##############################################################################
# +------------------------------------------------------------------------+ #
# |                       LuckPerms Configuration                          | #
# |                  https://github.com/lucko/LuckPerms                    | #
# +------------------------------------------------------------------------+ #
##############################################################################

# +------------------------------------------------------------------------+ #
# |                               General                                  | #
# +------------------------------------------------------------------------+ #

# The name of the server, used for server specific permissions. Set to 'global' to disable.
server: global

# If users on this server should have their global permissions applied.
# If set to false, only server specific permissions will apply for users on this server
include-global: false

# If users on this server should have their global world permissions applied.
# If set to false, only world specific permissions will apply for users on this server
include-global-world: true

# If users on this server should have global (non-server specific) groups applied
apply-global-groups: true

# If users on this server should have global (non-world specific) groups applied
apply-global-world-groups: true

# If this server is in offline or online mode.
# This setting allows a player to have the same UUID across a network of offline mode/mixed servers.
#
# You should generally reflect the setting in server.properties here. Except when...
#
# 1. You have Spigot servers connected to a BungeeCord proxy, with online-mode set to false, but 'bungeecord' set to true in the spigot.yml
#    AND 'ip-forward' set to true in the BungeeCord config.yml
#    In this case, set online-mode in LuckPerms to true, despite the server being in offline mode.
#
# 2. You are only running one server instance using LuckPerms, (not a network)
#    In this case, set online-mode to true no matter what is set in server.properties. (we can just fallback to the servers uuid cache)
#
# 3. If your proxy is running in offline mode, and you are using PaperSpigot (https://ci.destroystokyo.com/job/PaperSpigot/),
#    you should set "bungee-online-mode" to false in the paper.yml, and set "online-mode" to true in all LuckPerms configs.
#    This approach is thoroughly recommended for offline mode networks.
online-mode: true

# If the plugin should send log notifications to users whenever permissions are modified.
log-notify: true

# Mirrors world names. Whenever LuckPerms checks what world a user is in, if the world name is in this list, the value assigned
# will be sent forward for permission calculation instead.
world-rewrite:
#  world_nether: world
#  world_the_end: world

# Rewrites group names. The underlying name of the group does not change, just the output in commands / placeholders / Vault.
group-name-rewrite:
#  default: Member

# Controls how temporary permissions/parents/meta should be accumulated
#
# The default behaviour is "deny"
# If "accumulate": durations will be added to the existing expiry time
# If "replace": durations will be replaced if the new duration is later than the current expiration
# If "deny": the command will just fail if you try to add another node with the same expiry
temporary-add-behaviour: deny




# +------------------------------------------------------------------------+ #
# |                        Permission Calculation                          | #
# +------------------------------------------------------------------------+ #

# If the plugin should apply wildcard permissions.
# If set to true, LuckPerms will detect wildcard permissions, and resolve & apply all registered permissions matching
# the wildcard.
apply-wildcards: true

# If the plugin should parse regex permissions.
# If set to true, LuckPerms will detect regex permissions, marked with "r=" at the start of the node, and resolve &
# apply all registered permissions matching the regex.
apply-regex: true

# If the plugin should complete and apply shorthand permissions.
# If set to true, LuckPerms will detect and expand shorthand node patterns.
apply-shorthand: true

# Define special group weights for this server.
# Default is just 0.
group-weight:
#  admin: 10




# +------------------------------------------------------------------------+ #
# |                      Meta Formatting & Stacking                        | #
# +------------------------------------------------------------------------+ #

# Allows you to setup prefix/suffix stacking options.
#
# Available formats:
# - highest
# - lowest
# - highest_own
# - lowest_own
# - highest_on_track_<track>
# - lowest_on_track_<track>
#
# Each element is added in the order listed.
meta-formatting:
  prefix:
    format:
      - "highest"
    start-spacer: ""
    middle-spacer: " "
    end-spacer: ""
  suffix:
    format:
      - "highest"
    start-spacer: ""
    middle-spacer: " "
    end-spacer: ""




# +------------------------------------------------------------------------+ #
# |                               Storage                                  | #
# +------------------------------------------------------------------------+ #

# Which storage method the plugin should use.
# Currently supported: mysql, postgresql, sqlite, h2, json, yaml, mongodb
# Fill out connection info below if you're using MySQL, PostgreSQL or MongoDB
storage-method: h2

# When using a file-based storage type, LuckPerms can monitor the data files for changes, and then schedule automatic
# updates when changes are detected.
#
# If you don't want this to happen, set this option to false.
watch-files: true

# This block enables support for split datastores.
split-storage:
  enabled: false
  methods:
    user: h2
    group: h2
    track: h2
    uuid: h2
    log: h2

data:
  # Uses standard DB engine port by default
  # MySQL: 3306, PostgreSQL: 5432, MongoDB: 27017
  # Specify as "host:port" if differs
  address: localhost

  database: rangi
  username: root
  password: Za57gDNP
  pool-size: 10 # The size of the MySQL connection pool.

  # The prefix for all LuckPerms tables. Change this is you want to use different tables for different servers.
  # This should *not* be set to "lp_" if you have previously ran LuckPerms v2.16.81 or earlier with this database.
  table_prefix: 'luckperms_'

  # This option controls how frequently LuckPerms will perform a sync task.
  # A sync task will refresh all data from the storage, and ensure that the most up-to-date data is being used by the plugin.
  #
  # This is disabled by default, as most users will not need it. However, if you're using a remote storage type
  # without a messaging service setup, you may wish to set this value to something like 3.
  #
  # Set to -1 to disable the task completely.
  sync-minutes: -1

# Settings for the messaging service
#
# If enabled and configured, LuckPerms will use the messaging system to inform other
# connected servers of changes. Use the command "/luckpermsbungee networksync" to push changes.
# Data is NOT stored using this service. It is only used as a messaging platform.
#
# If you decide to enable this feature, you should set "sync-minutes" to -1, as there is no need for LuckPerms
# to poll the database for changes.
#
# Available options:
# bungee ==> uses the plugin messaging channels. Must be enabled on all connected servers to work.
# redis ==> uses redis pub sub to push changes. Your redis server must be configured below.
# none ==> nothing
messaging-service: none

# Settings for Redis.
# Port 6379 is used by default; set address to "host:port" if differs
redis:
  enabled: false
  address: localhost
  password: ''




# +------------------------------------------------------------------------+ #
# |                         Default Assignments                            | #
# +------------------------------------------------------------------------+ #

# This section allows you to define defaults to give users whenever they connect to the server.
# The default assignments are highly configurable and conditional.
#
# There is one default assignment built into LuckPerms, which will add all users to the "default" group if they
# are not a member of any other group. This setting cannot be disabled. However, you can use this section to add more of
# your own.
#
# IMPORTANT:
# In order to save storage space, LuckPerms does not store users who have no permissions defined, and are only a member
# of the default group. Adding default assignments to this section will negate this effect. It is HIGHLY RECCOMENDED
# that instead of assigning defaults here, you add permissions to the "default" group, or set the "default" group to inherit
# other groups, and then use the group-name-rewrite rule above.
#
# It is also important to note that these rules are considered every time a player logs into the server, and are applied
# directly to the user's data. Simply removing a rule here will not reserse the effect of that rule on any users who have
# already had it applied to them.
#
# The "has" and "lacks" conditions below support standard boolean logic, using the 'and' & 'or' characters used in Java.
# e.g. "(some.other.permission | some.permission.other) & some.thing.else" == a user has 'some.other.permission', or
# 'some.permission.other', and they also have 'some.thing.else'
#
# Groups are represented by the permission node: group.<group name>
# Per server and per world nodes are represented by: "server-world/permission" or "server/permission"
#
# Within conditions, permission nodes MUST be escaped using "<" and ">". See the example below.
#
# Explanation of the examples below: (they're just to demonstrate the features & use cases)
#
# rule1:
# If a user is either in the vip or vip+ group, and they have the "titles.titlecollector" permission set to true, and the
# "some.random.permission" set to false... if they're not in the group "prison_titlepack" on the "prison" server, then
# give add them to the "prison_titlepack" group on the "prison" server, and remove "some.random.permission".
#
# rule2:
# If the user isn't in any of the following groups on the skyblock server: sb_level1, sb_level2, sb_level3, then add
# them to sb_level1 on the skyblock server.
#
# rule3:
# If the user is a member of the default group, remove them from default, add them to member, and set their primary group
# to member.
#
# WARNING: Unlike internal commands, this system does not ensure that a group exists before adding a user to it.
# It also does not unsure that a user is a member of a group before making that group their primary group.
#
# Before you use "give: group.<name>" or "set-primary-group", make sure that the group exists, and that the user is
# a member of the group.
default-assignments:
#  rule1:
#    if:
#      has-true: (<group.vip> | <group.vip+>) & <titles.tilecollector>
#      has-false: <some.random.permission>
#      lacks: <prison/group.prison_titlepack>
#    give:
#      - prison/group.prison_titlepack
#    take:
#      - some.random.permission
#  rule2:
#    if:
#      lacks: <skyblock/group.sb_level1> & <skyblock/group.sb_level2> & <skyblock/group.sb_level3>
#    give:
#      - skyblock/group.sb_level1
#  rule3:
#    if:
#      has-true: <group.default>
#    take:
#      - group.default
#    give:
#      - group.member
#    set-primary-group: member