ 0.155602] pci 0000:00:1b.0: reg 0x10: [mem 0xfaff8000-0xfaffbfff 64bit]
- [ 0.155664] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.155744] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
- [ 0.155807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.155850] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.155896] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
- [ 0.155958] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.156001] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.156047] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
- [ 0.156110] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.156153] pci 0000:00:1c.4: System wakeup disabled by ACPI
- [ 0.156197] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
- [ 0.156260] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.156303] pci 0000:00:1c.5: System wakeup disabled by ACPI
- [ 0.156350] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
- [ 0.156386] pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f]
- [ 0.156464] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.156510] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
- [ 0.156689] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f]
- [ 0.156767] pci 0000:00:1d.1: System wakeup disabled by ACPI
- [ 0.156813] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
- [ 0.156849] pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f]
- [ 0.156926] pci 0000:00:1d.2: System wakeup disabled by ACPI
- [ 0.156980] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
- [ 0.156999] pci 0000:00:1d.7: reg 0x10: [mem 0xfafff800-0xfafffbff]
- [ 0.157076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.157118] pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 0.157162] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.157237] pci 0000:00:1e.0: System wakeup disabled by ACPI
- [ 0.157283] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
- [ 0.157352] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
- [ 0.157356] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
- [ 0.157359] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.157461] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
- [ 0.157477] pci 0000:00:1f.2: reg 0x10: [io 0x8c00-0x8c07]
- [ 0.157484] pci 0000:00:1f.2: reg 0x14: [io 0x8880-0x8883]
- [ 0.157490] pci 0000:00:1f.2: reg 0x18: [io 0x8800-0x8807]
- [ 0.157497] pci 0000:00:1f.2: reg 0x1c: [io 0x8480-0x8483]
- [ 0.157504] pci 0000:00:1f.2: reg 0x20: [io 0x8400-0x841f]
- [ 0.157511] pci 0000:00:1f.2: reg 0x24: [mem 0xfaffe800-0xfaffefff]
- [ 0.157549] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.157628] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
- [ 0.157641] pci 0000:00:1f.3: reg 0x10: [mem 0xfafff400-0xfafff4ff 64bit]
- [ 0.157659] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
- [ 0.157781] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
- [ 0.157792] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
- [ 0.157803] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
- [ 0.157813] pci 0000:01:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
- [ 0.157820] pci 0000:01:00.0: reg 0x24: [io 0xac00-0xac7f]
- [ 0.157827] pci 0000:01:00.0: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
- [ 0.157917] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
- [ 0.157928] pci 0000:01:00.1: reg 0x10: [mem 0xfccfc000-0xfccfffff]
- [ 0.158048] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.158051] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
- [ 0.158054] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfccfffff]
- [ 0.158057] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
- [ 0.158106] pci 0000:00:1c.0: PCI bridge to [bus 05]
- [ 0.158114] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
- [ 0.158185] pci 0000:04:00.0: [11ab:4364] type 00 class 0x020000
- [ 0.158209] pci 0000:04:00.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
- [ 0.158219] pci 0000:04:00.0: reg 0x18: [io 0xd800-0xd8ff]
- [ 0.158258] pci 0000:04:00.0: reg 0x30: [mem 0xfcfc0000-0xfcfdffff pref]
- [ 0.158322] pci 0000:04:00.0: supports D1 D2
- [ 0.158324] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.163347] pci 0000:00:1c.2: PCI bridge to [bus 04]
- [ 0.163351] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.163354] pci 0000:00:1c.2: bridge window [mem 0xfcf00000-0xfcffffff]
- [ 0.163432] pci 0000:03:00.0: [197b:2368] type 00 class 0x010185
- [ 0.163463] pci 0000:03:00.0: reg 0x10: [io 0xcc00-0xcc07]
- [ 0.163476] pci 0000:03:00.0: reg 0x14: [io 0xc880-0xc883]
- [ 0.163488] pci 0000:03:00.0: reg 0x18: [io 0xc800-0xc807]
- [ 0.163501] pci 0000:03:00.0: reg 0x1c: [io 0xc480-0xc483]
- [ 0.163513] pci 0000:03:00.0: reg 0x20: [io 0xc400-0xc40f]
- [ 0.163537] pci 0000:03:00.0: reg 0x30: [mem 0xfcef0000-0xfcefffff pref]
- [ 0.163637] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.163646] pci 0000:00:1c.4: PCI bridge to [bus 03]
- [ 0.163650] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.163653] pci 0000:00:1c.4: bridge window [mem 0xfce00000-0xfcefffff]
- [ 0.163725] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
- [ 0.163748] pci 0000:02:00.0: reg 0x10: [mem 0xfcdfc000-0xfcdfffff 64bit]
- [ 0.163759] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
- [ 0.163797] pci 0000:02:00.0: reg 0x30: [mem 0xfcdc0000-0xfcddffff pref]
- [ 0.163861] pci 0000:02:00.0: supports D1 D2
- [ 0.163863] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.170013] pci 0000:00:1c.5: PCI bridge to [bus 02]
- [ 0.170017] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.170020] pci 0000:00:1c.5: bridge window [mem 0xfcd00000-0xfcdfffff]
- [ 0.170069] pci 0000:06:01.0: [14f1:8800] type 00 class 0x040000
- [ 0.170086] pci 0000:06:01.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
- [ 0.170206] pci 0000:06:03.0: [1106:3044] type 00 class 0x0c0010
- [ 0.170221] pci 0000:06:03.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
- [ 0.170230] pci 0000:06:03.0: reg 0x14: [io 0xec00-0xec7f]
- [ 0.170291] pci 0000:06:03.0: supports D2
- [ 0.170292] pci 0000:06:03.0: PME# supported from D2 D3hot D3cold
- [ 0.170367] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
- [ 0.170371] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.170374] pci 0000:00:1e.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.170379] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.170381] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.170383] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.170385] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.170387] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
- [ 0.170415] pci_bus 0000:00: on NUMA node 0
- [ 0.171237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.171288] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.171338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 0.171387] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
- [ 0.171437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.171487] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.171537] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.171586] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.171642] ACPI: Enabled 3 GPEs in block 00 to 3F
- [ 0.171686] vgaarb: setting as boot device: PCI:0000:01:00.0
- [ 0.171686] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.171686] vgaarb: loaded
- [ 0.171686] vgaarb: bridge control possible 0000:01:00.0
- [ 0.171686] PCI: Using ACPI for IRQ routing
- [ 0.176626] PCI: pci_cache_line_size set to 64 bytes
- [ 0.176680] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
- [ 0.176682] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
- [ 0.176787] NetLabel: Initializing
- [ 0.176788] NetLabel: domain hash size = 128
- [ 0.176789] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.176799] NetLabel: unlabeled traffic allowed by default
- [ 0.176822] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.176826] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.176830] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.178847] Switched to clocksource hpet
- [ 0.182238] pnp: PnP ACPI init
- [ 0.182306] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.182309] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.182364] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.182512] system 00:02: [io 0x0290-0x0297] has been reserved
- [ 0.182515] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.182664] system 00:03: [io 0x04d0-0x04d1] has been reserved
- [ 0.182667] system 00:03: [io 0x0800-0x087f] could not be reserved
- [ 0.182669] system 00:03: [io 0x0480-0x04bf] has been reserved
- [ 0.182671] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.182673] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.182676] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
- [ 0.182678] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
- [ 0.182680] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.182682] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
- [ 0.182684] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
- [ 0.182687] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.182784] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
- [ 0.182787] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.182859] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.182862] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.182864] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.182912] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.182981] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.182984] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.183383] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.183385] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.183388] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.183390] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
- [ 0.183392] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.183500] pnp: PnP ACPI: found 9 devices
- [ 0.220510] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
- [ 0.220513] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
- [ 0.220520] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
- [ 0.220527] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
- [ 0.220534] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
- [ 0.220543] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
- [ 0.220546] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
- [ 0.220549] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.220551] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.220553] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.220555] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.220559] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
- [ 0.220562] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
- [ 0.220564] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
- [ 0.220567] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
- [ 0.220570] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
- [ 0.220572] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.220574] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
- [ 0.220577] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfccfffff]
- [ 0.220580] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
- [ 0.220583] pci 0000:00:1c.0: PCI bridge to [bus 05]
- [ 0.220586] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- [ 0.220590] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
- [ 0.220593] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
- [ 0.220598] pci 0000:00:1c.2: PCI bridge to [bus 04]
- [ 0.220600] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
- [ 0.220604] pci 0000:00:1c.2: bridge window [mem 0xfcf00000-0xfcffffff]
- [ 0.220607] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
- [ 0.220612] pci 0000:00:1c.4: PCI bridge to [bus 03]
- [ 0.220614] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.220618] pci 0000:00:1c.4: bridge window [mem 0xfce00000-0xfcefffff]
- [ 0.220621] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
- [ 0.220626] pci 0000:00:1c.5: PCI bridge to [bus 02]
- [ 0.220628] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.220632] pci 0000:00:1c.5: bridge window [mem 0xfcd00000-0xfcdfffff]
- [ 0.220636] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
- [ 0.220640] pci 0000:00:1e.0: PCI bridge to [bus 06]
- [ 0.220643] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.220647] pci 0000:00:1e.0: bridge window [mem 0xfd000000-0xfebfffff]
- [ 0.220653] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.220655] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.220657] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.220659] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.220661] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.220662] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
- [ 0.220664] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfccfffff]
- [ 0.220666] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
- [ 0.220668] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
- [ 0.220670] pci_bus 0000:05: resource 1 [mem 0xc0000000-0xc03fffff]
- [ 0.220672] pci_bus 0000:05: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
- [ 0.220673] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
- [ 0.220675] pci_bus 0000:04: resource 1 [mem 0xfcf00000-0xfcffffff]
- [ 0.220677] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
- [ 0.220679] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 0.220681] pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff]
- [ 0.220683] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
- [ 0.220684] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
- [ 0.220686] pci_bus 0000:02: resource 1 [mem 0xfcd00000-0xfcdfffff]
- [ 0.220688] pci_bus 0000:02: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
- [ 0.220690] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
- [ 0.220692] pci_bus 0000:06: resource 1 [mem 0xfd000000-0xfebfffff]
- [ 0.220693] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
- [ 0.220695] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
- [ 0.220697] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.220699] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.220700] pci_bus 0000:06: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.220722] NET: Registered protocol family 2
- [ 0.220880] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.220891] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.220908] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.220928] TCP: reno registered
- [ 0.220930] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.220936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.220972] NET: Registered protocol family 1
- [ 0.222028] pci 0000:01:00.0: Video device with shadowed ROM
- [ 0.222047] PCI: CLS 32 bytes, default 64
- [ 0.222086] Unpacking initramfs...
- [ 0.284267] Freeing initrd memory: 3592K (f747c000 - f77fe000)
- [ 0.284491] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
- [ 0.284496] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
- [ 0.284505] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
- [ 0.284513] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
- [ 0.284561] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.284586] apm: BIOS not found.
- [ 0.284611] Scanning for low memory corruption every 60 seconds
- [ 0.284950] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.284972] Initialise system trusted keyring
- [ 0.285236] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.286903] zpool: loaded
- [ 0.286906] zbud: loaded
- [ 0.287002] VFS: Disk quotas dquot_6.5.2
- [ 0.287041] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.287187] msgmni has been set to 1697
- [ 0.287245] Key type big_key registered
- [ 0.287384] bounce: pool size: 64 pages
- [ 0.287420] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.287462] io scheduler noop registered
- [ 0.287464] io scheduler deadline registered
- [ 0.287498] io scheduler cfq registered (default)
- [ 0.287676] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.287724] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
- [ 0.287796] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.287924] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
- [ 0.288047] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
- [ 0.288172] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
- [ 0.288258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.288276] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.288310] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
- [ 0.288311] vesafb: scrolling: redraw
- [ 0.288313] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.288336] vesafb: framebuffer at 0xd7000000, mapped to 0xf8080000, using 8128k, total 8128k
- [ 0.338978] Console: switching to colour frame buffer device 240x67
- [ 0.389083] fb0: VESA VGA frame buffer device
- [ 0.389100] intel_idle: does not run on family 6 model 23
- [ 0.389124] GHES: HEST is not enabled!
- [ 0.389137] isapnp: Scanning for PnP cards...
- [ 0.700997] isapnp: No Plug & Play device found
- [ 0.701060] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.701626] rtc_cmos 00:01: RTC can wake from S4
- [ 0.701735] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
- [ 0.701758] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.701792] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.701903] TCP: cubic registered
- [ 0.702046] NET: Registered protocol family 10
- [ 0.702218] NET: Registered protocol family 17
- [ 0.702408] Using IPI No-Shortcut mode
- [ 0.702513] Loading compiled-in X.509 certificates
- [ 0.702526] registered taskstats version 1
- [ 0.702954] Magic number: 10:334:230
- [ 0.703016] rtc_cmos 00:01: setting system clock to 2014-12-10 13:14:00 UTC (1418217240)
- [ 0.703082] PM: Hibernation image not present or could not be loaded.
- [ 0.703289] Freeing unused kernel memory: 580K (c1640000 - c16d1000)
- [ 0.703306] Write protecting the kernel text: 4552k
- [ 0.703332] Write protecting the kernel read-only data: 1348k
- [ 0.708911] random: systemd-tmpfile urandom read with 0 bits of entropy available
- [ 0.725033] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.725035] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.725567] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.725585] ACPI: bus type USB registered
- [ 0.725618] usbcore: registered new interface driver usbfs
- [ 0.725632] usbcore: registered new interface driver hub
- [ 0.725678] usbcore: registered new device driver usb
- [ 0.726055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.726169] ehci-pci: EHCI PCI platform driver
- [ 0.726284] ehci-pci 0000:00:1a.7: EHCI Host Controller
- [ 0.726290] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.726307] ehci-pci 0000:00:1a.7: debug port 1
- [ 0.726359] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.730202] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.730215] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfafffc00
- [ 0.731934] SCSI subsystem initialized
- [ 0.733625] libata version 3.00 loaded.
- [ 0.736774] scsi host0: pata_jmicron
- [ 0.736881] scsi host1: pata_jmicron
- [ 0.736946] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
- [ 0.736948] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
- [ 0.740017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.740184] hub 1-0:1.0: USB hub found
- [ 0.740191] hub 1-0:1.0: 6 ports detected
- [ 0.740465] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 0.740470] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.740480] ehci-pci 0000:00:1d.7: debug port 1
- [ 0.744393] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.744406] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfafff800
- [ 0.753364] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.753513] hub 2-0:1.0: USB hub found
- [ 0.753520] hub 2-0:1.0: 6 ports detected
- [ 0.753784] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.753791] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.753797] uhci_hcd 0000:00:1a.0: detected 2 ports
- [ 0.753815] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
- [ 0.754015] hub 3-0:1.0: USB hub found
- [ 0.754023] hub 3-0:1.0: 2 ports detected
- [ 0.754210] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.754215] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.754220] uhci_hcd 0000:00:1a.1: detected 2 ports
- [ 0.754246] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
- [ 0.754403] hub 4-0:1.0: USB hub found
- [ 0.754411] hub 4-0:1.0: 2 ports detected
- [ 0.754577] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.754582] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.754587] uhci_hcd 0000:00:1a.2: detected 2 ports
- [ 0.754603] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
- [ 0.754761] hub 5-0:1.0: USB hub found
- [ 0.754768] hub 5-0:1.0: 2 ports detected
- [ 0.754934] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.754939] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.754944] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 0.754960] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
- [ 0.755122] hub 6-0:1.0: USB hub found
- [ 0.755129] hub 6-0:1.0: 2 ports detected
- [ 0.755291] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.755296] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.755301] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 0.755317] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
- [ 0.755470] hub 7-0:1.0: USB hub found
- [ 0.755476] hub 7-0:1.0: 2 ports detected
- [ 0.755636] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.755641] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.755646] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 0.755662] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
- [ 0.755812] hub 8-0:1.0: USB hub found
- [ 0.755819] hub 8-0:1.0: 2 ports detected
- [ 0.755923] ahci 0000:00:1f.2: version 3.0
- [ 0.756147] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
- [ 0.756182] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- [ 0.756210] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 0.756213] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
- [ 0.787384] scsi host2: ahci
- [ 0.787497] scsi host3: ahci
- [ 0.787607] scsi host4: ahci
- [ 0.787714] scsi host5: ahci
- [ 0.787822] scsi host6: ahci
- [ 0.787933] scsi host7: ahci
- [ 0.787992] ata3: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffe900 irq 29
- [ 0.787994] ata4: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffe980 irq 29
- [ 0.787996] ata5: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffea00 irq 29
- [ 0.787998] ata6: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffea80 irq 29
- [ 0.788000] ata7: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffeb00 irq 29
- [ 0.788002] ata8: SATA max UDMA/133 abar m2048@0xfaffe800 port 0xfaffeb80 irq 29
- [ 0.790036] firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 1.046687] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.173478] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 1.173557] scsi host8: usb-storage 1-1:1.0
- [ 1.173628] usbcore: registered new interface driver usb-storage
- [ 1.173945] usbcore: registered new interface driver uas
- [ 1.273350] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.274410] ata3.00: ATAPI: Optiarc DVD RW AD-7203S, 1.09, max UDMA/100
- [ 1.275773] ata3.00: configured for UDMA/100
- [ 1.276686] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.279041] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.09 PQ: 0 ANSI: 5
- [ 1.286683] tsc: Refined TSC clocksource calibration: 2838.579 MHz
- [ 1.290072] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c000134bc55, S400
- [ 1.720021] usb 2-2: new high-speed USB device number 3 using ehci-pci
- [ 1.773350] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.774192] ata4.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
- [ 1.774195] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.775040] ata4.00: configured for UDMA/133
- [ 1.775114] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZRX-00A 1A01 PQ: 0 ANSI: 5
- [ 2.177401] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 2.177902] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 2.178400] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 2.178900] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 2.181562] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 2.181564] sd 3:0:0:0: [sda] 4096-byte physical blocks
- [ 2.181608] sd 3:0:0:0: [sda] Write Protect is off
- [ 2.181611] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.181633] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.188016] sd 8:0:0:1: [sdc] Attached SCSI removable disk
- [ 2.189260] sd 8:0:0:3: [sde] Attached SCSI removable disk
- [ 2.198989] sda: sda1
- [ 2.199230] sd 3:0:0:0: [sda] Attached SCSI disk
- [ 2.199639] sd 8:0:0:2: [sdd] Attached SCSI removable disk
- [ 2.200272] sd 8:0:0:0: [sdb] Attached SCSI removable disk
- [ 2.260016] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.271536] ata5.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
- [ 2.271538] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.281450] ata5.00: configured for UDMA/133
- [ 2.281519] scsi 4:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5
- [ 2.281723] sd 4:0:0:0: [sdf] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
- [ 2.281809] sd 4:0:0:0: [sdf] Write Protect is off
- [ 2.281811] sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
- [ 2.281840] sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.282218] sdf: sdf1
- [ 2.282468] sd 4:0:0:0: [sdf] Attached SCSI disk
- [ 2.286734] Switched to clocksource tsc
- [ 2.600011] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.670014] usb 8-1: new full-speed USB device number 2 using uhci_hcd
- [ 2.859585] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.869328] usbcore: registered new interface driver usbhid
- [ 2.869330] usbhid: USB HID core driver
- [ 2.870021] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:046D:C068.0001/input/input1
- [ 2.870070] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.2-1/input0
- [ 2.874798] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:046D:C068.0002/input/input2
- [ 2.874887] hid-generic 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.2-1/input1
- [ 3.083347] usb 8-2: new full-speed USB device number 3 using uhci_hcd
- [ 3.086679] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.087697] ata7.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
- [ 3.087700] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 3.088766] ata7.00: configured for UDMA/133
- [ 3.088834] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
- [ 3.089025] sd 6:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.089064] sd 6:0:0:0: [sdg] Write Protect is off
- [ 3.089067] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
- [ 3.089083] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.145288] sdg: sdg1 sdg2 < sdg5 sdg6 sdg7 >
- [ 3.145633] sd 6:0:0:0: [sdg] Attached SCSI disk
- [ 3.261378] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:1532:010E.0003/input/input3
- [ 3.261428] hid-generic 0003:1532:010E.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:1d.2-2/input0
- [ 3.268804] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:1532:010E.0004/input/input4
- [ 3.268853] hid-generic 0003:1532:010E.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:1d.2-2/input1
- [ 3.272741] input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:1532:010E.0005/input/input5
- [ 3.272787] hid-generic 0003:1532:010E.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:1d.2-2/input2
- [ 3.573344] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.601819] ata8.00: ATA-8: ST3320613AS, CC2J, max UDMA/133
- [ 3.601821] ata8.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.643495] ata8.00: configured for UDMA/133
- [ 3.643565] scsi 7:0:0:0: Direct-Access ATA ST3320613AS CC2J PQ: 0 ANSI: 5
- [ 3.643762] sd 7:0:0:0: [sdh] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 3.643799] sd 7:0:0:0: [sdh] Write Protect is off
- [ 3.643802] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
- [ 3.643825] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.664741] sdh: sdh1 sdh2
- [ 3.664982] sd 7:0:0:0: [sdh] Attached SCSI disk
- [ 3.678255] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.678258] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.678398] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 3.736685] usb 7-1: new low-speed USB device number 2 using uhci_hcd
- [ 3.743354] floppy0: no floppy controllers found
- [ 3.858788] random: nonblocking pool is initialized
- [ 4.127131] hid-generic 0003:0764:0501.0006: hiddev0,hidraw5: USB HID v1.10 Device [CPS Value800ELCD] on usb-0000:00:1d.1-1/input0
- [ 4.711572] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.821276] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 7.857755] EXT4-fs (sdh1): re-mounted. Opts: data=ordered
- [ 9.430589] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
- [ 9.430594] ACPI: Power Button [PWRB]
- [ 9.430648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
- [ 9.430650] ACPI: Power Button [PWRF]
- [ 9.560895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 9.589856] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
- [ 9.589933] snd_hda_intel 0000:01:00.1: Disabling MSI
- [ 9.589940] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 9.590206] EDAC MC: Ver: 3.0.0
- [ 9.593121] EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
- [ 9.773796] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004ba (\GPS0) (20140724/utaddress-258)
- [ 9.773802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 9.773804] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004ba (\GPS0) (20140724/utaddress-258)
- [ 9.773807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 9.773808] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 9.811680] mousedev: PS/2 mouse device common for all mice
- [ 9.894089] sky2: driver version 1.30
- [ 9.894172] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
- [ 9.894217] sky2 0000:04:00.0: irq 31 for MSI/MSI-X
- [ 9.894434] sky2 0000:04:00.0 eth0: addr 00:1f:c6:73:61:45
- [ 9.894494] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
- [ 9.894536] sky2 0000:02:00.0: irq 32 for MSI/MSI-X
- [ 9.894732] sky2 0000:02:00.0 eth1: addr 00:1f:c6:73:69:ab
- [ 10.014646] ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140724/utaddress-258)
- [ 10.014652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 10.064049] input: PC Speaker as /devices/platform/pcspkr/input/input8
- [ 10.099705] media: Linux media interface: v0.10
- [ 10.186262] WARNING! power/level is deprecated; use power/control instead
- [ 10.415896] Linux agpgart interface v0.103
- [ 10.610373] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
- [ 10.610448] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
- [ 10.610517] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
- [ 10.610587] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
- [ 11.059471] Linux video capture interface: v2.00
- [ 11.108897] [drm] Initialized drm 1.1.0 20060810
- [ 11.113340] sound hdaudioC0D0: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
- [ 11.113341] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 11.113343] sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
- [ 11.113344] sound hdaudioC0D0: mono: mono_out=0x0
- [ 11.113345] sound hdaudioC0D0: dig-out=0x1b/0x0
- [ 11.113346] sound hdaudioC0D0: inputs:
- [ 11.113347] sound hdaudioC0D0: Front Mic=0x14
- [ 11.113349] sound hdaudioC0D0: Rear Mic=0x17
- [ 11.113350] sound hdaudioC0D0: Line=0x15
- [ 11.113351] sound hdaudioC0D0: CD=0x18
- [ 11.132135] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input13
- [ 11.132415] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 11.132480] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 11.132546] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
- [ 11.132611] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
- [ 11.132675] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
- [ 11.132741] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
- [ 11.132807] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
- [ 11.132871] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
- [ 11.133812] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
- [ 11.209739] systemd-journald[167]: Received request to flush runtime journal from PID 1
- [ 11.230445] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input22
- [ 11.230637] usbcore: registered new interface driver uvcvideo
- [ 11.230639] USB Video Class driver (1.1.1)
- [ 11.405888] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0
- [ 11.605196] iTCO_vendor_support: vendor-support=0
- [ 11.886910] All bytes are equal. It is not a TEA5767
- [ 11.886915] tuner 0-0060: Tuner -1 found with type(s) Radio TV.
- [ 11.986791] ntfs: driver 2.1.30 [Flags: R/W MODULE].
- [ 11.990575] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 11.990612] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
- [ 11.990713] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 12.033579] sky2 0000:04:00.0 enp4s0: renamed from eth0
- [ 12.055493] sky2 0000:02:00.0 enp2s0: renamed from eth1
- [ 12.077045] ntfs: volume version 3.1.
- [ 12.077049] ntfs: (device sda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
- [ 12.094749] tda9887 0-0043: creating new instance
- [ 12.094751] tda9887 0-0043: tda988[5/6/7] found
- [ 12.095539] tuner 0-0043: Tuner 74 found with type(s) Radio TV.
- [ 12.144366] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
- [ 12.579502] Adding 9765204k swap on /dev/sdh2. Priority:-1 extents:1 across:9765204k FS
- [ 12.594654] tuner-simple 0-0060: creating new instance
- [ 12.594657] tuner-simple 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
- [ 12.646680] Registered IR keymap rc-winfast
- [ 12.646767] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0/input23
- [ 12.646829] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/rc/rc0
- [ 12.646835] cx88[0]/0: found at 0000:06:01.0, rev: 5, irq: 17, latency: 64, mmio: 0xfd000000
- [ 12.649357] cx88[0]/0: registered device video1 [v4l2]
- [ 12.649475] cx88[0]/0: registered device vbi0
- [ 12.649511] cx88[0]/0: registered device radio0
- [ 12.796693] floppy0: no floppy controllers found
- [ 12.884137] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: discard
- [ 12.960602] EXT4-fs (sdg7): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.160953] usb 2-1: set resolution quirk: cval->res = 384
- [ 13.161104] usbcore: registered new interface driver snd-usb-audio
- [ 13.256395] nvidia: module license 'NVIDIA' taints kernel.
- [ 13.256399] Disabling lock debugging due to kernel taint
- [ 13.272780] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 13.273028] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 13.273036] NVRM: loading NVIDIA UNIX x86 Kernel Module 343.22 Thu Sep 11 15:36:14 PDT 2014
- [ 13.553837] cfg80211: Calling CRDA to update world regulatory domain
- [ 15.786879] sky2 0000:02:00.0 enp2s0: enabling interface
- [ 15.786965] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 18.753096] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
- [ 18.753116] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
- [ 31.693089] nvidia 0000:01:00.0: irq 33 for MSI/MSI-X
- [ 32.153608] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
- [ 32.157392] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1193)
- [ 32.157402] NVRM: rm_init_adapter failed for device bearing minor number 0
- [ 32.157425] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement