Skyline coilover logs

2015-08-21 20:47:57  ★ Richard Hawkins would walk over to the the tool station, which is located right next to the Lift.
2015-08-21 20:49:21  ★ Richard Hawkins would then walk over to the control panel of the lift, as he then would pick up some plastic
2015-08-21 20:49:53  ★ pads as he then would make his way tot he front right of the car and crouches down as he-      ((Richard Hawkins))
2015-08-21 20:50:32  ★ reaches under the car with his right hand and checks the botton of the skirt for brake lines      ((Richard Hawkins))
2015-08-21 20:51:05  ★ and other small tubes that would not stand the weight of the car      ((Richard Hawkins))
2015-08-21 20:51:09  ★ .      ((Richard Hawkins))
2015-08-21 20:52:05  ★ Richard Hawkins would then reach for one of the plastic pads and places it under the ca.
2015-08-21 20:52:42  ★ Richard Hawkins would then repeat same process in every end of the skirt.
2015-08-21 20:53:11  ★ after he has placed down the plastic pads, he makes his way to the control panel of the lift      ((Richard Hawkins))
2015-08-21 20:53:34  ★ and pushes one of the buttonst to raise up the middle bit of the lift.      ((Richard Hawkins))
2015-08-21 20:54:08  ★ the lift would raise and there would be plastic pads between Lift and the skirts of the car.      ((Richard Hawkins))
2015-08-21 20:55:17  ★ as the vehicles wheels have risen off the ground, he takes his finger off the button and      ((Richard Hawkins))
2015-08-21 20:55:45  ★ makes his way to the car, as he then reaches for the handle of the driveside door      ((Richard Hawkins))
2015-08-21 20:56:29  ★ - , pulling it and opening the door. He would then reach for the lever to open the hood of-      ((Richard Hawkins))
2015-08-21 20:56:33  ★ the car.      ((Richard Hawkins))
2015-08-21 20:57:25  ★ Richard Hawkins would then make his way to the hood , as he then slides his fingers under there and
2015-08-21 20:57:41  ★ flicks a lever to release the hood.      ((Richard Hawkins))
2015-08-21 20:59:03  ★ Richard Hawkins would then lift the hood up and reaches for the hood rod with his right hand, as he
2015-08-21 20:59:19  ★ then slides it into the slot in the hood, to keep it open.      ((Richard Hawkins))
2015-08-21 20:59:58  ★ Richard Hawkins would then make his way to the toolstation , as he then reaches for the impact wrench
2015-08-21 21:00:02  ★ .      ((Richard Hawkins))
2015-08-21 21:01:17  ★ Richard Hawkins would then reach for the air pressure hose with his right hand as he then attempts to
2015-08-21 21:01:22  ★ connect them.      ((Richard Hawkins))
2015-08-21 21:02:01  ★ after they would be connected, Richard would make his way to the front left of the car, as-      ((Richard Hawkins))
2015-08-21 21:02:50  ★ keeps pulling the air pressure hose.      ((Richard Hawkins))
2015-08-21 21:03:13  ★ Richard Hawkins would then crouch down to the wheel of the car and switches the impact wrench
2015-08-21 21:03:33  ★ to rotate anti-clockwise.      ((Richard Hawkins))
2015-08-21 21:04:18  ★ Richard Hawkins would then place the impact wrench onto the first bolt as he then pushes on a button and
2015-08-21 21:04:36  ★ untightens the bolt.      ((Richard Hawkins))
2015-08-21 21:05:06  ★ Richard Hawkins proceeds to apply the same proceedure to other lugnuts.
2015-08-21 21:05:56  ★ the lugnuts would be somewhat popped out, as he places the impact wrench onto the ground-      ((Richard Hawkins))
2015-08-21 21:06:53  ★ and begins to slowly unscrew the lugnuts using his fingers.      ((Richard Hawkins))
2015-08-21 21:07:38  ★ Richard Hawkins would stuff the lugnuts into the pockets of his overalls.
2015-08-21 21:08:26  ★ Richard Hawkins would then place both of his hands onto the tire, as he then gives it a small nudge and
2015-08-21 21:08:35  ★ pulls it out of it's hub      ((Richard Hawkins))
2015-08-21 21:08:44  ★ .      ((Richard Hawkins))
2015-08-21 21:09:35  ★ Richard Hawkins would then take a small step back as he then rolls the wheel  couple of meters away from him
2015-08-21 21:09:37  ★ .      ((Richard Hawkins))
2015-08-21 21:10:33  ★ Richard Hawkins would then place the wheel onto its side, as he then makes his way ocer to toolstation.
2015-08-21 21:12:33  ★ Richard Hawkins would then reach for the drawer of the tool station, pulling it open.
2015-08-21 21:13:15  ★ Richard Hawkins owuld then search for the socket wrench and 13mm socket for it.
2015-08-21 21:15:12  ★ Richard Hawkins would then make his way back to the car, as he then crouches down and aims the socket-
2015-08-21 21:15:48  ★ towars the first bolt of the brakeline.      ((Richard Hawkins))
2015-08-21 21:16:24  ★ Richard Hawkins places it onto the bolt as he then begins to slowly unscrew the bolt out of it's position.  |
2015-08-21 21:17:22  ★ he'd proceed to do the same to the other bolt, as he places the bolst into the left pocket      ((Richard Hawkins))
2015-08-21 21:17:33  ★ of his overalls.      ((Richard Hawkins))
2015-08-21 21:18:57  ★ Richard Hawkins then works his way over to the fork's flange bolts, as he begins to closely screw them -
2015-08-21 21:20:00  ★ out , as he places them into the pockets of his overalls.      ((Richard Hawkins))
2015-08-21 21:22:15  ★ Richard Hawkins would then look over to the fork, as he places his hands onto it and proceeds to disconnect
2015-08-21 21:22:28  ★ it from the shock.      ((Richard Hawkins))
2015-08-21 21:23:21  ★ Richard Hawkins would then carry it to the tool station as he then places it onto it.
2015-08-21 21:24:30  ★ Richard Hawkins would then grab hsis socket wrnch again, as he then stands up and leans into the engine bay.
2015-08-21 21:24:58  Richard Hawkins: (( HIS* ))
2015-08-21 21:25:21  Richard Hawkins: (( wrench* ))
2015-08-21 21:26:33  ★ Richard Hawkins would then look at the right fender cover of the wheel, as he drives the socket wrench onto-
2015-08-21 21:27:17  ★ the flange bolts and begins to screw them out, as the damper gets loose and falls in through      ((Richard Hawkins))
2015-08-21 21:29:00  ★ He'd grab onto the bolts and place them into the pocket of his overall.      ((Richard Hawkins))
2015-08-21 21:29:06  Richard Hawkins: (( overalls* ))
2015-08-21 21:31:42  ★ Richard Hawkins would then crouch down to the exposed wheel hub, as he then grabs onto the damper and pulls-
2015-08-21 21:32:40  ★ it off, as he then stands up and makes his way over to the tool station with it.      ((Richard Hawkins))
2015-08-21 21:33:23  ★ Richard Hawkins would then place it onto the tool station, right next to the Fork.
2015-08-21 21:34:22  ★ Richard Hawkins would then reach for the hammer from the toolstation, as he goes back to the front of the-
2015-08-21 21:34:43  ★ car, as he then crouches down to the wheel hub.      ((Richard Hawkins))
2015-08-21 21:36:09  ★ as he then goes over to the shocks and Prys off the brake hose , using the hammer he took -      ((Richard Hawkins))
2015-08-21 21:36:44  ★ from the tool station.      ((Richard Hawkins))
2015-08-21 21:38:09  ★ as he then them both onto the ground, next to him.      ((Richard Hawkins))
2015-08-21 21:38:47  ★ Richard Hawkins would make his way to the trunk of the car and reaches for the button to open the trunk.
2015-08-21 21:39:04  ★ Richard Hawkins would press the button.
2015-08-21 21:39:43  ★ Richard Hawkins owuld then lift the trunk lid as he then reaches into there and wraps his hands around the
2015-08-21 21:40:12  ★ new Coilovers, which will be used on the car.      ((Richard Hawkins))
2015-08-21 21:40:53  ★ Richard Hawkins would then make his way to the front of his car, as he then bends down and places the box
2015-08-21 21:41:07  ★ with new coilovers onto the ground and opens it.      ((Richard Hawkins))
2015-08-21 21:42:08  ★ Richard Hawkins would then take out the set, as he then arranges them onto the ground, next to the car.
2015-08-21 21:43:05  ★ Richard Hawkins proceeds to pick up one of the front coilovers, as he goes back to the exposed wheel hub
2015-08-21 21:43:46  ★ of the car, where he crouches down with it, as he gently begins to slide it in through the      ((Richard Hawkins))
2015-08-21 21:44:54  ★ new shocks, as he keeps it still through the holes, as he grabs the flange bolts with his      ((Richard Hawkins))
2015-08-21 21:46:16  ★ other hand and leans over into the engine bay, where he'd begin to screw in the flange bolts      ((Richard Hawkins))
2015-08-21 21:46:58  ★ , as he then uses the 13mm socket wrench from the ground to tighten it in further.      ((Richard Hawkins))
2015-08-21 21:47:53  ★ Richard Hawkins then proceeds to go over next to the fork, as he picks up the brake hose mount and mounts it
2015-08-21 21:48:00  ★ back onto the new coilover set.      ((Richard Hawkins))
2015-08-21 21:49:05  ★ Richard Hawkins would then make his way to the tool station, as he then picks up the fork and goes back to
2015-08-21 21:49:11  ★ the car .      ((Richard Hawkins))
2015-08-21 21:50:21  ★ Richard Hawkins then crouches down to the exposed wheel hub, as he carefully slots in the fork.
2015-08-21 21:51:22  ★ Richard Hawkins would then reach into his pocket , as he then digs out the flange bolts and
2015-08-21 21:51:53  ★ begins to screw them in using the socket wrench, tightening them good...      ((Richard Hawkins))
2015-08-21 21:53:06  ★ Richard Hawkins would dig out brake hose mount bolts aswell, as he once again uses the wrench
2015-08-21 21:53:22  ★ to screw them into their place.      ((Richard Hawkins))
2015-08-21 21:54:15  ★ Richard Hawkins would go over to the front of the car, as he lifts up the wheel of the car and rolls it
2015-08-21 21:54:28  ★ down to the exposed hub.      ((Richard Hawkins))
2015-08-21 21:54:56  ★ Richard Hawkins would then lift up the wheel as he then moves it into position as he then digs out
2015-08-21 21:55:10  ★ the lugnuts and screwes them back on      ((Richard Hawkins))
2015-08-21 21:55:38  ★ Richard Hawkins would use the impact wrench to tighten up the lugnuts.
2015-08-21 21:56:13  ★ Richard Hawkins proceeds to apply the same process over to the other sides aswell, as he installs
2015-08-21 21:56:30  ★ in the new coilover set for the Nissan.      ((Richard Hawkins))
2015-08-21 21:56:49  ★ Richard Hawkins would then gather all his tools, as he then places them all bak to tool station.