New EspressoBin Firmware

TIM-1.0
WTMI-armada-17.10.5-34ce216
WTMI: system early-init
CPU VDD voltage default value: 1.155V

Fill memory before self refresh...done

Fill memory before self refresh...done

Now in Self-refresh Mode
Restore termination values to original values
Exited self-refresh ...


Self refresh Pass.
DDR self test mode test done!!

Self refresh Pass.
DDR self test mode test done!!

QS GATING
=============
Calibration done: cycle = 0x00 tap =0x62
CH0_PHY_RL_Control_CS0_B0[0xC0001180]: 0x00000062
CH0_PHY_RL_Control_CS0_B1[0xC0001184]: 0x00000062


QS GATING
=============
Calibration done: cycle = 0x00 tap =0x62
CH0_PHY_RL_Control_CS1_B0[0xC00011A4]: 0x00000062
CH0_PHY_RL_Control_CS1_B1[0xC00011A8]: 0x00000062

DLL TUNING
==============
   DLL 0xc0001050[21:16]: [0,27,13]
   DLL 0xc0001050[29:24]: [2,34,1b]
   DLL 0xc0001054[21:16]: [1,2b,16]
   DLL 0xc0001054[29:24]: [8,3b,21]
   DLL 0xc0001074[21:16]: [0,3f,1f]
   DLL 0xc0001074NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL1: Built : 16:46:16, May 10 2NOTICE:  BL2: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL2: Built : 16:46:16, May 10 2018
NNOTICE:  BL31: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL31:

U-Boot 2017.03-armada-17.10.3-g06ad760-armbian (May 10 2018 - 16:45:48 +0200)

Model: Marvell Armada 3720 Community Board ESPRESSOBin
       CPU    @ 1000 [MHz]
       L2     @ 800 [MHz]
       TClock @ 200 [MHz]
       DDR    @ 800 [MHz]
DRAM:  1 GiB
U-Boot DT blob at : 000000003f7182d8
Comphy-0: USB3          5 Gbps
Comphy-1: PEX0          2.5 Gbps
Comphy-2: SATA0         6 Gbps
Target spinup took 0 ms.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
MMC:   sdhci@d0000: 0
SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
Net:   eth0: neta@30000 [PRIME]
Hit any key to stop autoboot:  0
Marvell>>